USGS Science⌕ Search

SEARCH · USGS Science

Results for “International Journal of Coal Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

Paleoecology of the Springfield Coal Member (Desmoinesian, Illinois Basin) near the Leslie Cemetery paleochannel, southwestern Indiana

The Springfield Coal Member (Carbondale Group, Petersburg Formation of Indiana) is split locally in Warrick and Gibson Counties, Indiana, by clastic rocks of the Folsomville Member (Carbondale Group, Petersburg Formation) that represent the Leslie Cemetery paleochannel, part of a large, interconnected paleochannel system in the Springfield coal bed. This study incorporated analysis of miospore and megaspore assemblages, coal petrography, plant compression fossils and conodonts from the coal and clastic split to document changes in the swamp and its vegetation in response to the activity of the Leslie Cemetery paleochannel. Palynological and petrographic data indicate that environmental conditions and vegetation in the lower bench of coal near the Leslie Cemetery paleochannel were similar to those found in profiles through the coal bed at sites near the larger, more extensive Galatia paleochannel. Miospore floras of the high-vitrinite, lower bench of coal were dominated by tree-fern miospores, with those of lycopsids ranking second in abundance; megaspore assemblages were dominated by lycopsid megaspores. Near the contacy between the lower bench of coal and clastic split, medullosan prepollen increases in abundance and fusain bands are more common, which may indicate the occurrence of fire, either within or outside the swamp. Vegetation in the Folsomville Member and upper bench of coal differ markedly from that of the lower bench of coal. Plant megafossils from the Folsomville Member indicate dominance by pteridosperms and/or lycopsids and Folsomville Member miospore assemblages are dominated by lycopsid miospores most typically found in mudstones, including Lycospora torquifer and higher than normal abundances of Granasporites medius . In the transition from clastic rocks of the Folsomville Member to the upper bench of coal, miospores of ‘ecotonal’ lycopsids ( Paralycopodites ) reach their peak abundance, pteridosperms dominate megafossil assemblages and inertinite levels are relatively high. At higher levels of the upper bench of coal, vitrinite levels are higher and miospore assemblages are dominated by lycopsid miospores typical of coal swamps ( Lycospora granulata, L. pusilla ). The presence of conodonts in coalballs in the upper bench of coal and spirorbid worms in the split indicate that the paleoswamp may have received some marine or brackish water influence. Higher than normal salinity levels may explain the vegetational changes observed in the upper bench of coal near the Leslie Cemetery paleochannel.

Indiana↗

A debris flow deposit in alluvial, coal-bearing facies, Bighorn Basin, Wyoming, USA: Evidence for catastrophic termination of a mire

Coal and clastic facies investigations of a Paleocene coal-bearing succession in the Grass Creek coal mine, southwestern Bighorn Basin, Wyoming, USA, suggest that disruption of peat accumulation in recurrent mires was caused by the repetitive progradation of crevasse splays and, ultimately, by a catastrophic mass movement. The mass movement, represented by deposits of debris flow, marked the termination of significant peat accumulation in the Grass Creek coal mine area. Megascopic and microscopic analyses of coal beds exposed along the mine highwalls suggest that these deposits developed in low-lying mires, as evidenced primarily by their ash yields and maceral composition. Disruption of peat accumulation in successive mires was caused by incursions of sediment into the mire environments. Termination by crevasse splay progradation is represented by coarsening-upward successions of mudrock and tabular, rooted sandstone, which overlie coal beds in the lower part of the coal-bearing interval. A more rapid process of mire termination by mass movement is exemplified by a debris flow deposit of diamictite, which overlies the uppermost coal bed at the top of the coal-bearing interval. The diamictite consists of a poorly sorted, unstratified mixture of quartzite cobbles and pebbles embedded in a claystone-rich or sandy mudstone matrix. Deposition of the diamictite may have taken place over a matter of weeks, days, or perhaps even hours, by catastrophic flood, thus reflecting an instantaneous process of mire termination. Coarse clastics and mud were transported from the southwest some 20–40 km as a viscous debris flow along stream courses from the ancestral Washakie Range to the Grass Creek area, where the flow overrode a low-lying mire and effectively terminated peat accumulation.

