USGS Science⌕ Search

SEARCH · USGS Science

Results for “International Journal of Environmental Science and Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 69Linked to original sources
USGS2025

Updating and recalibrating the integrated Santa Rosa Plain Hydrologic Model to assess stream depletion and to simulate future climate and management scenarios in Santa Rosa, Sonoma County, California

The Santa Rosa Plain Hydrologic Model (SRPHM) was developed and published in 2014 through a collaboration between the U.S. Geological Survey (USGS) and Sonoma Water to analyze the hydrologic system in the Santa Rosa Plain watershed, help meet the increasing demand for fresh water, and prepare for future uncertainties in water resources. The original model simulated hydrological conditions and water use from water years 1975 to 2010. Recently (2023), the USGS, in cooperation with Sonoma Water and the California State Water Resources Control Board, updated the SRPHM model to extend its simulation period to the end of the 2018 calendar year, incorporate new estimates of rural and agricultural water use, and use efficient input format for climate variables. The updated model was recalibrated, and evaluation of the new model calibration is included in this report. This report presents the results of comparing the hydraulic heads, streamflow, and groundwater budget simulated by the updated model with those generated by the original model and observed data. The main difference in the simulated budget between the original and updated SRPHM is the estimates of agricultural pumping, rural domestic pumping, and return flow generated from rural water use that was not simulated in the original model. The revised agricultural pumping is simulated using the agricultural package, which constrains pumping to available groundwater. The use of the agricultural package leads to a more realistic estimation of agricultural water use, with revised agricultural pumping being one-third less than that in the original model. The revised rural pumping is about half of the pumping in the original model because of using detailed parcel data to estimate population density in rural areas instead of coarse census tracts. Overall, average total inflows for water years 2006–10 simulated by the updated model were about 2 percent less than the original model, and the average total updated outflows were nearly 5 percent less than the original model. The updated model was then used to generate stream depletion maps, simulate climate change scenarios during 2019–99, and simulate water rights allocation using the Model for Decision Support in Integrated River Basin Management (MODSIM). The results from simulating eight future climate scenarios indicated either an increase in groundwater storage or no significant change in the next 80 years, along with an increase in recharge, an increase in actual evapotranspiration in six out of eight climate projections, and an increase in surface runoff. The increases in the simulated future groundwater storage, recharge, evapotranspiration, and runoff in most climate projections are mainly driven by the projected increase in precipitation in most of the future climate scenarios. The updated model also was used to test a pilot case study demonstrating water-resource allocation among different users with different water rights using the integrated MODSIM-Groundwater and Surface-Water Flow Model (GSFLOW) platform. The updated SRPHM serves as a valuable tool for analyzing historical and future hydrologic conditions in the Santa Rosa Plain watershed and preparing for future uncertainties.

California↗
USGS2026

Computation of regional groundwater budgets for the Virginia Coastal Plain aquifer system

