USGS Science⌕ Search

SEARCH · USGS Science

Results for “Special Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

148 records · Page 7Linked to original sources
USGS2026

Distributed volcanic fields—Patterns, products, processes, and plumbing

Distributed volcanic fields—also referred to as “monogenetic fields” or simply “volcanic fields”—are found on every continent, on the seafloors, and in every tectonic setting on Earth. Yet, our understanding of what constitutes a distributed volcanic field, and our knowledge of the common products, spatiotemporal patterns in activity, and plumbing systems of these fields, are commonly poor and (or) debated. Here we provide an overview of the current understanding of distributed volcanic fields (DVFs) through review and compilation of published data, with an emphasis on understanding the characteristics of fields that are essential to prepare for future hazardous volcanic activity. Distributed fields can erupt restricted to variable magma compositions. Activity in these fields produces nearly all types of volcanoes, including scoria and spatter cones, maars, low shields, lava fields, stratovolcanoes, and calderas, but monogenetic volcanoes are the defining characteristic of DVFs. The number of vents and lifespans of DVFs vary greatly; vent numbers range from 2 to greater than 1,000, and fields can remain active for 150,000 to 10 million years. Some characteristics of DVFs appear field dependent. Although the volumes of single monogenetic eruptions within DVFs globally are variable (from less than 0.1 to a few cubic kilometers), each field may have a characteristic range in eruption volumes. Eruptions within distributed volcanic fields can have a random distribution and timing, but spatial and (or) temporal vent clustering and alignment are common, and eruptions may be time or volume predictable. Average eruption recurrence intervals in DVFs span over an order of magnitude, from less than 3 to greater than 100 thousand years. Exposures of the shallow portions of older systems reveal that many magma batches end their ascent before reaching the surface, with some dikes stopping within only meters of the surface. Petrologic insights into the deeper plumbing systems of DVF volcanoes indicate variable depths of magma crystallization and (or) stalling, and that magma transport and storage systems may be unique to a particular DVF and its underlying crustal structure. Both seismic and petrologic data for mafic DVF eruptions corroborate intrusions of magma into storage systems in the months to years before eruption, as well as variable ascent rates through the crust (days to weeks). Few distributed fields are closely monitored, as they erupt infrequently, but these observations imply that the amount of time available to install monitoring instrumentation after the first felt seismicity may be short, as precursory activity is frequently on the order of days to months for modern DVF eruptions. Satellite-based geodesy may provide useful warning in such cases. This chapter concludes with outstanding questions and areas for future research that will aid in our understanding and preparedness for future DVF eruptions.

Professional Paper↗
USGS2026

Determining Volcanic Risk in Auckland (DEVORA) Research Programme—A transdisciplinary approach to address the challenge of distributed volcanism in an urban environment

The Determining Volcanic Risk in Auckland (DEVORA) Research Programme was launched in 2008 to address the challenges associated with monogenetic volcanism in an urban setting and to enhance volcanic risk management in Tāmaki Makaurau Auckland in Aotearoa New Zealand. It is a multi-agency, increasingly transdisciplinary (defined here as research that transcends traditional disciplinary boundaries by integrating diverse types of knowledge, perspectives, and methods from academic and non-academic participants to create novel solutions to complex problems), and collaborative research program jointly led by Waipapa Taumata Rau University of Auckland and Earth Sciences New Zealand (ESNZ; formerly GNS Science), with core funding from Natural Hazards Commission Toka Tū Ake (NHC; formerly the Earthquake Commission, EQC) and Te Kaunihera o Tāmaki Makaurau Auckland Council (AC). The primary research focus of DEVORA is to investigate the geologic history, volcanic hazards, and risk posed by the basaltic intraplate Auckland Volcanic Field. Disruption from ash fall and gas from other Aotearoa New Zealand volcanoes is also considered. DEVORA’s work to explore exposure and vulnerability in Tāmaki Makaurau Auckland is also useful for assessing risks from other non-volcanic natural hazards, such as seismic and tsunami hazards. The greater Tāmaki Makaurau Auckland region has an ethnically and socio-economically diverse population of approximately 1.7 million, representing about one-third of the Aotearoa New Zealand population, and hosts critical infrastructure of national significance. The size and nature of the populace, consequential economic base, and important infrastructure within Tāmaki Makaurau Auckland mean that the effects of a volcanic eruption would be felt nationally, including through the disruption of air travel to Aotearoa New Zealand. The hazards from such an eruption could potentially affect hundreds of thousands of people, businesses, and lifelines (critical infrastructure). A considerable challenge for emergency and risk managers is the monogenetic nature of the volcanic field. It is not known where or when the next eruption will occur, how much warning we may get before an eruption, nor how an eruption and its effects might unfold. In this contribution, we highlight the concept and collaborative intent of the DEVORA Programme and show how it has evolved over the 16 years since its inception. We describe how DEVORA has unified more than 100 researchers (including more than 50 graduate students) and numerous stakeholders to address key issues facing Tāmaki Makaurau Auckland and describe how research findings are being implemented into policy and communicated to stakeholder agencies and the public. We also illustrate the broader influence of the DEVORA Programme and provide some learnings that might benefit others embarking on similar integrated projects, especially those focused on distributed volcanism in and near populated areas.

