USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research C: Oceans”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

125 records · Page 7Linked to original sources
USGS2017

Refining the formation and early evolution of the Eastern North American Margin: New insights from multiscale magnetic anomaly analyses

To investigate the oceanic lithosphere formation and early seafloor spreading history of the North Atlantic Ocean, we examine multiscale magnetic anomaly data from the Jurassic/Early Cretaceous age Eastern North American Margin (ENAM) between 31 and 40°N. We integrate newly acquired sea surface magnetic anomaly and seismic reflection data with publicly available aeromagnetic and composite magnetic anomaly grids, satellite-derived gravity anomaly, and satellite-derived and shipboard bathymetry data. We evaluate these data sets to (1) refine magnetic anomaly correlations throughout the ENAM and assign updated ages and chron numbers to M0–M25 and eight pre-M25 anomalies; (2) identify five correlatable magnetic anomalies between the East Coast Magnetic Anomaly (ECMA) and Blake Spur Magnetic Anomaly (BSMA), which may document the earliest Atlantic seafloor spreading or synrift magmatism; (3) suggest preexisting margin structure and rifting segmentation may have influenced the seafloor spreading regimes in the Atlantic Jurassic Quiet Zone (JQZ); (4) suggest that, if the BSMA source is oceanic crust, the BSMA may be M series magnetic anomaly M42 (~168.5 Ma); (5) examine the along and across margin variation in seafloor spreading rates and spreading center orientations from the BSMA to M25, suggesting asymmetric crustal accretion accommodated the straightening of the ridge from the bend in the ECMA to the more linear M25; and (6) observe anomalously high-amplitude magnetic anomalies near the Hudson Fan, which may be related to a short-lived propagating rift segment that could have helped accommodate the crustal alignment during the early Atlantic opening.

Journal of Geophysical Research B: Solid Earth↗
USGS2019

Shear velocity structure from ambient noise and teleseismic surface wave tomography in the Cascades around Mount St. Helens

Mount St. Helens (MSH) lies in the forearc of the Cascades where conditions should be too cold for volcanism. To better understand thermal conditions and magma pathways beneath MSH, data from a dense broadband array are used to produce high‐resolution tomographic images of the crust and upper mantle. Rayleigh‐wave phase‐velocity maps and three‐dimensional images of shear velocity ( Vs ), generated from ambient noise and earthquake surface waves, show that west of MSH the middle‐lower crust is anomalously fast (3.95 ± 0.1 km/s), overlying an anomalously slow uppermost mantle (4.0–4.2 km/s). This combination renders the forearc Moho weak to invisible, with crustal velocity variations being a primary cause; fast crust is necessary to explain the absent Moho. Comparison with predicted rock velocities indicates that the fast crust likely consists of gabbros and basalts of the Siletzia terrane, an accreted oceanic plateau. East of MSH where magmatism is abundant, middle‐lower crust Vs is low (3.45–3.6 km/s), consistent with hot and potentially partly molten crust of more intermediate to felsic composition. This crust overlies mantle with more typical wave speeds, producing a strong Moho. The sharp boundary in crust and mantle Vs within a few kilometers of the MSH edifice correlates with a sharp boundary from low heat flow in the forearc to high arc heat flow and demonstrates that the crustal terrane boundary here couples with thermal structure to focus lateral melt transport from the lower crust westward to arc volcanoes.

Washington↗
USGS2021

Limited mantle hydration by bending faults at the Middle America Trench

Seismic anisotropy measurements show that upper mantle hydration at the Middle America Trench (MAT) is limited to serpentinization and/or water in fault zones, rather than distributed uniformly. Subduction of hydrated oceanic lithosphere recycles water back into the deep mantle, drives arc volcanism, and affects seismicity at subduction zones. Constraining the extent of upper mantle hydration is an important part of understanding many fundamental processes on Earth. Substantially reduced seismic velocities in tomography suggest that outer rise plate‐bending faults provide a pathway for seawater to rehydrate the slab mantle just prior to subduction. Estimates of outer‐rise hydration based on tomograms vary significantly, with some large enough to imply that, globally, subduction has consumed more than two oceans worth of water during the Phanerozoic. We found that, while the mean upper mantle wavespeed is reduced at the MAT outer rise, the amplitude and orientation of inherited anisotropy are preserved at depths >1 km below the Moho. At shallower depths, relict anisotropy is replaced by slowing in the fault‐normal direction. These observations are incompatible with pervasive hydration but consistent with models of wave propagation through serpentinized fault zones that thin to <100‐m in width at depths >1 km below Moho. Confining hydration to fault zones reduces water storage estimates for the MAT upper mantle from ∼3.5 wt% to <0.9 wt% H 2 0. Since the intermediate thermal structure in the ∼24 Myr‐old MAT slab favors serpentinization, limited hydration suggests that fault mechanics are the limiting factor, not temperatures. Subducting mantle may be similarly dry globally.

