USGS Science⌕ Search

SEARCH · USGS Science

Results for “New Mexico Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources

Cascadia Margin cold seeps: Subduction zone fluids, gas hydrates, and chemosynthetic habitats

Priority Geographic Area: The outer continental shelf and upper continental slope from Canada/U.S. border offshore Washington State to the Mendocino Fracture Zone (Northern California), entirely within the U.S. Exclusive Economic Zone (EEZ), from the outermost shelf to at least 2000 m water depth (Figure 1). Description of Priority Area: Since 2015, over a thousand water column gas plumes originating at seafloor gas seeps have been discovered landward of the Cascadia deformation front (e.g., Embley et al., 2016; Johnson et al., 2015, 2019; Merle and Embley, 2016; NA-95 Cruise Report, 2018; Riedel et al., 2018), adding to those that had long been known on Hydrate Ridge (e.g., Heeschen et al., 2003; Tréhu et al., 2004). The recently-discovered seeps stretch from offshore Vancouver Island to the Mendocino Fracture Zone and from the outer shelf to ~2000 m water depth, occurring both landward and seaward of the nominal limit for gas hydrate stability zone on the upper continental slope (Figure 1). Hundreds of seeps likely remain undiscovered. Water column imaging is incomplete both within the target geographic area and farther seaward, between the 2000 m isobath and the deformation front, which is the subject of an imaging study described in a white paper by Watt et al. The recently-discovered Cascadia Margin cold seeps partially overlap an important active margin gas hydrate province (Spence et al., 2001; Tréhu et al., 2003, 2004), as well as an area where sediments on the North American plate are folded and faulted and affected by fluids generated in the subduction complex beneath the Cascadia forearc (e.g., Saffer and Tobin, 2011). Several Ocean Drilling Program expeditions have focused on hydrate systems offshore Vancouver and Oregon (e.g., Riedel et al., 2009; Tréhu et al., 2004) and on the connection between the shallow and deep hydrogeologic systems. Cabled observatories now continuously monitor physical, chemical, and venting processes on south Hydrate Ridge (OOI; e.g., Philip et al., 2016a) and offshore Vancouver Island (NEPTUNE; e.g. Römer et al., 2016). Outside of these well-studied gas hydrate areas, a subset of the recently-discovered Cascadia seeps, including some that we visited with R/V Falkor in 2019 (e.g., https://schmidtocean.org/cruise/methane-seeps-at-edge-of-hydrate-stability/), also likely emit methane associated with shallow subseafloor gas hydrate systems. Other seeps are delivering not only methane, but also deep-derived gases (Baumberger et al., 2018, 2020) to the seafloor. Many Cascadia Margin seeps have also been recognized at water depths too shallow (e.g., 175 m) to be connected to gas hydrate dynamics. These seeps are postulated to be emitting gas and fluids that originated deep in accretionary wedge before migrating up normal faults generated during forearc extension associated with large earthquakes (Johnson et al., 2019). Only a small fraction of the recently discovered U.S. Cascadia Margin water column gas plumes has so far been verified by ROVs (Hercules from E/V Nautilus in 2016 and 2018; SuBastian from R/V Falkor in 2018 and 2019) to correspond to seafloor seeps. Careful scientific mapping, investigation, and sampling at the seeps have also been limited (e.g., Baumberger et al., 2018, 2020; Merle and Embley, 2016; Seabrook et al., 2018; Greinert et al. 2019). This white paper focuses on expanding exploration of already-identified U.S. Cascadia Margin cold seeps through a multipronged and multidisciplinary discovery program that could be accomplished with a variety of NOAA assets. The goals of the proposed exploration activities are to develop high-resolution maps of seep fields from deep ocean vehicles; to verify (and sample) seafloor gas emissions at the locations of water column plumes for compositional and isotopic studies; to map, sample, and conduct analyses on chemosynthetic communities and deep-sea coral habitats near seep sites to document species distributions and habitats as a function of depth and latitude along the margin; to collect seep geologic samples that can constrain the timing of methane emissions through geochronology; and to record environmental data (e.g., CTD) near the seafloor and in the water column above the seeps. Seafloor mapping using shipboard systems (multibeam/backscatter) would be needed to characterize seafloor features near seep sites. Water column imaging (EK60/80 and/or multibeam WCD data) conducted before and after seafloor explorations would capture active methane plumes and constrain temporal variations in seep emissions (e.g., Kannberg et al., 2013; Philip et al., 2016a, 2016b), which are known to vary on time scales as rapid as tidal cycles on this margin (e.g., Römer et al., 2016). What are the characterization and data needs in this area? Check all that apply: __x_ Biology, Geology, Physical Oceanography, Chemistry ___ Marine Archaeology ___ Other Provide a list or brief description of the data needed within this area, from your perspective: 1. Water column backscatter to image active gas plumes 2. High-resolution multibeam bathymetry, seafloor backscatter, and shallow sub-bottom imaging 3. Visual characterization and ground truthing of potential seeps, including high-resolution mapping and photography from near-seafloor vehicles; collection of seep-associated species, corals, sediments, authigenic carbonates, gases, and seawater Describe relevance to national security, conservation, and/or the economy: The Cascadia margin seeps provide significant ecosystem services, including habitat for commercially important fishes and support for diversity along the continental margin. Methane seeps are also biological hotspots for krill, plankton, and crustaceans, which in turn sustain higher trophic levels (e.g., whales). Methane-derived authigenic carbonates serve as a hard substrate for deep-sea corals and sponges on millennial time scales. The studies proposed here will elucidate the relationship among seep environments, deep-sea corals, sponges, fisheries, and other organisms and provide new insight into subduction zone and hydrate-associated fluids in this important seismogenic zone. The studies address fishery management concerns and inform future conservation of sensitive species (e.g., deep-sea corals) and benthic habitats. From your perspective, what makes this area unique? The Cascadia Margin seeps are a critical component of the leaky margin that stretches from Baja California to the Aleutian Arc along the Pacific coastline of North America. Cold seeps have been intensely studied on the Gulf of Mexico and U.S. Atlantic passive margins with a focus on chemosynthetic communities, deep-sea corals, and leakage of microbially-generated and/or thermogenic hydrocarbons; however, the recently-discovered Cascadia Margin seeps, as well as active margin seep systems in general, remain more poorly characterized. Such seeps not only contribute to the ocean carbon cycle (e.g., Pohlman et al., 2011), thereby fueling the base of the food chain in these settings, but also emit subduction zone fluids that provide clues about processes within the seismogenic zone and the accretionary complex. The Cascadia seeps area allows both biological (e.g., benthic habitats, coral distributions) and physical processes (e.g., generation of subduction zone fluids) to be studied along both depth (perpendicular to the deformation front) and latitudinal gradients.