Computation of detailed groundwater flow budgets for subdivisions of the Virginia Coastal Plain aquifer system has enabled quantification and more thorough understanding of groundwater flow within this important water resource. A zone budget analysis based on previously published groundwater models of the Virginia Coastal Plain and Virginia Eastern Shore indicates that groundwater conditions vary substantially throughout the Coastal Plain aquifer system because of local variations in hydrogeology and historical and ongoing variations in groundwater use and management. Decades of substantial groundwater withdrawal from the Coastal Plain aquifer system have altered groundwater flow from predevelopment conditions. Rates of sustainable withdrawal are limited because the downward groundwater flow rate into confined aquifers is a relatively small part of the total groundwater budget for the aquifer system compared to the rate of recharge at the land surface. Analyses of groundwater budgets from the Virginia Coastal Plain model indicate that groundwater flow is generally outward from the surficial aquifer to rivers and coastal waterbodies and downward through a series of underlying aquifers and confining units to the Potomac aquifer, which is the deepest aquifer and the source of most groundwater withdrawals. Downward flow into the Potomac aquifer is estimated to be only 7 percent of total net precipitation-derived net recharge at the land surface but makes up about 66 percent of inflow to the aquifer in Virginia, with much of the remaining inflow occurring laterally from outside of defined groundwater budget regions in Virginia. For several decades prior to 2010, high rates of withdrawal from the Potomac aquifer resulted in substantial decline in groundwater storage in the aquifer and in most overlying aquifers and confining units. From 2010 to 2023, rates of withdrawal substantially lower than the historical maximum resulted in small net increases in groundwater storage in the confined aquifer system for most regions of the Virginia Coastal Plain. Nevertheless, for the same period, groundwater storage for the entire model domain continues to incrementally decline, indicating that storage recovery in Virginia is offset by a continued decrease in storage in areas beneath the Chesapeake Bay or adjacent areas of Maryland and North Carolina. Withdrawals from the Potomac aquifer have induced substantial downward flow which is a large part of groundwater budgets for confined aquifers such as the Potomac. For the most recent simulated conditions (2023) downward groundwater flow continues, but because vertical flow rates are a function of the difference between water pressure in the upper surficial systems and lower confined units, rates of downward flow are lower than those in earlier decades as the confined water levels partially recover from larger groundwater withdrawals in the past. Geographically, groundwater flow is generally inward from perimeter regions of the Virginia Coastal Plain toward central regions with the largest withdrawal rates. Groundwater inflow from coastal regions could be contributing to saltwater intrusion, even though that was not measured in this study. Analyses of groundwater budgets from the Virginia Eastern Shore peninsula, a geographic region of the Virginia Coastal Plain, indicate that groundwater flow for that isolated aquifer system is generally outward from the surficial aquifer to coastal water bodies and downward into the confined Yorktown-Eastover aquifer system, which is the source of most withdrawals. Downward groundwater flow into the confined Yorktown-Eastover aquifer system is estimated to be less than 2 percent of total recharge and less than 9 percent of net recharge at the water table but makes up more than 93 percent of all inflow to the confined aquifer system. Decades of substantial but relatively consistent groundwater withdrawals have induced greater downward flow rates into the confined aquifer system but also have resulted in loss of groundwater from storage. For the most recent simulated period (2023), estimated storage loss accounts for slightly under 7 percent of withdrawals from the confined aquifer system. The reported withdrawal rate for this period from the confined Yorktown-Eastover system is near the highest reported rate for the Virginia Eastern Shore, which means that the storage depletion is expected to continue, even though groundwater levels appear to be relatively stable. Estimated groundwater flow rates upward from the confining unit underlying the Yorktown-Eastover system and low rates of inflow from coastal water bodies underscore ongoing concerns about up-coning and lateral intrusion of salty groundwater.

Virginia↗
USGS2024

The impact of source time function complexity on stress drop estimates

Earthquake stress drop—a key parameter for describing the energetics of earthquake rupture—can be estimated in several different, but theoretically equivalent, ways. However, independent estimates for the same earthquakes sometimes differ significantly. We find that earthquake source complexity plays a significant role in why theoretically (for simple rupture models) equivalent methods produce different estimates. We apply time‐ and frequency‐domain methods to estimate stress drops for real earthquakes in the SCARDEC (Seismic source ChAracteristics Retrieved from DEConvolving teleseismic body waves, Vallée and Douet, 2016 ) source time function (STF) database and analyze how rupture complexity drives stress‐drop estimate discrepancies. Specifically, we identify two complexity metrics—Brune relative energy (BRE) and spectral decay—that parameterize an earthquake’s complexity relative to the standard Brune model and strongly correlate with the estimate discrepancies. We find that the observed systematic magnitude–stress‐drop trends may reflect underlying changes in STF complexity, not necessarily trends in actual stress drop. Both the decay and BRE parameters vary systematically with magnitude, but whether this magnitude–complexity relationship is real remains unresolved.

