USGS Science⌕ Search

SEARCH · USGS Science

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources
USGS1984

Characterization and geochemistry of Devonian oil shale North Alabama - South Central Tennessee

Based on the physical and chemical data obtained to date, the Devonian oil shale rock of north Alabama and south-central Tennessee appears to offer an attractive potential for future resource development. The shale rock appears to have formed in a restrictive marine environment which provided opportunity for the accumulation of marine organic matter to form sufficient kerogen. The shale contains approximately 18% to 22% organic matter which is primarily kerogen. The kerogen has a relatively high H:C ratio indicative of an alginite and/or exinite source (Type 1 and Type II kerogen) and a high proportion of alkane and saturated ring hydrocarbons. However, a few samples have low H:C ratio values and are interpreted to have been formed in a shallow water oxidizing environment. Also, there is a possibility that these low H:C values may represent mixtures of terrestrial and marine organic material suggesting lateral facies changes of the rock from marine to near shore depositional environments. Trace metal values for both the whole rock and the shale oil fraction indicate a generally high V:Ni ratio, also indicative of a marine environment. Other trace metal values are in good agreement with data from other Devonian shales. Throughout the north Alabama and south-central Tennessee study area, the average oil yield from the shale is 13.9 gallon per ton. The highest oil yield values were obtained from the middle and upper parts of the shale sequence. Based on the crude oil composition diagram (11), the Alabama-Tennessee shale oil is classified as a aromatic-intermediate oil Estimated reserves of inplace shale oil resources in the principal study area, under less than 200 feet of overburden, exceeds 12.5 billion barrels.

Conference Paper↗
USGS1986

Paleontology and deposition of the Phosphoria Formation.

The Phosphoria Formation and related rocks were deposited in an interior sag basin developed in the Cordilleran miogeocline of western North America. Deposition can be characterized as a fringing bank complex on a carbonate ramp. Conodont-brachiopod biostratigraphy provides a sufficient relative time framework for correlation of the many units. These age correlations and the distribution of fossils, plus the biofacies of conodonts and brachiopods in particular, indicate that phosphate deposition was a cool-water, deeper ramp facies that transgressed over the carbonate bank twice, representing the Meade Peak and Retort Phosphatic Shale Members of the Phosphoria Formation. Conodont data that substantiate the above are presented, and a new genus and species, Sweetina triticum, is described. -Authors

Contributions to Geology - University of Wyoming, ↗
USGS1986

CHARACTERIZATION OF SANDSTONE RESERVOIRS FOR ENHANCED OIL RECOVERY: THE PERMIAN UPPER MINNELUSA FORMATION, POWDER RIVER BASIN, WYOMING.

Upper Minnelusa sandstones form a complex group of reservoirs because of variations in regional setting, sedimentology, and diagenetic alteration. Structural lineaments separate the reservoirs into northern and southern zones. Production in the north is from a single pay sand, and in the south from multi-pay sands due to differential erosion on top of the Upper Minnelusa. The intercalation of eolian dune, interdune, and sabkha sandstones with marine sandstones, carbonates, and anhydrites results in significant reservoir heterogeneity. Diagenetic alterations further enhance heterogeneity, because the degree of cementation and dissolution is partly facies-related.

Conference Paper↗
USGS1989

New evidence for polyphase metamorphism of glaucophane schist and eclogite exotic blocks in the Franciscan Complex, California and Oregon

The early metamorphic history of high-grade exotic blocks in the Franciscan Complex may be more complicated than previously supposed. The different assemblages of high-grade glaucophane schists, eclogite, amphibolite and hornblende schist are commonly considered to have formed at the same time from essentially unmetamorphosed oceanic crust. However, new textural and mineralogical data presented here suggest that high-grade glaucophane schist and eclogite have replaced an earlier epidote-amphibolite facies assemblage that is identical to the primary assemblages in many of the hornblende-rich blocks. At least some of the hornblende-rich blocks may therefore be well-preserved remnants of the earlier metamorphism. Comparison of the mineral assemblages and element partititioning in the mixed-assemblage blocks suggests that the glaucophane schist and eclogite metamorphism took place at slightly lower temperatures but at the same or higher pressures than the earlier, hornblende-forming stage. -Authors

