USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Computational Physics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 68Linked to original sources
USGS2026

Reassessing water availability in the Nile River Basin using satellite-based irrigation water use accounting

Existing estimates of irrigation areas and water use in the Nile River Basin vary widely and are based on inconsistent data and methodologies. This study leverages advances in remote sensing to provide an up-to-date and consistent basin-wide reassessment of water use in the Nile River Basin. Land cover and actual evapotranspiration data from 2013 to 2022 were used to quantify irrigated areas, irrigation water use, and the average naturalized water yield. Across the basin, 7.1 million hectares of irrigated land consume an average of 72.5 ± 2.6 billion cubic meters (BCM) of blue water annually. Egypt and Sudan together account for 92% of the irrigated area and 97% of the irrigation water use. The basin’s average naturalized yield, evaluated at Dongola station, is determined to be between 108 and 114.4 ± 3.2 BCM. Although conservative, this updated analysis indicates the basin’s average naturalized yield is 14%–20% higher than the previous naturalized yield estimate (95 BCM) and 29%–36% higher than the commonly cited observed flow of 84 BCM, which is frequently treated as the total basin-wide available water. Importantly, the study underscores that the 84 BCM represents flow at the Aswan gauging station after upstream consumptive uses, not the total water available in the basin under naturalized conditions. This distinction is critical for accurate water accounting, planning, and governance in this water-scarce basin. This study demonstrates the value of open-source remote sensing resources in data-scarce regions while emphasizing the need for region specific validation and bias correction for improved accuracy.

Nile River Basin↗
USGS2026

Postglacial ecosystem development of a hydrothermal landscape in Yellowstone National Park

The Yellowstone geo-ecosystem has been the subject of much research, but the ecological history of the Yellowstone Plateau volcanic field and its iconic geyser basins is less known. In this investigation, paleoenvironmental analyses of sediment cores from lakes in Lower Geyser Basin were compared with regional records and paleoclimate model simulations to reconstruct the vegetation, wildfire, limnology, hydrothermal dynamics, and climate drivers since deglaciation, 15,000 to 14,000 years ago. Pollen data from Lower Geyser Basin lakes reveal the strong influence of infertile rhyolitic soils on vegetation history: an initial late-glacial steppe was replaced by lodgepole pine forest from 12.8 to 11.0 ka, with little change in forest composition or cover thereafter despite changing climate. This stability contrasts with the more dynamic vegetation response on nonrhyolite substrates in the Yellowstone region where nutrient and moisture availability is greater. Highest wildfire activity and low lake nutrient levels in Lower Geyser Basin occurred from 12 to 4 ka, when summers were substantially warmer and drier and fire-inducing vapor pressure deficits were 29 to 56% higher. The hydrothermal history, inferred from sedimentary arsenic and cesium abundances, was spatially and temporally variable but lake-forming hydrothermal events align with periods of abundant moisture. Thus, long-term changes in wildfire, limnology, and, to some extent, hydrothermal activity were governed by insolation-driven climate variations, whereas the vegetation response was muted and constrained by geologic processes. These findings suggest that warmer, drier conditions in the future could result in less hydrothermal activity yet little change in forest cover across the Yellowstone Plateau volcanic field despite more wildfires.

