USGS Science⌕ Search

SEARCH · USGS Science

Results for “Holocene”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources

High resolution seismic imaging of faults beneath Limón Bay, northern Panama Canal, Republic of Panama

High-resolution seismic reflection profiles from Limo??n Bay, Republic of Panama, were acquired as part of a seismic hazard investigation of the northern Panama Canal region. The seismic profiles image gently west and northwest dipping strata of upper Miocene Gatu??n Formation, unconformably overlain by a thin (<20 m) sequence of Holocene muds. Numerous faults, which have northeast trends where they can be correlated between seismic profiles, break the upper Miocene strata. Some of the faults have normal displacement, but on many faults, the amount and type of displacement cannot be determined. The age of displacement is constrained to be Late Miocene or younger, and regional geologic considerations suggest Pliocene movement. The faults may be part of a more extensive set of north- to northeast-trending faults and fractures in the canal region of central Panama. Low topography and the faults in the canal area may be the result of the modern regional stress field, bending of the Isthmus of Panama, shearing in eastern Panama, or minor deformation of the Panama Block above the Caribbean subduction zone. For seismic hazard analysis of the northern canal area, these faults led us to include a source zone of shallow faults proximal to northern canal facilities. ?? 2003 Elsevier B.V. All rights reserved.

Tectonophysics↗

An example of neotectonism in a continental interior - Thebes Gap, Midcontinent, United States

Some of the most intense neotectonic activity known in the continental interior of North America has been recently discovered on a fault zone in the Thebes Gap area, Missouri and Illinois. This faulting almost assuredly was accompanied by large earthquakes. The zone is located approximately 30 km north of the New Madrid seismic zone and consists of complex north-northeast- to northeast-striking, steeply dipping faults that have had a long-lived history of reactivation throughout most of the Phanerozoic. Geophysical studies by others suggest that the faults are rooted in the deeply buried Late Proterozoic and Early Cambrian Reelfoot rift system. Quaternary deposits are cut by at least four episodes of faulting, two of which occurred during the Holocene. The overall style of neotectonic deformation is interpreted as right-lateral strike-slip faulting. At many locations, however, near-surface displacements have stepped from one fault strand to another and produced normal and oblique-slip faults in areas of transtension and high-angle reverse faults, thrust faults, and folds in areas of transpression. There is evidence of reactivation of some near-surface fault segments during the great 1811-1812 New Madrid earthquakes. Quaternary faulting at Thebes Gap demonstrates that there are additional seismic-source zones in the Midcontinent, U.S., other than New Madrid, and that even in the absence of plate-margin orogenesis, intense neotectonic activity does occur over long time periods along crustal weakenesses in continental interiors.

Tectonophysics↗

Quaternary grabens in southernmost Illinois: Deformation near an active intraplate seismic zone

Narrow grabens displace Quaternary sediments near the northern edge of the Mississippi Embayment in extreme southern Illinois, east-central United States. Grabens are part of the Fluorspar Area Fault Complex (FAFC), which has been recurrently active throughout Phanerozoic time. The FAFC strikes directly toward the New Madrid Seismic Zone (NMSZ), scene of some of the largest intra-plate earthquakes in history. The NMSZ and FAFC share origin in a failed Cambrian rift (Reelfoot Rift). Every major fault zone of the FAFC in Illinois exhibits Quaternary displacement. The structures appear to be strike-slip pull-apart grabens, but the magnitude and direction of horizontal slip and their relationship to the current stress field are unknown. Upper Tertiary strata are vertically displaced more than 100 m, Illinoian and older Pleistocene strata 10 to 30 m, and Wisconsinan deposits 1 m or less. No Holocene deformation has been observed. Average vertical slip rates are estimated at 0.01 to 0.03 mm/year, and recurrence intervals for earthquakes of magnitude 6 to 7 are on the order of 10,000s of years for any given fault. Previous authors remarked that the small amount of surface deformation in the New Madrid area implies that the NMSZ is a young feature. Our findings show that tectonic activity has shifted around throughout the Quaternary in the central Mississippi Valley. In addition to the NMSZ and southern Illinois, the Wabash Valley (Illinois-Indiana), Benton Hills (Missouri), Crowley's Ridge (Arkansas-Missouri), and possibly other sites have experienced Quaternary tectonism. The NMSZ may be only the latest manifestation of seismicity in an intensely fractured intra-plate region.

