USGS Science⌕ Search

SEARCH · USGS Science

Results for “New Zealand Journal of Geology and Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 68Linked to original sources
USGS2000

Regional evaluation of evapotranspiration in the Everglades

Nine sites in the Florida Everglades were selected and instrumented for collection of data necessary for evapotranspiration-determination using the Bowen-ratio energy-budget method. The sites were selected to represent the sawgrass or cattail marshes, wet prairie, and open-water areas that constitute most of the natural Everglades system. At each site, measurements necessary for evapotranspiration (ET) calculation and modeling were automatically made and stored on-site at 15- or 30-minute intervals. Data collected included air temperature and humidity at two heights, wind speed and direction, incoming solar radiation, net solar radiation, water level and temperature, soil moisture content, soil temperature, soil heat flux, and rainfall. Data summarized in this report were collected from January 1996 through December 1997, and the development of site-specific and regional models of ET for this period is described. Latent heat flux is the energy flux density equivalent of the ET rate. Modified Priestley-Taylor models of latent heat flux as a function of selected independent variables were developed at each site. These models were used to fill in periods of missing latent heat flux measurement, and to develop regional models of the entire Everglades region. The regional models may be used to estimate ET in wet prairie, sawgrass or cattail marsh, and open-water portions of the natural Everglades system. The models are not applicable to forested areas or to the brackish areas adjacent to Florida Bay. Two types of regional models were developed. One type of model uses measurements of available energy at a site, together with incoming solar energy and water depth, to estimate hourly ET. This available-energy model requires site data for net radiation, water heat storage, and soil heat flux, as well as data for incoming solar radiation and water depth. The other type of model requires only incoming solar energy, air temperature, and water depth data to provide estimates of hourly ET. The second model thus uses data that are more readily available than the data required for the available-energy model. Computed ET mean annual totals for all nine sites for the 1996-97 period ranged from 42.4 inches per year at a site where the water level is below land surface for several months each year to 57.4 inches per year at an open-water site with no emergent vegetation. Although the density of photosynthetically-active plant leaves has been shown to relate directly to ET in some studies, it does not appear to relate directly to ET in the Everglades, based on comparison of annual ET data with leaf-area index, defined as the Normalized Difference Vegetation Index (NDVI), data from satellite imagery. NDVI and ET appear to be inversely related in the Everglades. The greatest ET rates occurred at open-water sites where the NDVI data indicated the lowest leaf-area index. Among the remaining vegetated sites, there is no clear relation between ET and NDVI, though the highest ET rate corresponded to the lowest NDVI and one of the lowest ET rates corresponded to the highest NDVI value. The variation in ET follows a seasonal pattern, with lowest monthly ET totals occurring in December through February, and highest ET occurring in May through August. The greatest range in monthly ET among all nine sites for the 2-year period occurred at site 3: from 1.81 inches in December 1997 to 6.84 inches in July 1996. A study to compare the Bowen-ratio/energy balance method of ET measurement with the eddy-correlation method was done at one site from June 22, 1998, through September 28, 1998. This comparison indicated that both methods gave comparable values of the Bowen ratio, but there was a considerable difference in available energy measured by the two methods. The mean of all 30-minute measured turbulent heat fluxes from the eddy-correlation apparatus for June 22 through September 29, 1998, was 137.4 watts per square meter, and the mean of the corresponding measured energy was 163.6 watts per square meter, or about 20 percent greater. The disagreement in mean energy fluxes measured by the two methods is problematical and is not fully understood. Although the difference seems to be related to friction velocity, and is practically non-existent at values of friction velocity greater than 0.3 meter per second, the "correctness" of either method cannot be determined with the data available.

Florida↗
USGS2025

Ultramafic float rocks at Jezero crater (Mars): Excavation of lower crustal rocks or mantle peridotites by impact cratering?