International Journal of Coal Geology↗

Characteristics of zircons from volcanic ash-derived tonsteins in Late Permian coal fields of eastern Yunnan, China

Kaolinitic tonsteins of altered synsedimentary volcanic ash-fall origin are well developed in the Late Permian coal-bearing formations of eastern Yunnan Province. Because of their unique origin, wide lateral extent, relatively constant thickness and sharp contacts with enclosing strata, great importance has been attached to these isochronous petrographic markers. In order to compare tonsteins with co-existing, non-cineritic claystones and characterize the individuality of tonsteins from different horizons for coal bed correlation, a semi-quantitative method was developed that is based on statistical analyses of the concentration and morphology of zircons and their spatial distribution patterns. This zircon-based analytical method also serves as a means for reconstructing volcanic ash-fall dispersal patterns. The results demonstrate that zircons from claystones of two different origins (i.e., tonstein and non-cineritic claystone) differ greatly in their relative abundances, crystal morphologies and spatial distribution patterns. Tonsteins from the same area but from different horizons are characterized by their own unique statistical patterns in terms of zircon concentration values and morphologic parameters (crystal length, width and the ratio of these values), thus facilitating stratigraphic correlation. Zircons from the same tonstein horizon also show continuous variation in these statistical patterns as a function of areal distribution, making it possible to identify the main path and direction in which the volcanic source materials were transported by prevailing winds.

International Journal of Coal Geology↗

Coal compositional changes along a mire interior to mire margin transect in the Mary Lee coal bed, Warrior Basin, Alabama, USA

Vertical increment samples of the Mary Lee coal bed, collected along an inferred mire interior to mire margin transect, were studied palynologically, petrographically and geochemically to determine if any vertical or lateral changes in coal composition could be detected. Results show the Mary Lee palynoflora to be dominated by Lycospora spp. (arboreous lycophytes), with other lycophyte genera, Crassispora (Sigillaria) and Densosporites (small lycophytes), occurring less frequently. Commonly encountered fern/pteridosperm miospore genera include Leiotriletes, Granulatisporites, Lophotriletes and Schulzospora . Calamospora , representing calamites, and Florinites , representing cordaites, are minor constituents of the overall palynoflora. Petrographically, the Mary Lee coal bed contains high percentages (> 75% mineral matter free, mmf) of vitrinite macerals, with cryptotelinite being by far the most common type. Cryptogelocollinite is the second most abundant vitrinite maceral. Inertinite maceral percentages are variable, ranging from 8% to 30% (mmf) and liptinite macerals are a relatively minor constituent of the Mary Lee coal bed (3–8% mmf). Both vertical and lateral changes in coal composition occur along the transect studied. Lateral changes include an increase in ash yield and sulfur content from the interior to margin; for example, the average ash yield and sulfur content at location 073 (most interior) are 13.7% and 0.55%, respectively, whereas at location 083 (most marginal) the average ash and sulfur values (calculated from coal increments only) are 32.3% and 3.62%, respectively. Palynofloral changes, from the interior to margin, include a general increase in Lycospora pusilla (Lepidodendron) over Lycospora pellucida (Lepidophloios) and an increase in fern and calamite spores and cordaite pollen. An increase in poorly preserved miospore assemblages was also observed in this direction. At locations 016 and 026, coal increments between the lower and middle partings were barren of palynomorphs, except for one increment in column 016. Petrographically, these increments were completely (> 95% mmf) dominated by cryptotelinite; both liptinite and inertinite macerals were conspicuously absent. In contrast, increments above the middle partings at these locations contained elevated percentages of inertinite macerals, relative to more interior locations. Vertical changes were also noted. At mire interior locations, basal coal layers contain either an arboreous lycophyte-dominant assemblage, with abundant Lycospora pusilla , or a lycophyte-fern/pteridosperm co-dominant assemblage. This palynoflora grades upward into a Lycospora pellucida, L. granula -dominant palynoflora in the middle layers and ultimately into a palynoflora containing an abundant fern/pteridosperm element. Petrographically, the coal at these locations is dominated overall by cryptotelinite, with an increase in inertinite occurring in the uppermost increments. The overall dominance of arboreous lycophytes and cryptotelinite in the Mary Lee coal bed suggests that the Mary Lee paleomire developed under predominantly wet conditions. The moderate (at interior locations) to high (at marginal locations) ash yield of the coal further suggests that the mire developed under planar to near-planar conditions.

