USGS Science⌕ Search

SEARCH · USGS Science

Results for “Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS2004

Dynamic modelling of an adsorption storage tank using a hybrid approach combining computational fluid dynamics and process simulation

A computational fluid dynamics (CFD) software package has been coupled with the dynamic process simulator of an adsorption storage tank for methane fuelled vehicles. The two solvers run as independent processes and handle non-overlapping portions of the computational domain. The codes exchange data on the boundary interface of the two domains to ensure continuity of the solution and of its gradient. A software interface was developed to dynamically suspend and activate each process as necessary, and be responsible for data exchange and process synchronization. This hybrid computational tool has been successfully employed to accurately simulate the discharge of a new tank design and evaluate its performance. The case study presented here shows that CFD and process simulation are highly complementary computational tools, and that there are clear benefits to be gained from a close integration of the two. ?? 2004 Elsevier Ltd. All rights reserved.

Computers and Chemical Engineering↗
USGS2011

Modeling of hydroecological feedbacks predicts distinct classes of landscape pattern, process, and restoration potential in shallow aquatic ecosystems

It is widely recognized that interactions between vegetation and flow cause the emergence of channel patterns that are distinct from the standard Schumm classification of river channels. Although landscape pattern is known to be linked to ecosystem services such as habitat provision, pollutant removal, and sustaining biodiversity, the mechanisms responsible for the development and stability of different landscape patterns in shallow, vegetated flows have remained poorly understood. Fortunately, recent advances have made possible large-scale models of flow through vegetated environments that can be run over a range of environmental variables and over timescales of millennia. We describe a new, quasi-3D cellular automata model that couples simulations of shallow-water flow, bed shear stresses, sediment transport, and vegetation dynamics in an efficient manner. That efficiency allowed us to apply the model widely in order to determine how different hydroecological feedbacks control landscape pattern and process in various types of wetlands and floodplains. Distinct classes of landscape pattern were uniquely associated with specific types of allogenic and autogenic drivers in wetland flows. Regular, anisotropically patterned wetlands were dominated by allogenic processes (i.e., processes driven by periodic high water levels and flow velocities that redistribute sediment), relative to autogenic processes (e.g., vegetation production, peat accretion, and gravitational erosion). These anistropically patterned wetlands are therefore particularly prone to hydrologic disturbance. Other classes of wetlands that emerged from simulated interactions included maze-patterned, amorphous, and topographically noisy marshes, open marsh with islands, banded string-pool sequences perpendicular to flow, parallel deep and narrow channels flanked by marsh, and ridge-and-slough patterned marsh oriented parallel to flow. Because vegetation both affects and responds to the balance between the transport capacity of the flow and sediment supply, these vegetated systems exhibit a feedback that is not dominant in most rivers. Consequently, unlike in most rivers, it is not possible to predict the “channel pattern” of a vegetated landscape based only on discharge characteristics and sediment supply; the antecedent vegetation pattern and vegetation dynamics must also be known. In general, the stability of different wetland pattern types is most strongly related to factors controlling the erosion and deposition of sediment at vegetation patch edges, the magnitude of sediment redistribution by flow, patch elevation relative to water level, and the variability of erosion rates in vegetation patches with low flow-resistance. As we exemplify in our case-study of the Everglades ridge and slough landscape, feedback between flow and vegetation also causes hysteresis in landscape evolution trajectories that will affect the potential for landscape restoration. Namely, even if the hydrologic conditions that historically produced higher flows are restored, degraded portions of the ridge and slough landscape are unlikely to revert to their former patterning. As wetlands and floodplains worldwide become increasingly threatened by climate change and urbanization, the greater mechanistic understanding of landscape pattern and process that our analysis provides will improve our ability to forecast and manage the behavior of these ecosystems.

