USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geostandards and Geoanalytical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,660 records · Page 68Linked to original sources
USGS2024

Assessment of long-term changes in surface-water extent within Klamath Marsh, south-central Oregon, 1985–2021

The annual maximum extent of surface water in Klamath Marsh has naturally fluctuated in response to periods of wet and dry conditions in the surrounding basin. Field observations during the 2010s indicate that the annual maximum extent of surface water has been declining and the marsh is not responding to hydrologic inputs as it had historically. This report describes the results of a hydrologic evaluation of Klamath Marsh to characterize and understand multi-year declines in the surface-water extent and increased intermittency of streamflow exiting the marsh. Landsat imagery collected during 1985–2021 was processed to create a time series of annual maximum surface-water extent to assess changes in surface-water inundation within the marsh. A 50-percent decrease in the mean surface area of annual total open-water extent (TOWE) during the latter half of the study period (2003–21) compared to the first half (1985–2003) was observed in this 37-year time-series dataset. The change in open-water extent was offset by a corresponding increase in dry land in the marsh. Time series of streamflow, groundwater level, total annual precipitation, annual mean temperature, and anthropogenic water use and water management were compiled and evaluated to improve understanding of the factors affecting TOWE. Statistically significant downward trends in the regional groundwater table and streamflow into and out of the marsh were identified as well as statistically significant upward trends in annual mean temperature. Statistically significant correlations among TOWE, streamflow, and groundwater level also were identified. The decreasing trends could not be attributed to changes in total annual precipitation or changing anthropogenic groundwater use within the study area. Declines in the open-water extent of Klamath Marsh since 2000 principally are due to a decoupling of the groundwater and surface-water system beneath the marsh because of regional declines in groundwater level. Regional increases in air temperature and the reestablishment of more than 55,000 acres of forested land within the study area have likely contributed to increasing evapotranspiration, leaving less water available for groundwater recharge and stream base flow and resulting in basin-wide declines in streamflow and groundwater levels.

Oregon↗
USGS1976

Helium detection as a guide for uranium exploration

Helium, a byproduct of radioactive decay, may prove to be a valuable indicator of the presence and distribution of uranium deposits. Recent technological advances permit the development of instrumentation not previously adapted for this purpose. Commercially available equipment can provide high sensitivity at low cost and allow reasonable mobility for field use. A truck-mounted mass-spectrometer, tuned for helium-4, permits immediate adjustment or modification of sampling patterns in response to accumulating data. The inlet system of the spectrometer has been designed to allow flexibility in gas analyses from various sample types--soil gas, atmosphere, or gases in water. Sensitivity of the instrument is better than 50 parts of helium per 10 9 parts of gas. Replicate samples and standards can be analyzed in only 3 minutes. Helium in soil gas is being used for the initial evaluation of the technique. A hollow probe, as much as 2 m long, is driven into the ground; and a 10-cc syringe is used to purge the probe and extract the gas. This sample is then injected into the inlet system and introduced into the spectrometer at constant pressure. The output signal is displayed on a chart recorder. Investigations can be performed on a qualitative, relative basis, or on a quantitative basis by comparison to calibrated helium standards. Preliminary field testing includes studies of the responses to variations in wind speed, temperature, barometric pressure, moisture, and sampling depth over extended time periods, as well as studies of geologic controls on the helium content in soil gas. Surveys over known uranium occurrences reveal some anomalous helium distributions. This report describes an updated technological approach to an old idea: that of using helium, a byproduct of uranium radioactive decay, as an exploration tool for uranium. Helium is the sixth most abundant gas found in the earth's atmosphere (Table 1). It is an inert gas and very mobile, mixing rapidly. When the alpha particles from the radioactive decay of uranium and thorium pick up two electrons, atoms of the isotope helium-4 are formed. Several helium-4 atoms are produced from each decay series of U-238, U-235, and Th-232 (fig. 1). The half-lives of the parent isotopes are5also shown in figure 1. One gram of uranium will produce ~10 5 atoms of helium-4 per second, and one gram of thorium produces ~2.5 x 10 4 atoms of helium-4 per second (fig. 2). Calculations of the helium produced from the crust and mantle reveal that 1,125 x 10 30 atoms per year are produced, but only 7 x 10 30 atoms per year escape from the earth (Damon and Kulp, 1958). More is being produced than is being lost; in fact, the total atmospheric content of helium could be produced in only 2 million years (MacDonald, 1963)! However, all the crustal and mantle helium-4 does not degas into the atmosphere as it is formed. It is trapped in crystal lattices and in pore spaces within the earth. What this means is that there is excess helium-4 in the earth--excess, that is, compared to the atmospheric concentration in equilibrium with the helium-4 escape rate into space and the helium-4 flux from the crust and mantle (Nicolet, 1957). Near-surface pockets of high helium-4 concentrations are known, and some natural gas fields are so enriched that they are the source for commercial production of helium. Work by Roberts and others (1975) has shown high helium concentration in the soil gas associated with geothermal areas; and work by Clark and Kugler (1973), Dyck (1975), and Goldak (1974), for example, has noted high helium concentrations in soils and waters in the vicinity of uranium deposits. These latter studies certainly indicate the potential of helium detection for use as an exploration tool for uranium.

