USGS Science⌕ Search

SEARCH · USGS Science

Results for “Frontiers in Veterinary Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,605 records · Page 68Linked to original sources
USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗
USGS2026

Effect of mineral deposit data on predictions from the three-part approach to quantitative mineral resource assessment—A study of 16 previous U.S. Geological Survey assessments

The three-part approach to quantitative mineral resource assessment requires information about the properties of undiscovered mineral deposits in an assessment area. These properties are unknown, so the properties of discovered mineral deposits of the same mineral deposit type are used instead. In the three-part approach, these discovered mineral deposits come from around the world, and their properties constitute the pooled data for that mineral deposit type. Alternatively, these discovered mineral deposits could come from the assessment area, and their properties constitute the tract data for that mineral deposit type. Tract data may be more representative of the undiscovered mineral deposits in the assessment area than the pooled data. The goal of this study was to determine whether resource predictions using pooled data are equivalent to resource predictions using tract data. To this end, 16 previous U.S Geological Survey assessments were studied. For each assessment, resources were predicted for one undiscovered mineral deposit in the assessment area. One set of predictions used pooled data, and another used tract data. The two sets of predictions were compared with an equivalence test, using the six assessment statistics that are commonly reported for mineral resource assessments. Practical equivalence is the condition that two corresponding assessment statistics are within a factor of 1.5 of one another. For each of 2 assessments, all 6 assessment statistics were practically equivalent. For both assessments, the assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 1.30 times smaller to 1.03 times larger. For each of 14 assessments, 1 or more of the 6 assessment statistics were not practically equivalent. The assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 26.6 times smaller to 5.53 times larger. The use of pooled data has been a standard procedure in the three-part approach since at least 1986. The 16 assessments in this study are not a representative sample of those prior assessments that used pooled data. So, it is inappropriate to use the study results to infer whether pooled data affected the resource predictions for those prior assessments.

Scientific Investigations Report↗
USGS2026

Geochemical, mineralogical, and isotopic evidence for multi-stage genesis of the Hicks Dome REE + Y-HFSE-fluorite deposit, Illinois, USA

Hicks Dome hosts breccias enriched in rare earth elements (REE), Y, Th, F, Ba, Ti, Nb, and Be, alongside spatially associated lamprophyre dikes (ca. 271 Ma). Hicks Dome is located within the Illinois–Kentucky Fluorspar District, which hosts fluorite, Pb–Zn, and barite resources. This study investigates the genetic relationships between Hicks Dome mineralization in breccias, alkaline magmatism, and Illinois–Kentucky Fluorspar District mineralization. Lamprophyre dikes are light REE–enriched with chondrite-normalized abundances decreasing from La to Lu. The Host Breccia exhibits middle and heavy REE–enriched patterns that mirror those of the principal REE–Th host minerals, including fluorapatite, xenotime, and thorite. Textural evidence suggests recrystallization of phosphates, sulfates, and Ti–Nb oxides in the Host Breccia. U–Pb geochronology constrains multiple mineralizing events, with ages of 277 ± 18 Ma from low-Th apatite interpreted as main-stage mineralization, and 121.6 ± 9.7 Ma from high-Th apatite indicating later overprinting. O–H–C stable isotope data provide evidence for multiple stages of fluid-rock interaction and fluid mixing: (1) early magmatic fluids dissolved limestone country rock, (2) mixing between magmatic fluids and basinal brines led to main-stage mineralization in the Host Breccia, and (3) late-stage mineralization occurred following mixing of meteoric water and basinal brine. These results indicate that heavy REEs, high field strength elements, and fluorine precipitated proximal to its alkaline magmatic source because of fluid–rock interactions and fluid mixing. Subsequent fluid mixing drove late-stage recrystallization and additional fluorite formation, a process that may be similar to mineralization in the Illinois-Kentucky Fluorspar District.

