USGS Science⌕ Search

SEARCH · USGS Science

Results for “Behavioral Ecology and Sociobiology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,656 records · Page 69Linked to original sources
USGS2024

A seismic nodal deployment to understand magmatic structure in the vicinity of the Pahala earthquake swarm

In summer-fall 2022, 80 three-component SmartSolo IGU-BD3C-5 nodal seismometers were deployed surrounding the Pāhala seismic swarm on the Island of Hawaiʻi, with the goal of improving seismicity catalogs, and seismic velocity images of the crust and upper mantle in this region. The Pāhala swarm, located south of Mauna Loa and Kīlauea, has been the site of a multiyear sustained swarm of seismicity at depths of ~ 25 – 40 km, with order of magnitude increases in rate in 2015, and then again in 2019. This seismicity is possibly related to the input of magma from the mantle plume below, which may then be subsequently transported to volcanic edifices. However, these processes remain enigmatic, in part due to a lack of precise earthquake locations and seismic velocity models in this region. Here we provide an overview of the deployment, an assessment of the quality of the collected data, and discuss the viability of the dataset for local earthquake relocation, tomography, and teleseismic receiver functions. Through comparisons with proximal permanent broadband and short period instruments, we find that the nodes produce high quality data, particularly at periods shorter than 5 s, although we find, document, and correct discrepancies with the gain and polarities of the instruments. We successfully record signals from teleseismic earthquakes, even at periods longer than 5 s (the corner of the flat response of the nodes). We also record local earthquakes, including details related to source characteristics. This indicates that the data is likely to prove useful for investigations using both local and teleseismic earthquake signals to better understand the connections between the deep and shallow magmatic systems of Hawaiʻi. While this deployment provides a snapshot in time, its success may provide a useful benchmark for future studies as the volcanic systems of Hawaiʻi continue to evolve in the future.

Hawaii↗
USGS2026

Widespread terrestrial ecosystem disruption at the onset of the Paleocene–Eocene Thermal Maximum

The Paleocene–Eocene Thermal Maximum (PETM, ~56 Mya) interval was marked by massive 13 C-depleted carbon emissions into the ocean/atmosphere system, manifested as a negative carbon isotope excursion (CIE) in sedimentary components, and ~5 °C global average warming. Episodes of hydrological perturbations and soil-erosion have been widely documented for the PETM but their link with vegetation- and carbon cycle changes remain poorly constrained. Here, we present organic microfossil evidence showing a strong increase in fern-dominated pioneer vegetation that replaced coniferous forests on the margin of the Norwegian Sea during the first millennia of the CIE. With the present stratigraphic constraints, the “fern spike” occurred simultaneously in terrestrial settings along the North Sea, Arctic Ocean, the US east coast and in southern Australia, indicating that pioneer vegetation persisted for several millennia following a partial collapse of previously stable terrestrial ecosystems. Both the ferns and influx of microcharcoal imply recurrent physical disturbance, including soil destabilization and erosion, potentially linked to droughts, wildfires, and strong hydrological forcing resulting from extreme climate change. Together with evidence for reworked clay minerals and ancient organic matter (kerogen), these findings show that highly disturbed terrestrial ecosystems were widespread across mid- and high-latitude regions globally. Carbon cycle model simulations suggest that a substantial loss of standing and buried biomass, along with oxidation of soil organic matter, acted as important positive feedbacks during the onset of the CIE. Additionally, enhanced kerogen weathering likely contributed as another major positive feedback throughout both the onset and main phase of the CIE.

Proceedings of the National Academy of Sciences↗
USGS2025

Cenozoic stratigraphy of Colorado

As a successor to previous Colorado stratigraphy charts (MS-53 Colorado Stratigraphic Chart and MS-54 Cretaceous Stratigraphy of Colorado), this Colorado Geological Survey (CGS) publication resulted from a collaboration between the CGS, USGS, and the Denver Museum of Nature and Science (DMNS). The chart was designed to illustrate Cenozoic stratigraphy spanning the state’s many sedimentary basins. It builds upon the work of dozens of colleagues and updates Richard Pearl’s seminal 1974 stratigraphy chart. The chart leverages the community’s stratigraphic work in both the subsurface and outcrop, and depicts new geochronologic constraints for many units. To facilitate comparison of strata to external forcing factors, the chart employs a linear timescale. Each unit’s dominant depositional environment is depicted, as are major mountain building events, erosional events, and regional unconformities.