Florida↗
USGS2014

Characterizing the primary material sources and dominant erosional processes for post-fire debris-flow initiation in a headwater basin using multi-temporal terrestrial laser scanning data

Wildfire dramatically alters the hydrologic response of a watershed such that even modest rainstorms can produce hazardous debris flows. Relative to shallow landslides, the primary sources of material and dominant erosional processes that contribute to post-fire debris-flow initiation are poorly constrained. Improving our understanding of how and where material is eroded from a watershed during a post-fire debris-flow requires (1) precise measurements of topographic change to calculate volumetric measurements of erosion and deposition, and (2) the identification of relevant morphometrically defined process domains to spatially constrain these measurements of erosion and deposition. In this study, we combine the morphometric analysis of a steep, small (0.01 km 2 ) headwater drainage basin with measurements of topographic change using high-resolution (2.5 cm) multi-temporal terrestrial laser scanning data made before and after a post-fire debris flow. The results of the morphometric analysis are used to define four process domains: hillslope-divergent, hillslope-convergent, transitional, and channelized incision. We determine that hillslope-divergent and hillslope-convergent process domains represent the primary sources of material over the period of analysis in the study basin. From these results we conclude that raindrop-impact induced erosion, ravel, surface wash, and rilling are the primary erosional processes contributing to post-fire debris-flow initiation in the small, steep headwater basin. Further work is needed to determine (1) how these results vary with increasing drainage basin size, (2) how these data might scale upward for use with coarser resolution measurements of topography, and (3) how these results change with evolving sediment supply conditions and vegetation recovery.

California↗
USGS2021

Uncovering process domains in large rivers: Patterns and potential drivers of benthic substrate heterogeneity in two North American riverscapes

Identifying and understanding functional process domains (sensu Montgomery, 1999) in rivers is paramount for linking the physical habitat template to ecosystem structure and function. To date, efforts to do this have been rare, especially in large rivers, as they require appropriate tools for quantifying habitat heterogeneity with fine-scale resolution across broad spatial extents. In this study, we used side-scan sonar technology to map riverbed substrate at six sites in the Yellowstone and Missouri rivers. Substrate maps were then analyzed and visualized using geospatial analysis to relate fine-grained spatial substrate patterns to process domain structure. Our findings revealed two distinct nested domains of substrate patchiness, suggesting that different factors are responsible for shaping patterns of substrate at different scales. Although small-scale patchiness in substrate was likely driven by internal, or autogenic, physical processes, patterns at larger segment extents (>3 km) were often driven by abrupt transitions in habitat related to exogenous factors such as lateral erosion of talus, tributary inputs, and bank armoring. Additionally, we found that heterogeneity in benthic substrate increased with spatial extent at all of our study sites; however, this relationship was lower in the Missouri River, which is altered by impoundment. Our study represents one of the first efforts to relate benthic habitat heterogeneity to nested process domain structure in large riverscapes, and offers a unique perspective for linking landscape processes, geomorphological habitat heterogeneity, and biological structure and function in large rivers.

Montana, North Dakota↗
USGS2010

Distribution and interplay of geologic processes on Titan from Cassini radar data

The Cassini Titan Radar Mapper is providing an unprecedented view of Titan’s surface geology. Here we use Synthetic Aperture Radar (SAR) image swaths (Ta–T30) obtained from October 2004 to December 2007 to infer the geologic processes that have shaped Titan’s surface. These SAR swaths cover about 20% of the surface, at a spatial resolution ranging from ∼350 m to ∼2 km. The SAR data are distributed over a wide latitudinal and longitudinal range, enabling some conclusions to be drawn about the global distribution of processes. They reveal a geologically complex surface that has been modified by all the major geologic processes seen on Earth – volcanism, tectonism, impact cratering, and erosion and deposition by fluvial and aeolian activity. In this paper, we map geomorphological units from SAR data and analyze their areal distribution and relative ages of modification in order to infer the geologic evolution of Titan’s surface. We find that dunes and hummocky and mountainous terrains are more widespread than lakes, putative cryovolcanic features, mottled plains, and craters and crateriform structures that may be due to impact. Undifferentiated plains are the largest areal unit; their origin is uncertain. In terms of latitudinal distribution, dunes and hummocky and mountainous terrains are located mostly at low latitudes (less than 30°), with no dunes being present above 60°. Channels formed by fluvial activity are present at all latitudes, but lakes are at high latitudes only. Crateriform structures that may have been formed by impact appear to be uniformly distributed with latitude, but the well-preserved impact craters are all located at low latitudes, possibly indicating that more resurfacing has occurred at higher latitudes. Cryovolcanic features are not ubiquitous, and are mostly located between 30° and 60° north. We examine temporal relationships between units wherever possible, and conclude that aeolian and fluvial/pluvial/lacustrine processes are the most recent, while tectonic processes that led to the formation of mountains and Xanadu are likely the most ancient.

