USGS ScienceSearch

SEARCH · USGS Science

Results for “Journal of Waterway, Port, Coastal, and Ocean Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,722 records · Page 68Linked to original sources

Triggering the 2022 eruption of Mauna Loa

Distinguishing periods of intermittent unrest from the run-up to eruption is a major challenge at volcanoes around the globe. Comparing multidisciplinary monitoring data with mineral chemistry that records the physical and spatio-temporal evolution of magmas fundamentally advances our ability to forecast eruptions. The recent eruption of Mauna Loa, Earth’s largest active volcano, provides a unique opportunity to differentiate unrest from run-up and improve forecasting of future eruptions. After decades of intermittent seismic and geodetic activity over 38 years of repose, Mauna Loa began erupting on 27 November 2022. Here we present a multidisciplinary synthesis that tracks the spatio-temporal evolution of precursory activity by integrating mineral and melt chemistry, fluid inclusion barometry, numerical modeling of mineral zoning, syn-eruptive gas plume measurements, the distribution and frequency of earthquake hypocenters, seismic velocity changes, and ground deformation. These diverse data indicate that the eruption occurred following a 2-month period of sustained magma intrusion from depths of 3–5 km up to 1–2 km beneath the summit caldera, providing a new model of the plumbing system at this very high threat volcano. Careful correlation of both the geochemistry and instrumental monitoring data improves our ability to distinguish unrest from the run-up to eruption by providing deeper understanding of the both the monitoring data and the magmatic system—an approach that could be applied at other volcanic systems worldwide.

Hawaii

Insights into widespread landsliding in southern Appalachia from Hurricane Helene

Between 23 and 27 September 2024, antecedent rain followed by Hurricane Helene produced one of the most damaging weather events in southern Appalachia history. The back-to-back storm events resulted in a maximum cumulative rainfall of 848 mm and hurricane-force wind gusts over 170 km/h in western North Carolina, eastern Tennessee, and southwestern Virginia. The resulting regional flooding, landslides, and tree blowdown caused over 100 fatalities, damaged or destroyed critical infrastructure and thousands of structures, and severed connectivity across the region. Over the next several weeks, a multi-agency landslide response produced a rapid hazard assessment and mapped 2217 landslides, 55% of which damaged infrastructure or property. Orographic uplift enhanced rainfall, resulting in concentrated landsliding along the ~250 km swath of the Blue Ridge escarpment in western North Carolina. Landslides initiated predominantly on windward-facing (southeast-facing) slopes, and localized clustering of initiation points indicated a strong influence of hillslope-scale meteorological and geomorphic factors. Many shallow landslides mobilized into larger, highly mobile, and damaging debris flows that graded into floods. Here, we put our preliminary observations in the context of historical storm-driven landslide events and open new avenues for investigating the nature and extent of landslides and their effects in southern Appalachia and similar environments.

Georgia, North Carolina, South Carolina, Tennessee

Ungulate migrations of the Western United States, volume 5

Many ungulates migrate between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. In 2018, the U.S. Department of the Interior established Secretarial Order 3362, which provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations by enhancing habitat quality for ungulates across the Western United States. In response to the order, the U.S. Geological Survey (USGS) created the Corridor Mapping Team, which is a collaboration among 11 State agencies, regional and Federal partners, and an expanding number of Tribal wildlife agencies. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States and publishes them in the USGS “Ungulate Migrations of the Western United States” report series. This report details migrations and seasonal ranges from 36 additional herds and includes 2 herd updates detailed in previous reports. The Corridor Mapping Team has mapped the migrations and seasonal ranges of 218 unique herds for the report series, including this report. The report series serves as a map-based inventory of the ungulate migrations across the Western United States for biologists, managers, policymakers, and conservation practitioners. Building on the previous report volumes in the series, volume 5 additionally describes some of the local and national initiatives that are incorporating the products, tools, and information from this growing USGS report series.

Navajo Nation

Results of phytoplankton sampling at National Stream Quality Accounting Network stations in Montana, 1975 water year

Twelve National Stream Quality Accounting Network stations were operated in Montana during the 1975 water year. The network was established for the purpose of acquiring a base of hydrologic data for use by agencies engaged in water-resources planning on a national or regional scale. Among the characteristics analyzed were phytoplankton identification and cell counts. Samples consisted of composites of equal aliquots, collected at the center of each quartile of flow, using modified suspended-sediment samplers and sediment collection techniques. Identification and counting were done using the Sedgwick-Rafter cell method. Cell counts ranged from 21 cells per millilitre at Flathead River at Flathead, British Columbia to 27,000 cells per millilitre at Yellowstone River near Sidney. The class Bacillariophyceae was most abundant in both number and variety at all sampling sites. Anabaena and Aphanizomenon of the phyllum Cyanophyta were found at six stations and two stations respectively. These two genera of blue-green algae often become abundant in enriched waters resulting in nuisance conditions.

