USGS Science⌕ Search

SEARCH · USGS Science

Results for “World & I”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources

Characterization of nutrient, organic carbon, and sediment loads and concentrations from the Mississippi River into the northern Gulf of Mexico

We synthesize and update the science supporting the Action Plan for Reducing, Mitigating, and Controlling Hypoxia in the Northern Gulf of Mexico (Mississippi River/Gulf of Mexico Watershed Nutrient Task Force 2001) with a focus on the spatial and temporal discharge and patterns of nutrient and organic carbon delivery to the northern Gulf of Mexico, including data through 2006. The discharge of the Mississippi River watershed over 200 years varies but is not demonstrably increasing or decreasing. About 30% of the Mississippi River was shunted westward to form the Atchafalaya River, which redistributed water and nutrient loads on the shelf. Data on nitrogen concentrations from the early 1900s demonstrate that the seasonal and annual concentrations in the lower river have increased considerably since then, including a higher spring loading, following the increase in fertilizer applications after World War II . The loading of total nitrogen (TN) fell from 1990 to 2006, but the loading of total phosphorus (TP) has risen slightly, resulting in a decline in the TN:TP ratios. The present TN:TP ratios hover around an average indicative of potential nitrogen limitation on phytoplankton growth, or balanced growth limitation, but not phosphorus limitation. The dissolved nitrogen:dissolved silicate ratios are near the Redfield ratio indicative of growth limitations on diatoms. Although nutrient concentrations are relatively high compared to those in many other large rivers, the water quality in the Mississippi River is not unique in that nutrient loads can be described by a variety of land-use models. There is no net removal of nitrogen from water flowing through the Atchafalaya basin, but the concentrations of TP and suspended sediments are lower at the exit point (Morgan City, Louisiana) than in the water entering the Atchafalaya basin. The removal of nutrients entering offshore waters through diversion of river water into wetlands is presently less than 1% of the total loadings going directly offshore, and would be less than 8% if the 10,093 km 2 of coastal wetlands were successfully engineered for that purpose. Wetland loss is an insignificant contribution to the carbon loading offshore, compared to in situ marine production. The science-based conclusions in the Action Plan about nutrient loads and sources to the hypoxic zone off Louisiana are sustained by research and monitoring occurring in the subsequent 10 years.

Gulf of Mexico, Mississippi River↗

Implications for faunal habitat related to altered macrophyte structure in regulated lakes in northern Minnesota

Water-level regulation has altered the plant species composition and thus the structure of nearshore aquatic macrophyte communities in two regulated lakes in northern Minnesota as compared with a nearby unregulated lake. Results of previous faunal studies in the regulated lakes were used as a basis for assessing the effects of vegetation changes on faunal communities. The unregulated lake with mean annual water-level fluctuations of 1.6 m supported structurally diverse plant communities and varied faunal habitat at all depths studied. Mean annual fluctuations on one regulated lake were reduced to 1.1 m, and dense beds of four erect aquatic macrophytes dominated the 1.75-m depth that was never dewatered. We suggest that this lack of plant diversity and structural complexity resulted in diminished habitat for invertebrates, reduced availability of invertebrates as food for waterbirds and fish, reduced winter food supplies for muskrats, and reduced feeding efficiency for adult northern pike, yellow perch, and muskellunge. Mean annual fluctuations in the other regulated lake were increased to 2.7 m, and rosette and mat-forming species dominated the 1.25-m depth that was affected by winter drawdowns. We suggest that the lack of larger canopy plants resulted in poor habitat for invertebrates, reduced availability of invertebrates as food for waterbirds and fish, and poor nursery and adult feeding habitat for many species of fish. In addition, the timing and extent of winter drawdowns reduced access to macrophytes as food for muskrats and as spawning habitat for northern pike and yellow perch. In regulated lakes throughout the world, indirect effects on aquatic fauna resulting from alteration of wetland and aquatic macrophyte communities should be considered when water-level management plans are developed.