California, Oregon, Washington↗

Origin of late Quaternary dune fields on the Southern High Plains of Texas and New Mexico

Mostly stabilized late Holocene eolian sands on the Southern High Plains of the United States were studied to determine their origins and to assess whether present dune stability depends more strongly on sediment supply, sediment availability, or transport limitations. Geomorphic, sedimentological, and geochemical trends indicate that late Holocene dunes formed under westerly paleowinds, broadly similar to those of today. Mineralogical and geochemical data indicate that the most likely source for the sands is not the Pecos River valley, but the Pleistocene Blackwater Draw Formation, an older, extensive eolian deposit in the region. These observations suggest that new sand is supplied whenever vegetation cover is diminished to the extent that the Blackwater Draw Formation can be eroded, in agreement with modern observations of wind erosion in the region. We conclude, therefore, that Southern High Plains dunes are stabilized primarily due to a vegetation cover. The dunes are thus sediment-availability limited. This conclusion is consistent with the observation that, in the warmest, driest part of the region (where vegetation cover is minimal), dunes are currently active over a large area. Geochemical data indicate that Southern High Plains dunes are the most mineralogically mature (quartz rich) sands yet studied in the Great Plains, which suggests a long history of eolian activity, either in the dune fields or during deposition of the Blackwater Draw Formation.

New Mexico, Texas↗

Trails through time: A geologist's guide to Jefferson County open space parks

Introduction Jefferson County straddles one of the most conspicuous and important geographic and geologic boundaries in western North America, the eastern flank of the Rocky Mountains. To the east you can travel 1,100 miles across Great Plains and Central Lowlands before you sight the western foothills of the Appalachians. If you travel in the other direction you will cross or skirt mountain range after mountain range until you sight the Coast Range near San Francisco, more than 900 miles to the west. Many of these mountains have different ages and origins than the Colorado mountains, but they are all part of the great mountain belt called the North American Cordillera that extends along the western edge of the continent from Alaska through Mexico. What is the reason for the remarkably straight and abrupt eastern flank of the Colorado Front Range? The brief answer is that it marks the edge of a block of ancient metamorphic and igneous rocks that has been uplifted relative to younger flat-laying sedimentary rocks that underlie the plains to the east. During the uplift, the sedimentary rocks along the boundary have been uplifted and tilted eastward to form the discontinuous line of hogback ridges that parallel the mountain front. Erosion during and after the uplift has removed the sedimentary rocks that once lay above the harder rocks of the mountain uplift, carved the scenic peaks and mountain canyons in the hard crystalline rocks of uplifted block, and worn away the softer layers of sedimentary rocks of the plains, but left a few of the harder upturned layers along the mountain front as hogback ridges. Jefferson County Open Space Parks, as well as other nearby parks and National Forest lands, offer marvelous opportunities to explore the geologic story behind this singular landscape. At first the distribution of rocks of different ages and types seems almost random, but careful study of the rocks and landscape features reveals a captivating geologic story, a history that tells of the building of the foundations of the continent, the rise and destruction of longvanished mountain ranges, the ebb and flow of ancient seas, and the constant shaping and reshaping of the landscape in response to the never-ending interplay between uplift and erosion. This historical account is constantly being improved and expanded as new evidence accumulates and new interpretations evolve.

