USGS Science⌕ Search

SEARCH · USGS Science

Results for “Annual Review of Environment and Resources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 70Linked to original sources
USGS2024

Upper crustal seismic velocity structure of the Hayward fault zone, San Francisco Bay, California, USA: Results from the 2016 East Bay Seismic Experiment (EBSI-16)

We developed Vp, Vs, Vp / Vs ratio, and Poisson’s ratio models of the uppermost crust (<4 km depth) from the eastern San Francisco (SF) Bay (California, USA) to near the Calaveras fault along a 15-km-long, linear profile. Upper crustal velocities are highly variable beneath, west, and well east of the Hayward fault. We observe eight notable features, from west to east: (1) Near San Francisco Bay, there is an ~2-km-wide structure with high Vp / Vs ratios (up to 5) and Poisson’s ratios (up to 0.48) extending from the surface to the base of our model, which we suggest the structure is a near-vertical fault that lies along a straight-line projection between the Silver Creek fault to the south and the Point Richmond fault to the north. The structure may be part of an ~90-km-long fault along the eastern SF Bay. (2) The western East Bay Plain, the lower lying area between the bay and the hills, includes up to 800 m of low-velocity sediments ( Vp ~1600–3000 m/s, Vs ~500 m/s to ~1000 m/s), underlain by higher velocity basement rocks ( Vp ~3000–5800 m/s; Vs ~1000–1500 m/s). (3) Between ~1 km and 3 km east of the Bay shoreline, sediments thin in a series of steps (likely faults) toward the Hayward fault. (4) Between ~3 km west and ~1 km east of the Hayward fault (at the East Chabot fault) at depths greater than 1 km, basement Vp (up to 6000 m/s) and Vs (up to 2800 m/s) are high, and Vp / Vs ratios (<2) and Poisson’s ratios (<0.3) are low, suggesting crystalline rocks. Furthermore, a near-vertical zone of low Vp / Vs ratios and Poisson’s ratios is between near-surface traces of the Hayward and East Chabot faults, likely corresponding to the San Leandro Gabbro of Ponce et al. (2003) . (5) Eastward of the East Chabot fault in the upper 1.5 km, basement Vp (~3000 m/s to ~4200 m/s) and Vs (~1200–2000 m/s) are lower than those west of the fault. (6) In the eastern Hayward/Oakland Hills, there are zones of laterally varying, high- and low-velocity ( Vp ~2500–3000 m/s) Jurassic–Cretaceous and Tertiary sediments in the shallow subsurface that likely extend much deeper than imaged. (7) Seismic energy that propagates westward from sources east of the Hayward fault (HF) appear weaker than energy that propagates eastward from sources west of the HF, suggesting that the HF acts as a partial barrier to shallow seismic energy propagation into the more populated eastern SF Bay area. (8) Unlike many fault zones, it appears that the active trace of the Hayward fault (in our study area) is not cored by a prominent, low-velocity zone relative to rocks to the east and west of the active trace. However, the active trace does mark a prominent change from relatively higher velocities to the west and lower velocities to the east.

California↗
USGS2026

Deep critical zone controls on shallow landslides

The deep critical zone (CZ) has long been recognized for its importance in influencing shallow landslides but was not considered feasible to include in slope stability models at the watershed scale. In this study, we demonstrate that simple approximations of the CZ in a fully coupled hydrologic and soil slope stability model can effectively capture the location, timing, and likely size of shallow landslides. To achieve this, we use coupled, process-based models that incorporate the effects of 1) deep CZ structures, 2) three-dimensional transient hydrology, and 3) multidimensional slope stability, calibrated with data from an intensively monitored field site. Our results show that the hydrologically active deep CZ guides groundwater flow, influencing where it drains from or exfiltrates to the soil mantle, producing distinct patterns of soil saturation and seepage forces at the soil-bedrock boundary. Deep conductive weathered critical zone drains the soil mantle, reducing the likelihood of destabilizing pore pressures, while the downslope thinning of the CZ forces groundwater to the surface. This creates localized instability and a tendency for similar-sized landslides across the landscape. In contrast, the absence of conductive weathered bedrock results in more widespread destabilizing pore pressures, leading to larger landslides and the likelihood of landslides earlier in a storm than in landscapes underlain by a deep CZ. Our findings suggest that first-order variations of deep CZ can provide physical explanations for variations observed in the susceptibility, magnitude, and timing of shallow landslides, and that CZ structure may be inferred from patterns and timing of landsliding.