Based on observation and data from meteorites and in situ scientific missions, experiments as well as models, the Martian mantle is assumed to share some compositional and mineralogical affinity with the terrestrial mantle. However, there might be subtle differences like the Martian mantle being more ferroan. Yet, we do not have any direct analysis of a Martian mantle rock to confirm this assumption. NASA’s Perseverance rover found olivine-rich boulder-sized float rocks on the upper Jezero fan (Mars). These boulders have an ultramafic composition and their mineralogy is dominantly composed of Fo 73±3 olivine with high-Mg orthopyroxene, Cr-rich Ti-Fe oxides and minor plagioclase and high-Ca pyroxene. Microtextural and petrological analysis reveals that these minerals crystallized at equilibrium. In addition, these boulders are different from all the bedrocks analyzed by Perseverance along its traverse which are crustal igneous rocks and sediments. Comparing our data to Martian meteorites and available Mars bulk silicate models (BSM), we discuss that these boulders could represent primitive melts and/or lower crustal material, and we specifically hypothesize that they could be mantle peridotites. We propose that these putative mantle rocks could have been excavated by the succession of impacts from the shallow mantle or lower crust in the Isidis region where Jezero crater is located. These olivine-rich boulders could thereby constitute the first direct analysis of a Martian mantle rock.

Earth and Planetary Science Letters↗
USGS2024

A benchmark dataset and workflow for landslide susceptibility zonation

Landslide susceptibility shows the spatial likelihood of landslide occurrence in a specific geographical area and is a relevant tool for mitigating the impact of landslides worldwide. As such, it is the subject of countless scientific studies. Many methods exist for generating a susceptibility map, mostly falling under the definition of statistical or machine learning. These models try to solve a classification problem: given a collection of spatial variables, and their combination associated with landslide presence or absence, a model should be trained, tested to reproduce the target outcome, and eventually applied to unseen data. Contrary to many fields of science that use machine learning for specific tasks, no reference data exist to assess the performance of a given method for landslide susceptibility. Here, we propose a benchmark dataset consisting of 7360 slope units encompassing an area of about 4,100 km 2 "> 4,100 km 2 in Central Italy. Using the dataset, we tried to answer two open questions in landslide research: (1) what effect does the human variability have in creating susceptibility models; (2) how can we develop a reproducible workflow for allowing meaningful model comparisons within the landslide susceptibility research community. With these questions in mind, we released a preliminary version of the dataset, along with a “call for collaboration,” aimed at collecting different calculations using the proposed data, and leaving the freedom of implementation to the respondents. Contributions were different in many respects, including classification methods, use of predictors, implementation of training/validation, and performance assessment. That feedback suggested refining the initial dataset, and constraining the implementation workflow. This resulted in a final benchmark dataset and landslide susceptibility maps obtained with many classification methods. Values of area under the receiver operating characteristic curve obtained with the final benchmark dataset were rather similar, as an effect of constraints on training, cross–validation, and use of data. Brier score results show larger variability, instead, ascribed to different model predictive abilities. Correlation plots show similarities between results of different methods applied by the same group, ascribed to a residual implementation dependence. We stress that the experiment did not intend to select the “best” method but only to establish a first benchmark dataset and workflow, that may be useful as a standard reference for calculations by other scholars. The experiment, to our knowledge, is the first of its kind for landslide susceptibility modeling. The data and workflow presented here comparatively assess the performance of independent methods for landslide susceptibility and we suggest the benchmark approach as a best practice for quantitative research in geosciences.

Earth-Science Reviews↗
USGS2026

On-demand global Landsat evapotranspiration product: Development, evaluation, and dissemination

