USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Mountain Geologist”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 68Linked to original sources
USGS2025

A 700-year rupture sequence of great eastern Aleutian earthquakes from tsunami modeling of stratigraphic records

Great Aleutian underthrusting earthquakes produced destructive tsunamis impacting Hawaiʻi in 1946 and 1957. Prior modeling of the 1957 tsunami deposit and runup records on eastern Aleutian and Hawaiian Islands jointly with tide-gauge observations across the Pacific Ocean constrained a rupture model with shallow slip up to 26 m along 600 km of the plate boundary. Here we implement this modeling approach to older deposits and show alternating deep and shallow megathrust slip up to 26, 32, and 22 m for great earthquakes along the same segment in the 18 th , 15 th , and 14 th centuries. All three modeled prehistoric Aleutian earthquakes produce tsunami inundation in Hawaiʻi with the most severe, 14 th century event having impacts exceeding the 1957 event. The along-dip variability of these four ruptures spanning seven centuries provides insights on earthquake cycles for engineering design and hazard assessment. The 15 th century and 1957 rupture models provide evidence for recurrence of tsunami earthquakes, which can produce disproportionately large tsunamis for a given moment magnitude due to reduced rigidity in the shallow megathrust. The 14 th and 18 th century events likely ruptured deeper regions that did not slip in 1957, suggesting potential for corresponding deeper failure in the next great eastern Aleutian earthquake.

Alaska, Hawaii↗
USGS1989

Techniques for simulating flood hydrographs and estimating flood volumes for ungaged basins in east and west Tennessee

A dimensionless hydrograph developed for a variety of basin conditions in Georgia was tested for its applicability to streams in East and West Tennessee by comparing it to a similar dimensionless hydrograph developed for streams in East and West Tennessee. Hydrographs of observed discharge at 83 streams in East Tennessee and 38 in West Tennessee were used in the study. Statistical analyses were performed by comparing simulated (or computed) hydrographs, derived by application of the Georgia dimensionless hydrograph, and dimensionless hydrographs developed from Tennessee data, with the observed hydrographs at 50 and 75% of their peak-flow widths. Results of the tests indicate that the Georgia dimensionless hydrography is virtually the same as the one developed for streams in East Tennessee, but that it is different from the dimensionless hydrograph developed for streams in West Tennessee. Because of the extensive testing of the Georgia dimensionless hydrograph, it was determined to be applicable for East Tennessee, whereas the dimensionless hydrograph developed from data on streams in West Tennessee was determined to be applicable in West Tennessee. As part of the dimensionless hydrograph development, an average lagtime in hours for each study basin, and the volume in inches of flood runoff for each flood event were computed. By use of multiple-regression analysis, equations were developed that relate basin lagtime to drainage area size, basin length, and percent impervious area. Similarly, flood volumes were related to drainage area size, peak discharge, and basin lagtime. These equations, along with the appropriate dimensionless hydrograph, can be used to estimate a typical (average) flood hydrograph and volume for recurrence-intervals up to 100 years at any ungaged site draining less than 50 sq mi in East and West Tennessee.

Tennessee↗
USGS2025

Borehole geophysical time-series logging to monitor passive ISCO treatment of residual chlorinated-ethenes in a confining bed, NAS Pensacola, Florida

In-situ chemical oxidation (ISCO) is a common method to remediate chlorinated ethene contaminants in groundwater. Monitoring the effectiveness of ISCO can be hindered because of insufficient observations to assess oxidant delivery. Advantageously, potassium permanganate, one type of oxidant, provides the opportunity to use its strong electrical signal as a surrogate to track oxidant delivery using time-series borehole geophysical methods, like electromagnetic (EM) induction logging. Here we report a passive ISCO (P-ISCO) experiment, using potassium permanganate cylinders emplaced in boreholes, at a chlorinated ethene contamination site, Naval Air Station Pensacola, Florida. The contaminants are found primarily at the base of a shallow sandy aquifer in contact with an underlying silty-clay confining bed. We used results of the time-series borehole logging collected between 2017 and 2022 in 4 monitoring wells to track oxidant delivery. The EM-induction logs from the monitoring wells showed an increase in EM response primarily along the contact, likely from pooling of the oxidant, during P-ISCO treatment in 2021. Interestingly, concurrent natural gamma-ray (NGR) logging showed a decrease in NGR response at 3 of the 4 wells possibly from the formation of manganese precipitates coating sediments. The coupling of time-series logging and well-chemistry data allowed for an improved assessment of passive ISCO treatment effectiveness.