Montana

Updating and recalibrating the integrated Santa Rosa Plain Hydrologic Model to assess stream depletion and to simulate future climate and management scenarios in Santa Rosa, Sonoma County, California

The Santa Rosa Plain Hydrologic Model (SRPHM) was developed and published in 2014 through a collaboration between the U.S. Geological Survey (USGS) and Sonoma Water to analyze the hydrologic system in the Santa Rosa Plain watershed, help meet the increasing demand for fresh water, and prepare for future uncertainties in water resources. The original model simulated hydrological conditions and water use from water years 1975 to 2010. Recently (2023), the USGS, in cooperation with Sonoma Water and the California State Water Resources Control Board, updated the SRPHM model to extend its simulation period to the end of the 2018 calendar year, incorporate new estimates of rural and agricultural water use, and use efficient input format for climate variables. The updated model was recalibrated, and evaluation of the new model calibration is included in this report. This report presents the results of comparing the hydraulic heads, streamflow, and groundwater budget simulated by the updated model with those generated by the original model and observed data. The main difference in the simulated budget between the original and updated SRPHM is the estimates of agricultural pumping, rural domestic pumping, and return flow generated from rural water use that was not simulated in the original model. The revised agricultural pumping is simulated using the agricultural package, which constrains pumping to available groundwater. The use of the agricultural package leads to a more realistic estimation of agricultural water use, with revised agricultural pumping being one-third less than that in the original model. The revised rural pumping is about half of the pumping in the original model because of using detailed parcel data to estimate population density in rural areas instead of coarse census tracts. Overall, average total inflows for water years 2006–10 simulated by the updated model were about 2 percent less than the original model, and the average total updated outflows were nearly 5 percent less than the original model. The updated model was then used to generate stream depletion maps, simulate climate change scenarios during 2019–99, and simulate water rights allocation using the Model for Decision Support in Integrated River Basin Management (MODSIM). The results from simulating eight future climate scenarios indicated either an increase in groundwater storage or no significant change in the next 80 years, along with an increase in recharge, an increase in actual evapotranspiration in six out of eight climate projections, and an increase in surface runoff. The increases in the simulated future groundwater storage, recharge, evapotranspiration, and runoff in most climate projections are mainly driven by the projected increase in precipitation in most of the future climate scenarios. The updated model also was used to test a pilot case study demonstrating water-resource allocation among different users with different water rights using the integrated MODSIM-Groundwater and Surface-Water Flow Model (GSFLOW) platform. The updated SRPHM serves as a valuable tool for analyzing historical and future hydrologic conditions in the Santa Rosa Plain watershed and preparing for future uncertainties.

California

The impact of source time function complexity on stress drop estimates

Earthquake stress drop—a key parameter for describing the energetics of earthquake rupture—can be estimated in several different, but theoretically equivalent, ways. However, independent estimates for the same earthquakes sometimes differ significantly. We find that earthquake source complexity plays a significant role in why theoretically (for simple rupture models) equivalent methods produce different estimates. We apply time‐ and frequency‐domain methods to estimate stress drops for real earthquakes in the SCARDEC (Seismic source ChAracteristics Retrieved from DEConvolving teleseismic body waves, Vallée and Douet, 2016 ) source time function (STF) database and analyze how rupture complexity drives stress‐drop estimate discrepancies. Specifically, we identify two complexity metrics—Brune relative energy (BRE) and spectral decay—that parameterize an earthquake’s complexity relative to the standard Brune model and strongly correlate with the estimate discrepancies. We find that the observed systematic magnitude–stress‐drop trends may reflect underlying changes in STF complexity, not necessarily trends in actual stress drop. Both the decay and BRE parameters vary systematically with magnitude, but whether this magnitude–complexity relationship is real remains unresolved.