Wetlands↗

Sedimentology of the Argo and Gascoyne abyssal plains, NW Australia: Report on Ocean Drilling Program Leg 123 (Sept. 1–Nov. 1, 1988)

Ocean Drilling Program Leg 123 drilled two sites in the Indian Ocean in order to study the rifting and early spreading of one of the world’s oldest ocean basins. Site 765 was drilled in 5714 meters of water on the Argo Abyssal Plain northwest of Australia. The sedimentary succession records the opening of an ocean basin, from the first sediments deposited atop young oceanic crust, to the present day. The oldest sediments are microlaminated brown silty claystones, locally rich in calcareous bioclasts. Most of the sequence is dominated by turbidites (primarily calcareous) which probably originated within canyons cut into the margin of the drowned platform of the North West Shelf of Australia. Site 766 is located in 3998 meters of water, at the base of the steep western margin of the Exmouth Plateau. The oldest sediments penetrated are glauconitic, volcaniclastic, and bioclastic sandstones and siltstones, which are interbedded with inclined basaltic sills. These sediments were deposited by a prograding submarine fan system which shed shallow marine sediments westward or northwestward off of the western rim of the Exmouth Plateau. Sandstones are succeeded by silty claystones, recording gradual abandonment or redirection of the fan system. An overlying sequence of pelagic and hemipelagic clayey and zeolitic calcareous oozes and chalks is succeeded by featureless and homogeneous pelagic nannofossil oozes.

Argo abyssal plain, Gascoyne abyssal plain↗

Generating an image of dispersive energy by frequency decomposition and slant stacking

We present a new algorithm for calculating an image of dispersive energy in the frequency-velocity (f-v) domain. The frequency decomposition is first applied to a shot gather in the offset-time domain to stretch impulsive data into pseudo-vibroseis data or frequency-swept data. Because there is a deterministic relationship between frequency and time in a sweep used in the frequency decomposition, the first step theoretically completes the transform from time to frequency. The slant stacking is then performed on the frequency-swept data to complete the transform from offset to velocity. This simple two-step algorithm generates an image of dispersive energy in the f-v domain. The straightforward transform only uses offset information of data so that this algorithm can be applied to data acquired with arbitrary geophone-acquisition geometry. Examples of synthetic and real-world data demonstrate that this algorithm generates accurate images of dispersive energy of the fundamental as well as higher modes. ?? Birkha??user Verlag, Basel, 2007.

Pure and Applied Geophysics↗

Rayleigh-wave dispersive energy imaging using a high-resolution linear radon transform

Multichannel Analysis of Surface Waves (MASW) analysis is an efficient tool to obtain the vertical shear-wave profile. One of the key steps in the MASW method is to generate an image of dispersive energy in the frequency-velocity domain, so dispersion curves can be determined by picking peaks of dispersion energy. In this paper, we propose to image Rayleigh-wave dispersive energy by high-resolution linear Radon transform (LRT). The shot gather is first transformed along the time direction to the frequency domain and then the Rayleigh-wave dispersive energy can be imaged by high-resolution LRT using a weighted preconditioned conjugate gradient algorithm. Synthetic data with a set of linear events are presented to show the process of generating dispersive energy. Results of synthetic and real-world examples demonstrate that, compared with the slant stacking algorithm, high-resolution LRT can improve the resolution of images of dispersion energy by more than 50%. ?? Birkhaueser 2008.

Pure and Applied Geophysics↗

Data-resolution matrix and model-resolution matrix for Rayleigh-wave inversion using a damped least-squares method