Florida↗
USGS2026

The value of electronic tagging and tracking studies for understanding fish–hypoxia interactions

Objective Hypoxia (i.e., low dissolved oxygen availability) is a natural phenomenon but can also be induced by human activities (e.g., nutrient enrichment from runoff). Given that dissolved oxygen is essential for aquatic life, periods of hypoxia tend to have negative consequences (e.g., sublethal disturbances, mortality) for most fishes. Extensive laboratory research has documented hypoxia thresholds and physiological and behavioral outcomes for a variety of freshwater and marine fishes and there is also an extensive body of fieldwork assessing population-level responses (e.g., survival, distribution). Yet, studying how individual fish respond to hypoxia in the wild has proved challenging; electronic tagging and tracking tools (e.g., biotelemetry, biologging) have made it easier to study individual responses to hypoxia and complement other tools like hydroacoustics that tend to focus on population-level responses. Methods We review what has been learned from contemporary studies that employ electronic tagging and tracking tools to understand how fish respond to hypoxia in the wild. Topics explored include identifying and validating hypoxia thresholds, habitat compression, connectivity, mortality, physiological and bioenergetic consequences, and extreme weather conditions. We also consider what we have learned about evaluating various management plans for hypoxia and reflect on how electronic tags have also been used in aquaculture systems and in hybrid studies that combine laboratory and field research. We highlight fishes in Lake Erie as a research narrative to demonstrate how electronic tagging and tracking have markedly improved our understanding of a longstanding hypoxia issue. Results Our synthesis revealed that electronic tagging and tracking have provided critical information on how fish respond to hypoxia in the field, revealing complex trade-offs and compensatory mechanisms as well as cryptic hypoxia-induced mortality. Beyond just illuminating space use and mortality, tags equipped with various sensors are revealing how fish deal with hypoxia in real time in terms of physiology, bioenergetics, and behavior. Conclusions As electronic tagging and tracking methods experience further innovation and are increasingly applied to understand the effects of hypoxia on fish, we expect more unanticipated findings about the effects of hypoxia on fish in all aquatic ecosystems, which will strengthen our ability to manage and mitigate hypoxia. Combining tools and approaches (e.g., lab and field) is perhaps the best way to generate comprehensive understanding.

Transactions of the American Fisheries Society↗
USGS2024

Mitigating climate change by abating coal mine methane: A critical review of status and opportunities

Methane has a short atmospheric lifetime compared to carbon dioxide (CO 2 ), ∼decade versus ∼centuries, but it has a much higher global warming potential (GWP), highlighting how reducing methane emissions can slow the rate of climate change. When considering the contribution of greenhouse gas (GHG) emissions to current global warming (2010–2019) relative to the industrial revolution (1850–1900) levels, methane contributes 0.5 °C or ∼ a third of the total. The most recent post-2023 global estimates of methane emissions by bottom-up (BU) and top-down (TD) approaches for the coal mining sector are in the range of ∼41 ± 3 Tg yr −1 and 33 ± 5 Tg yr −1 , respectively. This divergence, notwithstanding overlapping confidence intervals, is a result of differences between applied TD global inversion models and BU emission inventories. Further research can help to better refine emissions from the various contributing coal mine methane (CMM) emissions sources. The coal mining sector accounts for over 10 % of global anthropogenic methane emissions. The contribution of CMM emissions to the global budget have increased since 2000, although upward and downward regional trends have been observed.