Colorado↗
USGS2026

Bascom Laser Diffraction Sedimentology Laboratory, Reston, Virginia

Introduction At the Bascom Laser Diffraction Sedimentology Laboratory, which is located in the Florence Bascom Geoscience Center at U.S. Geological Survey (USGS) headquarters in Reston, Virginia, scientists use physical sedimentology and particle characterization techniques to conduct detailed sediment characterization. Scientists address research problems in collaboration with other USGS science centers, State geological surveys, commercial industry, universities, and other partners. Laboratory capabilities include laser diffractometry for quantitative particle-size analysis, portable x-ray fluorescence (XRF) analysis for determining elemental abundances in rock or sediment samples, petrographic analysis of geologic media, and mechanical sieve analysis. These methods are used to analyze soil and sediment core material from terrestrial, marine, and lacustrine environments, surface sediments from coastal regions, and calcareous materials. Work done by the laboratory supports geologic mapping, resource assessments, land change studies, and geohazard analyses.

Fact Sheet↗
USGS2025

Submarine groundwater discharge creates cold‐water refugia that can mitigate exposure of heat stress in nearshore corals

Coral reef mortality around the world is accelerating due to human activities and rising sea temperatures that cause bleaching, which is expected to become more frequent. Our ability to predict which corals will be most resilient, however, remains limited due to insufficient information characterizing nearshore temperature and habitat conditions. In this study, we examine how submarine groundwater discharge (SGD) reduces nearshore water temperatures and exposure of corals to heat stress, complementing the understanding that SGD can adversely affect coral when it contains elevated nutrient concentrations. Data from fixed nearshore sensors and vertical depth profiles along ~100 km of the western shoreline of the Island of Hawai’i from 2003 to 2014 demonstrate that submarine groundwater discharge (SGD) can reduce nearshore water temperatures by 1 °C–5°C and create estuarine-like conditions with salinities as low as 20 PSU, where the prevalent coral species, Pocillopora meandrina, Porites lobata , and Montipora capitata , thrive. Time-series temperature records reveal that exposure to high ambient ocean temperatures, which are known to initiate bleaching events, are reduced up to 5%–46% of the time. Coral health surveys indicated coral bleaching in response to moderately high annual temperatures in 2010 and 2011, with more colonies affected farther from cold, SGD-fed waters. Synthesis of these results, along with coral response data following the more extreme marine heat wave of 2014–2015, demonstrates lower coral loss and greater coral recovery near groundwater seeps, particularly those with higher flux and influence on reducing nearshore water temperatures. Our results demonstrate that SGD may therefore provide a beneficial ecosystem service and enhance coral reef resilience, particularly where human-related nutrient additions to groundwater can be mitigated. The implications of our findings are relevant across tropical coasts where groundwater inputs can be substantial, such as the Caribbean and Indo-Pacific, and contribute to improving our understanding of coral sensitivity to gradients in temperature and nutrient stress. Improved management of groundwater resources could thus be vital to local–regional strategies for mitigating future heat stress.

Hawaii↗
USGS2024

Oblique contraction along the fastest ocean-continent transform plate boundary focuses rock uplift west of the Fairweather fault, southeast Alaska

Contraction along the Yakutat–North America plate boundary drives 4.6–9.0 mm/year Holocene rock uplift rates along Earth's fastest slipping (≥49 mm/year) ocean–continent transform fault, the Fairweather Fault. Between Icy Point and Lituya Bay, the near-vertical Fairweather fault focuses rock uplift and rapid right-lateral slip by accommodating both vertical and fault-parallel strain during oblique-slip and separate, predominantly strike-slip ruptures. Unusually high uplift rates, indicated by radiocarbon and luminescence dating, result from a 10-km-wide, asymmetric, positive flower structure along a 20°, ∼30-km-long restraining double bend in the Fairweather fault. The principal reverse fault in the flower structure, the offshore, blind Icy Point–Lituya Bay fault, ruptures no more than every 460–1040 years evidenced by uplifted Holocene shorelines. Maximum 3–5 m coseismic uplifts imply 3.1–10 m dip slip per event and earthquake magnitudes of M w 7.0–7.5. The Yakutat block collides obliquely into North America, and our model entails oblique slip on the Fairweather fault with and without corupture on the reverse fault. Oblique slip is evident by vertically offset (>25 m) fluvial and marine terraces and by the primary Fairweather fault strand that strikes >20° to the west of plate-boundary motion.