Bulletin of the Seismological Society of America↗
USGS2025

A synthesis engine for constructing geologic maps of the United States

The geologic history of the United States is cataloged in thousands of geologic maps produced during many decades. However, the disparate nature of these individual maps makes it challenging to assess resources, research geologic histories, or characterize natural hazards holistically across the Nation. The U.S. House of Representatives 2020 appropriations bill for the U.S. Department of the Interior (H.R. 116-100) requires the U.S. Geological Survey to “bring together detailed national and continental-resolution [two-dimensional] and [three-dimensional] information produced throughout the Survey and by [F]ederal and [S]tate partners.” In response to this directive, this report presents a compilation and synthesis of geologic maps across the United States in the form of a relational database. The synthesis database includes thematic maps that synthesize the Nation’s geology, and retains the original input maps as well as linkages to standardized vocabularies to aid the discoverability of geologic information. Specifically, the synthesis database is targeted toward producing four National-resolution maps for the conterminous United States: Quaternary geology, the geology at the Earth’s surface, pre-Quaternary geology, and Precambrian geology. In addition, the synthesis database includes the infrastructure necessary to expand to additional resolutions in the future.

conterminous United States↗
USGS2024

Debris avalanches in the northern California Coast Range triggered by plate boundary earthquakes

Determining the timing and cause for ancient hillslope failures proves difficult in the western United States, yet critical as it ties directly into groundmotion estimates for hazardous events. This knowledge gap is important to confront as hillslope failures are candidates to be triggered by earthquakes along active plate boundaries. We identify two prehistoric, i.e., preinstrumental history, debris avalanches (3 10^6 and 6 10^6 m^3) in the Coast Ranges of northern California. These debris avalanches are well suited for studying the timing (to the exact year) and trigger as the densely forested landscape enables effective use of dendrochronology and high-resolution radiocarbon to pinpoint time of failure, and the legacy of landslide studies in the region provides context for evaluating a seismic trigger as the most likely triggering mechanism. Neither debris avalanche was triggered by the largest precipitation event of the instrumental record in 1964 CE, and the two debris avalanche sites are physiographically suited to accommodate topographic amplification of seismic shaking. Through a suite of geologic and dendrochronologic evidence, we establish the likely time of failure of the two debris avalanches as 1906 CE and 933 CE. The failure of the younger landslide coincides with the 1906 CE San Francisco earthquake on the Pacific/North American plate boundary, while the older landslide dates to 933 CE falling within the broad age range (850-966 CE) of a likely megathrust earthquake on the Cascadia subduction zone as recorded in coastal marshes in Humboldt Bay, California. The precise age on the 933 CE debris avalanche could trim the uncertainty on a Cascadia subduction zone event from 116 years to one year. Utilizing debris avalanche records from sites suitable to record seismic shaking improves understanding of plate-boundary earthquake timing and extent of shaking.

Bulletin of the Seismological Society of America↗
USGS2026

Assessment of extreme subsurface hydrologic conditions captured during atmospheric river storms in the San Francisco Bay area (California, USA) with applications to shallow landslide early warning

An increase in soil pore water pressure is the typical trigger for the majority of landslides caused by rainfall. Atmospheric river storms, common to the west coast of North America during the winter season, can deliver landslide triggering rainfall resulting in severe impacts to coastal communities. Using a network of hydrologic monitoring stations situated within landslide-prone terrain in the San Francisco Bay area of California (USA), we assess the meteorologic conditions and resulting hydrologic and landslide response resulting from eight consecutive storm events that caused thousands of shallow landslides during the winter of 2022–2023. We find disparate hydrological responses and resultant degrees of observed landsliding ranging from < 1 landslide/km2 to 18 landslides/km2 at the monitoring sites that reflect the interplay and differences between rainfall delivery, subsurface hydrological characteristics, and geotechnical properties at each site. Antecedent soil moisture from both early season rainfall and the first storm in the sequence played a critical role in setting up some hillslopes for failure. Subsequent storms then generated elevated pore water pressures for several hours with associated landsliding. However, we find that the occurrence of widespread landsliding required not only sufficient pore water pressure magnitude in susceptible hillslopes, but also full and prolonged effective soil saturation throughout hillslope profiles. Landslides may still occur at lower values and durations of effective saturation but are likely to be less extensive regionally. We present these findings within the context of research directions and improvements to landslide early warning systems first suggested by researchers 40 years ago.