Illinois↗
USGS2017

Field-trip guide to Mount Hood, Oregon, highlighting eruptive history and hazards

This guidebook describes stops of interest for a geological field trip around Mount Hood volcano. It was developed for the 2017 International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly in Portland, Oregon. The intent of this guidebook and accompanying contributions is to provide an overview of Mount Hood, including its chief geologic processes, magmatic system, eruptive history, local tectonics, and hazards, by visiting a variety of readily accessible localities. We also describe coeval, largely monogenetic, volcanoes in the region. Accompanying the field-trip guidebook are separately authored contributions that discuss in detail the Mount Hood magmatic system and its products and behavior (Kent and Koleszar, this volume); Mount Hood earthquakes and their relation to regional tectonics and the volcanic system (Thelen and Moran, this volume); and young surface faults cutting the broader Mount Hood area whose extent has come to light after acquisition of regional light detection and ranging coverage (Madin and others, this volume). The trip makes an approximately 175-mile (280-kilometer) clockwise loop around Mount Hood, starting and ending in Portland. The route heads east on Interstate 84 through the Columbia River Gorge National Scenic Area. The guidebook points out only a few conspicuous features of note in the gorge, but many other guides to the gorge are available. The route continues south on the Mount Hood National Scenic Byway on Oregon Route 35 following Hood River, and returns to Portland on U.S. Highway 26 following Sandy River. The route traverses rocks as old as the early Miocene Eagle Creek Formation and overlying Columbia River Basalt Group of middle Miocene age, but chiefly lava flows and clastic products of arc volcanism of late Miocene to Holocene age.

Oregon↗
USGS2025

International data gaps at the Center for Engineering Strong Motion Data

The Center for Engineering Strong Motion Data (CESMD) is utilized by seismologists, engineers, and disaster management professionals in the US and has historically achieved and distributed waveforms from across the globe for significant earthquakes. The increased access to the waveforms via Web API (Application Programming Interface) offers a unique opportunity to provide the community complete datasets, sampling a variety of tectonic environments and geologic conditions, increasing the number of available ground motion records for use in ground motion models (GMMs) and improving the accuracy of earthquake engineering evaluations. The objective of this study is to programmatically identify gaps in global event data from the past decade and backfill missing data gaps at CESMD. We first compare the CESMD catalog with the Advanced National Seismic System (ANSS) Comprehensive Earthquake Catalog identifying regions and time periods where strong-motion data is limited or inadequate. To backfill datasets at CESMD for significant events, we pinpoint regions and time intervals that lack information, creating a list of events for which we’d like to obtain data. An important facet of this work is identifying the source of data and metadata across earthquake repositories around the world and integrating these data repositories into our current strong-motion data processing workflow. In parallel with these newly processed datasets, we are developing a script to produce data origination citations to include provenance and attribution information to associate with respective datasets at CESMD. We showcase our methodology for identifying and filling data gaps at CESMD using three case studies (the 2018 Anchorage Alaska earthquake sequence, seismicity associated with the 2018 Hawaiian Kilauea volcano eruption, and several earthquakes in Turkey) and then outline our strategy to apply our data gap backfilling methods on an international scale.

Conference Paper↗
USGS2025

Oligocene–Miocene development and evolution of the south Dome Rock Mountains basin, lower Colorado River corridor, Arizona, USA

Sedimentary basins in the Colorado River extensional corridor record large-magnitude Basin and Range extension and younger dextral shear deformation in the evolving Pacific−North America plate boundary. The south Dome Rock Mountains basin is located in west-central Arizona (USA), where the history of basin evolution, style of deformation, and timing of the transition between extension and dextral shear are not well constrained. We integrate new geologic mapping of the south Dome Rock Mountains basin with zircon U-Pb geochronology of six marker beds to characterize the timing of basin evolution and the slip history of the south Dome Rock Mountains normal fault. Structural analysis defines structures consistent with regional extension and younger dextral shear deformation. We use sedimentological and petrological analysis to interpret the depositional environments of three basin sequences. A lower basin sequence consists of fluvial strata deposited in an internally drained intermontane basin from ca. 35 Ma to 24.4 Ma. A sequence of volcanic rocks was emplaced in the basin between 24.4 Ma and 23.3 Ma, before the onset of local extensional faulting. An upper basin sequence of coarse conglomerate and sedimentary breccia was deposited on the hanging wall of a half graben structure after 23.3 Ma and through ca. 12.8 Ma, synchronous with 3−7 km of dip slip on the west-dipping, listric south Dome Rock Mountains fault. The basin was subsequently deformed by dextral shear after 12.8 Ma and before 4.8 Ma. These results document how distributed deformation related to the evolving Pacific−North America plate boundary occurred >100 km from the primary plate boundary.