Alaska↗
USGS2025

Multidecadal change in pesticide concentrations relative to human health benchmarks in the Nation’s groundwater

Groundwater-quality trend assessments identify aquifers that are responding to changes in pesticide use and the compounds that may pose a threat to water availability. The U.S. Geological Survey has been monitoring pesticide concentrations in groundwater for 25 principal aquifers across the conterminous United States since 1993. The groundwater well locations represent a range of soils, climate, and landforms. The wells are used to monitor groundwater underlying selected agricultural and urban settings and groundwater used for domestic supply. This study examined changes in relative concentrations, defined here as the percentage of wells with pesticide concentrations exceeding a human health benchmark (HHB). HHBs used in this report are legally enforceable drinking-water standards and nonenforceable drinking water levels. Relative pesticide concentration increases may lead to decreased water availability, as restrictions may be put in place for groundwater used as a drinking-water source. This study focused on concentration changes in 22 pesticides that were included in laboratory analysis from 1993 to 2023. The analysis and interpretation of these pesticide concentrations in groundwater have been separated into approximate decadal intervals (decade 1 (1993–2001), decade 2 (2002–12), and decade 3 (2013–22). For one pesticide, 1,2-dibromo-3-chloropropane (DBCP), concentration data were also collected in decade 4 (2023–onward). Atrazine, deethylatrazine, alachlor, prometon, and simazine were 5 pesticides detected at moderate concentrations (greater than 10 percent of the HHB but less than or equal to the HHB). The percentage of wells that had groundwater pesticide concentrations in the moderate concentration category decreased from 7 percent in decade 1 to 2 percent in decade 3. The agricultural networks had the highest percentages of wells with moderate concentrations, and these percentages decreased from 13 percent in decade 1 to 4 percent in decade 3. Moderate concentrations in the urban networks decreased between decades 1 and 2 from 4 percent to 0 percent. No moderate concentrations occurred in the urban networks in decade 3. The percentage of wells with moderate concentrations in the domestic supply networks (1 percent) was the lowest of all the network types and did not change across the three decades. Moderate atrazine or deethylatrazine concentrations occurred across all three decades in aggregated ecoregions representing similar soils, climate, and landforms in the Semiarid West, Midcontinent, and Northeastern United States. Moderate concentrations of prometon, alachlor, and simazine also occurred in the Midcontinent, Arid West, Northeast, South Atlantic Gulf, and Semiarid West regions, but the moderate concentrations did not persist across all three decades. DBCP was the only pesticide that exceeded its respective HHB, and the exceedances occurred across all four decades. In this report, the DBCP analysis was limited to one well network in the Central Valley, California. Agricultural use of DBCP was suspended in 1977. Forty-five years after being banned, DBCP concentrations were greater than the maximum contaminant level of 2 micrograms per liter (μg/L), but the number of exceedances decreased from 50 percent to 15 percent of the samples between 1993 and 2023. This assessment of decadal groundwater pesticide concentrations provides a characterization of changes in water availability because of pesticide contamination in areas where groundwater is used as a drinking-water source. The results highlight the importance of continued long-term monitoring and assessment of groundwater pesticides to identify locations and specific compounds that may pose a potential risk to human health.