Colorado↗

Oblique transfer of extensional strain between basins of the middle Rio Grande rift, New Mexico: Fault kinematic and paleostress constraints

The structural geometry of transfer and accommodation zones that relay strain between extensional domains in rifted crust has been addressed in many studies over the past 30 years. However, details of the kinematics of deformation and related stress changes within these zones have received relatively little attention. In this study we conduct the first-ever systematic, multi-basin fault-slip measurement campaign within the late Cenozoic Rio Grande rift of northern New Mexico to address the mechanisms and causes of extensional strain transfer associated with a broad accommodation zone. Numerous (562) kinematic measurements were collected at fault exposures within and adjacent to the NE-trending Santo Domingo Basin accommodation zone, or relay, which structurally links the N-trending, right-stepping en echelon Albuquerque and Española rift basins. The following observations are made based on these fault measurements and paleostresses computed from them. (1) Compared to the typical northerly striking normal to normal-oblique faults in the rift basins to the north and south, normal-oblique faults are broadly distributed within two merging, NE-trending zones on the northwest and southeast sides of the Santo Domingo Basin. (2) Faults in these zones have greater dispersion of rake values and fault strikes, greater dextral strike-slip components over a wide northerly strike range, and small to moderate clockwise deflections of their tips. (3) Relative-age relations among fault surfaces and slickenlines used to compute reduced stress tensors suggest that far-field, ~E-W–trending σ 3 stress trajectories were perturbed 45° to 90° clockwise into NW to N trends within the Santo Domingo zones. (4) Fault-stratigraphic age relations constrain the stress perturbations to the later stages of rifting, possibly as late as 2.7–1.1 Ma. Our fault observations and previous paleomagnetic evidence of post–2.7 Ma counterclockwise vertical-axis rotations are consistent with increased bulk sinistral-normal oblique shear along the Santo Domingo rift segment in Pliocene and later time. Regional geologic evidence suggests that the width of active rift faulting became increasingly confined to the Santo Domingo Basin and axial parts of the adjoining basins beginning in the late Miocene. We infer that the Santo Domingo clockwise stress perturbations developed coevally with the oblique rift segment mainly due to mechanical interactions of large faults propagating toward each other from the adjoining basins as the rift narrowed. Our results suggest that negligible bulk strike-slip displacement has been accommodated along the north-trending rift during much of its development, but uncertainties in the maximum ages of fault slip do not allow us to fully evaluate and discriminate between earlier models that invoked northward or southward rotation and translation of the Colorado Plateau during early (Miocene) rifting.

New Mexico↗

Rocky Mountain Tertiary coal-basin models and their applicability to some world basins

Tertiary intermontane basins in the Rocky Mountain region of the United States contain large amounts of coal resources. The first major type of Tertiary coal basin is closed and lake-dominated, either mud-rich (e.g., North Park Basin, Colorado) or mud plus carbonate (e.g., Medicine Lodge Basin, Montana), which are both infilled by deltas. The second major type of Tertiary coal basin is open and characterized by a preponderance of sediments that were deposited by flow-through fluvial systems (e.g., Raton Basin, Colorado and New Mexico, and Powder River Basin, Wyoming and Montana). The setting for the formation of these coals varies with the type of basin sedimentation, paleotectonism, and paleoclimate. The mud-rich lake-dominated closed basin (transpressional paleotectonism and warm, humid paleoclimate), where infilled by sandy “Gilbert-type” deltas, contains thick coals (low ash and low sulfur) formed in swamps of the prograding fluvial systems. The mud- and carbonate-rich lake-dominated closed basin is infilled by carbonate precipitates plus coarse-grained fan deltas and fine-grained deltas. Here, thin coals (high ash and high sulfur) formed in swamps of the fine-grained deltas. The coarse-clastic, open basins (compressional paleotectonism and warm, paratropical paleoclimate) associated with flow-through fluvial systems contain moderately to anomalously thick coals (high to low ash and low sulfur) formed in swamps developed in intermittently abandoned portions of the fluvial systems. These coal development patterns from the Tertiary Rocky Mountain basins, although occurring in completely different paleotectonic settings, are similar to that found in the Tertiary, Cretaceous, and Permian intermontane coal basins in China, New Zealand, and India.

International Journal of Coal Geology↗

Geomorphic processes responsible for decadal-scale arroyo changes, Rio Puerco, New Mexico

The channel and arroyo of the Rio Puerco have continued to evolve since incision in the late 1800s. Resurveys of channel cross sections and aerial imagery over time indicate that between the 1970s and 1990s, the upstream reaches (type 1 morphology) of the Rio Puerco have continued to undergo construction of an incipient inner floodplain by means of vertical aggradation while simultaneously developing a narrower, but relatively shallow, channel. Downstream reaches (type 2 morphology) also show progressive channel width decrease, construction of a well-vegetated and mature inner floodplain, and deposition in the active channel, leading to an increase in the streambed elevation. Trends in rainfall and streamflow cannot explain the observed decadal patterns in sediment deposition in the Rio Puerco. Analysis of streamflow shows that a large percentage of runoff originating in the upper watershed is entirely infiltrated into the streambed and floodplains between upstream and downstream reaches. With suspended-sediment concentrations reaching 500,000 mg/L, the loss of streamflow results in sediment deposition. Peak streamflows are decreasing in the Rio Puerco near its mouth at Bernardo, New Mexico. Hydrographs were modeled using a 71-yr-old monumented channel cross section in the lower reaches (Highway 6) surveyed in 1936 and resurveyed in 2007. Model outputs show that attenuation of peak flow can occur from progressive changes in channel morphology and vegetation. Decreasing peak flows, transmission losses, and development of an inner floodplain within the widened arroyo all interact to increase sediment deposition over time. Consequently, increased sediment deposition has resulted in decreased sediment loads and sediment concentrations in downstream reaches. Resurveys of channels in downstream reaches confirm that the channel bed is aggrading. At the oldest surveyed cross section (Highway 6 surveyed in 1936 and resurveyed in 2007), the channel bed has aggraded 6 m, and at its long-term rate of filling, deposition of sediment could fill the entire arroyo cross section in 150 yr. The Rio Puerco has incised and aggraded several times in the late Quaternary. Results of this study show that the twentieth-century aggradation of the Rio Puerco is driven by intrinsic processes that involve a positive feedback relation among channel morphology, vegetation, climate, streamflow, infiltration, and sediment loads.