International Journal of Coal Geology↗
USGS2025

Critical minerals in mine waste

Introduction Critical minerals are commodities with vulnerable supply chains that play a vital role in supporting the United States’ economy, national defense and security, emerging technologies, and energy independence. The prosperity of our Nation depends on generating a resilient supply of domestic critical minerals; mine waste may be an untapped source of these commodities. Mine waste from centuries of legacy mining persist on the landscape and may contain critical minerals and other valuable commodities previously deemed uneconomic to recover. At modern mines, the financial viability of recovering byproduct critical minerals, which are not the primary target, may be marginal and can ultimately destine them to mine waste. Further, mine waste can be a liability for the mining company or, at legacy mines, the taxpayer because of its effect on the landscape. The U.S. Geological Survey (USGS) has several initiatives to evaluate critical mineral resources in various types of waste. This factsheet highlights studies of mine waste carried out by USGS scientists at the Geology, Energy & Minerals Science Center in collaboration with other science centers funded through the USGS Mineral Resources Program. Recovery of critical minerals from mine waste can aid in remediation efforts and increase domestic supply of vital mineral resources.

Fact Sheet↗
USGS2025

Evaluation of solid bitumen created from marine oil shale bituminite under hydrous and anhydrous pyrolysis conditions

To test the influence of environmental conditions on aromaticity of solid bitumen generated during petroleum generation, four organic-rich (26–36 wt% total organic carbon) oil shale samples collected from the Neoproterozoic–Lower Cambrian restricted marine Salt Range Formation in the upper Indus Basin, Pakistan, were pyrolyzed under hydrous and anhydrous conditions. Experiments used closed system batch reactors at subcritical water temperatures between 300 and 370°C for 72 h. Thermal conversion of bituminite in the Salt Range oil shales created a newly formed solid bitumen, similar to previous observations from experiments on the Eocene lacustrine Green River Formation Mahogany zone oil shale. Newly formed solid bitumen in the Salt Range Formation oil shales generally has higher reflectance (R o ) in hydrous residues compared to anhydrous experiments subjected to the same time-temperature conditions, also similar to prior observations. This finding supports the hypothesis that radical disproportionation is favored in the presence of hydrogen contributed by water, promoting aromatization in the solid bitumen residue with concomitant increased expulsion of saturated hydrocarbons. Indigenous solid bitumen (and vitrinite in a comparison sample) also shows higher reflectance values in hydrous versus anhydrous residues, indicating that additional aromatization in the presence of exogenous hydrogen occurs both in newly formed organic matter and in organic matter that is present throughout the experiment. Despite similarities in their bulk rock geochemical screening parameters, R o evolution shows different trajectories amongst the four Salt Range oil shales, suggesting as-yet undetermined differences in kinetic properties which are probably related to differences in a priori chemical composition. These results have implications for the use of solid bitumen reflectance (BR o ) as a thermal proxy, suggesting BR o values and appearance could vary as a function of the concentration of water. Variation in water concentration may be present at the reservoir or formation scale, but may also be present at a much finer scale in tight oil shales where permeability is several orders of magnitude lower than conventional reservoirs. Therefore, local variations in the presence of water potentially could explain substantial variation in BR o values and appearance in closely spaced source rock samples and even within an individual microscope field.

Journal of Analytical and Applied Pyrolysis↗
USGS2025

Relating systematic molecular and textural properties of graptolite pyrolyzed via gold tube hydrous pyrolysis: Implications for thermal proxies in lower Paleozoic marine shales