continental United States↗
USGS2025

Mapping potential sensitivity to hydrogeomorphic change in the UMRS riverscape

In 2020 the U.S. Geological Survey (USGS), as part of the Upper Mississippi River Restoration (UMRR) Program, began a new project to characterize potential hydrogeomorphic change associated with hydrogeomorphic units (HGUs) and their catenae (units linked by their association with sediment sources and flow origins). The goal of the project was to develop a geographic information system (GIS) database of HGUs for the Upper Mississippi River System (UMRS) available to both scientists and river managers working on UMRR studies and HREP planning and design studies. The characterization was based on a hydrogeomorphic change hierarchical classification developed previously for the UMRS. The products were generated with automated techniques in a GIS using systemic datasets. Landforms were mapped from the 2015 UMRS topobathymetric dataset with geomorphon (shape-based) tools tailored for the large riverscape, valley bottom environments in the UMRS. A clustering analysis was applied to the resulting landforms to identify HGUs associated with zones of perennial low flows, bankfull flows, and overbank floodplains. Catenae were assembled based on the proximity of the units to the main channel, tributary mouths, and side channels from previously published aquatic areas (USACE, 2018) coupled with least-cost flowpath linkages between potential sediment origins and planform change units developed by Rogala, Fitzpatrick, and Henderson (2020). These GIS-based analyses were successful at identifying a range of HGUs using an automated technique with available data across the entire riverscape, with emphasis on those that have the potential for hydrogeomorphic change. Most of the resulting features are depositional, as expected in a large river system. However, this is the first attempt of linking tributary inputs, side channel erosion and levee breaches with their depositional counterparts. The approach was successfully piloted in Pools 8 and 10 in the Upper Impounded Reach and Pool 14 in the Lower Impounded Reach, with next steps for application in reaches of the unimpounded section and Illinois River. This report emphasizes results from Pool 10, which was the focus of most of our attention during the pilot phase.

Illinois, Indiana, Iowa, Minnesota, Missouri, Sout↗
USGS2026

From landslide susceptibility to risk assessment in the conterminous U.S.

Understanding the spatial distribution of landslide prone-areas and what consequences they may have is important for risk management and land-use planning. In the United States, although landslides occur in every state, a comprehensive landslide risk assessment is still missing. Existing efforts, such as the Federal Emergency Management Agency (FEMA)’s National Risk Index, rely on aggregated products and coarse cartographic units, limiting their geomorphological and practical accuracy. In this study, we present a methodological advance for landslide risk assessment across large areas with incomplete and sparse data. We apply our procedures to the conterminous United States by integrating geomorphologically meaningful partitions and spatial and temporal probability data-driven models. Landslide susceptibility is estimated using a Generalized Additive Mixed Model incorporating a bias capture/correction scheme to account for inventory inaccuracies (reference Area Under the Curve = 0.75). The exceedance probabilities of landslide occurrence are defined for three temporal scenarios (2, 5, and 10 year). Then, we explore the associated potential economic consequences for human settlements and agricultural areas. The findings indicate that the spatial variability of risk is primarily controlled by exposure rather than by susceptibility/hazard alone. The mean risk increases by ∼170% from the 2-year to the 10-year scenario. Beyond its quantitative outcomes, this study offers a blueprint for continental or sub-continental scale landslide risk assessments, demonstrating both the opportunities and current limitations.

Engineering Geology↗
USGS2026

Geochemical disequilibrium at the brittle-ductile transition

We investigate the microtextural, microchemical, and isotopic effects of late-stage ductile deformation in quartzite mylonites and kyanite–muscovite–quartz veins from the Raft River shear zone (Utah). Quartz microstructures record pervasive disequilibrium, expressed by unannealed features including undulatory extinction, deformation lamellae, and poorly defined fabrics, typical of waning deformation in shear zones. Microchemical disequilibrium is best preserved in kyanite quartzites, where CL-zoned kyanite records repeated fractures, overgrowth, and mineral precipitation, and in muscovite from muscovite-poor quartzite mylonites that shows minor-element zoning consistent with syn-deformational overgrowth on detrital cores. In contrast, muscovite from muscovite-rich kyanite quartzites exhibits minimal chemical zoning. These microchemical variations correlate with 40 Ar/ 39 Ar age systematics. Chemically zoned muscovite preserves variable single-step ages, including ∼150 Ma ages, reflecting retention of detrital cores. In contrast, syndeformational muscovite consistently yields Miocene ages, indicating recrystallization and new growth below argon closure temperatures that reset inherited isotopic signatures. Similar trends are observed in quartzite mylonites, where increasing quartz recrystallization and stronger crystallographic preferred orientations occur toward deeper structural levels. Together, these observations indicate increasing retrograde deformation and recrystallization with depth in the Raft River shear zone and demonstrate that strain-driven recrystallization exerts a first-order control on muscovite ages. We suggest that apparent thermochronologic gradients in retrograde shear zones may reflect recrystallization gradients rather than temperature gradients. Where cooling limits the thermal driving force for recrystallization, isotopic relics are preserved, and local deformation and fluid availability control re-equilibration. Consequently, isotopic disequilibrium—particularly in the 40 Ar/ 39 Ar system—may be the rule rather than the exception of retrograde tectonic environments.