Icarus↗
USGS2016

Use of structured decision-making to explicitly incorporate environmental process understanding in management of coastal restoration projects: Case study on barrier islands of the northern Gulf of Mexico

Coastal ecosystem management typically relies on subjective interpretation of scientific understanding, with limited methods for explicitly incorporating process knowledge into decisions that must meet multiple, potentially competing stakeholder objectives. Conversely, the scientific community lacks methods for identifying which advancements in system understanding would have the highest value to decision-makers. A case in point is barrier island restoration, where decision-makers lack tools to objectively use system understanding to determine how to optimally use limited contingency funds when project construction in this dynamic environment does not proceed as expected. In this study, collaborative structured decision-making (SDM) was evaluated as an approach to incorporate process understanding into mid-construction decisions and to identify priority gaps in knowledge from a management perspective. The focus was a barrier island restoration project at Ship Island, Mississippi, where sand will be used to close an extensive breach that currently divides the island. SDM was used to estimate damage that may occur during construction, and guide repair decisions within the confines of limited availability of sand and funding to minimize adverse impacts to project objectives. Sand was identified as more limiting than funds, and unrepaired major breaching would negatively impact objectives. Repairing minor damage immediately was determined to be generally more cost effective (depending on the longshore extent) than risking more damage to a weakened project. Key gaps in process-understanding relative to project management were identified as the relationship of island width to breach formation; the amounts of sand lost during breaching, lowering, or narrowing of the berm; the potential for minor breaches to self-heal versus developing into a major breach; and the relationship between upstream nourishment and resiliency of the berm to storms. This application is a prototype for using structured decision-making in support of engineering projects in dynamic environments where mid-construction decisions may arise; highlights uncertainty about barrier island physical processes that limit the ability to make robust decisions; and demonstrates the potential for direct incorporation of process-based models in a formal adaptive management decision framework.

Mississippi↗
USGS2020

An international code comparison study on coupled thermal, hydrologic and geomechanical processes of natural gas hydrate-bearing sediments

Geologic reservoirs containing gas hydrate occur beneath permafrost environments and within marine continental slope sediments, representing a potentially vast natural gas source. Numerical simulators provide scientists and engineers with tools for understanding how production efficiency depends on the numerous, interdependent (coupled) processes associated with potential production strategies for these gas hydrate reservoirs. Confidence in the modeling and forecasting abilities of these gas hydrate reservoir simulators (GHRSs) grows with successful comparisons against laboratory and field test results, but such results are rare, particularly in natural settings. The hydrate community recognized another approach to building confidence in the GHRS: comparing simulation results between independently developed and executed computer codes on structured problems specifically tailored to the interdependent processes relevant for gas hydrate-bearing systems. The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL), sponsored the first international gas hydrate code comparison study, IGHCCS1, in the early 2000s. IGHCCS1 focused on coupled thermal and hydrologic processes associated with producing gas hydrates from geologic reservoirs via depressurization and thermal stimulation. Subsequently, GHRSs have advanced to model more complex production technologies and incorporate geomechanical processes into the existing framework of coupled thermal and hydrologic modeling. This paper contributes to the validation of these recent GHRS developments by providing results from a second GHRS code comparison study, IGHCCS2, also sponsored by DOE/NETL. IGHCCS2 includes participants from an international collection of universities, research institutes, industry, national laboratories, and national geologic surveys. Study participants developed a series of five benchmark problems principally involving gas hydrate processes with geomechanical components. The five problems range from simple geometries with analytical solutions to a representation of the world’s first offshore production test of methane hydrates, which was conducted with the depressurization method off the coast of Japan. To identify strengths and limitations in the various GHRSs, study participants submitted solutions for the benchmark problems and discussed differing results via teleconferences. The GHRSs evolved over the course of IGHCCS2 as researchers modified their simulators to reflect new insights, lessons learned, and suggested performance enhancements. The five benchmark problems, final sample solutions, and lessons learned that are presented here document the study outcomes and serve as a reference guide for developing and testing gas hydrate reservoir simulators.