Bulletin of the Seismological Society of America

The Sedimentary Geochemistry and Paleoenvironments Project Phase 2 data release: An open data resource for the study of Earth's environmental history

Geochemical data from sedimentary rocks are the primary source of information regarding Earth's surface evolution through time, including its air and water envelopes and interactions with life and deep Earth processes. The Sedimentary Geochemistry and Paleoenvironments Project (SGP) is a scientific consortium centered around open data and community-driven development of cyberinfrastructure tools and resources for sedimentary geochemistry and Earth history. Here we describe the SGP Phase 2 data release, which focused on incorporating Paleoproterozoic and Mesoproterozoic (2500–1000 million years ago) data and better accommodating carbonate data. This data release was built through the involvement of >200 researchers worldwide in academia, government, and industry, and provides the largest available public data resource for our user community in the academic fields of geochemistry, sedimentology, tectonics, paleontology, Earth history, and paleoclimate, as well as the petroleum and minerals industries. The dataset now encompasses 126,006 samples and 4,132,371 geochemical analyses. In addition to direct entry by SGP Team Members, we have ingested and incorporated datasets from the Geoscience Australia OZCHEM database, the Alberta Geological Survey, and the Deep-Time Marine Sedimentary Element Database (DM-SED) compilation. This paper details sampling in the Phase 2 dataset with respect to age, geography, lithology, and other geological characteristics, documents access via our search website and API, discusses possible issues and/or biases in the dataset that could impact analyses, describes plans for governance and stewardship of data from Indigenous lands, and serves as the citable reference paper for the data release.

Chemical Geology

To heal or not to heal?: 1. The effect of pore fluid pressure on the frictional healing behavior of lithologies in Oklahoma

The competition between fault healing (i.e., re-strengthening) and fault loading determines the timing and magnitude of fault failure within the seismic cycle. Repeating earthquakes can give observational estimates of fault healing rates, however, it is difficult to link laboratory studies of frictional healing and observed healing rates from repeating earthquakes in part because of uncertainty in lithology at depth. Due to well-constrained and relatively simple geology, earthquakes in Oklahoma can be linked to the granitic basement rock and to the Arbuckle Group, which is primarily composed of dolomite at earthquake depths. Here, we conduct friction experiments to measure healing rates of the two earthquake-bearing lithologies at confining pressures representative of earthquake depths and pore pressures ranging from 0% to 80% of the confining pressure. We measure frictional healing by executing slide-hold-slide tests with hold times ranging from 3 s to 3000 s. The friction experiments on the Troy Granite indicate that pore fluid pressure does not greatly affect healing rate. On the other hand, the dolomite of the Arbuckle Group exhibits decreased healing with increased pore fluid pressure, with weakening at the highest pore pressure. We hypothesize that this is due to an increase in dissolution of dolomite at high pore pressures/low effective normal stress. These healing rates are used in the companion paper to understand the moment-recurrence time behavior of repeating earthquakes in Prague, Oklahoma. This work has implications for possible enhanced dissolution and weakening behavior of the Arbuckle Group during wastewater injection activities.

Oklahoma

A great tsunami earthquake component of the 1957 Aleutian Islands earthquake

The great 1957 Aleutian Islands earthquake ruptured ∼1200 km of the plate boundary along the Aleutian subduction zone and produced a destructive tsunami across Hawaiʻi. Early seismic and tsunami analyses indicated that large megathrust fault slip was concentrated in the western Aleutian Islands, but tsunami waves generated by slip in the west cannot explain the large observed runup in Hawaiʻi far to the southeast. Recently mapped 1957 geologic deposits on eastern Aleutian Islands suggest occurrence of very large nearby slip. Jointly modeling tsunami runup along the eastern Aleutian and Hawaiian Islands together with tide gauge recordings across the Pacific resolves 12-26 m shallow slip along 600 km of the eastern Aleutian Islands in addition to modest, deeper western slip inferred from seismic records. The eastern near-trench slip results in an M W 8.3-8.6 tsunami earthquake component of the M W 8.6-8.8 rupture, comparable in size to the adjacent 1946 Aleutian tsunami earthquake to the east. The reexamination of the 1957 rupture confirms the tsunami hazards posed by the eastern Aleutian subduction zone to Hawaiʻi and lays the groundwork for investigation of large prehistoric earthquakes through modeling tsunami runup inferred from stratigraphic observations to constrain their rupture processes.

