USGS Science⌕ Search

SEARCH · USGS Science

Results for “American Geologist”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS1981

Upper Oligocene evaporites in basin fill of Sevier Desert region, western Utah

The basin fill beneath the Sevier Desert of western Utah contains evaporites that were deposited in a broad closed basin. All of the basin fill penetrated by the Gulf Oil 1 Gronning contains abundant volcanic detritus and its alteration products of Cenozoic age. Fission-track dating of tuffaceous sandstone yields ages of 26-28 m.y. Fossil pollen from mudstone in the evaporite-bearing strata includes forms no older than late Oligocene, in good agreement with the fission-track ages. Thus the age of evaporites is late Oligocene and younger. Anhydrite is present throughout approximately 900m of volcaniclastic rocks in the lower part of the section cut by the Gulf hole. Fossil pollen are indicative of an arid to semiarid flora.-from Authors

Utah↗
USGS1997

Sequence stratigraphic distribution of coaly rocks: Fundamental controls and paralic examples

Significant volumes of terrigenous organic matter can be preserved to form coals only when and where the overall increase in accommodation approximately equals the production rate of peat. Accommodation is a function of subsidence and base level. For mires, base level is very specifically the groundwater table. In paralic settings, the groundwater table is strongly controlled by sea level and the precipitation/evaporation ratio. Peat accumulates over a range of rates, but always with a definite maximum rate set by original organic productivity and space available below depositional base level (groundwater table). Below a threshold accommodation rate (nonzero), no continuous peats accumulate, due to falling or low groundwater table, sedimentary bypass, and extensive erosion by fluvial channels. This is typical of upper highstand, lowstand fan, and basal lowstand-wedge systems tracts. Higher accommodation rates provide relatively stable conditions with rising groundwater tables. Mires initiate and thrive, quickly filling local accommodation vertically and expanding laterally, favoring accumulation of laterally continuous coals in paralic zones within both middle lowstand and middle highstand systems tracts. If the accommodation increase balances or slightly exceeds organic productivity, mires accumulate peat vertically, yielding thicker, more isolated coals most likely during of late lowstand-early transgressive and late transgressive-early highstand periods. At very large accommodation increases, mires are stressed and eventually inundated by clastics or standing water (as in middle transgressive systems tracts). These relations should be valid for mires in all settings, including alluvial, lake plain, and paralic. The tie to sea level in paralic zones depends on local subsidence, sediment supply, and groundwater regimes. These concepts are also useful for investigating the distribution of seal and reservoir facies in nonmarine settings.

American Association of Petroleum Geologists Bulle↗
USGS1997

Relationships among in-situ stress, fractures and faults, and fluid flow: Monterey formation, Santa Maria basin, California

We used borehole televiewer (BHTV) data from four wells within the onshore and offshore Santa Maria basin, California, to investigate the relationships among fracture distribution, orientation, and variation with depth and in-situ stress. Our analysis of stress-induced well-bore breakouts shows a uniform northeast maximum horizontal stress (S H max ) orientation in each well. This direction is consistent with the S H max direction determined from well-bore breakouts in other wells in this region, the northwest trend of active fold axes, and kinematic inversion of nearby earthquake focal plane mechanisms.

California↗
USGS1989

Kinky vitrinite reflectance well profiles: Evidence of paleopore pressure in low-permeability, gas-bearing sequences in Rocky Mountain foreland basins

Vitrinite reflectance (R m ) profiles of wells drilled in abnormally pressured, low-permeability gas-bearing sequences in Rocky Mountain foreland basins are commonly nonlinear with two or more nonparallel segments. These kinky profiles are most likely due to perturbations of the thermal gradient caused by contrasting heat transfer processes associated with the development of abnormally high pressures. We interpret the intersection of the shallow and intermediate R m segments to mark the approximate original boundary between normal-pressured, water-bearing rocks and underlying overpressured gas- and water-bearing rocks. The intersection of the intermediate and deep R m segments marks the approximate original boundary between overpressured gas- nd water-bearing rocks and underlying overpressured gas-bearing rocks. However, because overpressuring is a transient condition that eventually evolves into normal pressuring or underpressuring, these intersections may not coincide with the present top of abnormal pressuring. These segmented R m profiles occur in several Rocky Mountain basins of the United States and Canada.