International Journal of Coal Geology↗

Palynologic and petrographic intervals in the upper Pennsylvanian McLeansboro Group, Western Kentucky

The McLeansboro Group (formerly the Sturgis Formation) in the Western Kentucky coal field spans the upper Desmoinesian (Westphalian D) and the Missourian and Virgilian series (Stephanian). Extensive drilling has demonstrated the lateral continuity of major and minor beds in the group, making it possible to study vertical and lateral changes in palynology and petrology. Significant features of the McLeansboro Group are the marine zones over most of the coals and paleochannels, which are the only disruptions to the continuity of other lithologies. The Desmoinesian Baker (No. 13) and Wheatcroft (No. 13a) coal beds were included in the study but the primary emphasis is on the Missourian and Virgilian coals. Patoka Formation (lower Missourian) coals are dominated by tree fern spores with lesser amounts of sphenopsids, ferns and cordaites spores. This is in marked contrast to the arborescent lycopod-dominated Desmoinesian coals. Only the No. 15 coal bed exceeds 80% vitrinite: the vitrinite content of the No. 16 coal bed is less than 72%, the lowest of any Western Kentucky humic coal. The Bond Formation (upper Missourian) represents a distinct floristic interval, with a greater diversity of plant groups than in the Patoka Formation. Herbaceous lycopod spores, which are relatively minor contributors to the Patoka coals, are common in the Bond Formation. The coals generally exceed 80% vitrinite. The Mattoon Formation (Virgillian) coals have a variety of palynomorph assemblages. The low-sulfur Geiger Lake coal bed is dominated by tree fern spores, with important contributions from other ferns and sphenopsids. Similar to the underlying tree fern interval, vitrinite contents are less than 80%. The uppermost Mattoon coals are dominated by tree ferns and are notable in being the only coals more than 1 m thick in the Stephanian portion of the section, with the top coal being 4.3 m thick. The uppermost coals generally contain more than 80% vitrinite. The Permian Mauzy Formation overlies the McLeansboro Group. The palynologic/petrographic intervals appear to represent fluctuating dry (low vitrinite) and wet intervals within the Stephanian, which was itself drier than the Westphalian D.

International Journal of Coal Geology↗

Geochemistry of autochthonous and hypautochthonous siderite-dolomite coal-balls (Foord Seam, Bolsovian, Upper Carboniferous), Nova Scotia, Canada

The 11–13 m thick Foord Seam in the fault-bounded Stellarton Basin, Nova Scotia, is the thickest seam from the Euramerican floral province known to contain coal-balls. In addition to the first discovery of autochthonous coal-balls in the Foord Seam, Nova Scotia, its shale parting also contains hypautochthonous coal-balls with histologically preserved plant structures. The coal-ball discovery helps fill a stratigraphic gap in coal-ball occurrences in the upper Carboniferous (Bolsovian) of Euramerica. The autochthonous and hypautochthonous coal-balls have a similar mineralogical composition and are composed of siderite (81–100%), dolomite-ankerite (0–19%), minor quartz and illite, and trace amounts of `calcite'. Similar is also their permineralizing mineralogy, which consists of dolomite-ankerite and siderite. Their low pyrite content and carbonate mineralogy, and nonmarine origin, differentiates the Foord Seam coal-balls from other Euramerican coal-ball occurrences. A preliminary geochemical model, which is based on oxygen and carbon isotopic data, indicates that siderite in both the autochthonous and hypautochthonous coal-balls is of very early diagenetic (nonmarine) origin from 13 C-enriched bicarbonate derived from bacterial methanogenesis of organic matter.