Tectonophysics↗

Use of liquefaction-induced features for paleoseismic analysis

Liquefaction features can be used in many field settings to estimate the recurrence interval and magnitude of strong earthquakes through much of the Holocene. These features include dikes, craters, vented sand, sills, and laterally spreading landslides. The relatively high seismic shaking level required for their formation makes them particularly valuable as records of strong paleo-earthquakes. This state-of-the-art summary for using liquefaction-induced features for paleoseismic interpretation and analysis takes into account both geological and geotechnical engineering perspectives. The driving mechanism for formation of the features is primarily the increased pore-water pressure associated with liquefaction of sand-rich sediment. The role of this mechanism is often supplemented greatly by the direct action of seismic shaking at the ground surface, which strains and breaks the clay-rich cap that lies immediately above the sediment that liquefied. Discussed in the text are the processes involved in formation of the features, as well as their morphology and characteristics in field settings. Whether liquefaction occurs is controlled mainly by sediment grain size, sediment packing, depth to the water table, and strength and duration of seismic shaking. Formation of recognizable features in the field generally requires a low-permeability cap above the sediment that liquefied. Field manifestations are controlled largely by the severity of liquefaction and the thickness and properties of the low-permeability cap. Criteria are presented for determining whether observed sediment deformation in the field originated by seismically induced liquefaction. These criteria have been developed mainly by observing historic effects of liquefaction in varied field settings. The most important criterion is that a seismic liquefaction origin requires widespread, regional development of features around a core area where the effects are most severe. In addition, the features must have a morphology that is consistent with a very sudden application of a large hydraulic force. This article discusses case studies in widely separated and different geological settings: coastal South Carolina, the New Madrid seismic zone, the Wabash Valley seismic zone, and coastal Washington State. These studies encompass most of the range of settings and the types of liquefaction-induced features likely to be encountered anywhere. The case studies describe the observed features and the logic for assigning a seismic liquefaction origin to them. Also discussed are some types of sediment deformations that can be misinterpreted as having a seismic origin. Two independent methods for estimating prehistoric magnitude are discussed briefly. One method is based on determination of the maximum distance from the epicenter over which liquefaction-induced effects have formed. The other method is based on use of geotechnical engineering techniques at sites of marginal liquefaction, in order to bracket the peak accelerations as a function of epicentral distance; these accelerations can then be compared with predictions from seismological models.

Engineering Geology↗

Cyclic terpenoids of contemporary resinous plant detritus and of fossil woods, ambers and coals

Cyclic terpenoids present in the solvent extractable material of fossil woods, ambers and brown coals have been analyzed. The sample series chosen consisted of wood remains preserved in Holocene to Jurassic sediments and a set of of ambers from the Philippines (copalite), Israel, Canada and Dominican Republic. The brown coals selected were from the Fortuna Garsdorf Mine and Miocene formations on Fiji. The fossil wood extracts contained dominant diterpenoid or sesquiterpenoid skeletons, and aromatized species were present at high concentrations, with a major amount of two-ring aromatic compounds. Tricyclic diterpenoids were the predominant compounds in the ambers. Aromatized derivatives were the major components, consisting of one or two aromatic ring species with the abietane and occasionally pimarane skeletons. The saturated structures were comprised primarily of the abietane and pimarane skeletons having from three to five carbon (C 1 , C 2 , etc.) substituents. Kaurane and phyllocladane isomers were present in only minor amounts. Bicyclic sesquiterpenoids as saturated and partial or fully aromatized forms were also common in these samples, but only traces of sesterterpenoids and triterpenoid derivatives were found. The brown coal extracts were composed of major amounts of one- and two-ring aromatized terpenoids, with a greater proportion of triterpenoid derivatives than in the case of the woods and ambers. This was especially noticeable for the German coal, where the triterpenoids were predominant. Open C-ring aromatized structures were also present in this coal. Steroid compounds were not detectable, but some hopanes were found as minor components in the German brown coal. An overview of the skeletal structure classes identified in each sample, as well as the general mass spectrometric characteristics of the unknown compounds are included in the present paper. It can be concluded from these structural distributions that aromatization is the main process for the transformation of terrestrial cyclic terpenoids during diagenesis, constituting a general pathway for all terpenoids.