Journal of Metamorphic Geology↗
USGS1990

Patrick Draw field, Wyoming - 1 seismic expression of subtle strat trap in Upper Cretaceous Almond

The east flank of the Rock Springs uplift and the adjacent Wamsutter arch contain several large hydrocarbon accumulations. Among these accumulations are Patrick Draw field, which produces oil and gas from a stratigraphic trap in the Upper Cretaceous Almond formation, and Table Rock field, a faulted anticlinal trap that produces gas from multiple Tertiary, Mesozoic, and Paleozoic reservoirs. The principal petroleum reservoir in Patrick Draw field is a sandstone at the top of the Almond formation. This sandstone attains a maximum thickness of 35ft and piches out westward into relatively impervious silt-stone and shale that constitute the trapping facies. The objective of this investigation is to determine whether or not the stratigraphic trap at Patrick Draw can be detected on a 12 fold, common depth point seismic profile acquired by Forest Oil Corp. and its partners. The seismic line is 18.5 miles long and crosses Patrick Draw and Table Rock fields.

Wyoming↗
USGS1990

Characterization of carbon in sediment-hosted disseminated gold deposits, north central Nevada

The gray, dark gray and black colors of the sediments and the presence of pyrite in the Carlin, Jerritt Canyon, Horse Canyon, Betze, and Gold Acres sediment-hosted disseminated gold (SHDG) deposits indicate that these rocks are not oxidized with respect to carbon and iron sulfide. The organic matter in the host rocks of SHDG deposits in north-central Nevada is cryptocrystalline graphite with dimensions of 30 to 70 A (0.003 to 0.007 ??) that was formed at temperatures of 250 to 300??C. These results indicate that north-central Nevada was subjected to pumpellyite-actinolite to lowermost greenschist facies conditions prior to mineralization. The hydrothermal fluids that produced the gold deposits had little, if any, effect on the thermal maturity and crystallinity of the cryptocrystalline graphite produced by the earlier thermal event.

Conference Paper↗
USGS1994

Integrated geology and preliminary cross section along the north ramp of the Exploratory Studies Facility, Yucca Mountain

The Exploratory Studies Facility is a major part of the site characterization activities at Yucca Mountain, Nevada, and the north ramp is the first phase of construction. The N61W trending north ramp will transect the Bow Ridge and Drill Hole Wash faults and numerous minor faults, and traverses two thick welded tuffs and several nonwelded tuff units. A preliminary cross section along the north ramp was created by integration of geologic map relations, lithostratigraphic data from core collected from boreholes, and surface and borehole geophysical data. The Bow Ridge fault is a west-dipping normal fault with about 410 feet of dip-slip separation. East-dipping strata in the hanging wall adjacent to the fault is contrary to early structural interpretations. West of the Bow Ridge fault the ramp might traverse about 220??65 feet of nonlithified tuffaceous material. Geometry of the Drill Hole Wash fault is not known, but is modeled in part as two strands that juxtapose different thicknesses and facies of formations with a complex sense of movement.

Conference Paper↗
USGS1993

Development of 3-D lithostratigraphic and confidence models at Yucca Mountain, Nevada

Computerized three-dimensional geologic models of potential high-level nuclear waste repositories such as Yucca Moutain, Nevada, are important for visualizing the complex interplay of (1) thickness and facies variations in lithostratigraphic units and (2) the disruption of these units by faults. The concept of a 'model of confidence' in the lithostratigraphic model is introduced to show where data are located versus regions where interpolations are included. Models of confidence can be based on (1) expert judgment, (2) geostatistical analysis, or (3) a simplified combination of these two methods. Linking of lithostratigraphic models and models of confidence provide guidelines for future characterization and modeling activities, as well as for design and construction of the Exploratory Studies Facility.