Alberta, Colorado, Wyoming↗
USGS1989

Eustatic and tectonic controls on deposition of hybrid siliciclastic/carbonate basinal cycles: Discussion with examples

Changes in sea level represent one of the dominant controls on basinal sedimentation adjacent to mixed carbonate siliciclastic sediment-source areas. Sedimentary responses to sea level change of the siliciclastic and carbonate components of these hybrid systems commonly result in deposition of alternating siliciclastic and shelf-derived carbonate basinal deposits. Such deposition is particularly pronounced adjacent to carbonate platforms, where alternate immersion/exposure of the flat platform top results in carbonate highstand deposition and siliciclastic lowstand deposition. In contrast, small to moderate-amplitude sea level drops in distally steepened ramp settings may expose only the inner part of the gently sloping shelf, resulting in lowstand deposition of mixed sil ciclastic/allodapic (FOOTNOTE 3) carbonate sediments. Along active margins, tectonic uplift and subsidence of sediment-source areas act as additional major controls on deposition of siliciclastic/carbonate basinal cycles. Two of the most important tectonic effects are (1) uplift of siliciclastic sediment-source areas, resulting in increased erosion and swamping of carbonate shelf sources and (2) exposure or immersion of shelf-carbonate sediment-source areas due to vertical tectonic movements. Most published seismic-stratigraphic studies of sea level control on deep-sea sedimentation focus on lowstand deposition of siliciclastic sediment and commonly neglect the contribution of allodapic carbonate sediment deposited during sea level highstands. However, the examples discussed in this paper indicate that highstand carbonate deposits may make up a significant proportion of many hybrid carbonate/siliciclastic basinal sequences.

American Association of Petroleum Geologists Bulle↗
USGS1997

Jonah field, Sublette County, Wyoming: Gas production from overpressured Upper Cretaceous Lance sandstones of the Green River basin

Jonah field, located in the northwestern Green River basin, Wyoming, produces gas from overpressured fluvial channel sandstones of the Upper Cretaceous Lance Formation. Reservoirs exist in isolated and amalgamated channel facies 10-100 ft (3-30 m) thick and 150-4000 ft (45-1210 m) wide, deposited by meandering and braided streams. Compositional and paleocurrent studies indicate these streams flowed eastward and had their source area in highlands associated with the Wyoming-Idaho thrust belt to the west. Productive sandstones at Jonah have been divided into five pay intervals, only one of which (Jonah interval) displays continuity across most of the field. Porosities in clean, productive sandstones range from 8 to 12%, with core permeabilities of .01-0.9 md (millidarcys) and in-situ permeabilities as low as 3-20 µ d (microdarcys), as determined by pressure buildup analyses. Structurally, the field is bounded by faults that have partly controlled the level of overpressuring. This level is 2500 ft (758 m) higher at Jonah field than in surrounding parts of the basin, extending to the top part of the Lance Formation. The field was discovered in 1975, but only in the 1990s did the area become fully commercial, due to improvements in fracture stimulation techniques. Recent advances in this area have further increased recoverable reserves and serve as a potential example for future development of tight gas sands elsewhere in the Rocky Mountain region.

Wyoming↗
USGS1970

Role of gravity, temperature gradients, and ion exchange media in the formation of fossil brines

Calculations show that gravitational settling of ions in an isothermal sediment column could produce increases of equilibrium concentrations in pore waters ranging from 1 percent per 100 m depth for chloride to 4 percent per 100 m depth for strontium. The migration of ions in a thermal gradient (Soret effect) would cause minor salt enrichment upward toward the colder pole, but the presence of cation-exchanging particles such as clays would reverse this tendency and cause pumping of salt downward. A model calculation using literature data for the thermal potentials suggests that about 5-percent enrichment in Cl per 100 m depth may occur under steady-state conditions. These mechanisms do not explain the greater enrichments commonly found in subsurface brines, but may modify salt distributions due to other phenomena.

American Association of Petroleum Geologists Bulle↗
USGS1970

Foraminiferal zonation and carbonate facies of Carboniferous (Mississippian and Pennsylvanian) Lisburne group, central and eastern Brooks range, Arctic Alaska

The Lisburne Group carbonate rocks of the central and eastern Brooks Range contain foraminiferal assemblages assigned to zones of late Tournaisian (Osage) to early Moscovian (Atoka) age. Representatives of both Eurasiatic and American cratonic microfaunas permit correlation with the original Carboniferous type sections in western Europe as well as with the standard Mississippian and Pennsylvanian sequences in the Mid-Continent region of North America. Correlation anomalies in the lower part of the sequence are discussed.

