USGS Science⌕ Search

SEARCH · USGS Science

Results for “Snake”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources

Response of ground-water levels of flood control operations in three basins, south-eastern Florida

Three basins in southeastern Florida were investigated to determine the changes in ground-water levels and canal flows that occurred in response to operation of coastal water-control structures in each canal. All three basins are underlain by the Biscayne aquifer. They are, Snapper Creek Canal basin, where the Biscayne aquifer is of high permeability; the Snake Creek Canal basin, where the aquifer is of moderate permeability; and the Pompano-Cypress Canal basin, where the aquifer is of low permeability. In each basin, drainage is a function of permeability; thus, where the permeability of the aquifer is high, drainage is excellent. The coastal water-conrol structures are intended to afford flood protection in the three basins. In general the control operation criteria for flood control in newly developing areas in southeastern Florida do not provide adequate protection from flooding because of the time required for the aquifer to respond to changes in the controls. Adequate protection would require increasing the density of secondary drainage canals, but this could achieved only by reducing the quantity of water available for recharging those segments of the Biscayne aquifer adjacent to the canals. (Woodrad-USGS)

Florida↗

Medicine Lodge thrust system, east-central Idaho and southwest Montana

The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.

Idaho, Montana↗

Numerical modeling of subsurface radioactive solute transport from waste seepage ponds at the Idaho National Engineering Laboratory

Aqueous chemical and low-level radioactive effluents have been disposed to seepage ponds since 1952 at the Idaho National Engineering Laboratory. The solutions percolate toward the Snake River Plain aquifer (135 m below) through interlayered basalts and unconsolidated sediments and an extensive zone of ground water perched on a sedimentary layer about 40 m beneath the ponds. A three-segment numerical model was developed to simulate the system, including effects of convection, hydrodynamic dispersion, radioactive decay, and adsorption. The first segment uses an analytical solution to simulate transport from the ponds to the 25-m thick perched-water lens, assuming steady vertical flow through a 15-m long saturated homogeneous column. The second segment simulates two-dimensional horizontal transport in the perched-water body using finite-difference methods, assuming complete vertical mixing with vertical leakage from the bottom. The third segment of the model simulates vertical solute transport from the perched-water body toward the aquifer, by assuming unsaturated but steady water flow in a series of contiguous, nonhomogeneous independent vertical columns. The transport equation is solved by a "hop-scotch" finite-difference scheme for each column. Simulated hydraulics and solute migration patterns for all segments agree adequately with the available field data. The model can be used to project subsurface distributions of waste solutes under a variety of assumed conditions for the future. Although chloride and tritium reached the aquifer several years ago, the model analysis suggests that the more easily sorbed solutes, such as cesium-137 and strontium-90, would not reach the aquifer in detectable concentrations within 150 years for the conditions assumed. However, a change in chemistry or hydraulic conditions could increase the mobility of adsorbed waste solutes. Such changes might result from changes in waste disposal practices and effluent chemistry, flooding from the Big Lost River, or future irrigation activity.

Idaho↗

Surface-water data for Idaho, 1971-75

Surface-water data collection began in Idaho in 1889 with the establishment of three gaging stations: Snake River at Eagle Rock (now Idaho Falls), Big Wood River near Hailey, and Bear River at Preston. Following passage of the National Reclamation Act of 1902, a notable increase in investigations of water resources began throughout the Western United States. Although Idaho enacted laws in 1903 to activate stream-gaging programs, it was no until 1909 that the State entered into a formal agreement with the U.S. Geological Survey from this work. Since that time, except for a hiatus from 1914-18, the Federal-State cooperative program of water-resources investigations has continued uninterrupted to the present.

Idaho↗

A wind powered, ground-water monitoring installation at a radioactive waste management site in Idaho

In 1971, four wells were drilled just outside a radioactive solid waste storage and disposal facility located on the Idaho National Engineering Laboratory in southeastern Idaho. This facility, the Radioactive Waste Management Complex (RWMC), has been in use since 1952. These wells serve several purposes: to study the geology and hydrology at the RWMC, to determine the potential for radioactive waste migration, and to obtain water samples to determine if waste products are migrating downward into the Snake River Plain aquifer. Special efforts are made to insure that surface contamination does not enter the wells by either water, wind, or contaminated equipment. A submersible pump and a continuous water-level measuring device were installed in each well. Permanent installation of this equipment allowed the well heads to be sealed while providing for collection of data from these wells. The water-level measuring device is a small diameter, differential-pressure, transducer probe. The transducer produces a variable-reluctance signal which is converted to an analog signal and recorded as the depth to water on a strip chart recorder. Windmill-charged storage batteries provide power for the water-level measuring system. This system is reliable, sensitive, and relatively maintenance free.

