USGS Science⌕ Search

SEARCH · USGS Science

Results for “Economic Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources

Preliminary lead isotope investigations of brine from the Red Sea, Galena from the Kingdom of Saudi Arabia, and galena from United Arab Republic (Egypt)

The isotopic composition of lead in Red Sea chloride brine containing 0.5 ppm Pb is found to be similar to that of some Cenozoic ore leads such as galena at Rabigh in Saudi Arabia that may have formed during mineralization accompanying Tertiary rifting. Bir Ranga galena in Miocene sediments from United Arab Republic (Egypt) is also isotopically similar to lead in Red Sea brine. The chlorine brine must be considered a possible mineralizing fluid. Lead isotopes show promise for use in mineral prospect evaluation in that galena from Samrah is isotopically similar to that from Mahd adh Dhahab, which has been the only ore producer in Saudi Arabia since 1945. Drilling at Samrah does indicate a possible economic mineralization. The lead isotope data coupled with available geologic knowledge and geochronometry are used to tentatively divide the ore prospects of the Kingdom of Saudi Arabia into relative categories of mineralization age. Two Mesozoic and Cenozoic mineralizations are distinguished on the basis of a 207 Pb/ 204 Pb difference; an early Paleozoic mineralization grouping is outlined; and a late Precambrian mineralization period is suggested.

Earth and Planetary Science Letters↗

The quality of our Nation's waters: Water quality in the glacial aquifer system, northern United States, 1993-2009

The glacial aquifer system underlies much of the northern United States. About one-sixth (41 million people) of the United States population relies on the glacial aquifer system for drinking water. The primary importance of the glacial aquifer system is as a source of water for public supply to the population centers in the region, but the aquifer system also provides drinking water for domestic use to individual homes and small communities in rural areas. Withdrawals from this aquifer system for public supply are the largest in the Nation and play a key role in the economic development of parts of 26 States. Corn production has increased in the central part of the aquifer system over the last 10 years, and the increased production increases the need for water for agricultural use and the need for increased use of agrochemicals. Additionally, the steady increase in population (15 million people over the last 40 years) in urban and rural areas is resulting in an increased reliance on the glacial aquifer system for high-quality drinking water. The need to monitor, understand, and maintain the water quality of this valuable economic resource continues to grow. Major Findings Contaminants from geologic source—in particular arsenic and manganese—in groundwater used for drinking are a potential concern for human health Concentrations of nitrate and pesticides in groundwater were low in fine-grained sediment even in areas of intensive agriculture Chloride concentrations in groundwater are increasing in urban areas “Nuisance” constituents in groundwater from the glacial aquifer system could limit groundwater use

Circular↗

Biological and ecological science for Montana—The Treasure State

Montana is rich in minerals, energy, and soils, as well as prairies, forests, mountains, rivers, lakes, fish, and wildlife. Many enterprises that drive the economy are based on natural resources, including tourism, hunting, fishing, agriculture, and energy development. The outdoor-recreation economy alone supports 64,000 Montana jobs and generates nearly \$6 billion each year in economic activity.

Montana↗

Water resources of the Cedar River watershed, southeastern Minnesota

The Cedar River Watershed Unit (as established by the states of Minnesota) consists of 1,204 square miles (3,118 square kilometres) of flat or gently undulating plain. The watershed is drained by the Cedar River and several smaller streams that flow south into Iowa and eventually into the Mississippi River. Its easternmost neck is part of a broad, flat, well-drained plain, covered by a thin sheet of glacial drift. Sinkholes have formed in the near surface carbonate bedrock, and a karst topography is developing. Farther north, along the east boundary, the drift is more than 200 feet (61 m) thick, and the land surface reaches altitudes of more than 1,450 feet (442 m) – the highest area in southeastern Minnesota. In the central part of the watershed in the southern flood plain of the Cedar River, the drift is less than 100 feet (30 m) thick, and the land surface altitude is less than 1,140 feet (347 m). The western part is dominated by a terminal moraine of the last Wisconsin glacier. Here the drift is more than 300 feet (91 m) thick, is poorly drained, and has numerous lakes. The watershed is mostly prairie and is well suited for farming, which is the dominant economic activity. Topographic quadrangle maps published by the U.S. Geological Survey are available for the entire watershed.