Inversion of multimode surface-wave data is of increasing interest in the near-surface geophysics community. For a given near-surface geophysical problem, it is essential to understand how well the data, calculated according to a layered-earth model, might match the observed data. A data-resolution matrix is a function of the data kernel (determined by a geophysical model and a priori information applied to the problem), not the data. A data-resolution matrix of high-frequency (>2 Hz) Rayleigh-wave phase velocities, therefore, offers a quantitative tool for designing field surveys and predicting the match between calculated and observed data. We employed a data-resolution matrix to select data that would be well predicted and we find that there are advantages of incorporating higher modes in inversion. The resulting discussion using the data-resolution matrix provides insight into the process of inverting Rayleigh-wave phase velocities with higher-mode data to estimate S-wave velocity structure. Discussion also suggested that each near-surface geophysical target can only be resolved using Rayleigh-wave phase velocities within specific frequency ranges, and higher-mode data are normally more accurately predicted than fundamental-mode data because of restrictions on the data kernel for the inversion system. We used synthetic and real-world examples to demonstrate that selected data with the data-resolution matrix can provide better inversion results and to explain with the data-resolution matrix why incorporating higher-mode data in inversion can provide better results. We also calculated model-resolution matrices in these examples to show the potential of increasing model resolution with selected surface-wave data. ?? Birkhaueser 2008.

Pure and Applied Geophysics↗

What do data used to develop ground-motion prediction equations tell us about motions near faults?

A large database of ground motions from shallow earthquakes occurring in active tectonic regions around the world, recently developed in the Pacific Earthquake Engineering Center’s NGA-West2 project, has been used to investigate what such a database can say about the properties and processes of crustal fault zones. There are a relatively small number of near-rupture records, implying that few recordings in the database are within crustal fault zones, but the records that do exist emphasize the complexity of ground-motion amplitudes and polarization close to individual faults. On average over the whole data set, however, the scaling of ground motions with magnitude at a fixed distance, and the distance dependence of the ground motions, seem to be largely consistent with simple seismological models of source scaling, path propagation effects, and local site amplification. The data show that ground motions close to large faults, as measured by elastic response spectra, tend to saturate and become essentially constant for short periods. This saturation seems to be primarily a geometrical effect, due to the increasing size of the rupture surface with magnitude, and not due to a breakdown in self similarity.

Pure and Applied Geophysics↗

Book review: Three great tsunamis: Lisbon (1755), Sumatra-Andaman (2004), and Japan (2011)

“Three Great Tsunamis: Lisbon (1755), Sumatra–Andaman (2004), and Japan (2011)” is published in Springer’s new series SpringerBriefs. According to Springer’s website, the SpringBriefs volumes are intended to provide “concise summaries of cutting-edge research and practical applications across a wide spectrum of fields”. Among the several categories considered for SpringerBriefs are in-depth case studies, for which this volume is most closely aligned. This 89-page volume comprises six chapters. Chapter 1 describes the fundamentals of tsunamis at a basic level, including a selective list of major historical tsunamis. Chapter 2 describes the 1755 Lisbon earthquake and tsunami, although no tectonic background is given for this event, as it is for the other two events considered in this volume. Included in this chapter, however, is a brief but fascinating account of how this earthquake affected scientific and philosophical thought during the Age of Enlightenment. The authors’ description of the 2004 Sumatra–Andaman earthquake and tsunami in Chapter 3 includes instrumental and post-tsunami measurements of the tsunami, ground shaking and subsidence, and other effects such as mud volcanoes. Primarily, tsunami observations are described for the 2011 Japan event, including a brief summary of the nuclear disaster in the Fukushima region. The fifth chapter is on tsunami warning systems, including new and emerging systems around the world in the twenty-first century. The final chapter provides perspectives on why these events were so destructive and how future hazards may be mitigated. Review info: Three Great Tsunamis: Lisbon (1755), Sumatra–Andaman (2004), and Japan (2011). By Harsh K. Gupta and Vineet K. Gahalaut, 2013. ISBN: 978-9400765757

Pure and Applied Geophysics↗

Introduction to “Global tsunami science: Past and future, Volume III”

