USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth, Planets and Space”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 69Linked to original sources
USGS2024

Joint pilot fish habitat framework

This story map will take you through the process of exploring and testing methods necessary for a higher resolution, seamless fish habitat assessment across both inland and estuarine waters through the lens of our joint pilot assessment Fish habitat assessments attempt to relate past, current, or future landscape conditions to the state of fish species occurrence, distribution, abundance, or community and habitat condition in streams, rivers, or estuaries. Previous fish habitat assessments, such as the National Fish Habitat Assessment, conducted separate and disconnected assessments for inland waters and estuaries. In this project, National Oceanic and Atmospheric Administration ( NOAA ) and U.S. Geological Survey ( USGS ) researchers created a seamless spatial framework to allow assessments that integrate influences on fish habitat from headwaters to the estuary. This effort began when the Chesapeake Bay Program Fish Habitat Action Team expressed interest in a Baywide fish habitat assessment spanning tidal salt, tidal fresh, warm non-tidal, and cold non-tidal waters. However, the complexity of the myriad of implementation details to consider when developing such an assessment necessitated the need for a tributary-specific pilot assessment. To conduct this pilot assessment, a NOAA/USGS joint partnership was formed with cooperation and support from the Chesapeake Bay Agreement and Chesapeake Bay Fish Habitat Action Team (FHAT).

Maryland↗
USGS2025

A framework for understanding the effects of subsurface agricultural drainage on downstream flows

Understanding controls on streamflow volume and magnitude is important to water resource management applications, such as critical water and transportation structure design and floodplain mapping. Changes in land use and agricultural practices, such as subsurface agricultural drainage, may be contributing to changes in streamflow characteristics. Subsurface agricultural drainage, also known as tile drainage, is the practice of installing drains in the subsurface of agricultural fields to improve productivity. Because of the complex interactions between subsurface drainage systems, precipitation, local soil conditions, and land management practices, it is difficult to determine how subsurface agricultural drainage affects downstream flow. Previously developed subsurface agricultural drainage conceptual models under dry, saturated, and winter conditions are summarized, and current literature on the effects of subsurface agricultural drainage on downstream flows, focusing on peak flow, non-event flow, and total flow to develop frameworks for discussing these systems is compiled. The effects that subsurface drainage has on hydrologic systems are expected to vary by site and are seasonally based on system design, soil type, moisture conditions, precipitation characteristics, and land conditions. Subsurface drainage can affect the magnitude of peak flow by converting surface runoff from a storm event to subsurface runoff. By increasing hydrologic connectivity of a catchment, subsurface drainage can increase non-event flow or the flow between two storm events, typically dependent on lateral flow through the subsurface and groundwater. Theoretically, by diverting water from groundwater recharge or by reducing water available for evapotranspiration, subsurface drainage may increase the total volume of flow. Precipitation changes may increase infiltration, excess overland flow, and flood risk regardless of the presence or absence of subsurface drainage.

Illinois, Iowa, Michigan, Minnesota, Missouri, Mon↗
USGS2025

Assessment of density pattern retention of generalized data for 1:100,000-scale United States topographic maps

Cartographic generalization reduces the complexity of geographic data to produce legible, smaller-scale displays that retain essential information and logical geographic patterns. Generalization is a vital process in topographic map production. An important challenge in this process is managing and evaluating consistency across scale in the density and spatial distribution of map features such as buildings, roads, streams, water bodies, and elevation contours. Density patterns in these features reflect underlying physiographic conditions, which include factors such as bedrock geology, tectonics, climate, and landforms. Assessments of an acceptable level of change in feature density patterns are critical to ensuring the readability, usability, and accuracy of generalized maps and data. Preserving realistic density patterns across mapping scales also supports sustainable development goals in cartography, by helping to prioritize and communicate the relative reliability of geospatial data at specific scales.

Conference Paper↗
USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗
USGS2026

Cnidarian–algal partnerships structure bacterial communities during strobilation in Cassiopea xamachana