New Mexico↗

A new towed platform for the unobtrusive surveying of benthic habitats and organisms

Maps of coral ecosystems are needed to support many conservation and management objectives, as well as research activities. Examples include ground-truthing aerial and satellite imagery, characterizing essential habitat, assessing changes, and monitoring the progress of restoration efforts. To address some of these needs, the U.S. Geological Survey developed the Along-Track Reef-Imaging System (ATRIS), a boat-based sensor package for mapping shallow-water benthic environments. ATRIS consists of a digital still camera, a video camera, and an acoustic depth sounder affixed to a moveable pole. This design, however, restricts its deployment to clear waters less than 10 m deep. To overcome this limitation, a towed version has been developed, referred to as Deep ATRIS. The system is based on a light-weight, computer-controlled, towed vehicle that is capable of following a programmed diving profile. The vehicle is 1.3 m long with a 63-cm wing span and can carry a wide variety of research instruments, including CTDs, fluorometers, transmissometers, and cameras. Deep ATRIS is currently equipped with a high-speed (20 frames · s-1) digital camera, custom-built light-emitting-diode lights, a compass, a 3-axis orientation sensor, and a nadir-looking altimeter. The vehicle dynamically adjusts its altitude to maintain a fixed height above the seafloor. The camera has a 29° x 22° field-of-view and captures color images that are 1360 x 1024 pixels in size. GPS coordinates are recorded for each image. A gigabit ethernet connection enables the images to be displayed and archived in real time on the surface computer. Deep ATRIS has a maximum tow speed of 2.6 m · s-1and a theoretical operating tow-depth limit of 27 m. With an improved tow cable, the operating depth can be extended to 90 m. Here, we present results from the initial sea trials in the Gulf of Mexico and Biscayne National Park, Florida, USA, and discuss the utility of Deep ATRIS for map-ping coral reef habitats. Several example mosaics illustrate the high-quality imagery that can be obtained with this system. The images also reveal the potential for unobtrusive animal observations; fish and sea turtles are unperturbed by the presence of Deep ATRIS

Florida↗

Some Middle Eocene, Lower Eocene, and Paleocene foraminiferal faunas from west Florida

This discussion of the lithology and microfauna of the clastic facies of the Ecocene and Paleocene rocks of Florida is based mainly on data obtained from the study of many cores taken in the Oil City corporation Walton Land and Timber Co. well 1, Walton County, Fla. Although the fauna of the middle Eocene rocks in western Florida is composed mainly of species that have been reported from rocks of equivalent age in the western Gulf Coast, its distinctive species, and poor representation of a few species that are diagnostic in the western area. The assemblages of small Foraminifera in the lower Eocene rocks are composed, mainly, of specimens of species that have been described from outcrops of the Wilcox Group in Alabama. The microfauna of the clastic facies of the Paleocene in western Florida is informally called the "Tamesi' Fauna" in this report. This Fauna is particularly important because it contains abundant Glorotalia velasconesis , a diagnostic species of the Velasco (Paleocene) Formation of Mexico, is also diagnostic of the "Tamesi fauna." On the basis of the environmental preference of Recent analogous pelagic forms, the preferential environment of the containing sediments, it is inferred that the "Tamesi fauna" developed in a subtropical, open sea environment. The Effect of the temperature, salinity, bathymetry, and associated factors on the distribution of Recent pelagic species of Foraminifera has been discussed by several authors. Similar controls were probably effective during Paleocene time. The presence of certain species of pelagic Foraminifera in one Paleocene unit, and their absences in another, is therefore not necessarily an index to the relative position of the units in the vertical time sequence. The stratigraphic distribution of the benthonic species of the "Tamesi Fauna" in western Florida is usually accord with their stratigraphic distribution in the Paleocene beds in other parts of the Gulf coast. Consequently, on the basis of the foregoing enviromental and distributive data, it is suggested that the "Tamesi Fauna" of the clasttic lithofacies of the Paleocene in western Florida respresents an interval of geologic time that is equivalent to the represented by the Clayton, Porters Creek, and Naheola formations of Alqabama and Correlative stratigraphic units in other parts of the Gulf region. It is believed that the outer neritic Paleocene sediments of west Florida grade northward into the inner-neritic Paleocene sediments that crop out in Alabama. Fifty seven species of Foraminifera that are characteristic of the cored Paleocene section in the Walton well, and recorded from 37 other wells distributed across northwestern Florida and southern Georgia, are discussed and figured. Two species are describes as new: Epoides libertyensis and Cibicides libertyensis.