Organic Geochemistry↗

Recent formation of arroyos in the Little Missouri Badlands of southwestern North Dakota

In the Little Missouri Badlands of southwestern North Dakota, the channels of ephemeral streams are incised 2 to 10 m or more into mid-to-late Holocene alluvium. The objectives of this study were to determine the timing and cause(s) of the most recent episodes of fluvial incision and to develop a process-response model that illustrates the formation and evolution of arroyos in this region. The purpose was to distinguish natural from anthropogenic changes to the landscape and to discriminate allogenic from autogenic causes of incision, thereby gaining a greater sense of how steep, relatively small, ephemeral streams evolve. Dendrochronologic and dendrogeomorphic analyses of riparian cottonwoods provide an inexpensive, high-resolution dating method to constrain the time of incision, thereby permitting determination of the cause(s) of incision by evaluating environmental conditions prior to and at the onset of fluvial incision. An examination of seven small (10 to 100 km2) drainage basins indicated ephemeral streams have undergone a four-stage cycle of change within the past 200 years, comprising(i) an initial period of relative geomorphic stability with pedogenesis on the flood plain and low rates of lateral channel migration, (ii) a period of channel incision with subsequent widening of the flood plain through lateral corrasion along middle and upstream reaches, (iii) a concomitant period of aggradation along downstream reaches and, finally, (iv) a period of downstream incision. Dendrochronologic data and dendrogeomorphic relations indicate there have been three distinct periods of fluvial incision in the past 200 years. The first period of incision began in the 1860s and 1870s prior to the onset of European settlement and intensive grazing by domesticated cattle in the area. This period of incision occurred along the middle reaches of all seven of the streams examined and coincided with a severe, protracted drought, suggesting an allogenic cause. The second period of incision occurred during the end of the 19th century and into the 20th century along the upstream reaches of streams. This period of incision was mentioned in some written accounts of early settlers and coincided with the introduction of cattle and historical overgrazing of the region. However, overgrazing may not have caused the incision of this period, but instread exacerbated or accelerated the upstream migration of knickpoints formed earlier along middle reaches. A third period of incision has occurred in the past 20 years along the lower reaches of two of the seven streams examined. This incision was caused by the process of meander cutoff. This autogenic process decreases sinuosity and increases channel slope, stream power, and the potential to incise along adjacent stream reaches. ?? 2001 Elsevier Science B.V. All rights reserved.

Geomorphology↗

A comparison of factors controlling sedimentation rates and wetland loss in fluvial-deltaic systems, Texas Gulf coast

Submergence of coastal marshes in areas where rates of relative sea-level rise exceed rates of marsh sedimentation, or vertical accretion, is a global problem that requires detailed examination of the principal processes that establish, maintain, and degrade these biologically productive environments. Using a simple 210Pb-dating model, we measured sedimentation rates in cores from the Trinity, Lavaca-Navidad, and Nueces bayhead fluvial-deltaic systems in Texas where more than 2000 ha of wetlands have been lost since the 1950s. Long-term average rates of fluvial-deltaic aggradation decrease southwestward from 0.514 ?? 0.008 cm year -1 in the Trinity, 0.328 ?? 0.022 cm year -1 in the Lavaca-Navidad, to 0.262 ?? 0.034 cm year -1 in the Nucces. The relative magnitudes of sedimentation and wetland loss correlate with several parameters that define the differing fluvial-deltaic settings, including size of coastal drainage basin, average annual rainfall, suspended sediment load, thickness of Holocene mud in the valley fill, and rates of relative sea-level rise. There is some evidence that upstream reservoirs have reduced wetland sedimentation rates, which are now about one-half the local rates of relative sea-level rise. The extant conditions indicate that fluvial-deltaic marshes in these valleys will continue to be lost as a result of submergence and erosion. ?? 2002 Elsevier Science B.V. All rights reserved.

