SEARCH · USGS Science

Results for “Limnology and Oceanography”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,656 records · Page 68Linked to original sources

USGS2024

Global geologic map of Europa

Discovered by Galileo Galilei more than 400 years ago and imaged in detail by the Voyager 2 Galileo spacecraft, Jupiter’s icy moon Europa has been a source of intrigue. A range of science investigations indicate that it contains the key ingredients for habitability, notably energy, chemistry, and liquid water. Europa’s surface is geologically complex and, based on the dearth of impact craters, interpreted to be as young as ~60 Ma. The array of geologic features that characterize the surface include extensive ridged plains, regions of broad disruption termed chaotic terrain, long, quasi-linear ridges that span thousands of kilometers, and bands as much as 60 kilometers wide and that extend 100s of kilometers. These features, along with other geophysical measurements, indicate the presence of a global briny liquid water ocean beneath the ice shell. It was not until the arrival of the Galileo spacecraft in 1995 that the true nature and level of complexity of the surface was revealed. Although image data returned by Galileo provided insight into the structure of a variety of regions, the entire satellite has yet to be observed at a regional scale (less than 250 meters per pixel) and the detailed geologic nature of much of its surface remains a mystery. Establishing the global context of the distribution and timing of Europan geologic units forms a basis to understand regional and local scale processes, serves as a tool for the planning of future missions, and most of all is essential to gaining insight into the potential habitability of this icy world.

Scientific Investigations Map↗

USGS2026

Simulation of groundwater flow in the Silurian aquifer, eastern Iowa, 2020–45

The Silurian aquifer is an important water source for municipalities, industry, and rural households and communities in eastern Iowa, including Johnson County. Increasing demand for groundwater from the aquifer indicated that analytical tools may be beneficial to quantify groundwater resources and inform water-management decisions for the aquifer. The U.S. Geological Survey, in cooperation with the Johnson County Board of Supervisors, developed conceptual and numerical groundwater models to simulate water levels in the Silurian aquifer, determine groundwater budgets, and forecast changes in groundwater levels through 2045. A MODFLOW numerical model was constructed to match water levels for 2020 through 2022. Model performance was assessed by comparing simulated and observed water-level hydrographs at several pumping and monitoring wells. Hydrograph comparison indicates that the model simulates water levels accurately at monitoring wells that are not near areas of pumping and generally overpredicts water levels near pumping wells, while accurately simulating the drawdown trend over time at pumping wells. This transient model framework was then used to predict water levels through 2045 in a scenario of moderate drought and increased groundwater withdrawals. Results from the predictive model indicate as much as 13 meters of additional drawdown in 2045 from 2020 water levels in the area of pumping wells.

Iowa↗

USGS2025

A glimpse into the future of tectonic tremor monitoring

Tectonic tremor is a weak, long-duration seismic signal often observed in subduction zones and on some other plate-bounding faults. Because of tremor's characteristically low amplitude (and low signal-to-noise) and lack of clear phase arrivals, detecting and locating tremor usually requires techniques distinct from those applied to typical earthquakes. Major advances in detection and understanding of tremor have derived in the past from a powerful combination of new data and new analysis techniques. In a recent study, Sagae et al. (2025, https://doi.org/10.1029/2025jb031348 ) exploit that combination again, developing a new machine-learning based workflow and applying it to the S-net cabled seismic network in the Japan trench offshore northern Honshu. Their approach, although complex, succeeds in detecting several times more tremor activity than earlier studies, resulting in new insights and providing a blueprint for similar approaches that could be applied elsewhere. As real-time earthquake monitoring adopts similar tools, it may present an opportunity to bring tremor monitoring into operational workflows. In turn, this could solidify tremor monitoring as a component of future operational earthquake forecasting.