Alaska↗
USGS2002

Regional fluid flow as a factor in the thermal history of the Illinois basin: Constraints from fluid inclusions and the maturity of Pennsylvanian coals

Vitrinite reflectance measurements on Pennsylvanian coals in the Illinois basin indicate significantly higher thermal maturity than can be explained by present-day burial depths. An interval of additional sedimentary section, now removed by erosion, has been suggested to account for the discrepancy. Although burial could indeed account for the observed maturity levels of organic matter, fluid-inclusion temperatures provide a stringent additional constraint. In this article, we combine measurements of coal maturity with fluid-inclusion temperatures from three sites to constrain the basin's thermal and burial history: the Fluorspar district at the Illinois basin's southern margin, the Upper Mississippi Valley zinc district at the basin's northern margin, and a north-central location. Two-dimensional numerical modeling of a north-south cross section through the basin tests scenarios both with and without regional fluid flow. Vitrinite reflectance values can be matched assuming burial by 1.8-2.8 km of southward-thickening additional, post-Pennsylvanian sedimentary section. In the central and northern Illinois basin, however, these burial depths and temperatures are not sufficient to account for the fluid-inclusion data. To account for both parameters with burial alone does not appear feasible. In contrast, our best hypothesis assumes a wedge of post-Pennsylvanian sediment-thickening southward to about 1.2 km and a brief period of magmatism in the Fluorspar district. Significant advective heat redistribution by northward regional fluid flow accounts for fluid-inclusion temperatures and coal maturities throughout the basin. The modeling results demonstrate the potential contribution of advective heat transport to the thermal history of the Illinois basin.

Illinois, Indiana, Kentucky↗
USGS2002

An upwelling model for the Phosphoria sea: A Permian, ocean-margin sea in the northwest United States

The Permian Phosphoria Formation, a petroleum source rock and world-class phosphate deposit, was deposited in an epicratonic successor basin on the western margin of North America. We calculate the seawater circulation in the basin during deposition of the lower ore zone in the Meade Peak Member from the accumulation rates of carbonate fluorapatite and trace elements. The model gives the exchange rate of water between the Phosphoria sea and the open ocean to the west in terms of an upwelling rate (84 m yr-1) and residence time (4.2 yr) of seawater in the basin. These hydrographic properties supported a mean rate of primary productivity of 0.87 g m-2 d-1 of carbon in the uppermost few tens of meters of the water column (the photic zone) and denitrifying redox conditions in the bottom water (below approximately 150 m depth). High rain rates, onto the sea floor, of the organic matter that hosted the phosphate and several trace elements contributed to the accumulation of phosphorite, chert, and black shales and mudstones. Evaporation in the Goose Egg basin to the east of the Phosphoria basin ensured the import of surface seawater from the Phosphoria sea. Budgets of water, salt, phosphate, and oxygen, plus the minor accumulation of the biomarker gammacerane, show that exchange of water between the two basins was limited, possibly by the shallow carbonate platform that separated the two basins.