Florida↗

Regional quaternary submarine geomorphology in the Florida Keys

High-quality seismic reflection profiles fill a major gap in geophysical data along the south Florida shelf, allowing updated interpretations of the history of the Quaternary coral reef system. Incorporation of the new and existing data sets provides the basis for detailed color maps of the Pleistocene surface and thickness of overlying Holocene accretions. The maps cover the Florida Keys to a margin-wide upper-slope terrace (30 to 40 m deep) and extend from The Elbow Reef (north Key Largo) to Rebecca Shoal (Gulf of Mexico). The data indicate that Pleistocene bedrock is several meters deeper to the southwest than to the northeast, yet in general, Holocene sediments are ~3 to 4 m thick shelf-wide. The Pleistocene map demonstrates the significance of a westward-dipping bedrock surface to Holocene flooding history and coral reef evolution. Seismic facies show evidence for two possible Holocene stillstands. Aerial photographs provide information on the seabed surface, much of which is below seismic resolution. The photographs define a prominent, regional nearshore rock ledge that extends ~2.5 km seaward from the keys' shoreline. They show that bands of rock ridges exist along the outer shelf and on the upper-slope terrace. The photographs also reveal four tracts of outlier reefs on the terrace, one more than had been documented seismically. Seismic and photographic data indicate the tracts are >200 km long, nearly four times longer than previously thought. New interpretations provide insights into a youngest possible terrace age (ca. 175 ka?) and the likelihood that precise ages of oxygen isotope substage 5e ooid tidal-bar and coral reef components may differ. The tidal-bar/reef complex forms the Florida Keys.

Geological Society of America Bulletin↗

Environment of ore deposition at the Mex-Tex deposits, Hansonburg District, New Mexico, from studies of fluid inclusions

These deposits , in Pennsylvanian limestone and shale, contain barite, fluorite, low-silver galena with "J-type" lead, and quartz, and only minor amounts of other minerals. Mineralization occurs in veins, in blankets of bedded, rhythmically banded "coontail" ore , and in vuggy, coarsely crystalline open-space fillings in tectonic and solution channels in limestone adjacent to faults. Except for widespread silicification, the mineralization is very similar to that of the southern Illinois deposits . The main stages of hypogene mineralization are: 1) sphalerite, pyrite, galena and chalcopyrite; 2) five easily recognizable substages of fluorite with intermittent quartz and barite; and 3) late calcite.More than 500 primary and 2,500 pseudosecondary inclusions , mainly from fluorite, were studied on the freezing and heating microscope stages. Some primary inclusions contain organic matter. Gross supercooling indicates slow ore - fluid movement. Recognizable planes of pseudo-secondaries (each containing 20-200 inclusions ) yield data essentially identical with coeval primaries, but the few planes of presumed secondaries do not.The first three substages of fluorite formed from fluids that were essentially constant in temperature at 186°-205° C (assumed pressure correction +10° C), but increased in salinity from aproximately 10 up to 15 weight percent salts. Succeeding substages formed at gradually decreasing temperatures (to about 140° C) and increasing salinity (maximum 17%), with breaks marking several individual substages. A few inclusions in an early barite have anomalously low homogenization temperatures. Coarse selenite has primary inclusions full of fresh water and hence is presumed to be supergene.These data do not prove any given theory or origin for the fluids or the deposits , but they do place some limits on possible mechanisms of origin.

New Mexico↗

Lithofacies of the salt wash member of the Morrison Formation, Colorado plateau

The Salt Wash is the basal member of the Upper Jurassic Morrison Formation in parts of Utah, Colorado, Arizona, and New Mexico. Deposited by streams, it comprises lenticular beds of cross-laminated sandstone irregularly interbedded with mudstone, siltstone, claystone, and horizontally laminated sandstone. The term "lithofacies," as used in this paper, denotes lithologic aspect. The specific lithofacies of the Salt Wash member at a given locality is determined by the thickness, proportion, and continuity of the stream and flood-plain deposits that make up the Salt Wash. Stream deposits include all rocks interpreted as deposited from moving water; flood-plain deposits include all rocks interpreted as deposited from slack water. Regional differences in lithofacies show that the Salt Wash member is a fan-shaped wedge of sedimentary rocks whose apex is in south-central Utah. Within the wedge, the thickness of the Salt Wash and the thickness, proportion, and continuity of the contained stream deposits decrease relatively uniformly to the north, northeast, and southeast of the apex. Interpretation of the regional differences in lithofacies indicates deposition by a distributary stream system whose apex was in south-central Utah and which spread sediments to the north, east, and southeast over a nearly flat plain. Irregularities on this plain near the Four Corners area and in west-central Colorado modified the distributary system, and therefore the wedge is not symmetrical. Most uranium-vanadium ore deposits in the Salt Wash member occur in a lithofacies near the center of the wedge. This may be a genetic relation and can be explained as a function of transmissibility of the particular lithofacies. The ore deposits, however, are concentrated in a relatively small part of the central lithofacies. Because local geologic features such as structure or igneous intrusions might control the localization of ore deposits in the small area, the high degree of correlation of ore deposits and a certain lithofacies may be coincidental. © 1957, The Geological Society of America, Inc.