Twenty papers on the study of tsunamis are included in Volume III of the PAGEOPH topical issue “Global Tsunami Science: Past and Future”. Volume I of this topical issue was published as PAGEOPH, vol. 173, No. 12, 2016 and Volume II as PAGEOPH, vol. 174, No. 8, 2017. Two papers in Volume III focus on specific details of the 2009 Samoa and the 1923 northern Kamchatka tsunamis; they are followed by three papers related to tsunami hazard assessment for three different regions of the world oceans: South Africa, Pacific coast of Mexico and the northwestern part of the Indian Ocean. The next six papers are on various aspects of tsunami hydrodynamics and numerical modelling, including tsunami edge waves, resonant behaviour of compressible water layer during tsunamigenic earthquakes, dispersive properties of seismic and volcanically generated tsunami waves, tsunami runup on a vertical wall and influence of earthquake rupture velocity on maximum tsunami runup. Four papers discuss problems of tsunami warning and real-time forecasting for Central America, the Mediterranean coast of France, the coast of Peru, and some general problems regarding the optimum use of the DART buoy network for effective real-time tsunami warning in the Pacific Ocean. Two papers describe historical and paleotsunami studies in the Russian Far East. The final set of three papers importantly investigates tsunamis generated by non-seismic sources: asteroid airburst and meteorological disturbances. Collectively, this volume highlights contemporary trends in global tsunami research, both fundamental and applied toward hazard assessment and mitigation.

Pure and Applied Geophysics↗

Tectonic controls of Mississippi Valley-type lead-zinc mineralization in orogenic forelands

Most of the world's Mississippi Valley-type (MVT) zinc-lead deposits occur in orogenic forelands. We examine tectonic aspects of foreland evolution as part of a broader study of why some forelands are rich in MVT deposits, whereas others are barren. The type of orogenic foreland (collisional versus Andean-type versus inversion-type) is not a first-order control, because each has MVT deposits (e.g., Northern Arkansas, Pine Point, and Cevennes, respectively). In some MVT districts (e.g., Tri-State and Central Tennessee), mineralization took place atop an orogenic forebulge, a low-amplitude (a few hundred meters), long-wavelength (100-200 km) swell formed by vertical loading of the foreland plate. In the foreland of the active Banda Arc collision zone, a discontinuous forebulge reveals some of the physiographic and geologic complexities of the forebulge environment, and the importance of sea level in determining whether or not a forebulge will emerge and thus be subject to erosion. In addition to those on extant forebulges, some MVT deposits occur immediately below unconformities that originated at a forebulge, only to be subsequently carried toward the orogen by the plate-tectonic conveyor (e.g., Daniel's Harbour and East Tennessee). Likewise, some deposits are located along syn-collisional, flexure-induced normal and strike-slip faults in collisional forelands (e.g., Northern Arkansas, Daniel's Harbour, and Tri-State districts). These findings reveal the importance of lithospheric flexure, and suggest a conceptual tectonic model that accounts for an important subset of MVT deposits-those in the forelands of collisional orogens. The MVT deposits occur both in flat-lying and in thrust-faulted strata; in the latter group, mineralization postdated thrusting in some instances (e.g., Picos de Europa) but may have predated thrusting in other cases (e.g., East Tennessee).

Mineralium Deposita↗

The giant Carlin gold province: A protracted interplay of orogenic, basinal, and hydrothermal processes above a lithospheric boundary

Northern Nevada hosts the only province that contains multiple world-class Carlin-type gold deposits. The first-order control on the uniqueness of this province is its anomalous far back-arc tectonic setting over the rifted North American paleocontinental margin that separates Precambrian from Phanerozoic subcontinental lithospheric mantle. Globally, most other significant gold provinces form in volcanic arcs and accreted terranes proximal to convergent margins. In northern Nevada, periodic reactivation of basement faults along this margin focused and amplified subsequent geological events. Early basement faults localized Devonian synsedimentary extension and normal faulting. These controlled the geometry of the Devonian sedimentary basin architecture and focused the discharge of basinal brines that deposited syngenetic gold along the basin margins. Inversion of these basins and faults during subsequent contraction produced the complex elongate structural culminations that characterize the anomalous mineral deposit "trends." Subsequently, these features localized repeated episodes of shallow magmatic and hydrothermal activity that also deposited some gold. During a pulse of Eocene extension, these faults focused advection of Carlin-type fluids, which had the opportunity to leach gold from gold-enriched sequences and deposit it in reactive miogeoclinal host rocks below the hydrologic seal at the Roberts Mountain thrust contact. Hence, the vast endowment of the Carlin province resulted from the conjunction of spatially superposed events localized by long-lived basement structures in a highly anomalous tectonic setting, rather than by the sole operation of special magmatic or fluid-related processes. An important indicator of the longevity of this basement control is the superposition of different gold deposit types (e.g., Sedex, porphyry, Carlin-type, epithermal, and hot spring deposits) that formed repeatedly between the Devonian and Miocene time along the trends. Interestingly, the large Cretaceous Alaska-Yukon intrusion-related gold deposits (e.g., Fort Knox) are associated with the northern extension of the same lithospheric margin in the Selwyn basin, which experienced an analogous series of geologic events. ?? Springer-Verlag 2006.