Proceedings of the National Academy of Sciences↗
USGS2026

Recycling radiogenic osmium by crustal foundering in subduction zones: Evidence from pyroxenite xenoliths in the north Andean arc

Removal of mafic-ultramafic lower crust (e.g., via delamination) is fundamental to making andesitic continental crust, yet direct evidence of this process remains elusive. A unique suite of garnet clinopyroxenite and hornblendite (arclogite) xenoliths from the northern volcanic zone of the Andes, erupted to the surface in the mid-Pleistocene, have bulk-rock geochemistry and osmium (Os) isotopic compositions that demonstrate their crustal affinity, yet have equilibration pressures and temperatures below the arc Mohorovičić discontinuity (~53 km) and some as deep as within the sub-arc mantle wedge (~105 km). Garnet websterites from the same xenolith suite, sourced from depths approaching the Wadati-Benioff zone (~140 km), have elemental and isotopic compositions indicative of a mantle origin, likely formed as products of peridotite-liquid reactions above the subducting slab. Variability in bulk-rock 143 Nd/ 144 Nd values and garnet oxygen isotope ratios ( 𝛿 18 O) for these samples is attributed to minor assimilation of subducted components and/or older crustal material, but assimilation alone cannot account for the highly radiogenic Os isotopic compositions. These results provide direct petrologic evidence for modern arclogite formation and foundering in the Andean orogen, the archetypal active continental subduction system. Elevated 187 Os/ 188 Os values of Mercaderes arclogites imply that recycling of gravitationally unstable arc cumulates during continental crust formation introduces highly radiogenic Os into the convective mantle, which has implications for mass fluxes across the crust-mantle boundary as well as the sources and evolution of mantle heterogeneity as seen in orogenic peridotite massifs and in the sources of oceanic basalts

Earth and Planetary Science Letters↗
USGS2024

Nitrogen deposition weakens soil carbon control of nitrogen dynamics across the contiguous United States

Anthropogenic nitrogen (N) deposition is unequally distributed across space and time, with inputs to terrestrial ecosystems impacted by industry regulations and variations in human activity. Soil carbon (C) content normally controls the fraction of mineralized N that is nitrified ( ƒ nitrified ), affecting N bioavailability for plants and microbes. However, it is unknown whether N deposition has modified the relationships among soil C, net N mineralization, and net nitrification. To test whether N deposition alters the relationship between soil C and net N transformations, we collected soils from coniferous and deciduous forests, grasslands, and residential yards in 14 regions across the contiguous United States that vary in N deposition rates. We quantified rates of net nitrification and N mineralization, soil chemistry (soil C, N, and pH), and microbial biomass and function (as beta-glucosidase (BG) and N -acetylglucosaminidase (NAG) activity) across these regions. Following expectations, soil C was a driver of ƒ nitrified across regions, whereby increasing soil C resulted in a decline in net nitrification and ƒ nitrified . The ƒ nitrified value increased with lower microbial enzymatic investment in N acquisition (increasing BG:NAG ratio) and lower active microbial biomass, providing some evidence that heterotrophic microbial N demand controls the ammonium pool for nitrifiers. However, higher total N deposition increased ƒ nitrified , including for high soil C sites predicted to have low ƒ nitrified , which decreased the role of soil C as a predictor of ƒ nitrified . Notably, the drop in contemporary atmospheric N deposition rates during the 2020 COVID-19 pandemic did not weaken the effect of N deposition on relationships between soil C and ƒ nitrified . Our results suggest that N deposition can disrupt the relationship between soil C and net N transformations, with this change potentially explained by weaker microbial competition for N. Therefore, past N inputs and soil C should be used together to predict N dynamics across terrestrial ecosystems.