Journal of Geophysical Research↗
USGS2020

Structural control on megathrust rupture and slip behavior: Insights from the 2016 Mw 7.8 Pedernales Ecuador earthquake

The heterogeneous seafloor topography of the Nazca Plate as it enters the Ecuador subduction zone provides an opportunity to document the influence of seafloor roughness on slip behavior and megathrust rupture. The 2016 Mw 7.8 Pedernales Ecuador earthquake was followed by a rich and active postseismic sequence. An internationally coordinated rapid response effort installed a temporary seismic network to densify coastal stations of the permanent Ecuadorian national seismic network. A combination of 82 onshore short and intermediate period and broadband seismic stations and six ocean bottom seismometers recorded the postseismic Pedernales sequence for over a year after the mainshock. A robust earthquake catalog combined with calibrated relocations for a subset of magnitude ≥4 earthquakes shows pronounced spatial and temporal clustering. A range of slip behavior accommodates postseismic deformation including earthquakes, slow slip events, and earthquake swarms. Models of plate coupling and the consistency of earthquake clustering and slip behavior through multiple seismic cycles reveal a segmented subduction zone primarily controlled by subducted seafloor topography, accreted terranes, and inherited structure. The 2016 Pedernales mainshock triggered moderate to strong earthquakes (5 ≤ M ≤ 7) and earthquake swarms north of the mainshock rupture close to the epicenter of the 1906 Mw 8.8 earthquake and in the segment of the subduction zone that ruptured in 1958 in a Mw 7.7 earthquake.

Journal of Geophysical Research: Earth Surface↗
USGS2012

A seismic refraction survey of the Imperial Valley Region, California

The U.S. Geological Survey conducted an extensive seismic refraction survey in the Imperial Valley region of California in 1979. The Imperial Valley is located in the Salton Trough, an active rift between the Pacific and North American plates. Forty shots fired at seven shot points were recorded by 100 portable seismic instruments at typical spacing of 0.5–1 km. More than 1300 recording locations were occupied, and more than 3000 usable seismograms were obtained. We analyzed five profiles using a standard ray‐tracing program, constructed a contour map of reduced travel times from our most widely recorded shot point, and modeled an existing gravity profile across the Salton Trough. Results are itemized: (1) All models have in common a sedimentary layer ( V p = 1.8–5.0 km/s), a “transition zone” ( V p = 5.0–5.65 km/s), a basement ( V p = 5.65 km/s in the Imperial Valley, 5.9 km/s on the bordering mesas), and subbasement ( V p = 7.2 km/s). (2) The sedimentary layer ranges in thickness along the axis of the Salton Trough from 3.7 km (Salton Sea) to 4.8 km (U.S.‐Mexican border). On the bordering mesas it is quite variable in thickness. (3) The “transition” zone is about 1 km thick in most places. In the Imperial Valley there are no marked velocity discontinuities in this zone between the sedimentary layer and basement. On the bordering mesas, however, there is a discontinuity at the top of this zone. (4) There are apparently two types of basement. On the bordering mesas, basement is crystalline igneous and metamorphic rocks. In the Imperial Valley, basement is mostly lower‐greenshist‐facies sedimentary rocks, based primarily on the smooth transition in character from sediment to basement arrivals, the low value of basement velocity, and the fact that deep (4 km) wells in the valley penetrate only the upper part of the known Cenozoic stratigraphic column for the Salton Trough. (5) The subbasement, or intermediate crustal layer, ranges in depth along the axis of the Salton Trough from 16 km (Salton Sea) to 10 km (U.S.‐Mexican border). Gravity modeling requires that this layer deepen and/or pinch out beneath the bordering mesas and mountain ranges. Based on its high velocity and the presence of intrusive basaltic rocks in the sedimentary section in the Imperial Valley, the subbasement is thought to be a mafic intrusive complex similar to oceanic middle crust. (6) Several structures are seen that affect basement, transition zone, and deeper parts of the sedimentary layer. They include a scarp along the Imperial fault, as much as 1 km down to the northeast, and a scarp passing roughly along the topographic boundary between the Imperial Valley and the bordering mesa to the west, as much as 3½ km down to the east. We interpret the latter scarp to be the suture, or rift boundary, between the older crystalline basement on the mesa and the younger metasedimentary basement in the Imperial Valley. (7) On a contour map of reduced travel time from our most widely recorded shot point, subtle patches of early arrivals among otherwise late arrivals in the central Imperial Valley correlate well with known geothermal resource areas having reservoir temperatures of more than 150°C. Apparently the Salton Trough is a location where new crust is being generated. As the rift opens, mafic intrusive rocks fill it from below as sedimentary rocks fill it from above. Rifting and intrusion produce high heat flow that metamorphoses the sedimentary rocks to shallow depth (metasedimentary basement in the Imperial Valley) and thus consolidates the new crust.