JGR Solid Earth↗

USGS2025

A method to obtain remotely sensed grain size distributions from nonplanar granular deposits

Constraining the grain size distribution of granular deposits with complex surfaces is difficult with existing approaches. Field and laboratory techniques are time consuming and limited by the maximum grain size that laboratories can accommodate. In this study, we present a new method to identify the coarse fraction of the grain size distribution at a debris-flow fan deposit surveyed with terrestrial laser scanning (TLS) in Glenwood Canyon, Colorado, USA. This method is a novel grain segmentation algorithm developed for application to point cloud data of deposits with complex surfaces and angular grains ranging in size from centimeters to a meter. This approach combines an existing random forest machine learning method with a novel iterative clustering algorithm. We compared the grain size distribution from our algorithm with a Wolman pebble count conducted in the field, and found a root mean squared error of less than 2 cm from the 5th to 95th percentile of the grain size distribution of grains ranging from cobble to boulder sized (6.3–78 cm in our application). Finally, we compared our new algorithm with an existing open-source grain segregation algorithm, and our method outperformed the selected alternative when applied to the debris-flow deposit point cloud.

Colorado↗

USGS2024

Coastal Science Navigator companion guide—Discover the U.S. Geological Survey coastal science products you need

The Coastal Science Navigator is an online gateway to a wide variety of U.S. Geological Survey (USGS) coastal change hazards-related information, data, and tools relevant to stakeholders’ scientific and decision-making needs. The products within the Coastal Science Navigator provide data related to past, present, and future threats to our coastlines. The filter search allows users to see all available products and identify relevant options by time scale, geographic scope, coastal hazard theme, and other filters. The guided search suggests products based on users’ answers to a short series of questions. A comprehensive summary is available for each product. The idea for the Coastal Science Navigator arose in 2020 in response to stakeholder feedback identifying the need for a central source for USGS coastal science information. It was published in July 2023 and initially included 55 products. Regular updates are planned to integrate other existing and new products. This guide introduces some of the many coastal change hazards-related products available through the USGS. In it, we showcase the products included in the Coastal Science Navigator’s initial publication in July 2023. While it is not representative of all the information, tools, and data available, we hope it serves as a compelling snapshot of what the USGS has to offer and encourages you to explore the Coastal Science Navigator to discover more of the products you need. To navigate this guide, the products have been organized by the time scale they are best suited for—past, present, or future—although many products cover multiple time scales. An additional section features software, one of the many product types available as filters within the Coastal Science Navigator. Other products include downloadable data, websites, and geonarratives (web pages that combine text, images, and interactive maps into narratives you can scroll through). Featured geographic scopes are also highlighted within this guide, detailing some of the many regions in which the USGS conducts research and illustrating another way to filter products within the Coastal Science Navigator.

Circular↗

USGS2024

RegionGrow3D: A deterministic analysis for characterizing discrete three-dimensional landslide source areas on a regional scale

Regional-scale characterization of shallow landslide hazards is important for reducing their destructive impact on society. These hazards are commonly characterized by (a) their location and likelihood using susceptibility maps, (b) landslide size and frequency using geomorphic scaling laws, and (c) the magnitude of disturbance required to cause landslides using initiation thresholds. Typically, this is accomplished through the use of inventories documenting the locations and triggering conditions of previous landslides. In the absence of comprehensive landslide inventories, physics-based slope stability models can be used to estimate landslide initiation potential and provide plausible distributions of landslide characteristics for a range of environmental and forcing conditions. However, these models are sometimes limited in their ability to capture key mechanisms tied to discrete three-dimensional (3D) landslide mechanics while possessing the computational efficiency required for broad-scale application. In this study, the RegionGrow3D (RG3D) model is developed to broadly simulate the area, volume, and location of landslides on a regional scale (≥1,000 km 2 ) using 3D, limit-equilibrium (LE)-based slope stability modeling. Furthermore, RG3D is incorporated into a susceptibility framework that quantifies landsliding uncertainty using a distribution of soil shear strengths and their associated probabilities, back-calculated from inventoried landslides using 3D LE-based landslide forensics. This framework is used to evaluate the influence of uncertainty tied to shear strength, rainfall scenarios, and antecedent soil moisture on potential landsliding and rainfall thresholds over a large region of the Oregon Coast Range, USA.