Cnidarian–algal (Symbiodiniaceae) symbioses rely on complex interactions among the cnidarian host, algal symbionts, and associated bacterial communities. In the upside-down jellyfish Cassiopea xamachana , the polyp-to-medusa transition (strobilation) requires the establishment of symbiosis with Symbiodiniaceae algal partners, yet bacterial community dynamics during this developmental process remain unknown. Here, we experimentally induced symbiosis in aposymbiotic polyps using four algal treatments: xenic Symbiodinium microadriaticum (native symbiont), xenic Breviolum minutum , antibiotic-treated B. minutum , and a photosynthetically impaired B. minutum mutant. We combined 16S rRNA gene sequencing with measurements of photosynthetic efficiency, asexual budding, and algal surface N-glycan profiles to characterize holobiont assembly during symbiosis onset and strobilation. Algal treatment structured bacterial communities in both algal cultures and polyp tissues. Our analyses identified a set of amplicon sequence variants that consistently distinguished strobilating polyps from non-strobilating aposymbiotic and mutant polyps, in addition to potential bacterial biomarkers associated with successful metamorphosis. Strobilation was associated with the enrichment of bacterial communities putatively involved in sulfur and nitrogen cycling, whereas non-strobilating aposymbiotic and mutant polyps were characterized by opportunistic bacteria and increased community variability. Together, these results reveal coordinated changes in algal physiology, surface glycan profiles, and bacterial community structure associated with successful strobilation in C. xamachana and support a model in which tripartite host–alga–bacteria interactions influence cnidarian life stage transitions.

ISME Communications↗
USGS2024

Classification of lakebed geologic substrate in autonomously collected benthic imagery using machine learning

Mapping benthic habitats with bathymetric, acoustic, and spectral data requires georeferenced ground-truth information about habitat types and characteristics. New technologies like autonomous underwater vehicles (AUVs) collect tens of thousands of images per mission making image-based ground truthing particularly attractive. Two types of machine learning (ML) models, random forest (RF) and deep neural network (DNN), were tested to determine whether ML models could serve as an accurate substitute for manual classification of AUV images for substrate type interpretation. RF models were trained to predict substrate class as a function of texture, edge, and intensity metrics (i.e., features) calculated for each image. Models were tested using a manually classified image dataset with 9-, 6-, and 2-class schemes based on the Coastal and Marine Ecological Classification Standard (CMECS). Results suggest that both RF and DNN models achieve comparable accuracies, with the 9-class models being least accurate (~73–78%) and the 2-class models being the most accurate (~95–96%). However, the DNN models were more efficient to train and apply because they did not require feature estimation before training or classification. Integrating ML models into benthic habitat mapping process can improve our ability to efficiently and accurately ground-truth large areas of benthic habitat using AUV or similar images.

Michigan, Wisconsin↗
USGS2000

Natural attenuation of chlorinated volatile organic compounds in ground water at Area 6, Naval Air Station Whidbey Island, Washington

Natural attenuation is a viable alternative to pump and treat for meeting remediation objectives in the vicinity of the southern contaminant plume. The combination of historically low contaminant concentrations in ground water, a landfill cap that limits source area contributions, favorable conditions for degradation of VC, and a relatively long downgradient distance to potential receptors are all favorable for natural attenuation as a remediation alternative. Natural attenuation could effectively meet all but one remediation goal that extraction wells PW- 2, PW-4, PW-6, PW-7, PW-8 and PW-9 are currently being employed to meet. The goal of preventing migration of all VC across the site boundary could not be met by natural attenuation. Some VC would migrate south of the Navy boundary, but the potential for subsequent VC mineralization downgradient of the base and the existing institutional controls would result in minimal additional risk from using natural attenuation. In the western contaminant plume natural attenuation is not currently a viable alternative to pump and treat for meeting remediation objectives. There is a possibility that rates for reductive dechlorination of TCE and TCA could increase substantially if the plume was allowed to migrate beneath the Oak Harbor landfill, but there are not enough data to be certain of such an increase. TCA and TCE concentrations at the leading edge of the western plume need to be reduced to at least 25 and 40 µg/L, respectively, to be protective of potential downgradient receptors. Source area TCA and TCE concentrations have decreased substantially over the past ten years, and the extraction wells PW-3 and PW-5 in particular are removing a significant mass of contaminants from ground water, so natural attenuation may be a viable alternative for the western plume in the future. There would be some possible side benefits of using natural attenuation as an alternative to pump and treat in the southern contaminant plume. The first would be that the resulting decrease in the amount of treated water that would need to be recharged in the swale north of the landfill would result in less off-base migration of contamination across the western site boundary. The second benefit would be a substantial reduction in the amount of dissolved iron and manganese being extracted from the shallow aquifer and run through the treatment system. Removing that source of operation and maintenance problems would result in more effective containment and removal of contamination in the western contaminant plume. The most critical data gap identified in this evaluation is the paucity of contaminant chemistry information downgradient of the Navy boundary in the vicinity of the southern contaminant plume. Without such data, the behavior of the plume and the protectiveness of natural attenuation to downgradient receptors cannot be verified, and field attenuation rates for VC cannot be determined directly. The existing long-term monitoring plan would need to be reviewed and revised if natural attenuation is selected as a remedy for the contamination in the southern plume. In particular, additional performance monitoring wells may be required downgradient of the property.