California↗
USGS2012

Global petrologic variations on the moon: A ternary-diagram approach.

A ternary-diagram approach for determination of global petrologic variations on the lunar surface is presented that incorporates valuable improvements in our previous method of using geochemical variation diagrams. This new approach uses a ternary diagram that is subdivided into equally spaced segments along each of its three sides and has a triangular area in its center. The segments are assigned distinct colors that cover the range of the visible spectrum. The apexes are assigned the three primary colors, and the center triangle, which represents equal proportions of the three apexes, is assigned the color gray. The apexes are assigned the average Fe and (Th/Ti) c (ratio normalized to chondrites) compositions of KREEP/Mg-suite rocks, mare basalts, and ferroan anorthosites. The composition of each picture element (pixel) within these Apollo orbital gamma ray databases is used to determine its position within the ternary diagram. The color corresponding to this ternary position is then placed on a classification map at that pixel's position within the orbital databases. Error databases produced for the Fe and (Th/Ti) c data were used to exclude pixels having high errors. The resultant classification map shows spatial transitions among petrologic units, allows direct determination of the relative proportions of each end-member composition in a pixel, and increases the geologic interpretability of these data over that of the individual elemental databases. The classification units correspond remarkably well to observed geologic units, when we consider the spatial resolution (100 km) of the gamma ray spectrometer. Our results are as follows: (1) The highlands contain large areas of relatively pure ferroan anorthosite. (2) The average composition of the upper lunar crust is represented by an “anorthositic gabbro” composition, which supports the “magma-ocean” hypothesis for lunar crustal genesis. (3) KREEP/Mg-suite rocks are a minor fraction of the upper lunar crust. (4) Within the farside highlands, areas of KREEP/Mg-suite rocks coincide mostly with areas of crustal thinning, which are probably areas of KREEP basalt extrusions or localized excavations of Mg-suite rocks or KREEP-rich rocks. (5) Portions of the east limb and farside highlands have considerable amounts of a mafic, chondritic Th/Ti component (like mare basalt) whose occurrences coincide with mapped concentrations of light plains that display dark-halo craters; the presence of this component supports the hypothesis that mare volcanism had occurred within this highland region before the end of final heavy bombardment.

Journal of Geophysical Research Solid Earth↗
USGS2012

Mineralogy and geochemistry of a sediment‐hosted hydrothermal sulfide deposit from the Southern Trough of Guaymas Basin, Gulf of California

Samples dredged from a 15‐m‐high hydrothermal mound atop the flat turbidite pond in the Southern Trough of Guaymas Basin consist of pyrrhotite‐rich massive sulfide, barite, barite + calcite, talc, and opaline silica as well as substrate material composed of fossiliferous, clay‐rich ooze. An 11‐m‐long sediment core taken near the dredge site shows increasing hydrothermal alteration with depth; anhydrite‐filled fractures near the base of the core appear to be channels for hydrothermal discharge. Oxidation of the sulfide‐rich samples to an assemblage of geothite, lepidocrocite, and amorphous Fe oxyhydroxide is ubiquitous. Compared to other massive sulfide deposits on sediment‐starved oceanic ridges, the hydrothermal deposit dredged in Guaymas Basin has a high pyrrhotite/pyrite ratio, a low Zn sulfide and combined ore metal (Cu + Zn + Pb + Ag + Cd) content, and a greater abundance of sulfate, carbonate, and silicate phases. Venting hydrothermal solutions are alkaline with moderately high p H; high Ca, Ba, and SiO 2 content; low ƒS 2 and ƒo 2 ; and very low transition metal content. Disequilibrium assemblages of pyrrhotite and sulfate minerals form during rapid mixing of this evolved vent fluid with ambient bottom waters at the discharge site. Talc is formed at a temperature near 270°C by mixing or entrainment of Mg‐rich bottom water or pore fluid with upwelling hydrothermal fluid that is saturated with silica. Calcite may precipitate from the alkaline, Ca‐rich fluid during degassing of CO 2 . The minimum temperature range for sulfide and nonsulfide deposition is approximately 190°–326°C. The composition of hydrothermal deposits, vent solutions, and altered sediment requires that circulating fluids evolve during deep penetration into the basaltic basement complex, further interaction with the organic‐and carbonate‐rich sediment pile, and near‐surface mixing with ambient seawater. Although the stable assemblage albite‐epidote‐clinochlore present at depth in the sediment pile requires very low dissolved Mg and Fe in the altering fluid, the addition of Mg to deeply buried sediment indicates significant recharge of the system by Guaymas Basin bottom water.