Conference Paper↗
USGS1996

Remote mineralogic and lithologic mapping of the Ice River alkaline complex, British Columbia, Canada, using AVIRIS data

The Ice River Alkaline Complex is a late Paleozoic intrusion of mafic alkaline rocks, syenite, and carbonatite exposed in southeastern British Columbia, Canada. The complex intrudes Cambrian and Ordovician shales, slates, and limestones of the Chancellor and Ottertail Formations and the McKay Group. We examined the alkaline complex and adjacent country rocks using Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) data. The data were first calibrated to relative reflectance and then used to spectrally map mineralogies in the study area by using a linear spectral unmixing program. This technique models each pixel spectrum in an AVIRIS image as a linear combination of unique endmember spectra. We selected endmember spectra from well-exposed and spectrally distinct mineralogic units, vegetation, and snow. Four of the endmembers reflect mineralogic variations within the McKay group in the study area, and may represent lateral and vertical variations of sedimentary or metamorphic facies. Otherwise, the resultant spatial distribution of endmembers shows generally close agreement with the published geologic map, although, in several places, our image-map is more accurate than the published map.

Photogrammetric Engineering and Remote Sensing↗
USGS1996

Mn-rich ilmenite from the Sullivan Pb-Zn-Ag deposit, British Columbia

Electron-microprobe analyses of 76 ilmenite grains from 13 locations in the footwall, hanging wall, and ore zone of the Sullivan Pb-Zn-Ag deposit, Kimberley, British Columbia, and from regionally developed tourmalinite of the Middle Proterozoic Aldridge Formation show two different modes that reflect two stages of formation. The first stage of ilmenite formation occurred as a result of greenschist-facies regional metamorphism, which also produced the associated Mn-rich garnet. Ilmenite from this stage forms inclusions within garnet and has a relatively low Mn content (<5.5 wt% MnO), owing to the preferential partitioning of Mn into the garnet. A second metamorphic or hydrothermal event resulted in the formation of ilmenite-bearing veinlets (+ chlorite + quartz + sulfides) that cut garnet and associated biotite. This latter type of ilmenite has a higher Mn content (up to 16.7 wt% MnO) that reflects remobilization of Mn within the local environment. Both types of Mn-rich ilmenite are considered to be derived from Mn originally concentrated in pools of dense brine that formed during synsedimentary, submarine-exhalative mineralization.

Canadian Mineralogist↗
USGS1996

A giant sediment trap in the Florida keys

Aerial photography, high-resolution seismic profiling, coring and jet probing have revealed a large sediment-filled sinkhole in the Key Largo National Marine Sanctuary off Key Largo, Florida. The 600-m-diameter feature straddles coral reef and carbonate-sand facies and contains >55 m of marine lime sand and aragonite mud. Bulk 14C age determinations of mud from a 30- m sediment core indicate infilling rates exceeding 20 m/ka between 3 and 5.6 ka. The total thickness and nature of the sediment near the base of the sinkhole are not known.

Journal of Coastal Research↗
USGS1997

Shifting sources and transport paths for the late Quaternary Escanaba Trough sediment fill (northeast Pacific)

Escanaba Trough, which forms the southernmost part of the axial valley of the actively spreading Gorda Ridge, is filled with several hundred meters of sediment of presumed late Quaternary age. Surficial sediment samples from gravity cores, deeper samples (as much as 390 m) from Site 35 of the Deep Sea Drilling Program (Leg 5), and the acoustic character of the sediment fill observed on seismic-reflection profiles indicate that much of the sediment fill is of turbidite origin. Gross composition and heavy- mineral analyses of sand samples show that two distinct petrofacies comprise the sediment fill. The lower part of the fill was derived primarily from the Klamath River source of northern California while the younger fill, including the surficial sand beds, are from the Columbia River drainage much farther north. The Escanaba Trough sediment provides an opportunity to evaluate concepts for paleogeographic and paleotectonic reconstructions that are based on facies analysis and compositional and textural data for the volcanic components because both intrabasinal and extrabasinal sources are present as well as coeval (neovolcanic) and non coeval (paleovolcanic) sourcre This study of a modern basin shows, that although the sediment sources could be identified, it was useful to have some knowledge of the sediment pathway(s), the effects of diagenesis, and the possible effects of sediment sorting as a result of long transport distances from the source area for some components. Application of these same techniques to ancient deposits without benefit of the additional parameters will face limitations.

