USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Oceans”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources
USGS2012

Principal component analysis of interseismic deformation in southern California

Eight trilateration networks along the San Andreas fault in southern California have been surveyed repeatedly (8 to 19 times) within an approximately 15-year interval between 1971 and 1992. The data for each network were analyzed by principal component analysis to represent the observed changes in line length as a superposition of individual modes: L ij - L i = ∑ k A ik C k ( t j ), where L ij is the length of the i th line measured at the time t j , L i is the average length of the i th line, and A ik C k ( t j ) is the k th mode. Each mode is described by a common time function Ck(tj) that is evaluated only at the times t j of the surveys, and the participation of each line in that mode is described by a constant amplitude A ik for that line. For all networks the deformation is largely described by the first mode, and the first-mode time function is essentially linear in time. That is, the deformation in each of the networks appears to be steady. Two anomalies in the accumulation of deformation were observed: In the network near Palmdale a transient strain event occurred in the second mode in early 1982, and in the network within Cajon Pass, fluctuations in the accumulation of deformation somewhat greater than would be attributed to measurement error were found. Although both anomalies are formally significant given the estimated measurement error, I am not confident that either anomaly is real. The principal conclusion is that the accumulation of interseismic deformation in the southern California trilateration networks is steady within the precision of measurement.

Journal of Geophysical Research↗
USGS2012

Strain accumulation across the central Nevada seismic zone, 1973–1994

Five trilateration networks extending for 280 km along the central Nevada seismic zone (1915 Pleasant Valley, M = 7.3; 1954 Dixie Valley, M = 6.8; 1954 Stillwater, M = 6.8; 1954 Rainbow Mountain, M = 6.6; 1954 Fairview Peak, M = 7.1; and 1932 Cedar Mountain, M = 7.2) have been surveyed 6 times since 1973 to determine deformation along the zone. Within the precision of measurement the deformation appears uniform along the zone and is described by the principal strain rates 0.036±0.008 μstrain/yr N60°W±3° and −0.031±0.008 μstrain/yr N30°E±3°, extension reckoned positive. The observed strain rates are consistent with simple, right‐lateral, tensor shear at the rate of 0.033 μstrain/yr across a shear zone striking N15°W. This central Nevada shear zone appears to be the northward continuation of the eastern California shear zone. The orientation of the strike‐slip and normal‐slip ruptures within the central Nevada seismic zone are consistent with principal stress axes parallel to the measured principal strain rate axes. Space‐based geodetic measurements (very long baseline interferometry) indicate that the relative motion accommodated across the Basin and Range province west of Ely, Nevada, is about 9.1±1.5 mm/yr N16°W±8° (Dixon et al., 1995.) Notice that the right‐lateral shear zone postulated to explain deformation in the central Nevada seismic zone is properly oriented to accommodate that relative motion. However, a 135‐km effective width of the shear zone would be required to accommodate all of the 9.1 mm/yr relative motion at the strain rates observed in the Nevada seismic zone; only about 3 mm/yr of that relative motion is accommodated within the span of the trilateration networks.

California, Nevada↗
USGS1996

Crustal velocity field near the big bend of California's San Andreas fault

We use geodetic data spanning the 1920–1992 interval to estimate the horizontal velocity field near the big bend segment of California's San Andreas fault (SAF). More specifically, we estimate a horizontal velocity vector for each node of a two-dimensional grid that has a 15-min-by-15-min mesh and that extends between latitudes 34.0°N and 36.0°N and longitudes 117.5°W and 120.5°W. For this estimation process, we apply bilinear interpolation to transfer crustal deformation information from geodetic sites to the grid nodes. The data include over a half century of triangulation measurements, over two decades of repeated electronic distance measurements, a decade of repeated very long baseline interferometry measurements, and several years of Global Positioning System measurements. Magnitudes for our estimated velocity vectors have formal standard errors ranging from 0.7 to 6.8 mm/yr. Our derived velocity field shows that (1) relative motion associated with the SAF exceeds 30 mm/yr and is distributed on the Earth's surface across a band (>100 km wide) that is roughly centered on this fault; (2) when velocities are expressed relative to a fixed North America plate, the motion within our primary study region has a mean orientation of N44°W ± 2° and the surface trace of the SAF is congruent in shape to nearby contours of constant speed yet this trace is oriented between 5° and 10° counterclockwise relative to these contours; and (3) large strain rates (shear rates > 150 nrad/yr and/or areal dilatation rates < −150 nstr/yr) exist near the Garlock fault, near the White Wolf fault, and in the Ventura basin.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Tholeiitic‐alkalic transition at subglacial volcanoes, Tuya region, British Columbia, Canada