Journal of Geophysical Research: Earth Surface↗

USGS2026

The digital archivist: Automating legacy macroseismic data processing using large language models

Macroseismic data are a key resource to investigate shaking and damage from preinstrumental and early instrumental eras. However, data are often stored as inconsistently formatted reports describing observed shaking and damage, making manually parsing and interpreting accounts labor‐intensive. We introduce a novel workflow using Google’s Gemini 2.5 Pro large language model (LLM) to automate the extraction and structuring of macroseismic observations from summary reports. We apply this workflow to the 22 March 1957 M 5.3 Daly City, California, earthquake as a case study. We used Gemini to extract addresses, originally assigned modified Mercalli intensity values, and descriptions from each report. To address coordinate precision limits, addresses were geocoded via Google’s Geocoding application programming interface. This workflow yielded over 2300 geocoded intensity reports for the Daly City earthquake. We use the geocoded accounts, with the original report intensity assignments, to develop a shaking intensity map that in some respects rivals modern Did You Feel It? Maps. We also extract and present data for the 9 February 1971 M L 6.7 Sylmar, California, earthquake. Our results demonstrate the potential of LLMs for reliably extracting and analyzing large, unstructured macroseismic datasets. LLMs offer a scalable solution for rapidly digitizing macroseismic archives, enabling their broader use to constrain ground‐motion models in modern seismic hazard analysis and to improve our understanding of site effects in urban areas. The concepts explored here may also be applied to the handling of other legacy seismological and earth science data.

Seismological Research Letters↗

USGS2025

Did they feel it? Legacy maroseismic data illuminates an engimatic 20th century earthquake

The challenges and the importance of preserving legacy instrumental records of earthquakes are now well-recognized (e.g., Richards & Hellweg, 2020, https://doi.org/10.1785/0220200053 ). Seismologists may not be aware of parallel challenges and opportunities with legacy macroseismic data for earthquakes in the United States. For much of the 20th century, macroseismic data were collected by a series of U.S. government agencies using a standard questionnaire distributed on postcards. Published summaries of postcards provide macroseismic data akin to modern Did You Feel It? questionnaire responses. In this paper we focus on the M 6.5 Fickle Hill, California earthquake, on 21 December 1954 (Hellweg et al., 2025) as a proof-of-concept, illustrating the potential of what we dub Did They Feel It? (DTFI) data to improve our understanding of significant 20th century U.S. earthquakes for which instrumental data are sparse. Legacy macroseismic data interpreted following modern conventions can potentially constrain traditional ShakeMaps at a level of detail and accuracy that in some respects rival maps for modern earthquakes. The updated ShakeMap for the 1954 Fickle Hill earthquake, also drawing from recently published media and first-person accounts, supports the location, depth, and stress drop value estimated from available instrumental data (Hellweg et al., 2025).

California↗

USGS2025

Widespread anhydrite saturation in Laramide-age arc magmas of southwestern USA

Anhydrite is considered a rare mineral phase in magmas, with only ∼33 documented occurrences worldwide. However, anhydrite readily decomposes in the near-surface environment, making it difficult to recognize its former presence in rocks collected at or near Earth’s surface. In such samples, only small anhydrite inclusions fully shielded within other minerals can have survived. During a recent field trip to the southwestern USA, we sampled 17 Laramide-age (ca. 40−80 Ma) magma systems, most of which are associated with porphyry copper deposits. A systematic search for anhydrite inclusions preserved within apatite, amphibole, plagioclase, and quartz phenocrysts in ∼100 rock samples by optical microscopy and Raman spectroscopy revealed that each of these 17 magma systems was at least temporarily anhydrite-saturated. Also, most previously identified magmatic anhydrite-bearing intrusions are associated with porphyry copper deposits, and both intrusive and volcanic rocks containing magmatic anhydrite show high Sr/Y ratios. These observations suggest that anhydrite saturation and porphyry copper formation are linked via magma fractionation at high pressure. Compared to average arc magmas, anhydrite-bearing magmas are unusually oxidized and sulfur-rich and seem to also be unusually water-rich. Hence, our preferred interpretation is that magma generation and/or fractionation at high pressure promotes the formation of superhydrous and oxidized magmas, which in turn promotes high sulfur contents and ultimately the precipitation of anhydrite. The high mineralization potential of these magmas does not need to result from their high sulfur content but could be caused by other properties of high-pressure magmas.