Auckland↗
USGS2026

Conventional hydrothermal power-producing systems of the Great Basin, USA

As part of the update to the electric-grade conventional hydrothermal assessment of the Great Basin, USA, Monte Carlo analyses of identified resources within explored regions will be performed to make estimates of discovered resources and associated uncertainty. Analyses use conditional statistics where estimates are conditioned upon a hydrothermal favorability map, allowing for the likelihood that more resources exist in regions of higher hydrothermal favorability. For these analyses, a dataset of identified hydrothermal systems is compiled, and the new compilation is described herein. Recognizing that a single hydrothermal system may be developed with multiple power plants, and that the hydrothermal upflow zone may be several kilometers across with many measurements characterizing a single hydrothermal system, a procedure was developed and employed to create clusters of points (power plants, measurements, etc.) that are associated with a single system, and a new central point was defined as the best estimator of the center of the hydrothermal system. Hydrothermal systems were uniquely identified by grouping electric-grade hydrothermal measurements and operating power plants within a distance of 10 km. Groups that are >10 km apart are assumed to be different electric-grade hydrothermal systems. While 10 km was used as the threshold, most systems were significantly further apart, and most points within groups were typically within 5 km of each other. A well measurement was considered an electric-grade measurement of a hydrothermal system if it had two properties: a measured temperature of >85 °C and evidence of hydrothermal convection. Other points that were added to the dataset are locations of operating powerplants or locations that have been classified as an electric-grade hydrothermal resource by either the U.S Geological Survey (USGS) or the Great Basin Center for Geothermal Energy. After all points are assigned to systems, new points were computed with the goal of identifying the center of the throat of the hydrothermal upflow zone. If operating powerplants exist for a system, then the arithmetic average of all power plant locations is used. Otherwise, if USGS made an estimate, that location is used. In the absence of both powerplants or USGS estimates, the arithmetic average of all electric-grade measurement locations is used. An example is shown of how these newly compiled locations might be ranked for uncertainty analyses, where higher confidence is assumed if measured temperature is higher and there are many supporting measurements indicating an electric-grade resource. In summary, 28 systems have operating power plants, an additional 78 systems are known identified electric-grade hydrothermal resources, and 99 new systems were identified as probable electric-grade systems with varying levels of confidence. These 205 locations are shown as a function of a recent hydrothermal favorability map, conceptually illustrating the conditional statistics that can be used to make estimates of the undiscovered resources of the Great Basin. An accompanying data release provides summaries of developed capacity by system and USGS estimates of likely total capacity and associated uncertainty.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2024

Effective site coefficients for the 2024 International Building Code (IBC)

The U.S. National Seismic Hazard Models (NSHMs), developed by the U.S. Geological Survey (USGS), have long been the scientific foundation of seismic design guidelines and have been used to compute design ground motions for construction of new buildings and retrofit of existing buildings in the United States and its territories. The 2018 NSHM is adopted by the 2024 International Building Code (IBC). Prior to the 2018 NSHM update, hazard calculations were required only at one reference site condition defined by V S30 =760 m/s (where V S30 is the time-averaged shear wave velocity from the surface to a depth of 30 m) and three periods (peak ground acceleration, PGA, and pseudo spectral accelerations at periods of 0.2 and 1 s, S s and S 1 ). Site coefficients, F PGA , F a , and F v , were then defined by the Building Seismic Safety Council (BSSC) Provisions Update Committee (PUC) in the site-specific procedures of National Earthquake Hazard Reduction Program (NEHRP) Recommended Seismic Provisions to calculate ground motions for other site classes with different V S30 values at the given periods. The design ground motions at other periods were then estimated using a generic spectral shape that was also defined by the BSSC PUC in NEHRP provisions. In recent years, the engineering community has realized there were deficiencies with the F a and F v site coefficients and the generic spectral shape. To avoid potentially dangerous underestimations of design ground motions for long period structures on soft site conditions in high seismicity regions, the BSSC PUC recommended the use of multi-period response spectra (MPRS) in 2017. As a result, the USGS produced multi-period and multi-V S30 response spectral values in the 2018 NSHM for calculations of design ground motions and the site coefficients F a and F v were eliminated from the 2020 NEHRP Provisions. As these site coefficients were widely used inside and outside of the United States, in this study we back-calculate the “effective” site coefficients F a,eff , and F v,eff by comparing MPRS for various site classes with the MPRS for the reference site condition, and discuss the changes that are observed in the 2024 IBC compared to its previous version in 2021. The effective site coefficients are presented for test site locations and their dependence on various factors including period, ground motion intensity, and regional models are discussed. Ratio maps between the new effective site coefficients and the old ones are then presented for soft site classes and for short and long periods. For soft site classes at short periods, the new effective site coefficients are lower than the old site coefficients for high seismicity regions and higher for low seismicity regions. As it was expected, for soft site classes at long periods and high seismicity regions, the new effective site coefficients are much larger than the old site coefficients without imposing the 50% increase as a penalty that was suggested in the 2021 IBC, whereas they could be much smaller if the 50% increase would have been imposed particularly around New Madrid and Charleston high seismicity regions. For low seismicity regions, the long period effective site coefficients can be smaller or larger by 20% compared to the 2021 IBC coefficients.