Arizona, California↗
USGS2025

James Buttle review: The characteristics of baseflow resilience across diverse ecohydrological terrains

The dynamic storage of aquifers is the portion of groundwater that can potentially drain to any given point along a stream to create baseflow. Baseflow typically occurs year-round in perennial streams, though the characteristics and stability of dynamic storage are often most important to instream processes during extended dry periods (without precipitation and snowmelt) when runoff and quickflows are minimised. The term ‘baseflow resilience’ is defined for this review as the tendency of baseflow in streams to maintain a consistent volume and water quality year to year while under stress from climate variability and extremes, along with anthropogenic stressors such as water withdrawals, land use change, and water quality degradation. ‘Baseflow resilience’ has, in part, a user-defined meaning spanning water supply and water quality variables of primary interest. Watershed characteristics that directly impact resilience can often produce non-intuitive feedbacks that enhance some attributes of baseflow while simultaneously impairing others. For example, permeable stream corridor geology creates strong stream-groundwater hydrologic connectivity, yet fast groundwater drainage via preferential high-permeability flowpaths can lead to streamflow not being sustained during extended dry periods. Also, shallow groundwater sources are generally more immediately vulnerable to extreme events, warming, salinization, transpiration, and precipitation drought, compared to deeper groundwater. Yet baseflow drought in streams influenced by deeper groundwater can lag precipitation drought by years, and contaminant legacies may propagate through deep groundwater flowpaths to receiving waters for decades to centuries. Finally, irrigation withdrawals can intercept groundwater that would have drained to streams, and the application of irrigation may leach contaminants from the soil zone by unnaturally raising water tables, yet irrigation return flows can sustain baseflow and groundwater-dependent habitats in semiarid areas. This review covers the concept of hydrologic resilience in the context of stream baseflow processes and summarises the common hydrogeological controls on, and multiscale stressors of, dynamic groundwater storage. Further, we present several quantitative metrics to assess a range of water supply to water quality baseflow characteristics using both broadly available and boutique data types, a subset of which are demonstrated using data from the Delaware River Basin, USA.

Delaware River Basin↗
USGS2024

The new self-anchored suspension (SAS) San Francisco Bay Bridge- Its response to a small earthquake

This paper presents a summary of previously published work (Celebi 2023) related to the new Self-Anchored Suspension (SAS) bridge that went into service within the last decade as a replacement for the older truss bridge spanning between Yerba Buena Island and Oakland, California, within the San Francisco Bay Area. During the October 19, 1989 M6.9 Loma Prieta earthquake, which occurred ~100 km south of the Bay Bridge, a section of the upper deck of the truss bridge fell onto the lower deck – thus closing this important lifeline between San Francisco and Oakland. The SAS is unique, self-anchored, and suspended by a single tower that is pivotal in trafficking the cable and hanger system to support the decks. The SAS bridge is extensively instrumented by the California Geological Survey’s Strong Motion Instrumentation Program (CSMIP). There are approximately 85 channels of accelerometers in the seismic monitoring system that recorded the October 14, 2019 Mw4.6 Pleasant Hill earthquake. The data allow a complex but identifiable coupled response of the deck, tower, and cable system. Both acceleration and displacement time-history data are used to extract significant frequencies using system identification methods, including spectral analyses. Results are compared to those from finite-element-model (FEM) analyses carried out during the design and analysis process of the bridge in 2002 (Nader et al. 2002). There are differences between FEM analyses results and those from the low amplitude shaking caused by a seismic event. An apparent frequency (period) of the SAS bridge is assessed (approximately 5.2 seconds). In a plot of deck length versus period, there is an almost linear relationship with periods of other regular suspension bridges, such as the Golden Gate Bridge and the Carquinez Bridge, both in the San Francisco Bay.