International Journal of Coal Geology↗

The role of palynology in paleoecological analyses of Tertiary coals

Pollen, spores, and other plant microfossils are important constituents of Tertiary coals, both as petrographic components (the maceral sporinite) and as distinctive indicators of the nature of the depositional environment in which the coal-forming peat accumulated. Palynological analyses, which have been conducted on Tertiary coals since the 1930's, play an increasingly important role in modern paleoecological analyses of coals. Among the most important factors controlling the petrographic composition and facies characteristics of coal deposits are the types and relative abundances of plants that composed the peat. At present, wetland environments in which peat accumulates (mires) range from marshes and bogs to forested swamps; each is inhabited by distinctive plant communities. These plant communities are associated with varied conditions of climate, water depth, chemistry, and nutrient supply, and the floras can be indicative of these conditions. In the Tertiary Period, plant communities of mires were also highly diverse and specialized (especially as compared with those of the Carboniferous). The dominant species in some Paleocene mire floras were gymnosperms, but continuing a trend begun in Late Cretaceous time, angiosperms became increasingly prominent through the Tertiary. The diverse: angiosperm-dominated mire floras produced coals that vary significantly in facies and hence in quality. Such contrasts are evident in contemporaneous coals from different paleolatitudes, as well as among, coals of different ages within the Tertiary, as exemplified by selected deposits in the western United. States. The palynofloras of these coals reflect the floristic composition of the plant communities of the ancient mires.

International Journal of Coal Geology↗

Petrography, geochemistry, and depositional setting of the San Pedro and Santo Tomas coal zones: Anomalous algae-rich coals in the middle part of the Claiborne Group (Eocene) of Webb County, Texas

Two coal zones, the San Pedro and the overlying Santo Tomas, are present for nearly 35 km in outcrop, surface and underground mines, and shallow drill holes along the strike of the middle part of the Claiborne Group (Eocene) in Webb County, Texas. A sandstone-dominated interval of 25 to 35 m separates the two coal zones, which range up to 3 m in thickness. Each coal zone contains carbonaceous shales, thin (<0.75 m) impure coal beds, and thin (<0.85 m) but commercially significant nonbanded coal beds. The nonbanded coals are different from other Tertiary coals of the Gulf of Mexico Coastal Plain: unlike lignites that are typical of the older Wilcox Group (Paleocene-Eocene) and younger Jackson Group (Eocene), nonbanded coals of the Claiborne Group have high vitrinite-reflectance values (0.53 R max ) and high calorific yields (average 6670 kcal/kg or 12,000 Btu, dry basis). The coals are weakly agglomerating (free-swelling index is 1.5–2.0) and have an apparent rank of high-volatile bituminous. The coal-bearing portion of the middle Claiborne Group in the Rio Grande area represents a fining-upward transition from sandstone-dominated, marine-influenced, lower delta plain depositional environments to more inland, mudstone-rich, predominantly freshwater deltaic settings. Discontinuities within the San Pedro coal zone are attributed mainly to the influence of contemporaneous deposition of distributary mouth-bar sand bodies. The less variable nature of the Santo Tomas coal zone reflects its origin in the upper part of an interlobe basin that received only minor clastic influx. Petrographic attributes of the nonbanded coals indicate that they formed subaqueously in fresh to possibly brackish waters. A highly degraded groundmass composed of eugelinite is the main petrographic component (approximately 71%, mineral-matter-free basis). An enriched liptinite fraction (approximately 23%) probably accounts for unusually high calorific values. There is negligible inertinite. Petrographic study of polished blocks indicates that approximately 10 percent of the nonbanded coal from both coal zones is composed of green algae fructifications, which also occur in clastic rocks of the coal-bearing interval. Such algal material cannot be identified or quantified by conventional coal petrographic techniques that utilize particle pellets or by palynological analyses that include acid preparation.

International Journal of Coal Geology↗

Depositional controls on coal distribution and quality in the Eocene Brunner Coal Measures, Buller Coalfield, South Island, New Zealand