Global actual evapotranspiration (ET) is one of the essential climate variables needed to understand and manage the relationships among food, energy, and water resources. The U.S. Geological Survey Earth Resources Observation and Science (EROS) Center launched a provisional ET product in 2020, offering on-demand, field-scale global coverage derived from Landsat data through the EROS Science Processing Architecture (ESPA) platform. The ESPA interface provides ET data for cloud-free Landsat overpasses starting in 1982 with Landsat 4 through the current Landsat 9. The ET data are delivered as a Provisional Level-3 Science product created using the Operational Simplified Surface Energy Balance (SSEBop) model. Landsat surface temperature and reference ET are the main model drivers along with vegetation index and net radiation for model parameterization. A large volume of Landsat-based ET orders (e.g., over 1,200,000 images from June 2020 through December 2025) around the world indicate increasing awareness and application of the ET data. The ESPA platform enables land and water resource managers and researchers to access a first-order ET product without requiring advanced knowledge of remote sensing technology or evapotranspiration modeling. We present the methodology and workflow of the on-demand Landsat ET product and its performance evaluations over diverse hydro-climatic settings. The product can help estimate field-scale consumptive water use and thus quickly and consistently assess historical water use, allocation, and budget to inform water management under changing environments. Future ET data aggregated to monthly and seasonal time scales are expected to enhance integration with decision-making tools and procedures.

Remote Sensing of Environment↗
USGS2026

Modeled groundwater and surface-water interactions surrounding Mobile Bay, Alabama, 2008–15

The U.S. Geological Survey, in cooperation with the Gulf Coast Ecosystem Restoration Council, has used MODFLOW 6 to develop a groundwater-flow model to simulate groundwater and surface-water interactions in the Mobile Bay, Alabama, area. The model results indicated that, on average, groundwater discharge near the coastline is equal to 2.5 percent of the surface water that flows into the bay. The model was also used to determine how changes in recharge, sea level, and groundwater pumping affect groundwater levels and discharge rates. The results indicate that more groundwater discharge occurred in the winter and spring when recharge was higher, sea level was lower, and groundwater pumping was lower than during the summer and fall. Additionally, the amount of emergent groundwater was closely related to sea level; when sea level was higher, there was more area with emergent groundwater. Furthermore, the depth of nonemergent groundwater was related to trends in recharge and pumping. During periods of increased recharge and reduced pumping, a significant portion of the model area exhibited a depth to the water table of less than 1 meter below the land surface. Conversely, during periods of decreased recharge and heightened pumping, much of the model area showed a depth to the water table ranging from 1 to 5 meters.

Alabama, Mississippi↗
USGS2025

Statistical approaches for modeling correlated grade and tonnage distributions and applications for mineral resource assessments

Correlations between grade and tonnage exist in mineral resource data compiled from published reports, but they are not always addressed during quantitative assessment of undiscovered mineral resources. Failure to account for correlated grade and tonnage distributions can result in geologically unrealistic assessment results. Current software tools simulate univariate ore tonnage and multivariate resource grades of undiscovered deposits independently. As a result, analysts are forced to rely on ad-hoc solutions to minimize the correlation issues by: 1) creating subsets of data with restricted criteria; 2) truncating grade and tonnage distributions; and 3) testing model robustness using exploratory data analysis. While these methods represent pragmatic solutions, the statistical solutions presented here provide additional options to address real correlations in grade and tonnage data used for mineral resource assessments. We present a modified version of the MapMark4 package in R that introduces two alternatives for modeling grade and tonnage distributions, consisting of a multivariate solution that accounts for correlations between ore tonnage and metal grades and an empirical solution that utilizes simple random sampling with replacement to reproduce coupled grades and tonnages from the input data. We present simulations for contained ore and metal for three case studies representing tungsten skarn, komatiite-hosted nickel, and sediment-hosted carbonate amagmatic zinc-lead (Mississippi Valley-type) deposits. Employing the methods presented here yields quantitative mineral resource assessment results that more closely reflect the empirical distributions of grades and tonnages observed in nature and expands the applicability of these tools for ongoing critical mineral resource assessments.

Applied Computing and Geosciences↗
USGS2024

Current status of the community sensor model standard for the generation of planetary digital terrain models

The creation of accurate elevation models (topography) from stereo images are critical for a large variety of geospatial activities, including the production of digital orthomosaics, change detection, landing site analysis, geologic mapping, rover traverse planning, and spectral analysis. The United Stated Geological Survey, Astrogeology Science Center, continues to transition the supported planetary sensor models to the Community Sensor Model (CSM) standard. This paper describes the current state of use for this photogrammetric standard, supported sensor model types, and qualitatively compares derived topography between SOCET SET and SOCET GXP ( ® BAE Systems) using HiRISE stereo images of Mars. Our transition to the CSM standard will ensure an uninterrupted capability to make these valuable products for Mars and many other extraterrestrial planets and moons.

