USGS Science⌕ Search

SEARCH · USGS Science

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources
USGS1993

Origin and significance of tourmaline-rich rocks in the Broken Hill district, Australia

Tourmaline-rich rocks are widespread minor lithologies within the Early Proterozoic Willyama Supergroup in the Broken Hill district, Australia. Tourmaline concentrations occur in strata-bound and local stratiform tourmalinites, clastic metasedimentary rocks, quartz-gahnite lode rocks, stratiform Pb-Zn-Ag sulfide ores, garnet quartzites, strata-bound scheelite deposits, quartz-tourmaline nodules, discordant quartz veins, and granitic pegmatites. Most of the tourmaline-rich rocks are within the Broken Hill Group that hosts the main Pb-Zn-Ag ores.At the Globe mine along the northeast end of the main lodes, tourmalinites are closely associated with Pb-Zn-Ag mineralization and in places are interbedded with Mn-rich garnet quartzites. Galena and other ore minerals occur locally in the cores of recrystallized tourmaline grains in these tourmalinites, indicating that tourmaline and sulfides were present together prior to deformation and high-grade metamorphism. Electron microprobe analyses of tourmalines intergrown with Fe sulfides at the Globe mine show Mg-rich compositions relative to tourmalines in sulfide-free assemblages from the same area, suggesting early (premetamorphic) introduction of boron and Mg enrichment of tourmaline by sulfide-silicate reactions during metamorphism.Combined field and geochemical data indicate that the district tourmalinites represent normal clastic sediments that were metasomatically altered by boron-rich hydrothermal fluids at or below the sediment-water interface. Whole-rock chemical analyses of 33 tourmaline-rich rocks show linear trends of data for major and trace elements that closely resemble the trends observed for unmineralized elastic metasedimentary rocks of the district. Average Fe/Al, Mg/Al, Na/Al, and Ti/Al molar ratios of the tourmaline-rich rocks and clastic metasediments are very similar; the average K/Al molar ratio of the tourmaline-rich rocks is significantly lower than that of the clastic metasediments, reflecting the loss of K during tourmalinite formation. Chondrite-normalized patterns of rare earth elements (REE) in the quartz-rich tourmalinites are generally similar to those of the clastic metasediments, except for minor depletions of light REE; local positive and negative Ce anomalies suggest tourmalinite formation in the presence of seawater or a seawater-derived pore fluid. The geochemical data imply relative immobility of Al, Ti, Cr, and heavy REE during hydrothermal alteration and later metamorphism. Boron isotope analyses of 52 tourmaline separates show a total range of delta 11 B values from -26.8 to -17.0 per mil. Fine-grained, euhedral, nonpoikilitic tourmalines from tourmalinites in the andalusite-muscovite zone in the northern part of the district (e.g., Black Prince mine) have delta 11 B values from -21 to -17 per mil, whereas coarse granoblastic and poikilo-blastic tourmalines from the sillimanite and two-pyroxene granulite zones in the southern part of the district (e.g., Globe mine) have delta 11 B values of-24 to -19 per mil. Tourmalines in strongly retrogressed tourmalinites have delta 11 B values from about -27 to -20 per mil. The observed variations in delta 11 B are consistent with prograde and retrograde metamorphic fractionation of boron isotopes, in which the fluid phase is preferentially enriched in the heavier isotope ( 11 B). Premetamorphic hydrothermal fluids that deposited the Black Prince tourmalinites had delta 11 B values of-8 to -5 per mil at 200 degrees to 300 degrees C, suggesting a boron source from nonmarine evaporite borates.Tourmalinites in the Broken Hill district apparently formed by the same submarine hydrothermal processes as the main Pb-Zn-Ag lodes and the siliceous ferromanganese protoliths of the garnet quartzites. In our model, the hydrothermal system(s) acquired abundant boron by leaching evaporitic borates within the Thackaringa Group, the stratigraphic sequence that underlies the Broken Hill Group and most of the tourmaline concentrations. We suggest that evaporites of the Thackaringa Group provided a source of readily extractable boron for formation of the tourmalinites and also the source of the fluoride, sulfur, and perhaps the carbonate in the main lodes; such evaporites may have been critical for increased metal chloride complexing and transport necessary for deposition of the high-grade Pb-Zn-Ag ores. The Broken Hill deposit may have formed contemporaneously with the Mount Isa and McArthur River Pb-Zn-Ag deposits in similar evaporite-bearing sequences during widespread Early Proterozoic continental rifting.