Open-File Report↗
USGS2025

From hydrated silica to quartz: Potential hydrothermal precipitates found in Jezero crater, Mars

On Earth, silica-rich phases from opal to quartz are important indicators and tracers of geological processes. Hydrated silica, such as opal, is a particularly good matrix for the preservation of molecular and macroscopic biosignatures. Cherts, a type of silica-dominated rocks, provide a unique archive of ancient terrestrial life while quartz is the emblematic mineral of the Earth's continental crust. On Mars, hydrated silica has been detected in several locations based on remote sensing and rover-based studies. In the present article we report on the detection of cobbles made of hydrated silica (opal or chalcedony), as well as well-crystallized quartz. These detections were made with the SuperCam instrument onboard Perseverance (Mars 2020 mission), using a combination of LIBS, infrared and Raman spectroscopy. Quartz-dominated stones are detected unambiguously for the first time on the Martian surface, and based on grain size and crystallinity are proposed to be of hydrothermal origin. Although these rocks were all found as float, we propose that these detections are part of a common hydrothermal system, and represent different depths / temperatures of precipitation. This attests that hydrothermal processes were active in and around Jezero crater, possibly triggered by the Jezero crater-forming impact. These silica-rich rocks, in particular opaline silica, are very promising targets for sampling and return to Earth given their high biosignature preservation potential.

Earth and Planetary Science Letters↗
USGS2025

Do Graviquakes exist?

The “Graviquake” model, proposed in 2015 as an alternative to the elastic dislocation model, posits that normal faults are passive features dominated by coseismic gravitational collapse into a dilated crustal wedge, and that normal faulting is fundamentally distinct from strike‐slip and reverse faulting. Developed using finite‐element modeling before the 2016 central Apennines earthquake sequence, the model was revamped based on interpreted Differential Interferometric Synthetic Aperture Radar data from these events and used as evidence for a gravitational collapse episode. However, this interpretation relies on miscalculated elevation changes and is not corroborated by independent geophysical and seismological observations. Our analysis exposes fundamental flaws in the Graviquake model. By assuming that faults are passive players, it underrepresents the dynamic role of strain accumulation and release in rocks adjacent to faults. The hypothesized rapid expulsion of overpressurized fluids appears inconsistent with observed diffusion rates and lacks supporting seismological evidence. Part of the uplifted–subsided volume imbalance is likely an artifact arising from data processing, and in part is a transient effect due to the delayed response of the lower crust. Moment tensor analyses detect no isotropic components indicative of gravitational collapse, and observed ground motion and stress‐drop levels remain fully consistent with elastic dislocation theory. In addition, finite‐element modeling of normal faulting replicates observed surface deformation without invoking a collapsing wedge. The Graviquake model proposes a representation of normal‐faulting mechanics that differs significantly from established models and observations. Gravity does play a role in normal faulting, but the elastic dislocation theory remains the definitive framework of fault mechanics. Reinterpreting the 2016 earthquakes as a cascade of gravitational episodes, based on incorrect data processing and modeling, fails to substantiate the Graviquake hypothesis. Persistence in advocating this model could mislead seismic hazard assessment and undermine our understanding of normal faulting.