Remote Sensing↗
USGS2024

Groundwater and surface-water interactions in the Lower Duwamish Waterway, Seattle, Washington

The U.S. Geological Survey (USGS), in cooperation with the Washington State Department of Ecology (Ecology), conducted a study to describe the current understanding of the regional groundwater system of the lower Duwamish River valley and groundwater and surface-water interactions in the lower Duwamish Waterway. The lower Duwamish Waterway is the final 5-mile (mi) reach of the Duwamish River before it empties into Elliott Bay in Puget Sound near Seattle, Washington. A nearshore site (hereinafter referred to as “Nearshore Site” to distinguish the particular site from general discussions of nearshore areas) along the western shoreline of the Duwamish River, about 1.5 mi upstream from the river mouth, was selected for focused groundwater data collection by USGS. Data loggers were deployed in seven groundwater wells and one stilling well in the Duwamish River to measure specific conductance, temperature, and depth at 15-minute intervals for a period of about 2 years. At the Nearshore Site during 2020–22, water levels in the shallow wells were 3–8 feet (ft) higher than water levels in the deep wells, providing evidence for a low-permeability layer between the shallow and deep aquifers in this area. The shallow wells had a pronounced seasonal variability, with high water levels in winter and low water levels in summer. Data from the deep wells showed far less seasonal variability, with slight increases in winter and a near-constant water level from spring to autumn. The deep wells had a strong hydraulic connection to the Duwamish River, as evidenced by the synchronous water-level variability during the tidal cycle, whereas the shallow wells had minimal to no tidal response. The potentiometric maps developed for the Nearshore Site and surrounding areas indicate large differences in groundwater-flow directions for the shallow and deep aquifers at low and high tides. For the shallow aquifer, flow is toward the lower Duwamish Waterway near the Nearshore Site, regardless of the tidal condition. For the deep aquifer, a potentiometric trough forms parallel to the shoreline during high tide, indicating that groundwater flow converges from the uplands to the west and the Duwamish River to the east. The geometry of the potentiometric surfaces between the nearshore-most well and the shoreline is complex and is further confounded by intermittent shoreline armoring and other buried infrastructure, which could serve as either a barrier or a conduit to flow. Groundwater and surface-water interactions in the lower Duwamish Waterway are inherently complex as a result of three overarching factors. First, water levels in the lower reaches of the Duwamish River vary daily by 11–16 ft because of tides from Puget Sound, which create large swings in the hydraulic gradient in the nearshore groundwater system. Second, the density and chemical composition of water in the Duwamish River change daily with the tides and seasonally, which constrains how river water entering the nearshore sediments interacts with discharging groundwater. Third, the nearshore subsurface and shoreline conditions are heterogenous because of extensive shoreline armoring over the past century, which governs the flow of groundwater and infiltrating river water. These unique features of groundwater and surface-water interactions in the lower Duwamish Waterway thus govern the transport of terrestrial contaminants to the lower Duwamish Waterway. Furthermore, the heterogenous aquifer properties in the lower Duwamish Waterway contribute to spatially and temporally dynamic contaminant-transport processes.

Washington↗
USGS2024

Upper crustal seismic velocity structure of the Hayward fault zone, San Francisco Bay, California, USA: Results from the 2016 East Bay Seismic Experiment (EBSI-16)