Minnesota↗

Estimated water requirements for gold heap-leach operations

This report provides a perspective on the amount of water necessary for conventional gold heap-leach operations. Water is required for drilling and dust suppression during mining, for agglomeration and as leachate during ore processing, to support the workforce (requires water in potable form and for sanitation), for minesite reclamation, and to compensate for water lost to evaporation and leakage. Maintaining an adequate water balance is especially critical in areas where surface and groundwater are difficult to acquire because of unfavorable climatic conditions [arid conditions and (or) a high evaporation rate]; where there is competition with other uses, such as for agriculture, industry, and use by municipalities; and where compliance with regulatory requirements may restrict water usage. Estimating the water consumption of heap-leach operations requires an understanding of the heap-leach process itself. The task is fairly complex because, although they all share some common features, each gold heap-leach operation is unique. Also, estimating the water consumption requires a synthesis of several fields of science, including chemistry, ecology, geology, hydrology, and meteorology, as well as consideration of economic factors.

Open-File Report↗

Fundamentals of carbon dioxide-enhanced oil recovery (CO 2 -EOR): a supporting document of the assessment methodology for hydrocarbon recovery using CO 2 -EOR associated with carbon sequestration

The objective of this report is to provide basic technical information regarding the CO 2 -EOR process, which is at the core of the assessment methodology, to estimate the technically recoverable oil within the fields of the identified sedimentary basins of the United States. Emphasis is on CO 2 -EOR because this is currently one technology being considered as an ultimate long-term geologic storage solution for CO 2 owing to its economic profitability from incremental oil production offsetting the cost of carbon sequestration.

Open-File Report↗

Water resources appraisal of the Anchorage area, Alaska

At the present, water use in the Anchorage area amounts to about 21 mgd (million gallons per day); of this amount ground water accounts for about 10 mgd. By 1980, 60 mgd may be required to meet the demand. The greatest potential problem is overpumping the ground-water reservoir resulting in excessive declines in water levels, which, in turn, might lead to salt-water intrusion. A well-laid plan for conjunctive use of surface and ground water seems to be the most promising means of supplying the expected need of 60 mgd, and of preventing saltwater intrusion of the aquifers. Total inflow into the Anchorage hydrologic system amounts to about 180 mgd. Of this amount Ship and South Fork Campbell Creeks contribute about 130 mgd, North Fork Campbell Creek and other streams contribute an estimated 24 mgd, and precipitation and ground-water inflow contribute an estimated 26 mgd. Of the total outflow, which must be equivalent to the inflow, Ship and Chester Creeks contribute about 94 mgd, Campbell Creek about 25 mgd, and ground-water pumpage contributes an assumed amount of approximately 10 mgd. The difference of 50 mgd between inflow and outflow presumably is accounted for; by submarine discharge beneath Cook Inlet and evapotranspiration. Surface and subsurface storage of excess stream discharge during periods of high flow can overcome the problem of water shortages during periods of greatest demand. Surface storage can be accomplished by construction of an additional dam on Ship Creek. Natural ground-water storage can be supplemented by spreading techniques to increase the amount of ground-water recharge. Additional recharge can be provided by returning air-conditioning water to the aquifer through recharge wells. Recharge along the coastline would be a means of maintaining a fresh-water barrier against salt-water intrusion. The area with the greatest potential for ground-water development is along Ship Creek east and north of Mountain View. The alluvial fan east of Mountain View seems favorable for installation of deep wells; and withdrawal of ground water in this area is not likely to result in salt-water intrusion. Similar favorable conditions exist in the alluvial fan areas of North and South Forks Campbell Creek. Infiltration galleries in alluvial deposits along Ship Creek are a relatively inexpensive and convenient means of withdrawing water. To plan for orderly and economical development of the Anchorage area's water resources, geologic and hydrologic studies are needed. An expanded network of stream-gaging stations and observation wells is needed. Deep wells near the coastline are needed to monitor any changes in chemical quality of ground water that would indicate impending salt-water intrusion. Borehole geophysical studies and pumping tests are needed to define the boundaries and hydraulic characteristics of the aquifers. The primary goal of these and other supplementing studies would be to provide the information needed to construct an electric-analog model of the Anchorage hydrologic system. Such a model would provide a means of assessing quantitatively alternative methods of water development.