Geomorphology↗

Regional controls on geomorphology, hydrology, and ecosystem integrity in the Orinoco Delta, Venezuela

Interacting river discharge, tidal oscillation, and tropical rainfall across the 22,000 km2 Orinoco delta plain support diverse fresh and brackish water ecosystems. To develop environmental baseline information for this largely unpopulated region, we evaluate major coastal plain, shallow marine, and river systems of northeastern South America, which serves to identify principal sources and controls of water and sediment flow into, through, and out of the Orinoco Delta. The regional analysis includes a summary of the geology, hydrodynamics, sediment dynamics, and geomorphic characteristics of the Orinoco drainage basin, river, and delta system. Because the Amazon River is a major source of sediment deposited along the Orinoco coast, we summarize Amazon water and sediment input to the northeastern South American littoral zone. We investigate sediment dynamics and geomorphology of the Guiana coast, where marine processes and Holocene history are similar to the Orinoco coast. Major factors controlling Orinoco Delta water and sediment dynamics include the pronounced annual flood discharge; the uneven distribution of water and sediment discharge across the delta plain; discharge of large volumes of water with low sediment concentrations through the Rio Grande and Araguao distributaries; water and sediment dynamics associated with the Guayana littoral current along the northeastern South American coast; inflow of large volumes of Amazon sediment to the Orinoco coast; development of a fresh water plume seaward of Boca Grande; disruption of the Guayana Current by Trinidad, Boca de Serpientes, and Gulf of Paria; and the constriction at Boca de Serpientes. ?? 2002 Elsevier Science B.V. All rights reserved.

Geomorphology↗

Stratigraphy and palaeoclimatic significance of Late Quaternary loess-palaeosol sequences of the Last Interglacial-Glacial cycle in central Alaska

Loess is one of the most widespread subaerial deposits in Alaska and adjacent Yukon Territory and may have a history that goes back 3 Ma. Based on mineralogy and major and trace element chemistry, central Alaskan loess has a composition that is distinctive from other loess bodies of the world, although it is quartz-dominated. Central Alaskan loess was probably derived from a variety of rock types, including granites, metabasalts and schists. Detailed stratigraphic data and pedologic criteria indicate that, contrary to early studies, many palaeosols are present in central Alaskan loess sections. The buried soils indicate that loess sedimentation was episodic, or at least rates of deposition decreased to the point where pedogenesis could keep ahead of aeolian input. As in China, loess deposition and pedogenesis are likely competing processes and neither stops completely during either phase of the loess/soil formation cycle. Loess deposition in central Alaska took place before, and probably during the last interglacial period, during stadials of the mid-Wisconsin period, during the last glacial period and during the Holocene. An unexpected result of our geochronological studies is that only moderate loess deposition took place during the last glacial period. Our studies lead us to conclude that vegetation plays a key role in loess accumulation in Alaska. Factors favouring loess production are enhanced during glacial periods but factors that favour loess accumulation are diminished during glacial periods. The most important of these is vegetation; boreal forest serves as an effective loess trap, but sparsely distributed herb tundra does not. Thus, thick accumulations of loess should not be expected where tundra vegetation was dominant and this is borne out by modern studies near the treeline in central Alaska. Much of the stratigraphic diversity of North American loess, including that found in the Central Lowlands, the Great Plains, and Alaska is explained by a new model that emphasizes the relative importance of loess production factors versus loess accumulation factors.