contiguous United States↗
USGS2025

Linking stream-reach nitrogen loads and groundwater “reachsheds” to inform wastewater-nitrogen management actions, Cape Cod, Massachusetts

Study Region Cape Cod, Massachusetts, U.S.A. Study Focus Anthropogenic nitrogen (N) is a key factor in degrading groundwater and surface-water quality, particularly in coastal New England where onsite wastewater systems are prevalent. This study evaluated whether direct N-load measurements in streams on Cape Cod, Massachusetts, coupled with flow-path information from groundwater-flow models, can effectively identify potential land areas where nitrogen mitigation could substantially reduce loads to receiving waters. Nitrogen fluxes were measured along 63 stream reaches during winter and summer and paired with simulated groundwater recharge areas to identify and rank potential areas for reduction of nonpoint-source N inputs. New Hydrologic Insights for the Region Reach-scale nitrate-N loads ranged from −39.1–1182 kg-N/yr per 100 m of stream, indicating spatially variable groundwater inputs across seasons. “Reachsheds” — areas contributing groundwater recharge to specific stream reaches — were delineated using a regional groundwater-flow model. Strong correlations were found between observed N loads and land-use characteristics, especially the number of septic systems and total N inputs from the sum of considered sources. Observed N loads were moderately correlated with recharge area size and wastewater flow estimates. Correlating reach-specific groundwater N loads with land use and parcel-scale nitrogen-yield data identified reachsheds with the highest potential for N load reduction. This approach enables targeted implementation of restoration efforts to optimize nutrient management and support regional load reduction.

Massachusetts↗
USGS2025

A high-resolution 3-D P-wave velocity structure of the south-central Cascadia subduction zone from wide-angle shore-crossing seismic refraction data

This study addresses a significant gap in understanding the features of the south-central Cascadia subduction zone, a region characterized by complex geologic, tectonic, and seismic transitions both offshore and onshore. Unlike other segments along this margin, this area lacks a 3-D velocity model to delineate its structural and geological features on a fine scale. To address this void, we developed a high-resolution 3-D P-wave velocity model using active source seismic data from ship-borne seismic shots recorded on temporary and permanent onshore seismic stations and ocean-bottom seismometers. Our model shows velocity variations across the region with distinct velocity-depth profiles for the Siletz, Franciscan, and Klamath terranes in the overlying plate. We identified seaward dipping high-velocity static backstops associated with the Siletz and Klamath terranes, situated near the shoreline and further inland, respectively. Regions of reduced crustal velocity are associated with crustal faults. Moreover, there is significant along-strike depth variation in the subducting slab, which is about 4 km deeper near the thick, dense Siletz terrane and becomes shallower near the predominantly less-dense Franciscan terrane. This highlights a sudden tectonic and geologic transition at the southern boundary of the Siletz terrane. Our velocity model also indicates slightly increased hydration, though still minimal, in both the oceanic crust and the upper mantle of the subducting plate compared to other parts of the margin.

British Columbia, California, Oregon, Washington↗
USGS2024

On the provenance of field reports of the 1886 Charleston, South Carolina, earthquake: A seismo-historical whodunnit

Much of what is known about the effects of the 1886 Charleston, South Carolina, earthquake throughout the epicentral region can be attributed to meticulous field investigations by an individual with training in geology and engineering, Earle Sloan ( Clendenin, 1926 ). In a recent study, Bilham and Hough (2024) undertook a detailed analysis of the effects of the earthquake on railroads in the Charleston region, drawing heavily from Sloan’s reports. This exercise identified several inconsistencies in Sloan’s field reports, including understandable measurement imprecision, inferred data entry mistakes, and transcription errors. The study also begged the question, where was Sloan at the time of the mainshock and over the following week? And to what extent did he draw from secondhand information in compiling his reports? On this question Sloan’s reports were sometimes enigmatic, lending themselves to misinterpretation in contemporaneous as well as modern interpretations. Beyond the details that were germane for, and briefly summarized by, the studies of Bilham and Hough (2023 , 2024) , in this report we don our historical seismologist caps to chronicle Sloan’s activities following the earthquake. We summarize our inferences here for the benefit of future scholars who might attempt to retrace either Sloan’s footsteps or our own. This study also serves to highlight Sloan’s singular contributions to earthquake science, which were never published separately.