Bulletin of the Seismological Society of America↗
USGS2025

Estimation of dynamic geologic CO2 storage resources in the Illinois Basin, including effects of brine extraction, anisotropy, and hydrogeologic heterogeneity

Since the vast majority of carbon dioxide (CO 2 ) storage resources in the United States are in deep saline aquifers, optimizing the use of these saline storage resources could be crucial for efficient development of geologic CO 2 storage (GCS) resources and basin- or larger-scale deployment of GCS in the country. Maximum CO 2 injection rates can be enhanced by extracting brine from the CO 2 storage unit. However, disposal of the extracted brine is both a technological and economic challenge. The lowest-cost option would likely be reinjection of the extracted brine into another formation above or below the CO 2 storage unit. Therefore, it is important to estimate brine injectivity as it will constrain the potential to increase CO 2 injectivity at an injection site that has access to multiple geologic storage units where either CO 2 or brine can be injected. Using a simulation-optimization framework, coupled with a non-isothermal, multiphase CO 2 -water-salt equation-of-state module, we developed a computationally efficient method for evaluating optimization of simultaneous CO 2 injection, brine extraction, and brine (re)injection at hypothetical injection sites deployed across a geologic basin. The Illinois basin is ideal for testing our methodology because it contains multiple geologic storage units with seals in between them to isolate injection of CO 2 in one unit from interfering with the injection of either brine or CO 2 in another unit above or below it. In addition, we investigated the relative effects of variation in key geologic parameters as well as two reservoir structures (hydrogeologic heterogeneity/anisotropy and homogeneity/isotropy) on CO 2 injectivities and enhancement of CO 2 injectivity through extracting brine. Results suggest that permeability, depth, and especially thickness of the storage unit could be the most influential parameters determining CO 2 injectivity. They also suggest that only injecting CO 2 into the storage unit with the greatest injectivity, enhancing that unit’s injectivity by extracting brine, and disposing of the produced brine in other suitable units could maximize total CO 2 injectivity in limited regions of the basin. At the majority of simulated injection sites, however, we found that injecting CO 2 into all of the accessible and suitable storage units was more likely to maximize the CO 2 storage resource.

Illinois, Kentucky, Indiana↗
USGS2025

Data gap analysis for estimation of agricultural return flows in the Upper Gunnison River Basin, Colorado

The Gunnison River and many tributaries in the Upper Gunnison River Basin provide water to irrigate agricultural crops. The application of irrigation water can recharge some aquifers locally by water percolating below the root zone and eventually flowing back to the stream or river through the subsurface. Diverting surface water for irrigation reduces streamflow during the irrigation season but can provide temporary storage of water and supplement streamflow after the snowmelt runoff season. Understanding the timing and quantity of agricultural return flows could help resource managers make informed decisions and adapt to potential changes in water management and availability that could affect irrigation practices. In 2024, the U.S. Geological Survey, in cooperation with the Upper Gunnison River Water Conservancy District, began a study to characterize agricultural return flows in the Upper Gunnison River Basin by using endmember mixing analysis and developing a groundwater model. Both approaches require data from multiple sources, but data gaps exist in the East River study reach and other reaches of interest (Ohio Creek, Tomichi Creek, and Cochetopa Creek). The East River Basin, which is the initial focus of the study, has fewer data gaps than the other basins. Data gaps could be addressed by installing additional surface water and groundwater monitoring sites, making regular streamflow measurements on tributaries, and completing tests to characterize local aquifer properties.