Quaternary Science Reviews↗

A diatom record of climate and hydrology for the past 200 KA from Owens Lake, California with comparison to other Breat Basin records

Diatoms from lake sediments beneath Owens Lake playa, Inyo County, California, document a nearly continuous paleolimnological record of climate and hydrologic change since the penultimate glacial-interglacial cycle based on a chronology established by radiocarbon, tephrochronology, and paleomagnetic control. Freshwater planktic diatoms (especially species of Stephanodiscus), plagioclase feldspar-rich sediments with high magnetic susceptibility, and Juniperus-type pollen characterized the penultimate glaciation at Owens Lake. Saline diatoms dominated in the following interglacial period, and there are several episodes during which freshwater planktic diatoms became abundant between 100 and 50 ka that may represent interstadial climatic conditions. Saline diatoms fell to low values after 50 ka, but warm-season Aulacoseira species indicate episodes of significant summer precipitation in the hydrologic balance of Owens Lake prior to the last glacial maximum. By 25 ka, glacial environments were again characterized by abundant Juniperus, plagioclase feldspar, and Stephanodiscus species. Generally and Holocene climates were recorded in Owens Lake by short-term fluctuations of saline and freshwater diatoms, desiccation, and oolitic sediments barren of diatoms. Comparison to paleoclimate records both north and south of Owens Lake suggest a southerly displacement of storm tracks originating from the Aleutian Low during glacial episodes.

Quaternary Science Reviews↗

Paleoclimate simulations for North America over the past 21,000 years: Features of the simulated climate and comparisons with paleoenvironmental data

Maps of upper-level and surface winds and of surface temperature and precipitation illustrate the results of a sequence of global paleoclimatic simulations spanning the past 21,000 yr for North America. We review (a) the large-scale features of circulation, temperature, and precipitation that appear in the simulations from the NCAR Community Climate Model Version 1 (CCM 1), (b) the implications of the simulated climate for the past continental-scale distributions of three plant taxa ( Picea spp., Pseudotsuga menziesii , and Artemisia tridentata ), which are broadly representative of the vegetation across the continent, and (c) the potential explanations in terms of atmospheric circulation or surface energy- and water-balance processes for mismatches between the simulations and observations. Most of the broad-scale features of previous paleoclimatic simulations with the NCAR CCM 0 for North America are present in the current simulations. Many of the elements of a conceptual model (based on previous climate simulations) that describes the controls of paleoclimatic variations across North America during the past 21,000 yr are found in simulations reviewed here. These include (1) displacement of the jet stream by the Laurentide Ice Sheet to the south of its present position in both winter and summer, (2) generation of a ‘glacial anticyclone’ over the ice sheet at the LGM, and the consequent induction of large-scale sinking motions induced over eastern North America, (3) changes in the strength of surface atmospheric circulation features through time, including weakening of the Aleutian low in winter, and strengthening of the eastern Pacific and Bermuda high-pressure systems in summer as the ice sheet decreased in size, (4) development of a ‘heat low’ at the surface and a strengthened ridge in the upper-atmosphere over the continent at the time of the maximum summer insolation anomaly, (5) increases in summer temperature earlier in regions remote from the ice sheet (these increases appear earlier in the present (CCM 1) simulations than in the previous (CCM 0) ones, however), and (6) continuation of negative winter temperature anomalies into the middle Holocene. In general, simulated surface conditions that are discordant with paleoenvironmental observations can be attributed to the simulation of particular atmospheric circulation patterns (e.g. those that suppress precipitation or advect warm air into a region), with these mismatches amplified in Beringia and the southeastern United States by surface energy- and water-balance processes.