Arizona, New Mexico↗

USGS2026

Black rails in Baja California

Summarizing records from 1905 to 2025, we document the presence and distribution of the California black rail ( Laterallus jamaicensis coturniculus ) in northwestern México, particularly Baja California and the Colorado River Delta. This subspecies has a restricted distribution in the western U.S. and northwestern México. We found few records over the past century: sparse detections in the early 1900s and an increase in reported records after 2000. Over 120 years, we compiled 35 documented records of California black rail occurrence in Baja California with a minimum reported count of 56 rails. Our call-broadcast survey methods reconfirmed previously occupied sites and documented the species at a previously unreported site. Surveys in the Baja California portion of the Colorado River Delta yielded 20 detections across nine survey events between 2000 and 2022. In April 2003, standardized surveys detected 12 California black rails: 7 in Bahía de San Quintín, 3 in Arroyo San Telmo, and 2 in Arroyo El Rosario. Our recent survey work (2022–2025) recorded maximum monthly counts of 31 detections at Bahía de San Quintín and 15 detections at Estero de Punta Banda, the latter representing a previously undocumented location for the subspecies. These surveys also yielded the first photographic and acoustic documentation of California black rail in México. The contribution of spatial and temporal data provided by citizen science platforms increased our understanding of the subspecies’ distribution. Enforceable protection of this subspecies’ habitat is needed to safeguard its persistence.

Baja California↗

USGS2024

Environmental monitoring of groundwater, surface water, and soil at the Ammonium Perchlorate Rocket Motor Destruction Facility at the Letterkenny Army Depot, Chambersburg, Pennsylvania, 2021

Letterkenny Army Depot in Chambersburg, Pennsylvania, built an Ammonium Perchlorate Rocket Motor Destruction (ARMD) Facility in 2016 to centralize rocket motor destruction and contain all waste during the destruction process. The U.S. Geological Survey has collected environmental samples from groundwater, surface water, and soils at ARMD since 2016. During 2021, samples were collected from four groundwater wells in September, one surface-water site in October, and five soil sites in November near the facility. Samples were analyzed for nutrients, trace metals, major ions, total volatile organic compounds, and perchlorate. Perchlorate was not detected in any 2021 samples. Groundwater results showed no constituents exceeded any U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL). Dissolved arsenic (As) was detected in one well above the reporting detection level (RDL) of 3 micrograms per liter (μg/L) at 5.4 μg/L but below its MCL of 10 μg/L. Dissolved iron (Fe) was the only inorganic constituent measured above an EPA secondary maximum contaminant level (SMCL). All groundwater samples collected in 2021 exceeded the Fe SMCL of 300 μg/L, with concentrations ranging from 390 μg/L to 3,500 μg/L. Surface-water data collected during 2021 showed no measured constituents in the surface-water sample that exceeded any EPA MCL or SMCL. Soil samples collected from 2016 through 2021 showed all concentrations of As exceeded the EPA soil screening levels of 3 milligrams per kilogram (mg/kg) but did not exceed the Pennsylvania medium-specific concentrations for As of 61 mg/kg. Arsenic concentrations in 2021 ranged from 9.1 mg/kg to 12.9 mg/kg. The 2021 results for the ARMD Facility indicate no increases in concentrations of reported compounds compared to data from 2016 to 2020. The contained burn treatment facility for demilitarization of rocket motors during 2021 appears to have operated without elevating concentrations of target compounds compared to previous years.