Alaska

Three-dimensional seismic velocity model for the Cascadia Subduction Zone with shallow soils and topography, version 1.7

The U.S. Geological Survey’s seismic velocity model for the Cascadia Subduction Zone provides P- and S-wave velocity ( V P and V S , respectively) information from 40.2° to 50.0° N. latitude and −129.0° to −121.0° W. longitude, and is used to support a variety of research topics, including three-dimensional (3D) earthquake simulations and seismic hazard assessment in the Pacific Northwest. This report describes an update to the previous version (v) 1.6 of the 3D seismic velocity model for the Cascadia Subduction Zone. This new model (herein referred to as v1.7) contains more detailed near-surface structure for improved earthquake ground motion modeling. Updated features include the addition of a new shallow soil velocity model in the top few hundred meters and the option of adding user-specified topography. Although v1.6 of the Cascadia seismic velocity model has a minimum V S of 600 meters per second (m/s), the new model (v1.7) has a minimum V S of approximately 40 m/s. Overall, this update will allow for more accurate ground motion estimates from 3D simulations of scenario earthquakes in the Cascadia Subduction Zone region.

British Columbia, California, Oregon, Washington

Characterizing precariously balanced rocks (PBRs) in the eastern United States for estimating maximum past earthquake ground motions

Fragile geologic features (FGFs) can be used to estimate an upper bound to the strength of earthquake ground shaking in the past thousands to tens of thousands of years. FGFs could be especially useful in the eastern United States, where few active faults are available for paleoseismic studies and where low seismic attenuation means that an earthquake could damage FGFs at large distances. This article describes a pilot study of one form of FGF, precariously balanced rocks (PBRs), in the Blue Ridge of Virginia, ∼160 km from the central Virginia seismic zone (CVSZ) and ∼100 km from Virginia’s Giles County seismic zone (GCSZ). The main goal is to develop and refine methods for studying PBRs in the eastern United States. Photogrammetric 3D models of the rocks were used to locate their centers of mass and delineate their basal contacts, with the latter corroborated by wrapping a wire around the bases to verify the circumferences. Relations between hill geometry and amplification were used to estimate topographic amplification. Seismometers on the PBRs provided the frequencies, amplitudes, and directions of rocking after giving the rocks gentle pushes. The levels of ground shaking likely to topple the rocks were compared with the median hazard curves from the U.S. Geological Survey’s National Seismic Hazard Model and were used to map magnitudes of earthquakes in the nearby region likely to topple the rocks. Results indicate that an M w ≥ 7.5 earthquake is needed in the CVSZ or near the 2020 Sparta, North Carolina, earthquake to topple the two most fragile PBRs and that an earthquake of ~ M w 7–7.5 in the GCSZ is needed. The fragilities and estimated ages of the PBRs (20–40 ka) are thus consistent with the absence of such events in the historical record in the nearby region.

eastern United States

Bayesian mapping of regionally grouped, sparse, univariate earth science data

Some earth science data are naturally grouped by region, and it is often desirable to map these data by region. However, if there are only a few samples within each region, then the map should be smoothed in an appropriate way to mitigate the problems that arise from having only a few samples. A smoothing algorithm based on a Bayesian hierarchical model is developed and presented in this report. This algorithm has several features that make it especially suitable for mapping earth science data: it can account for measurements that are censored, it can process multiple datasets with different measurement errors and different censoring thresholds, and it can calculate the uncertainty in any statistic that is mapped. The algorithm is demonstrated by mapping gold concentrations that are measured in streambed sediments in the Taylor Mountains quadrangle in southwestern Alaska.

Alaska

Collaborative drought science planning in the Colorado River Basin

The U.S. Geological Survey (USGS) is using collaborative, interdisciplinary planning to develop data and tools needed to optimize the management of water resources and land use by resource management agencies during an ongoing, multidecadal drought in the Colorado River Basin. The USGS Actionable and Strategic Integrated Science and Technology team works to build relationships with resource management agencies and other stakeholders who can benefit from the use of USGS data and products. In 2023, the Actionable and Strategic Integrated Science and Technology team hosted a series of collaborative workshops to bring together representatives of resource management agencies and other stakeholders (any person or entity with interests in a resource or location) with USGS program managers, scientists, and multidisciplinary subject matter experts to codevelop concepts for interdisciplinary drought science and technology projects to address pressing needs related to drought in the Colorado River Basin. Workshop participants identified current and recent scientific data that could be shared through a centralized online data portal. Workshop participants also identified drought science and technology needs and developed project concepts to address those science needs. Participants categorized project concepts based on their potential to develop short-, mid-, and long-term drought science data and tools, provide for the spatial or temporal expansion of ongoing USGS science projects, and address high-priority science needs. Participants developed nine project concepts: (1) understanding shifting ecohydrologic baselines, (2) San Juan River Basin synthesis, (3) incorporating dynamic land cover into hydrologic models, (4) aridification compared to drought, (5) surface water-groundwater interactions, (6) cascading effects of drought on dust, (7) cascading effects of drought on water availability, (8) cascading effects of drought on socioeconomic factors, and (9) the value of water in the Colorado River Basin. This report provides an overview of the 2023 Codesign Workshop Series, synthesized outcomes from workshop materials and discussions, and science project concepts that emerged from the collaborative meetings that will continue to be refined into science project proposals through codevelopment processes. This report also highlights lessons learned and next steps needed to receive feedback and testing of the USGS Science Collaboration Portal, continue collaboration to develop detailed specifics and steps for short-term wins, develop interdisciplinary project proposals, and implement science planning and studies.