Idaho↗

Geologic factors pertinent to the proposed A. J. Wiley Hydroelectric Project No. 2845, Bliss, Idaho

The A.J. Wiley Hydroelectric Project is a proposal by the Idaho Power Company to develop hydroelectricity near Bliss, Idaho, by building a dam on the Snake River (fig. 1). The proposed dam would impound a narrow reservoir as deep as 85 feet in a free-flowing reach of the river that extends from the upper reach of water impounded by the Bliss Dam to the foot of the Lower Salmon Falls Dam, nearly 8 miles farther upstream. The proposed dam would be built in three sections: a spillway section and a powerhouse (intake) section to be constructed of concrete in the right-handed part, and an embankment section to be constructed as a zoned-fill of selected earth materials in the left-hand part. (Right and left are to be understood in the sense of looking downstream.) In August, 1979, the Idaho Power Company was granted a 3-year permit (Project No. 2845) by the Federal Energy Regulatory Commission (FERC) to make site investigations and environmental studies in the project area. A year later, on August 26, 1980, the company applied to FERC for a license to construct the project. On October 8, 1980, as explained in a letter by William W. Lindsay, Director of the Office of Electric Power Regulation, the company was given 90 days to correct certain deficiencies in the application. Because several of the deficiencies identified by Mr. Lindsay pertain to geologic aspects of the project, his letter is attached to this report as Appendix A. Hereafter in this report, the deficiencies listed by Mr. Lindsay are identified by the numerical entries in his letter. The Idaho Power Company is referred to as the applicant.

Idaho↗

A method of estimating flood-frequency parameters for streams in Idaho

Skew coefficients for the log-Pearson type III distribution are generalized on the basis of some similarity of floods in the Snake River basin and other parts of Idaho. Generalized skew coefficients aid in shaping flood-frequency curves because skew coefficients computed from gaging stations having relatively short periods of peak flow records can be unreliable. Generalized skew coefficients can be obtained for a gaging station from one of three maps in this report. The map to be used depends on whether (1) snowmelt floods are domiant (generally when more than 20 percent of the drainage area is above 6,000 feet altitude), (2) rainstorm floods are dominant (generally when the mean altitude is less than 3,000 feet), or (3) either snowmelt or rainstorm floods can be the annual miximum discharge. For the latter case, frequency curves constructed using separate arrays of each type of runoff can be combined into one curve, which, for some stations, is significantly different than the frequency curve constructed using only annual maximum discharges. For 269 gaging stations, flood-frequency curves that include the generalized skew coefficients in the computation of the log-Pearson type III equation tend to fit the data better than previous analyses. Frequency curves for ungaged sites can be derived by estimating three statistics of the log-Pearson type III distribution. The mean and standard deviation of logarithms of annual maximum discharges are estimated by regression equations that use basin characteristics as independent variables. Skew coefficient estimates are the generalized skews. The log-Pearson type III equation is then applied with the three estimated statistics to compute the discharge at selected exceedance probabilities. Standard errors at the 2-percent exceedance probability range from 41 to 90 percent. (USGS)

Idaho↗

Ground-water conditions in the eastern part of Michaud Flats, Fort Hall Indian Reservation, Idaho

The Michaud Flats study area occupies about 20 square miles on the Snake River Plain in southeastern Idaho: Ground-water resources are extensively developed for irrigation and industrial uses. The more productive wells are completed in the Pediment Gravel and the basalt flows of the Bighole Basalt and Starlight Formation and the sand and gravel of the Sunbeam Formation. A few shallow domestic wells are completed in the water-table aquifer in the Michaud Gravel. Historically, high levels of arsenic were observed in water from several wells completed in the shallow aquifer. In most wells and springs sampled during this study, levels of arsenic and other minor elements were within limits recommended by the U.S. Public Health Service. Heavy metal concentrations in one well completed in the shallow aquifer, and the concentration of arsenic exceeded the recommended limits. There is some evidence that arsenic, as well as several other minor elements, may occur in above-normal levels naturally in local ground water. Ground water used for irrigation generally has a low sodium-absorption ratio and can be used on almost all soils. All irrigation water sampled have a medium to high salinity hazard, and caution should be used when applying these waters on poorly drained soils. (USGS)