Pennsylvania↗

USGS2024

U.S.-Mexico Borderland & vegetation community map

People on both sides of the United States-Mexico border need a high-resolution, binational vegetation community map that spans the entire United States-Mexico borderlands. Traditionally, mapping efforts in this region were impeded by complex logistics related to the international border, differing national needs and plans, and resource allocations and priorities. To address this need, scientists from the U.S. Geological Survey (USGS) Southwest Biological Science Center partnered with the Sonoran Joint Venture, the U.S. Fish and Wildlife Service (FWS) Migratory Bird Program, data engineers from the Department of Biosystems Engineering at the University of Arizona, and collaborators from the Wildlands Network, the Borderlands Program to produce the first prototype land cover map within the overlapping Mojave Desert, Sonoran Desert, and the North American Bird Conservation Initiative’s Bird Conservation Region 33 (BCR33) using Landsat satellite data . BCR33 is an area of high biodiversity, providing habitat for bird species of concern and other wildlife. The land cover map supports FWS recovery plan efforts related to conservation planning activities for many species, including Yellow-billed Cuckoo ( Coccyzus americanus ), Cactus Ferruginous Pygmy-Owl ( Glaucidium brasilianum cactorum ), Southwestern Willow Flycatcher ( Empidonax traillii extimus ), Yuma Ridgway’s Rail ( Rallus obsoletus yumanensis ), Bendire’s thrasher ( Toxostoma bendirei ), LeConte’s thrasher ( Toxostoma lecontei ), Masked Bobwhite ( Colinus virginianus ridgwayi ), jaguar ( Panthera onca ), and endangered plants such as Bartram’s stonecrop ( Graptopetalum bartramii ) and the Pima pineapple cactus ( Coryphantha robustispina ssp. robustispina ). In 2024, a Phase-II map for the full BCR33 region was completed, increasing the understanding of the binational nature of natural communities. The published map and associated paper can be found here .

Borderland↗

USGS2025

Irrigated agriculture influences selenium levels in an endangered marsh bird

Selenium bioaccumulation in aquatic food webs poses risks to wildlife, particularly in wetlands receiving irrigation runoff. The Salton Sea, California’s largest lake, is primarily sustained by agricultural drainage. This drainage creates wetland habitat along the lakeshore that many bird species depend on, including the federally endangered Yuma Ridgway’s rail ( Rallus obsoletus yumanensis ). However, these marshes may pose an ecological trap – attracting rails despite high selenium exposure. We captured rails during the 2020–2023 breeding seasons and compared rail selenium levels within three types of marshes (fed with irrigation runoff, Colorado River water, or groundwater). We collected blood, breast feathers, and head feathers of rails in all three water sources for selenium comparisons. We tagged adult rails with GPS transmitters to locate nests and foraging locations where we collected eggshells, unhatched eggs, and prey. We assessed selenium exposure by collecting multiple prey species commonly eaten by rails in all three water sources. Selenium concentrations varied among sampling locations. Selenium concentrations in most sample types were predominately influenced by water source and marsh inflow velocity (sometimes in combination with marsh size). Distance to inflow, however, did not influence selenium concentrations in any sample type. Selenium concentrations were highest in agricultural-fed marshes compared to river-fed and spring-fed marshes. Increased marsh inflow velocities resulted in lower selenium concentrations. Given the risk of an ecological trap, our results suggest that supplementing wetlands with Colorado River water could mitigate selenium bioaccumulation in Yuma Ridgway’s rails.

California↗

USGS2023

Slow slip detectability in seafloor pressure records offshore Alaska

In subduction zones worldwide, seafloor pressure data are used to observe tectonic deformation, particularly from megathrust earthquakes and slow slip events (SSEs). However, such measurements are also sensitive to oceanographic circulation-generated pressures over a range of frequencies that conflate with tectonic signals of interest. Using seafloor pressure and temperature data from the Alaska Amphibious Community Seismic Experiment, and sea surface height data from satellite altimetry, we evaluate the efficacy of various seasonal and oceanographic pressure signal proxy corrections and conduct synthetic tests to determine their impact on the timing and amplitude prediction of ramp-like signals typical of SSEs. We find that subtracting out the first mode of the complex empirical orthogonal functions of the pressure records on either the shelf or slope yields signal root-mean-square error (RMS) reductions up to 73% or 80%, respectively. Additional correction with proxies that exploit the depth-dependent spatial coherence of pressure records provides cumulative variance reductions up to 83% and 93%, respectively. Our detectability tests show that the timing and amplitude of synthetic SSE-like ramps can be well constrained for ramp amplitudes ≥4 cm on the shelf and ≥2 cm on the slope, using a fully automated detector. The principal limits on detectability are residual abrupt changes in pressure that occur as part of the transition to and from summer to winter conditions but are not adequately characterized by our seasonal corrections, as well as the inability to properly account for instrumental drift, which is not readily separated from the seasonal signal.