A series of gold tube pyrolysis experiments (72 h, 300–550 °C, 50 MPa) conducted on a graptolite-rich lower Paleozoic marine shale generated pyrolysis residues for a comprehensive evaluation of the molecular and structural variability of three types of graptolite periderm. Organic petrology, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS) were combined to evaluate the thermal evolution process. The three types of graptolite periderm, namely granular, non-granular, and nodular graptolite, were analyzed by Raman spectroscopy wherein point measurements were obtained after the maceral was identified and the location verified by organic petrology. Distinct thermal evolution pathways among non-granular, granular, and nodular graptolite periderms were recorded. The evolution patterns of the Raman parameters, particularly D1 and G bands, highlight the differences in geochemical composition of the graptolite periderm types and the alteration of molecular structure with increasing thermal maturity. Raman parameters D1 (position of the D1 peak), G-FWHM (full width at half maximum of the G peak), and ratios D1-FWHM/G-FWHM (full width at half maximum of the D1 peak ratioed to G-FWHM) and A D1 /A G (ratio of D1 and G peak intensities) showed effectiveness in assessing thermal maturity. Bireflectance with increasing gold tube pyrolysis temperature followed a hierarchy: non-granular > granular > nodular, reflecting different molecular alignment intensities. Qualitative FE-SEM evaluation showed that fine-grained mineral inclusions (primarily Fe-sulfide as determined via EDS) were associated with the graptolite populations, with granular graptolite containing greater amounts of coarser-grained (e.g., ∼300–1400 nm) mineral inclusions relative to non-granular and nodular graptolite, which contain finer-grained (e.g., ∼100–200 nm) inclusions difficult to resolve with optical microscopy. These findings are investigated to highlight the mechanisms that drive organic matter evolution within graptolite during thermal maturation, as well as to explore some of the limitations of using spectroscopic parameters as thermal maturity proxies.

International Journal of Coal Geology↗
USGS2026

Global performance of remote sensing-based and reanalysis-driven models to estimate open water evaporation

Evaporation plays an essential role in the water cycle, influencing local and regional climates while directly impacting water availability in lakes. However, directly measuring evaporation over water bodies remains challenging due to the high costs of installing and maintaining the required in situ instrumentation. Although several remote sensing algorithms have been providing evaporation estimates, the lack of a global validation hinders our understanding of their relative uncertainties and performances across different regions. Here, we analyze the performance of a suite of models that leverage satellite data and meteorological reanalysis to estimate evaporation over lakes worldwide. We compare 3 remote sensing-based models, 1 reanalysis-driven model and 1 ensemble approach, using in situ observations from 27 lakes representing a diverse range of geographic and climatic regions. Our results demonstrate that, overall, the ensemble outperformed any individual model in terms of accuracy, with a RMSE and a bias of 1.3 and 0.3 mm day −1 , respectively. These findings highlight the benefits of using an ensemble approach to estimate open water evaporation with satellite-based models at the global scale, leveraging the unique strengths of each model. For the individual models, differences in the representation of heat storage changes and advection effects led to lower values of RMSE and bias, depending on the location and depth of the lakes. This study sets the path for future improvement of open water evaporation algorithms globally, while remote sensing techniques are proven satisfactory to monitoring of water loss in lakes globally, an essential step toward effective large-scale water resources management.

Water Resources Research↗
USGS2024

Complex landslide patterns explained by local intra-unit variability of stratigraphy and structure: Case study in the Tyee Formation, Oregon, USA

Lithology and geologic structure are important controls on landslide susceptibility and are incorporated into many regional landslide hazard models. Typically, metrics for mapped geologic units are used as model input variables and a single set of values for material strength are assumed, regardless of spatial heterogeneities that may exist within a map unit. Here we describe how differences in bedding thickness, grain size, inferred uniaxial compressive strength, and bedding dip control the inherent susceptibility of slopes to deep-seated failure within a single mapped geologic unit - the Tyee Formation of Oregon, USA. The Tyee, which covers over 15,000 km2 and underlies much of the Oregon Coast Range, comprises gently folded alternating beds of sandstone and siltstone deposited as turbidites, forming a 2-km thick Eocene submarine fan which has been uplifted and exhumed through the Cenozoic. Deep-seated landslides are widespread in the Tyee, but form a complex spatial pattern such that landslide density ranges from 0 to 24% of the total landscape area. These slides are often extensive and sufficiently deep to reduce local hillslope gradients, resulting in a strong negative correlation between landslide density and mean local slope. Mean annual precipitation and predicted strong ground motions from Cascadia earthquake scenarios also fail to explain the spatial distribution of deep-seated landslides. Consequently, landslide stability models, which are strongly influenced by landscape slope, pore-water pressure, and seismic acceleration, yield landslide susceptibility maps which are broadly anti-correlated with mapped deep-seated landslide density. Through a multivariable linear regression model, we show that much of the variance in deep-seated landslide density can be explained by variability of intra-unit stratigraphic and structural characteristics, which we measure at 128 sites across two study areas totaling ∼3000 km2. Our results suggest bedding dip is only weakly correlated to landslide density, but strongly influences landslide failure style. Subtle increases in bedding dip, even in the gently folded Tyee Formation, result in a substantially higher likelihood of a landslide being cataclinal, or parallel to bedding. Overall, we find a slight majority of landslides fail within these cataclinal slopes, and that these landslides tend to be larger than non-cataclinal landslides. We also show that the lithological and structural properties that influence landslide susceptibility are distinct for these two populations of landslides. Our results demonstrate how localized, intra-unit, geologic variability can exert strong control on landslide susceptibility and failure style. This suggests that in some locations, landslide hazard models could be significantly improved by incorporating detailed, spatially variable, geologic properties rather than relying solely on generalized geologic map units.