California↗
USGS2025

Identification of representative earthquakes for probabilistic tsunami hazard analysis (PTHA) using earthquake rupture forecasts and machine learning

As probabilistic tsunami hazard analysis (PTHA) focuses more on assessments for localized, populous regions, techniques are needed to identify a subsample of representative earthquake ruptures to make the computational requirements for producing high-resolution hazard maps tractable. Moreover, the greatest epistemic uncertainty in seismic PTHA is related to source characterization, which is often poorly defined and subjective. We address these two salient issues by applying streamlined earthquake rupture forecasts (ERFs), based on combinatorial optimization methods, to an unsupervised machine learning workflow for identifying representative ruptures. ERFs determine the optimal distribution of a millennia-scale sample of earthquakes by inverting the observed slip rate on major faults. We use two previously developed combinatorial optimization ERFs, integer programming and greedy sequential, to produce the optimal location of ruptures with seismic moments sampled from a regional Gutenberg–Richter magnitude–frequency distribution. These ruptures in turn are used to calculate peak nearshore tsunami amplitude, using computationally efficient tsunami Green's functions. An unsupervised machine learning workflow is then used to identify a small subsample of the earthquakes input to ERFs for onshore PTHA analysis. We eliminate epistemic uncertainty related to source distribution under traditional PTHA analysis; in its place, a quantifiable, less subjective and generally smaller uncertainty related to the input to ERFs is included. The Nankai subduction zone is used as a test case, where previous ERFs have been conducted. Results indicate that the locations of representative earthquakes are sensitive to choice of magnitude–area relation and to whether a minimum cumulative stress objective is imposed on the fault. In general, incorporating ERFs into PTHA provide a physically self-consistent method to incorporate fault slip information in determining representative earthquakes for onshore PTHA, eliminating a major source of epistemic uncertainty.

Nankai subduction zone↗
USGS2025

Microbial ecology of permafrost soils: Populations, processes, and perspectives

Permafrost microbial research has flourished in the past decades, due in part to improvements in sampling and molecular techniques, but also the increased focus on the permafrost greenhouse gas feedback to climate change and other ecological processes in high latitude and alpine permafrost soils. Permafrost microorganisms are adapted to these extreme environments and remain active at low temperatures and when resources are limited. They are also an important component of global elemental cycles as they regulate organic matter turnover and greenhouse gas production, particularly as permafrost thaws. Here we review the permafrost microbiology literature coupled with an exploration of its historical aspects, with a particular focus on a new understanding advanced by molecular biology techniques. We further identify knowledge gaps and ways forward to improve our understanding of microbial contributions to ecosystem biogeochemistry of permafrost-affected systems.

Permafrost and Periglacial Processes↗
USGS2024

Correlation analysis of groundwater and hydrologic data, Kaloko-Honokōhau National Historical Park, Hawai‘i