Idaho, Utah↗
USGS2026

Statewide surficial geologic map of Nebraska underscores Quaternary landscape evolution from the High Plains to the Central Lowland

Surficial geologic mapping in Nebraska has been conducted primarily at the 1:24,000 scale since the mid-1990s, although there have also been limited efforts to map generalized Quaternary and surficial geology within the state and the region. We compiled and evaluated disparate maps (1:24,000–1:1,000,000) and datasets—including geologic, soil and soil parent material, and geomorphic maps as well as LiDAR derivatives—to produce a single 1:500,000 scale surficial geologic map of Nebraska that is the first of its kind. This new map provides a coarse-scale surficial geologic map that will be incorporated into a nationwide U.S. Geological Survey Quaternary geologic map. It also reflects the variation and uniqueness of physical landscapes in the state, where the Great Plains and Central Lowland physiographic provinces meet, further developing a richer interdisciplinary understanding of regional geomorphology in the heart of North America.

Nebraska↗
USGS2025

Near-surface material and topography generate anomalous high-frequency ground motion amplification in Chugiak, Alaska

An ∼3 km long nodal array oriented approximately east–west was deployed in Chugiak, Alaska, by the U.S. Geological Survey during 2021. The array intersects with the permanent NetQuakes station NP.ARTY, where peak ground acceleration (PGA) value of 1.98 g was recorded during the 2018 M w 7.1 Anchorage, Alaska, earthquake, in sharp contrast to the PGA of ∼0.3 g at a site just 4 km to the west. Seismic data for M w 1.8–4.3 aftershocks from the M w 7.1 event recorded by the nodal array confirm the anomalously large ground motions obtained at NP.ARTY as well as similar amplifications at nodes within ∼1 km to the east. Here, we performed 0–10 Hz 3D finite‐difference simulations, including high‐resolution surface topography, to explore the cause of the unexpectedly large amplification. As expected, the simulations computed with a regional 3D tomography velocity model severely underpredict the 0–10 Hz acceleration records at almost all sites. Adding a near‐surface low‐velocity taper to 300 m depth amplifies the accelerations by up to a factor of 5 and enables a reasonable match between the nodal data and simulations at sites to the west of NP.ARTY. However, this model still underpredicts the spectral energy in the area covered by glacial sediments by up to an order of magnitude. The addition of a till layer using a depth‐dependent shear‐wave velocity ( ⁠⁠ V s ) profile along with a homogeneous, 8 m thick low‐velocity layer with V s = 250 m/s representing the kame terraces improves the fit to data to within a factor of 2 at nodes located on top of the glacial sediments. Our study shows that the anomalously large high‐frequency amplification recorded at and near NP.ARTY can be explained by a combination of topographic effects and near‐surface low‐velocity material with amplification effects on the high‐frequency ground motion by up to about 40% and an order of magnitude, respectively.

Alaska↗
USGS2024

Groundwater flow model for the Des Moines River alluvial aquifer near Des Moines, Iowa

Des Moines Water Works (DMWW) is a regional municipal water utility that provides residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model. A conceptual and numerical groundwater flow model have been developed to characterize the Des Moines River alluvial aquifer under existing conditions, to simulate water levels observed in the RCWs, and to provide publicly accessible hydrologic data and research that advance understanding of the regional hydrologic system and can potentially be used in the future to evaluate groundwater production scenarios. Model performance was assessed by comparing observed and simulated groundwater levels that included water level elevations, water level changes, water level inequality observations, surface water streamflow, and change in surface water volume from upstream to downstream. Water table elevation in the aquifer layers is on average slightly overestimated with average absolute value error less than 1.5 meters at both RCWs and less than 2.5 meters for all observation wells in the alluvial aquifer layers. The model also accurately simulated water tables greater than the RCW design minimum (a water level threshold at which RCW pumping is reduced) in all timesteps for which water level observation data existed. Water table elevation error was higher in other model layers that were not the focus of the study, and the model did not accurately match streamflow targets.