Economic Geology↗
USGS1996

Significance of tourmaline-rich rocks in the North Range group of the Cuyuna iron range, east-central Minnesota

Concentrations of tourmaline in Early Proterozoic metasedimentary rocks of the Cuyuna iron range, east-central Minnesota, provide a basis for redefinition of the evolutionary history of the area. Manganiferous iron ore forms beds within the Early Proterozoic Trommald Formation, between thick-bedded granular iron-formation having shallow-water alepositional attributes and thin-bedded, nongranular iron-formation having deeper water attributes. These manganese-rich units were previously assumed to be sedimentary in origin. However, a reevaluation of drill core and mine samples from the Cuyuna North range has identified strata-bound tourmaline and tourmalinite, which has led to a rethinking of genetic models for the geology of the North range. We interpret the tourmaline-rich rocks of the area to be a product of submarine-hydrothermal solutions flowing along and beneath the sediment-seawater interface. This model for the depositional environment of the tourmaline is supported by previously reported mineral assemblages within the Trommald Formation that comprise aegirine; barium feldspar; manganese silicates, carbonates, and oxides; and Sr-rich barite veins.In many places, tourmaline-rich metasedimentary rocks and tourmalinites are associated locally with strata-bound sulfide deposits. At those localities, the tourmaline-rich strata are thought to be lateral equivalents of exhalative sulfide zones or genetically related subsea-floor replacements. On the basis of the occurrence of the tourmaline-rich rocks and tourmalinites, and on the associated minerals, we suggest that there is a previously unrecognized potential for sediment-hosted sulfide deposits in the Cuyuna North range.

Economic Geology↗
USGS1997

Environment of ore deposition in the creede mining district, San Juan Mountains, Colorado: Part V. Epithermal mineralization from fluid mixing in the OH vein

Detailed fluid inclusion studies on coarse-grained sphalerite from the OH vein, Creede, Colorado, have shown that the abrupt color changes between growth zones correspond to abrupt changes in the nature of the ore fluids. Within each growth zone, however, the composition of the fluids remained constant. The base of a distinctive orange-brown growth zone marks a sharp increase in both temperature and salinity relative to the preceding yellow-white zone. The orange-brown growth zone can be correlated along much of the vein and is believed to represent a time-stratigraphic interval. Along the vein, temperatures and salinities of fluid inclusions within this interval show a systematic decrease from about 285??C and 11.5 wt percent NaCl equiv near the base of the vein to about 250??C and 8 wt percent NaCl equiv, respectively, near the top of the vein. The iron concentration of this sphalerite growth zone shows a similar pattern, decreasing from about 2.8 to 1.2 mole percent FeS. When plotted on an enthalpy-salinity diagram, the fluid inclusion data define a spatial trend indicating the progressive mixing of deeply circulating hydrothermal brines with overlying, dilute ground waters. The hydrothermal brines entered the OH vein from below at a temperature, salinity, and density of approximately 285??C, 11.5 wt percent NaCl equiv, and 860 kg/m3, respectively, whereas the overlying ground waters appear to have been preheated to roughly 150??C and had an assumed salinity of 0 wt percent and a density of 920 kg/m3. The greater density of the heated ground water promoted mixing with the hydrothermal brine within the open fractures, causing sphalerite deposition. Although there were also episodes of boiling during vein mineralization, boiling appears unimportant for this sphalerite. Isotopic evidence and geochemical modeling studies also indicate that mixing was the depositional mechanism for sphalerite. An important aspect of the mixing hydrology of the Creede system involves an aquitard overlying the OH vein. This low permeability zone restricted the flow of ground water into the vein from above and forced the upwelling hydrothermal fluids to flow laterally along the vein. The mixing environment thus occurred along the interface between a deeply circulating hydrothermal convection cell and a topographically driven shallow ground-water system.