Alaska↗

Digital data in support of studies and assessments of coal and petroleum resources in the Appalachian basin

The Appalachian basin is a mature basin containing abundant oil, gas, and coal resources. Its fossil-fuel-bearing strata range in age from Cambrian to Permian and extend over the States of New York, Pennsylvania, Maryland, Ohio, West Virginia, Virginia, Kentucky, Tennessee, Georgia, and Alabama. The basin has provided abundant fossil fuels to support the Nation’s economic growth for at least 150 years and U.S. Geological Survey (USGS) assessments suggest that substantial untapped resources remain. A merger of new and old geologic data and ideas is required to locate and extract those remaining resources. This chapter brings together abundant existing datasets in a common and integrated spatial format to advance our understanding of the distribution, geologic framework, burial history, and geochemical character of the basin’s oil, gas, and coal resources. These datasets support the information and findings in chapters B through G of this volume, which include (1) geologic cross sections, seismic profiles, and burial history models that document the depositional and structural framework of the basin; (2) assessments of Carboniferous coal-bed gas and Devonian shale gas; (3) studies about the distribution of oil, gas, and coal fields and the geochemistry of natural gas and oil; and (4) a history of fossil-fuel production in the basin. The data that supported these studies were refined and made more accessible using geographic information system (GIS) tools. The following types of data are included: (1) the bedrock geology of States included within the boundary of the Appalachian basin, (2) the locations of oil and gas wells and fields, (3) data produced for the National Oil and Gas Assessment, and (4) the stratigraphy, geochemistry, and production of coal. Data layers are available in shapefile and Zipped Keyhole Markup Language (KMZ) formats, which can be viewed using ArcGIS, Google Earth, or any software package that supports these data formats. Metadata for these datasets are available in HTML and XML formats. Metadata files contain information about the sources of data used to create the dataset, the creation process steps, the data quality, the geographic coordinate system and horizontal datum used for the dataset, the values of attributes used in the dataset table, information about the publication and the publishing organization, and other information that may be useful to the reader. All links in the metadata were valid at the time of compilation. Some of these links may no longer be valid. No attempt has been made to determine the new online location (if one exists) for the data.

Appalachian basin↗

Preliminary report on the economic potential of the Chattanooga Shale in Tennessee, data as of 1962

The Geological Survey?s investigations of the Chattanooga shale in Tennessee and adjacent states on behalf of the U.S. Atomic Energy Commission consisted mostly of geologic studies and routine analyses of samples for uranium. In the course of the studies, however, other investigations were made, primarily to find answers to specific problems that arose from time to time. The large amount of analytical and related data obtained is here reported, with sufficient explanatory material to bring the data into proper perspective. Although the Survey has not made a comprehensive overall study of the geology, geochemistry, mineralogy, and petrography of the shale, sufficient information has been obtained to provide a sound basis for possible mining and processing of the shale in the future.