Oregon↗
USGS2024

Framework for implementing damping scaling factors in U.S. Geological Survey National Seismic Hazard Models

Traditionally, probabilistic seismic hazard analysis (PSHA) has focused on calculating ground motion hazard curves for elastic, 5%-damped pseudo spectral accelerations, Sa(T,5%), which are used as the basis for engineering design parameters and targets for ground motion selection and modification. However, structures and geotechnical systems can exhibit a wide range of damping ratios both above and below the 5% level, depending on the construction material, structural system, nonstructural elements, or subsurface soil properties. When spectral parameters at such damping levels are required for certain applications, 5%-damped accelerations have traditionally been extracted from PSHA-based hazard curves and adjusted outside of the hazard integral using damping scaling factors (DSF) such as those from Newmark & Hall (1982). Recent advances in the development of more rigorous and comprehensive damping scaling models (e.g., Rezaeian et al., 2014; Rezaeian et al., 2021) have allowed for the modeling of means and standard deviations of DSFs as functions of earthquake source and path properties for crustal, intraslab, and subduction interface tectonic environments. These DSF models can be applied to ground motion model (GMM) estimates of Sa(T,5%) for a given earthquake rupture scenario to produce a corresponding mean and standard deviation Sa at a specified damping ratio β, Sa(T,β). In this study, the DSF models of Rezaeian et al. (2014) and Rezaeian et al. (2021) are implemented within the U.S. Geological Survey National Seismic Hazard Model (NSHM) PSHA framework to calculate probabilistic hazard curves for spectral accelerations at damping ratios from 0.5% to 30%. The DSF models are applied directly to the mean and standard deviation of Sa(T,5%) predictions from each GMM in the NSHM logic tree. Resulting hazard curves and uniform hazard and risk spectra for Sa(T,β) are presented for several geographic locations and compared with corresponding spectra estimated using current design practices by applying the same DSFs outside of the PSHA calculation. Key differences between the two methods for estimating Sa(T,β) are discussed, and potential strategies are presented for the implementation and usage of the hazard-consistent Sa(T,β) in building codes. Comparing the results to those from DSFs used in current design practices that are mainly based on Newmark & Hall (1982) is not explored in this study.

Conference Paper↗
USGS2025

Emerging investigator series: Post-wildfire sediment geochemical characterization reveals manganese reactivity and a potential link to water quality impairment in the Gallinas Creek watershed, New Mexico