Economic Geology↗
USGS1997

Element distribution patterns in the ordovician Galena group, Southeastern Minnesota: Indicators of fluid flow and provenance of terrigenous material

As part of a regional geochemical investigation of lower Paleozoic strata in the Hollandale embayment of southeastern Minnesota, elemental concentrations in acid-insoluble residues were determined for carbonate rock in the Middle Ordovician Galena Group. Elemental distribution patterns within the insoluble residues, particularly those of Ti, Al, and Zr, show that the Wisconsin dome and the Wisconsin arch, which contributed sediment to the embayment prior to Galena time, continued as weak sources of sediment during this period. In contrast, trace metals commonly associated with Mississippi Valley-type lead-zinc mineralization, including Pb, Zn, Cu, Ag, Ni, Co, As, and Mo, show dispersal patterns that are independent of those associated with primary depositional phenomena. These trace metals are concentrated in southern Minnesota in carbonate rocks near the interface between limestone- and dolostone-dominated strata. Dispersal patterns imply that the metals were carried by a north-flowing regional ground-water system. The results show that the geochemical attributes of insoluble residues can be used to distinguish provenance and transport directions of primary sediments within a depositional basin from effects of subsequent regional ground-water flow systems.

Economic Geology↗
USGS2007

Crossing disciplines and scales to understand the critical zone

The Critical Zone (CZ) is the system of coupled chemical, biological, physical, and geological processes operating together to support life at the Earth's surface. While our understanding of this zone has increased over the last hundred years, further advance requires scientists to cross disciplines and scales to integrate understanding of processes in the CZ, ranging in scale from the mineral-water interface to the globe. Despite the extreme heterogeneities manifest in the CZ, patterns are observed at all scales. Explanations require the use of new computational and analytical tools, inventive interdisciplinary approaches, and growing networks of sites and people.

Elements↗
USGS2016

Where is the hot rock and where is the ground water— Using CSAMT to map beneath and around Mount St. Helens

We have observed several new features in recent controlled-source audio-frequency magnetotelluric (CSAMT) soundings on and around Mount St. Helens, Washington State, USA. We have identified the approximate location of a strong electrical conductor at the edges of and beneath the 2004–08 dome. We interpret this conductor to be hot brine at the hot-intrusive-cold-rock interface. This contact can be found within 50 meters of the receiver station on Spine 5, which extruded between April and July of 2005. We have also mapped separate regional and glacier-dome aquifers, which lie one atop the other, out to considerable distances from the volcano.

Washington↗
USGS1969

Flow of a disperse emulsion of crude oil in water in porous media

It has been suggested that oil migrates through reservoir sands in the form of a fine, disperse emulsion of oil in water, and that oil accumulations occur where the stream enters finer-grained rock such as silt or shale. In order to investigate the possible mechanisms, stable emulsions of oil in water were prepared without the use of wetting agents. They consisted of droplets 1/2 to 1-1/2 microns in diameter, in a concentration of 20 to 40 parts of oil per million of water. These emulsions passed freely through filter paper and ordinary passed freely through filter paper and ordinary sand. A plastic tube containing glass beads of 200-microns diameter included a bed 1/2-cm thick of crushed beads 37 to 88 microns in diameter. When the emulsion was passed through this tube, up to 80 percent of the oil was screened out at the coarse-fine interface. The amount removed depended on the contrast in grain size, the nature and the preferential wettability of the media. Similar results occurred when quartz sand was used as the coarse, and crushed sand as the fine medium. This screening did not occur as a result of capillary effects., because the pores were many times the diameter of the droplets. The oil collected as a result of flocculation of the droplets into strings and clusters., and the oil saturation in the pores consisted of masses of droplets with very little coalescence. Possibly electrostatic forces are more important Possibly electrostatic forces are more important than capillary in the behavior of fine, disperse, oil-in-water emulsions. our current ideas on multiphase flow in porous media may not apply to disperse emulsions.