The Buller Coalfield on the West Coast of the South Island, New Zealand, contains the Eocene Brunner Coal Measures. The coal measures unconformably overlie Paleozoic-Cretaceous basement rocks and are conformably overlain by, and laterally interfinger with, the Eocene marine Kaiata Formation. This study examines the lithofacies frameworks of the coal measures in order to interpret their depositional environments. The lower part of the coal measures is dominated by conglomeratic lithofacies that rest on a basal erosional surface and thicken in paleovalleys incised into an undulating peneplain surface. These lithofacies are overlain by sandstone, mudstone and organic-rich lithofacies of the upper part of the coal measures. The main coal seam of the organic-rich lithofacies is thick (10-20 m), extensive, locally split, and locally absent. This seam and associated coal seams in the Buller Coalfield are of low- to high-volatile bituminous rank (vitrinite reflectance between 0.65% and 1.75%). The main seam contains a variable percentage of ash and sulphur. These values are related to the thickening and areal distribution of the seam, which in turn, were controlled by the nature of clastic deposition and peat-forming mire systems, marine transgression and local tidal incursion. The conglomeratic lithofacies represent deposits of trunk and tributary braided streams that rapidly aggraded incised paleovalleys during sea-level stillstands. The main seam represents a deposit of raised mires that initially developed as topogenous mires on abandoned margins of inactive braidbelts. Peat accumulated in mires as a response to a rise in the water table, probably initially due to gradual sea-level rise and climate, and the resulting raised topography served as protection from floods. The upper part of the coal measures consists of sandstone lithofacies of flu vial origin and bioturbated sandstone, mudstone and organic-rich lithofacies, which represent deposits of paralic (deltaic, barrier shoreface, tidal and mire) and marine environments. The fluvial sandstone lithofacies accumulated in channels during a sea-level stillstand. The channels were infilled by coeval braided and meandering streams prior to transgression. Continued transgression, ranging from tidal channel-estuarine incursions to widespread but uneven paleoshoreline encroachment, accompanied by moderate basin subsidence, is marked by a stacked, back-stepping geometry of bioturbated sandstone and marine mudstone lithofacies. Final retrogradation (sea-level highstand) is marked by backfilling of estuaries and by rapid landward deposition of the marine Kaiata Formation in the late Eocene.

International Journal of Coal Geology↗

Origin and significance of high nickel and chromium concentrations in pliocene lignite of the Kosovo Basin, Serbia

Trace element data from 59 Pliocene lignite cores from the lignite field in the Kosovo Basin, southern Serbia, show localized enrichment of Ni and Cr (33-304 ppm and 8-176 ppm, respectively, whole-coal basis). Concentrations of both elements decrease from the western and southern boundaries of the lignite field. Low-temperature ash and polished coal pellets of selected bench and whole-coal samples were analyzed by X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray analyses. These analyses show that most of the Ni and Cr are incorporated in detrital and, to a lesser degree, in authigenic minerals. The Ni- and Cr-bearing detrital minerals include oxides, chromites, serpentine-group minerals and rare mixed-layer clays. Possible authigenic minerals include Ni-Fe sulfates and sulfides. Analyses of three lignite samples by a supercritical fluid extraction technique indicate that some (1-11%) of the Ni is organically bound. Ni- and Cr-bearing oxides, mixed-layer clays, chromites and serpentine-group minerals were also identified in weathered and fresh samples of laterite developed on serpentinized Paleozoic peridotite at the nearby Glavica and C??ikatovo Ni mines. These mines are located along the western and northwestern rim, respectively, of the Kosovo Basin, where Ni contents are highest. The detrital Ni- and Cr-bearing minerals identified in lignite samples from the western part of the Kosovo Basin may have been transported into the paleoswamp by rivers that drained the two Paleocene laterites. Some Ni may have been transported directly into the paleoswamp in solution or, alternatively, Ni may have been leached from detrital minerals by acidic peat water and adsorbed onto organic matter and included into authigenic mineral phases. No minable source of Ni and Cr is known in the southern part of the lignite field; however, the mineral and chemical data from the lignite and associated rocks suggest that such a source area may exist.