Ash Mountain, South Tuya, and Tuya Butte are three small basaltic volcanoes in the Stikine volcanic belt of northern British Columbia. The volcanoes rise 700, 500, and 400 m above their bases and are about 3.2, 1.6, and 2.6 km 3 in volume, respectively. They began eruptive activity under several hundred meters of overlying glacial ice, or water in an ice‐impounded lake, and undegassed pillow lava was erupted and forms the bases of all three. Later, as the vents grew into shallow water, explosive phreatomagmatic activity erupted partly degassed glassy tuffs. Finally, when the volcano emerged through the surface of the ice or water (or the water was drained), degassed subaerial lava flows were erupted and were converted to assemblages of foreset‐bedded pillow breccia and pillow lava when subaerial flows crossed a shoreline and flowed into meltwater lakes. The undegassed subglacial pillow base of Ash Mountain is overlain by partly degassed pillows and hyaloclastite tuff cut by dikes; at South Tuya the pillow base is overlain by hyaloclastite tuffs and lenses of pillow lava; at Tuya Butte the pillow base is overlain by foreset‐bedded pillow lava, pillow breccias, and hyaloclastite tuffs, which in turn are overlain by subaerial lava flows composing a small shield volcano. The undegassed basal subglacial pillow lava of the three volcanoes contain 0.10 ± 0.01 wt % sulfur and ∼0.5 wt % H 2 O. The overlying partly degassed assemblages contain 0.06 ± 0.02% sulfur and ∼0.2% H 2 O at Ash Mountain, 0.07±0.01% sulfur at South Tuya, and 0.03±0.01% sulfur at Tuya Butte. The differences in the degree of degassing can be related to the nature of eruption and quenching and the distance of flow of the subaerial lava. When the volcanoes switched from subglacial to shallow water or subaerial eruptions, as shown by change to more explosive activity and then to subaerial lava flows (and by a marked reduction of sulfur in volcanic glass), the magma shifted from tholeiitic to alkalic composition. This transition occurs at each of the three volcanoes. The tholeiitic and alkalic magmas cannot be related by shallow crystal fractionation and apparently originated by differing degrees of deep melting at a mantle source. Prior to eruption the tholeiitic melts overlay alkalic melts in shallow chambers underlying each of the volcanoes because of their lower density and were, therefore, the first to erupt under subglacial conditions. As the volcano grew through the ice (or ice‐impounded water), the volcanic conduit vented to the atmosphere, producing a partial depressurization of the conduit and the subsurface chamber. This sudden reduction in confining pressure caused enhanced vesiculation of volatile saturated melts, particularly of the more volatile‐rich alkalic melts, causing them to rise to the top of the chamber and erupt.

British Columbia↗
USGS1996

The 1992 M=7 Cape Mendocino, California, earthquake: Coseismic deformation at the south end of the Cascadia megathrust