Idaho, Montana, Wyoming↗
USGS2024

Seismic techniques and suggested instrumentation to monitor volcanoes

Introduction Changes in the pressure or location of magma can stress or break surrounding rocks and trigger flow of nearby waters and gases, causing seismic signals, such as discrete earthquakes and tremor. These phenomena are types of seismic unrest that commonly precede eruption and can be used to forecast volcanic activity. Mass movements at the surface, including avalanches, debris flows, and lahars, may also generate seismic signals that are specifically addressed in chapter H , this volume (Thelen and others, 2024). Our focus in this chapter is to determine the levels of instrumentation recommended to produce high-quality, well-constrained seismic observations important for early warning of impending eruptions, detecting changes in ongoing eruptions, and characterizing other hazardous volcanic events. There are emerging techniques and new types of instrumentation, such as distributed acoustic sensing or rotational seismometers, that we do not consider here. These types of instrumentation show promise for monitoring but still require maturation before being considered more generally in volcano monitoring. Most of the capabilities mentioned below are universal for all types of volcanic systems, although some are best applied to stratovolcanoes with an apical single vent. In some settings, such as calderas or shield volcanoes, we must broaden coverage to include multiple possible storage regions or vent locations. As an example, Thelen (2014) discretized the long rift zones of shield volcanoes in Hawaiʻi as a set of evenly spaced “vents.” In this construct, each vent comes with recommendations, and several thousand network configurations were simulated to assess the effect on network quality levels and to determine the most efficient network design. The same process could be applied in a caldera setting or a volcanic field, where an evenly spaced grid of potential vents is considered. Localized recommendations for each unique system are beyond the scope of this report and left up to local experts to assess based on the conditions, restrictions, and requirements of each volcano.

Scientific Investigations Report↗
USGS2025

Tracing fluid evolution during batholith and deposit formation: In-situ and bulk rock Mo isotopes from the Questa porphyry Mo deposit, New Mexico, USA

The Oligocene Questa porphyry Mo deposit, located in New Mexico, USA, is a well-characterized system that formed over 400 kyr, punctuating the 8 Myr formation of the Questa-Latir batholith. Detailed sampling of the intrusions and minerals associated with magmatichydrothermal mineralization, as well as bookending barren intrusions, allows for examination of the Mo isotope record of the deposit and its host batholith. Through this established chronologic framework, such data can yield insights into the metallogenesis of deposit formation and long-term magma genesis evolution for upper crustal magmatism. The Mo isotopic compositions of barren intrusions yield a younging trend towards lighter δ 98 Mo. However, intrusions associated with Mo deposit formation yield heavier δ 98 Mo relative to barren magmatism, by up to 2.0‰. This indicates that they were affected by an isotopically heavy and Mo-rich fluid. The in-situ data from molybdenite covers the range observed in mineralized bulk rocks. However, individual samples consistently yield Mo isotopic variations of 0.4‰ to 0.5‰. The consistency of the δ 98 Mo variation in in-situ analyses of molybdenite within hand samples and individual mineral grains is likely the result of MoS 2 crystallization in a closed system and reflects an almost complete precipitation of Mo.

New Mexico↗
USGS2025

Ungulate migrations of the Western United States, volume 5

Many ungulates migrate between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. In 2018, the U.S. Department of the Interior established Secretarial Order 3362, which provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations by enhancing habitat quality for ungulates across the Western United States. In response to the order, the U.S. Geological Survey (USGS) created the Corridor Mapping Team, which is a collaboration among 11 State agencies, regional and Federal partners, and an expanding number of Tribal wildlife agencies. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States and publishes them in the USGS “Ungulate Migrations of the Western United States” report series. This report details migrations and seasonal ranges from 36 additional herds and includes 2 herd updates detailed in previous reports. The Corridor Mapping Team has mapped the migrations and seasonal ranges of 218 unique herds for the report series, including this report. The report series serves as a map-based inventory of the ungulate migrations across the Western United States for biologists, managers, policymakers, and conservation practitioners. Building on the previous report volumes in the series, volume 5 additionally describes some of the local and national initiatives that are incorporating the products, tools, and information from this growing USGS report series.

Navajo Nation↗
USGS2026

Global pegmatite-hosted lithium, cesium, and rubidium resources: A dataset for grade and tonnage modeling