Open-File Report↗

Radionuclides in ground water at the Idaho National Engineering Laboratory, Idaho

Sampling for radionuclides in groundwater was conducted at the Idaho National Engineering Laboratory during September to November 5 1987. Water samples from 80 wells that obtain water from the Snake River Plain aquifer and 1 well that obtains water from a shallow, discontinuous perched-water body at the Radioactive Waste Management Complex were collected and analyzed for tritium, strontium-90, plutonium-238, plutonium-239, -240 (undivided), americium-241, cesium-137, cobalt-60, and potassium-40--a naturally occurring radionuclide. The groundwater samples were analyzed at the Idaho National Engineering Laboratory in Idaho. Tritium and strontium-90 concentrations ranged from below the reporting level to 80.6 +/-0.000005 and 193 +/-5x10 to the minus eight micrograms Ci/ml, respectively. Water from a disposal well at Test Area North--which has not been used to dispose of waste water since September 1972--contained 122 +/-9x10 to the minus eleven micrograms Ci/ml of plutonium-238, 500 +/-20x10 to the minus eleven of plutonium-239, -240 (undivided), 21 +/-4x10 to the minus eleven micrograms Ci/ml of americium-241, and 750 +/-20x10 to the minus eight micrograms Ci/ml cesium-137; the presence of these radionuclides was verified by resampling and reanalysis. The disposal well had 8.9 +/-0.0000009 micrograms Ci/ml of cobalt-60 on October 28, 1987, but cobalt-60 was not detected when the well was resampled on January 11, 1988. Potassium-40 concentrations were less than the reporting level in all wells. (USGS)

Open-File Report↗

Purgeable organic compounds in ground water at the Idaho National Engineering Laboratory, Idaho; 1988 and 1989

Groundwater samples from 38 wells at the Idaho National Engineering Laboratory were analyzed for 36 purgeable organic compounds in 1988-89. Thirty-six of the wells obtain water from the Snake River Plain aquifer and were equipped with dedicated or portable pumps. Water samples from one well that obtains water from the aquifer and one that obtains water from a perched groundwater zone were collected using a thief sampler. Analyses of water from 22 wells indicated the aquifer locally contained detectable concentrations of at least 1 of 19 purgeable organic compounds, mainly carbon tetrachloride, 1,1,1-trichloroethane, and trichloroethylene. Except for five wells, the maximum concentration of a specific compound in groundwater was 6.4 microgram/L or less; concentrations of most compounds were less than 0.2 microgram/L. Water from four wells at and near the Test Area North contained from 44 to 29, 000 micrograms/L of trichloroethylene. Water from a well that obtains water from a discontinuous perched groundwater zone at the Radioactive Waste Management Complex contained 1,400 micrograms/L of carbon tetrachloride, 940 micrograms/L of chloroform, 250 micrograms/L of 1,1,1- trichloroethane, and 1,100 micrograms/L trichloroethylene. Selected purgeable organic compounds, such as total xylene and methylene chloride, were detected in some groundwater samples and some blank samples consisting of boiled deionized water. Their presence in the blank samples suggest the compounds could have been inadvertently introduced into the groundwater sampled during or subsequent to collection. (USGS)

Open-File Report↗

Geohydrologic and chemical data from wells in the Mud Lake area, eastern Idaho, 1988-91

Well information, results of test drilling, water-level measurements in observation wells, and chemical and isotopic constituents in ground-water samples were among the data collected as part of a study of the availability of ground water from the eastern Snake River Plain aquifer system in the Mud Lake area of eastern Idaho. Data from about 1,200 wells were stored in the National Water Information System ground-water data base. Test holes were drilled at eight sites. Water levels were measured in 594 wells in April or May 1989 and in 470 wells in August or September 1989. Hydrographs of water levels were constructed for 99 observation wells. Water samples were collected from nine irrigation wells and were analyzed for nutrients, common dissolved ions, stable isotopes of hydrogen and oxygen, trace elements, herbicides, insecticides, and polychlorinated compounds.