Colorado↗
USGS2025

Water use across the conterminous United States, water years 2010–20

Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use. An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm 3 /mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm 3 /mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm 3 /mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm 3 /mo), respectively. Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.

conterminous United States↗
USGS2025

Relationship of atmospheric nitrogen deposition to soil nitrogen cycling along an elevation gradient in the Colorado Front Range

Microbial processing of atmospheric nitrogen (N) deposition regulates the retention and mobilization of N in soils, with important implications for water quality. Understanding the links between N deposition, microbial communities, N transformations, and water quality is critical as N deposition shifts toward reduced N and remains persistently high in many regions. Here, we investigated these connections along an elevation transect in the Colorado Front Range. Although rates of N deposition and pools of extractable N increased down the elevation transect, soil microbial communities and N transformation rates did not follow clear elevational patterns. The subalpine microbial community was distinct, corresponding to a high C:N ratio and low pH, while the microbial communities at the lower elevation sites were all very similar. Net nitrification, mineralization, and nitrification potential rates were highest at the Plains (1,700 m) and Montane (2,527 m) sites, suggesting that these ecosystems mobilize N. In contrast, the net immobilization of N observed at the Foothills (1,978 m) and Subalpine (3,015 m) sites suggests that these ecosystems retain N deposition. The contrast in N transformation rates between the plains and foothills, both of which receive elevated N deposition, may be due to spatial heterogeneity not captured in this study and warrants further investigation. Stream N concentrations from the subalpine to the foothills were consistently low, indicating that these soils are currently able to process and retain N deposition, but this may be disrupted if drought, wildfire, or land-use change alter the ability of the soils to retain N.

Colorado↗
USGS2025

Multi-scale geophysical imaging of a hydrothermal system in Yellowstone National Park, USA

Little is known about the local plumbing systems that fuel Yellowstone’s famous hot springs, geysers and mud pots. A multi-method, multi-scale geophysical investigation was carried out in the Obsidian Pool Thermal Area (OPTA) to: (i) delineate the lateral extent of the hydrothermal area and associated surface features; (ii) estimate the dimensions of the upflow zone and identify its main controlling structures; (iii) assess fluids circulation pathways from depth to surface. Ground and airborne geophysical data were acquired to connect local and regional scales, from shallow to large depths. Maps of surface electrical resistivity show a strong correlation with hydrothermal features. At in-termediate depths, electrical resistivity permits delineating the upper limit of the upflow zone, while Poisson’s ratio highlights differences in subsurface fluid content. Combining these results with surface observations and topographic information, we speculate that differential mixing of hydrothermal and fresh water could explain the wide diversity of features observed at OPTA. Low electrical resistivity observed at large depths also suggest that a vast upflow zone, controlled by rhyolite flows and conjugate faults, underlies the OPTA. We speculate that hydrothermal fluids rise along fractures and reach the surface in topographic lows to form hydrothermal features. Our results show that synoptic, multi-scale geophysical measurements provide a roadmap for understanding where and how geologic heterogeneity, topography, fluid-gas separation, and the mixing of thermal and meteoric waters conspire to produce the wide variety of Yellowstone’s renowned hydrothermal features.

Wyoming↗
USGS2024

Geologic map of the southern Stillwater Range, Nevada

The southern Stillwater Range in west-central Nevada contains the western part of the Oligocene Stillwater-Clan Alpine caldera complex, which extends about 55 kilometers (km) east from the west side of the Stillwater Range to the northwestern Desatoya Mountains. The complex consists of at least seven nested ignimbrite calderas and subjacent plutonic rocks emplaced into a complex basement composed of Mesozoic metasedimentary and metavolcanic rocks and Cretaceous granitic plutons. The calderas formed during large-volume (100s to greater than (>) 2,500 cubic kilometers [km 3 ]) eruptions of silicic ignimbrites between about 30.4 and 25.1 million years before present (Ma). The Job Canyon and Poco Canyon calderas and the western part of the much larger Elevenmile Canyon caldera, and their plutonic roots, are exposed in the southern Stillwater Range. There, the caldera complex was steeply tilted during large-magnitude crustal extension in the middle Miocene, and further exhumed during the late Miocene to Holocene Basin and Range extension that formed the modern Stillwater Range. This tilted crustal section affords an exceptional opportunity to view structural cross sections of ignimbrite calderas and their plutonic roots to paleodepths as much as 9–10 km.