Idaho, Montana, Utah, Wyoming↗
USGS2002

Unconventional shallow biogenic gas systems

Unconventional shallow biogenic gas falls into two distinct systems that have different attributes. Early-generation systems have blanketlike geometries, and gas generation begins soon after deposition of reservoir and source rocks. Late-generation systems have ringlike geometries, and long time intervals separate deposition of reservoir and source rocks from gas generation. For both types of systems, the gas is dominantly methane and is associated with source rocks that are not thermally mature. Early-generation biogenic gas systems are typified by production from low-permeability Cretaceous rocks in the northern Great Plains of Alberta, Saskatchewan, and Montana. The main area of production is on the southeastern margin of the Alberta basin and the northwestern margin of the Williston basin. The huge volume of Cretaceous rocks has a generalized regional pattern of thick, non-marine, coarse clastics to the west and thinner, finer grained marine lithologies to the east. Reservoir rocks in the lower part tend to be finer grained and have lower porosity and permeability than those in the upper part. Similarly, source beds in the units have higher values of total organic carbon. Patterns of erosion, deposition, deformation, and production in both the upper and lower units are related to the geometry of lineament-bounded basement blocks. Geochemical studies show that gas and coproduced water are in equilibrium and that the fluids are relatively old, namely, as much as 66 Ma. Other examples of early-generation systems include Cretaceous clastic reservoirs on the southwestern margin of Williston basin and chalks on the eastern margin of the Denver basin. Late-generation biogenic gas systems have as an archetype the Devonian Antrim Shale on the northern margin of the Michigan basin. Reservoir rocks are fractured, organic-rich black shales that also serve as source rocks. Although fractures are important for production, the relationships to specific geologic structures are not clear. Large quantities of water are coproduced with the gas, and geochemical data indicate that the water is fairly fresh and relatively young. Current thinking holds that biogenic gas was generated, and perhaps continues to be, when glacial meltwater descended into the plumbing system provided by fractures. Other examples of late-generation systems include the Devonian New Albany Shale on the eastern margin of the Illinois basin and the Tertiary coalbed methane production on the northwestern margin of the Powder River basin. Both types of biogenic gas systems have a similar resource development history. Initially, little technology is used, and gas is consumed locally; eventually, sweet spots are exploited, widespread unconventional reservoirs are developed, and transport of gas is interstate or international. However, drilling and completion techniques are very different between the two types of systems. Early-generation systems have water-sensitive reservoir rocks, and consequently water is avoided or minimized in drilling and completion. In contrast, water is an important constituent of late-generation systems; gas production is closely tied to dewatering the system during production. Existing production and resource estimates generally range from 10 to 100 tcf for both types of biogenic gas systems. Although both system types are examples of relatively continuous accumulations, the geologic frameworks constrain most-economic production to large geologic structures on the margins of basins. Shallow biogenic gas systems hold important resources to meet the increased domestic and international demands for natural gas.

American Association of Petroleum Geologists Bulle↗
USGS2002

Energy resource potential of natural gas hydrates

The discovery of large gas hydrate accumulations in terrestrial permafrost regions of the Arctic and beneath the sea along the outer continental margins of the world's oceans has heightened interest in gas hydrates as a possible energy resource. However, significant to potentially insurmountable technical issues must be resolved be fore gas hydrates can be considered a viable option for affordable supplies of natural gas. The combined information from Arctic gas hydrate studies shows that, in permafrost regions, gas hydrates may exist at subsurface depths ranging from about 130 to 2000 m. The presence of gas hydrates in offshore continental margins has been inferred mainly from anomalous seismic reflectors, known as bottom-simulating reflectors, that have been mapped at depths below the sea floor ranging from about 100 to 1100 m. Current estimates of the amount of gas in the world's marine and permafrost gas hydrate accumulations are in rough accord at about 20,000 trillion m 3 . Disagreements over fundamental issues such as the volume of gas stored within delineated gas hydrate accumulations and the concentration of gas hydrates within hydrate-bearing strata have demonstrated that we know little about gas hydrates. Recently, however, several countries, including Japan, India, and the United States, have launched ambitious national projects to further examine the resource potential of gas hydrates. These projects may help answer key questions dealing with the properties of gas hydrate reservoirs, the design of production systems, and, most important, the costs and economics of gas hydrate production.

American Association of Petroleum Geologists Bulle↗
USGS2002

Resource-assessment perspectives for unconventional gas systems

Concepts are described for assessing those unconventional gas systems that can also be defined as continous accumulations. Continuous gas accumulations exist more or less independently of the water column and do not owe their existence directly to the bouyancy of gas in water. They cannot be represented in terms of individual, countable fields or pools delineated by downdip water contacts. For these reasons, traditional resource-assessment methods based on estimating the sizes and numbers of undiscovered discrete fields cannot not be applied to continuous accumulations. Specialized assessment methods are required. Unconventional gas systems that are also continous accumulations include coalbed methane, basin-centered gas, so-called tight gas, fractured shale (and chalk) gas, and gas hydrates. Deep-basin and bacterial gas systems may or may not be continuous accumulations, depending on their geologic setting. Two basic resource-assessment approaches have been employed for continous accumulations. The first approach is based on estimates of gas in place. A volumetric estimate of total gas in place is commonly coupled with an overall recovery factor to narrow the assessment scope from a treatment of gas volumes residing in sedimentary strata to a prediction of potential additions to reserves. The second approach is based on the production performance of continous gas reservoirs, as shown empirically by wells and reservoir-simulation models. In these methods, production characteristics (as opposed to gas in place) are the foundation for forecasts of potential additions to reserves.