Quantitative mineral resource assessments of potential undiscovered deposits can inform future mineral supply scenarios, but their accuracy is conditional on building robust grade and tonnage models of known deposits. This study presents an up-to-date global compilation and analysis of recently discovered and original, in-situ pegmatite-hosted Li, Cs, and Rb resources prior to historic production. Our analysis yields a median tonnage of 21.2 million tons (Mt) and grade of 1.12% Li 2 O, respectively, for global Li pegmatite deposits ( n = 73). The grades and tonnages of Li pegmatite resources vary depending on the age of the bedrock host domain, pegmatite crystallization age, and primary ore mineralogy. Lithium pegmatite resources hosted in Archean to transitional Archean-Paleoproterozoic domains have the largest median tonnage (29.8 Mt; n = 38), and those hosted in Paleoproterozoic to Mesoproterozoic domains have smaller median tonnages (6.5 Mt; n = 16). Cesium deposits where pollucite is the primary ore mineral have a bimodal grade distribution, with modes of 2.40 and 0.035 wt% Cs 2 O for high- and low-grade deposits, respectively, while Rb deposits are more unimodal with a median grade of 0.247 wt% Rb 2 O. Pegmatite-hosted Cs and Rb resources have median tonnages of 7.6 and 6.3 Mt, respectively. Covariation between ore mineralogy and the degree of crustal enrichment in pegmatite-hosted deposits is diagnostic of petrogenetic differences, including melt source characteristics, magma evolution, or variable degrees of volatile solubility. The Li pegmatite compilation is suitable for fitting robust numerical models to support quantitative assessments. More well-defined Rb and Cs pegmatite resources are required for quantitative assessments, but these data provide useful information about original in-place resources for framing supply discussions.

Ore Geology Reviews↗
USGS2000

Stormflow chemistry in the Santa Ana River below Prado Dam and at the diversion downstream from Imperial Highway, southern California, 1995-98

The Santa Ana River drains about 2,670 square miles of the densely populated coastal area of southern California, near Los Angeles. Almost all the flow in the river, more than 200,000 acre-feet annually, is diverted into ponds where it infiltrates and recharges underlying aquifers. About 2 million people are dependent on these aquifers for water supply. Stormflow in the Santa Ana River is considered a source of "high-quality" water suitable for use as a source of ground-water recharge. To test this assumption, stormflow samples were collected at two locations--below Prado Dam and at the diversion point downstream from Imperial Highway--for 12 winter storms between 1995 and 1998. Nitrate concentrations decreased during stormflow from a median concentration of 7.8 milligrams per liter in base flow to concentrations less than 1 milligram per liter in some large storms. Concentrations of chemically reduced forms of nitrogen (nitrite, ammonia, and organic nitrogen) increased during stormflow and are the predominant forms of nitrogen in large stormflows. Dissolved organic carbon (DOC) concentrations increased from a median concentration of 4.6 milligrams per liter in base flow to more than 20 milligrams per liter in some stormflows. Concentrations of DOC were especially high during the first storm of the rainy season, and large increases in DOC concentrations were measured even as a result of small early season storms that did not cause large increases in streamflow. DOC present during early season stormflow had less ultraviolet absorbance at 254 nanometers (UV 254 ) per unit of carbon than did DOC from late season stormflows. DOC in water held in storage behind Prado Dam had the highest UV 254 absorbance per unit of carbon. Maximum pesticide concentrations in stormflow did not exceed U.S. Environmental Protection Agency Maximum Contaminant Levels. Most pesticide concentrations were less than 1 microgram per liter and less than the detection limits obtained using standard drinking water analyses. Increases in concentrations of pesticides such as diazinon, malathion, and chlorpyrifos in stormflow result from runoff from urban areas downstream from Prado Dam. In general, large late season stormflows have the most pesticide detections of all stormflows sampled. Concentrations of methyl tert-butyl ether (MTBE), a gasoline additive, during base flow were as high as 0.9 microgram per liter and concentrations decreased during stormflow. Like pesticides, the concentrations did not exceed the U.S. Environmental Protection Agency Maximum Contaminant Levels for MTBE.

California↗
USGS2025

Improved prediction of postfire debris flows through rainfall anomaly maps

Predicting where runoff-generated debris flows might occur during rainfall on steep, recently burned terrain is challenging. Studies of mass-movement processes in unburned areas indicate that event locations are well-predicted by rainfall anomaly, R* , in which peak observed rainfall is normalized by local rainfall climatology. Here, we use remote and field methods to map debris flows triggered within the 2020 Dolan Fire burn area in coastal California, demonstrate that a short-duration R* metric predicts debris-flow occurrence more effectively than absolute peak intensity or longer-duration rainfall metrics, and show that incorporating an R* criterion into an existing debris-flow likelihood model can reduce false positive predictions and improve accuracy. We test R * at three other climatically distinct fires in California, demonstrating its utility for mapping likely debris-flow locations in different climates. We also consider how R* can benefit postfire debris-flow prediction given recent increases in climatological variability within individual burn perimeters.