South Carolina↗
USGS2025

A generalized deep learning model to detect and classify volcano seismicity

Volcano seismicity is often detected and classified based on its spectral properties. However, the wide variety of volcano seismic signals and increasing amounts of data make accurate, consistent, and efficient detection and classification challenging. Machine learning (ML) has proven very effective at detecting and classifying tectonic seismicity, particularly using Convolutional Neural Networks (CNNs) and leveraging labeled datasets from regional seismic networks. Progress has been made applying ML to volcano seismicity, but efforts have typically been focused on a single volcano and are often hampered by the limited availability of training data. We build on the method of Tan et al. [2024] ( 10.1029/2024JB029194 ) to generalize a spectrogram-based CNN termed the VOlcano Infrasound and Seismic Spectrogram Neural Network ( VOISS-Net ) to detect and classify volcano seismicity at any volcano. We use a diverse training dataset of over 270,000 spectrograms from multiple volcanoes: Pavlof, Semisopochnoi, Tanaga, Takawangha, and Redoubt volcanoes\replaced (Alaska, USA); Mt. Etna (Italy); and Kīlauea, Hawai`i (USA). These volcanoes present a wide range of volcano seismic signals, source-receiver distances, and eruption styles. Our generalized VOISS-Net model achieves an accuracy of 87 % on the test set. We apply this model to continuous data from several volcanoes and eruptions included within and outside our training set, and find that multiple types of tremor, explosions, earthquakes, long-period events, and noise are successfully detected and classified. The model occasionally confuses transient signals such as earthquakes and explosions and misclassifies seismicity not included in the training dataset (e.g. teleseismic earthquakes). We envision the generalized VOISS-Net model to be applicable in both research and operational volcano monitoring settings.

Volcanica↗
USGS2024

Probabilistic assessment of postfire debris-flow inundation in response to forecast rainfall

Communities downstream of burned steep lands face increases in debris-flow hazards due to fire effects on soil and vegetation. Rapid postfire hazard assessments have traditionally focused on quantifying spatial variations in debris-flow likelihood and volume in response to design rainstorms. However, a methodology that provides estimates of debris-flow inundation downstream of burned areas based on forecast rainfall would provide decision-makers with information that directly addresses the potential for downstream impacts. We introduce a framework that integrates a 24 h lead-time ensemble precipitation forecast with debris-flow likelihood, volume, and runout models to produce probabilistic maps of debris-flow inundation. We applied this framework to simulate debris-flow inundation associated with the 9 January 2018 debris-flow event in Montecito, California, USA. When the observed debris-flow volumes were used to drive the probabilistic forecast model, analysis of the simulated inundation probabilities demonstrates that the model is both reliable and sharp. In the fully predictive model, however, in which debris-flow likelihood and volume were computed from the atmospheric model ensemble's predictions of peak 15 min rainfall intensity, I 15 , the model generally under-forecasted the inundation area. The observed peak I 15 lies in the upper tail of the atmospheric model ensemble spread; thus a large fraction of ensemble members forecast lower I 15 than observed. Using these I 15 values as input to the inundation model resulted in lower-than-observed flow volumes which translated into under-forecasting of the inundation area. Even so, approximately 94 % of the observed inundated area was forecast to have an inundation probability greater than 1 %, demonstrating that the observed extent of inundation was generally captured within the range of outcomes predicted by the model. Sensitivity analyses indicate that debris-flow volume and two parameters associated with debris-flow mobility exert significant influence on inundation predictions, but reducing uncertainty in postfire debris-flow volume predictions will have the largest impact on reducing inundation outcome uncertainty. This study represents a first step toward a near-real-time hazard assessment product that includes probabilistic estimates of debris-flow inundation and provides guidance for future improvements to this and similar model frameworks by identifying key sources of uncertainty.