Southern Trough of Guaymas Basin↗
USGS1998

Observations on basaltic lava streams in tubes from Kilauea Volcano, island of Hawai'i

From 1986 to 1997, the Pu'u 'O'o-Kupaianaha eruption of Kilauea produced a vast pahoehoe flow field fed by lava tubes that extended 10–12 km from vents on the volcano's east rift zone to the ocean. Within a kilometer of the vent, tubes were as much as 20 m high and 10–25 m wide. On steep slopes (4–10°) a little farther away from the vent, some tubes formed by roofing over of lava channels. Lava streams were typically 1–2 m deep flowing within a tube that here was typically 5 m high and 3 m wide. On the coastal plain (<1°), tubes within inflated sheet flows were completely filled, typically 1–2 m high, and several tens of meters wide. Tubes develop as a flow's crust grows on the top, bottom, and sides of the tubes, restricting the size of the fluid core. The tubes start out with nearly elliptical cross-sectional shapes, many times wider than high. Broad, flat sheet flows evolve into elongate tumuli with an axial crack as the flanks of the original flow were progressively buried by breakouts. Temperature measurements and the presence of stalactites in active tubes confirmed that the tube walls were above the solidus and subject to melting. Sometimes, the tubes began downcutting. Progressive downcutting was frequently observed through skylights; a rate of 10 cm/d was measured at one skylight for nearly 2 months.

Journal of Geophysical Research B: Solid Earth↗
USGS2005

Nearshore wave-induced cyclical flexing of sea cliffs

[1] Evolution of a tectonically active coast is driven by geomorphically destructive energy supplied by ocean waves. Wave energy is episodic and concentrated; sea cliffs are battered by the geomorphic wrecking ball every 4-25 s. We measure the response of sea cliffs to wave assault by sensing the ground motion using near-coastal seismometers. Sea cliffs respond to waves in two distinct styles. High-frequency motion (20 Hz) reflects the natural frequency of the sea cliff as it rings in response to direct wave impact. Low-frequency motion in the 0.1-0.05 Hz (10-20 s) band consistently agrees with the dominant nearshore wave period. Integrating microseismic velocities suggests 50 ??m and 10 ??m displacements in horizontal and vertical directions, respectively. Displacement ellipsoids exhibit simultaneous downward and seaward sea cliff motion with each wave. Video footage corroborates the downward sea cliff flex in response to the imposed water load on the wave cut platform. Gradients in displacement amplitudes documented using multiple seismometers suggest longitudinal and shear strain of the flexing sea cliff on the order of 0.5-4 ?? strains during each wave loading cycle. As this sea cliff flexure occurs approximately 3 million times annually, it has the potential to fatigue the rock through cyclical loading. Local sea cliff retreat rates of 10 cm/yr imply that a given parcel of rock is flexed through roughly 109 cycles of increasing amplitude before exposure to direct wave attack at the cliff face. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗
USGS2018

Evolving environmental and geometric controls on Columbia Glacier’s continued retreat

Geometry strongly controls the dynamic behavior of marine‐terminating (tidewater) glaciers, significantly influencing advance and retreat cycles independent of climate. Yet the recent, nearly ubiquitous retreat of tidewater glaciers suggests that changes in atmospheric and oceanic forcing may also drive dynamic change. To isolate the influence of geometry on tidewater glacier dynamics, we analyzed detailed observational time series from 2012 to 2016 for two tidewater glaciers with shared dynamic histories and environmental forcing: Columbia Glacier and its former tributary (Post Glacier) in southcentral Alaska. We find that although terminus retreat has driven decadal‐scale changes in dynamics of the Columbia‐Post system, environmental factors contribute to short‐term (i.e., seasonal) dynamic variability. In particular, analysis of force balance time series indicates that observed variations in speed result from seasonal changes to the subglacial hydrologic system and associated changes in basal drag. Variations in terminus position only drive noticeable speed change when the terminus retreats from regions of relatively high basal drag. In agreement with long‐term analyses of Columbia Glacier, we find that terminus geometry can perturb the timing of seasonal ice flow patterns. Specifically, our data support the idea that retreat of a glacier terminus into deeper water is accompanied by a shift in the primary control on frontal ablation. Although our analysis focuses on two Alaskan glaciers, our data suggest that changes in the relative importance of surface meltwater and buoyancy effects on submarine melting and/or calving may manifest as a shift in terminus change seasonality and offer a mechanism to identify frontal ablation controls.