Washington↗
USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗
USGS2025

Smectite-rich horizons in Inceptisols trigger shallow landslides in tropical granitic terranes

Puerto Rico was affected by >70,000 landslides in the wake of 2017 Hurricane Maria, and landslide prevalence was especially high in the Utuado region in the Cordillera Central. Landslide density was highest where soil parent material is granodiorite; landslide slip surfaces tended to be shallow (<60 cm), and often were mobilized rapidly and with long runout distances. This study combines field observations with soil mineralogy (bulk and clay fractions), soil geochemistry (bulk fraction), and soil strength as determined by field cone penetrometer testing (CPT) to test the hypothesis that clay-rich subsoil horizons function as slip planes when water-logged. Soil pits were excavated to depths of ∼200 cm in Ultisols on an undulating plateau and to ∼100 cm in Inceptisols on steep slopes (36-43 o ) that flank the plateau and cone penetrometer tests (CPT) were done within 2 m of the soil pit. Six pits were located adjacent to scarps from previous landslides, enabling analysis of soil profiles downward through extrapolated slip surfaces. Results from X-ray diffraction (XRD), X-ray fluorescence (XRF) and thermogravimetric analysis (TGA) indicate that soils are heterogeneous, often with subsoil horizons enriched in clay minerals and immobile elements (Al, Fe, Ti). Inceptisols on steep slopes often contain smectite-rich horizons at 30–60 cm depth that appear to function as slip surfaces; in other Inceptisols, such horizons are not present and landslide susceptibility is potentially lower. In Ultisols, soil mineralogy is dominated by kaolinite with minor halloysite, and increased kaolinite content at soil depths ≥80 cm at some sites suggests potential slip surfaces enhancing probability of landslides. The origin of clay-rich horizons appears to be (1) fractures in granodiorite that facilitate water flow and leaching, accelerating mineral dissolution during early weathering stages, and (2) smectite-rich buried soils under permeable colluvium likely deposited by a prior mass wasting event. Where clay-rich layers occur beneath more-permeable horizons, rapid infiltration then absorption of water in clay-rich subsoil horizons causes decreased shear strength and increased landslide susceptibility.

Puerto Rico↗
USGS2000

Water quality of selected springs and public-supply wells, Pine Ridge Indian Reservation, South Dakota, 1992-97