California↗
USGS2025

Evaluating mass flow meter measurements from chambers for greenhouse gas emissions from orphan wells and other point sources

This study evaluates the performance of a rigid gas flux chamber equipped with a mass flow meter (MFM) for measuring gas emissions from leaking orphan wells and similar pressure-driven gas point sources. We conducted a series of laboratory and field experiments to evaluate the sensitivity, stability, and dynamic range of an MFM chamber system and found an optimal method for sealing the chamber to the ground to isolate the emission source. From these results, we estimate the effects of different soil gas permeabilities on measurements and identify the uncertainty of environmental processes that can impact measurements. Simulations of an MFM chamber are compared to those of a dynamic flux chamber to contrast the data derived with both methodologies and illustrate the potential for measuring high variability leaks with the MFM chamber. Using a low flow resistance MFM and a chamber well-sealed to the ground, it is possible to measure leaks down to 1.08 x 10 -3 cubic meters per hour (m 3 h −1 ) (refenced to 25°/1 atm), corresponding to 0.77 grams per hour (g h −1 ) methane or 2.11 g h −1 carbon dioxide, with a mean uncertainty of 0.89 % relative standard deviation. Environmental processes such as heated gas inside the chamber from solar gain, wind blowing across the chamber vent, and changing humidity in the chamber, can cause variation in MFM measurements. Over 11 d of continuous monitoring under varying weather conditions, the standard deviation of the environmentally sourced signals was found to be 7.40 x 10 -3 m 3 h −1 (equivalent to or 5.27 g h −1 methane or 14.45 g h −1 carbon dioxide). Strategies to obtain the highest quality data from MFM chambers include burying the edges of the chamber below the surface sufficiently deep to seal the chamber edges against gas flow and soaking the dirt with water to lower the chances of escaping gases, while monitoring the gas flow and adjusting the chamber seal to achieve a maximum flow rate.

Atmospheric Measurement Techniques↗
USGS2026

Multi-site evaluation of a postfire debris-flow runout forecast method

Postfire debris flows pose a hazard to human life, property, and infrastructure when they travel from steep source areas to urbanized alluvial fans or other developed areas. Existing methods for rapid (<1 week) postfire debris-flow hazard assessment document the increase in the likelihood and size of debris flows as the magnitude of high-intensity rain necessary to initiate debris flows increases but do not indicate the extent of downstream debris-flow runout. Although many models for the simulation of debris-flow motion are available, there is no established approach for using these models to delineate locations susceptible to postfire debris-flow runout that (a) is feasible to use at the spatial scale of an entire fire; (b) is appropriate for runout onto unconfined areas; (c) reproduces observed relations between runout and rainfall intensity; and (d) characterizes inherent uncertainty in runout, even without spatiotemporally variable rainfall. We propose and evaluate a method for generating postfire debris-flow runout hazard maps that has all the above qualities. Selection of case studies prioritized events triggered by a range of rainfall intensities, locations within and outside of southern California, and observed runout onto unconfined topography. Qualitative and quantitative assessment of performance for four events indicate that simulation results broadly match observations albeit with some discrepancies at a scale larger than structure or land parcel level (approximately 20-m by 20-m). The method may be used to identify potentially hazardous areas immediately following a fire and to provide approximate runout forecasts when a storm is imminent.

Arizona, California↗
USGS2025

The feasibility of using lidar-derived digital elevation models for gravity data reduction

Gravity data require submeter elevation accuracy for data processing, and differential global navigation satellite system (dGNSS) equipment is commonly used to acquire three-dimensional positional data to achieve such accuracy. However, lidar (light detection and ranging) data are commonly used to develop digital elevation models (DEMs) of Earth’s surface. Therefore, using elevations from lidar-derived DEMs for gravity-data acquisition and reduction may improve field efficiency and reduce cost. This study examines the feasibility of using DEMs for gravity-data reduction by comparing dGNSS elevation data from 435 gravity stations in Michigan, Wyoming, and Colorado with their respective DEM elevations. The results show that the average difference between DEM and dGNSS elevations is 13 centimeters (cm) and that 93 percent of those differences are less than 50 cm, even in areas with steep terrain. Because an elevation discrepancy of 50 cm corresponds to an error of roughly 0.1 milligals (mGal) in the simple Bouguer gravity anomaly, the results suggest that lidar-derived DEMs are a viable source for acquiring the elevation data needed to process gravity data, thus improving both the cost and efficiency of data collection for regional surveys where an accuracy of less than 1.0 mGal is desired.