Nevada↗
USGS2025

Regional characterization of coal resources in the U.S. Gulf Coast

There is increasing interest in extracting critical minerals (CM), including rare earth elements (REE), from coals in the United States to address the overreliance on imported REE. The U.S. Gulf Coast and the Williston basins are the two major lignite-bearing basins within the country. Recent REE and CM studies of the lignite in these basins have indicated that the coals may be a viable source material for REE and CM extraction. To evaluate in-place coal as a potential source of REE and CM, the coal resources need to be quantified. This study presents the results of a regional analysis of the U.S. Gulf Coast lignite and bituminous coal resources that might be available as potential sources of REE and CM. The resource analysis used kriging methods to develop isopleth maps of cumulative coal thickness throughout the region using data from 31,181 drill holes and other data points. The estimated total coal resource in the Gulf Coast is about 83 billion metric tons in the upper 90 m (~ 300 ft) of the subsurface. Texas accounted for 40 percent (32 billion metric tons) of the total resource, followed by Mississippi (24 %, 20 billion metric tons), Louisiana (14 %, 12 billion metric tons), Tennessee (10 %, 8.5 billion metric tons), and Arkansas (6 %, 5.1 billion metric tons). The remaining states each accounted for less than 5 percent of the total resource. Georgia had the smallest resource estimated at 7 million metric tons. Here we report the first known state-wide lignite resource estimates for Georgia, Kentucky (820 million metric tons), and Missouri (1,800 million metric tons). A comparison of the results of this study with those of previous Gulf Coast and Williston Basin resource studies is difficult because each study used different data sources, assessment methodologies, overburden depths, and qualifying coal thicknesses. Coal-power electric generation has sharply decreased in past decades and mining of these coals for CM and REE could provide additional co-products such as activated carbon and other uses such as fertilizer (soil enhancer).

EarthArXiv↗
USGS2025

Simulation of the impacts of projected climate change on groundwater resources in the urban, semiarid Yucaipa Valley watershed, southern California using an integrated hydrologic model

Managing water resources in semiarid watersheds is challenging due to limited supply and uncertain future climate conditions. This paper examines the impact of future climate changes on an urban watershed in southern California using an integrated hydrologic model. GSFLOW modeling software is used to simulate the nonlinear relationships between climate trends and precipitation partitioning into ET, runoff, and subsurface storage. Four global circulation models (GCMs), each with two greenhouse-gas scenarios, RCP45 and RCP85 are used to project future climate conditions. GCMs include the CanESM2, CNRM-CM5, HadGEM2-ES, and MIROC5 models. The model's simulated hydrologic conditions are compared with historical data to assess changes in water budgets and groundwater supply. Results indicate decreased groundwater storage in most scenarios due to increased natural evapotranspiration, vegetation consumptive use, and streamflow out of the watershed. Only scenarios with substantially increased future precipitation show increased groundwater storage. The study also highlights increased future aridity despite the rise in precipitation and large precipitation events forecast by GCMs, which increase the risk of urban floods and decrease stream leakage and water available to vegetation.

California↗
USGS2025

Gaps in water quality modeling of hydrologic systems

This review assesses gaps in water quality modeling, emphasizing opportunities to improve next-generation models that are essential for managing water quality and are integral to meeting goals of scientific and management agencies. In particular, this paper identifies gaps in water quality modeling capabilities that, if addressed, could support assessments, projections, and evaluations of management alternatives to support ecosystem health and human beneficial use of water resources. It covers surface water and groundwater quality modeling, dealing with a broad suite of physical, biogeochemical, and anthropogenic drivers. Modeling capabilities for six constituents (or constituent categories) are explored: water temperature, salinity, nutrients, sediment, geogenic constituents, and contaminants of emerging concern. Each constituent was followed through the coupled atmospheric-hydrologic-human system, with prominent modeling gaps described for a diverse array of relevant inputs, processes, and human activities. Commonly identified modeling gaps primarily fall under three types: (1) model gaps, (2) data gaps, and (3) process understanding gaps. In addition to potential solutions for addressing specific individual modeling limitations, some broad approaches (e.g., enhanced data collection and compilation, machine learning, reduced-complexity modeling) are discussed as ways forward for tackling multiple gaps. This gap analysis establishes a framework of diverse approaches that may support improved process representation, scale, and accuracy of models for a wide range of water quality issues.