This report presents results of a water-quality study for the Pine Ridge Indian Reservation, South Dakota. The study was a cooperative effort between the U.S. Geological Survey and the Water Resources Department of the Oglala Sioux Tribe. Discharge and water-quality data were collected during 1992-97 for 14 contact springs located in the northwestern part of the Reservation. Data were collected to evaluate potential alternative sources of water supply for the village of Red Shirt, which currently obtains water of marginal quality from a well completed in the Inyan Kara aquifer. During 1995-97, water-quality data also were collected for 44 public-supply wells that serve about one-half of the Reservation's population. Quality-assurance sampling was used to evaluate the precision and accuracy of environmental samples. Ten of the springs sampled contact the White River Group, and four contact the Pierre Shale. Springs contacting the White River Group range from calcium bicarbonate to sodium bicarbonate water types. Two springs contacting the Pierre Shale have water types similar to this; however, sulfate is the dominant anion for the other two springs. In general, springs contacting the White River Group are shown to have better potential as alternative sources of water supply for the village of Red Shirt than springs contacting the Pierre Shale. Nine of the springs with better water quality were sampled repeatedly; however, only minor variability in water quality was identified. Six of these nine springs, of which five contact the White River Group, probably have the best potential for use as water supplies. Discharge from any of these six springs probably would provide adequate water supply for Red Shirt during most periods, based on a limited number of discharge measurements collected. Concentrations of lead exceeded the U.S. Environmental Protection Agency (USEPA) action level of 15 µg/L for three of these six springs. Five of these six springs also had arsenic concentrations that exceeded 10 µg/L, which could be problematic if the current maximum contaminant level (MCL) is lowered. Blending of water from one or more springs with water from the existing Inyan Kara well may be an option to address concerns regarding both quantity and quality of existing and potential sources. All nine springs that were sampled for indicator bacteria had positive detections on one or more occasions during presumptive tests. Although USEPA standards for bacteria apply only to public-water supplies, local residents using spring water for domestic purposes need to be aware of the potential health risks associated with consuming untreated water. One spring contacting the White River Group and two springs contacting the Pierre Shale exceeded 15 pCi/L for gross alpha; these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Nine springs were sampled for selected pesticides and tritium. The pesticides atrazine, carbaryl, and 2,4-D were not detected in any of the samples. The nine springs were analyzed for tritium in order to generally assess the age of the water and to determine if concentrations exceeded the MCL established for gross beta-particle activity. Tritium results indicated two springs are composed primarily of water recharged prior to atmospheric testing of nuclear bombs and two other springs have a relatively large percentage of test-era water. The remaining five springs had tritium values that indicated some percentage of test-era water; however, additional sampling would be needed to determine whether water is predominantly pre- or post-bomb age. Of the 44 public-supply wells sampled, 42 are completed in the Arikaree aquifer, one is completed in an alluvial aquifer, and one is completed in the Inyan Kara aquifer. Water from the alluvial well is a sodium bicarbonate water type, water from Arikaree aquifer ranges from calcium bicarbonate to sodium bicarbonate types, and water from the Inyan Kara well is a calcium sulfate bicarbonate type. Of the 44 wells sampled, 28 (64 percent) tested positive for indicator bacteria in presumptive tests. Because these were single samples that generally were collected upstream from chemical treatment feeders, positive detections do not necessarily constitute exceedances of drinking-water standards. A single sample from an Arikaree well exceeded the MCL for arsenic of 50 µg/L. Arsenic exceeded 10 µg/L for six additional Arikaree wells and for the alluvial well and the Inyan Kara well, which could be problematic if the current MCL is lowered. The alluvial well also exceeded the secondary maximum contaminant level (SMCL) for dissolved solids, which is non-enforceable, and the action level for lead. The Inyan Kara well exceeded the SMCL's for iron and for manganese and the MCL of 5 pCi/L for radium-226 and 228 combined. Several Arikaree wells exceeded SMCL's for either pH, sulfate, dissolved solids, iron, or manganese. One Arikaree well exceeded the MCL of 4.0 mg/L for fluoride and another exceeded the MCL of 10 mg/L for nitrite plus nitrate. Ten Arikaree wells equalled or exceeded 15 pCi/L for gross alpha; however, these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Eight wells, all from the Arikaree aquifer, equalled or exceeded the proposed MCL of 20 µg/L for uranium and 33 wells (75 percent) equalled or exceeded one-half of the proposed MCL. Although this standard has only been proposed, additional information regarding the extent of elevated uranium concentrations in the Arikaree aquifer, and the geochemical processes involved, may be beneficial. It was determined from analyses of uranium isotope data for five wells that the source of elevated uranium concentrations is naturally occurring, rather than anthropogenic.

South Dakota↗
USGS2025

The 3D National Topography Model Call for Action—Part 2: The Next Generation 3D Elevation Program

The three-dimensional (3D) National Topography Model initiative to integrate elevation and hydrography data includes the next generation of hydrography data from the 3D Hydrography Program and the next generation of elevation data from the 3D Elevation Program (3DEP). The first-ever collection of light detection and ranging (lidar) data for the nation (IfSAR for Alaska) provides a critical baseline reference, and the addition of multiple repeat elevation mapping projects as part of the next generation of 3DEP would substantially expand analysis capabilities. As the U.S. Geological Survey (USGS) is closing in on our goal of complete coverage with 3DEP data available or in progress for 98.3 percent of the Nation at the end of fiscal year 2024, the USGS is already transitioning to the next generation of 3DEP. Based on the 3D Nation Study results and input from a broad range of stakeholders, the USGS National Geospatial Program has finalized a new design for 3DEP that provides increased lidar quality levels and refresh rates. The new program is designed with more flexibility to meet changing user needs and take advantage of improvements in mapping technologies. The program will aim to expand the level of interagency coordination for topobathymetric lidar acquisition for inland rivers. The next generation of 3DEP will also aim to emphasize research, including advancing program design, products, and services and engaging and leveraging the evolving 3D industry. Research goals also include becoming more flexible in meeting user needs and taking advantage of evolving remote-sensing technologies. The program also plans to move from focusing on producing standard products to producing a concept of a 3D Nation Ecosystem with a variety of inputs, products, and services.