Open-File Report↗
USGS2025

Risk implications of Poisson assumptions and declustering inferred from a fully time-dependent earthquake forecast

We use the Third Uniform California Earthquake Rupture Forecast Epidemic Type Aftershock Sequence model, which is fully time-dependent in terms of including spatiotemporal clustering, to evaluate the effects of the Poisson assumption and declustering algorithms on statewide loss exceedance curves. The model is simulation based, meaning it produces synthetic catalogs that exhibit realistic behavior with respect to aftershocks and multi-fault earthquakes. A Poisson version of the model was constructed by randomizing event times, and the influence of two declustering algorithms was examined as well. We demonstrate that the probability of one-or-more loss exceedances (occurrence exceedance probability) is greater for the Poisson model because it has fewer seismically quiet time windows. The discrepancy between dollar loss estimates with a given exceedance probability is up to a factor of 32% but varies depending on the loss threshold (the x-axis value) and the forecast duration (we examined a range between 24 h and 50 years, with the discrepancy for the latter being negligible). We discuss how the one-or-more loss exceedance metric is questionable because it ignores all but the maximum loss experienced in each timeframe. An alternative metric based on total aggregate loss in each time window (aggregate exceedance probability) was therefore also examined, for which the Poisson model again implies higher risk at intermediate losses but lower risk at higher losses (because large, triggered events now contribute to total aggregate losses for the fully time-dependent model). We also argue that declustering is not a scientifically justifiable way to deal with full time dependence, in agreement with a chorus from other recent studies. It is difficult to draw generally applicable conclusions from our study, in part because application specific details will likely be important, but our results highlight how full time dependence can be reckoned with once authoritative forecast models are made available.

California↗
USGS2024

Environmental monitoring of groundwater, surface water, and soil at the Ammonium Perchlorate Rocket Motor Destruction Facility at the Letterkenny Army Depot, Chambersburg, Pennsylvania, 2021

Letterkenny Army Depot in Chambersburg, Pennsylvania, built an Ammonium Perchlorate Rocket Motor Destruction (ARMD) Facility in 2016 to centralize rocket motor destruction and contain all waste during the destruction process. The U.S. Geological Survey has collected environmental samples from groundwater, surface water, and soils at ARMD since 2016. During 2021, samples were collected from four groundwater wells in September, one surface-water site in October, and five soil sites in November near the facility. Samples were analyzed for nutrients, trace metals, major ions, total volatile organic compounds, and perchlorate. Perchlorate was not detected in any 2021 samples. Groundwater results showed no constituents exceeded any U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL). Dissolved arsenic (As) was detected in one well above the reporting detection level (RDL) of 3 micrograms per liter (μg/L) at 5.4 μg/L but below its MCL of 10 μg/L. Dissolved iron (Fe) was the only inorganic constituent measured above an EPA secondary maximum contaminant level (SMCL). All groundwater samples collected in 2021 exceeded the Fe SMCL of 300 μg/L, with concentrations ranging from 390 μg/L to 3,500 μg/L. Surface-water data collected during 2021 showed no measured constituents in the surface-water sample that exceeded any EPA MCL or SMCL. Soil samples collected from 2016 through 2021 showed all concentrations of As exceeded the EPA soil screening levels of 3 milligrams per kilogram (mg/kg) but did not exceed the Pennsylvania medium-specific concentrations for As of 61 mg/kg. Arsenic concentrations in 2021 ranged from 9.1 mg/kg to 12.9 mg/kg. The 2021 results for the ARMD Facility indicate no increases in concentrations of reported compounds compared to data from 2016 to 2020. The contained burn treatment facility for demilitarization of rocket motors during 2021 appears to have operated without elevating concentrations of target compounds compared to previous years.