Open-File Report↗

Sustainable growth in America's heartland: 3-D geologic maps as the foundation

The Central Great Lakes States of Illinois, Indiana, Michigan, and Ohio constitute one of the most productive and economically important regions in the country—America’s heartland. The agriculture, industry, business, recreation, and ecology of these States are based on a common geologic heritage. During the last 1.8 million years, glaciers repeatedly advanced and retreated across the region, leaving behind a thick, complex blanket of intermixed layers of mud, clay, silt, sand, and gravel. These glacial deposits contain bountiful resources—rich soils; plentiful ground water; minerals for construction; land for agriculture, development, recreation, and wildlife habitat; and lakes and rivers for recreation and wildlife habitat. These materials are also subject to natural hazards—floods, erosion, landslides, radon, and earthquakes—and manmade problems such as soil, sediment, and water contamination from point and nonpoint sources. Resulting land degradation has impaired and restricted human use and enjoyment of the land and caused degradation and loss of wildlife habitat. The continued economic growth of the region and the security of its population and environment are related to fundamental issues involving land, water, mineral, and biological resources. Addressing the conflicting demands on these resources without adequate information can result in land-use decisions that are not compatible with sustainable development and a continued high quality of life for future generations. Decisionmakers need knowledge of the glacial deposits— their characteristics, three-dimensional (3-D) distribution, and thickness. To provide this knowledge, a coalition of State and Federal Geological Surveys (Illinois State Geological Survey, Indiana Geological Survey, Michigan Geological Survey Division, Ohio Division of Geological Survey, U.S. Geological Survey) has formed to conduct the necessary studies in these four States to depict the 3-D nature of these glacial and related deposits and to interpret these data in cooperation with the user community for specific societal needs.

Illinois, Indiana, Michigan, Ohio↗

Ground-water levels in Wyoming, 1976 through 1985

Groundwater levels are measured periodically in a network of 84 observation wells in Wyoming, mostly in areas where groundwater is used in large quantities for irrigation or municipal purposes. The program is conducted by the U.S. Geological Survey in cooperation with the Wyoming State Engineer and the Wyoming Economic Development and Stabilization Board. This report contains hydrographs for 84 observation wells showing water-level fluctuations from 1976 through 1985. Also included in the report are maps showing locations of observation wells and tables listing well depths, use of water, geologic source, records available, and highest and lowest water levels for the period of record. (USGS)

Open-File Report↗

Ground-water levels in Wyoming, 1978 through September 1987

Groundwater levels are measured periodically in a network of 95 observation wells in Wyoming, mostly in areas where groundwater is used in large quantities for irrigation or municipal purposes. The program is conducted by the U.S. Geological Survey in cooperation with the Wyoming State Engineer and the Wyoming Economic Development and Stabilization Board. This report contains hydrographs for 95 observation wells showing water level fluctuations from 1978 through September 1987. Also included in the report are maps showing locations of observation wells and tables listing well depths, use of water, geologic source, records available, and highest and lowest water levels for the period of record. (USGS)

Open-File Report↗

Status report: USGS coal assessment of the Powder River Basin, Wyoming

Summary: This publication reports on the status of the current coal assessment of the Powder River Basin (PRB) in Wyoming and Montana. This slide program was presented at the Energy Information Agency's 2006 EIA Energy Outlook and Modeling Conference in Washington, DC, on March 27, 2006. The PRB coal assessment will be the first USGS coal assessment to include estimates of both regional coal resources and reserves for an entire coal basin. Extensive CBM and additional oil and gas development, especially in the Gillette coal field, have provided an unprecedented amount of down-hole geological data. Approximately 10,000 new data points have been added to the PRB database since the last assessment (2002) which will provide a more robust evaluation of the single most productive U.S. coal basin. The Gillette coal field assessment, including the mining economic evaluation, is planned for completion by the end of 2006. The geologic portion of the coal assessment work will shift to the northern and northwestern portions of the PRB before the end of 2006 while the Gillette engineering studies are finalized.

Wyoming↗

Economic comparison of two types of automatic water-quality monitors

A comparison of the U.S. Geological Survey's minimonitor system with a self-contained, 'package-sensor' system indicates that the package-sensor system requires less servicing time. The U.S. Geological Survey minimonitor is powered by an external battery and is housed in a weatherproof shelter. This instrument measures temperature, specific conductance, dissolved oxygen, and pH by means of sensors with extension cables having underewater connectors; data are recorder in binary coded decimal form on a 16-channel punched-paper-tape recorder that is housed in a shelter. The packaged-sensor system also measures temperature, specific conductanoe,dissolved oxygen, and pH by means of sensors housed in a package that is submerged in the stream. It has an internal power supply, no moving parts, anf does not require a weatherproof shelter; data are stored in solid-state memory. Minimonitors were installed at four sites in Ohio where U.S. Geological Survey flowthrough monitors already were in opertion. Two package-sensor systems also assigned to each site and alternated every 2 weeks. Detailed records were kept of (1) time involved in operation and maintenace of the systems, and (2) equipment problems during the test period, which lasted from October 1985 through September 1986. Equipment costs were not considered in the economic evaluation. Results of the comparisons show that the packaged-sensor system required less time to install, operate, and maintain than the minimonitor system.