We invert geodetic measurements of coseismic surface displacements to determine a dislocation model for the April 25, 1992, M = 7 Cape Mendocino, California, earthquake. The orientation of the model slip vector, which nearly parallels North America-Juan de Fuca relative plate convergence, and the location and orientation of the model fault relative to the offshore Cascadia megathrust, suggest that the 1992 Cape Mendocino earthquake is the first well-recorded event to relieve strain associated with the Cascadia subduction zone. We use data from three geodetic techniques: (1) the horizontal and vertical displacements of 13 monuments surveyed with the Global Positioning System, corrected for observed horizontal interseismic strain accumulation, (2) 88 section-elevation differences between leveling monuments, and (3) the uplift of 12 coastal sites observed from the die-off of intertidal marine organisms. Maximum observed displacements are 0.4 m of horizontal movement and 1.5 m of uplift along the coast. We use Monte Carlo techniques to estimate an optimal uniform slip rectangular fault geometry and its uncertainties. The optimal model using all the data resolves 4.9 m of slip on a 14 by 15 km fault that dips 28° SE. The fault extends from 1.5 to 8.7 km in depth and the main-shock hypocenter is close to the downdip projection of the fault. The shallowly dipping fault plane is consistent with the observed aftershock locations, and the estimated geodetic moment is 3.1 × 10 19 N m, 70% of the seismic moment. Other models that exclude leveling data collected in 1935 and 1942 are more consistent with seismological estimates of the fault geometry. If the earthquake is characteristic for this segment, the estimated horizontal slip vector compared with plate convergence rates suggests a recurrence interval of 140 years, with a 95% confidence range of 100–670 years. The coseismic uplift occurred in a region that also has high Quaternary uplift rates determined from marine terrace studies. If repeated ruptures of this southernmost segment of the Cascadia megathrust are responsible for the Quaternary uplift, a comparison of the coseismic uplift with coastal uplift rates suggests a recurrence interval of 200–400 years. Thus comparing horizontal and vertical coseismic to long-term deformation suggests a recurrence interval of about 100–300 years for M = 7 events at the south end of the Cascadia megathrust.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Mapping playa evaporite minerals and associated sediments in Death Valley, California, with multispectral thermal infrared images

Efflorescent salt crusts and associated sediments in Death Valley, California, were studied with remote-sensing data acquired by the NASA thermal infrared multispectral scanner (TIMS). Nine spectral classes that represent a variety of surface materials were distinguished, including several classes that reflect important aspects of the playa groundwater chemistry and hydrology. Evaporite crusts containing abundant thenardite (sodium sulfate) were mapped along the northern and eastern margins of the Cottonball Basin, areas where the inflow waters are rich in sodium. Gypsum (calcium sulfate) crusts were more common in the Badwater Basin, particularly near springs associated with calcic groundwaters along the western basin margin. Evaporite-rich crusts generally marked areas where groundwater is periodically near the surface and thus able to replenish the crusts though capillary evaporation. Detrital silicate minerals were prevalent in other parts of the salt pan where shallow groundwater does not affect the surface composition. The surface features in Death Valley change in response to climatic variations on several different timescales. For example, salt crusts on low-lying mudflats form and redissolve during seasonal-to-interannual cycles of wetting and desiccation. In contrast, recent flooding and erosion of rough-salt surfaces in Death Valley probably reflect increased regional precipitation spanning several decades. Remote-sensing observations of playas can provide a means for monitoring changes in evaporite facies and for better understanding the associated climatic processes. At present, such studies are limited by the availability of suitable airborne scanner data. However, with the launch of the Earth Observing System (EOS) AM-1 Platform in 1998, multispectral visible/near-infrared and thermal infrared remote-sensing data will become globally available.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Equatorial origin for Lower Jurassic radiolarian chert in the Franciscan Complex, San Rafael Mountains, southern California

Lower Jurassic radiolarian chert sampled at two localities in the San Rafael Mountains of southern California (∼20 km north of Santa Barbara) contains four components of remanent magnetization. Components A , B ′, and B are inferred to represent uplift, Miocene volcanism, and subduction/accretion overprint magnetizations, respectively. The fourth component ( C ), isolated between 580° and 680°C, shows a magnetic polarity stratigraphy and is interpreted as a primary magnetization acquired by the chert during, or soon after, deposition. Both sequences are late Pliensbachian to middle Toarcian in age, and an average paleolatitude calculated from all tilt-corrected C components is 1° ± 3° north or south. This result is consistent with deposition of the cherts beneath the equatorial zone of high biologic productivity and is similar to initial paleolatitudes determined for chert blocks in northern California and Mexico. This result supports our model, in which deep-water Franciscan-type cherts were deposited on the Farallon plate as it moved eastward beneath the equatorial productivity high, were accreted to the continental margin at low paleolatitudes, and were subsequently distributed northward by strike-slip faulting associated with movements of the Kula, Farallon, and Pacific plates. Upper Cretaceous turbidites of the Cachuma Formation were sampled at Agua Caliente Canyon to determine a constraining paleolatitude for accretion of the Jurassic chert sequences. These apparently unaltered rocks, however, were found to be completely overprinted by the A component of magnetization. Similar in situ directions and demagnetization behaviors observed in samples of other Upper Cretaceous turbidite sequences in southern and Baja California imply that these rocks might also give unreliable results.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Thermal and unroofing history of a thick, tilted Basin-and-Range crustal section in the Tortilla Mountains, Arizona