Quaternary Science Reviews↗

Lake-level history of Lake Michigan for the past 12,000 years: the record from deep lacustrine sediments

Collection and analysis of an extensive set of seismic-reflection profiles and cores from southern Lake Michigan have provided new data that document the history of the lake basin for the past 12,000 years. Analyses of the seismic data, together with radiocarbon dating, magnetic, sedimentologic, isotopic, and paleontologic studies of core samples, have allowed us to reconstruct lake-level changes during this recent part of the lake's history. The post-glacial history of lake-level changes in the Lake Michigan basin begins about 11.2 ka with the fall from the high Calumet level, caused by the retreat of the Two Rivers glacier, which had blocked the northern outlet of the lake. This lake-level fall was temporarily reversed by a major influx of water from glacial Lake Agassiz (about 10.6 ka), during which deposition of the distinctive gray Wilmette Bed of the Lake Michigan Formation interrupted deposition of red glaciolacustrine sediment. Lake level then continued to fall, culminating in the opening of the North Bay outlet at about 10.3 ka. During the resulting Chippewa low phase, lake level was about 80 m lower than it is today in the southern basin of Lake Michigan. The rise of the early Holocene lake level, controlled primarily by isostatic rebound of the North Bay outlet, resulted in a prominent, planar, transgressive unconformity that eroded most of the shoreline features below present lake level. Superimposed on this overall rise in lake level, a second influx of water from Lake Agassiz temporarily raised lake levels an unknown amount about 9.1 ka. At about 7 ka, lake level may have fallen below the level of the outlet because of sharply drier climate. Sometime between 6 and 5 ka, the character of the lake changed dramatically, probably due mostly to climatic causes, becoming highly undersaturated with respect to calcium carbonate and returning primary control of lake level to the isostatically rising North Bay outlet. Post-Nipissing (about 5 ka) lake level has fallen about 6 m due to erosion of the Port Huron outlet, a trend around which occurred relatively small (± ∼2 m), short-term fluctuations controlled mainly by climatic changes. These cyclic fluctuations are reflected in the sed-imentological and sediment-magnetic properties of the sediments.

Indiana, Illinois, Michigan, Wisconsin↗

Biogenic silica in Lake Baikal sediments: results from 1990-1992 American cores

The Lake Baikal Paleoclimate Project is a joint Russian-American program established to study the paleoclimate of Central Asia. During three summer field seasons, duplicate Russian and American cores were taken at a number of sites in different sedimentary environments in the lake. Eight cores returned to the U.S. were quantitatively analyzed for biogenic silica using a single-step 5-hour alkaline leach, followed by dissolved silicon analysis by inductively-coupled-plasma atomic-emission spectroscopy. Sediments of Holocene age in these cores have biogenic silica maxima that range from about 15 to 80 percent. An underlying zone in each core with low biogenic-silica concentrations (0 to 5 percent) dates from the last glacial maximum. The transition from the last glaciation to the present interglaciation, recorded by biogenic silica, began about 13,000 years ago. Biogenic silica profiles from these cores appear to be a good measure of past diatom productivity and a useful basis for paleoclimatic interpretations.

Lake Baikal↗

The geohydrologic setting of Yucca Mountain, Nevada

This paper provides a geologic and hydrologic framework of the Yucca Mountain region for the geochemical papers in this volume. The regional geologic units, which range in age from late Precambrian through Holocene, are briefly described. Yucca Mountain is composed of dominantly pyroclastic units that range in age from 11.4 to 15.2 Ma. The principal focus of study has been on the Paintbrush Group, which includes two major zoned and welded ash-flow tuffs separated by an important hydrogeologic unit referred to as the Paintbrush non-welded (PTn). The regional structural setting is currently one of extension, and the major local tectonic domains are presented together with a tectonic model that is consistent with the known structures at Yucca Mountain. Streamflow in this arid to semi-arid region occurs principally in intermittent or ephemeral channels. Near Yucca Mountain, the channels of Fortymile Wash and Amargosa River collect infrequent runoff from tributary basins, ultimately draining to Death Valley. Beneath the surface, large-scale interbasin flow of groundwater from one valley to another occurs commonly in the region. Regional groundwater flow beneath Yucca Mountain originates in the high mesas to the north and returns to the surface either in southern Amargosa Desert or in Death Valley, where it is consumed by evapotranspiration. The water table is very deep beneath the upland areas such as Yucca Mountain, where it is 500-750 m below the land surface, providing a large thickness of unsaturated rocks that are potentially suitable to host a nuclear-waste repository. The nature of unsaturated flow processes, which are important for assessing radionuclide migration, are inferred mainly from hydrochemical or isotopic evidence, from pneumatic tests of the fracture systems, and from the results of in situ experiments. Water seeping down through the unsaturated zone flows rapidly through fractures and more slowly through the pores of the rock matrix. Although capillary forces are expected to divert much of the flow around repository openings, some may drip onto waste packages, ultimately causing release of radionuclides, followed by transport down to the water table. ?? 2002 Elsevier Science Ltd. All rights reserved.