Water-Resources Investigations Report↗

Peralkaline and peraluminous granites and related mineral deposits of the Arabian Shield, Kingdom of Saudi Arabia

In the Precambrian Arabian Shield, granitoid plutonic rocks are widespread and range in age from 800 to 550 Ma old; but the mineral-resource potential associated with these plutonic rocks is restricted mainly to the younger, postorogenic granites. Two granite types of current economic interest are zirconium- niobium-enriched per alkaline granites and tin-tungsten-enriched peraluminous granites. Both types are highly evolved, are enriched in lithium, rubidium, and fluorine, and have distinctive mineralogy, textures, and chemistry. The zirconium-niobium-enriched granites are related to medium- to large-sized plutons and complexes of peralkaline granite, and the tin-tungsten-enriched granites are related to medium-sized plutons of biotite or biotite-muscovite granite. Existing geochemical and geologic data for many parts of the Arabian Shield were compiled as a basis for evaluating the resource potential of the granites of the Shield. Commodities associated with granites that have potential for economic mineral deposits include tin, tungsten, molybdenum, beryllium, niobium, tantalum, zirconium, uranium, thorium, rare-earth elements, and fluorite. Prospecting methods useful in discriminating those granites having significant economic potential include reconnaissance geologic mapping, petrographic and mineralogic studies, geochemical sampling of rock and wadi sediment, and radiometric surveying.

Open-File Report↗

United States mineral resources

The work on this volume began in January 1972, but in a broader sense its production began many years ago. The chapters were written by geologists most of whom have had many years of experience studying the geology of mineral deposits, and more particularly the commodities about which they have written here. A total of nearly 2,300 man-years of professional experience in the geology of mineral resources is represented by the authors of the volume, and about 30 man-years went directly into its preparation. Each chapter contains not only a synthesis of the state of knowledge of the geology of the commodity, but also an appraisal of the known resources, and an examination of the geologic possibilities for finding additional deposits. In January 1972, responsibility for the preparation of the volume was assigned to us as co-editors, and we were given a tentative list of commodities and authors. We provided each author with a suggested outline of general topics to be covered, and some guidelines as to scope and philosophy of approach, but beyond that we avoided any attempt to fit each chapter into a stereotype. Moreover, the types of commodities range from the major metals and industrial minerals such as copper, silver, and fluorspar, which have been the subject of geologic research for years, to other commodities that are of such varied geologic nature (such as pigments or gemstones) or of such minor present importance (such as scandium or thallium) that they cannot be treated from the same viewpoint as the major minerals. The chapters range, therefore, from comprehensive summary reports to general essays that reflect the individuality of the authors as well as the variation among commodities. Throughout the book the emphasis is on geology, but each chapter contains some summary information on uses, technology, and economics. These summaries are not meant to be exhaustive, however, and additional details are in the 1970 edition of "Mineral Facts and Problems" (Bulletin 650 of the U.S. Bureau of Mines) ; indeed, we regard that book and the present volume as being complementary. In the examination of the geologic possibilities for finding new deposits-in many respects the principal innovative contributions of this volume-we asked the authors to frankly apply the limits of their ingenuity and not only to summarize current theories but also to express their own intuitive ideas, however speculative and unconventional they may seem, that have come from years of study devoted to the origin of mineral deposits. Readers will see that some authors have speculated more courageously than others. In any case, we believe readers will find all the chapters interesting, and many stimulating; and a few we believe can be frankly characterized as intellectually exciting. Most chapters include a section on prospecting techniques, and a summary of geologic or related problems on which the authors believe research might be most fruitful in the continuing efforts to find new resources. An integral part of the book is the bibliographic material cited at the conclusion of each chapter, in lieu of repetition of detailed descriptions already in print. Index and "spot" maps are not included in most chapters because they are available elsewhere, and in many cases with more detail than could possibly be included here. Maps showing the distribution of known deposits of many commodities in the United States are available in the Mineral Resource (MR) map series of the U.S. Geological Survey and in the National Atlas of the United States. The first three chapters deal not with resources of specific commodities but with general information that is pertinent to the study of mineral resources. In the introductory chapter we discuss the purposes of the book, the distinctions between reserves and various categories of resources, and some general conclusions drawn from our view of the book in its entirety. In the second chapter V. E. McKelvey discusses the problems of mineral-resource estimates and public policy. In the third chapter, R. L. Erickson discusses some new points of view on the relation of reserves and resources to the crustal abundance of elements. We acknowledge with thanks the cooperation of our colleagues in all phases of the preparation of this volume. Whatever success the book may attain is due entirely to a total effort. A paragraph of acknowledgment originally submitted as a part of the chapter on "Nuclear fuels" is given here instead because we feel it applied to all chapters: "The writers have drawn freely from published information, not all of which is cited, and from their colleagues, none of whom are given specific credit. The reader should be aware that the paper could not have been written without these sources." We extend specific thanks to Michael Fleischer for preparation of summaries of geochemical information that are included in many chapters.