American Association of Petroleum Geologists Bulle↗
USGS1996

Structure, stratigraphy, and petroleum geology of the Little Plain basin, northwestern Hungary

The basement of the Little Plain (Kisalfold) basin is composed of two parts: an eastern part comprised of folded and overthrusted Triassic and Paleozoic rocks of the Pelso block (Transdanubian Central Range) compressed in the Early Cretaceous, and a western part consisting of stacked nappes of the Austroalpine zone of Paleozoic rocks, significantly metamorphosed during Cretaceous and later compression, overriding Jurassic oceanic rift-zone rocks of the Penninic zone. The evolution of the basin began in the late Karpatian-early Badenian (middle Miocene) when the eastern part of the basin began to open along conjugate sets of northeast- and northwest-trending normal faults. Neogene rocks in the study area, on the average, contain less than 0.5 wt. % total organic carbon (TOC) and, therefore, are not considered effective source rocks. Locally, however, where TOC values are as high as 3 wt. %, significant amounts of gas may have been generated and expelled. Although potential stratigraphic traps are numerous in the Neogene section, these potential traps must be downgraded because of the small amount of hydrocarbons discovered in structural traps to date. With the exception of the Cretaceous, the Mesozoic section has not been actively explored. Large anticlinal and overthrust structures involving pre-Cretaceous strata remain undrilled.

Little Plain basin↗
USGS1987

Seismic stratigraphy and facies of continental slope and rise seaward of Baltimore Canyon Trough

As part of a survey of the United States continental rise seaward of the northern Baltimore Canyon Trough, four major depositional sequences were mapped on a grid of 2,350 km of multichannel seismic reflection profiles. The sequences, which range in age from Jurassic (?) to Quaternary, record a gradual sedimentary buildup of fine-grained onlapping and slope-front fill. A broad wedge of Jurassic-age (?) sediment up to 5 km thick was deposited seaward of a conspicuous platform. During the Cretaceous, the slope-rise transition became much gentler, and sequences are more blanket-like because the declivity seaward of the platform was smoothed and filled by fine-grained clastic sediments and thin-bedded limestones. The main constructional phase for the continental rise was during the Cenozoic, when a thick (0.1-2.4 km) wedge formed seaward of the shelf edge in response to major fluctuations in sea level and erosion of the gentle, ancestral continental slope. The Cenozoic rise section can be subdivided into two main sequences separated by a conspicuous unconformity. The lower sequence is mostly a blanket (0.2-0.8 km thick) of Paleogene hemipelagic ooze and claystone. The sequence above the unconformity is a complex association of Neogene slump deposits, turbidites, hemipelagic clays, and channel fill that thickens seaward to 2.2 km under the middle continental rise. The final phase of rise construction was caused by widespread fluctuations in coastal onlap. These regressions resulted in deltaic outward-building on the shelf, extensive Pleistocene landward erosion of the slope, and the accumulation of a broad sedimentary apron on the rise.

American Association of Petroleum Geologists Bulle↗
USGS1987

Possible Late Middle Ordovician organic carbon isotope excursion: Evidence from Ordovician oils and hydrocarbon source rocks, mid-continent and east-central United States