Conference Paper↗
USGS1997

Kansas geological survey's Digital Petroleum Atlas (DPA) project

The Kansas Digital Petroleum Atlas (DPA) is a new approach to generating and publishing petroleum reservoir, field, play and basin studies. Atlas products are available anywhere in the world using a standard point-and-click World-Wide-Web interface. All information and technology in the DPA can be accessed, manipulated and downloaded in order to provide efficient transfer of the technology for client-defined solutions. The DPA design provides a dynamic product that is constantly evolving through new information structures, the latest research results, and incorporation of additional data. Through complete and flexible user access to both interpretative products and underlying reservoir and well data, the DPA significantly alters the relationship between research results, data access, and the transfer of technology.

Proceedings - SPE Annual Technical Conference and ↗
USGS2008

Determination of dominant biogeochemical processes in a contaminated aquifer-wetland system using multivariate statistical analysis

Determining the processes governing aqueous biogeochemistry in a wetland hydrologically linked to an underlying contaminated aquifer is challenging due to the complex exchange between the systems and their distinct responses to changes in precipitation, recharge, and biological activities. To evaluate temporal and spatial processes in the wetland-aquifer system, water samples were collected using cm-scale multi-chambered passive diffusion samplers (peepers) to span the wetland-aquifer interface over a period of 3 yr. Samples were analyzed for major cations and anions, methane, and a suite of organic acids resulting in a large dataset of over 8000 points, which was evaluated using multivariate statistics. Principal component analysis (PCA) was chosen with the purpose of exploring the sources of variation in the dataset to expose related variables and provide insight into the biogeochemical processes that control the water chemistry of the system. Factor scores computed from PCA were mapped by date and depth. Patterns observed suggest that (i) fermentation is the process controlling the greatest variability in the dataset and it peaks in May; (ii) iron and sulfate reduction were the dominant terminal electron-accepting processes in the system and were associated with fermentation but had more complex seasonal variability than fermentation; (iii) methanogenesis was also important and associated with bacterial utilization of minerals as a source of electron acceptors (e.g., barite BaSO 4 ); and (iv) seasonal hydrological patterns (wet and dry periods) control the availability of electron acceptors through the reoxidation of reduced iron-sulfur species enhancing iron and sulfate reduction.

Journal of Environmental Quality↗
USGS2015

Importance of the colmation layer in the transport and removal of cyanobacteria, viruses, and dissolved organic carbon during natural lake-bank filtration

This study focused on the importance of the colmation layer in the removal of cyanobacteria, viruses, and dissolved organic carbon (DOC) during natural bank filtration. Injection-and-recovery studies were performed at two shallow (0.5 m deep), sandy, near-shore sites at the southern end of Ashumet Pond, a waste-impacted, kettle pond on Cape Cod, MA, that is subject to periodic blooms of cyanobacteria and continuously recharges a sole-source drinking-water aquifer. The experiment involved assessing the transport behaviors of bromide (conservative tracer), Synechococcus sp. IU625 (cyanobacterium, 2.6 ± 0.2 µm), AS-1 (tailed cyanophage, 110 nm long), MS2 (coliphage, 26 nm diameter), and carboxylate-modified microspheres (1.7 µm diameter) introduced to the colmation layer using a bag-and-barrel (Lee-type) seepage meter. The injectate constituents were tracked as they were advected across the pond water–groundwater interface and through the underlying aquifer sediments under natural-gradient conditions past push-point samplers placed at ∼30-cm intervals along a 1.2-m-long, diagonally downward flow path. More than 99% of the microspheres, IU625, MS2, AS-1, and ∼44% of the pond DOC were removed in the colmation layer (upper 25 cm of poorly sorted bottom sediments) at two test locations characterized by dissimilar seepage rates (1.7 vs. 0.26 m d −1 ). Retention profiles in recovered core material indicated that >82% of the attached IU625 were in the top 3 cm of bottom sediments. The colmation layer was also responsible for rapid changes in the character of the DOC and was more effective (by three orders of magnitude) at removing microspheres than was the underlying 20-cm-thick segment of sediment.