California↗
USGS2025

To heal or not to heal?: 1. The effect of pore fluid pressure on the frictional healing behavior of lithologies in Oklahoma

The competition between fault healing (i.e., re-strengthening) and fault loading determines the timing and magnitude of fault failure within the seismic cycle. Repeating earthquakes can give observational estimates of fault healing rates, however, it is difficult to link laboratory studies of frictional healing and observed healing rates from repeating earthquakes in part because of uncertainty in lithology at depth. Due to well-constrained and relatively simple geology, earthquakes in Oklahoma can be linked to the granitic basement rock and to the Arbuckle Group, which is primarily composed of dolomite at earthquake depths. Here, we conduct friction experiments to measure healing rates of the two earthquake-bearing lithologies at confining pressures representative of earthquake depths and pore pressures ranging from 0% to 80% of the confining pressure. We measure frictional healing by executing slide-hold-slide tests with hold times ranging from 3 s to 3000 s. The friction experiments on the Troy Granite indicate that pore fluid pressure does not greatly affect healing rate. On the other hand, the dolomite of the Arbuckle Group exhibits decreased healing with increased pore fluid pressure, with weakening at the highest pore pressure. We hypothesize that this is due to an increase in dissolution of dolomite at high pore pressures/low effective normal stress. These healing rates are used in the companion paper to understand the moment-recurrence time behavior of repeating earthquakes in Prague, Oklahoma. This work has implications for possible enhanced dissolution and weakening behavior of the Arbuckle Group during wastewater injection activities.

Oklahoma↗
USGS2025

Three-dimensional seismic velocity model for the Cascadia Subduction Zone with shallow soils and topography, version 1.7

The U.S. Geological Survey’s seismic velocity model for the Cascadia Subduction Zone provides P- and S-wave velocity ( V P and V S , respectively) information from 40.2° to 50.0° N. latitude and −129.0° to −121.0° W. longitude, and is used to support a variety of research topics, including three-dimensional (3D) earthquake simulations and seismic hazard assessment in the Pacific Northwest. This report describes an update to the previous version (v) 1.6 of the 3D seismic velocity model for the Cascadia Subduction Zone. This new model (herein referred to as v1.7) contains more detailed near-surface structure for improved earthquake ground motion modeling. Updated features include the addition of a new shallow soil velocity model in the top few hundred meters and the option of adding user-specified topography. Although v1.6 of the Cascadia seismic velocity model has a minimum V S of 600 meters per second (m/s), the new model (v1.7) has a minimum V S of approximately 40 m/s. Overall, this update will allow for more accurate ground motion estimates from 3D simulations of scenario earthquakes in the Cascadia Subduction Zone region.

British Columbia, California, Oregon, Washington↗
USGS2026

Characterizing precariously balanced rocks (PBRs) in the eastern United States for estimating maximum past earthquake ground motions