Callifornia↗
USGS2025

Strong shaking from past Cascadia Subduction Zone earthquakes encoded in coastal landforms

Strong earthquakes along subduction zones are often devastating events, but sparse records along some tectonic margins limit our understanding of seismic hazards. Constraining shaking intensities is critical, especially in subduction zones with infrequent but large-magnitude earthquakes like the Cascadia Subduction Zone (CSZ), where the lack of recorded ground motions has led to uncertainty in the severity and potential impacts of future earthquakes. Here we fill this observational gap with a novel inventory of quantitative estimates of past shaking intensities from geotechnical modeling of coastal landforms. One hundred fifty-four deep-seated landslides and 65 fragile geologic features constrain minimum and maximum peak ground accelerations, respectively. These estimates are broadly consistent with model predictions of M9 ruptures, suggesting strong shaking of 0.4–0.8 g during past CSZ earthquakes. Local discrepancies between our geologic shaking constraints and earthquake simulations may inform past rupture behavior, leading to better predictions of shaking intensity for future earthquakes.

California, Oregon, Washington↗
USGS2025

Igneous differentiation in arcs

This chapter assesses crystallization-differentiation of convergent-margin magmas both from the standpoints of natural rock suites and from laboratory phase-equilibrium experiments. Crystallization-differentiation of dry subalkaline and alkaline basalts are summarized at the beginning for reference and context. Experiments crystallizing arc basalts through andesites at middle to upper crustal pressures (100–400 MPa), saturated either with H 2 O or mixed H 2 O-CO 2 , produce liquid lines of descent similar to arc igneous suites, with higher f O 2 s giving results closer to calc-alkaline magma series. Early enrichment of melts in SiO 2 with little or no enrichment in FeO* (total Fe as FeO) comes about by the combined effects of H 2 O suppressing crystallization of plagioclase relative to olivine, shifting plagioclase to more calcic – therefore lower SiO 2 – compositions, and suppressing silicate minerals to greater extents than Fe-rich spinel. Also contributing to SiO 2 enrichment is crystallization near the liquidus of higher proportions of olivine relative to calcic clinopyroxene, compared with MORB, but it is unclear if this is brought about by H 2 O or elevated pressure. Exhumed arc terranes, however, generally fail to expose evidence for primitive liquids having reached and differentiated at middle to upper crustal depths, at least in any abundance. Instead, most differentiation in arcs appears to take place in the lower crust or near the crust-mantle transition, and although hydrous experiments at such pressures produce liquids broadly similar to arc suites in their SiO 2 enrichment, the experimental liquids differ in becoming peraluminous at early stages of differentiation while melts have basaltic, basaltic andesitic, or andesitic SiO 2 concentrations. Crystallization of abundant calcic clinopyroxene close to the liquidus causes the high-pressure experimental liquids to become peraluminous with only small increases in SiO 2 concentration. In contrast, natural arc volcanic and plutonic suites become gradually less metaluminous with increasing SiO 2 , crossing to peraluminous at dacitic to rhyolitic SiO 2 concentrations. Hybridism, encompassing magma-mixing, assimilation of old crust, and incorporation of near-solidus melts from only shortly older deep, antecedent arc intrusions may accompany natural crystallization-differentiation, preventing melts from attaining peraluminous compositions at low-SiO 2 concentrations. If so, then nearly all arc suites are to substantial extents composites, rather than preserving simple, progressive liquid lines of descent. Some comments and assessments are also made on the participation of garnet in arc differentiation and on the production of arc batholiths.