Massachusetts↗
USGS1985

Geophysical techniques for reconnaissance investigations of soils and surficial deposits in mountainous terrain

Two techniques were assessed for their capabilities in reconnaissance studies of soil characteristics: depth to the water table and depth to bedrock beneath surficial deposits in mountainous terrain. Ground-penetrating radar had the best near-surface resolution in the upper 2 m of the profile and provided continuous interpretable imagery of soil profiles and bedrock surfaces. Where thick colluvium blankets side slopes, the GPR could not consistently define the bedrock interface. In areas with clayey or shaley sediments, the GPR is also more limited in defining depth and is less reliable. Seismic refraction proved useful in determining the elevation of the water table and depth to bedrock, regardless of thickness of overlying material, but could not distinguish soil-profile characteristics.

Soil Science Society of America Journal↗
USGS2008

Measuring the electrical properties of soil using a calibrated ground-coupled GPR system

Traditional methods for estimating vadose zone soil properties using ground penetrating radar (GPR) include measuring travel time, fitting diffraction hyperbolae, and other methods exploiting geometry. Additional processing techniques for estimating soil properties are possible with properly calibrated GPR systems. Such calibration using ground-coupled antennas must account for the effects of the shallow soil on the antenna's response, because changing soil properties result in a changing antenna response. A prototype GPR system using ground-coupled antennas was calibrated using laboratory measurements and numerical simulations of the GPR components. Two methods for estimating subsurface properties that utilize the calibrated response were developed. First, a new nonlinear inversion algorithm to estimate shallow soil properties under ground-coupled antennas was evaluated. Tests with synthetic data showed that the inversion algorithm is well behaved across the allowed range of soil properties. A preliminary field test gave encouraging results, with estimated soil property uncertainties (????) of ??1.9 and ??4.4 mS/m for the relative dielectric permittivity and the electrical conductivity, respectively. Next, a deconvolution method for estimating the properties of subsurface reflectors with known shapes (e.g., pipes or planar interfaces) was developed. This method uses scattering matrices to account for the response of subsurface reflectors. The deconvolution method was evaluated for use with noisy data using synthetic data. Results indicate that the deconvolution method requires reflected waves with a signal/noise ratio of about 10:1 or greater. When applied to field data with a signal/noise ratio of 2:1, the method was able to estimate the reflection coefficient and relative permittivity, but the large uncertainty in this estimate precluded inversion for conductivity. ?? Soil Science Society of America.

Conference Paper↗
USGS2018

Filtering of cyclic period infiltration in a layered vadose zone: 1. Approximation of damping and time lags

Core Ideas We describe an approximation for filtering of periodic infiltration in layered soil. Transitions in soil‐water properties between soil layers affect the filtering. Errors are smaller in soils where changes in soil‐water properties are small. Infiltration and downward percolation of water in the vadose zone are important processes that can define the availability of water resources. We present an approach that provides insight into how periodic infiltration forcings at the land surface filter in a layered vadose zone in terms of changes in the timing and magnitude of hydrologic responses. To represent geologically realistic systems, we used vertical sequences of one‐dimensional periodic solutions, where each solution represents a single soil in a layered profile. The overall approach is based on a linearized Richards equation and assumes that the effects on flow of continuous pressure head changes at soil interfaces are negligible. We evaluated the limit of these approximations by comparison with results from the numerical model HYDRUS‐1D, which uses the full Richards equation. We compared (i) the depth at which flux variations became steady, and (ii) the travel time of wetting fronts to reach a depth of 3 m. The solution was reasonably accurate (error less than a factor of 2) for infiltration cycles with periods from 30 to 365 d and for fluxes common in arid and semiarid environments (0–2 mm d −1 ). Lag times between a surface forcing and response at any depth were accurate (error less than a factor of 1.1). The approximation generally provided consistent estimates of the damping and time lag, such that it overestimated the depths where fluxes were steady and underestimated the time for a forcing to reach a specific depth.