Conference Paper↗
USGS2025

Pre-eruptive characteristics of “suspect” silicic magmas in Carlin-type Au-forming systems

World-class Carlin-type Au deposits hosted in sedimentary rock were formed when profuse Eocene silicic magmatism swept across northern Nevada in response to arc migration. Carlin-type Au deposits formed along with porphyry/skarn Cu-Mo-W-Au deposits, epithermal Ag-Au deposits, and distal disseminated Ag-Au deposits. But unlike these other Au-bearing deposits that have clear associations with igneous intrusions, Carlin-type ore deposits appear to have formed distant from concealed plutons, and their origin remains controversial. Despite decades of abundant geophysical, geochronological, and geochemical studies suggesting the involvement of magmas, concrete evidence for magmatic involvement is still lacking. Consequently, the involvement of contemporaneous igneous systems remains inferred based on age, proximity, and variable isotopic, geochemical, and geophysical clues. A recent synthesis of deposit models postulates that Carlin-type Au deposits are intrusion-related, but that the causative magmas reside deeper (∼6–12 km) than in typical porphyry and peripheral systems (∼3–5 km), meaning that Carlin-type deposits are perhaps more distal expressions of igneous intrusions. We investigate a collection of “suspect” magmatic systems over a ∼7 m.y. timespan (∼41–34 Ma) that are contemporaneous with and near known Carlin-type ore deposits. We report results of a multifaceted array of in situ geochemical analyses (FTIR, EMP, SHRIMP-RG, LA-ICP-MS) of quartz-hosted melt inclusions, biotite, and quartz to better characterize the pre-eruptive characteristics of these magmas. We also report results of thermobarometry and thermodynamic phase equilibria modeling to help place constraints on magmatic reservoir depths and processes. Rather than a single “flavor” of silicic magma, we observe a surprisingly broad compositional spectrum of rhyolites, with one end of the spectrum exhibiting more arc-like (I-type) characteristics and the other end displaying more post-subduction, thick-crust extensional (A-type) characteristics. This broad compositional spectrum suggests a more complex picture of silicic crustal magmatism operating over a narrow span of time during slab rollback. Despite this spectrum, magmatic systems in this study are consistently ferroan and generally peraluminous, which we interpret as an expression of the relatively elevated geotherm at the time and incorporation of variable amounts of highly peraluminous metasedimentary crustal components. The silicic magma spectrum encompasses a range of mineralization associations, including subduction-related Cu-Mo-W-Au-Ag and post-subduction, thick-crust extensional rare-metal Mo-Sn-W-F-Be-Ag-Au, consistent with the prolific and diverse array of ore deposits that formed during this time. Carlin-type Au deposition appears to be associated with nearly the entire magmatic spectrum. This apparent indifference to silicic magma “flavor” would seem to imply that if magmas are involved in Carlin-type Au deposit genesis, they perhaps do not need to be compositionally specialized and/or possibly are only relevant as heat sources driving circulation to remobilize and redistribute metals.

Nevada↗
USGS2026

Evaluation of stream capture related to groundwater pumping, middle Humboldt River Basin, Nevada