Mineralium Deposita↗

The Reocín zinc-lead deposit, Spain: paleomagnetic dating of a late Tertiary ore body

The Reocín mine in northern Spain’s Basque–Cantabrian basin exploited a world-class Mississippi Valley-type Zn–Pb deposit. Its epigenetic mineralization is in Urgonian 116 ± 1 Ma dolomitized limestones of the Santillana syncline, which was formed by Oligocene and mid Miocene pulses of the Pyrenean orogeny. Paleomagnetic results (22 sites, 274 specimens) in mineralization isolated a stable remanence (ChRM) in pyrrhotite and minor magnetite inclusions in ore specimens, Zn concentrate, and tailings. A fold test shows that the ChRM is substantially post-folding. The mineralization’s paleopole lies on the European apparent polar wander path and indicates that the mineralization was formed at 15 ± 10 Ma. We postulate that brines originated in underlying Triassic and Lower Cretaceous sedimentary rocks and were driven upward into the host rocks by the hydraulic gradient created by the nearby Asturian massif.

Basque-Cantabrian basin↗

Re-Os systematics and age of pyrite associated with stratiform Zn-Pb mineralization in the Howards Pass district, Yukon and Northwest Territories, Canada

Stratiform Zn-Pb deposits hosted in unmetamorphosed carbonaceous and siliceous mudstones of the Ordovician to Silurian Duo Lake Formation define the Howards Pass district in Yukon Territory and Northwest Territories, western Canada. Collectively, the deposits are amongst the largest in the world, containing drill-indicated and inferred resources of 423 Mt at 4.84 % Zn and 1.59 % Pb. Sulphide textures include (a) fine-scale laminations of sphalerite, galena, and pyrite from <0.05 mm to 1 cm thick, interbedded with carbonaceous sedimentary rock; (b) layers of coarse sulphide that are structurally controlled by microfolds; and (c) veins that cut bedding and sulphide laminations. The finely interlaminated nature of sulphides with mudstone has been used as evidence for syngenetic mineralizing processes, whereas paleomagnetic data determined on coarse layered sulphides suggest a Middle Jurassic age of mineralization. Here, we present new rhenium-osmium (Re-Os) isotopic data for 12 pyrite separates obtained from 4 laminated sulphide-rich samples from the XY Central (XYC) and Don (DON) deposits and for 1 unmineralized organic-rich mudstone ∼20 m stratigraphically below the sulphide-bearing zone. Pyrite separates that lack mudstone inclusions (“pure”) from the XYC deposit contain 2.2 to 4.0 ppb Re and 93.4 to 123.4 ppt Os; pure pyrite from the DON deposit is significantly more enriched in Re and Os (34–37 ppb Re; 636.8–694.9 ppt Os). The 187 Re/ 188 Os values of pure pyrite separates from the XYC and DON deposits range from 137.6 to 197 and 182.1 to 201.4, respectively. Regression of all pure pyrite Re-Os data from both deposits yields an isochron age of 442 ± 14 Ma (MSWD = 7.4) and an initial 187 Os/ 188 Os (Os i ) value of 0.71 ± 0.07. The Re-Os age indicates that the early phase of pyrite precipitation (and by inference, sphalerite and galena) occurred during the early Silurian, consistent with biostratigraphic ages of the host rocks. The Os i value of ∼0.8 for earliest Silurian seawater recorded from organic-rich shale in the basal Silurian Global Stratotype Section and Point (GSSP) at Dobs Linn, Scotland is very similar to that provided by the Howards Pass pyrite regression and hence suggests a hydrogenous (seawater) source of Os for the pyrite. Therefore, two possible sources of Os are (1) the Zn- and Pb-bearing hydrothermal fluid that leached Os from footwall sedimentary rocks, which were deposited in seawater, or (2) directly from seawater during precipitation of the pyrite, which suggests that the Os content of the hydrothermal fluid was minor relative to that of seawater.