Pennsylvania↗
USGS2026

Selected water-quality data from the Cedar River and Cedar Rapids well fields, Cedar Rapids, Iowa, 2017–22

The Cedar River alluvial aquifer is the source of drinking water in Cedar Rapids, Iowa. Production wells are completed in the alluvial aquifer approximately 40 to 80 feet below land surface. The City of Cedar Rapids and the U.S. Geological Survey have studied the groundwater-flow system and water quality of the aquifer in the vicinity of Cedar Rapids since 1992. Results of these studies documented hydrologic conditions, water quality, and geochemistry of the alluvial aquifer and interactions with the Cedar River. Water-quality samples were collected for studies involving well field monitoring, trends, source-water protection, groundwater geochemistry, surface-water–groundwater interaction, and pesticides in groundwater and surface water. Water quality was analyzed for dissolved major ions (boron, bromide, calcium, chloride, fluoride, iron, magnesium, manganese, potassium, silica, sodium, sulfate, and total dissolved solids), dissolved nutrients (ammonia as nitrogen, ammonia plus organic nitrogen as nitrogen, nitrite plus nitrate as nitrogen, nitrite as nitrogen, orthophosphate as phosphorus, and phosphorus), dissolved organic carbon, and selected pesticides. Physical characteristics (alkalinity, dissolved oxygen, pH, specific conductance, and water temperature) were measured on site and recorded for each water sample collected. This report presents the results of routine water-quality data-collection activities from October 2017 through September 2022. Methods of data collection, quality assurance, water-quality analyses, and statistical procedures are presented. Data include the results of water-quality analyses from quarterly sampling from monitoring wells, production wells, two water treatment plants, and the Cedar River at Blairs Ferry Road at Palo, Iowa, streamgage (U.S. Geological Survey station number 05464420), as well as monthly nutrient sampling from the Cedar River and Morgan Creek near Covington, Iowa, streamgage (U.S. Geological Survey station number 05464475).

Iowa↗
USGS2024

Utility of an instantaneous salt dilution method for measuring streamflow in headwater streams

Streamflow records are biased toward large streams and rivers, yet small headwater streams are often the focus of ecological research in response to climate change. Conventional flow measurement instruments such as acoustic Doppler velocimeters (ADVs) do not perform well during low-flow conditions in small streams, truncating the development of rating curves during critical baseflow conditions dominated by groundwater inflow. We revisited an instantaneous solute tracer injection method as an alternative to ADVs based on paired measurements to compare their precision, efficiency, and feasibility within headwater streams across a range of flow conditions. We show that the precision of discharge measurements using salt dilution by slug injection and ADV methods were comparable overall, but salt dilution was more precise during the lowest flows and required less time to implement. Often, headwater streams were at or below the depth threshold where ADV measurements could even be attempted and transects were complicated by coarse bed material and cobbles. We discuss the methodological benefits and limitations of salt dilution by slug injection and conclude that the method could facilitate a proliferation of streamflow observation across headwater stream networks that are highly undersampled compared to larger streams.

Virginia↗
USGS2025

Estimating the probability of export restrictions to inform mineral criticality

As demand for advanced technologies rises, mineral commodities will increase in geopolitical importance. To assess risks associated with mineral commodity supply chain disruptions, governmental agencies and others have developed "criticality" assessments, with criticality described using the economic impact and probability of supply chain disruptions. In previous work, subjective supply risk indicators were developed to approximate this probability, typically combining several factors such as supply diversity and political stability of trading partners, where indicator weightings can substantially impact results. This work explicitly quantifies trade barrier probability using an ensemble of several machine learning classifiers, with probability estimates informed by exogenous variables such as prior trade barrier implementation and global export dominance. Major differences in the high-probability countries and commodities are observed across models, but the ensemble method highlights Indonesia, China, Tanzania, and the United States as particularly high risk. This approach enables a direct, quantitative, objective approach to assessing trade barrier probability, enhancing risk identification and prioritization for policymakers.

SSRN↗
USGS2025

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