We estimate here a geothermal gradient of only 17 ± 5°C km −1 for the tilted Grayback fault block in southeastern Arizona when extension began ∼25 Ma. This gradient is lower than preextension gradients estimated elsewhere in the Basin and Range, is only about 50% of typical gradients in the Basin and Range today, and needs to be accounted for in models of continental extension. The Grayback block exposes a 12-km-thick crustal section of Proterozoic and Cretaceous granitoids, which was tilted 90° during extension between 25 and 15 Ma. Zircon fission-track ages decrease structurally downward (westward) across the block and were all within a zone of partial track annealing prior to tilting and quenching. The zircon age gradient suggests that the 220°–240°C isotherm migrated downward 5–6 km during Paleogene erosion and regional cooling. Apatite fission-track ages decrease westward from ∼83 Ma in the structurally highest crystalline rocks to ∼24 Ma at ∼6-km paleodepth and then to ∼15 Ma another 6 km farther west. Track-length analysis confirms that apatites above the break in slope in age at ∼5.7-km paleodepth resided in a zone of partial annealing prior to tilting, and deeper apatites record rapid cooling upon tilting and unroofing beginning ∼25 Ma. At that time the 110 ± 10°C isotherm determined by the depth at which tracks in apatite were fully erased was at a basement paleodepth of ∼5.7 km, and the 220 ± 30°C isotherm as estimated from zircon data resided at a pretilting basement depth of ∼12.15 km. From consistent values of paleogeothermal gradient for two depth intervals we estimate the pretilt gradient was 17 ± 5°C km −1 . From 25 to 15 Ma the rotating Grayback block cooled rapidly as higher, westward moving blocks unroofed it tectonically at a rate of ∼1 km m.y. −1 .

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Gravity field over the Sea of Galilee: Evidence for a composite basin along a transform fault

The Sea of Galilee (Lake Kinneret) is located at the northern portion of the Kinneret-Bet Shean basin, in the northern Dead Sea transform. Three hundred kilometers of continuous marine gravity data were collected in the lake and integrated with land gravity data to a distance of more than 20 km around the lake. Analyses of the gravity data resulted in a free-air anomaly map, a variable density Bouguer anomaly map, and a horizontal first derivative map of the Bouguer anomaly. These maps, together with gravity models of profiles across the lake and the area south of it, were used to infer the geometry of the basins in this region and the main faults of the transform system. The Sea of Galilee can be divided into two units. The southern half is a pull-apart that extends to the Kinarot Valley, south of the lake, whereas the northern half was formed by rotational opening and transverse normal faults. The deepest part of the basinal area is located well south of the deepest bathymetric depression. This implies that the northeastern part of the lake, where the bathymetry is the deepest, is a young feature that is actively subsiding now. The pull-apart basin is almost symmetrical in the southern part of the lake and in the Kinarot Valley south of the lake. This suggests that the basin here is bounded by strike-slip faults on both sides. The eastern boundary fault extends to the northern part of the lake, while the western fault does not cross the northern part. The main factor controlling the structural complexity of this area is the interaction of the Dead Sea transform with a subperpendicular fault system and rotated blocks.