Oils generated by Middle Ordovician rocks are found throughout the Mid-Continent and east-central regions of the United States. Gas chromatographic characteristics of these oils include a relatively high abundance of n-alkanes with carbon numbers less than 20, a strong predominance of odd-numbered n-alkanes between C 10 and C 20 , and relatively small amounts of branched and cyclic alkanes. Saturated and aromatic hydrocarbon fractions of 43 Ordovician oils from the Anadarko, Ardmore, Forest City, Illinois, Michigan, Salina-Sedgwick, and Williston basins and the Iowa shelf demonstrate a wide range in carbon isotope composition (^dgr 13 C sat = -24.9 ^pmil to -33.9 ^pmil, (^dgr 13 C arom = -24.3 ^pmil to -33.7 ^pmil). Saturated and aromatic hydrocarbons extracted from late Middle Ordovician shales (17 core samples) show ranges in ^dgr 13 C similar to that of the oils. The wide ranges in ^dgr 13 C for oils and rock extracts reflect a major, positive excursion(s) (6-9 per ^pmil) in organic matter ^dgr 13 C in late Middle Ordovician rocks. This excursion has at least a regional significance in that it can be documented in sections 480 mi (770 km) apart in south-central Kansas and eastern Iowa. The distance may be as much as 930 mi (1,500 km) if the carbon isotope variations observed in Michigan basin Ordovician oils and in organic matter from late Middle Ordovician rocks in southwestern Ontario are related to the same carbon isotope excursion. Organic-matter ^dgr 13 C in core samples from south-central Kansas and eastern Iowa is not directly related to variations in quantity or quality of organic matter, or maceral compositi n. The positive excursion in organic matter ^dgr 13 C is a possible result of increased organic matter productivity and/or preservation. The parallel shifts in organic and carbonate ^dgr 13 C in core samples from 1 E. M. Greene well, Washington County, Iowa, imply changes in the isotope composition of the ocean-atmosphere carbon reservoir. Differences in the magnitude of the carbon isotope shifts between organic matter (8.8 ^pmil) and carbonate (4.2 ^pmil) in this core suggest a decrease, either locally or regionally, in available dissolved CO 2 , possibly a result of high organic-matter productivity and/or limited circulation in the late Middle Ordovician seas.

American Association of Petroleum Geologists Bulle↗
USGS1988

Lateral fluid flow in a compacting sand-shale sequence: South Caspian basin

The South Caspian basin contains both sands and shales that have pore-fluid pressures substantially in excess of hydrostatic fluid pressure. Pore-pressure data from the South Caspian basin demonstrate that large differences in excess hydraulic head exist between sand and shale. The data indicate that sands are acting as drains for overlying and underlying compacting shales and that fluid flows laterally through the sand on a regional scale from the basin interior northward to points of discharge. The major driving force for the fluid movement is shale compaction. We present a first- order mathematical analysis in an effort to test if the permeability of the sands required to support a regional flow system is reasonable. The results of the analysis suggest regional sand permeabilities ranging from 1 to 30 md; a range that seems reasonable. This result supports the thesis that lateral fluid flow is occurring on a regional scale within the South Caspian basin. If vertical conduits for flow exist within the basin, they are sufficiently impermeable and do not provide a major outlet for the regional flow system. The lateral fluid flow within the sands implies that the stratigraphic sequence is divided into horizontal units that are hydraulically isolated from one another, a conclusion that has important implications for oil and gas migration.-Authors

South Caspian basin↗
USGS1989

Source of anomalous magnetization in an area of hydrocarbon potential: Petrologic evidence from the Jurassic Preuss Sandstone, Wyoming-Idaho thrust belt

The Jurassic Preuss Sandstone, which crops out in the central part of the Wyoming-Idaho thrust belt on trend with a hydrocarbon-producing region to the south, has been previously identified as the source of anomalous magnetization in the area. Elsewhere, anomalous magnetization in sedimentary rocks near hydrocarbon accumulations has been attributed to hydrocarbon-engendered magnetic minerals, but magnetization of the Preuss is controlled by detrital magnetite. Evidence of a detrital origin for magnetite includes (1) concentration of magnetite grains along laminations containing other heavy minerals, (2) the presence of exsolved ilmenite, hematite, and spinel in the magnetite grains, and (3) titanium contents typical of igneous-derived magnetite. That detrital magnetite is responsible for the anomalous magnetization in the Preuss is further indicated by the systematic eastward decrease in magnetite abundance corresponding to a similar eastward decrease in magnetic susceptibility and remanent magnetization of the unit. Petrologic and vitrinite reflectance studies indicate a complex low-temperature (<150°C or 302°F) diagenetic history for the Preuss. Nevertheless, preservation of detrital magnetite, the presence of diagenetically early ferric oxide minerals, and the absence of sulfide minerals all indicate that the Preuss has not experienced sulfidic-reducing conditions common in areas of hydrocarbon seepage. The marine carbon isotopic composition of calcite that cements most Preuss sandstones (^dgr13C values ranging from -2.47 to 1.48^pmil is evidence that carbonate diagenesis also was not influenced by hydrocarbons. The results of this multidisciplinary study of the Preuss underscore the importance of similar studies when evaluating the sources of aeromagnetic anomalies in areas of hydrocarbon potential.

Idaho, Utah, Wyoming↗