Arizona, California, Colorado, Nevada, New Mexico,

ShakeAlert Earthquake Early Warning System performance during the Mw 7.0 offshore Cape Mendocino earthquake

The 5 December 2024 M w 7.0 Offshore Cape Mendocino earthquake was a challenging test of the U.S. West Coast ShakeAlert earthquake early warning system due to its offshore epicenter and limited near‐source station coverage. We analyzed real‐time performance of all components of the ShakeAlert system, including the seismic algorithms (earthquake point‐source integrated code [EPIC] and Finite‐fault rupture Detector [FinDer]), the geodetic algorithm (Geodetic First Approximation of Size and Time–peak ground displacement [GFAST‐PGD]), and network telemetry during the event. EPIC created the first solution for this earthquake 15 s after origin time with an initial magnitude estimate of M 5.6 and location error of 10 km from the Advanced National Seismic System epicenter. An early spurious trigger from station CE.89101 fortuitously maintained location accuracy and, correspondingly, magnitude accuracy. FinDer contributed its first solution at 18 s with a location estimate closer to the seismic network and produced two distinct rupture geometries, leading to minor fluctuations in estimated intensity contours. GFAST‐PGD did not meet alerting thresholds but otherwise performed as expected. Network latencies were <2 s for most stations, supporting the rapid detection of this earthquake by the system. Roughly five million alerts were delivered to cell phone devices in California and Oregon during this event. This was also the first instance of a school district‐wide ShakeAlert‐powered system being activated. Comparisons to recorded seismograms demonstrate that the maximum warning times before potentially damaging shaking (intensity 6+) were in the range of 5–55 s. Although the ShakeAlert system provided accurate solutions and useful alert delivery, this earthquake raised awareness of potential issues within the system, including the need for improved offshore location estimates, a combination of solutions from ShakeAlert servers, and handling of spurious triggers.

California

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri River near Kansas City, Missouri, August 8–9, 2023

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near 8 bridge crossings of the Missouri River near Kansas City, Missouri, on August 8–9, 2023. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches that extended about 1,550 to 1,640 feet longitudinally and generally extended laterally across the active channel from bank to bank during low floodflow to nonflood conditions. These surveys provided the channel geometry and hydraulic conditions of the river at the time of the surveys and provided characteristics of scour holes, which may be useful in developing or verifying predictive guidelines or equations for computing potential scour depth. The data collected from the surveys may also be useful to the Missouri Department of Transportation as a record of low floodflow conditions in regards to the stability and integrity of the bridges with respect to bridge scour. Bathymetric data were collected around every in-channel pier. Scour holes were at most piers where bathymetry could be obtained, except for those piers on banks or surrounded by riprap. All the bridge sites in this study were surveyed and documented in previous studies. The average difference between the bathymetric surfaces ranged from 0.07 to 4.16 feet higher in 2023 than 2019, which indicates overall deposition between the survey dates, as might be expected based purely on streamflow at the time of the survey. However, the average difference between the bathymetric surfaces ranged from 1.44 feet higher to 1.88 feet lower in 2023 than 2015, which indicates a dynamic equilibrium of scour and deposition overall between those surveys, despite the lower flow conditions in 2023. Similarly, the average difference between the bathymetric surfaces ranged from 3.18 feet higher to 5.19 feet lower in 2023 than 2011, which indicates a relative equilibrium between scour and deposition overall, albeit the trend was toward scour as might be expected because of the substantial flood event in 2011. Riprap blankets and alignment to flow had a substantial effect on the size of the scour hole for a given pier. Piers that were partially or fully surrounded by riprap blankets had scour holes that were substantially smaller (to nonexistent) compared to piers with no rock or riprap and effectively mitigated the scour holes historically observed at these piers. Several of the structures had piers that were skewed to primary approach flow. At most of the structures, the scour hole was deeper and longer on the side of the pier with impinging flow than the leeward side, with some amount of deposition on the leeward side, as typically observed at piers skewed to approach flow.