We developed Vp, Vs, Vp / Vs ratio, and Poisson’s ratio models of the uppermost crust (<4 km depth) from the eastern San Francisco (SF) Bay (California, USA) to near the Calaveras fault along a 15-km-long, linear profile. Upper crustal velocities are highly variable beneath, west, and well east of the Hayward fault. We observe eight notable features, from west to east: (1) Near San Francisco Bay, there is an ~2-km-wide structure with high Vp / Vs ratios (up to 5) and Poisson’s ratios (up to 0.48) extending from the surface to the base of our model, which we suggest the structure is a near-vertical fault that lies along a straight-line projection between the Silver Creek fault to the south and the Point Richmond fault to the north. The structure may be part of an ~90-km-long fault along the eastern SF Bay. (2) The western East Bay Plain, the lower lying area between the bay and the hills, includes up to 800 m of low-velocity sediments ( Vp ~1600–3000 m/s, Vs ~500 m/s to ~1000 m/s), underlain by higher velocity basement rocks ( Vp ~3000–5800 m/s; Vs ~1000–1500 m/s). (3) Between ~1 km and 3 km east of the Bay shoreline, sediments thin in a series of steps (likely faults) toward the Hayward fault. (4) Between ~3 km west and ~1 km east of the Hayward fault (at the East Chabot fault) at depths greater than 1 km, basement Vp (up to 6000 m/s) and Vs (up to 2800 m/s) are high, and Vp / Vs ratios (<2) and Poisson’s ratios (<0.3) are low, suggesting crystalline rocks. Furthermore, a near-vertical zone of low Vp / Vs ratios and Poisson’s ratios is between near-surface traces of the Hayward and East Chabot faults, likely corresponding to the San Leandro Gabbro of Ponce et al. (2003) . (5) Eastward of the East Chabot fault in the upper 1.5 km, basement Vp (~3000 m/s to ~4200 m/s) and Vs (~1200–2000 m/s) are lower than those west of the fault. (6) In the eastern Hayward/Oakland Hills, there are zones of laterally varying, high- and low-velocity ( Vp ~2500–3000 m/s) Jurassic–Cretaceous and Tertiary sediments in the shallow subsurface that likely extend much deeper than imaged. (7) Seismic energy that propagates westward from sources east of the Hayward fault (HF) appear weaker than energy that propagates eastward from sources west of the HF, suggesting that the HF acts as a partial barrier to shallow seismic energy propagation into the more populated eastern SF Bay area. (8) Unlike many fault zones, it appears that the active trace of the Hayward fault (in our study area) is not cored by a prominent, low-velocity zone relative to rocks to the east and west of the active trace. However, the active trace does mark a prominent change from relatively higher velocities to the west and lower velocities to the east.

California↗
USGS2026

Deep critical zone controls on shallow landslides

The deep critical zone (CZ) has long been recognized for its importance in influencing shallow landslides but was not considered feasible to include in slope stability models at the watershed scale. In this study, we demonstrate that simple approximations of the CZ in a fully coupled hydrologic and soil slope stability model can effectively capture the location, timing, and likely size of shallow landslides. To achieve this, we use coupled, process-based models that incorporate the effects of 1) deep CZ structures, 2) three-dimensional transient hydrology, and 3) multidimensional slope stability, calibrated with data from an intensively monitored field site. Our results show that the hydrologically active deep CZ guides groundwater flow, influencing where it drains from or exfiltrates to the soil mantle, producing distinct patterns of soil saturation and seepage forces at the soil-bedrock boundary. Deep conductive weathered critical zone drains the soil mantle, reducing the likelihood of destabilizing pore pressures, while the downslope thinning of the CZ forces groundwater to the surface. This creates localized instability and a tendency for similar-sized landslides across the landscape. In contrast, the absence of conductive weathered bedrock results in more widespread destabilizing pore pressures, leading to larger landslides and the likelihood of landslides earlier in a storm than in landscapes underlain by a deep CZ. Our findings suggest that first-order variations of deep CZ can provide physical explanations for variations observed in the susceptibility, magnitude, and timing of shallow landslides, and that CZ structure may be inferred from patterns and timing of landsliding.