Colorado↗

Environmental data associated with sites infected with white-nose syndrome (WNS) before October 2011 in North America

White-nose syndrome (WNS) is an emerging infectious disease of hibernating bats caused by a fungus previously known as Geomyces destructans and reclassified as Pseudogymnoascus destructans . The disease was first documented in 2006 in New York, has since spread across much of eastern North America, and as of January 2012, had caused the death of at least 5.7 to 6.7 million bats. Previous studies have suggested that environmental conditions play a strong role in WNS mortality. However, to predict where and when the disease will spread to new sites is difficult because detailed site information and associated environmental data are notably sparse. This paper presents a chronology of where and when WNS was detected in North America before October 2011 and indicates who reported the infections. This paper also presents available data on WNS-infected site elevation, geology, sediment chemistry and biota, air temperature, and relative humidity. By the end of September 2011, at least 241 known WNS-infected sites were in North America and the number of infected sites per winter season had increased each year since 2006. The progressive increase in the number of infected sites per winter season suggests that the number of WNS infections had not peaked as of the 2010–11 winter season. WNS-infected sites include caves and mines, but the sites are not restricted by elevation, lithology, or strata age. Available data on site sediment chemistry are sparse but present a wide range of values, suggesting that caves and mines may contain a great range of microenvironments that are still poorly understood. The distribution of WNS may be restricted by air temperature and relative humidity. Published air temperature values from WNS-infected sites range from −15 to 33 degrees Celsius (but most temperature values are less than 20 degrees Celsius), and relative humidity values range from 50 to 100 percent. The spread of WNS may be restricted by a cave or mine temperature threshold of 20 degrees Celsius (which is likely to be south of most of the continental United States) and by some yet to be determined threshold of low relative humidity. These results indicate that WNS may not spread south into Mexico or to Puerto Rico.

Connecticut, Delaware, Indiana, Kentucky, Maine, M↗

Seismic‐hazard forecast for 2016 including induced and natural earthquakes in the central and eastern United States

The U.S. Geological Survey (USGS) has produced a one‐year (2016) probabilistic seismic‐hazard assessment for the central and eastern United States (CEUS) that includes contributions from both induced and natural earthquakes that are constructed with probabilistic methods using alternative data and inputs. This hazard assessment builds on our 2016 final model ( Petersen et al. , 2016 ) by adding sensitivity studies, illustrating hazard in new ways, incorporating new population data, and discussing potential improvements. The model considers short‐term seismic activity rates (primarily 2014–2015) and assumes that the activity rates will remain stationary over short time intervals. The final model considers different ways of categorizing induced and natural earthquakes by incorporating two equally weighted earthquake rate submodels that are composed of alternative earthquake inputs for catalog duration, smoothing parameters, maximum magnitudes, and ground‐motion models. These alternatives represent uncertainties on how we calculate earthquake occurrence and the diversity of opinion within the science community. In this article, we also test sensitivity to the minimum moment magnitude between M 4 and M 4.7 and the choice of applying a declustered catalog with b =1.0 rather than the full catalog with b =1.3. We incorporate two earthquake rate submodels: in the informed submodel we classify earthquakes as induced or natural, and in the adaptive submodel we do not differentiate. The alternative submodel hazard maps both depict high hazard and these are combined in the final model. Results depict several ground‐shaking measures as well as intensity and include maps showing a high‐hazard level (1% probability of exceedance in 1 year or greater). Ground motions reach 0.6 g horizontal peak ground acceleration (PGA) in north‐central Oklahoma and southern Kansas, and about 0.2 g PGA in the Raton basin of Colorado and New Mexico, in central Arkansas, and in north‐central Texas near Dallas–Fort Worth. The chance of having levels of ground motions corresponding to modified Mercalli intensity (MMI) VI or greater earthquake shaking is 2%–12% per year in north‐central Oklahoma and southern Kansas and New Madrid similar to the chance of damage at sites in high‐hazard portions of California caused by natural earthquakes. Hazard is also significant in the Raton basin of Colorado/New Mexico; north‐central Arkansas; Dallas–Fort Worth, Texas; and in a few other areas. Hazard probabilities are much lower (by about half or more) for exceeding MMI VII or VIII. Hazard is 3‐ to 10‐fold higher near some areas of active‐induced earthquakes than in the 2014 USGS National Seismic Hazard Model (NSHM), which did not consider induced earthquakes. This study in conjunction with the LandScan TM Database (2013) indicates that about 8 million people live in areas of active injection wells that have a greater than 1% chance of experiencing damaging ground shaking (MMI≥VI) in 2016. The final model has high uncertainty, and engineers, regulators, and industry should use these assessments cautiously to make informed decisions on mitigating the potential effects of induced and natural earthquakes.