Water quality post-wildfire is often impaired by increased turbidity and elevated concentrations of elements such as manganese (Mn) and iron (Fe). Precipitation events exacerbate these issues, due in part to increased erosion and transport of sediment from hillslopes to surface water. Both Mn and Fe are major redox-active elements in sediments that drive a variety of biogeochemical cycles, precipitate adsorptive phases, and can themselves be drinking water contaminants. By investigating Mn and Fe sediment geochemistry in post-wildfire sediment deposits, related water quality hazards can be assessed. To establish and strengthen this connection, we analyzed the geochemistry of sediment deposits and surface water in the Gallinas Creek watershed, New Mexico over 1.5 years post-wildfire. Analyses included particle size analysis, water extractions, sequential extractions and aqua regia extractions to determine metal partitioning in sediment deposits. Data demonstrate Mn concentrations were distributed across labile and reactive fractions, such as the exchangeable and oxyhydroxide fractions, while Fe concentrations were mainly associated with the residual fraction. Manganese concentrations in aqua regia extractions and several fractions of sequential extractions were also strongly and significantly correlated with fine-grained sediment while the same pools of Fe concentrations were not. Dissolved Mn concentrations in surface water were elevated (>50 μg L −1 ) multiple times over the 1.5 years post-wildfire, highlighting a relationship between sediment geochemistry and water quality. This work shows Mn in sediments mobilized post-wildfire has an influence on water quality and highlights how further investigation into Mn sediment redox processes and mineralogy post-wildfire can inform risk assessments and resource management.

New Mexico↗
USGS2025

Prospectivity mapping for geologic hydrogen

Geologic, or naturally occurring, hydrogen has the potential to become a new, low-carbon, primary energy resource. Often referred to as “white” or “gold” hydrogen, this gas occurs naturally in the Earth’s subsurface, similar to petroleum resources. However, unlike petroleum, which releases carbon dioxide when burned, burning hydrogen only produces water as a byproduct. Exploration for geologic hydrogen remains in an early stage and discoveries of high concentrations of subsurface hydrogen are still relatively rare. To facilitate research and exploration for this potential resource, this report presents the first publicly available prospectivity map of geologic hydrogen accumulations in the conterminous United States. Prospective regions are those regions in which all major components necessary for a hydrogen accumulation likely are present—a source of sufficient hydrogen generation, porous reservoirs for storage, and seals to prevent leakage. The midcontinent region of the United States and the central California coast are revealed as having high prospectivity. This analysis also identifies previously unrecognized prospective regions that may be favorable due to long distance lateral migration of subsurface hydrogen, such as the offshore eastern seaboard of the United States, and can provide a linkage between surface observations of hydrogen degassing and far-field source regions. The methodology developed to create this map is expandable and flexible and may be adapted to incorporate new concepts in the hydrogen system and for application to other regions of the world.

conterminous United States↗
USGS1993

Ground-water quality near an inactive landfill and sludge-spreading area, Tallahassee, Florida

Ground-water quality of a 120-acre area encompassing an inactive landfill southwest of Tallahassee, Florida, was assessed by installing and sampling 21 monitoring wells. Sludge from a municipal sewage-treatment plant was also applied to the land surface near the landfill site. Water samples were collected from the 21 monitoring wells from June 1987 through September 1990 and analyzed for concentrations of major ions, nitrogen species, trace metals, field measurements, and more than 140 organic constituents. Water quality in the Upper Floridan aquifer at the study site was compared to background water quality in other areas of Leon County. Ground-water quality of the study site was evaluated by the location of wells sampled in relation to the landfill and the sludge-spreading areas. Results of nonparametric statistical analysis indicated that potassium and nitrite plus nitrate as nitrogen concentrations in water samples from wells completed in the Upper Floridan aquifer at the study site were significantly different at the 5 percent probability level from those in samples from background wells completed in this aquifer in Leon County. Median potassium concentrations were 0.4 mg/L (milligrams per liter) in water from wells at the study site and 0.7 mg/L in water from background wells in Leon County. Median nitrite plus nitrate concentrations were 6.48 mg/L in water samples from wells at the study site and 0.51 mg/L in water samples from background wells. Graphical comparison of the water quality characteristics in water from six categories of wells; upgradient, landfill, adjacent to the landfill, downgradient onsite, downgradient offsite, and background Leon County, indicated that sodium, bicarbonate, sulfate, iron, manganese, and dissolved solids concentrations and specific conductance values were highest within the landfill. Upgradient and downgradient well categories include wells in areas affected by sludge spreading. Localized reducing conditions were indicated in a downgradient area by median iron concentrations of 930 and 30 ug/L (micrograms per liter) in samples from wells only 5 feet apart. Nitrite plus nitrate concentrations were lowest in water from wells in the landfill compared to water from the other categories. Concentrations of most trace elements and organic compounds were mostly below detection limits, although State maximum contaminant levels of 1 ug/L for benzene and vinyl chloride and 3 ug/L for tetrachloroethene were exceeded in 14 samples. Concentrations of sodium, potassium, chloride, sulfate, nitrite plus nitrate, total organic and ammonia nitrogen, and ammonia nitrogen in ground water were statistically analyzed in areas affected by sludge-spreading and other areas. Only nitrite plus nitrate and chloride concentrations were significantly different between the two areas. Median nitrite plus nitrate and chloride concentrations in sludge-spreading areas were 6.9 mg/L and 2.9 mg/L, respectively, compared to 1.1 mg/L and 1.8 mg/L in other areas.