Fragile geologic features (FGFs) can be used to estimate an upper bound to the strength of earthquake ground shaking in the past thousands to tens of thousands of years. FGFs could be especially useful in the eastern United States, where few active faults are available for paleoseismic studies and where low seismic attenuation means that an earthquake could damage FGFs at large distances. This article describes a pilot study of one form of FGF, precariously balanced rocks (PBRs), in the Blue Ridge of Virginia, ∼160 km from the central Virginia seismic zone (CVSZ) and ∼100 km from Virginia’s Giles County seismic zone (GCSZ). The main goal is to develop and refine methods for studying PBRs in the eastern United States. Photogrammetric 3D models of the rocks were used to locate their centers of mass and delineate their basal contacts, with the latter corroborated by wrapping a wire around the bases to verify the circumferences. Relations between hill geometry and amplification were used to estimate topographic amplification. Seismometers on the PBRs provided the frequencies, amplitudes, and directions of rocking after giving the rocks gentle pushes. The levels of ground shaking likely to topple the rocks were compared with the median hazard curves from the U.S. Geological Survey’s National Seismic Hazard Model and were used to map magnitudes of earthquakes in the nearby region likely to topple the rocks. Results indicate that an M w ≥ 7.5 earthquake is needed in the CVSZ or near the 2020 Sparta, North Carolina, earthquake to topple the two most fragile PBRs and that an earthquake of ~ M w 7–7.5 in the GCSZ is needed. The fragilities and estimated ages of the PBRs (20–40 ka) are thus consistent with the absence of such events in the historical record in the nearby region.

eastern United States↗
USGS2026

ShakeAlert Earthquake Early Warning System performance during the Mw 7.0 offshore Cape Mendocino earthquake

The 5 December 2024 M w 7.0 Offshore Cape Mendocino earthquake was a challenging test of the U.S. West Coast ShakeAlert earthquake early warning system due to its offshore epicenter and limited near‐source station coverage. We analyzed real‐time performance of all components of the ShakeAlert system, including the seismic algorithms (earthquake point‐source integrated code [EPIC] and Finite‐fault rupture Detector [FinDer]), the geodetic algorithm (Geodetic First Approximation of Size and Time–peak ground displacement [GFAST‐PGD]), and network telemetry during the event. EPIC created the first solution for this earthquake 15 s after origin time with an initial magnitude estimate of M 5.6 and location error of 10 km from the Advanced National Seismic System epicenter. An early spurious trigger from station CE.89101 fortuitously maintained location accuracy and, correspondingly, magnitude accuracy. FinDer contributed its first solution at 18 s with a location estimate closer to the seismic network and produced two distinct rupture geometries, leading to minor fluctuations in estimated intensity contours. GFAST‐PGD did not meet alerting thresholds but otherwise performed as expected. Network latencies were <2 s for most stations, supporting the rapid detection of this earthquake by the system. Roughly five million alerts were delivered to cell phone devices in California and Oregon during this event. This was also the first instance of a school district‐wide ShakeAlert‐powered system being activated. Comparisons to recorded seismograms demonstrate that the maximum warning times before potentially damaging shaking (intensity 6+) were in the range of 5–55 s. Although the ShakeAlert system provided accurate solutions and useful alert delivery, this earthquake raised awareness of potential issues within the system, including the need for improved offshore location estimates, a combination of solutions from ShakeAlert servers, and handling of spurious triggers.

California↗
USGS2026

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri River near Kansas City, Missouri, August 8–9, 2023

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near 8 bridge crossings of the Missouri River near Kansas City, Missouri, on August 8–9, 2023. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches that extended about 1,550 to 1,640 feet longitudinally and generally extended laterally across the active channel from bank to bank during low floodflow to nonflood conditions. These surveys provided the channel geometry and hydraulic conditions of the river at the time of the surveys and provided characteristics of scour holes, which may be useful in developing or verifying predictive guidelines or equations for computing potential scour depth. The data collected from the surveys may also be useful to the Missouri Department of Transportation as a record of low floodflow conditions in regards to the stability and integrity of the bridges with respect to bridge scour. Bathymetric data were collected around every in-channel pier. Scour holes were at most piers where bathymetry could be obtained, except for those piers on banks or surrounded by riprap. All the bridge sites in this study were surveyed and documented in previous studies. The average difference between the bathymetric surfaces ranged from 0.07 to 4.16 feet higher in 2023 than 2019, which indicates overall deposition between the survey dates, as might be expected based purely on streamflow at the time of the survey. However, the average difference between the bathymetric surfaces ranged from 1.44 feet higher to 1.88 feet lower in 2023 than 2015, which indicates a dynamic equilibrium of scour and deposition overall between those surveys, despite the lower flow conditions in 2023. Similarly, the average difference between the bathymetric surfaces ranged from 3.18 feet higher to 5.19 feet lower in 2023 than 2011, which indicates a relative equilibrium between scour and deposition overall, albeit the trend was toward scour as might be expected because of the substantial flood event in 2011. Riprap blankets and alignment to flow had a substantial effect on the size of the scour hole for a given pier. Piers that were partially or fully surrounded by riprap blankets had scour holes that were substantially smaller (to nonexistent) compared to piers with no rock or riprap and effectively mitigated the scour holes historically observed at these piers. Several of the structures had piers that were skewed to primary approach flow. At most of the structures, the scour hole was deeper and longer on the side of the pier with impinging flow than the leeward side, with some amount of deposition on the leeward side, as typically observed at piers skewed to approach flow.