Alaska↗
USGS2012

Lead and strontium isotopes and related trace elements as genetic tracers in the Upper Cenozoic rhyolite-basalt association of the Yellowstone Plateau volcanic field

Supported by various field geologic and petrologic data, the contents of Pb, U, Th, Rb, and Sr and the isotopic compositions of Pb and Sr for upper Cenozoic volcanic rocks of the Yellowstone Plateau volcanic field are consistent with the hypothesis of derivation of the basaltic and rhyolitic magmas by partial melting of distinct source regions in the upper mantle and lower crust, respectively. All the basalt samples analyzed but one have systematically lower values of 207 Pb/ 204 Pb and 87 Sr/ 86 Sr than the rhyolites. The values of 206 Pb/ 204 Pb are smaller, and 87 Sr/ 86 Sr are mostly larger than known values in oceanic basalts. In all but one case, the values of 207 Pb/ 204 Pb are higher than expected from an extrapolation of known values in oceanic basalts to less radiogenic values of 206 Pb/ 204 Pb. Because there are no xenoliths, phenocrysts are only moderate to sparse in abundance, REE patterns are low and flat at the radiogenic end of lead isotopic compositions, several values of Rb/Sr are low, and 80% of the basalt samples form a well-developed secondary isochron separate from the rhyolites, we favor an interpretation for basalt genesis wherein isotopic signatures of most mafic magmas were attained in a continental ‘keel’ of mantlelike character about 2.6 b.y. old or somewhat older attached to the crust, and these signatures were unaltered by magma passage through the crust. At the very least, the current data continue to cast serious doubt as to the inevitability of crustal contamination for basaltic magma intruding the continental environment and postulate that much can be learned about the mantle under continents through the study of continental basalts. One basalt unit with an unusually low value of 207 Pb/ 204 Pb and an 87 Ar/ 86 Ar less than 0.704 may represent subcontinental ‘keel’-derived magma that rose unaltered to the surface. Our data also are not consistent with formation of this rhyolite-basalt association primarily by such processes as crystal fractionation, separation of immiscible silicate liquids from a common parental magma, or fractional melting of a homogeneous source. Rather as a conceptual model, we envision large mafic intrusions to have been injected into the lower crust resulting in rhyolite generation through partial anatexis of the adjacent wall rocks which probably had a 206 Pb/ 204 Pb < 17 and 87 Sr/ 86 Sr > 0.709; a model that has much in common with that proposed by Holmes (1931). All the other hypotheses listed have the necessary added complication that either the basalt or the rhyolite or both become contaminated after the two magma types separated, have problems accounting for the lack of igneous rocks of intermediate compositions or production of such large volumes of rhyolitic material (∼5000 km 3 ), and fail to explain why rhyolitic magma is not a more common occurrence in the ocean basin. We appeal to bouyancy of rhyolites to generate a barrier for basalt magma migration and account for the great preponderance of rhyolite relative to basalt at the surface. Furthermore, the complex isotopic picture in the rhyolites indicates that many of these magmas interacted with the upper crustal geologic units that they traversed. The interactions involved diverse processes, probably including reacton with hydrothermal fluids or hydrothermally altered rocks at high levels as well as by contamination with Phanerozoic sedimentary and Precambrian crystalline rocks at deeper levels. At the very least, we feel our study adds a cautionary note to the currently increasingly popular hypothesis that differentiation of basalt or gabbro magmas to rhyolite or granite (as distinct from tonalite or dacite) is a common occurrence and is therefore an important continential building process. Models for formation of rhyolite and granite predominantly by reworking of crust (anatexis) must still be considered. The primitive Archean mantle of the region was characterized by higher Rb/Sr, U/Pb, and Th/U values than are typical of modern suboceanic mantle. The mantle residuum within the continental subcrustal lithosperic ‘keel’ that resulted from the Archean crustal differentiation event probably was depleted in Rb/Sr and U/Pb, and the crust was correspondingly enriched in these ratios. The crust probably was further differentiated by an Archean high-grade metamorphism, during or after the primary event, into a granulitic lower crust depleted in U/Pb and Rb/Sr and a lower-grade upper crust enriched in these ratios.

Journal of Geophysical Research Solid Earth↗
USGS1998

Alteration and mineralization of an oceanic forearc and the ophiolite-ocean crust analogy