Journal of Marine and Petroleum Geology↗
USGS2011

A working environment for digital planetary data processing and mapping using ISIS and GRASS GIS

Since the beginning of planetary exploration, mapping has been fundamental to summarize observations returned by scientific missions. Sensor-based mapping has been used to highlight specific features from the planetary surfaces by means of processing. Interpretative mapping makes use of instrumental observations to produce thematic maps that summarize observations of actual data into a specific theme. Geologic maps, for example, are thematic interpretative maps that focus on the representation of materials and processes and their relative timing. The advancements in technology of the last 30 years have allowed us to develop specialized systems where the mapping process can be made entirely in the digital domain. The spread of networked computers on a global scale allowed the rapid propagation of software and digital data such that every researcher can now access digital mapping facilities on his desktop. The efforts to maintain planetary missions data accessible to the scientific community have led to the creation of standardized digital archives that facilitate the access to different datasets by software capable of processing these data from the raw level to the map projected one. Geographic Information Systems (GIS) have been developed to optimize the storage, the analysis, and the retrieval of spatially referenced Earth based environmental geodata; since the last decade these computer programs have become popular among the planetary science community, and recent mission data start to be distributed in formats compatible with these systems. Among all the systems developed for the analysis of planetary and spatially referenced data, we have created a working environment combining two software suites that have similar characteristics in their modular design, their development history, their policy of distribution and their support system. The first, the Integrated Software for Imagers and Spectrometers (ISIS) developed by the United States Geological Survey, represents the state of the art for processing planetary remote sensing data, from the raw unprocessed state to the map projected product. The second, the Geographic Resources Analysis Support System (GRASS) is a Geographic Information System developed by an international team of developers, and one of the core projects promoted by the Open Source Geospatial Foundation (OSGeo). We have worked on enabling the combined use of these software systems throughout the set-up of a common user interface, the unification of the cartographic reference system nomenclature and the minimization of data conversion. Both software packages are distributed with free open source licenses, as well as the source code, scripts and configuration files hereafter presented. In this paper we describe our work done to merge these working environments into a common one, where the user benefits from functionalities of both systems without the need to switch or transfer data from one software suite to the other one. Thereafter we provide an example of its usage in the handling of planetary data and the crafting of a digital geologic map. ?? 2010 Elsevier Ltd. All rights reserved.

Conference Paper↗
USGS2023

Historical Structure from Motion (HSfM): Automated processing of historical aerial photographs for long-term topographic change analysis