Alaska↗

USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗

USGS2025

Broadband stochastic simulation of earthquake ground motions with multiple strong phases with an application to the 2023 Kahramanmaraş, Turkey (Türkiye), earthquake

Stochastic ground motion simulation models are often less accurate at lower frequencies than at higher frequencies when fitting recorded data unless supplemented by a deterministic forward directivity velocity pulse model. Moreover, time-modulated stochastic models, which adjust ground motion amplitudes over time, typically use functions that fail to capture multiple strong-motion phases. The February 2023 Turkey (Türkiye) earthquake exhibited diverse recordings, including near-fault and far-field motions with pulse-like and non-pulse-like characteristics, along with single and multiple strong-motion phases. To better represent such a diverse set of recordings, this study enhances a fully non-stationary site-based stochastic model without combining it with a deterministic model. Improvements include a new band-pass filter with upper- and lower-frequency limits, which refines the representation of the low-frequency content. Moreover, a time-modulating function that can represent energy arrival in multiple strong phases is introduced. The reference model’s parameters are identified by fitting to the energy content, zero-level crossings, and cumulative counts of positive-minima and negative-maxima of a target accelerogram. This fitting procedure is modified to address the increased number of parameters. These improvements broaden the reference model’s applicability while preserving its simplicity, a key aspect appealing to engineering practitioners. The improved model’s applicability is demonstrated by simulating a dataset from the February 2023 Türkiye earthquake, and the accuracy is tested using a pulse-like Next Generation Attenuation Relationships for Western United States dataset. Validations are performed based on total energy, zero-level crossings, Fourier amplitude spectrum, elastic response spectra, and peak ground motion parameters. Validations are performed schematically in the time and frequency domains and quantitatively using goodness-of-fit scores, various validation-metrics errors, and inter-period correlations. Overall, the improved stochastic model can effectively simulate a set of diverse ground motion recordings, including near-fault pulse-like records, records with multiple strong phases, and far-field motions across a broad frequency range.

Kahramanmaraş↗

USGS2026

Evaluation of stream capture related to groundwater pumping, middle Humboldt River Basin, Nevada

Historical, future, and potential stream capture from groundwater pumping in the middle Humboldt River Basin (MHRB), Nevada, is estimated using a calibrated numerical groundwater flow model. The model was developed to estimate (1) stream capture, which is the change in flux between the groundwater system and the Humboldt River and tributaries, and (2) change in streamflow, which is the change in streamflow estimated for the Imlay gage on the Humboldt River (U.S. Geological Survey streamgage 10333000). Historical stream capture for water years (WYs) 1961–2015 is estimated using recorded and estimated groundwater pumping during that period. Future (predictive) stream capture was based on historical stresses (WYs 1961–2015) using a scenario that simulated non-mine pumping from WY 2015 at a uniform rate for 100 years into the future. Potential stream capture throughout the middle Humboldt River Basin from groundwater pumping during varying durations of time are presented in a series of capture maps. Maps also are presented that show the potential to capture from groundwater evapotranspiration, as well as the storage changes for pumping duration of 100 years. Estimates of historical stream capture from the mainstem Humboldt River during the early 1960s are less than 400 acre-feet per year (acre-ft/yr) when groundwater withdrawals and pumping rates were relatively small compared to more recent times. In the late 1980s and early 1990s, groundwater withdrawals increased and estimated historical stream capture also increased from about 4,000 acre-ft/yr in the late 1980s and early 1990s to as much as 18,800 acre-feet (acre-ft) in WY 1998. In WY 2015, estimated historical stream capture declined to about 13,000 acre-ft because of decreasing groundwater withdrawals and lower streamflow during the drought of WYs 2012–15, resulting in less stream water available for capture. Stream capture was estimated for 100 years into the future based on WY 2015 non-mine pumping rates and mine-dewatering activity through WY 2015. Stream capture is forecast to increase to about 23,000 acre-ft/yr, and streamflow in the Humboldt River could decrease by as much as 19,000 acre-ft/yr. Pumping for mine-dewatering and the associated discharge of that water affects streamflow in the Humboldt River at Imlay, Nevada (U.S. Geological Survey streamgage 10333000). Historically, from WYs 1991 to 2015, streamflow was greater at Imlay gage during active mine-dewatering from mine-water discharge operations and increased by as much as 105,000 acre-ft in WY 1998. The increase was attributed mostly to the discharge of groundwater from mine-related dewatering operations directly into the mainstem Humboldt River or its tributaries, with some of this increase associated with return flows from discharge to rapid infiltration basins. Results indicate that streamflow at Imlay gage is expected to decrease by as much as 1,600 acre-ft/yr 30 years after mine-related pumping and discharge are discontinued. The streamflow reductions at the Imlay gage are expected to then decrease to around 500 acre-ft/yr, 100 years after mine-related pumping and discharge are discontinued. Potential capture maps were produced for pumping durations of 10, 25, 50, and 100 years. Capture map results indicate that areas of greater potential stream capture occur adjacent to the Humboldt River and for upstream tributaries areas north of the Humboldt River.