Historical, future, and potential stream capture from groundwater pumping in the middle Humboldt River Basin (MHRB), Nevada, is estimated using a calibrated numerical groundwater flow model. The model was developed to estimate (1) stream capture, which is the change in flux between the groundwater system and the Humboldt River and tributaries, and (2) change in streamflow, which is the change in streamflow estimated for the Imlay gage on the Humboldt River (U.S. Geological Survey streamgage 10333000). Historical stream capture for water years (WYs) 1961–2015 is estimated using recorded and estimated groundwater pumping during that period. Future (predictive) stream capture was based on historical stresses (WYs 1961–2015) using a scenario that simulated non-mine pumping from WY 2015 at a uniform rate for 100 years into the future. Potential stream capture throughout the middle Humboldt River Basin from groundwater pumping during varying durations of time are presented in a series of capture maps. Maps also are presented that show the potential to capture from groundwater evapotranspiration, as well as the storage changes for pumping duration of 100 years. Estimates of historical stream capture from the mainstem Humboldt River during the early 1960s are less than 400 acre-feet per year (acre-ft/yr) when groundwater withdrawals and pumping rates were relatively small compared to more recent times. In the late 1980s and early 1990s, groundwater withdrawals increased and estimated historical stream capture also increased from about 4,000 acre-ft/yr in the late 1980s and early 1990s to as much as 18,800 acre-feet (acre-ft) in WY 1998. In WY 2015, estimated historical stream capture declined to about 13,000 acre-ft because of decreasing groundwater withdrawals and lower streamflow during the drought of WYs 2012–15, resulting in less stream water available for capture. Stream capture was estimated for 100 years into the future based on WY 2015 non-mine pumping rates and mine-dewatering activity through WY 2015. Stream capture is forecast to increase to about 23,000 acre-ft/yr, and streamflow in the Humboldt River could decrease by as much as 19,000 acre-ft/yr. Pumping for mine-dewatering and the associated discharge of that water affects streamflow in the Humboldt River at Imlay, Nevada (U.S. Geological Survey streamgage 10333000). Historically, from WYs 1991 to 2015, streamflow was greater at Imlay gage during active mine-dewatering from mine-water discharge operations and increased by as much as 105,000 acre-ft in WY 1998. The increase was attributed mostly to the discharge of groundwater from mine-related dewatering operations directly into the mainstem Humboldt River or its tributaries, with some of this increase associated with return flows from discharge to rapid infiltration basins. Results indicate that streamflow at Imlay gage is expected to decrease by as much as 1,600 acre-ft/yr 30 years after mine-related pumping and discharge are discontinued. The streamflow reductions at the Imlay gage are expected to then decrease to around 500 acre-ft/yr, 100 years after mine-related pumping and discharge are discontinued. Potential capture maps were produced for pumping durations of 10, 25, 50, and 100 years. Capture map results indicate that areas of greater potential stream capture occur adjacent to the Humboldt River and for upstream tributaries areas north of the Humboldt River.

Nevada↗
USGS2025

Geochemistry and Soils of the Big Smoky Valley Fens, Nevada

Fens are groundwater-fed wetlands that can provide habitat for plants and animals. Due to anthropogenic activities and climate change, many fens around the world are at risk. This paper presents the results of a study of the hydrology and geochemistry of fens in Big Smoky Valley, central Nevada to support the Bureau of Land Management’s activities in the area. A water sample from the largest fen in the study area was analyzed for its water chemistry and compared to a nearby alluvial aquifer and hot spring. The high SiO 2 concentration of the fen sample implies that the fen water may originate from geothermal water. A soil core was taken to analyze radiocarbon age and soil type. A majority of the core was composed of silt and clay interlayered with water-filled voids. Changes in the character of the clay with depth suggest that there may have been changes in the depositional environment over time. Radiocarbon dating of Ruppia seeds showed longevity of the fen, with the minimum 14 C age of the core as 4,375±40 years. This paper provides reconnaissance-level information on the Big Smoky Valley fens, but further information would be needed to better understand the source of water to the fens or how the fen environment has changed over time with climate.

Nevada↗
USGS1999

Comparison of two approaches for determining ground-water discharge and pumpage in the lower Arkansas River Basin, Colorado, 1997-98

In March 1994, the Colorado Division of Water Resources (CDWR) adopted “Rules Governing the Measurement of Tributary Ground Water Diversions Located in the Arkansas River Basin” (Office of the State Engineer, 1994); these initial rules were amended in February 1996 (Office of the State Engineer, 1996). The amended rules require users of wells that divert tributary ground water to annually report the water pumped monthly by each well. The rules allow a well owner to report the pumpage measured by a totalizing flowmeter (TFM) or pumpage determined from electrical power data and a power conversion coefficient (PCC) (Hurr and Litke, 1989). Opinions by representatives of the State of Kansas, presented before the Special Master hearing a court case [State of Kansas v. State of Colorado, No. 105 Original (1996)] concerning post-Compact well pumping, stated that the PCC approach does not provide the same level of accuracy and reliability as a TFM when used to determine pumpage. In 1997, the U.S. Geological Survey (USGS), in cooperation with the CDWR, began a 2-year study to compare ground-water pumpage estimates made using the TFM and the PCC approaches. The study area was along the Arkansas River between Pueblo, Colorado, and the Colorado-Kansas State line (fig. 1). The two approaches for estimating ground-water discharge and pumpage were compared for more than 100 wells completed in the alluvial aquifer of the Arkansas River Basin. The TFM approach uses an inline flowmeter to directly measure instantaneous discharge and the total volume of water pumped at a well. The PCC approach uses electrical power consumption records and a power conversion coefficient to estimate the pumpage at ground-water wells. This executive summary describes the results of the comparison of the two approaches. Specifically, (1) the differences in instantaneous discharge measured with three portable flowmeters and measured with an inline TFM are evaluated, and the statistical differences in paired instantaneous discharge between the two approaches are determined; (2) short- and long-term variations in the PCC’s are presented; (3) differences in pumpage between the two approaches are evaluated, and the statistical differences in pumpage between the two approaches are determined; (4) potential sources of discrepancy between pumpage estimates are discussed; and (5) differences in total network pumpage using the two approaches are presented. During the irrigation seasons of 1997 and 1998, instantaneous discharge and electrical power demand were measured at randomly selected wells to determine PCC’s. At more than 100 wells, the PCC’s determined during the 1998 season were applied to total electrical power consumption data that was recorded between the initial and final readings at each network well site in 1998 to estimate total ground-water pumpage. At each site, an inline TFM was installed in a full-flowing, acceptable test section of pipe on the discharge side of the pump where the measurement of discharge was made. Measurements of instantaneous ground-water discharge also were made using three different types of portable flowmeters. The average velocity multiplied by the cross-sectional area of the discharge pipe was used to compute the discharge in gallons per minute. Whenever possible, discharge measurements were made at each network site using all three types of portable flowmeters.