Kansas, Missouri↗
USGS2026

Streamflow, water quality, and constituent loads and yields, Scituate Reservoir drainage area, Rhode Island, water year 2023

As part of a long-term cooperative program to monitor water quality within the Scituate Reservoir drainage area, the U.S. Geological Survey, in cooperation with Providence Water (formerly the Providence Water Supply Board), collected streamflow and water-quality data in tributaries to the Scituate Reservoir, Rhode Island. Streamflow and concentrations of chloride and sodium estimated from records of specific conductance for 16 tributaries were used to calculate loads of chloride and sodium during water year 2023 (October 1, 2022, through September 30, 2023). Water-quality samples were collected by Providence Water at 38 sampling stations on tributaries to the Scituate Reservoir during water year 2023. These water-quality data are summarized by using values of central tendency and are used, in combination with measured (or estimated) streamflows, to calculate loads and yields of selected water-quality constituents for water year 2023. Annual mean streamflows for monitoring stations in this study ranged from 0.47 to 34.4 cubic feet per second during water year 2023. At the 16 continuous-record streamgages, tributaries transported about 3,000 metric tons of chloride and 1,900 metric tons of sodium to the Scituate Reservoir; annual chloride yields for the tributaries ranged from 19 to 200 metric tons per square mile, and annual sodium yields ranged from 13 to 120 metric tons per square mile. At the stations where water-quality samples were collected by Providence Water, the medians of the median daily loads were 65,000 million colony forming units per day for coliform bacteria, 870 million colony forming units per day for Escherichia coli , 200 kilograms per day for chloride, 8.2 grams per day as nitrogen for nitrite, 520 grams per day as nitrogen for nitrate, and 300 grams per day as orthophosphate for phosphate. The medians of the median yields were 25,000 million colony forming units per day per square mile for coliform bacteria, 600 million colony forming units per day per square mile for Escherichia coli , 65 kilograms per day per square mile for chloride, 4.6 grams per day per square mile as nitrogen for nitrite, 180 grams per day per square mile as nitrogen for nitrate, and 180 grams per day per square mile as orthophosphate for phosphate.

Rhode Island↗
USGS2025

Chemical and isotopic fractionation during melt inclusion formation

Melt inclusions are used to study the origin and evolution of magmas. The extent to which they represent equilibrium melt compositions, however, critically hinges on the ratio of crystal growth rate to diffusion rate in melts. If the rate of crystal growth is limited by the supply of nutrients and the dissipation of unwanted components, the trapped melt will be depleted in compatible elements and enriched in incompatible elements. Despite widespread recognition of the potential for melt inclusions to trap disequilibrium compositions, their identification remains a challenge. Here, we demonstrate how stable isotopes provide a solution to this problem. Melt inclusions in basaltic tephra from Kīlauea volcano, Hawai‘i, display Mg isotope fractionation up to 0.49‰ ( 26 Mg/ 24 Mg) relative to bulk rock. These observations indicate that kinetic processes, such as chemical diffusion, are at play, as equilibrium mineral-melt isotope fractionation at high temperatures is an order of magnitude smaller. We propose that the heavy Mg isotopic compositions of the melt inclusions were generated by the faster diffusion and thus preferential incorporation of 24 Mg by the growing olivine, leaving the slower diffusant ( 26 Mg) behind. The incompatible elements (e.g., Ca, Ti, and K) are predicted to display similarly large fractionations when boundary layer effects are significant. These findings show that stable isotopes can be a useful tool in identifying disequilibrium compositions in melt inclusions.