Designated in 1978, Kaloko-Honokōhau National Historical Park is located on the west coast of the Island of Hawaiʻi. The Kaloko-Honokōhau National Historical Park encompasses about 1,200 acres of coastal land and nearshore ecosystems, which include wetlands, anchialine pools (landlocked bodies of brackish water with hydrologic connections to the ocean), fishponds, a fishtrap, and coral reefs. These nearshore ecosystems are dependent on groundwater discharge with a freshwater component and provide habitat for threatened and endangered, endemic species, such as the orangeblack Hawaiian damselfly ( Megalagrion xanthomelas ) and the Hawaiian coot (ʻAlae keʻokeʻo, Fulica alai ). The populations of these native species, however, are threatened because of habitat loss related to urban development and environmental changes. Kaloko-Honokōhau National Historical Park is within the Keauhou aquifer system and the North Kona District, which experienced a 52 percent resident-population increase between 2000 and 2020 and a 41 percent visitor increase between 2008 and 2019. To support the current water demand associated with this growing population, groundwater is the primary source of freshwater used in the North Kona District, with about 15 million gallons of groundwater withdrawn from the Keauhou aquifer system per day since 2009. With anticipated development, future (2015–35) groundwater withdrawal from the Keauhou aquifer system is projected to be about 55 percent greater than recent (2012–14) withdrawal. Because Kaloko-Honokōhau National Historical Park is located within a coastal aquifer, natural and human-induced changes can affect the quality and quantity of groundwater, which can threaten groundwater-dependent ecosystems. To improve understanding of recent groundwater conditions, the U.S. Geological Survey, in cooperation with the National Park Service, undertook this study to document correlations between hydrologic time-series datasets from sites in and near Kaloko-Honokōhau National Historical Park using the nonparametric (distribution-free) Kendall’s tau statistical test. For the statistical analyses, dependent variables representing the groundwater system include groundwater level, the groundwater-level difference between pairs of sites, and specific conductance, and independent variables include datasets of sea level, rainfall, and groundwater withdrawal. About 34 percent of the 140 non-time-lagged Kendall’s tau statistical tests evaluated in this report are statistically significant ( p -value ≤ 0.050) with generally weak (0.1 ≤ tau ≤ 0.2) to moderate (0.2 ≤ tau ≤ 0.3) correlations. Groundwater levels measured at monitoring sites have the strongest correlation with the multivariate El Niño–Southern Oscillation index and withdrawal from production wells at the nearby Kohanaiki Private Club Community. Specific conductance is not consistently and significantly correlated with the independent hydrologic variables investigated in this report. Because the relations between hydrologic variables are commonly not instantaneous, a second set of correlations was evaluated after applying a range of time lags to the independent variable datasets. Relative to the non-time-lagged case (the set of correlations that did not use time-lagged independent variables), some of the time-lagged independent variables improved correlations with some of the dependent variables. For a particular independent variable, similar time lags were expected between the independent variable and dependent variable at all four monitoring sites. However, different time lags among the four sites sometimes produced the strongest correlations. This study identified several correlations that are statistically significant and hydrologically plausible, but the correlations could indicate that multiple concurrent factors are controlling the observed groundwater-system response, which might be better addressed using multivariate analyses. This study only investigates bivariate correlations, which may not explain all the variance in the data. The correlations analyzed in this report are limited by the quantity of available hydrologic data in the area near Kaloko-Honokōhau National Historical Park and are based on 14 years of time-series data, which were aggregated to a relatively coarse monthly temporal resolution that represents the minimum resolution common to all datasets.

Hawaii↗
USGS2010

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Effective communication in the geosciences requires consistent uses of stratigraphic nomenclature, especially divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and is calibrated in years. Over the years, the development of new dating methods and the refinement of previous methods have stimulated revisions to geologic time scales. Advances in stratigraphy and geochronology require that any time scale be periodically updated. Therefore, Divisions of Geologic Time, which shows the major chronostratigraphic (position) and geochronologic (time) units, is intended to be a dynamic resource that will be modified to include accepted changes of unit names and boundary age estimates. This fact sheet is a modification of USGS Fact Sheet 2007-3015 by the U.S. Geological Survey Geologic Names Committee.

Fact Sheet↗
USGS2026

Rapid earthquake magnitude classification via P-wave strains from borehole strainmeters and Distributed Acoustic Sensing