Idaho↗

Concentration of 23 trace elements in ground water and surface water at and near the Idaho National Engineering Laboratory, Idaho, 1988-91

Water samples from 167 wells and 12 surface-water sites at and near the Idaho National Engineering Laboratory were analyzed for a suite of as many as 23 trace elements in 1988-91. The samples were collected and analyzed as a continuation of a water-quality program initiated in 1987 and as part of studies conducted by the U.S. Geological Survey. Water samples were collected from 148 wells completed in the Snake River Plain aquifer, 18 wells completed in discontinuous deep perched-water zones, and 1 well completed in an alluvial aquifer. Samples were collected from these wells using dedicated or portable pumps. Grab samples were collected at surface-water sites. Data indicated that water locally contained detectable concentra- tions of aluminum, arsenic, barium, beryllium, bromide, cadmium, chromium, hexavalent chromium, cobalt, copper, iron fluoride, lead, lithium, manganese, mercury, nickel, selenium, silver, strontium, vanadium, and zinc. Molybdenum and thallium were not detected. Except for chromium, the concentrations of trace elements from all sites were less than the Maximum Contaminant Levels for drinking water established by the U.S. Environmental Protection Agency. Chromium equaled or exceeded the Maximum Contaminant Level at 12 water-quality monitoring wells. (USGS)

Open-File Report↗

Water-resources activities of the U.S. Geological Survey in Idaho, fiscal years 1989-90

Twenty-five funded projects were conducted by the Water Resources Division of the U.S. Geological Survey, Idaho District, during fiscal years 1989-90. These projects were done in cooperation with 13 State and local agencies, 11 other Federal agencies, and 1 International Commission. State and local cooperative funding amounted to about $1.1 million in fiscal year 1989 and $1 million in fiscal year 1990; Federal funding amounted to about $3.6 million in fiscal year 1989 and about $4.4 million in fiscal year 1990. In conducting its fiscal year 1989-90 activities, the Idaho District employed a total of 83 employees. Projects other than continuing programs for collection of hydrologic data included establishment of statewide surface-water and groundwater-quality monitoring networks; study of effects of irrigation drainage; development of a hydraulic model to determine water-surface elevations for decreased discharges of the Snake River at Swan Falls Dam; evaluation of subsurface waste disposal; delineation of agricultural areas of the State with high concentrations of dissolved nitrogen; evaluation of water use and its effect on groundwater levels and thermal waters in specific areas of the State; and determination of the cause or causes of rapidly decreasing hot-spring discharges along Hot Creek. (USGS)

Open-File Report↗

Radionuclides, stable isotopes, inorganic constituents, and organic compounds in water from selected wells and springs from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area, Idaho, 1993

The U.S. Geological Survey and the Idaho Department of Water Resources, in response to a request from the U.S. Department of Energy, sampled 19 sites as part of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area. Water samples were collected and analyzed for selected radionuclides, stable isotopes, inorganic constituents, and organic compounds. The samples were collected from seven irrigation wells, four domestic wells, two springs, one stock well, three dairy wells, one observation well, and one commercial well. Two quality assurance samples also were collected and analyzed. None of the radionuclides, inorganic constituents, or organic compounds exceeded the established maximum contaminant levels for drinking water. Most of the radionuclide and inorganic constituent concen- trations exceeded their respective laboratory reporting levels. All samples analyzed for surfactants and dissolved organic carbon had concentrations that exceeded their reporting level. Ethylbenzene concentrations exceeded the reporting level in one water sample.