Mineralogical, chemical, and isotopic (O, C, S, and Sr) analyses were performed on minerals and bulk rocks from a forearc basement section to understand alteration processes and compare with mid-ocean ridges (MOR) and ophiolites. Ocean Drilling Program Hole 786B in the Izu-Bonin forearc penetrates 103 m of sediment and 725 m into volcanic flows, breccias, and basal dikes. The rocks comprise boninites and andesites to rhyolites. Most of the section was affected by low-temperature (<100°C) seawater alteration, with temperatures increasing downward. The rocks are partly (5–25%) altered to smectite, Fe-oxyhydroxide, calcite, and phillipsite, and exhibit gains of K, Rb, and P, loss of Ca, variable changes in Si, Na, Mg, Fe, Sr, and Y, and elevated δ 18 O and 87 Sr/ 86 Sr. Higher temperatures (∼150°C) in the basal dikes below 750 m led to more intense alteration and formation of chlorite-smectite, corrensite, albite, K-feldspar, and quartz (±chlorite). A 5 m thick hydrothermally altered and pyritized zone at 815 m in the basal dikes reacted with mixtures of seawater and hydrothermal fluids to Mg-chlorite, albite, and pyrite, and gained Mg and S and lost Si and Ca. Focused flow of hydrothermal fluids produced serialization halos (Na-K sericite, quartz, pyrophyllite, K-feldspar, and pyrite) along quartz veins at temperatures of 200°–250°C. High 87 Sr/ 86 Sr ratios of chloritized (∼0.7055) and sericitized (∼0.7065) rocks indicate involvement of seawater via mixing with hydrothermal fluids. Low δ 34 S of sulfide (−2 to −5.5‰) and sulfate (12.5‰) are consistent with input of magmatic SO 2 into hydrothermal fluids and disproportionation to sulfide and sulfate. Alteration processes were generally similar to those at MORs, but the arc section is more intensively altered, in part because of the presence of abundant glassy rocks and mafic phases. The increase in alteration grade below 750 m and the mineralization in the basal dikes are analogous to changes that occur near the base of the volcanic section in MOR and the Troodos ophiolite.

Journal of Geophysical Research B: Solid Earth↗
USGS2003

Fault trends on the seaward slope of the Aleutian Trench: Implications for a laterally changing stress field tied to a westward increase in oblique convergence

Normal faults along the seaward trench slope (STS) commonly strike parallel to the trench in response to bending of the oceanic plate into the subduction zone. This is not the circumstance for the Aleutian Trench, where the direction of convergence gradually changes westward, from normal to transform motion. GLORIA side-scan sonar images document that the Aleutian STS is dominated by faults striking oblique to the trench, west of 179??E and east of 172??W. These images also show a pattern of east-west trending seafloor faults that are aligned parallel to the spreading fabric defined by magnetic anomalies. The stress-strain field along the STS is divided into two domains west and east, respectively, of 179??E. Over the western domain, STS faults and nodal planes of earthquakes are oriented oblique (9??-46??) to the trench axis and (69??-90??) to the magnetic fabric. West of 179??E, STS fault strikes change by 36?? from the E-W trend of STS where the trench-parallel slip gets larger than its orthogonal component of convergence. This rotation indicates that horizontal stresses along the western domain of the STS are deflected by the increasing obliquity in convergence. An analytical model supports the idea that strikes of STS faults result from a superposition of stresses associated with the dextral shear couple of the oblique convergence and stresses caused by plate bending. For the eastern domain, most nodal planes of earthquakes strike parallel to the outer rise, indicating bending as the prevailing mechanism causing normal faulting. East of 172??W, STS faults strike parallel to the magnetic fabric but oblique (10??-26??) to the axis of the trench. On the basis of a Coulomb failure criterion the trench-oblique strikes probably result from reactivation of crustal faults generated by spreading. Copyright 2003 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Asian dust events of April 1998

On April 15 and 19, 1998, two intense dust storms were generated over the Gobi desert by springtime low-pressure systems descending from the northwest. The windblown dust was detected and its evolution followed by its yellow color on SeaWiFS satellite images, routine surface-based monitoring, and through serendipitous observations. The April 15 dust cloud was recirculating, and it was removed by a precipitating weather system over east Asia. The April 19 dust cloud crossed the Pacific Ocean in 5 days, subsided to the surface along the mountain ranges between British Columbia and California, and impacted severely the optical and the concentration environments of the region. In east Asia the dust clouds increased the albedo over the cloudless ocean and land by up to 10–20%, but it reduced the near-UV cloud reflectance, causing a yellow coloration of all surfaces. The yellow colored backscattering by the dust eludes a plausible explanation using simple Mie theory with constant refractive index. Over the West Coast the dust layer has increased the spectrally uniform optical depth to about 0.4, reduced the direct solar radiation by 30–40%, doubled the diffuse radiation, and caused a whitish discoloration of the blue sky. On April 29 the average excess surface-level dust aerosol concentration over the valleys of the West Coast was about 20–50 μg/m 3 with local peaks >100 μg/m 3 . The dust mass mean diameter was 2–3 μm, and the dust chemical fingerprints were evident throughout the West Coast and extended to Minnesota. The April 1998 dust event has impacted the surface aerosol concentration 2–4 times more than any other dust event since 1988. The dust events were observed and interpreted by an ad hoc international web-based virtual community. It would be useful to set up a community-supported web-based infrastructure to monitor the global aerosol pattern for such extreme aerosol events, to alert and to inform the interested communities, and to facilitate collaborative analysis for improved air quality and disaster management.