Vadose Zone Journal↗
USGS2006

Identifying the effects of petrologic processes in a closed basaltic system using trace element concentrations in olivines and glasses: Implications for comparative planetology

We use trace-element concentrations in olivines and glasses from a closed basaltic system to identify the effects of petrologic processes on the trace-element record of that system. The closed basaltic system in question is the Makaopuhi Lava Lake (MLL), which is closed with respect to magma mixing. Detailed studies of this lava lake have provided important information about system variables and petrologic processes that have been measured and observed at the lake. These previous studies show that olivine crystallized from the lava lake at all stages of the lake’s evolution, which means that olivine and residual glasses contain a record of the lake’s petrologic history. We use this information, in conjunction with variations in trace-element concentrations in olivines and glasses, to show that mineral crystallization, gravitational settling, convective flow, filter pressing, and mineral-melt interface kinetics have characteristic effects on the trace element record of a closed basaltic system. These results are pertinent to the field of comparative planetology because they can be used to evaluate petrologic information in small samples from other planetary bodies, where information about system variables and/or petrologic processes is limited.

Hawaii↗
USGS2011

Anatomy of a metabentonite: Nucleation and growth of illite crystals and their coalescence into mixed-layer illite/smectite

The illite layer content of mixed-layer illite/smectite (I/S) in a 2.5 m thick, zoned, metabentonite bed from Montana decreases regularly from the edges to the center of the bed. Traditional X-ray diffraction (XRD) pattern modeling using Markovian statistics indicated that this zonation results from a mixing in different proportions of smectite-rich R0 I/S and illite-rich R1 I/S, with each phase having a relatively constant illite layer content. However, a new method for modeling XRD patterns of I/S indicates that R0 and R1 I/S in these samples are not separate phases (in the mineralogical sense of the word), but that the samples are composed of illite crystals that have continuous distributions of crystal thicknesses, and of 1 nm thick smectite crystals. The shapes of these distributions indicate that the crystals were formed by simultaneous nucleation and growth. XRD patterns for R0 and R1 I/S arise by interparticle diffraction from a random stacking of the crystals, with swelling interlayers formed at interfaces between crystals from water or glycol that is sorbed on crystal surfaces. It is the thickness distributions of smectite and illite crystals (also termed fundamental particles, or Nadeau particles), rather than XRD patterns for mixed-layer I/S, that are the more reliable indicators of geologic history, because such distributions are composed of well-defined crystals that are not affected by differences in surface sorption and particle arrangements, and because their thickness distribution shapes conform to the predictions of crystal growth theory, which describes their genesis.

Montana↗
USGS2015

Progress on water data integration and distribution: a summary of select U.S. Geological Survey data systems

Critical water-resources issues ranging from flood response to water scarcity make access to integrated water information, services, tools, and models essential. Since 1995 when the first water data web pages went online, the U.S. Geological Survey has been at the forefront of water data distribution and integration. Today, real-time and historical streamflow observations are available via web pages and a variety of web service interfaces. The Survey has built partnerships with Federal and State agencies to integrate hydrologic data providing continuous observations of surface and groundwater, temporally discrete water quality data, groundwater well logs, aquatic biology data, water availability and use information, and tools to help characterize the landscape for modeling. In this paper, we summarize the status and design patterns implemented for selected data systems. We describe how these systems contribute to a U.S. Federal Open Water Data Initiative and present some gaps and lessons learned that apply to global hydroinformatics data infrastructure.

Journal of Hydroinformatics↗
USGS2012

Initiation of long-term coupled microbiological, geochemical, and hydrological experimentation within the seafloor at North Pond, western flank of the Mid-Atlantic Ridge