Geology↗
USGS2025

Hydraulic conductivity and transmissivity estimates from slug tests in wells within the Mississippi Alluvial Plain, Arkansas and Mississippi, 2020

During the spring and summer of 2020, the U.S. Geological Survey conducted single-well slug tests on selected observation wells within the Mississippi Alluvial Plain in Arkansas and Mississippi to estimate hydraulic conductivity and transmissivity values for the Mississippi River Valley alluvial and middle Claiborne aquifers. Well and aquifer data were collected from field measurements, well-construction reports, and published aquifer-thickness information. A total of 324 slug-in and slug-out tests were conducted on 48 wells by using mechanical slugs to displace the water column and submersible pressure transducers to record changes in water levels in the wells. Hydraulic conductivity of the aquifers in which the wells are screened was estimated by curve fitting the water-level-change data using aquifer test analysis software. Estimates of aquifer transmissivity were made by multiplying the estimated hydraulic conductivity value by the aquifer thickness at well locations. Mean hydraulic conductivity estimates for 44 observation wells screened in the Mississippi River Valley alluvial aquifer range from 3 to 401 feet per day, and mean transmissivity estimates range from 285 to 80,559 feet squared per day. Mean hydraulic conductivity estimates for four observation wells screened in units of the middle Claiborne aquifer range from 0.14 to 183 feet per day, and mean transmissivity estimates range from 55 to 67,913 feet squared per day. The results from these tests can be used to improve the understanding of water availability and groundwater migration, to refine groundwater models, and to ultimately provide stakeholders and decisionmakers better information for management of the groundwater resources within the Mississippi Alluvial Plain.

Arkansas, Mississippi↗
USGS2025

Assessing flood water infiltration and storage in a restored floodplain

In urban areas, floodplain restoration is gaining prominence as a strategy for restoring the natural functions of floodplain ecosystems and reducing flood risk. This has spurred research into potential interactions between floodwaters, the hyporheic zone, and the floodplain aquifer. An urban restored stream in Wisconsin, USA, was used as a case study to examine four methods to estimate floodplain infiltration and storage during overbank floods. We characterised flood-related infiltration over a 4-year period from 2018 through 2021 by simultaneously and continuously measuring groundwater levels and vertical temperature profiles with stream water levels linked to high-resolution flood inundation maps. High-resolution topographic data helped to quantify surface floodplain storage and the unsaturated soil volume relative to flood stage. Infiltration estimates from the simple methods align well with those from the more complex methods; however, the complex methods provide additional insights about the factors influencing infiltration. Results from all methods indicate that the volume of water that vertically infiltrates during floods is likely small relative to the total volume of the flood, with 0.08%–0.52% of flood water infiltrating into the floodplain, on average. Spatially variable vertical hydraulic gradients, driven by flood depth, groundwater level, and permeability, imply heterogeneous patterns of infiltration across the floodplain. Gradients favourable for infiltration typically occurred during the onset of flooding but, over the study period, were mostly (98% of the time) favourable for groundwater discharge to the channel (non-flood periods). These findings highlight the importance of considering surface-groundwater dynamics, floodplain soils, and unsaturated floodplain volume in defining the benefits of floodplain infiltration for flood attenuation.