Distributed Acoustic Sensing (DAS) offers a promising approach for earthquake early warning (EEW) in settings where seismic networks are costly to maintain. By repurposing fiber-optic cables as dense strainmeter arrays, DAS enables real-time earthquake detection wherever those fibers are accessible. However, poor azimuthal coverage and challenges in estimating magnitude from strain measurements remain key hurdles in applying for earthquake monitoring. Here, we develop a machine learning method to distinguish large (M≥5.4) earthquakes from smaller ones within the first 4 seconds of a strain waveform after a P-wave arrival without determining location. Using ensemble decision tree models trained on borehole strainmeter data (3.5≤M≤7.1) and tested on onshore DAS waveforms (including the 2024 M7 Offshore Cape Mendocino earthquake), we find that low-frequency (0.2–0.5 Hz) continuous wavelet transform coefficients are the strongest predictors of magnitude, in addition to strain amplitude. Both DAS and borehole strainmeters effectively capture long-period strain signals, making these findings valuable for EEW systems. Our method shows high precision compared to the real-time EEW system, ShakeAlert®, supporting the position that DAS is a viable technology for earthquake monitoring and magnitude classification.

California↗
USGS2026

Global pegmatite-hosted lithium, cesium, and rubidium resources: A dataset for grade and tonnage modeling

Quantitative mineral resource assessments of potential undiscovered deposits can inform future mineral supply scenarios, but their accuracy is conditional on building robust grade and tonnage models of known deposits. This study presents an up-to-date global compilation and analysis of recently discovered and original, in-situ pegmatite-hosted Li, Cs, and Rb resources prior to historic production. Our analysis yields a median tonnage of 21.2 million tons (Mt) and grade of 1.12% Li 2 O, respectively, for global Li pegmatite deposits ( n = 73). The grades and tonnages of Li pegmatite resources vary depending on the age of the bedrock host domain, pegmatite crystallization age, and primary ore mineralogy. Lithium pegmatite resources hosted in Archean to transitional Archean-Paleoproterozoic domains have the largest median tonnage (29.8 Mt; n = 38), and those hosted in Paleoproterozoic to Mesoproterozoic domains have smaller median tonnages (6.5 Mt; n = 16). Cesium deposits where pollucite is the primary ore mineral have a bimodal grade distribution, with modes of 2.40 and 0.035 wt% Cs 2 O for high- and low-grade deposits, respectively, while Rb deposits are more unimodal with a median grade of 0.247 wt% Rb 2 O. Pegmatite-hosted Cs and Rb resources have median tonnages of 7.6 and 6.3 Mt, respectively. Covariation between ore mineralogy and the degree of crustal enrichment in pegmatite-hosted deposits is diagnostic of petrogenetic differences, including melt source characteristics, magma evolution, or variable degrees of volatile solubility. The Li pegmatite compilation is suitable for fitting robust numerical models to support quantitative assessments. More well-defined Rb and Cs pegmatite resources are required for quantitative assessments, but these data provide useful information about original in-place resources for framing supply discussions.

Ore Geology Reviews↗
USGS2024

Seismicity and anisotropic imaging reveal an active detachment beneath the northern Alaska Range foothills

North of the Denali Fault, the collision between the Yakutat block with North America is accommodated by a fold-thrust belt giving rise to the northern Alaska Range foothills. At the western end, the Kantishna Hills anticline hosts prominent microseismicity and surface deformation, interpreted as active folding of the Kantishna Hills anticline above a midcrustal detachment. We test for this detachment by using anisotropy-aware receiver functions to image fabric contrasts within the crust in context with seismicity. Seismic stations near the crest of the Kantishna Hills anticline and near its southern flank show a single strong contrast in dipping fabric at depths of 12–13 km near microseismicity clustering depths, consistent with a detachment plane beneath the fold. A minimum b -value at 10–13 km depth is consistent with seismicity on the detachment, compatible with the imaged anisotropic contrast, while off-fault seismicity is shallower and deeper with smaller magnitudes. South-dipping imbricate thrusts in schist characterize the northern Alaska Range foothills structure. This supports our interpretation of the observed anisotropy as reflecting SSW–SSE-dipping foliation above a detachment at ∼10–13 km depth that exploits existing crustal weaknesses along subtle fabric contrasts observed in the seismically quiescent region north of the actively deforming belt.