Kansas, Missouri

A practical decision tool for marine bird mortality assessments

Given the rise in anthropogenic, environmental, and disease events contributing to marine bird mortality, there is a critical need to improve the rigor of mortality assessments. Deficits in data collection and mortality estimation can hinder a manager’s ability to document the scale of events and assess population level impacts. Therefore, to inform decisions required during activities, such as conservation status assessments or harvest management, organizations may choose to incorporate mortality assessments into response plans. Resources, capacity, and assets to assess mortality vary across jurisdictions (federal, state, Indigenous, local, etc.), and clear guidance to support mortality assessments is often unavailable or not clearly addressed. Here, we present a decision support tool to help managers identify and evaluate survey options to assess bird mortality in a diverse array of scenarios. The objective of the decision tool is to improve data collection and availability, which will increase the ability to estimate mortality robustly, given situation-specific attributes and constraints. This decision tool is designed to guide the response when a mortality event is initially encountered and offers suggestions for assessment and reporting procedures in the absence of other guidance or to complement existing protocols. The decision tool is also meant to inform decision making for response determination and resource allocation. The tool facilitates examination of options for further assessment and monitoring, which users determine by examining questions pertaining to species prioritization, determination of mortality minimum spatial extent, and the potential magnitude of impacts on affected species. Finally, identification of appropriate survey methods that address imperfect detection when a complete census is not possible are determined by exploring location, spatial and temporal extent, and the type of species affected. Ultimately, this decision tool aims to facilitate and improve the standardization of mortality assessments, equipping managers with a practical resource to navigate the decision-making process for marine bird mortality estimation.

Ornithological Applications

Structural evolution of iron coordination in proteins across Earth’s oxygenation history

Protein metal-binding sites support essential biological functions shaped by protein fold, subunit interactions, and cofactor chemistry. Because these sites encode both biochemical function and environmental constraint, they offer a route to connect protein evolution with changes in Earth’s surface environment through time. Of particular interest is iron (Fe), the most widely used metal in biology and a cofactor central to both anaerobic and aerobic metabolism. Here, we systematically compare the immediate chemical environments of functionally essential Fe-binding sites in three-dimensional protein structures to test whether Fe coordination spheres differ across oxygen contexts. Using a curated dataset of experimentally determined structures, we identify a clear shift in the local chemistry of Fe-binding environments from anaerobic to aerobic proteins. Aerobic Fe sites are significantly more hydrophilic than anaerobic ones, and amino-acid composition analyses show reduced cysteine use in aerobic Fe-binding neighborhoods. These patterns suggest that as Earth’s surface environments became more oxygenated, proteins retained Fe as a core redox metal while reconfiguring local coordination chemistry in ways less vulnerable to oxidative damage. More broadly, this study introduces and applies the Coordination Sphere Analysis and Comparison (CSAC) workflow, an open and archived Python workflow for extracting local metal-binding environments from structure datasets, providing a framework for linking metalloprotein structure to evolutionary and geobiological transitions across Earth history.

Discover Life

Uranium—Deposits, production and resources, market dynamics, and supply chain risks

Introduction Interest in nuclear power for the generation of electricity has risen with the increase in the need for more diverse baseload power, enhanced energy security, and the development of new technologies, such as small modular reactors (SMRs), which could provide power for remote areas, industrial applications, and artificial intelligence (AI) data centers. In 2024, the U.S. Department of Energy received $2.7 billion in congressional funding to bolster the domestic uranium production and nuclear fuel supply chain and address reliance on imports from foreign suppliers. In 2025, the U.S. Government issued several Executive and Secretary’s orders aimed at revitalizing the U.S. nuclear sector. If SMRs are to be as widely deployed in the United States and worldwide as envisioned, demand for uranium (nuclear reactor fuel) will likely increase. After the Fukushima nuclear accident in 2011, the market spot price of uranium began a decline, followed by a decrease in U.S. and global uranium exploration and mine development expenditures that led to a uranium supply deficit until 2020, when prices started to recover, prompting a resurgence in uranium exploration and development. In January of 2024, the uranium spot price rose to a 17-year high $106 (U.S. dollars) per pound of U3O8 (triuranium oxide, commonly known as “yellowcake”), which is expected to increase uranium exploration, mine development, and uranium production domestically and worldwide.

Fact Sheet