Northwest Territories, Yukon↗

Insights into Mountain Pass carbonatite formation from in-situ sulfur isotopes and geochemistry of sulfate and sulfide minerals

The Mountain Pass carbonatite stock hosts a world-class rare earth element deposit and may be classified as a carbonate-sulfate igneous rock, as it contains on average > 50 volume percent carbonate minerals and 20 to 30 volume percent sulfate minerals. The sulfates range in composition from barite to celestine and locally occur with sparse sulfide minerals. We investigate the origin of sulfur enrichment and the occurrence of sulfur-bearing minerals in the Mountain Pass carbonatite with in-situ sulfur isotope and mineral chemistry. Barite cores with δ 34 S of 1 to 3‰ do not coexist with sulfides, whereas celestine rims with δ 34 S of > 3‰ are associated with sulfides with δ 34 S < -10‰. We propose a model in which sulfur-bearing sediments were subducted during episodes of plate convergence in the Mojave Province that preceded Mountain Pass magmatism. Metasomatism of the overlying mantle by melts derived from the subducted sediments generated an unusually carbon- and sulfur-rich source to yield carbonatite magmas. Sulfur from primary carbonatite magmas and ~ 1 to 7% sulfur from subducted sediment melts yielded a slightly enriched δ 34 S composition (relative to depleted mantle δ 34 S of -1‰) for early crystallizing barite. Celestine rims on magmatic barite cores formed at low, hydrothermal temperatures (< 350 °C) based on S isotope thermometry for equilibrium celestine-galena and celestine-pyrite pairs. The sparse sulfides in the carbonatite stock are not in equilibrium with the primary barite cores and therefore do not permit S isotope thermometry estimates of magmatic temperatures. The S/Se ratios of sulfide minerals (> 3,400) typically exceed primitive mantle values (S/Se of 3,340), also consistent with their derivation from hydrothermal fluids. Trace occurrences of sulfide and sulfate minerals in alkaline silicate stocks related to the carbonatite stock have similar δ 34 S compositions and yield similarly low formation temperatures, suggesting regionally extensive and chemically similar sulfur-bearing hydrothermal fluids that imparted lithologically diverse rocks with a consistent sulfur isotope fingerprint.

California, Nevada↗

Major brazilian gold deposits - 1982 to 1999

Brazil has been a major but intermittent producer of gold since its discovery in 1500. Brazil led the world in gold production during the 18th and early 19th centuries. From the late 19th century to the late 20th century, total mining company and garimpeiro production was small and relatively constant at about 5 to 8 t/year. The discovery of alluvial deposits in the Amazon by garimpeiros in the 1970s and the opening of eight mines by mining companies from 1983 to 1990 fueled a major boom in Brazil's gold production, exceeding 100 t/year in 1988 and 1989. However, garimpeiro alluvial production decreased 'rapidly in the 1990s, to about 10 t/year by 1999. Company production increased about tenfold from about 4 t/year in 1982 to 40 t in 1992. Production from 1992 to the present remained relatively stable, even though several mines were closed or were in the process of closing and no new major mines were put into production during that period. Based on their production history from 1982-1999, 17 gold mines are ranked as major (> 20 t) and minor (3-8 t) mines. From 1982-1999, deposits hosted in Archean rocks produced 66% of the gold in Brazil, whereas deposits in Paleoproterozoic and Neoproterozoic rocks accounted for 19% and 15%, respectively. Deposits in metamorphosed sedimentary rocks, especially carbonate-rich rocks and carbonate iron-formation, yielded the great bulk of the gold. Deposits in igneous rocks were of much less importance. The Archean and Paleoproterozoic terranes of Brazil largely lack base-metal-rich volcanogenic massive sulfide deposits, porphyry deposits, and polymetallic veins and sedimentary exhalative deposits. An exception to this is in the Caraja??s Mineral Province.