Colorado↗
USGS2026

Coastal barrier resilience and resistance: Analysis and metrics for characterizing coastal state

Barrier islands are shaped by a variety of short- and long-term environmental processes such as storms and relative sea-level rise. These islands, found along the estuarine-marine interface, provide ecosystem services including storm surge and wave attenuation, erosion protection to inland marshes, habitat for fish and wildlife, and recreation. Natural resource managers require actionable information on how barrier island resilience and resistance changes over time to understand how an island’s current state relates to past conditions and to inform restoration prioritization and implementation. The U.S. Geological Survey and The Water Institute collaborated on a study to develop indicators of resilience and resistance for barrier islands in Louisiana. Here, resilience captures island persistence on yearly to decadal time scales, and resistance captures persistence on event time scales of days to weeks. The indicators fall in two categories: Tier 1 Screening Metrics, that can be readily calculated from available data, are easily interpretable as an evaluation of barrier condition, and provide a high-level snapshot of overall barrier resilience and resistance; and Tier 2 Analysis Metrics, which are detailed metrics that required specialized analysis and interpretation and are more applicable to answering specific questions managers may have about barrier state. The research team derived Tier 1 resilience indicators from subaerial land and vegetation cover calculated from publicly available maps and products based on satellite imagery. By benchmarking the total land and vegetation extent against their respective historical maxima, this metric provides a snapshot of an island’s current state in the context of its long-term trajectory. The research team developed Tier 1 resistance indicators based on subaerial island configuration and water level recurrence as a proxy for evaluating island resistance to storms, which are the primary driver of short-term change. These Tier 1 metrics can be analyzed over time to provide a high-level assessment of how an island’s resistance decreases because of elevation loss or sea-level rise or increases due to restoration or natural recovery. The research team developed Tier 2 resilience and resistance indicators and associated analyses to provide detailed information for specific time periods or applications (e.g., wildlife management). These metrics include habitat coverage from high-resolution maps, which show composition changes over time to capture the evolving resilience of specific habitat types; high tide flooding analysis, which evaluate island area relative to specified flooding thresholds to characterize resistance in the short-term or, if analyzed over time, indicate changes in resilience; and hypsometric curve analysis, which allows managers to evaluate island area changes above their own elevation benchmarks of interest and similarly characterize resistance in the short-term or indicate changes in resilience if assessed over time. The research team calculated Tier 1 metrics of the barrier islands and headlands along the coast of Louisiana for the period of 1984 through 2021 and Tier 2 metrics for select times during that period depending on data available and quality. The results were captured in a report card for each barrier, which also includes an overview of the metrics and their interpretation; a restoration and storm history; and Tier 1 and Tier 2 metric analysis, including benchmarking against coastwide and regional values as well as to an island’s pre-restoration trajectory. These report cards provide a readily digestible synthesis of barrier condition and trajectory that coastal managers can use to support restoration prioritization and other decisions.

Louisiana↗
USGS2025

A scientific vision and roadmap for earthquake rupture forecast developments, a USGS perspective

We articulate a scientific vision and roadmap for the development of improved Earthquake Rupture Forecast models, which are one of the two main modeling components used in modern seismic hazard and risk analysis. One primary future objective is to provide fully time-dependent models that include both elastic rebound and spatiotemporal clustering nationwide, which is particularly important for shorter-term hazard and risk considerations (e.g., earthquake insurance products). We also discuss the importance and perennial challenges associated with quantifying epistemic uncertainties, including those associated with deformation-model slip rates, un-quantified sampling errors with respect to off-fault seismicity, and any spatial covariances. The need for more physics-based approaches is also emphasized, as is the benefit of adding model valuation (quantifying usefulness) to our verification and validation protocols. Given the multidisciplinary and system-level nature of this activity, modular design is critical. Future updates will also draw from best-available science by both the United States Geological Survey and the external community. The primary goal of this paper is to highlight plans that guide research and facilitate community engagement with model development, especially with respect to lowering the entry barrier for early career scientists and engineers. The paper is written so readers can focus on the sections that interest them most (see table of contents), with the Introduction and Discussion providing a stand-alone overview and summary.