Book chapter↗
USGS2025

Critical minerals in mine waste

Introduction Critical minerals are commodities with vulnerable supply chains that play a vital role in supporting the United States’ economy, national defense and security, emerging technologies, and energy independence. The prosperity of our Nation depends on generating a resilient supply of domestic critical minerals; mine waste may be an untapped source of these commodities. Mine waste from centuries of legacy mining persist on the landscape and may contain critical minerals and other valuable commodities previously deemed uneconomic to recover. At modern mines, the financial viability of recovering byproduct critical minerals, which are not the primary target, may be marginal and can ultimately destine them to mine waste. Further, mine waste can be a liability for the mining company or, at legacy mines, the taxpayer because of its effect on the landscape. The U.S. Geological Survey (USGS) has several initiatives to evaluate critical mineral resources in various types of waste. This factsheet highlights studies of mine waste carried out by USGS scientists at the Geology, Energy & Minerals Science Center in collaboration with other science centers funded through the USGS Mineral Resources Program. Recovery of critical minerals from mine waste can aid in remediation efforts and increase domestic supply of vital mineral resources.

Fact Sheet↗
USGS2026

Continental-scale prediction of hydrologic signatures and processes

Understanding how dominant hydrologic processes and their drivers vary across diverse continental-scale landscapes is critical for hydrologic modeling and water management applications. Our research addresses this question by synthesizing large-sample watershed datasets, Caravan and GAGES-II, and developing random forest models to identify patterns in hydrologic function. We assessed dominant processes by examining hydrologic signatures – summary indicators of watershed function derived from hydroclimatic time series and random forest models across 14 146 gauged United States watersheds. The results reveal clear continental-scale gradients in hydrologic processes, including baseflow, overland flow, storage, and water balance losses. Our map of dominant processes highlights, for example, the transition from baseflow to fast responses and back to baseflow along the elevation gradient from the Appalachian spine, through the Piedmont, to the Eastern Coastal Plain; a distinct outer ring around the Great Lakes region; and sharp contrasts between coastal and inland processes in the West. Variable importance analysis from random forest models show that processes in the western U.S. are primarily controlled by climate, whereas in the eastern U.S., soil, geology, and topography play larger roles, with distinct human influences apparent in urban areas. Our approach of estimating dominant processes and their drivers facilitates extending process knowledge from research watersheds to the continental scale, assessing current hydrological understanding, and evaluating hydrological model structures.

conterminous United States↗
USGS2024

Prioritizing US Geological Survey science on salinization and salinity in candidate and selected priority river basins

The US Geological Survey (USGS) is selecting and prioritizing basins, known as Integrated Water Science basins, for monitoring and intensive study. Previous efforts to aid in this selection process include a scientifically defensible and quantitative assessment of basins facing human-caused water resource challenges (Van Metre et al. in Environmental Monitoring and Assessment , 192(7), 458 2020). In the present work, we explore this ranking process based on water quality considerations, specifically salinity and salinization. We selected top candidate basins to study salinity and salinization issues in 18 hydrologic regions that include 163 candidate basins. Our prioritization is based on quantitative assessment of sources of salinity, drivers of change, and receptors that must respond to those sources and drivers. Source terms represented in the prioritization include geology, depth to brackish groundwater, stream conductivity, chloride in precipitation, urban and agricultural land use, application of road salt as a deicer, and irrigation. Drivers represented in prioritization include changes in chemical weathering as a result of changes in rainwater chemistry. Receptors include measures of water stress, measurements of stream ecological health, and socioeconomic factors. In addition, we present research activities for the USGS on salinity and salinization that can be pursued in these basins including assessment of sources, pathways, and loadings; predicting and understanding changes in sources, peaks, and trends; understanding the components of salinity and mobilization of contaminants; understanding the relationship between salinization and changing ecosystems; and developing knowledge on the causes and distribution of groundwater salinity, brackish water resources, and challenges related to desalination.