Giornale di Geologia↗
USGS1998

Petrofacies Analysis - A Petrophysical Tool for Geologic/Engineering Reservoir Characterization

Petrofacies analysis is defined as the characterization and classification of pore types and fluid saturations as revealed by petrophysical measurements of a reservoir. The word "petrofacies" makes an explicit link between petroleum engineers' concerns with pore characteristics as arbiters of production performance and the facies paradigm of geologists as a methodology for genetic understanding and prediction. In petrofacies analysis, the porosity and resistivity axes of the classical Pickett plot are used to map water saturation, bulk volume water, and estimated permeability, as well as capillary pressure information where it is available. When data points are connected in order of depth within a reservoir, the characteristic patterns reflect reservoir rock character and its interplay with the hydrocarbon column. A third variable can be presented at each point on the crossplot by assigning a color scale that is based on other well logs, often gamma ray or photoelectric effect, or other derived variables. Contrasts between reservoir pore types and fluid saturations are reflected in changing patterns on the crossplot and can help discriminate and characterize reservoir heterogeneity. Many hundreds of analyses of well logs facilitated by spreadsheet and object-oriented programming have provided the means to distinguish patterns typical of certain complex pore types (size and connectedness) for sandstones and carbonate reservoirs, occurrences of irreducible water saturation, and presence of transition zones. The result has been an improved means to evaluate potential production, such as bypassed pay behind pipe and in old exploration wells, or to assess zonation and continuity of the reservoir. Petrofacies analysis in this study was applied to distinguishing flow units and including discriminating pore type as an assessment of reservoir conformance and continuity. The analysis is facilitated through the use of colorimage cross sections depicting depositional sequences, natural gamma ray, porosity, and permeability. Also, cluster analysis was applied to discriminate petrophysically similar reservoir rock.

AAPG Memoir↗
USGS1998

Paragenesis and chemistry of multistage tourmaline formation in the sullivan Pb-Zn-Ag deposit, British Columbia

Detailed petrographic study, scanning electron microscope imaging, and electron microprobe analyses of tourmalines from the Sullivan Pb-Zn-Ag massive sulfide deposit (British Columbia, Canada) document multiple paragenetic stages and large compositional variations. The tourmalines mainly belong to two common solid-solution series: dravite-schorl and dravite-uvite. Ca- and Fe-rich feruvite and alkali-deficient tourmalines are present locally. Products of tourmaline-forming stages include (from oldest to youngest): (1) rare Fe-rich dravite-schorl within black tourmalinite clasts in footwall fragmental rocks; (2) widespread Mg-rich, very fine grained, felted dravite in the footwall (the main type of tourmaline in the footwall tourmalinite pipe); (3) recrystallized, Fe-rich dravite-schorl (locally Ca-Fe feruvite) in the tourmalinite pipe, which preferentially occurs near postore gabbroic intrusions; (4) Mg-rich dravite or uvite associated with chlorite-pyrrhotite and chlorite-albite-pyrite-altered rocks in the shallow footwall and hanging wall; (5) discrete Mg-rich tourmaline grains associated with chlorite and discordant Mg-rich tourmaline rims which occur on disseminated Fe-rich schorl in the bedded Pb-Zn-Ag ores. The timing of rare Fe-rich schorl in the bedded ores is uncertain, but it most likely occurred during or between stages 2 and 3. The different paragenetic stages and their respective tourmaline compositions are interpreted in terms of a multistage evolution involving contributions from: (1) variable mixtures of synsedimentary, Fe-rich hydrothermal fluids and entrained seawater; (2) postore, Fe-rich, gabbro-related hydrothermal fluids; and (3) postore metamorphic reactions. Early synsedimentary, Fe-rich hydrothermal fluids which contained little or no entrained seawater formed Fe-rich black tourmalinite clasts locally in the footwall. The major type of tourmaline in the footwall tourmalinite pipe is Mg rich, recording seawater entrainment under high water/rock conditions, rather than control by the chemical composition of the original host sediments. Rare Fe-rich schorl within the bedded Pb-Zn-Ag ores is believed to have formed on the sea floor by reaction of an Fe-rich brine pool with detrital aluminous sediments. Postore emplacement of gabbro sills and local dikes in the footwall produced Fe-rich hydrothermal fluids, which were responsible for formation of minor Fe-rich dravite-schorl which overprinted earlier dravite. Postore, but synsedimentary, hydrothermal alteration involving entrained seawater was responsible for deposition of dravite and uvite in the hanging wall and for dravite in the brown tourmalinites of the shallow footwall. Mg-rich dravite-uvite associated with chlorite and in discordant rims on schorl in the bedded ores formed by sulfide-silicate reactions during greenschist facies regional metamorphism.