Journal of Geophysical Research D: Atmospheres↗
USGS2012

Evolution of deep structure along the trans-Alaska crustal transect, Chugach Mountains and Copper River Basin, southern Alaska

One of the most important results of the Trans-Alaska Crustal Transect investigations is the discovery that more than one third of the North American plate in southern Alaska (Chugach Mountains and Copper River basin) consists of tectonically underplated oceanic lithosphere. In southern Alaska, exposed accreted tectonostratigraphic terranes, include, from south to north along the transect, the Prince William, Chugach, Peninsular, and Wrangellia terranes. Chief results from seismic refraction data include the following: (1) A sequence of layers of low and high velocity (5.7–7.8 km/s), more than 10 km thick, dips gently northward, with its top at the surface in the southernmost Chugach terrane and at more than 20-km depth beneath the southern Peninsular terrane. A high-velocity layer at the top of this sequence corresponds to metabasalt in the southernmost Chugach terrane. This sequence is interpreted to be tectonically underplated fragments of the Kula plate and its sedimentary overburden. (2) An intermediate-velocity layer (6.35–6.5 km/s) at 9-km depth beneath both the northern Chugach and southern Peninsular terranes appears to extend without offset across the deep projection of the suture between these two terranes, the Border Ranges fault system. (3) A crustal “root” between depths of 19 and 57 km beneath the northern Peninsular and Wrangellia terranes appears to extend without offset across the deep projection of the suture between these two terranes, the West Fork fault system. This crustal root also appears to abut the tectonically underplated sequence to the south. Unfortunately, in results 2 and 3 the apparent crosscutting and abutting relationships can not be unambiguously resolved. Three scenarios, A, B, and C, have been offered to explain the evolution of this structure. Scenarios A and B differ in interpretation of the depth extent of the northern Chugach and southern Peninsular terranes. In scenario A these terranes extend to only 9-km depth, where they rest on an unknown middle crust, interpreted as a deeper part of the Peninsular terrane. In this scenario, the northern Chugach and southern Peninsular terrenes moved landward as a tectonic wedge, during tectonic underplating in the latest Cretaceous or early Tertiary, and uplifted the upper crust of the Peninsular terrane to the north. In scenario B, the northern Chugach and southern Peninsular terranes extend to 20-km depth. In this scenario, they were compressed but not detached and displaced during accretion. Scenarios A, B, and C differ in interpretation of the deep crustal root that appears to abut the tectonically underplated sequence. Since the Peninsular and Wrangellia terranes were at or below sea level prior to the mid-Cretaceous, the root was probably emplaced in mid-Cretaceous or younger times. In scenario A the root is lower crust of North America that moved southward during tectonic underplating of the Kula plate. In scenario B the root is, in part, tectonically underplated rocks similar to the Kula plate sequence to the south. In scenario C the root is, in part, magmatically underplated rocks.

Journal of Geophysical Research↗
USGS2012

Earthquakes in the Orozco transform zone: seismicity, source mechanisms, and tectonics

As part of the Rivera Ocean Seismic Experiment, a network of ocean bottom seismometers and hydrophones was deployed in order to determine the seismic characteristics of the Orozco transform fault in the central eastern Pacific. We present hypocentral locations and source mechanisms for 70 earthquakes recorded by this network. All epicenters are within the transform region of the Orozco Fracture Zone and clearly delineate the active plate boundary. About half of the epicenters define a narrow line of activity parallel to the spreading direction and situated along a deep topographic trough that forms the northern boundary of the transform zone (region 1). Most focal depths for these events are very shallow, within 4 km of the seafloor; several well-determined focal depths, however, are as great as 7 km. No shallowing of seismic activity is observed as the rise-transform intersection is approached; to the contrary, the deepest events are within 10 km of the intersection. First motion polarities for most of the earthquakes in region 1 are compatible with right-lateral strike slip faulting along a nearly vertical plane, striking parallel to the spreading direction. Another zone of activity is observed in the central part of the transform (region 2). The apparent horizontal and vertical distribution of activity in this region is more scattered than in the first, and the first motion radiation patterns of these events do not appear to be compatible with any known fault mechanism. Pronounced lateral variations in crustal velocity structure are indicated for the transform region from refraction data and measurements of wave propagation directions. The effect of this lateral heterogeneity on hypocenters and fault plane solutions is evaluated by tracing rays through a three-dimensional velocity grid. While findings for events in region 1 are not significantly affected, in region 2, epicentral mislocations of up to 10 km and azimuthal deflections of up to 45&deg; may result from assuming a laterally homogeneous velocity structure. When corrected for the effects of lateral heterogeneity, the epicenters and fault plane solutions for earthquakes in region 2 are compatible with predominantly normal faulting along a topographic trough trending NW&ndash;SE; the focal depths, however, are poorly constrained. These results suggest an en echelon spreading center or leaky transform regime in the central transform region.