International Journal of Coal Geology↗

Characterizing coal beds in western Kentucky with the Al-La-Sc coherent triad

Cyclic sedimentation and lateral facies changes make coal bed correlations inconclusive and difficult. This uncertainty can be further complicated if a coal basin has been structurally deformed. Coal macerals can be studied to indicate the nature and degree of coalification. Their use in coal bed correlation, however, is limited. Most of the trace elements and their ratios that have been studied show significant within-bed lateral and stratigraphic variations, and thus are not effective in correlating coal beds regionally. Geochemically coherent groups of elements, such as rare earth elements (REE) and platinum group elements (PGE), appear to be highly differentiated in coal-forming environments. Geochemical coherent elemental triads appear to be useful for coal bed identification or fingerprinting. The best triad which was demonstrated to be effective in coal bed characterization in western Kentucky, is that of Al, La and Sc. These three elements are highly correlated with one another and they can be determined accurately and simultaneously with instrumental neutron activation analysis (INAA). The elemental triad Al-La-Sc is used to identify and fingerprint three key coal beds in western Kentucky: the Springfield (western Kentucky No. 9), the Davis (western Kentucky No. 6), and the Mining City and Dawson Springs are both considered to be the No. 4 coal bed in western Kentucky). Four distinct groupings can be recognized by use of the Al-La-Sc triad. The Dawson Springs coals have the highest Al/(La + Sc) ratios, followed by the Springfield, the Davis and the Mining City. The Mining City coal bed generally has the highest La/Sc ratio. However, the Dawson Springs is not correlated with the Mining City using the triad analysis, even though they have reportedly similar stratigraphic positions in the western Kentucky coal basin. The Al-La-Sc triad appears to be effective in discriminating between the Springfield and the Davis coal beds throughout the entire Illinois Basin. Furthermore, the range of concentration variation of the AL-La-Sc triad suggests individual groupings of the No. 4 coal in western Kentucky. In addition to characterizing these coal beds, the Al-La-Sc triad may be used to confirm stratigraphic correlations.

International Journal of Coal Geology↗

Coal facies studies in the eastern United States

Coals in the eastern United States (east of the Mississippi River) have been the subject of a number of coal facies studies, going back to the 19th century. Such studies would not necessarily fall within a strict modern classification of coal facies studies, but if a study encompassed some aspects of paleobotany, palynology, petrology, geochemistry, or sedimentology, we assumed that some data and interpretations may be of use in evaluations of the facies. References are presented, as a guide for further research, with annotation in the tables. ?? 2004 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

Functional group and individual maceral chemistry of high volatile bituminous coals from southern Indiana: Controls on coking

The individual maceral chemistries of two Pennsylvanian, high volatile bituminous coals, the Danville Coal Member (Dugger Formation, R o=0.55%) and the Lower Block Coal Member (Brazil Formation, R o=0.56%) of Indiana, were investigated using electron microprobe and Fourier Transform Infrared Spectrometry (FTIR) techniques, with the purpose of understanding differences in their coking behavior. Microprobe results reveal that carbon contents are highest in inertinite and sporinite, followed by desmocollinite and telocollinite. Oxygen and organic nitrogen are most abundant in telocollinite and desmocollinite; sporinite and inertinite contain lesser amounts of these two elements. Organic sulfur contents are highest in sporinite, lowest in inertinite, and intermediate in desmocollinite and telocollinite. Vitrinites within the Danville and Lower Block coals are very similar in elemental composition, while Lower Block inertinites and sporinites have higher carbon, lower oxygen, and sulfur contents which, when combined with the inertinite-and sporinite-rich composition of the Lower Block seam, strongly influences its whole coal chemistry. Fourier transform infrared spectrometry revealed greater aromatic hydrogen in the Lower Block coal, along with higher CH2/CH3 ratios, which suggest that liptinites contribute considerable amounts of long-chain, unbranched aliphatics to the overall kerogen composition of the Lower Block coal. Long-chain, unbranched aliphatics crack at higher temperatures, producing tar and oily byproducts during coking; these may help increase Lower Block plasticity. Electron microprobe and FTIR results indicate that individual maceral chemistries, combined with the maceral composition of the seam, are the primary control of better coking properties of the Lower Block coal. ?? 2003 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

Potential health impacts of burning coal beds and waste banks

Uncontrolled release of pollutants from burning coal beds and waste banks presents potential environmental and human health hazards. On a global scale, the emissions of large volumes of greenhouse gases from burning coal beds may contribute to climate change that alters ecosystems and patterns of disease occurrence. On regional and local scales, the emissions from burning coal beds and waste banks of acidic gases, particulates, organic compounds, and trace elements can contribute to a range of respiratory and other human health problems. Although there are few published reports of health problems caused by these emissions, the potential for problems can be significant. In India, large numbers of people have been displaced from their homes because of health problems caused by emissions from burning coal beds. Volatile elements such as arsenic, fluorine, mercury, and selenium are commonly enriched in coal deposits. Burning coal beds can volatilize these elements, which then can be inhaled, or adsorbed on crops and foods, taken up by livestock or bioaccumulated in birds and fish. Some of these elements can condense on dust particles that can be inhaled or ingested. In addition, selenium, arsenic, lead, tin, bismuth, fluorine, and other elements condense where the hot gaseous emissions come in contact with ambient air, forming mats of concentrated efflorescent minerals on the surface of the ground. These mats can be leached by rainwater and washed into local water bodies providing other potential routes of exposure. Although there are little data linking burning coal beds and waste banks to known health problems, a possibly analogous situation exists in rural China where mineralized coal burned in a residential environment has caused widespread and severe health problems such as fluorosis and arseniasis. ?? 2004 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