Seismological Research Letters↗

Geological, geochemical, and geophysical studies by the U.S. Geological Survey in Big Bend National Park, Texas

Big Bend National Park (BBNP), Tex., covers 801,163 acres (3,242 km 2 ) and was established in 1944 through a transfer of land from the State of Texas to the United States. The park is located along a 118-mile (190-km) stretch of the Rio Grande at the United States-Mexico border. The park is in the Chihuahuan Desert, an ecosystem with high mountain ranges and basin environments containing a wide variety of native plants and animals, including more than 1,200 species of plants, more than 450 species of birds, 56 species of reptiles, and 75 species of mammals. In addition, the geology of BBNP, which varies widely from high mountains to broad open lowland basins, also enhances the beauty of the park. For example, the park contains the Chisos Mountains, which are dominantly composed of thick outcrops of Tertiary extrusive and intrusive igneous rocks that reach an altitude of 7,832 ft (2,387 m) and are considered the southernmost mountain range in the United States. Geologic features in BBNP provide opportunities to study the formation of mineral deposits and their environmental effects; the origin and formation of sedimentary and igneous rocks; Paleozoic, Mesozoic, and Cenozoic fossils; and surface and ground water resources. Mineral deposits in and around BBNP contain commodities such as mercury (Hg), uranium (U), and fluorine (F), but of these, the only significant mining has been for Hg. Because of the biological and geological diversity of BBNP, more than 350,000 tourists visit the park each year. The U.S. Geological Survey (USGS) has been investigating a number of broad and diverse geologic, geochemical, and geophysical topics in BBNP to provide fundamental information needed by the National Park Service (NPS) to address resource management goals in this park. Scientists from the USGS Mineral Resources and National Cooperative Geologic Mapping Programs have been working cooperatively with the NPS and several universities on several research studies within BBNP. Because the last geologic map of the entire BBNP was published in the 1960s, one of the primary goals of the USGS is to provide a new geologic map of BBNP at a scale 1:100,000; this work is ongoing among the USGS, NPS, the Texas Bureau of Economic Geology, and university scientists. This USGS Circular summarizes eight studies funded and primarily carried out by the USGS, but it is not intended to be a comprehensive reference of work conducted in BBNP. This Circular describes topical research of the recently completed interdisciplinary USGS project, which has provided information leading to a more complete understanding of the following topics in BBNP: Tectonic and geologic history (Chapters 1, 2, and 3), Age and formation processes of a skarn mineral deposit (Chapter 4), Geoenvironmental effects of abandoned mercury mines (Chapter 5), Age, source, and geochemistry of surface and subsurface water resources (Chapter 6), Isotopic tracing of food sources of bears (Chapter 7), and Geophysical characteristics of surface and subsurface geology (Chapter 8). Additional information and the geochemical and geophysical data of the USGS studies in BBNP are available on line at http://minerals.cr.usgs.gov/projects/big_bend/index.html.

Texas↗

Seismic velocities within the sedimentary succession of the Canada Basin and southern Alpha-Mendeleev Ridge, Arctic Ocean: evidence for accelerated porosity reduction?

The Canada Basin and the southern Alpha-Mendeleev ridge complex underlie a significant proportion of the Arctic Ocean, but the geology of this undrilled and mostly ice-covered frontier is poorly known. New information is encoded in seismic wide-angle reflections and refractions recorded with expendable sonobuoys between 2007 and 2011. Velocity–depth samples within the sedimentary succession are extracted from published analyses for 142 of these records obtained at irregularly spaced stations across an area of 1.9E + 06 km 2 . The samples are modelled at regional, subregional and station-specific scales using an exponential function of inverse velocity versus depth with regionally representative parameters determined through numerical regression. With this approach, smooth, non-oscillatory velocity–depth profiles can be generated for any desired location in the study area, even where the measurement density is low. Practical application is demonstrated with a map of sedimentary thickness, derived from seismic reflection horizons interpreted in the time domain and depth converted using the velocity–depth profiles for each seismic trace. A thickness of 12–13 km is present beneath both the upper Mackenzie fan and the middle slope off of Alaska, but the sedimentary prism thins more gradually outboard of the latter region. Mapping of the observed-to-predicted velocities reveals coherent geospatial trends associated with five subregions: the Mackenzie fan; the continental slopes beyond the Mackenzie fan; the abyssal plain; the southwestern Canada Basin; and, the Alpha-Mendeleev magnetic domain. Comparison of the subregional velocity–depth models with published borehole data, and interpretation of the station-specific best-fitting model parameters, suggests that sandstone is not a predominant lithology in any of the five subregions. However, the bulk sand-to-shale ratio likely increases towards the Mackenzie fan, and the model for this subregion compares favourably with borehole data for Miocene turbidites in the eastern Gulf of Mexico. The station-specific results also indicate that Quaternary sediments coarsen towards the Beaufort-Mackenzie and Banks Island margins in a manner that is consistent with the variable history of Laurentide Ice Sheet advance documented for these margins. Lithological factors do not fully account for the elevated velocity–depth trends that are associated with the southwestern Canada Basin and the Alpha-Mendeleev magnetic domain. Accelerated porosity reduction due to elevated palaeo-heat flow is inferred for these regions, which may be related to the underlying crustal types or possibly volcanic intrusion of the sedimentary succession. Beyond exploring the variation of an important physical property in the Arctic Ocean basin, this study provides comparative reference for global studies of seismic velocity, burial history, sedimentary compaction, seismic inversion and overpressure prediction, particularly in mudrock-dominated successions.