Precisely measuring the Earth’s changing surface on decadal to centennial time scales is critical for many science and engineering applications, yet long-term records of quantitative landscape change are often temporally and geographically sparse. Archives of scanned historical aerial photographs provide an opportunity to augment these records with accurate elevation measurements that capture the historical state of the Earth surface. Structure from Motion (SfM) photogrammetry workflows produce high-quality digital elevation models (DEMs) and orthoimage mosaics from these historical images, but time-intensive tasks like manual image preprocessing (e.g., fiducial marker identification) and ground control point (GCP) selection impede processing at scale. We developed an automated method to process historical images and generate self-consistent time series of high-resolution (0.5–2 m) DEMs and orthomosaics, without manual GCP selection. The method relies on SfM to correct camera interior and exterior orientation and a robust multi-stage co-registration approach using modern reference terrain datasets for geolocation refinement. We demonstrate the method using scanned images from the North American Glacier Aerial Photography (NAGAP) archive collected between 1967 and 1997. We present results for two sites with variable photo acquisition geometry and overlap — Mount Baker and South Cascade Glacier in Washington State, USA. The automated method corrects initial camera position errors of several kilometers and produces accurately georeferenced, high-resolution DEMs and orthoimages, regardless of camera configuration, acquisition geometry, terrain characteristics, and reference DEM properties. The average RMS reprojection error following bundle adjustment optimization was 0.67 px (0.15 m) for the 261 images contributing to 10 final DEM mosaics between 1970 and 1992 at Mount Baker, and 0.65 px (0.13 m) for the 243 images contributing to 18 individual DEMs between 1967 and 1997 at South Cascade Glacier. The relative accuracy of elevation values in the historical time series stacks was 0.68 m at Mount Baker and 0.37 m at South Cascade Glacier. Our products have reduced systematic error and improved accuracy compared to DEM products generated using SfM with manual GCP selection. Final elevation change measurement precision was ∼ "> ∼ 0.7–1.0 m over a 30-year period, enabling the study of processes with rates as low as ∼ "> ∼ 1-3 cm/yr. Our results demonstrate the potential of this scalable method to rapidly process archives of historical imagery and deliver new quantitative insights on long-term geodetic change and Earth surface processes.

Washington↗
USGS2002

Processing, mosaicking and management of the Monterey Bay digital sidescan-sonar images

Sidescan-sonar imaging systems with digital capabilities have now been available for approximately 20 years. In this paper we present several of the various digital image processing techniques developed by the U.S. Geological Survey (USGS) and used to apply intensity/radiometric and geometric corrections, as well as enhance and digitally mosaic, sidescan-sonar images of the Monterey Bay region. New software run by a WWW server was designed and implemented to allow very large image data sets, such as the digital mosaic, to be easily viewed interactively, including the ability to roam throughout the digital mosaic at the web site in either compressed or full 1-m resolution. The processing is separated into the two different stages: preprocessing and information extraction. In the preprocessing stage, sensor-specific algorithms are applied to correct for both geometric and intensity/radiometric distortions introduced by the sensor. This is followed by digital mosaicking of the track-line strips into quadrangle format which can be used as input to either visual or digital image analysis and interpretation. An automatic seam removal procedure was used in combination with an interactive digital feathering/stenciling procedure to help minimize tone or seam matching problems between image strips from adjacent track-lines. The sidescan-sonar image processing package is part of the USGS Mini Image Processing System (MIPS) and has been designed to process data collected by any 'generic' digital sidescan-sonar imaging system. The USGS MIPS software, developed over the last 20 years as a public domain package, is available on the WWW at: http://terraweb.wr.usgs.gov/trs/software.html.

Marine Geology↗
USGS2008

Uncertainty and sensitivity issues in process-based models of carbon and nitrogen cycles in terrestrial ecosystems