Iowa↗
USGS2024

Effects of stochastically-simulated near-fault ground motions on soil liquefaction

The scarcity of historically recorded near-fault ground motions poses a challenge to systematically understanding the influence of near-fault effects on various types of seismic demands for engineering purposes. In particular, the current state of knowledge of the influence of ground-shaking intensity on soil liquefaction and its consequences does not specifically account for the effects of near-fault ground motion characteristics. In this study, the influence of near-fault ground motions on liquefaction triggering and lateral spreading are investigated using non-linear modeling of a hypothetical liquefiable soil column in the finite-element computational platform OpenSees subjected to simulated ground motion time series that represent strong earthquake shaking in the near field. The simulated ground motion time series and resulting datasets are based on a parametric stochastic model and are developed for a range of source and path parameters to represent a realistic variability of ground motion characteristics. Dependencies between ground motion intensity measures (IMs) and liquefaction demand parameters are investigated for near-fault pulse and nonpulse-like ground motion sets. Evolutionary IMs, such as cumulative absolute velocity (CAV) and the time-varying magnitude-adjusted peak ground acceleration (PGAM), are considered in developing liquefaction triggering probability density functions. Post-liquefaction triggering responses such as lateral spreading displacements are examined in relation to PGA M and CAV. The ground motion simulations are validated by comparing their liquefaction-capacity PGA M fragilities and post-triggering CAV vulnerability relationships to historical records from the 1994 Northridge earthquake in California, USA. Finally, a path forward for future studies that includes finding systematic differences in the IM-liquefaction demand relationships between near-fault and far-field stochastic ground motion sets is outlined.

Conference Paper↗
USGS2000

Regional evaluation of evapotranspiration in the Everglades

Nine sites in the Florida Everglades were selected and instrumented for collection of data necessary for evapotranspiration-determination using the Bowen-ratio energy-budget method. The sites were selected to represent the sawgrass or cattail marshes, wet prairie, and open-water areas that constitute most of the natural Everglades system. At each site, measurements necessary for evapotranspiration (ET) calculation and modeling were automatically made and stored on-site at 15- or 30-minute intervals. Data collected included air temperature and humidity at two heights, wind speed and direction, incoming solar radiation, net solar radiation, water level and temperature, soil moisture content, soil temperature, soil heat flux, and rainfall. Data summarized in this report were collected from January 1996 through December 1997, and the development of site-specific and regional models of ET for this period is described. Latent heat flux is the energy flux density equivalent of the ET rate. Modified Priestley-Taylor models of latent heat flux as a function of selected independent variables were developed at each site. These models were used to fill in periods of missing latent heat flux measurement, and to develop regional models of the entire Everglades region. The regional models may be used to estimate ET in wet prairie, sawgrass or cattail marsh, and open-water portions of the natural Everglades system. The models are not applicable to forested areas or to the brackish areas adjacent to Florida Bay. Two types of regional models were developed. One type of model uses measurements of available energy at a site, together with incoming solar energy and water depth, to estimate hourly ET. This available-energy model requires site data for net radiation, water heat storage, and soil heat flux, as well as data for incoming solar radiation and water depth. The other type of model requires only incoming solar energy, air temperature, and water depth data to provide estimates of hourly ET. The second model thus uses data that are more readily available than the data required for the available-energy model. Computed ET mean annual totals for all nine sites for the 1996-97 period ranged from 42.4 inches per year at a site where the water level is below land surface for several months each year to 57.4 inches per year at an open-water site with no emergent vegetation. Although the density of photosynthetically-active plant leaves has been shown to relate directly to ET in some studies, it does not appear to relate directly to ET in the Everglades, based on comparison of annual ET data with leaf-area index, defined as the Normalized Difference Vegetation Index (NDVI), data from satellite imagery. NDVI and ET appear to be inversely related in the Everglades. The greatest ET rates occurred at open-water sites where the NDVI data indicated the lowest leaf-area index. Among the remaining vegetated sites, there is no clear relation between ET and NDVI, though the highest ET rate corresponded to the lowest NDVI and one of the lowest ET rates corresponded to the highest NDVI value. The variation in ET follows a seasonal pattern, with lowest monthly ET totals occurring in December through February, and highest ET occurring in May through August. The greatest range in monthly ET among all nine sites for the 2-year period occurred at site 3: from 1.81 inches in December 1997 to 6.84 inches in July 1996. A study to compare the Bowen-ratio/energy balance method of ET measurement with the eddy-correlation method was done at one site from June 22, 1998, through September 28, 1998. This comparison indicated that both methods gave comparable values of the Bowen ratio, but there was a considerable difference in available energy measured by the two methods. The mean of all 30-minute measured turbulent heat fluxes from the eddy-correlation apparatus for June 22 through September 29, 1998, was 137.4 watts per square meter, and the mean of the corresponding measured energy was 163.6 watts per square meter, or about 20 percent greater. The disagreement in mean energy fluxes measured by the two methods is problematical and is not fully understood. Although the difference seems to be related to friction velocity, and is practically non-existent at values of friction velocity greater than 0.3 meter per second, the "correctness" of either method cannot be determined with the data available.