Evaluation of coalbed gas potential of the Seelyville Coal Member, Indiana, USA

The Seelyville Coal Member of the Linton Formation in Indiana potentially contains 0.03 trillion m3 (1.1 TCF) of coalbed gas. The gas content determined by canister desorption technique ranges from 0.5 to 5.7 cm3/g on dry ash free basis (15.4 to 182.2 scf/ton). The controls on gas content distribution are complex, and cannot be explained by the coal rank alone. Ash content and the lithology of the overlying strata, among other factors, may influence this distribution. ?? 2004 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

From in-situ coal to fly ash: A study of coal mines and power plants from Indiana

This paper presents data on the properties of coal and fly ash from two coal mines and two power plants that burn single-source coal from two mines in Indiana. One mine is in the low-sulfur (<1%) Danville Coal Member of the Dugger Formation (Pennsylvanian) and the other mines the high-sulfur (>5%) Springfield Coal Member of the Petersburg Formation (Pennsylvanian). Both seams have comparable ash contents (???11%). Coals sampled at the mines (both raw and washed fractions) were analyzed for proximate/ultimate/sulfur forms/heating value, major oxides, trace elements and petrographic composition. The properties of fly ash from these coals reflect the properties of the feed coal, as well as local combustion and post-combustion conditions. Sulfur and spinel content, and As, Pb and Zn concentrations of the fly ash are the parameters that most closely reflect the properties of the source coal. ?? 2004 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

Modes of occurrence of mercury and other trace elements in coals from the warrior field, Black Warrior Basin, Northwestern Alabama

The mineralogic residence and abundance of trace metals is an important environmental issue. Data from the USGS coal quality database show that potentially toxic elements, including Hg, As, Mo, Se, Cu, and Tl are enriched in a subset of coal samples in the Black Warrior Basin of Alabama, USA. Although the coal as-mined typically is low in these elements, localized enrichments occur in high-pyrite coals and near faults. Microscopic analyses demonstrate that the residence of these elements is dominantly in a late-stage pyrite associated with structurally disrupted coal. Further, our data suggest addition of Hg to the coal matrix as well. The source of these trace elements was hydrothermal fluids driven into the Black Warrior Basin by Alleghanian age tectonism. ?? 2004 Published by Elsevier B.V.

International Journal of Coal Geology↗

Application of SAXS and SANS in evaluation of porosity, pore size distribution and surface area of coal

This paper discusses the applicability of small angle X-ray scattering (SAXS) and small angle neutron scattering (SANS) techniques for determining the porosity, pore size distribution and internal specific surface area in coals. The method is noninvasive, fast, inexpensive and does not require complex sample preparation. It uses coal grains of about 0.8 mm size mounted in standard pellets as used for petrographic studies. Assuming spherical pore geometry, the scattering data are converted into the pore size distribution in the size range 1 nm (10 A??) to 20 ??m (200,000 A??) in diameter, accounting for both open and closed pores. FTIR as well as SAXS and SANS data for seven samples of oriented whole coals and corresponding pellets with vitrinite reflectance (Ro) values in the range 0.55% to 5.15% are presented and analyzed. Our results demonstrate that pellets adequately represent the average microstructure of coal samples. The scattering data have been used to calculate the maximum surface area available for methane adsorption. Total porosity as percentage of sample volume is calculated and compared with worldwide trends. By demonstrating the applicability of SAXS and SANS techniques to determine the porosity, pore size distribution and surface area in coals, we provide a new and efficient tool, which can be used for any type of coal sample, from a thin slice to a representative sample of a thick seam. ?? 2004 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