Sea of Galilee↗
USGS1996

Three-dimensional P and S wave velocity structure of Redoubt Volcano, Alaska

The three‐dimensional P and S wave structure of Redoubt Volcano, Alaska, and the underlying crust to depths of 7–8 km is determined from 6219 P wave and 4008 S wave first‐arrival times recorded by a 30‐station seismograph network deployed on and around the volcano. First‐arrival times are calculated using a finite‐difference technique, which allows for flexible parameterization of the slowness model and easy inclusion of topography and source‐receiver geometry. The three‐dimensional P wave velocity structure and hypocenters are determined simultaneously, while the three‐dimensional S wave velocity model is determined using the relocated seismicity and an initial S wave velocity model derived from the P wave velocity model assuming an average Vp / Vs ratio of 1.78. Convergence is steady with approximately 73% and 52% reduction in P and S wave arrival time RMS, respectively, after 10 iterations. The most prominent feature observed in the three‐dimensional velocity models derived for both P and S waves is a relative low‐velocity, near‐vertical, pipelike structure approximately 1 km in diameter that extends from 1 to 6 km beneath sea level. This feature aligns axially with the bulk of seismicity and is interpreted as a highly fractured and altered zone encompassing a magma conduit. The velocity structure beneath the north flank of the volcano between depths of 1 and 6 km is characterized by large lateral velocity variations. High velocities within this region are interpreted as remnant dikes and sills and low velocities as regions along which magma migrates. No large low‐velocity body suggestive of a magma chamber is resolved in the upper 7–8 km of the crust.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Coral ages and island subsidence, Hilo drill hole

A 25.8-m-thick sedimentary section containing coral fragments occurs directly below a surface lava flow (the ∼1340 year old Panaewa lava flow) at the Hilo drill hole. Ten coral samples from this section dated by accelerator mass spectrometry (AMS) radiocarbon and five by thermal infrared multispectral scanner (TIMS) 230 Th/U methods show good agreement. The calcareous unit is 9790 years old at the bottom and 1690 years old at the top and was deposited in a shallow lagoon behind an actively growing reef. This sedimentary unit is underlain by a 34-m-thick lava flow which in turn overlies a thin volcaniclastic silt with coral fragments that yield a single 14 C date of 10,340 years. The age-depth relations of the dated samples can be compared with proposed eustatic sea level curves after allowance for island subsidence is taken. Island subsidence averages 2.2 mm/yr for the last 47 years based on measurements from a tide gage near the drill hole or 2.5–2.6 mm/yr for the last 500,000 years based on the ages and depths of a series of drowned coral reefs offshore from west Hawaii. The age-depth measurements of coral fragments are more consistent with eustatic sea levels as determined by coral dating at Barbados and Albrolhos Islands than those based on oxygen isotopic data from deep sea cores. The Panaewa lava flow entered a lagoon underlain by coral debris and covered the drill site with 30.9 m of lava of which 11 m was above sea level. This surface has now subsided to 4.2 m above sea level, but it demonstrates how a modern lava flow entering Hilo Bay would not only change the coastline but could extensively modify the offshore shelf.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Stress/strain changes and triggered seismicity at The Geysers, California

The principal results of this study of remotely triggered seismicity in The Geysers geothermal field are the demonstration that triggering (initiation of earthquake failure) depends on a critical strain threshold and that the threshold level increases with decreasing frequency, or, equivalently, depends on strain rate. This threshold function derives from (1) analyses of dynamic strains associated with surface waves of the triggering earthquakes, (2) statistically measured aftershock zone dimensions, and (3) analytic functional representations of strains associated with power production and tides. The threshold is also consistent with triggering by static strain changes and implies that both static and dynamic strains may cause aftershocks. The observation that triggered seismicity probably occurs in addition to background activity also provides an important constraint on the triggering process. Assuming the physical processes underlying earthquake nucleation to be the same, Gomberg [this issue] discusses seismicity triggered by the M W 7.3 Landers earthquake, its constraints on the variability of triggering thresholds with site, and the implications of time delays between triggering and triggered earthquakes. Our results enable us to reject the hypothesis that dynamic strains simply nudge prestressed faults over a Coulomb failure threshold sooner than they would have otherwise. We interpret the rate-dependent triggering threshold as evidence of several competing processes with different time constants, the faster one(s) facilitating failure and the other(s) inhibiting it. Such competition is a common feature of theories of slip instability. All these results, not surprisingly, imply that to understand earthquake triggering one must consider not only simple failure criteria requiring exceedence of some constant threshold but also the requirements for generating instabilities.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Thermal and mass implications of magmatic evolution in the Lassen volcanic region, California, and minimum constraints on basalt influx to the lower crust