Economic Geology↗
USGS1998

The ichnogenus Curvolithus revisited

The ichnogenus Curvolithus Fritsch, 1908, originally described from the Ordovician of the Prague Basin, typically comprises ribbonlike or tonguelike, flattened, endostratal traces with three rounded lobes on the upper surface. However, considerable confusion persists regarding the ichnotaxonomic status and diagnostic features of its ichnospecies. The type specimens of this ichnotaxon, overlooked in most subsequent reports, are redescribed herein. Curvolithus multiplex Fritsch, 1908, the type species, is retained for specimens with a trilobate upper surface and a quadralobate lower surface, in contrast to the criteria adopted by subsequent authors. The other ichnospecies originally proposed from the type locality, C. gregarius Fritsch, 1908, actually consists of a series of grouped parallel scratch marks forming ridges and should be removed from Curvolithus. Subsequently, four ichnospecies were defined: C.? davidis Webby 1970; C. annulatus Badve and Ghare 1978; C. aequus Walter et al. 1989; and C. manitouensis Maples and Suttner 1990. Curvolithus? davidis shows the typical trilobation of Curvolithus apparently in its lower surface, but the morphology of the upper surface is uncertain. Accordingly, it does not warrant ichnospecific assessment, and is regarded as a nomen dubium. The nature of the annulations on the trilobate upper surface of C. annulatus is unclear, and this ichnospecies is also best considered as a nomen dubium. Curvolithus aequus has a bilobate lower surface and probably represents washed out specimens of Didymaulichnus. Finally, C. manitouensis comprises specimens with a smooth, trilobate upper surface and a smooth, quadralobate lower surface, and is best regarded as a junior synonym of C. multiplex. Curvolithus multiplex has been used incorrectly for Curvolithus with a trilobate upper surface and a trilobate to unilobate lower surface. The new ichnospecies, Curvolithus simplex, is proposed herein for such traces. Curvolithus is interpreted as a locomotion trace (Repichnia) of endostratal carnivores, possibly gastropods, flatworms, or nemerteans. Curvolithus is a component of the Cruziana ichnofacies in shallow-marine facies, either of normal salinity or slightly brackish, in the latter case typically associated with fan deltas.

Journal of Paleontology↗
USGS2000

Stage boundary recognition in the Eastern Americas realm based on rugose corals

Most Devonian stages contain characteristic coral assemblages but these tend to be geographically and facies limited and may or may not be useful for recognising stage boundaries. Within eastern North America, corals contribute to the recognition of two boundaries: the base of the Lochkovian (Silurian-Devonian boundary) and the base of the Eifelian (Lower-Middle Devonian Series boundary).