Integrated Ocean Drilling Program (IODP) Expedition 336 successfully initiated subseafloor observatory science at a young mid-ocean-ridge flank setting. All of the drilled sites are located in the North Pond region of the Atlantic Ocean (22°45′N, 46°05′W) in 4414–4483 m water depth. This area is known from previous ocean drilling and site survey investigations as a site of particularly vigorous circulation of seawater in permeable 8 Ma basaltic basement underlying a <300 m thick sedimentary pile. Understanding how this seawater circulation affects microbial and geochemical processes in the uppermost basement was the primary science objective of Expedition 336. Basement was cored and wireline-logged in Holes U1382A and U1383C. Upper oceanic crust in Hole U1382A, which is only 50 m west of Deep Sea Drilling Project (DSDP) Hole 395A, recovered 32 m of core between 110 and 210 meters below seafloor (mbsf). Core recovery in basement was 32%, yielding a number of volcanic flow units with distinct geochemical and petrographic characteristics. A unit of sedimentary breccia containing clasts of basalt, gabbroic rocks, and mantle peridotite was found intercalated between two volcanic flow units and was interpreted as a rock slide deposit. From Hole U1383C we recovered 50.3 m of core between 69.5 and 331.5 mbsf (19%). The basalts are aphyric to highly plagioclase-olivine-phyric tholeiites that fall on a liquid line of descent controlled by olivine fractionation. They are fresh to moderately altered, with clay minerals (saponite, nontronite, and celadonite), Fe oxyhydroxide, carbonate, and zeolite as secondary phases replacing glass and olivine to variable extents. In addition to traditional downhole logs, we also used a new logging tool for detecting in situ microbial life in ocean floor boreholes—the Deep Exploration Biosphere Investigative tool (DEBI-t). Sediment thickness was ~90 m at Sites U1382 and U1384 and varied between 38 and 53 m at Site U1383. The sediments are predominantly nannofossil ooze with layers of coarse foraminiferal sand and occasional pebble-size clasts of basalt, serpentinite, gabbroic rocks, and bivalve debris. The bottommost meters of sections cored with the advanced piston corer feature brown clay. Extended core barrel coring at the sediment/ basement interface recovered <1 m of brecciated basalt with micritic limestone. Sediments were intensely sampled for geochemical pore water analyses and microbiological work. In addition, high-resolution measurements of dissolved oxygen concentration were performed on the whole-round sediment cores Major strides in ridge-flank studies have been made with subseafloor borehole observatories (CORKs) because they facilitate combined hydrological, geochemical, and microbiological studies and controlled experimentation in the subseafloor. During Expedition 336, two fully functional observatories were installed in two newly drilled holes (U1382A and U1383C) and an instrument and sampling string were placed in an existing hole (395A). Although the CORK wellhead in Hole 395A broke off and Hole U1383B was abandoned after a bit failure, these holes and installations are intended for future observatory science targets. The CORK observatory in Hole U1382A has a packer seal in the bottom of the casing and monitors/samples a single zone in uppermost oceanic crust extending from 90 to 210 mbsf. Hole U1383C was equipped with a three-level CORK observatory that spans a zone of thin basalt flows with intercalated limestone (~70–146 mbsf), a zone of glassy, thin basaltic flows and hyaloclastites (146–200 mbsf), and a lowermost zone (~200–331.5 mbsf) of more massive pillow flows with occasional hyaloclastites in the upper part.

Integrated Ocean Drilling Program: Preliminary Rep↗
USGS2021

Leveraging existing technology: Developing a trusted digital repository for the U.S. Geological Survey

As Federal Government agencies in the United States pivot to increase access to scientific data (Sheehan, 2016), the U.S. Geological Survey (USGS) has made substantial progress (Kriesberg et al., 2017). USGS authors are required to make federally funded data publicly available in an approved data repository (USGS, 2016b). This type of public data product, known as a USGS data release, serves as a method for publishing reviewed and approved data. In this paper, we present major milestones in the approach the USGS took to transition an existing technology platform to a Trusted Digital Repository. We describe both the technical and the non-technical actions that contributed to a successful outcome.We highlight how initial workflows revealed patterns that were later automated, and the ways in which assessments and user feedback influenced design and implementation. The paper concludes with lessons learned, such as the importance of a community of practice, application programming interface (API)-driven technologies, iterative development, and user-centered design. This paper is intended to offer a potential roadmap for organizations pursuing similar goals.

International Journal of Digital Curation↗