Nevada↗

USGS2024

Upper crustal seismic velocity structure of the Hayward fault zone, San Francisco Bay, California, USA: Results from the 2016 East Bay Seismic Experiment (EBSI-16)

We developed Vp, Vs, Vp / Vs ratio, and Poisson’s ratio models of the uppermost crust (<4 km depth) from the eastern San Francisco (SF) Bay (California, USA) to near the Calaveras fault along a 15-km-long, linear profile. Upper crustal velocities are highly variable beneath, west, and well east of the Hayward fault. We observe eight notable features, from west to east: (1) Near San Francisco Bay, there is an ~2-km-wide structure with high Vp / Vs ratios (up to 5) and Poisson’s ratios (up to 0.48) extending from the surface to the base of our model, which we suggest the structure is a near-vertical fault that lies along a straight-line projection between the Silver Creek fault to the south and the Point Richmond fault to the north. The structure may be part of an ~90-km-long fault along the eastern SF Bay. (2) The western East Bay Plain, the lower lying area between the bay and the hills, includes up to 800 m of low-velocity sediments ( Vp ~1600–3000 m/s, Vs ~500 m/s to ~1000 m/s), underlain by higher velocity basement rocks ( Vp ~3000–5800 m/s; Vs ~1000–1500 m/s). (3) Between ~1 km and 3 km east of the Bay shoreline, sediments thin in a series of steps (likely faults) toward the Hayward fault. (4) Between ~3 km west and ~1 km east of the Hayward fault (at the East Chabot fault) at depths greater than 1 km, basement Vp (up to 6000 m/s) and Vs (up to 2800 m/s) are high, and Vp / Vs ratios (<2) and Poisson’s ratios (<0.3) are low, suggesting crystalline rocks. Furthermore, a near-vertical zone of low Vp / Vs ratios and Poisson’s ratios is between near-surface traces of the Hayward and East Chabot faults, likely corresponding to the San Leandro Gabbro of Ponce et al. (2003) . (5) Eastward of the East Chabot fault in the upper 1.5 km, basement Vp (~3000 m/s to ~4200 m/s) and Vs (~1200–2000 m/s) are lower than those west of the fault. (6) In the eastern Hayward/Oakland Hills, there are zones of laterally varying, high- and low-velocity ( Vp ~2500–3000 m/s) Jurassic–Cretaceous and Tertiary sediments in the shallow subsurface that likely extend much deeper than imaged. (7) Seismic energy that propagates westward from sources east of the Hayward fault (HF) appear weaker than energy that propagates eastward from sources west of the HF, suggesting that the HF acts as a partial barrier to shallow seismic energy propagation into the more populated eastern SF Bay area. (8) Unlike many fault zones, it appears that the active trace of the Hayward fault (in our study area) is not cored by a prominent, low-velocity zone relative to rocks to the east and west of the active trace. However, the active trace does mark a prominent change from relatively higher velocities to the west and lower velocities to the east.

California↗