We have analyzed the heat and mass demands of a petrologic model of basalt-driven magmatic evolution in which variously fractionated mafic magmas mix with silicic partial melts of the lower crust. We have formulated steady state heat budgets for two volcanically distinct areas in the Lassen region: the large, late Quaternary, intermediate to silicic Lassen volcanic center and the nearby, coeval, less evolved Caribou volcanic field. At Caribou volcanic field, heat provided by cooling and fractional crystallization of 52 km 3 of basalt is more than sufficient to produce 10 km of rhyolitic melt by partial melting of lower crust. Net heat added by basalt intrusion at Caribou volcanic field is equivalent to an increase in lower crustal heat flow of ∼7 mW m −2 , indicating that the field is not a major crustal thermal anomaly. Addition of cumulates from fractionation is offset by removal of erupted partial melts. A minimum basalt influx of 0.3 km 3 (km 2 Ma) −1 is needed to supply Caribou volcanic field. Our methodology does not fully account for an influx of basalt that remains in the crust as derivative intrusives. On the basis of comparison to deep heat flow, the input of basalt could be ∼3 to 7 times the amount we calculate. At Lassen volcanic center, at least 203 km 3 of mantle-derived basalt is needed to produce 141 km 3 of partial melt and drive the volcanic system. Partial melting mobilizes lower crustal material, augmenting the magmatic volume available for eruption at Lassen volcanic center; thus the erupted volume of 215 km 3 exceeds the calculated basalt input of 203 km 3 . The minimum basalt input of 1.6 km 3 (km 2 Ma) −1 is >5 times the minimum influx to the Caribou volcanic field. Basalt influx high enough to sustain considerable partial melting, coupled with locally high extension rate, is a crucial factor in development of Lassen volcanic center; in contrast, Caribou volcanic field has failed to develop into a large silicic center primarily because basalt supply there has been insufficient.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Rheology of water ices V and VI

We have measured the mechanical strength (σ) of pure water ices V and VI under steady state deformation conditions. Constant displacement rate compressional tests were conducted in a gas apparatus at confining pressures from 400 < P < 800 MPa, temperatures from 209 < T < 270 K, and strain rates 7 × 10 −7 < < 7 × 10 −4 s −1 . Most of the results fit to an empirical flow law of the form = A σ n exp {−( E * + PV *)/ RT }, where the four material constants A , n , E *, and V * are (for in inverse seconds and P and σ in megapascals) 10 23.0 , 6.0, 136 kJ/mol, and 29 cm 3 /mol, respectively, for ice V; and 10 6.7 , 4.5, 66 kJ/mol, and 11 cm 3 /mol, respectively, for ice VI. Ice VI may weaken to a mechanism of higher E * at T > 250 K. Ices V and VI are thus rheologically distinct but by coincidence have approximately the same strength under the conditions chosen for these experiments. To avoid misidentification, these tests are therefore accompanied by careful observations of the occurrences and characteristics of phase changes. One sample each of ice V and VI was quenched at pressure to metastably retain the high-pressure phase and the acquired deformation microstructures; X ray diffraction analysis of these samples confirmed the phase identification. Surface replicas of the deformed and quenched samples suggest that ice V probably deforms largely by dislocation creep, while ice VI deforms by a more complicated process involving substantial grain size reduction through recrystallization.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

The 40Ar/39Ar and K/Ar dating of lavas from the Hilo 1-km core hole, Hawaii Scientific Drilling Project

Mauna Kea lava flows cored in the Hilo hole range in age from <200 ka to about 400 ka based on 40 Ar/ 39 Ar incremental heating and K‐Ar analyses of 16 groundmass samples and one coexisting plagioclase. The lavas, all subaerially deposited, include a lower section consisting only of tholeiitic basalts and an upper section of interbedded alkalic, transitional tholeiitic, and tholeiitic basalts. The lower section has yielded predominantly complex, discordant 40 Ar/ 39 Ar age spectra that result from mobility of 40 Ar and perhaps K, the presence of excess 40 Ar, and redistribution of 39 Ar by recoil. Comparison of K‐Ar ages with 40 Ar/ 39 Ar integrated ages indicates that some of these samples have also lost 39 Ar. Nevertheless, two plateau ages of 391 ± 40 and 400 ± 26 ka from deep in the hole, combined with data from the upper section, show that the tholeiitic section accumulated at an average rate of about 7 to 8 m/kyr and has a mean recurrence interval of 0.5 kyr/flow unit. Samples from the upper section yield relatively precise 40 Ar/ 39 Ar plateau and isotope correlation ages of 326 ± 23, 241 ± 5, 232 ± 4, and 199 ± 9 ka for depths of −415.7 m to −299.2 m. Within their uncertainty, these ages define a linear relationship with depth, with an average accumulation rate of 0.9 m/kyr and an average recurrence interval of 4.8 kyr/flow unit. The top of the Mauna Kea sequence at −280 m must be older than the plateau age of 132 ± 32 ka, obtained for the basal Mauna Loa flow in the corehole. The upward decrease in lava accumulation rate is a consequence of the decreasing magma supply available to Mauna Kea as it rode the Pacific plate away from its magma source, the Hawaiian mantle plume. The age‐depth relation in the core hole may be used to test and refine models that relate the growth of Mauna Kea to the thermal and compositional structure of the mantle plume.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Crustal structure of the Colorado Plateau, Arizona: Application of new long-offset seismic data analysis techniques