Proceedings of the National Academy of Sciences↗
USGS2024

Iodine-129 in the eastern Snake River Plain aquifer at and near the Idaho National Laboratory, Idaho, 2021–22

Between the 1950s and 1980s, wastewater generated at the Idaho National Laboratory contained Iodine-129 ( 129 I); this wastewater was discharged directly into the eastern Snake River Plain (ESRP) aquifer through a deep disposal well, unlined infiltration ponds, or leaked from distribution systems below industrial facilities. During 2021–22, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy and the Idaho Department of Environmental Quality Idaho National Laboratory Oversight Program, collected groundwater samples from 64 monitoring wells in the ESRP aquifer, 6 of which are part of a multilevel monitoring system, to determine the concentration of 129 I in the groundwater. These samples were analyzed by accelerator mass spectrometry as part of a long-term ongoing study to track trends and occurrences of this carcinogenic, long-lived radionuclide in the environment. Concentrations ranged from slightly above the locally determined background concentration of 5.4×10 −6 picocuries per liter, to just below the U.S. Environmental Protection Agency’s maximum contaminant level of 1 picocurie per liter. Discharge of wastewater containing 129 I has been discontinued to the aquifer, and long-term trends from a subset (n=15) of sampled wells show decreasing 129 I concentrations over the last three decades. Concentrations of 129 I in groundwater from monitoring wells near facilities at the Idaho National Laboratory are affected by episodic recharge from an ephemeral surface-water source and by the fracture-flow dominated hydrologic regime in the ESRP aquifer. The spatially focused sampling effort has also identified a low-level 129 I plume that affects long-term water quality near and downgradient from the Advanced Test Reactor Complex in the southwestern part of the facility that had not been clearly defined in previous sampling efforts, although the definition of the plume is somewhat limited by available data.

Idaho↗
USGS2025

Bathymetric contour maps, surface area and capacity tables, and bathymetric change maps for selected water-supply lakes in Missouri, 2022–23

Bathymetric data were collected at 13 water-supply lakes around the periphery of Missouri by the U.S. Geological Survey in cooperation with the Missouri Department of Natural Resources and various local agencies, as part of a multiyear effort to establish or update the surface area and capacity tables for the surveyed lakes. Surveys were carried out during the months of April and May in 2022 and 2023. All but two of the lakes had been surveyed previously by the U.S. Geological Survey, and the recent surveys were compared to the earlier surveys to document the changes in the bathymetric surface and capacity of the lake. Bathymetric data were collected using a high-resolution multibeam mapping system mounted on a boat. Supplemental depth data at three of the lakes were collected in shallow areas with an acoustic Doppler current profiler on a remote-controlled boat. Data points from the various sources were exported at a gridded data resolution appropriate to each lake, either 0.82 foot, 1.64 feet, or 3.28 feet. Data outside the multibeam survey extent and greater than the surveyed water-surface elevation were obtained from data collected using aerial light detection and ranging (lidar) point cloud data. A linear enforcement technique was used to add points to the dataset in areas of sparse data (the upper ends of coves where the water was shallow or aquatic vegetation precluded data acquisition) based on surrounding multibeam and upland data values. The various point datasets were used to produce a three-dimensional triangulated irregular network surface of the lake-bottom elevations for each lake. A surface area and capacity table was produced from the three-dimensional surface for each lake showing surface area and capacity at specified lake water-surface elevations. Various quality-assurance tests were conducted to ensure quality data were collected with the multibeam, including beam angle checks and patch tests. Additional quality-assurance tests were conducted on the gridded bathymetric data from the survey, the bathymetric surface created from the gridded data, and the contours created from the bathymetric survey.

Missouri↗
USGS2024

Peak streamflow trends and their relation to changes in climate in Illinois, Iowa, Michigan, Minnesota, Missouri, Montana, North Dakota, South Dakota, and Wisconsin