Florida↗
USGS2026

CRESCENT earthquake dynamic rupture, earthquake cycle, and tsunami code verification platform

Physics-based simulations are critical for understanding natural hazards. The increasing complexity of numerical codes requires benchmark exercises to verify that different computational methods yield consistent results when solving the same governing equations. Here, we present an open-access web platform designed for the verification of earthquake dynamic rupture, seismic cycle, and tsunami simulations. The platform architecture utilizes a modular, serverless backend on Amazon Web Services (AWS) to provide scalable file processing and visualization. A lightweight static web application provides a secure interface for uploading and managing results, while the browser-based data visualization enables interactive analysis of time series and surface grid data. By using structured JavaScript Object Notation (JSON) text files to define benchmark structures, the system remains fully extensible, allowing the addition of new scenarios without modifying the underlying software logic. The platform hosts the "The Tsunami Problem Versions" (TTPV) 1 & 2, two benchmarks for 3D fully coupled earthquake dynamic rupture and tsunami generation, and provides a framework for earthquake cycle models. This community resource aims to build trust in numerical simulations and facilitate long-term collaborative code verification as modeling software continues to evolve.

Seismica↗
USGS2025

Woods Hole Coastal and Marine Science Center—2023 annual report

The 2023 annual report of the U.S. Geological Survey Woods Hole Coastal and Marine Science Center highlights accomplishments of 2023, includes a list of 2023 publications, and summarizes the work of the center, as well as the work of each of its science groups. This product allows readers to gain a general understanding of the focus areas of the center’s scientific research and learn more about specific projects and progress made throughout 2023, all while enjoying photographs taken in various environments and laboratories, and applicable maps and figures.

Circular↗
USGS2026

Woods Hole Coastal and Marine Science Center—2024 annual report

The 2024 annual report of the U.S. Geological Survey Woods Hole Coastal and Marine Science Center highlights accomplishments of 2024, includes a list of 2024 publications, and summarizes the work of the center, as well as the work of each of its science groups. This product allows readers to gain a general understanding of the focus areas of the center’s scientific research and learn more about specific projects and progress made throughout 2024, all while enjoying photographs taken in various environments and laboratories, and applicable maps and figures.

Circular↗
USGS2025

Synergy between geology and geophysics in graphite mineral resource assessment

Graphite is designated as a critical mineral by the U.S. Government due to its essential role in modern technology and its vulnerability to supply chain disruption. To evaluate domestic graphite resources, the U.S. Geological Survey (USGS) conducted two airborne electromagnetic (AEM) surveys as part of the Earth Mapping Resources Initiative (Earth MRI) over prospective areas in the southern Appalachians of Alabama and the Seward Peninsula of Alaska. These surveys aimed to refine areas of interest by revealing subsurface electrical resistivity patterns indicative of graphite-bearing rocks. The results of the AEM surveys were integrated with existing geological knowledge and supplemented by field observations to assess the likelihood of undiscovered resources in these regions. This multidisciplinary approach combined geophysical techniques with traditional geological methods, enhancing the understanding of graphite potential in areas that may have been previously overlooked. The findings from this initiative are expected to contribute significantly to the ongoing efforts to secure a reliable domestic supply of graphite, thereby reducing import reliance and supporting national interests in mineral resource management.

Conference Paper↗