The Colorado Plateau is a large crustal block in the southwestern United States that has been raised intact nearly 2 km above sea level since Cretaceous marine sediments were deposited on its surface. Controversy exists concerning the thickness of the plateau crust and the source of its buoyancy. Interpretations of seismic data collected on the plateau vary as to whether the crust is closer to 40 or 50 km thick. A thick crust could support the observed topography of the Colorado Plateau isostatically, while a thinner crust would indicate the presence of an underlying low-density mantle. This paper reports results on long-offset seismic data collected during the 1989 segment of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that extended from the Transition Zone into the Colorado Plateau in northwest Arizona. We apply two new methods to analyze long-offset data that employ finite difference travel time calculations: (1) a first-arrival time inverter to find upper crustal velocity structure and (2) a forward-modeling technique that allows the direct use of the inverted upper crustal solution in modeling secondary reflected arrivals. We find that the crustal thickness increases from 30 km beneath the metamorphic core complexes in the southern Basin and Range province to about 42 km beneath the northern Transition Zone and southern Colorado Plateau margin. We observe some crustal thinning (to ∼37 km thick) and slightly higher lower crustal velocities farther inboard; beneath the Kaibab uplift on the north rim of the Grand Canyon the crust thickens to a maximum of 48 km. We observe a nonuniform crustal thickness beneath the Colorado Plateau that varies by ∼15% and corresponds approximately to variations in topography with the thickest crust underlying the highest elevations. Crustal compositions (as inferred from seismic velocities) appear to be the same beneath the Colorado Plateau as those in the Basin and Range province to the southwest, implying that the plateau crust represents an unextended version of the Basin and Range. Some of the variability in crustal structure appears to correspond to preserved lithospheric discontinuities that date back to the Proterozoic Era.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Analysis of fractures intersecting Kahi Puka Well 1 and its relation to the growth of the island of Hawaii

As part of the Hawaii Scientific Drilling Project, Kahi Puka Well 1 penetrated about 275 m of Mauna Loa basalts overlying a sequence of Mauna Kea flow units as it was drilled and cored to a total depth of 1053 m below land surface. A borehole televiewer (BHTV) was run in most of the well in successive stages prior to casing in order to obtain magnetically oriented acoustic images of the borehole wall. A total of 283 individual fractures were identified from this log and characterized in terms of strike and dip. These data are divided into three vertical sections based upon age and volcanic source, and lower hemisphere stereographic plots identify two predominant, subparallel fracture subsets common to each section. Assuming that most of the steeply dipping fractures observed in the BHTV log are tensile features generated within basalt flows during deposition and cooling, this fracture information can be combined with models of the evolution of the island of Hawaii to investigate the depositional history of these Mauna Loa and Mauna Kea basalts over the past 400 kyr. The directions of high-angle fractures appear to be generally parallel to topography or to the coastline at the time of deposition, as is supported by surface mapping of modern flows. Consequently, an overall counterclockwise rotation of about 75?? in the strike of these fractures from the bottom to the top of the well represents a systematic change in depositional slope direction over time. We attribute the observed rotation in the orientations of the two predominant fracture subsets over the past 400 kyr to changes in the configurations of volcanic sources during shield building and to the structural interference of adjacent volcanoes that produces shifts in topographic patterns.

Journal of Geophysical Research B: Solid Earth↗