Professional Paper↗

Water use, availability, and net demand in the Tennessee River watershed within Alabama, 2005

The U.S. Geological Survey worked in cooperation with the Alabama Department of Economic and Community Affairs—Office of Water Resources to estimate water use and water availability for 2005 for the portion of the Tennessee River watershed contained within the borders of the State of Alabama. Estimates of water use and availability are an important part of planning for population and economic growth in the Tennessee River watershed in Alabama. Total water use for the region in 2005 was 5,197 million gallons per day (Mgal/d). Total surface-water withdrawals were 5,139 Mgal/d, and total groundwater withdrawals were about 58 Mgal/d. About 92 percent of the total water withdrawn was surface water used for once-through cooling for thermoelectric power generation. Self-supplied industrial and public-supply water uses accounted for the next greatest uses of water, constituting approximately 49 and 42 percent, respectively, of the total water use excluding thermoelectric power use. Summaries of water use by county and subbasin indicated the areas of greatest water withdrawals and use within the Tennessee River watershed. Limestone (2,012 Mgal/d), Jackson (1,498 Mgal/d), and Colbert (1,363 Mgal/d) Counties were the counties with the greatest total water use in 2005 and had large amounts of water withdrawn for thermoelectric power generation. When water use from thermoelectric power generation was not considered, the counties with the greatest withdrawals were Morgan (124 Mgal/d), Madison (72 Mgal/d), Colbert (69 Mgal/d), and Lawrence (67 Mgal/d). The subbasin with the greatest total water use was Wheeler Lake (2,260 Mgal/d) in the Middle Tennessee—Elk subregion. Wheeler Lake subbasin also had the greatest public-supply, irrigation, industrial, mining, and thermoelectric withdrawals of any subbasin in the Tennessee River watershed within Alabama. Total water availability for the Tennessee River watershed within Alabama was estimated to be 34,567 Mgal/d by the Geological Survey of Alabama. Net water demand for the watershed was calculated by subtracting the Tennessee Valley Authority estimates of return flow from water withdrawals. The net water demand was 136 Mgal/d, which is less than 1 percent of the estimated water available.

Alabama↗

Flood damage costs beyond buildings—A Lake Champlain case study

Introduction Floods account for more than 75 percent of Federal disaster declarations and lead other natural disasters in economic costs. Early-warning systems have lowered flood-related fatalities, but costs continue to rise as flood-prone areas continue to be urbanized (U.S. Geological Survey, 2006). A Lake Champlain case study shows that at moderate flood heights, the economic costs of non-structural damages or losses—such as temporary lodging, residential debris removal, commercial revenue losses, and road repair—can be greater than economic damages to buildings. For unprecedented flood heights, non-structural damages can still total more than 10 percent of structural damage costs.

New York, Vermont↗