Applied Geochemistry↗

Medieval Warm Period, Little Ice Age and 20th century temperature variability from Chesapeake Bay

We present paleoclimate evidence for rapid (< 100 years) shifts of ~2-4 o C in Chesapeake Bay (CB) temperature ~2100, 1600, 950, 650, 400 and 150 years before present (years BP) reconstructed from magnesium/calcium (Mg/Ca) paleothermometry. These include large temperature excursions during the Little Ice Age (~1400-1900 AD) and the Medieval Warm Period (~800-1300 AD) possibly related to changes in the strength of North Atlantic thermohaline circulation (THC). Evidence is presented for a long period of sustained regional and North Atlantic-wide warmth with low-amplitude temperature variability between ~450 and 1000 AD. In addition to centennial-scale temperature shifts, the existence of numerous temperature maxima between 2200 and 250 years BP (average ~70 years) suggests that multi-decadal processes typical of the North Atlantic Oscillation (NAO) are an inherent feature of late Holocene climate. However, late 19th and 20th century temperature extremes in Chesapeake Bay associated with NAO climate variability exceeded those of the prior 2000 years, including the interval 450-1000 AD, by 2-3 o C, suggesting anomalous recent behavior of the climate system.

Maryland↗

Tectonic framework and Late Cenozoic tectonic history of the northern part of Cyprus: Implications for earthquake hazards and regional tectonics

Located near the triple junction of the African, Arabia, and Eurasian Plate, Cyprus has had an active and complex neotectonic history, which includes devastating historical earthquakes. Investigations into the tectonic framework of the northern part of Cyprus provide important insights into regional tectonism of the Eastern Mediterranean and Middle East. The northern part of Cyprus is divided into two tectono-stratigraphic terranes, the boundary of which is the Ovgos fault zone. In the Middle Miocene, the Ovgos fault zone was a marine platform margin, which separated open-marine platform carbonates from deep-marine turbidites. Transpressive movement along easterly and northeasterly trending structures dominated the Late Miocene; deposition and preservation of Messinian evaporites occurred in grabens at intersections of these trends. N–S compression began in the Early Pliocene and produced contractional tectonism along east–west trends, including major thrusting of allochthonous rocks in the Kyrenia Range. Quaternary deformation has been dominated by strike-slip faults along northeast and northwest trends; movement during the Pleistocene occurred on several of these faults; Holocene movement is documented on one of these faults. A seismic hazard is implied for the Nicosia area because its proximity to the Quaternary faults. Since the Miocene, Cyprus has been continuously uplifted, but the tectonic setting is controversial, as some researchers invoke a subduction zone setting and others ascribe to a regime of strike-slip tectonics. Our neotectonic framework is consistent with a restraining bend model for Cyprus in a regional strike-slip regime.