Florida↗
USGS2025

Forecast, monitor, adapt: A multi-agency strategy to protect people from postfire debris flows

In 2020, a wildfire burned across Glenwood Canyon in Colorado, USA. A history of postfire debris flows in the region and a hazard assessment for the burn area indicated that potentially life-threatening debris flows could be triggered by rainfall within months of a wildfire. As a result, four government agencies evaluated strategies to help mitigate hazards, including the loss of human life, that may be associated with debris-flow events. After the fire, 26 large debris flows occurred in the summer of 2021 and three sediment-laden flows occurred in the summer of 2023, but there were no major injuries or fatalities reported. We found that integrating hazard assessment/ forecasting, monitoring, and adaptation scenarios was a successful strategy for reducing postfire debris-flow risks to human life (including injuries and fatalities). Weather forecasts and estimates of debris-flow triggering rainfall thresholds, likelihood, and volume were used to anticipate the timing, location, and magnitude of debris-flow events. Rainfall monitoring and detailed recordkeeping of storms that triggered debris flows were used to validate and update debris-flow warning thresholds that varied with time following the wildfire. Although the governmental agencies working in this burn area had distinct and differing agency mandates, they were able to integrate information to reduce the risk of debris-flow events to human life.

Colorado↗
USGS2025

A comprehensive geologic framework of the National Crustal Model for seismic hazard studies in the conterminous United States

A three-dimensional (3D) geologic framework has been developed for the conterminous United States (U.S.) as part of the U.S. Geological Survey National Crustal Model to enhance seismic hazard modeling. The geologic framework is created from geologic maps and multiple subsurface geologic unit boundaries including the base of the Miocene, Cenozoic, Phanerozoic, and the Mohorovičić discontinuity. Modifications are made to surficial geologic maps to remove discontinuities across state and country borders. The subsurface distribution of rock type and age is extrapolated from the surface, seeded with subsurface geologic information, and constrained by a map of basement geology. The framework provides the basis for estimates of subsurface seismic velocity and density that is needed to improve estimates of earthquake ground shaking and seismic hazard. The present framework greatly expands and updates a previously published 3D geologic framework of the western part of the U.S. that was itself a first-of-its-kind digital 3D portrayal of the nation.

conterminous United States↗
USGS2025

Seismic response of rock towers at the Trona Pinnacles (U.S.A.) to the 2019 Ridgecrest earthquake sequence: Theory, observations, and models

We analyze the seismic response of a class of fragile geologic features (FGFs), referred to as rock towers (RTs) at the Trona Pinnacles, a group of RTs in southern California that suffered strong shaking during the 2019 Ridgecrest earthquake sequence. FGFs, including RTs, may provide maximum constraints on past earthquake shaking intensity, and thereby support probabilistic seismic hazard assessments (PSHAs). In a rare case study, we explore the hypothesis that RT structural integrity is time dependent, as damage accumulates progressively. We develop finite‐element method (FEM) models of the RTs using photogrammetric shape models. We validate the models by comparing numerical simulations of their response to broadband ground shaking with low‐intensity seismic recordings obtained at the Pinnacles. Results of our simulations are in good agreement with the seismic recordings of actual earthquake aftershocks. We next use the results of the FEM models to analyze the response and evolution of RTs. Our analyses elucidate the influence of geometry over their seismic response, providing a rationale that may explain the rarity of slender RTs at Trona: high‐aspect‐ratio structures that respond in bending develop detrimental tensile stresses that crack the rock, whereas low‐aspect‐ratio ones’ response also includes shearing, which does not compromise material integrity as much as tension. Field measurements with a rebound hammer support this finding, suggesting that the material around the base of slender rocks has been weakened relative to other parts of the RT. We also study how to define simplified mechanical models (“archetypes”) to predict the natural frequencies of RTs. Results from our work illuminate the fundamental mechanisms of seismic response and progressive failure of RTs, and open new avenues of research to potentially incorporate these geologic features as long‐return period constraints on PSHA, in ways analogous to those of the widely used precariously balanced rocks.

California↗