Open-File Report↗

The thrust belt in Southwest Montana and east-central Idaho

The leading edge of the Cordilleran fold and thrust in southwest Montana appears to be a continuation of the edge of the Wyoming thrust belt, projected northward beneath the Snake River Plain. Trces of the thrust faults that form the leading edge of the thrust belts are mostly concealed, but stratigraphic and structural evidence suggests that the belt enters Montana near the middle of the Centennial Mountains, continues west along the Red Rock River valley, and swings north into the Highland Mountains near Butte. The thrust belt in southwest Montana and east-central Idaho includes at least two major plates -- the Medicine Lodge and Grasshopper thrust plates -- each of which contains a distinctive sequence of rocks, different in facies and structural style from those of the cratonic region east of the thrust belt. The thrust plates are characterized by persuasive, open to tight and locally overturned folds, and imbricate thrust faults, structural styles unusual in Phanerozoic cratonic rocks. The basal decollement zones of the plates are composed of intensely sheared, crushed, brecciated, and mylonitized rocks, the decollement at the base of the Medicine Lodge plate is as much as 300 meters thick. The Medicine Lodge and Grasshopper thrust plates are fringed on the east by a 10- to 50-kilometer-wide zone of tightly folded rocks cut by imbricate thrust fauls, a zone that forms the eastern margin of the thrust belt in southwest Montana. The frontal fold and thrust zone includes rocks that are similar to those of the craton, even though they differ in details of thickness, composition, or stratigraphic sequence. The zone is interpreted to be one of terminal folding and thrusting in cratonic rocks overridden by the major thrust plates from farther west. The cratonic rocks were drape-folded over rising basement blocks that formed a foreland bulge in front of the thrust belt. The basement blocks are bounded by steep faults of Proterozoic ancestry, which also moved as tear faults during thrusting, and seem to have controlled the curving patterns of salients and reentrants at the leading edge of the thrust belt. Radiometric and stratiographic evidence shows that the thrust belt was in its present position by about 75 million year go.

Idaho;Montana↗

Geology of the Blue Mountains region of Oregon, Idaho, and Washington: Stratigraphy, physiography, and mineral resources of the Blue Mountains region

PART 1: Stratigraphic and sedimentological analysis of sedimentary sequences from the Wallowa terrane of northeastern Oregon has provided a unique insight into the paleogeography and depositional history of the terrane, as well as establishing important constraints on its tectonic evolution and accretionary history. Its Late Triassic history is considered here by examining the two most important sedimentary units in the Wallowa terrane-the Martin Bridge Limestone and the Hurwal Formation. Conformably overlying epiclastic volcanic rocks of the Seven Devils Group, the Martin Bridge Limestone comprises shallow-water platform carbonate rocks and deeper water, off-platform slope and basin facies. Regional stratigraphic and tectonic relations suggest that the Martin Bridge was deposited in a narrow, carbonate-dominated (forearc?) basin during a lull in volcanic activity. The northern Wallowa platform was a narrow, rimmed shelf delineated by carbonate sand shoals. Interior parts of the shelf were characterized by supratidal to shallow subtidal carbonates and evaporites, which were deposited in a restricted basin. In the southern Wallowa Mountains, lithofacies of the Martin Bridge are primarily carbonate turbidites and debris flow deposits, which accumulated on a carbonate slope apron adjacent to the northern Wallowa rimmed shelf from which they were derived. Drowning of the platform in the latest Triassic, coupled with a renewed influx of volcanically derived sediments, resulted in the progradation of fine-grained turbidites of the Hurwal Formation over the carbonate platform. Within the Hurwal, Norian conglomerates of the Excelsior Gulch unit contain exotic clasts of radiolarian chert, which were probably derived from the Bakei terrane. Such a provenance provides evidence of a tectonic link between the Baker and Wallowa terranes as early as the Late Triassic, and offers support for the theory that both terranes were part of a more extensive and complex Blue Mountains island-arc terrane. PART 2: Mesozoic rocks exposed along the Snake River in the northern Wallowa terrane represent a volcanic island and its associated sedimentary basins within the Blue Mountains island arc of Washington, Oregon, and Idaho. In the northern part of the Wallowa terrane, rock units include the Wild Sheep Creek, Doyle Creek, and Coon Hollow Formations, the (informal) Imnaha intrusion, and the (informal) Dry Creek stock. The volcanic rocks of the Ladinian to Karnian Wild Sheep Creek Formation show two stages of evolution-an early dacitic phase Gower volcanic faciesY and a late mafic phase (upper volcanic facies). The two volcanic facies are separated by eruption-generated turbidites of siliceous argillites and arkosic arenites (argillitesandstone facies). The two magmatic phases of the Wild Sheep Creek Formation may be recorded by the compositional zoning from older quartz diorite and diorite to younger gabbro in the Imnaha intrusion. Although the Late Triassic Imnaha intrusion is in fault contact with the Wild Sheep Creek Formation, it may be a subduction-related pluton and was the likely magma source for the Wild Sheep Creek Formation. Interbedded with the upper volcanic facies are eruption-generated turbidite and debris flow deposits (sandstone-breccia facies) and thick carbonate units (limestone facies). The limestone facies consists of two marker units, which may represent carbonate platform environments. Clast imbrication, fossil orientation, and cross-stratification in the Wild Sheep Creek Formation indicate a shoaling to subaerial volcanic island to the south and southeast; sediment was transported to the north and northwest. The Karnian Doyle Creek Formation consists largely of epiclastic conglomerate, sandstone, and shale that were deposited in welloxygenated basins. Vitric tuffs interbedded with these sediments suggest shallow or subaerial pyroclastic eruptions. Quartz diorite clasts in this formation may indicate uplift