Bulletin of the Seismological Society of America↗
USGS2024

New U-Pb geochronology and geochemistry of Paleozoic metaigneous rocks from western Yukon and eastern Alaska, cross-border synthesis, and implications for tectonic models

The tectonic evolution of and relation between the Yukon-Tanana terrane and the Lake George assemblage, as well as other associated tectonic assemblages in western Yukon and eastern Alaska, have been debated for decades. The Yukon-Tanana terrane is widely considered to be an allochthonous rifted fragment derived from the Laurentian continental margin, whereas the Lake George assemblage and associated assemblages are currently interpreted to be part of the parautochthonous continental margin of western North America (Laurentia). To address these topics, we present 40 new U-Pb zircon ages and 20 new whole-rock geochemical analyses. We incorporate these data into a new compilation of available geological mapping for a large area that straddles the Alaska-Yukon border, together with 34 previously published U-Pb age determinations and an extensive geochemical database of metaigneous rocks from Late Devonian to Early Mississippian and middle to late Permian assemblages in this area. Magmatism in the Lake George assemblage and related assemblages occurred in two pulses from about 371 to 360 and from about 358 to 347 million years ago (Ma); geochemical discrimination diagrams indicate a large crustal component, possibly indicative of arc magmatism, for felsic metaigneous rocks and a range of tectonic environments for mafic rocks. Magmatism in the Fortymile River and related assemblages, and parts of the Nasina assemblage—all parts of the Yukon-Tanana terrane—are mainly Early Mississippian and span a crystallization age range from about 361 to 343 Ma; geochemical discrimination diagrams for these rocks indicate primarily arc geochemical signatures for both mafic and felsic rocks. Middle to late Permian crystallization ages (about 261–253 Ma) are indicated for felsic metaigneous rocks in the Klondike assemblage and some of the felsic metaigneous rocks in the Nasina assemblage. Based on our mapping, we propose the existence of a possible unconformity between the Mississippian and Permian felsic metavolcanic rocks within the Nasina assemblage that is marked by sporadic occurrences of stretched-pebble conglomerate. Our combined database supports the well-established model of a magmatic arc comprising the Fortymile River and Finlayson assemblages of the rifted Yukon-Tanana terrane continental fragment on which a middle to late Permian arc (Klondike assemblage) was later built. The assemblages of the Yukon-Tanana terrane were subsequently intruded by Late Triassic to Early Jurassic granitoids, presumably during reaccretion of the Yukon-Tanana terrane to the continental margin. Permian and Late Triassic to Early Jurassic intrusions have not been mapped in the now structurally lower plate Lake George assemblage; their absence is one of the lines of evidence that have been used to support the parautochthonous, rather than allochthonous, origin of the Lake George assemblage and related assemblages. Our new data, together with previously published ranges of igneous crystallization ages and geochemical tectonic signatures of the Late Devonian to Early Mississippian magmatic rocks in the Lake George assemblage and associated assemblages and in the Fortymile River, Nasina, and correlated assemblages of the Yukon-Tanana terrane, indicate that the currently accepted interpretation of the Lake George assemblage and associated rocks being part of parauthochthonous North America is not the only possible interpretation of this tectonic entity. Approximately half of the dated intrusive rocks in the Lake George assemblage are contemporaneous with the metaigneous rocks of the Yukon-Tanana terrane arc (<361 Ma). We speculate that our approximately 361 Ma U-Pb age for quartz syenite in part of the North American continental margin in south-central Yukon defines the beginning of rifting of the Laurentian margin. Although the currently favored model of prolonged middle Paleozoic subduction and extension in both the Yukon-Tanana terrane and parautochthonous North America allows for simultaneous middle Paleozoic magmatism on both sides of the Slide Mountain Ocean, we now propose an alternative hypothesis in which the Lake George assemblage represents a deeper part of the rifted Yukon-Tanana terrane arc. If this is the case, the absence of Permian and Late Triassic to Early Jurassic arc rocks in the Lake George assemblage could be explained either by the arcs of these ages not being wide enough to have affected the Lake George assemblage or by tectonic displacement of these arc rocks away from the Lake George assemblage. Our approximately 259 Ma U-Pb zircon age and geochemical analyses of metarhyolite in the Seventymile terrane in Alaska, which comprises remnants of the back-arc basin that separated the Yukon-Tanana terrane from the Laurentian continental margin, confirm the presence of a late middle Permian volcanic arc component to the terrane. Our approximately 319 Ma U-Pb zircon age from the Chicken assemblage (as redefined in this study) in eastern Alaska, combined with previously reported fossil ages and a U-Pb zircon age from this assemblage, indicate that it is a Late Mississippian to Early Pennsylvanian arc assemblage. We propose several other relatively young, locally developed arc assemblages outboard of the ancient continental margin of Laurentia that may correlate with the Chicken assemblage, but we consider its origin to remain an enigma.