Enviornmental Monitoring and Assessment↗
USGS2024

A multidisciplinary approach that considers occurrence, geochemistry, bioavailability, and toxicity to prioritize critical minerals for environmental research

Critical minerals (or critical elements) are minerals or elements that are essential to global security and development and have supply chains vulnerable to disruption. In general, knowledge of the environmental behavior and health effects of critical elements is needed to support the development of safe and environmentally responsible supplies. This knowledge includes identifying potential consequences of increased critical element production and use, alternative critical element sources such as mine wastes, and adverse effects of critical elements on ecosystem condition and organismal health. Here we identify significant data gaps in the understanding of critical elements in surficial and aquatic environments, and the need, given the large number of commodities (50) identified on the 2022 critical minerals list for the United States, for an approach to prioritize them for study of their environmental fate and effects. We propose a multidisciplinary approach for this prioritization, considering measures of occurrence, geochemistry, bioavailability, and toxicity. We describe relatively easy-to-obtain metrics for each of these topic areas and demonstrate the utility of this integrated prioritization approach using indium and zinc as examples. This approach facilitates prioritizing research with a focus on those critical elements that are most mobile in the environment, bioavailable, toxic, or simply lacking data in these categories.

Environmental Science & Technology↗
USGS2026

High-resolution transboundary vegetation community maps of the Sonoran and Mojave Desert ecoregion to support critical landscape conservation planning and habitat management needs

We produced a 30-m resolution binational land cover map of Bird Conservation Region 33 (BCR 33) for the U.S. North American Bird Conservation Initiative. The region covers large portions of the Sonoran and Mojave Deserts. The map can support the U.S. Fish and Wildlife Service (FWS) Migratory Bird Program’s recovery planning efforts and constitutes the first known binational land cover dataset spanning sections of the United States–Mexico border and using a consistent classification system for both countries. The mapped region includes 152 distinct land cover classes, covering a total area of 38,421,453 ha (148,345 mi 2 ), of which 13,148,345 ha (52,706 mi 2 ) are located in Mexico and 24,770,640 ha (95,639 mi 2 ) in the United States. We primarily used Landsat 8 (OLI) imagery, supplemented by limited ground surveys from two field campaigns, drone-based aerial data, and existing vegetation classification frameworks from both countries. The classification applied a data-fusion approach integrating 30-m Landsat 8 imagery, decadal phenology metrics from vegetation indices, and a random forest model trained mainly with datasets from a comprehensive national mapping project from the U.S. Geological Survey (USGS) GAP Analysis Project (GAP) and federal wildland fire agencies’ Landscape Fire and Resource Management Planning Tools (LANDFIRE) (GAP/LANDFIRE) [United States side] and the National Institute of Statistics and Geography (INEGI) [Mexico side] as well as land cover maps and opportunistic open-access and field observations. Mapping of the full BCR 33 region was carried out in two phases: 1) Phase I, the prototype map, covered a smaller portion of the transboundary area and identified 31 land cover classes, and 2) Phase II, the full BCR 33 map (refer to Figure 1), which resulted in 152 land cover classes. Using a Random Forest classifier, we achieved an overall prediction accuracy of 92% for the Phase I map and 87% for the Phase II full region map. This slight decrease can be attributed to working on a larger, more complex area with a greater number of land cover classes. No formal validation was conducted, aside from using a subset of the collected field observations and training data to assess model performance during and after training. The training sites were further verified using Google Earth (Google, 2026) imagery. Two undergraduate students who worked for over a year visually inspected imagery and open access public images to confirm each training site during model training using in-house developed, online, visual tools. A portion of this field training data was reserved for model validation, and the corresponding results are to be presented in later sections. The project developed an end-to-end, medium- and fine-resolution remote sensing–based data fusion mapping approach. This effort produced a map (Nagler et al., 2025) and the online tools to support a dynamic, live, online map for visualizing the transboundary vegetation communities in BCR 33. The toolset is currently hosted by the University of Arizona (UofA) Vegetation Index and Phenology (VIP) Lab to support FWS partners (https://vip.arizona.edu/viplab_data_explorer?LCM_BCR33). The online map is designed to allow rapid updates using new training, validation, or correction data, making it dynamic and maintainable. The approach we took established a framework for rapid updating and correction of land cover maps, as the model can be quickly retrained with new field observations, updated training data, or other sources. This enables dynamic mapping and change detection of the region’s vegetation. This framework is an advance in data fusion and crowdsourced mapping of complex, vulnerable regions, providing support to regional stakeholders and the wider user community. This transboundary map can inform the protection, conservation, and restoration of vegetation, habitat, and ecosystems, particularly for threatened and endangered species across the two nations using consistent and harmonized binational mapping systems. Beyond supporting land management decisions and stakeholders in the transboundary desert ecoregions, this BCR 33 mapping effort establishes a foundation for future rapid, low-cost, cross-border land cover mapping that can benefit and advance ecosystem management.