Flood-frequency analysis, also called peak-flow frequency or flood-flow frequency analysis, is essential to water resources management applications including critical structure design and floodplain mapping. Federal guidelines for doing flood-frequency analyses are presented in a U.S. Geological Survey Techniques and Methods report known as Bulletin 17C. A basic assumption within Bulletin 17C is that for drainage basins without major hydrologic alterations, statistical properties of the distribution of annual peak streamflows (peak flows) are stationary; that is, the mean, variance, and skew are constant. The stationarity assumption has been widely accepted within the flood-frequency community; however, a better understanding of long-term climatic persistence and concerns about potential climate change and land-use change has caused a reexamination of the stationarity assumption. This work is part of that reexamination. The stationarity assumption is a concern because flood-frequency analyses that do not incorporate observed trends and abrupt changes may result in a poor representation of the true flood risk. Bulletin 17C does not offer guidance for incorporating nonstationarities when estimating floods, and it describes a need for studies that incorporate changing climate or basin characteristics. In response to this need and a history of concern regarding nonstationarity peak flows in the region, this study was done to assess potential nonstationarity in peak flows in the north-central United States. This report summarizes the methods used to detect hydroclimatic changes in peak-flow data in the study region. Four periods were selected for analysis of peak flow, daily streamflow, and climate data. The periods are (1) a 100-year period, 1921–2020; (2) a 75-year period, 1946–2020; (3) a 50-year period, 1971–2020; and (4) a 30-year period, 1991–2020. The starting point for these analyses was the initial data analysis of peak flow described in Bulletin 17C, which includes plotting the peak flow and checking for autocorrelation, monotonic trends, and changes points. Analyses were added to examine additional features in the data. Results are provided in a U.S. Geological Survey data release. The study limitations are documented for users of the results.

Scientific Investigations Report↗
USGS2026

Recycling radiogenic osmium by crustal foundering in subduction zones: Evidence from pyroxenite xenoliths in the north Andean arc

Removal of mafic-ultramafic lower crust (e.g., via delamination) is fundamental to making andesitic continental crust, yet direct evidence of this process remains elusive. A unique suite of garnet clinopyroxenite and hornblendite (arclogite) xenoliths from the northern volcanic zone of the Andes, erupted to the surface in the mid-Pleistocene, have bulk-rock geochemistry and osmium (Os) isotopic compositions that demonstrate their crustal affinity, yet have equilibration pressures and temperatures below the arc Mohorovičić discontinuity (~53 km) and some as deep as within the sub-arc mantle wedge (~105 km). Garnet websterites from the same xenolith suite, sourced from depths approaching the Wadati-Benioff zone (~140 km), have elemental and isotopic compositions indicative of a mantle origin, likely formed as products of peridotite-liquid reactions above the subducting slab. Variability in bulk-rock 143 Nd/ 144 Nd values and garnet oxygen isotope ratios ( 𝛿 18 O) for these samples is attributed to minor assimilation of subducted components and/or older crustal material, but assimilation alone cannot account for the highly radiogenic Os isotopic compositions. These results provide direct petrologic evidence for modern arclogite formation and foundering in the Andean orogen, the archetypal active continental subduction system. Elevated 187 Os/ 188 Os values of Mercaderes arclogites imply that recycling of gravitationally unstable arc cumulates during continental crust formation introduces highly radiogenic Os into the convective mantle, which has implications for mass fluxes across the crust-mantle boundary as well as the sources and evolution of mantle heterogeneity as seen in orogenic peridotite massifs and in the sources of oceanic basalts

Earth and Planetary Science Letters↗
USGS1999

Effects of snowmobile use on snowpack chemistry in Yellowstone National Park, 1998

Snowmobile use in Yellowstone National Park has increased substantially in the past three decades. In areas of greatest snowmobile use, elevated levels of by-products of gasoline combustion such as ammonium and benzene have been detected in snowpack samples. Annual snowpacks and snow-covered roadways trap deposition from local and regional atmospheric emissions. Snowpack samples representing most of the winter precipitation were collected at about the time of maximum annual snow accumulation at a variety of locations in the park to observe effects of a range of snowmobile traffic levels. Concentrations of organic and inorganic compounds in snow samples from pairs of sites located directly in and off snow-packed roadways used by snowmobiles were compared to concentrations in samples collected at nearby off-road sites. Concentrations of ammonium were 2 to 5 times higher for the in-road snow compared to off-road snow for each pair of sites. Thus, concentrations decreased rapidly with distance from roadways. In addition, concentrations of ammonium, nitrate, sulfate, benzene, and toluene in snow were positively correlated with snowmobile use.