Many process-based models of carbon (C) and nitrogen (N) cycles have been developed for northern forest ecosystems. These models are widely used to evaluate the long-term decisions in forest management dealing with effects like particulate pollution, productivity and climate change. Regarding climate change, one of the key questions that have sensitive political implications is whether northern forests will sequester atmospheric C or not. Whilst many process-based models have been tested for accuracy by evaluating or validating against observed data, few have dealt with the complexity of the incorporated procedures to estimate uncertainties associated with model predictions or the sensitivity of these predictions to input factors in a systematic, inter-model comparison fashion. In general, models differ in their underlying attempts to match natural complexities with assumed or imposed model structure and process formulations to estimate model parameters, to gather data and to address issues on scope, scale and natural variations. Uncertainties may originate from model structure, estimation of model parameters, data input, representation of natural variation and scaling exercises. Model structure relates to the mathematical representation of the processes modelled and the type of state variables that a model contains. The modelling of partitioning among above- and below-ground C and N pools and the interdependence among these pools remain a major source of uncertainty in model structure and error propagation. For example, most soil C models use at least three state variables to represent the different types of soil organic matter (SOM). This approach results in creating three artificial SOM pools, assuming that each one contains C compounds with the same turnover rate. In reality, SOM consists of many different types of C compounds with widely different turnover rates. Uncertainty in data and parameter estimates are closely linked. Data uncertainties are associated with high variations in estimating forest biomass, productivity and soil organic matter and their estimates may be incomplete for model initialisation, calibration, validation and sensitivity analysis of generalised predictor models. The scale at which a model is being used also affects the level of uncertainty, as the errors in the prediction of the C and N dynamics differ from site to landscape levels and across climatic regions. If the spatial or temporal scale of a model application is changed, additional uncertainty arises from neglecting natural variability in system variables in time and space. Uncertainty issues are also intimately related to model validation and sensitivity analysis. The estimation of uncertainties is needed to inform decision processes in order to detect the possible corridor of development. Uncertainty in this context is an essential measure of quality for stakeholder and decision makers.

Book chapter↗
USGS2011

Process-based modeling of tsunami inundation and sediment transport

The infrequent and unpredictable nature of tsunamis precludes the use of field experiments to measure the hydrodynamic and sediment transport processes that occur. Instead, these processes are often approximated from laboratory, numerical, and theoretical studies or inferred from observations of the resultant sediment deposits. Here Delft3D, a three-dimensional numerical model, is used to simulate the inundation and sediment transport of a tsunami similar in magnitude to the 26 December 2004 Indian Ocean tsunami over one measured and three idealized morphologies. The model is first shown to match well the observations taken at Kuala Meurisi, Sumatra, and then used to examine in detail the processes that occur during the tsunami. The model predicts that at a given cross-shore location the onshore flow accelerates rapidly to a maximum as the wavefront passes, and then gradually decelerates before reversing direction and flowing offshore. The onshore flow does not tend to zero everywhere at maximum inundation, but instead flow reversal occurs near the shoreline even as the wavefront continues to inundate landward. While some sediment is eroded by the passing wavefront, the suspension of sandy sediment is dominated by the long-duration, high-velocity backwash that occurs along the beach face and offshore of the shoreline. Some of the sediment suspended during backwash is advected shoreward by the subsequent wave, creating large spatial gradients in the suspended sediment concentrations, which may not be in equilibrium with the local hydrodynamics. The inundation and transport of sediment during a tsunami can be affected by complexities in the morphological profile and interactions between multiple waves, and many of the hydrodynamic and sediment transport processes predicted here are similar to analogous processes previously observed in the swash zone. Copyright 2011 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗
USGS2023

Train, inform, borrow, or combine? Approaches to process-guided deep learning for groundwater-influenced stream temperature prediction

Although groundwater discharge is a critical stream temperature control process, it is not explicitly represented in many stream temperature models, an omission that may reduce predictive accuracy, hinder management of aquatic habitat, and decrease user confidence. We assessed the performance of a previously-described process-guided deep learning model of stream temperature in the Delaware River Basin (USA). We found lower accuracy (root mean square error [RMSE] of 1.71 versus 1.35°C) and stronger seasonal bias (absolute mean monthly bias of 1.06 vs. 0.68°C) for reaches primarily influenced by deep groundwater as compared to atmospheric conditions. We then tested four approaches for improving groundwater process representation: (a) a custom loss function leveraging the unique patterns of air and water temperature coupling characteristic of different temperature drivers, (b) inclusion of additional groundwater-relevant catchment attributes, (c) incorporation of additional process model outputs, and (d) a composite model. The custom loss function and the additional attributes significantly improved the predictive accuracy in groundwater-dominated reaches (RMSE of 1.37 and 1.26°C) and reduced the seasonal bias (absolute mean monthly bias of 0.44 and 0.48°C), but neither approach could identify holdout groundwater reaches. Variable importance analysis indicates the custom loss function nudges the model to use the existing inputs more efficiently, whereas with the added features the model relies on a broader suite of inputs. This analysis is a substantial step toward more accurately representing groundwater discharge processes in stream temperature models and will improve predictive accuracy and inform habitat management.