Alaska↗
USGS2025

Road salt collection and redistribution at an urban rain garden on sandy soil, Gary, Indiana

Rain gardens installed as green infrastructure to divert storm runoff from entering combined sewers also collect dissolved constituents and particulates. An urban rain garden in northwestern Indiana, USA, was continuously monitored from November 2019 to May 2021 to evaluate the fate of dissolved constituents entering the rain garden in runoff. Physical and chemical properties of soils in the rain garden were also monitored, along with underlying groundwater. Linear regression models relating specific conductance to chloride concentration indicated that the 0.0371-ha (3998 square feet) rain garden collected approximately 1490 kg (3285 pounds) of road salt from the surrounding 0.2228 ha (24,500 square feet) of impervious surfaces. Soils and groundwater were seasonally affected by road salt application but carryover from year to year was not indicated. Rain garden soil permeability (5.20 × 10 −5 to 9.72 × 10 −5 m/s) remained unchanged during the study period and soil organic carbon generally increased under native vegetation. The results suggest that a rain garden built on sandy soil can divert substantial quantities of runoff and dissolved constituents from combined sewers; however, chloride is transported to sub-infrastructure groundwater that eventually discharges to adjacent waterways with concentrations lower than those observed in runoff.

Indiana↗
USGS2024

Developing, testing, and communicating earthquake forecasts: Current practices and future directions

While deterministically predicting the time and location of earthquakes remains impossible, earthquake forecasting models can provide estimates of the probabilities of earthquakes occurring within some region over time. To enable informed decision-making of civil protection, governmental agencies, or the public, Operational Earthquake Forecasting (OEF) systems aim to provide authoritative earthquake forecasts based on current earthquake activity in near-real time. Establishing OEF systems involves several nontrivial choices. This review captures the current state of OEF worldwide and analyzes expert recommendations on the development, testing, and communication of earthquake forecasts. An introductory summary of OEF-related research is followed by a description of OEF systems in Italy, New Zealand, and the United States. Combined, these two parts provide an informative and transparent snapshot of today's OEF landscape. In Section 4, we analyze the results of an expert elicitation that was conducted to seek guidance for the establishment of OEF systems. The elicitation identifies consensus and dissent on OEF issues among a non-representative group of 20 international earthquake forecasting experts. While the experts agree that communication products should be developed in collaboration with the forecast user groups, they disagree on whether forecasting models and testing methods should be user-dependent. No recommendations of strict model requirements could be elicited, but benchmark comparisons, prospective testing, reproducibility, and transparency are encouraged. Section 5 gives an outlook on the future of OEF. Besides covering recent research on earthquake forecasting model development and testing, upcoming OEF initiatives are described in the context of the expert elicitation findings.

Reviews of Geophysics↗
USGS2025

Comparative properties of saponitic fault gouge and serpentinite muds cored from mud volcanoes of the Mariana subduction zone

We obtained 12 core samples for physical and chemical characterization from three serpentinite mud volcanoes (Yinazao, Asùt Tesoru, and Fantangisña) located on the forearc of the Mariana subduction system, that were drilled during International Ocean Discovery Program Expedition 366. Two samples from the Fantangisña mud volcano are interpreted to be clay-rich fault gouges derived from the subduction channel. Their bulk compositions are intermediate between the serpentinites and oceanic basalts. The oceanic crustal materials in the gouges have been thoroughly metasomatized and the serpentinites extensively altered to the trioctahedral, Mg-rich smectite clays saponite and corrensite. The only relict phases in clasts of crustal rock are accessory Ti- and P-bearing minerals. The two fault gouge samples have lower frictional strengths ( μ < 0.2) than the serpentinites ( μ = 0.2–0.4), and their measured permeabilities are also somewhat lower. Their physical and compositional properties correspond to saponitic gouges from other faults that juxtapose serpentinite against crustal rocks, in particular gouges from the two creeping traces of the San Andreas Fault recovered in the core from the San Andreas Fault Observatory at Depth. The décollement beneath Fantangisña mud volcano is thus expected to be very weak and likely characterized by stable slip.

Geophysics, Geochemistry, Geosystems↗