Alaska↗
USGS2026

The Sedimentary Geochemistry and Paleoenvironments Project Phase 2 data release: An open data resource for the study of Earth's environmental history

Geochemical data from sedimentary rocks are the primary source of information regarding Earth's surface evolution through time, including its air and water envelopes and interactions with life and deep Earth processes. The Sedimentary Geochemistry and Paleoenvironments Project (SGP) is a scientific consortium centered around open data and community-driven development of cyberinfrastructure tools and resources for sedimentary geochemistry and Earth history. Here we describe the SGP Phase 2 data release, which focused on incorporating Paleoproterozoic and Mesoproterozoic (2500–1000 million years ago) data and better accommodating carbonate data. This data release was built through the involvement of >200 researchers worldwide in academia, government, and industry, and provides the largest available public data resource for our user community in the academic fields of geochemistry, sedimentology, tectonics, paleontology, Earth history, and paleoclimate, as well as the petroleum and minerals industries. The dataset now encompasses 126,006 samples and 4,132,371 geochemical analyses. In addition to direct entry by SGP Team Members, we have ingested and incorporated datasets from the Geoscience Australia OZCHEM database, the Alberta Geological Survey, and the Deep-Time Marine Sedimentary Element Database (DM-SED) compilation. This paper details sampling in the Phase 2 dataset with respect to age, geography, lithology, and other geological characteristics, documents access via our search website and API, discusses possible issues and/or biases in the dataset that could impact analyses, describes plans for governance and stewardship of data from Indigenous lands, and serves as the citable reference paper for the data release.

Chemical Geology↗
USGS2025

Simulation of the impacts of projected climate change on groundwater resources in the urban, semiarid Yucaipa Valley watershed, southern California using an integrated hydrologic model

Managing water resources in semiarid watersheds is challenging due to limited supply and uncertain future climate conditions. This paper examines the impact of future climate changes on an urban watershed in southern California using an integrated hydrologic model. GSFLOW modeling software is used to simulate the nonlinear relationships between climate trends and precipitation partitioning into ET, runoff, and subsurface storage. Four global circulation models (GCMs), each with two greenhouse-gas scenarios, RCP45 and RCP85 are used to project future climate conditions. GCMs include the CanESM2, CNRM-CM5, HadGEM2-ES, and MIROC5 models. The model's simulated hydrologic conditions are compared with historical data to assess changes in water budgets and groundwater supply. Results indicate decreased groundwater storage in most scenarios due to increased natural evapotranspiration, vegetation consumptive use, and streamflow out of the watershed. Only scenarios with substantially increased future precipitation show increased groundwater storage. The study also highlights increased future aridity despite the rise in precipitation and large precipitation events forecast by GCMs, which increase the risk of urban floods and decrease stream leakage and water available to vegetation.

California↗
USGS2025

The geology of Canadian potash: A critical mineral for feeding the world

Potash, potassium-bearing water-soluble salt, is the primary global economic source of potassium. Potash is recognized as a critical mineral in Canada as it is the largest source of potassium used in fertilizers. It is essential for global agricultural productivity and food security. Canada is the world’s largest potash exporter with vast deposits in the widely mined Prairie Evaporite of Saskatchewan, which formed in the epicontinental Elk Point Basin during the Middle Devonian. Potash is also found in the Windsor Group of Atlantic Canada where it formed in a series of tectonically active basins during the Mississippian that have undergone substantial post-depositional subsurface alteration and deformation. Potash deposits were mined in New Brunswick up until 2016. Both deposits are salt giants, recording times in the geologic record of extensive and long-lasting evaporite genesis under arid conditions in restricted seas. This paper reviews the geological and economic significance of Canadian potash, including (1) the genesis of each deposit, (2) diagenetic, erosional, and tectonic modification, and (3) exploration and mining in each basin. Underdeveloped regions, possible undiscovered resources, environmental considerations, and the importance of sustainable practices in light of climate change and socioeconomic risks are also addressed.

Facets↗
USGS2026

Opportunities for the U.S. Geological Survey’s National Seismic Hazard Model to improve seismic risk assessment of critical infrastructure.