Geophysical Journal International↗

The Taylor Creek Rhyolite of New Mexico: a rapidly emplaced field of lava domes and flows

The Tertiary Taylor Creek Rhyolite of southwest New Mexico comprises at least 20 lava domes and flows. Each of the lavas was erupted from its own vent, and the vents are distributed throughout a 20 km by 50 km area. The volume of the rhyolite and genetically associated pyroclastic deposits is at least 100 km3 (denserock equivalent). The rhyolite contains 15%-35% quartz, sanidine, plagioclase, ??biotite, ??hornblende phenocrysts. Quartz and sanidine account for about 98% of the phenocrysts and are present in roughly equal amounts. With rare exceptions, the groundmass consists of intergrowths of fine-grained silica and alkali feldspar. Whole-rock major-element composition varies little, and the rhyolite is metaluminous to weakly peraluminous; mean SiO2 content is about 77.5??0.3%. Similarly, major-element compositions of the two feldsparphenocryst species also are nearly constant. However, whole-rock concentrations of some trace-elements vary as much as several hundred percent. Initial radiometric age determinations, all K-Ar and fission track, suggest that the rhyolite lava field grew during a period of at least 2 m.y. Subsequent 40Ar/39Ar ages indicate that the period of growth was no more than 100 000 years. The time-space-composition relations thus suggest that the Taylor Creek Rhyolite was erupted from a single magma reservoir whose average width was at least 30 km, comparable in size to several penecontemporaneous nearby calderas. However, this rhyolite apparently is not related to a caldera structure. Possibly, the Taylor Creek Phyolite magma body never became sufficiently volatile rich to produce a large-volume pyroclastic eruption and associated caldera collapse, but instead leaked repeatedly to feed many relatively small domes and flows. The new 40Ar/39Ar ages do not resolve preexisting unknown relative-age relations among the domes and flows of the lava field. Nonetheless, the indicated geologically brief period during which Taylor Creek Rhyolite magma was erupted imposes useful constraints for future evaluation of possible models for petrogenesis and the origin of trace-element characteristics of the system. ?? 1990 Springer-Verlag.

Bulletin of Volcanology↗

A photographic and acoustic transect across two deep-water seafloor mounds, Mississippi Canyon, northern Gulf of Mexico

In the northern Gulf of Mexico, a series of seafloor mounds lie along the floor of the Mississippi Canyon in Atwater Valley lease blocks 13 and 14. The mounds, one of which was drilled by the Chevron Joint Industry Project on Methane Hydrates in 2005, are interpreted to be vent-related features that may contain significant accumulations of gas hydrate adjacent to gas and fluid migration pathways. The mounds are located ???150 km south of Louisiana at ???1300 m water depth. New side-scan sonar data, multibeam bathymetry, and near-bottom photography along a 4 km northwest-southeast transect crossing two of the mounds (labeled D and F) reveal the mounds' detailed morphology and surficial characteristics. Mound D, ???250 m in diameter and 7-10 m in height, has exposures of authigenic carbonates and appears to result from a seafloor vent of slow-to-moderate flux. Mound F, which is ???400 m in diameter and 10-15 m high, is covered on its southwest flank by extruded mud flows, a characteristic associated with moderate-to-rapid flux. Chemosynthetic communities visible on the bottom photographs are restricted to bacterial mats on both mounds and mussels at Mound D. No indications of surficial gas hydrates are evident on the bottom photographs.

Marine and Petroleum Geology↗

Middle tertiary volcanic field in the southern Rocky Mountains

A widespread volcanic field covered most of the Southern Rocky Mountains in middle Tertiary time, 40 to 25 m.y. ago (approximately Oligocene time). This field covered an erosion surface that beveled structures formed during the Laramide orogeny in Late Cretaceous and early Tertiary time. The source vents from which the volcanic rocks were derived were largely restricted to the deformed area. Recognized volcanic centers lie mostly within a broad triangular area bounded on the east by the Rocky Mountain front, on the northwest by the northeast-trending Colorado mineral belt lineament, and on the southwest by the southern margin of the recurrently active Uncompahgre-San Luis uplift. Local volcanic centers existed also in the Never Summer Mountains and Rabbit Ears Range north of the mineral belt lineament. The resulting volcanic field thus consisted of a major southern segment covering all of south-central Colorado and adjacent New Mexico and a northern segment extending into the mountain areas of north-central Colorado. The two segments were linked along the trend of the Colorado mineral belt. Most of the volcanic field consisted of volcanic rock of intermediate composition derived from many widely scattered volcanoes. Extensive aprons of volcaniclastic rocks around these volcanoes coalesced to provide a virtually continuous cover of volcanic material. In places, the volcanic activity became more silicic with time, great ash-flow tuff sheets were erupted, and the source areas subsided to form calderas. The largest ash-flow field and most of the calderas formed in the San Juan Mountains. Other ash flows apparently were derived from areas in the Sawatch Range in central Colorado and the Never Summer Mountains in northern Colorado. Large near-surface batholiths were emplaced beneath the San Juan Mountains and beneath the region that extends northeastward from the Elk Mountains and Sawatch Range along the trend of the Colorado mineral belt as far as the Rocky Mountain front. These batholiths are manifested by two large gravity lows and by many exposed epizonal plutons that represent cupolas on the larger underlying bodies. The batholith in central Colorado probably consists of plutons of both Laramide (70 to 55 m.y.) and middle Tertiary (40 to 25 m.y.) ages.

Rocky Mountains↗