Arizona, Baja California, California, Nevada, Sina↗
USGS2025

Water use across the conterminous United States, water years 2010–20

Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use. An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm 3 /mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm 3 /mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm 3 /mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm 3 /mo), respectively. Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.

conterminous United States↗
USGS2025

How do hydrological variability and human activities control the spatiotemporal changes of riverine nitrogen export in the Upper Mississippi River Basin?

Excessive nitrogen export from agricultural watersheds remains a critical water quality challenge, with the Upper Mississippi River Basin (UMRB) significantly contributing to downstream eutrophication and hypoxia in the Gulf. This study investigates the spatiotemporal dynamics of riverine nitrate plus nitrite (NO 3 – + NO 2 – -N) export across the UMRB at high spatial resolution (12-digit Hydrologic Unit Codes or HUC12 subwatershed scale) during 2001–2020 and quantifies the effects of anthropogenic activities and hydrological variability on riverine NO 3 – + NO 2 – -N export changes in the region between 2001–2005 and 2016–2020. Our results revealed hotspots of substantial increases in NO 3 – + NO 2 – -N yields across the UMRB, with distinct regional patterns in driving factors. Over the entire UMRB, NO 3 – + NO 2 – -N yields increased by 9.7 kg/ha/yr on average from 2001–2005 to 2016–2020, with anthropogenic activities contributing 4.8 kg/ha/yr and hydrological variability contributing 4.9 kg/ha/yr. The northern and western UMRB had combined influences from both anthropogenic activities and hydrological variability, while the east-central regions had predominantly hydrologically driven changes. Agricultural sources, including fertilizer, manure, and biological nitrogen fixation, collectively contributed over 80% of NO 3 – + NO 2 – -N loading throughout the basin. This framework for disentangling human and hydrological impacts provides critical insights for developing effective and targeted watershed management strategies to reduce nutrient losses and improve water quality.

Upper Mississippi River Basin↗
USGS2025

A probabilistic assessment methodology for the evaluation of geologic energy storage capacity—Natural gas storage in depleted hydrocarbon reservoirs

The need for energy storage, particularly underground, where capacity and duration may far exceed battery storage technologies, is especially relevant given the increasing demands for reliable power alongside the development of intermittent renewable electricity sources. Geologic energy storage facilities already exist, and expanded use would enable storing gases such as methane and hydrogen. In 2018, a National Academies of Sciences, Engineering, and Medicine report, “Future Directions for the U.S. Geological Survey's Energy Resources Program,” recommended that the U.S. Geological Survey (USGS) prioritize assessing underground energy storage in geologic formations in the United States. The U.S. Geological Survey has since developed a methodology for assessing natural gas storage capacities in depleted hydrocarbon reservoirs on a national scale. The methodology introduced in this report prescribes three approaches for calculating gas storage capacity. This methodology relies on the availability of input data, including cumulative hydrocarbon production records, reservoir petrophysical properties, and reservoir pressure data. Assessment inputs can be obtained from public, State-level databases and propriety national-scale databases, although the use of analogs could be warranted for estimating input parameters. Probabilistic assessment results are aggregated to play, petroleum province, regional, and national scales. The steps defined in this report are demonstrated on the Michigan Basin Province, which includes the Mississippian Sandstone Gas Play and the Clinton Structural Play. This methodology could be used to systematically and consistently assess hydrocarbon plays and provinces for natural gas storage capacity across the United States.

Michigan↗