Journal of Geophysical Research B: Solid Earth↗
USGS2009

Is the track of the Yellowstone hotspot driven by a deep mantle plume? - Review of volcanism, faulting, and uplift in light of new data

Geophysical imaging of a tilted mantle plume extending at least 500 km beneath the Yellowstone caldera provides compelling support for a plume origin of the entire Yellowstone hotspot track back to its inception at 17 Ma with eruptions of flood basalts and rhyolite. The widespread volcanism, combined with a large volume of buoyant asthenosphere, supports a plume head as an initial phase. Estimates of the diameter of the plume head suggest it completely spanned the upper mantle and was fed from sources beneath the transition zone, We consider a mantle–plume depth to at least 1,000 km to best explain the large scale of features associated with the hotspot track. The Columbia River–Steens flood basalts form a northward-migrating succession consistent with the outward spreading of a plume head beneath the lithosphere. The northern part of the inferred plume head spread (pancaked) upward beneath Mesozoic oceanic crust to produce flood basalts, whereas basalt melt from the southern part intercepted and melted Paleozoic and older crust to produce rhyolite from 17 to 14 Ma. The plume head overlapped the craton margin as defined by strontium isotopes; westward motion of the North American plate has likely “scraped off” the head from the plume tail. Flood basalt chemistries are explained by delamination of the lithosphere where the plume head intersected this cratonic margin. Before reaching the lithosphere, the rising plume head apparently intercepted the east-dipping Juan de Fuca slab and was deflected ~ 250 km to the west; the plume head eventually broke through the slab, leaving an abruptly truncated slab. Westward deflection of the plume head can explain the anomalously rapid hotspot movement of 62 km/m.y. from 17 to 10 Ma, compared to the rate of ~ 25 km/m.y. from 10 to 2 Ma. A plume head-to-tail transition occurred in the 14-to-10-Ma interval in the central Snake River Plain and was characterized by frequent (every 200–300 ka for about 2 m.y. from 12.7 to 10.5 Ma) “large volume (> 7000 km 3 )”, and high temperature rhyolitic eruptions (> 1000 °C) along a ~ 200–km-wide east–west band. The broad transition area required a heat source of comparable area. Differing characteristics of the volcanic fields here may in part be due to variations in crustal composition but also may reflect development in differing parts of an evolving plume where the older fields may reflect the eruption from several volcanic centers located above very large and extensive rhyolitic magma chamber(s) over the detached plume head while the younger fields may signal the arrival of the plume tail intercepting and melting the lithosphere and generating a more focused rhyolitic magma chamber. The three youngest volcanic fields of the hotspot track started with large ignimbrite eruptions at 10.21, 6.62, and 2.05 Ma. They indicate hotspot migration N55° E at ~ 25 km/m.y. compatible in direction and velocity with the North American Plate motion. The Yellowstone Crescent of High Terrain (YCHT) flares outward ahead of the volcanic progression in a pattern similar to a bow-wave, and thus favors a sub-lithospheric driver. Estimates of YCHT-uplift rates are between 0.1 and 0.4 mm/yr. Drainage divides have migrated northeastward with the hotspot. The Continental Divide and a radial drainage pattern now centers on the hotspot. The largest geoid anomaly in the conterminous U.S. is also centered on Yellowstone and, consistent with uplift above a mantle plume. Bands of late Cenozoic faulting extend south and west from Yellowstone. These bands are subdivided into belts based both on recency of offset and range-front height. Fault history within these belts suggests the following pattern: Belt I — starting activity but little accumulated offset; Belt II — peak activity with high total offset and activity younger than 14 ka; Belt III — waning activity with large offset and activity younger than 140 ka; and Belt IV — apparently dead on substantial range fronts (south side of the eastern Snake River Plain only). These belts of fault activity have migrated northeast in tandem with the adjacent hotspot volcanism. On the southern arm of the YCHT, fault activity occurs on the inner, western slope consistent with driving by gravitational potential energy, whereas faulting has not started on the eastern, outer, more compressional slope. Range fronts increase in height and steepness northeastward along the southern-fault band. Both the belts of faulting and the YCHT are asymmetrical across the volcanic hotspot track, flaring out 1.6 times more on the south than the north side. This and the southeast tilt of the Yellowstone plume may reflect southeast flow of the upper mantle.

Wyoming↗