Circular↗
USGS2026

Decadal shifts in groundwater age detected by environmental tracers across California, USA

Groundwater age offers important insight into recharge, storage, and contamination risk. Although models predict age changes can be driven by pumping and climate variability, direct observational evidence remains limited. Here, we analyzed paired environmental tracer suites (tritium, carbon-14, and tritiogenic helium-3) collected a decade apart from 268 wells across California to assess the prevalence of groundwater age transience. Travel-time distribution models and statistical tests indicated age transience at 29% of sites, occurring most often in agricultural regions, such as the San Joaquin Valley and Southern Coast Ranges, where large carbon-14 changes coincided with substantial nitrate and chloride shifts. Sites with tritiogenic helium-3 data showed more frequent age transience, underscoring the value of multi-tracer data sets. These results provide the first regional evidence of widespread groundwater age change and a method for detecting changing water balances with implications for groundwater sustainability and water quality.

California↗
USGS2026

Reassessing water availability in the Nile River Basin using satellite-based irrigation water use accounting

Existing estimates of irrigation areas and water use in the Nile River Basin vary widely and are based on inconsistent data and methodologies. This study leverages advances in remote sensing to provide an up-to-date and consistent basin-wide reassessment of water use in the Nile River Basin. Land cover and actual evapotranspiration data from 2013 to 2022 were used to quantify irrigated areas, irrigation water use, and the average naturalized water yield. Across the basin, 7.1 million hectares of irrigated land consume an average of 72.5 ± 2.6 billion cubic meters (BCM) of blue water annually. Egypt and Sudan together account for 92% of the irrigated area and 97% of the irrigation water use. The basin’s average naturalized yield, evaluated at Dongola station, is determined to be between 108 and 114.4 ± 3.2 BCM. Although conservative, this updated analysis indicates the basin’s average naturalized yield is 14%–20% higher than the previous naturalized yield estimate (95 BCM) and 29%–36% higher than the commonly cited observed flow of 84 BCM, which is frequently treated as the total basin-wide available water. Importantly, the study underscores that the 84 BCM represents flow at the Aswan gauging station after upstream consumptive uses, not the total water available in the basin under naturalized conditions. This distinction is critical for accurate water accounting, planning, and governance in this water-scarce basin. This study demonstrates the value of open-source remote sensing resources in data-scarce regions while emphasizing the need for region specific validation and bias correction for improved accuracy.

Nile River Basin↗
USGS2025

Ungulate migrations of the Western United States, volume 5

Many ungulates migrate between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. In 2018, the U.S. Department of the Interior established Secretarial Order 3362, which provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations by enhancing habitat quality for ungulates across the Western United States. In response to the order, the U.S. Geological Survey (USGS) created the Corridor Mapping Team, which is a collaboration among 11 State agencies, regional and Federal partners, and an expanding number of Tribal wildlife agencies. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States and publishes them in the USGS “Ungulate Migrations of the Western United States” report series. This report details migrations and seasonal ranges from 36 additional herds and includes 2 herd updates detailed in previous reports. The Corridor Mapping Team has mapped the migrations and seasonal ranges of 218 unique herds for the report series, including this report. The report series serves as a map-based inventory of the ungulate migrations across the Western United States for biologists, managers, policymakers, and conservation practitioners. Building on the previous report volumes in the series, volume 5 additionally describes some of the local and national initiatives that are incorporating the products, tools, and information from this growing USGS report series.

Navajo Nation↗
USGS2025

ARCHI: A new R package for automated imputation of regionally correlated hydrologic records

Missing data in hydrological records can limit resource assessment, process understanding, and predictive modeling. Here, we present ARCHI (Automated Regional Correlation Analysis for Hydrologic Record Imputation), a new, open-source software package in R designed to aggregate, impute, cluster, and visualize regionally correlated hydrologic records. ARCHI imputes missing data in “target” records by linear regression using more complete “reference” records as predictors. Automated imputation is implemented using a novel, iterative algorithm that allows each site to be considered a target or reference for regression, growing the pool of complete references with each imputed record until viable gap-filling ceases. Users can limit artifacts from spurious correlations by specifying model-acceptance criteria and applying geospatial, correlation, and group-based filters to control reference selection. ARCHI provides additional functions for visualizing results, clustering records with similar correlation structures, evaluating holdout data, and interactive parameterization with an accessible and intuitive graphical user interface (GUI). This methods brief provides an overview of the ARCHI package, modeling guidelines, and benchmarking on two regional groundwater-level datasets from the Central Valley, CA and Long Island, NY. We evaluate ARCHI alongside widely used multivariate imputation software to highlight and contextualize its computational efficiency, imputation accuracy, and model transparency when applied to large, groundwater-level datasets.