Wyoming↗
USGS2026

Simulation of groundwater flow in the Silurian aquifer, eastern Iowa, 2020–45

The Silurian aquifer is an important water source for municipalities, industry, and rural households and communities in eastern Iowa, including Johnson County. Increasing demand for groundwater from the aquifer indicated that analytical tools may be beneficial to quantify groundwater resources and inform water-management decisions for the aquifer. The U.S. Geological Survey, in cooperation with the Johnson County Board of Supervisors, developed conceptual and numerical groundwater models to simulate water levels in the Silurian aquifer, determine groundwater budgets, and forecast changes in groundwater levels through 2045. A MODFLOW numerical model was constructed to match water levels for 2020 through 2022. Model performance was assessed by comparing simulated and observed water-level hydrographs at several pumping and monitoring wells. Hydrograph comparison indicates that the model simulates water levels accurately at monitoring wells that are not near areas of pumping and generally overpredicts water levels near pumping wells, while accurately simulating the drawdown trend over time at pumping wells. This transient model framework was then used to predict water levels through 2045 in a scenario of moderate drought and increased groundwater withdrawals. Results from the predictive model indicate as much as 13 meters of additional drawdown in 2045 from 2020 water levels in the area of pumping wells.

Iowa↗
USGS2025

Application of Hydrologic Simulation Program—FORTRAN (HSPF) as part of an integrated hydrologic model for the Salinas Valley, California

The U.S. Geological Survey (USGS), in cooperation with the Monterey County Water Resources Agency, conducted studies to help evaluate the surface-water and groundwater resources of the Salinas Valley study area, consisting of the entire Salinas River watershed and several smaller, adjacent coastal watersheds draining into Monterey Bay. The Salinas Valley study area is a highly productive agricultural region that depends on the coordinated use of surface water and groundwater to meet demand for irrigation and public water supply. To continue to meet these demands, a better understanding of the historical water balance and the effects of water-resource development on the long-term sustainability of water resources in the Salinas Valley study area is needed.

California↗
USGS2026

Streamflow, base-flow, and precipitation trends and simulated effects of groundwater withdrawals from the North Fork Red River aquifer on base flows upgradient from Lake Altus, western Oklahoma, 1980–2022

The U.S. Geological Survey, in cooperation with the Bureau of Reclamation, used five scenarios created from a previously published numerical groundwater-flow model (1980–2013) and historical streamflow records (1980–2022) to investigate the relation between groundwater withdrawals from the North Fork Red River aquifer and inflows to Lake Altus from the North Fork Red River in western Oklahoma. The five scenarios were (1) a scaled-equal-proportionate-share (EPS) groundwater-withdrawal scenario, (2) a study-area-scaled-reported groundwater-withdrawal scenario, (3) a zonal-scaled-reported groundwater-withdrawal scenario, (4) a historical drought-threshold scenario, and (5) a base-flow and evapotranspiration depletion scenario. For the scaled-EPS groundwater-withdrawal scenario, EPS groundwater withdrawals were often much higher than reported groundwater withdrawals and greatly decreased base flows for most scale factors. For the study-area-scaled-reported groundwater-withdrawal scenario, base flows were reduced more but by smaller percentages during wet periods than during dry periods when scaling simulated reported groundwater withdrawals. For the zonal-scaled-reported groundwater-withdrawal scenario, scaling simulated reported groundwater withdrawals within selected zones with more groundwater withdrawals did not always affect base flows more than scaling reported groundwater withdrawals within zones with less groundwater withdrawals. For the historical drought-threshold scenario, curtailing groundwater withdrawals at the drought thresholds increased annual base flows to Lake Altus by about 1,169 to 3,665 acre-feet. For the base-flow and evapotranspiration depletion scenario, the distance between a groundwater well and a stream was a major factor affecting base flow to the North Fork Red River when increasing groundwater withdrawals; however, spatially variable hydrologic properties and saturated-zone evapotranspiration could also affect the relation between base flows and groundwater withdrawals.

Oklahoma↗