As fragility and risk modeling techniques and computational capabilities evolve, complemented by moving toward more routine and systematic seismic risk assessment of all buildings and critical infrastructure, the authors pose a few critical questions to investigate how the U.S. Geological Survey (USGS) National Seismic Hazard Models (NSHMs) can be used and enhanced further to serve such issues. In this paper, we use three examples from multiple sectors to (1) identify the role of USGS NSHMs in evaluating seismic risks to critical infrastructure, (2) quantify potential impacts from NSHM enhancements (i.e., [i] hazard curves for the vertical component of ground motion, [ii] stochastic event sets, and [iii] maps of probabilistic ground failure hazards), and (3) clarify the feasibility of relevant NSHM improvements. We illuminate that NSHMs are commonly used in location-specific performance assessments, whereas earthquake effects on critical infrastructure can be widespread across large geospatial regions. Further, we found that without the NSHM extensions considered here, risk can be severely underestimated, e.g., neglecting ground failure hazards can underestimate regional loss by a factor of two or more. Although many challenges remain, we developed example prototypes to clarify the feasibility of the NSHM extensions, which can facilitate improved management of risks to critical infrastructure.

Earthquake Spectra Journal↗
USGS2025

Did they feel it? Legacy maroseismic data illuminates an engimatic 20th century earthquake

The challenges and the importance of preserving legacy instrumental records of earthquakes are now well-recognized (e.g., Richards & Hellweg, 2020, https://doi.org/10.1785/0220200053 ). Seismologists may not be aware of parallel challenges and opportunities with legacy macroseismic data for earthquakes in the United States. For much of the 20th century, macroseismic data were collected by a series of U.S. government agencies using a standard questionnaire distributed on postcards. Published summaries of postcards provide macroseismic data akin to modern Did You Feel It? questionnaire responses. In this paper we focus on the M 6.5 Fickle Hill, California earthquake, on 21 December 1954 (Hellweg et al., 2025) as a proof-of-concept, illustrating the potential of what we dub Did They Feel It? (DTFI) data to improve our understanding of significant 20th century U.S. earthquakes for which instrumental data are sparse. Legacy macroseismic data interpreted following modern conventions can potentially constrain traditional ShakeMaps at a level of detail and accuracy that in some respects rival maps for modern earthquakes. The updated ShakeMap for the 1954 Fickle Hill earthquake, also drawing from recently published media and first-person accounts, supports the location, depth, and stress drop value estimated from available instrumental data (Hellweg et al., 2025).

California↗
USGS2024

Integrating Sr isotopes, microchemistry, and genetics to reconstruct Salmonidae species and life history

Recent approaches to fisheries research emphasize the importance of the coproduction of knowledge in building resilient and culturally mindful fisheries management frameworks. Despite widespread recognition of the need for Indigenous knowledge and historical reference points as baseline data, archaeological data are rarely included in conservation biology research designs. Here we propose a novel multiproxy method to learn from former fisheries stewards by generating archaeological data on past salmonid population parameters. We used a newly developed, high throughput qPCR (HT-qPCR) chip, originally designed for environmental DNA (eDNA), for species identification of archaeological salmonid vertebrae. We combine this with the laser ablation split-stream (LASS) approach to identify ocean-migration versus freshwater residency. We test this multidisciplinary approach using both contemporary and archaeological salmonid samples and new radiocarbon dates from the Tronsdal Site on the Skagit River, Washington State, USA. This is a useful approach for extracting information about Salmonidae species and life history diversity from archaeological remains to reconstruct historic baselines for several population parameters in anadromous species with long periods of freshwater residency. The approach outlined in this paper may be particularly useful for research investigating past fisheries dynamics, offering hundreds to thousands of years of temporal depth for modern fisheries management, harvest policies, restoration ecology, and conservation biology.

Idaho, Oregon, Washington↗
USGS2025

Grand Canyon landslide-dam and paleolake triggered by the Meteor Crater impact at 56 ka

This paper hypothesizes that the Meteor Crater impact in Arizona, USA, 56,000 years ago triggered landslides in Grand Canyon that dammed the Colorado River and formed Nankoweap paleolake. This is compatible with shock and earthquake physics for the impact that infer a M5.4 seismic event, attenuated to an effective magnitude of M3.5 at Grand Canyon. Results that support the hypothesis include radiocarbon dating of driftwood and luminescence dating of associated slack-water lake sediments that are preserved in caves up to 60 m above the modern Colorado River. Radiocarbon ages from two locations, including Stanton’s Cave, date the driftwood as 55.25 ± 2.44 ka (n = 4). Sediments associated with the driftwood gave a luminescence age of 56.00 ± 6.39 ka (n = 2). These six Grand Canyon dates, and three published ages for the Meteor Crater impact, show statistically indistinguishable results that support the hypothesis for a geologically instantaneous series of events with a mean age of 55.60 ± 1.30 ka. This work highlights the value of radiocarbon dating near the limits of the technique, integration of multiple dating methods, and seismic and landslide hazards associated with meteorite impacts in regions of extreme topography like Grand Canyon.

Arizona↗