Water↗
USGS2026

Site-specific amplifications in Northwestern Turkiye: A generic approach

In this study, we derive generic site amplification functions applicable to Northwestern Türkiye and follow guidance on site classifications established by the United States National Earthquake Hazards Reduction Program (NEHRP). We employ the one-dimensional (1-D) equivalent linear ground response analysis method and focus on recordings from a select suite of free-field strong motion (SM) stations. These particular SM stations are associated with a comprehensive geotechnical site conditions dataset comprising 76 shear-wave velocity profiles. Despite their varying resolutions and depths, this diversity allows for a more representative analysis across different site conditions, enhancing the robustness of our findings. For analyses, we utilize a robust set of global ground motion records, selected from both within and outside of Türkiye, to serve as strong and weak input bedrock motions. Site amplification is determined by propagating these bedrock records through 76 site-specific Afet ve Acil Durum Yönetimi Başkanlığı (AFAD) station profiles and calculating the spectral acceleration ratio between the ground surface and the input motion. Our analyses reveal substantial disparities between the amplification functions derived from 1-D site response analyses using strong and weak input motions. These disparities are central to our analysis and inform the subsequent comparison with site amplification functions reported in the literature. We compare the generic site amplification functions derived in this study with those reported in the literature for regions with similar geological and seismic conditions to Northwestern Türkiye. For example, site amplification functions for NEHRP Site Classes C and D have been documented for Greece and the United States utilizing frequency-dependent methods such as the quarter-wavelength approximation. Our findings reveal that the generic site amplification functions derived in this study exhibit differences in peak amplitudes and predominant frequencies compared to those in the literature, reflecting regional variations in geotechnical and seismic properties. This study represents an initial effort to formulate generic site amplification functions for Türkiye, with a particular emphasis on the Northwestern region. A thorough literature review indicated no prior studies have proposed such functions specifically for this area.

Northwestern Turkiye↗
USGS2026

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California↗
USGS2025

Paleoproterozoic vein graphite mineralization caused by decarbonation in the Ruby Range, Montana, USA

Hydrothermal graphite veins are a possible source for modern battery materials and require better understanding of their carbon source(s) and absolute timing to develop mapable criteria for exploration models. We present new observations of graphite vein and alteration paragenesis and U-Pb LA-ICP-MS titanite age data from the Ruby prospect, Montana, USA, that constrain mineralization timing and source. The graphite veins cut high-temperature metamorphic rocks of the lower Christensen Range suite and are associated with intense diopside (Di0.69Hd0.27Jo0.04) alteration of marble. The oldest titanite ages in fresh marble and partially altered calc-silicate gneiss are ca. 2,500 – 2,450 Ma, show elevated REE values, and Eu/Eu* <1.5, consistent with growth during early regional metamorphism. Titanite in diopside-graphite alteration, interpreted as part of the hydrothermal vein-forming episode, cluster around 1,750 Ma, are characterized by lower REE values, and show Eu/Eu* >2; suggesting a low fO 2 fluid generated from metamorphism during the Big Sky orogeny. Our paragenetic observations and titanite ages indicate graphite vein formation via skarnoid decarbonation reactions in marble late in regional orogenesis. Granulite-facies, carbonate-bearing, supracrustal rock terranes are thus favorable for hydrothermal graphite vein deposits.