Wisconsin↗
USGS2026

Channel morphology and large wood control postfire debris-flow erosion and deposition

Runoff-generated debris flows are a known response to wildfire, and accurately predicting the volume of these debris flows is important for estimating the magnitude of downstream hazards. Prior data collection efforts have focused on debris-flow volume measurements at catchment outlets, but few studies have considered how erosion and deposition modulate the volume of sediment arriving at catchment outlets. This study takes advantage of a high-resolution dataset to document the factors that control the total debris-flow volume reaching the catchment outlet during a fatal postfire debris flow. Using pre- and post-event airborne lidar, satellite imagery and field mapping, we found that a postfire debris flow in the Black Hollow catchment in northern Colorado eroded 136,000 ± 30,000 m 3 and redeposited 27,000 ± 7,500 m 3 in the main channel. Most of the in-channel deposition (52% by volume) occurred where a confined channel reach transitioned to an unconfined channel reach downstream, allowing the flow to widen and deposit material. Wood jams played multiple roles in the debris-flow dynamics, both nucleating deposition (25% of the deposit volume was stored behind wood jams) and exacerbating erosion (50% of the total erosion occurred downstream from a wood dam break). The remaining deposition occurred due to spatial changes in channel slope as well as deposition observed at newly formed channel bars. Using these data in this study, we identified topographic and vegetation metrics that can be used (pre-event) to anticipate where deposition may occur in channels prior to a debris flow.

Colorado↗
USGS2024

Stream nitrate dynamics driven primarily by discharge and watershed physical and soil characteristics at intensively monitored sites: Insights from deep learning

We developed a suite of models using deep learning to make hindcast predictions of the 7‐day average backward‐looking nitrate concentration at 46 predominantly agricultural sites across the midwestern and eastern United States. The models used daily observations of discharge and meteorological variables and watershed attributes describing anthropogenic modification to hydrology, nitrogen application, climate, groundwater, land use, watershed physiographic attributes, and soils. Across all sites, discharge and watershed soil and physiographic attributes showed a strong influence on model performance. Analysis of drivers across sites revealed considerable regional differences related to controlling processes such as groundwater contributions. We tested several ways to pool data across sites to develop accurate models and make the most effective use of available data. Single‐site models, in which models are trained and tested at a single location, showed generally strong predictive performance (median Kling‐Gupta Efficiency = 0.66), and accuracy at poorly performing sites could be improved by grouping sites with similar characteristics. Developing a single model for all sites reduced performance at several locations with distinct characteristics, suggesting that there is a threshold of dissimilarity beyond which more data does not improve the model. While many deep learning studies have shown that national or even global models can outperform local models, it is not clear that this is true for water quality constituents. This study demonstrates how data can be combined effectively, using deep learning to develop accurate and interpretable models of instream nitrate at sites where varying processes are responsible for changes in nitrate concentration.

Water Resources Research↗
USGS1991

Wetland sedimentation and vegetation patterns near selected highway crossings in West Tennessee

Wetland sedimentation and vegetation patterns at 11 highway crossings in West Tennessee were studied from 1987 to 1989. The purpose of the study was to investigate potential adverse effects of highway crossings on wetlands. Sedimentation rates, determined from root-burial depths, were highly variable. Average rates offine-grained deposition ranged from 0.005 to 0.033 foot per year for stations in locally ponded areas and from -0.002 to 0.039 foot per year for stations in drained areas. Sedimentation rates upstream from highway crossings were not significantly different from downstream rates at 8 of the 11 study sites. Three study sites had significantly greater sedimentation rates downstream. Sand splays were observed downstream from bridges at most study sites. Vegetation patterns and tree growth appear most strongly related to hydropetiod, defined as the average length of time an area is covered by water each year. The influence of sedimentation on tree growth is difficult to separate from the influence of hydroperiod because areas with high sedimentation rates typically have long hydroperiods. Estimated hydroperiod increased no more than 1 percent because of backwater from the highway crossings at the 11 study sites, while the estimated average depth of flood-plain inundation increased by an average of 6 percent.

Tennessee↗