Delaware River Basin↗
USGS2010

Simulation of aerobic and anaerobic biodegradation processes at a crude oil spill site

A two-dimensional, multispecies reactive solute transport model with sequential aerobic and anaerobic degradation processes was developed and tested. The model was used to study the field-scale solute transport and degradation processes at the Bemidji, Minnesota, crude oil spill site. The simulations included the biodegradation of volatile and nonvolatile fractions of dissolved organic carbon by aerobic processes, manganese and iron reduction, and methanogenesis. Model parameter estimates were constrained by published Monod kinetic parameters, theoretical yield estimates, and field biomass measurements. Despite the considerable uncertainty in the model parameter estimates, results of simulations reproduced the general features of the observed groundwater plume and the measured bacterial concentrations. In the simulation, 46% of the total dissolved organic carbon (TDOC) introduced into the aquifer was degraded. Aerobic degradation accounted for 40% of the TDOC degraded. Anaerobic processes accounted for the remaining 60% of degradation of TDOC: 5% by Mn reduction, 19% by Fe reduction, and 36% by methanogenesis. Thus anaerobic processes account for more than half of the removal of DOC at this site.

Water Resources Research↗
USGS2012

Rupture process of a multiple main shock sequence: analysis of teleseismic, local and field observations of the Tennant Creek, Australia, earthquakes of January 22, 1988

On January 22, 1988, three large intraplate earthquakes (with M S 6.3, 6.4, and 6.7) occurred within a 12-hour period near Tennant Creek, Australia. These earthquakes, which occurred over a small interval of time and within a small volume of space, present a unique opportunity to study the rupture process of the class of intraplate earthquakes that occur as multiple main shocks. Broadband displacement and velocity records of body waves from teleseismically recorded data are analyzed to determine source mechanisms, depths, and complexity of rupture of each of the three main shocks. Hypocenters of an additional 150 foreshocks and aftershocks constrained by local arrival time data and field observations of surface rupture are used to complement the source characteristics of the main shocks in order to derive as complete a description of the rupture process as possible. The interpretation of the combined data sets suggests that the overall rupture process involved unusually complicated stress release. As locations of the main shock hypocenters progressively moved from west to east, we infer that the first and third main shocks, denoted as MS 1 and MS 3 , produced the southeast-northwest trending scarps observed at the western end (the Kunayungku fault) and at the eastern end (the east end of the Lake Surprise fault), respectively, of the rupture zone. The epicenter of the only immediate foreshock was located in the gap between these two fault scarps. MS 1 nucleated near this epicenter and ruptured upward and to the northwest from a depth of 6.5 km. MS 3 ruptured predominantly to the SE at a depth of 4.5 km. The second main shock, MS 2 , is inferred to have produced the deformation of the southwest trending central scarp segment (the western end of the Lake Surprise fault). From the sense of thrusting seen at the surface and from the distribution of aftershock hypocenters, the south dipping nodal planes derived from waveform modeling are identified as the fault planes for earthquakes MS1 and MS 3 . In contrast, the dip of the central fault scarp is reversed relative to the dips of the western and eastern fault scarps. The rupture process Of MS 2 turns out to be commensurately complex and sufficiently explains the geological complexity. MS 2 consisted of three subevents. The southeast dipping nodal plane of the first two subevents is coplanar with a southeast dipping plane implied by locations of aftershocks which did not break the surface. Choice of the north dipping plane as the rupture plane of the third subevent, consistent with the surface deformation and coplanar with a second plane delineated by aftershocks, would imply conjugate faulting. The majority of the aftershocks are concentrated near the edges of the fault planes, and there is an absence of activity in the center of the planes. The areas of absent activity may represent the failed asperities of the main shocks in which substantial stress relief occurred. The rupture process of each main shock is characterized by the rapid release of energy followed by a much slower release of moment and by aftershock zones whose dimensions exceed the inferred dimensions of the rupture. These characteristics suggest that substantial slow slip occurred on each of the three fault interfaces that was not accompanied by major energy release. The first main shock nucleated at the deepest part of its aftershock zone and ruptured upward. In contrast, MS 2 and MS 3 nucleated at depths that were one third to one half of the maximum depth of their aftershock zones. This variation of focal depth and the strong increase of moment and radiated energy with each main shock imply that lateral variations of strength were more important than vertical gradients of shear stress in controlling the progression of rupture.