Mineralium Deposita↗

Polar organic chemical integrative sampling and liquid chromatography- electrospray/ion-trap mass spectrometry for assessing selected prescription and illicit drugs in treated sewage effluents

The purpose of the research presented in this paper was twofold: (1) to demonstrate the coupling of two state-of-the-art techniques: a time-weighted polar organic chemical integrative sampler (POCIS) and microliquid chromatography–electrospray/ion-trap mass spectrometry and (2) to assess the ability of these methodologies to detect six drugs (azithromycin, fluoxetine, omeprazole, levothyroxine, methamphetamine, methylenedioxymethamphetamine [MDMA]) in a real-world environment, e.g., waste water effluent. In the effluent from three wastewater treatment plants (WWTPs), azithromycin was detected at concentrations ranging from 15 to 66 ng/L, which is equivalent to a total annual release of 1 to 4 kg into receiving waters. Detected and confirmed in the effluent from two WWTPs were two illicit drugs, methamphetamine and MDMA, at 2 and 0.5 ng/L, respectively. Although the ecotoxicologic significance of drugs in environmental matrices, particularly water, has not been closely examined, it can only be surmised that these substances have the potential to adversely affect biota that are continuously exposed to them even at very low levels. The potential for chronic effects on human health is also unknown but of increasing concern because of the multiuse character of water, particularly in densely populated, arid areas.

Archives of Environmental Contamination and Toxico↗

Lead poisoning of waterfowl by contaminated sediment in the Coeur D'Alene River

The Coeur d'Alene River basin in Idaho has been contaminated by mine tailings that have impaired the health of wildlife since the early 1900s. In other parts of the world, virtually all lead poisoning of waterfowl is caused by the ingestion of manmade lead artifacts, primarily spent lead shotshell pellets or, occasionally, fishing sinkers. However, in the Coeur d'Alene River basin in Idaho, nonartifactual lead poisoning was the ultimate cause of death of most of 219 (77%) of 285 waterfowl carcasses that had been found sick or dead from 1992 through 1997. The majority of these 219 waterfowl (172 tundra swans [Cygnus columbianus], 33 Canada geese [Branta canadensis], and 14 other species) were poisoned by ingesting river sediment that was contaminated with lead. The next most common cause of death (20 instances, 7%) was lead poisoning accompanied by ingested shotshell pellets. The remaining 46 waterfowl succumbed to trauma, infectious diseases (aspergillosis, avian cholera, tuberculosis), or miscellaneous problems, or the cause of death was not determined.

Idaho↗

Mercury from mineral deposits and potential environmental impact

Mercury deposits are globally distributed in 26 mercury mineral belts. Three types of mercury deposits occur in these belts: silica-carbonate, hot-spring, and Almaden. Mercury is also produced as a by-product from several types of gold-silver and massive sulfide deposits, which account for 5% of the world's production. Other types of mineral deposits can be enriched in mercury and mercury phases present are dependent on deposit type. During processing of mercury ores, secondary mercury phases form and accumulate in mine wastes. These phases are more soluble than cinnabar, the primary ore mineral, and cause mercury deposits to impact the environment more so than other types of ore deposits enriched in mercury. Release and transport of mercury from mine wastes occur primarily as mercury-enriched particles and colloids. Production from mercury deposits has decreased because of environmental concerns, but by-product production from other mercury-enriched mineral deposits remains important.

Environmental Geology↗