California, New York↗
USGS2025

Evidence for offset of Cretaceous plutons by the Tintina fault in eastern Alaska: Implications for regional metallogeny

Cretaceous magmatism in eastern interior Alaska is voluminous, but temporally and spatially diverse – suggestive of varying sources and drivers. More than 150 new U-Pb zircon and more than 500 geochemical analyses of Cretaceous plutonic units allow for the grouping of distinct plutonic suites. Magmatism was continuous from 120-66 Ma but can be grouped into temporally distinct pulses from ca. 115-100 Ma, 100-90 Ma, and 75-66 Ma. Geochemical diversity occurs during each pulse, further distinguishing multiple suites. Diverse metallogenic epochs are strongly correlated to pluton chemistry. Mineralization is largely absent prior to 108 Ma. From 108-100 Ma, plutonism is coeval with sparse, but notable Au-quartz veins with variable Bi, As, W, and Mo. From 100-90 Ma, intrusion-related mineralization zones from Au-Cu(-Bi) and U-Th in the northwest to central Au- Bi-As-Te(-W), and Mo-W to the southeast. Porphyry style Cu-Mo(-Au) occurrences occur with the latest Cretaceous plutons emplaced from 75-66 Ma . Restoration of ~450 km of dextral movement on the Tintina fault and comparison of metallogenic and geochemical characteristics of Alaska plutons suggest 100-90 Ma plutons may be the continuation of the metallogenically significant Tombstone, Mayo, and Tungsten suites from the Yukon.

Alaska↗
USGS2026

A case study of maximum depositional ages from terrestrial sandstones near the Cretaceous—Paleogene transition, western Williston Basin, USA

We present a new Bayesian method for deriving maximum depositional ages from detrital K-feldspar using total-fusion 40 Ar/ 39 Ar data. Individual analyses weighted by K/Ca ratio, age uncertainty, and percent radiogenic argon prioritize a result to come from accurately measured volcanic sources. Results from this method applied to sandstones from the Hell Creek region of northeastern Montana show that detrital K-feldspar maximum depositional ages align closely with detrital U-Pb zircon ages as well as tephra based chronostratigraphic constraints from both 40 Ar/ 39 Ar and U-Pb data. An age model informed by maximum depositional ages and available tephra data provides an estimate of 1.74 ± 1.04 Ma for the duration of deposition for the Hell Creek Formation. Combined age model and maximum depositional age data suggest ≤ 1.84 Ma of missing time is represented by the Hell Creek and Fox Hills formational disconformity, coinciding with the final regression of the Western Interior seaway.

Montana↗
USGS2025

Grammar to graph—An approach for semantic transformation of annotations to triples

Data annotation is the process of labeling data to show the outcome that a related data model should predict. In this study, annotation data were transformed into semantic graph triples, mainly for use with the Resource Description Framework (RDF), a type of entity-relationship-attribute data model for graph databases. The transformation of annotation data to semantic graph triples provides complex linguistic meaning with data handling advantages such as reduced data storage needs, improved logical specification of relations between objects, and reusable classes and properties that support logic and inference. A grammar-based framework in graph form supports user questions and queries. The words defining approximately 334 topographic feature types compiled by the U.S. Geological Survey were tokenized as units of analysis and grouped by part of speech. Their dependency relations were identified for this study using natural language processing libraries. Dependency concepts are used as structured semantic relations among part-of-speech classes. Tokens, units equivalent to words, form instances of classes and were quantified within a tabular output format using PostgreSQL data storage software. Table data were logically aligned as triples following a mapping file and stored with an ontology file using Ontop virtual triplestore software. A grammar ontology schema for the data was synchronized to match queries whose results validated the graph’s structure. The text analysis produced 8 part-of-speech classes of content words for object representations and 4 classes of function words for operational applications. Dependency relations formed 27 ontology properties for topographic subgraph structures. Token occurrences shaped overall ontology salience and formed a lexicon of syntactic terms for subgraph objects and properties. The schema ontology of class and property population shapes formed the lexicon of English terms. SPARQL Protocol and RDF Query Language (SPARQL) was used with the lexicon to conform data to RDF guidelines. This study confirms the hypothesis that although linguistic logic varies from description logic, its approximation applies to ontology design. Property and query use case patterns extracted from the analysis support queries concerning complex topographic relations and patterns normally embedded within text definitions. The method used in this study could be applied to text forms in other domains, such as survey notes.

Scientific Investigations Report↗