Journal of Asian Earth Sciences↗

Chapter 8 Petrogenesis and mineralogic residence of selected elements in the meade peak phosphatic shale member of the permian phosphoria formation, Southeast Idaho

The Meade Peak Phosphatic Shale Member of the Permian Phosphoria Formation hosts the ore mined by the phosphate industry of southeast Idaho. It also hosts environmentally sensitive elements (ESE) such as Se, As, Hg, Ni, Cd, Zn, and Cr. Primary chemistry, elemental distribution patterns, and mineralogy within the Meade Peak were modified by element migration and possibly the introduction of elements. Fluids moved within the Meade Peak throughout its history, although the passage of fluids was highly variable in space and time, resulting in small domains of different rock chemistry and different mineralogy. Timing of major events affecting the Meade Peak and mineral habit are used to differentiate among detrital, diagenetic, epigenetic, and supergene mineral assemblages. Cross-cutting relationships among minerals are too rare to provide much paragenetic infor- mation. Carbonate fluorapatite (CFA) occurs in several forms, but dominantly as pelloids, some of which may have formed in situ during diagenesis. The other volumetrically signifi- cant form of CFA is interstitial cement that formed during diagenesis. Beginning during diagenesis and continuing intermittently, multiple generations of carbonate (dolomite and calcite) formed overgrowths and texturally complex carbonate cements. Movement and precipitation of silica followed a similar pattern. The ammonium feldspar buddingtonite, which generally rims orthoclase, also formed during diagenesis. Bacteria apparently played a significant role during diagenesis as well as during supergene processes, resulting in extreme fractionation of S isotopes and the possible bacterially mediated formation of minerals such as glauconite and sphalerite. Catagenesis, apparently culminating in oil generation, was the last significant diagenetic change. Thrusting accompanied by fluid (oil and brine) migration began during catagenesis in the Late Jurassic or Cretaceous and continued into the early Eocene. Fluorite ± carbonate ± barite± bitumen veins formed as a result of brittle deformation and accompanying fluid movement. This fracturing event may have been associated with a period of extension and normal faulting (Neogene to Holocene). Passage of the Yellowstone hot spot to the north of the area during the Neogene is marked by silicic domes and basaltic flows. The enrichment of Hg in fracture coatings might be the result of deposition from warm fluids associated with the emplacement of the silicic domes or a generally elevated, regional thermal gradient associated with the volcanism. Many of the fracture systems are still open and continue to provide fluid pathways that are the primary depositional sites for a wide variety of supergene minerals (such as Se, efflorescent salts) and element associations (such as Hg, Cd-S, Fe-Cr-O) in which many of the ESE are concentrated. Native Se is the most commonly identified host of Se in the studied samples. The largest concentration of Se occurs in open-fracture systems that cross-cut waste rock and ore units. The age(s) of native Se formation is not known; how- ever, the latest period of Se mobility is the present. Direct measurement of efflorescent “salts” forming on new mine faces indicate that several ESE, including both Se and Zn, are concentrated on the faces soon after they are exposed. Zinc is present as hydrous sulfates, but the residence of Se in these “salts” is unknown.

Idaho↗

Volcano hazards

Not only do “Volcanoes assail the senses …” (Decker and Decker, 1997, p. vii), but they also assail the environment when they erupt, terrifying and fascinating humankind for countless millennia. Volcanic processes and products – beneficial and hazardous – have profoundly impacted and continue to impact society (Chester, 1993, Chapter 14, this volume). It is estimated that about 10% of the world's population live within proximity of active and potentially active volcanoes. With projected population growth, by the twenty-first century more than 500 million people could be at risk from volcano hazards (Peterson, 1986; Tilling and Lipman, 1993). Of these half billion people at risk, roughly equal to the estimated entire world population at the beginning of the seventeenth century, about 90% live in the circum-Pacific region. Also in the twenty-first century, with continued increasing urbanization there will be more than 100 cities with greater than 2 million population, and many of these will be located within 200 km of volcanically active subduction zones (McGuire, 1995a, Fig. 15.1). Over 1500 subaerial volcanoes have been active during the Holocene (i.e., the past 10,000 years), and more than a third of these have erupted one or more times during recorded history (Simkin and Siebert, 1994). Active or potentially active volcanoes occur in narrow belts that collectively comprise less than 1% of the Earth's total surface area, dotting the divergent and convergent boundaries between the tectonic plates and above well-documented intraplate “hot spots,” such as Hawaii and the Galapagos (Simkin et al. , 1994).

Book chapter↗