CFS Courier Forschungsinstitut Senckenberg↗
USGS2000

Determination of geochemical affinities of granitic rocks from the Aue-Schwarzenberg zone (Erzgebirge, Germany) by multivariate statistics

Variscan granites of the Erzgebirge region can be effectively classified into five genetically distinct major groups by canonical analysis of geochemical variables. The same classification procedure, when applied to small plutons in the Aue-Schwarzenberg granite zone (ASGZ), shows that all ASGZ granites have compositional affinities to low-F biotite or low-F two-mica granite groups. This suggests that the ASGZ granites were emplaced during the first, late-collisional stage of silicic magmatism in the region, which occurred between about 325 and 318 Ma. The numerous biotite granite bodies in the zone are geochemically distinct from both the neighboring Kirchberg granite pluton and the spatially displaced Niederbobritzsch biotite granite massif. Instead, these bodies seem to constitute a third sub-group within the low-F biotite granite class. The ASGZ biotite granites represent three or more genetically distinct bodies, thus highlighting the enormous compositional variability within this group of granites. Least evolved samples of two-mica granites from the ASGZ apparently reflect the assimilation of low-grade metamorphic country rocks during emplacement, altering the original composition of the melts by enhancing primary Al content. The same genesis is implied for the rare "cordierite granite" facies of the Bergen massif, the type pluton for the low-F two-mica granite group in the Erzgebirge.

Neues Jahrbuch fur Mineralogie, Monatshefte↗
USGS2001

The crazy hollow formation (Eocene) of central Utah

The Late Eocene Crazy Hollow Formation is a fluviatile and lacustrine unit that was deposited locally in the southwest arm of Lake Uinta during and after the last stages of the lake the deposited the Green River Formation. Most exposures of the Crazy Hollow are located in Sanpete and Sevier Counties. The unit is characterized by a large variety of rock types, rapid facies changes within fairly short distances, and different lithofacies in the several areas where outcrops of the remnants of the formation are concentrated. Mudstone is dominant, volumetrically, but siltstone, shale, sandstone, conglomerate and several varieties of limestone are also present. The fine-grained rocks are mostly highly colored, especially in shades of yellow, orange and red. Sand grains, pebbles and small cobbles of well-rounded black chert are widespread, and "salt-and-pepper sandstone" is the conspicuous characteristic of the Crazy Hollow. The salt-and-pepper sandstone consists of grains of black chert, white chert, quartz and minor feldspar. The limestone beds and lenses are paludal and lacustrine in origin; some are fossiliferous, and contain the same fauna found in the Green River Formation. With trivial exceptions, the Crazy Hollow Formation lies on the upper, limestone member of the Green River Formation, and the beds of the two units are always accordant in attitude. The nature of the contact differs locally: at some sites there is gradation from the Green River to the Crazy Hollow; at others, rocks typical of the two units intertongue; elsewhere there is a disconformity between the two. A variety of bedrock units overlie the Crazy Hollow at different sites. In the southeasternmost districts it is overlain by the late Eocene formation of Aurora; in western Sevier County it is overlain by the Miocene-Pliocene Sevier River Formation; in northernmost Sanpete County it is overlain by the Oligocene volcanics of the Moroni Formation. At many sites bordering Sanpete and Sevier Valleys the Crazy Hollow beds dip beneath Quaternary sediments that fill the two valleys. The Crazy Hollow Formation ranges from 0 to 1,307 feet (0-398 m) thick in the region, but is usually much thinner than the maximum value. At most outcrops it is only a few scores of feet (12-50 m) thick. Its age is middle Eocene, for it is only a little younger than the underlying Green River Formation. The unit developed by the washing of detritus into the basin of the southwest arm of Lake Uinta from the various source rocks in the highlands surrounding the basin. The limestone beds and lenses formed in ponds and small lakes that developed in the basin from time to time during and following the draining and evaporation of Lake Uinta. The qualities of the Crazy Hollow Formation are described in detail for 10 different areas of outcrops in the Sanpete and Sevier Valleys and vicinity.

Brigham Young University Geology Studies↗