Idaho, Oregon, Washington↗

The Montana earthquake of June 27, 1925

The earthquake of June 27, 1925, in Montana caused considerable damage within an area of 600 square miles or more, the center of which is in latitude 46° 5' N. and longitude 111° 20' W., a short distance southeast of Lombard. It was a seismic disturbance of the first order of magnitude, but, owing to the hour at which it occurred and to other fortunate circumstances, no lives were lost and no fires broke out. The shock was startling throughout an area extending 75 miles or more in all directions from the epicenter and was sensible to persons within an area of 310,000 square miles. Within the epicentral area brick buildings suffered severely, rocks fell from cliffs, cracks opened in the ground, and the inhabitants experienced the usual symptoms of illness and emotions of alarm. Isoseismals drawn according to the Rossi-Forel scale show a wide indentation at the south due to a rapid decline of intensity in the volcanic area of Snake River Plain and Yellowstone Park.

Montana↗

Geology of the Payette National Forest and vicinity, west-central Idaho

Before the Late Cretaceous, the eastern and western parts of the geologically complex Payette National Forest, as divided by the Salmon River suture, had fundamentally different geologic histories. The eastern part is underlain by Mesoproterozoic to Cambrian(?) rocks of the Laurentian (Precambrian North American) continent. Thick Mesoproterozoic units, which are at least in part equivalent in age to the Belt Supergroup of northern Idaho and western Montana, under-went Mesoproterozoic metamorphic and deformational events, including intrusion of Mesoproterozoic plutons. During the Neoproterozoic to early Paleozoic, the western edge of Laurentia was rifted. This event included magmatism and resulted in deposition of rift-related Neoproterozoic to Lower Cambrian(?) volcanic and sedimentary rocks above Mesoproterozoic rocks. The western part of the forest is underlain by upper Paleozoic to lower Mesozoic island-arc volcanic and sedimentary rocks. These rocks comprise four recognized island-arc terranes that were amalgamated and intruded by intermediate-composition plutons, probably in the Late Jurassic and Early Cretaceous, and then sutured to Laurentia along the Salmon River suture in the Late Cretaceous. The Salmon River suture formed as a right-lateral, transpressive fault. The metamorphic grade and structural complexity of the rocks increase toward the suture from both sides, and geochemical signatures in crosscutting plutonic rocks abruptly differ across the crustal boundary. Having been reactivated by younger structures, the Salmon River suture forms a north-trending topographic depression along Long Valley, through McCall, to the Goose Creek and French Creek drainages. During the last stages of metamorphism and deformation related to the suture event, voluminous plutons of the Idaho batholith were intruded east of the suture. An older plutonic series is intermediate in composition and preserved as elongated and deformed bodies near the suture and as parts of roof pendants to younger intrusions to the east. A younger magma series consists of undeformed, marginally peraluminous plutons that formed east of the suture after accretion. After suture-related compression, crustal extension resulted in voluminous volcanic and plutonic rocks of the Eocene Challis magmatic complex on the east side of the forest. Extension, from the Late Cretaceous to post-Miocene, uplifted the area of the Idaho batholith relative to the western part of the forest and formed dominant highlands along the Snake River. Extensional basins also formed such that, in the Miocene, the Columbia River Basalt Group and related basaltic lavas flowed over most of the lower elevations on the western side of the forest and redirected erosional debris into north-trending, fault-controlled drainages and young sedimentary basins.

Idaho↗