Montana↗
USGS2026

Increasing artificial light at night enhances salmonid predator foraging efficiency in an urbanized lake

Artificial light at night (ALAN) poses a threat to ecosystems globally. It includes both direct and indirect light, or skyglow, which occurs when ALAN scatters in the atmosphere, extending beyond its original source. We analyzed ALAN trends in Lake Washington, WA, from 2014 to 2023 using Visible Infrared Imaging Radiometer Suite (VIIRS) nighttime light measurements, evaluated the relationship between in situ and satellite measurements, and modeled predator search volumes for a juvenile salmon predator, cutthroat trout ( Oncorhynchus clarki ), as a function of ambient light and turbidity conditions. Open water regions experienced significant increases in ALAN, while nearshore areas primarily showed no or negative trends, revealing the role of skyglow in shaping open water light environments. Using a visual foraging model for cutthroat trout, we found that juvenile salmon at the shallow southern pelagic site experienced light 28 times brighter, resulting in a 168% greater predation vulnerability than those at the northern site. In the Ship Canal, a narrow corridor for outmigrating salmon, predator search volumes were 249% higher than at the southern site. These contrasts in predation vulnerability demonstrate how local conditions influence predator–prey dynamics and provide critical insight for targeting mitigation of both nearshore and distant light sources.

Washington↗
USGS2025

Refining the earthquake history of south-central Alaska through lake records

The Alaska–Aleutian subduction zone (AASZ) is one of the world's most seismically active plate boundaries and the source of the 1964 M w 9.2 Great Alaska earthquake–the second largest instrumentally recorded earthquake in the world. Understanding the nature and frequency of such earthquakes is necessary for seismic and tsunami hazard assessment, but instrumental and historical records that span less than 150 years are too short to allow a statistically reliable analysis of earthquake recurrence times. This calls for studies of evidence of past earthquakes, extending the earthquake catalog further back in time. Subduction-zone paleoseismology in south-central Alaska is predominantly based on coastal evidence of land-level changes and tsunamis generated by megathrust earthquakes and preserved in the geological record. A complementary approach is lacustrine paleoseismology, which is still a relatively young discipline in Alaska. However, globally, lake basins are well-established high-resolution and continuous recorders of paleoseismic activity along subduction zones, relying on the identification of underwater landslide deposits and turbidites generated by seismic shaking. As a result, lake basins not only register ground shaking from megathrust earthquakes, but also from intraslab and crustal earthquakes, which are typically not accompanied by significant land-level changes. In this review paper, we combine coastal and lacustrine paleoseismology approaches to refine the south-central Alaskan earthquake history by comparing the paleoseismic records from two lakes (i.e., Eklutna Lake, located in the Chugach Mountain Range, and Skilak Lake, situated on the Kenai Peninsula) with the coastal and crustal earthquake catalog in Alaska. The resulting age ranges of all known megathrust earthquakes involving the Alaskan megathrust between the Kodiak and Prince William Sound (PWS) sections are more precise and accurate for the last 1.3 kyrs BP than the previously published age ranges from coastal records. As a result, this study supports the following key conclusions: (1) The 1964 CE earthquake was an exceptionally strong and unique event in the last 2000 years, rupturing the PWS, Kenai, Barren Islands, and Kodiak sections simultaneously. (2) The high-resolution and seasonal markings of the varved lake records now disentangle for the first time closely timed earthquakes, which was not possible based on the coastal evidence alone. (3) No persistent megathrust rupture boundaries exist. So, the possibility of a full rupture of the entire eastern AASZ, from PWS to Semidi cannot be excluded. (4) The rupture pattern in the eastern AASZ reveals superimposed cycles of multi-asperity ruptures (1964 earthquake) and clustered complementary partial ruptures, or rupture cascades. (5) The PWS section hosts the largest asperity in the eastern AASZ. (6) The shaking record of megathrust earthquakes indicates a time-dependent (quasiperiodic) behavior for the study area, but the observation of complementary clusters means that the hazards will not drop to zero but instead may even increase for a neighboring section. (7) The time-independent behavior of intraplate earthquakes implies that the intraslab hazard did not decrease following the 2016 and 2018 earthquakes. This study utilizes an integrated approach for subduction zone paleoseismology as a solution for unraveling recurrence and rupture patterns in Alaska, which can be applied worldwide.

Alaska↗