Journal of Geophysical Research Solid Earth↗
USGS2011

Diel biogeochemical processes and their effect on the aqueous chemistry of streams: A review

This review summarizes biogeochemical processes that operate on diel, or 24-h, time scales in streams and the changes in aqueous chemistry that are associated with these processes. Some biogeochemical processes, such as those producing diel cycles of dissolved O 2 and pH, were the first to be studied, whereas processes producing diel concentration cycles of a broader spectrum of chemical species including dissolved gases, dissolved inorganic and organic carbon, trace elements, nutrients, stable isotopes, and suspended particles have received attention only more recently. Diel biogeochemical cycles are interrelated because the cyclical variations produced by one biogeochemical process commonly affect another. Thus, understanding biogeochemical cycling is essential not only for guiding collection and interpretation of water-quality data but also for geochemical and ecological studies of streams. Expanded knowledge of diel biogeochemical cycling will improve understanding of how natural aquatic environments function and thus lead to better predictions of how stream ecosystems might react to changing conditions of contaminant loading, eutrophication, climate change, drought, industrialization, development, and other factors.

Chemical Geology↗
USGS2014

Relationships between protein-encoding gene abundance and corresponding process are commonly assumed yet rarely observed

For any enzyme-catalyzed reaction to occur, the corresponding protein-encoding genes and transcripts are necessary prerequisites. Thus, a positive relationship between the abundance of gene or transcripts and corresponding process rates is often assumed. To test this assumption, we conducted a meta-analysis of the relationships between gene and/or transcript abundances and corresponding process rates. We identified 415 studies that quantified the abundance of genes or transcripts for enzymes involved in carbon or nitrogen cycling. However, in only 59 of these manuscripts did the authors report both gene or transcript abundance and rates of the appropriate process. We found that within studies there was a significant but weak positive relationship between gene abundance and the corresponding process. Correlations were not strengthened by accounting for habitat type, differences among genes or reaction products versus reactants, suggesting that other ecological and methodological factors may affect the strength of this relationship. Our findings highlight the need for fundamental research on the factors that control transcription, translation and enzyme function in natural systems to better link genomic and transcriptomic data to ecosystem processes.

The ISME Journal↗
USGS2020

Impacts of hydrothermal plume processes on oceanic metal cycles and transport

Chemical, physical and biological processes in hydrothermal plumes control the flux of elements from hydrothermal vents to the global oceans. The timescales of these processes range from less than a second, as the hydrothermal fluid mixes with seawater at the seafloor, to decades, as the plume disperses over thousands of kilometers. Integrating hydrothermal geochemistry throughout the lifetime of the plume reveals some well constrained processes, along with many surprises. For instance, contrary to the idea that metals are removed from the hydrothermal plume via oxidation, a survey of recent datasets reveals that oxidation of iron and manganese does not consistently result in their removal from the plume, and that manganese may be lost from the water column more rapidly than iron. These observations suggest that the understanding of element transport in hydrothermal plumes is incomplete, partly due to the change in removal processes as the plume disperses from less than 1 km from the vent to more than 4,000 km. We suggest that characterizing the plume based on regions that retain some reduced components versus those that are fully oxidized, in addition to buoyancy, will illuminate the nature of the dominant processes and allow a more complete understanding of the ultimate fate of hydrothermally derived metals.

Nature Geoscience↗