USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Oceans”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources
USGS2012

Three-dimensional modeling of pull-apart basins: implications for the tectonics of the Dead Sea Basin

We model the three-dimensional (3-D) crustal deformation in a deep pull-apart basin as a result of relative plate motion along a transform system and compare the results to the tectonics of the Dead Sea Basin. The brittle upper crust is modeled by a boundary element technique as an elastic block, broken by two en echelon semi-infinite vertical faults. The deformation is caused by a horizontal displacement that is imposed everywhere at the bottom of the block except in a stress-free “shear zone” in the vicinity of the fault zone. The bottom displacement represents the regional relative plate motion. Results show that the basin deformation depends critically on the width of the shear zone and on the amount of overlap between basin-bounding faults. As the width of the shear zone increases, the depth of the basin decreases, the rotation around a vertical axis near the fault tips decreases, and the basin shape (the distribution of subsidence normalized by the maximum subsidence) becomes broader. In contrast, two-dimensional plane stress modeling predicts a basin shape that is independent of the width of the shear zone. Our models also predict full-graben profiles within the overlapped region between bounding faults and half-graben shapes elsewhere. Increasing overlap also decreases uplift near the fault tips and rotation of blocks within the basin. We suggest that the observed structure of the Dead Sea Basin can be described by a 3-D model having a large overlap (more than 30 km) that probably increased as the basin evolved as a result of a stable shear motion that was distributed laterally over 20 to 40 km.

Dead Sea Basin↗
USGS2012

Relation of peralkaline magmatism to heterogeneous extension during the Middle Miocene, southeastern Nevada

Volcanism migrated southward in the northern Basin and Range province in the Oligocene and early Miocene to produce voluminous calcalkaline silicic ash flow tuffs. Alkaline volcanism became dominant by middle Miocene (17–14 Ma) as smaller volumes of rhyolite-trachyte-basalt suites were erupted from the relatively small Kane Springs Wash caldera complex including the Narrow Canyon, Boulder Canyon, and Kane Springs Wash calderas in southeastern Nevada. Only minor extension affected the Kane Wash area before the end of calcalkaline activity, but extension expressed by rate of progressive stratal tilt peaked (15–13.5 Ma) with peralkaline magmatism (14.7–14.4 Ma). Variations in distribution, degree, style, and timing of deformation demonstrate heterogeneous extension in the Kane Wash area. Only minor extension and tilting persisted post-middle Miocene (<12 Ma). All major eruptive sources overlap domains of rapid extension. Most of the eruptive volumes from the two oldest calderas of the complex apparently pooled within their calderas, creating outflow deficits. Denudation faulting associated with magmatic tumescence may have followed preexisting active extensional fault systems to unload magma chambers, thus triggering eruptions into structural depressions. Evolution of alkaline magmas is demonstrated by progressive increases in peralkalinity and high field strength elements such as Zr, Y, and Nb. Nd, Pb, and Sr isotopic compositions provide evidence that significantly less crustal interaction affected middle Miocene peralkaline magmas than pre-middle Miocene calcalkaline magmas. ε Nd values are −5 to −7 for peralkaline magmas and −7 to −11 for calcalkaline magmas; 208 Pb/ 204 Pb ratios are 38.2–38.6 for peralkaline magmas and 38.5–38.9 for calcalkaline magmas. Regional cooling, short duration of magmatism, small volumes of magma, and local extension caused less crustal interaction in peralkaline Kane Wash magmas than in earlier magmas. North of the Kane Wash area, older more voluminous calcalkaline magmas intruded hotter crust for a longer period and thus interacted with the crust to a greater degree in spite of synvolcanic extension.

Journal of Geophysical Research↗
USGS2012

Surface seismic and electrical methods to detect fluids related to faulting

In the absence of drilling, surface-based geophysical methods are necessary to observe fault zones and fault zone physical properties at seismogenic depths. These in situ physical properties can then be used to infer the presence and distribution of fluids along faults, although such observations are by nature indirect and become less exact with greater depth. Multiple observations of a range of such geophysical properties as compressional and shear seismic velocity ( V p and V s ), V p /V5 ratio (related to Poisson's ratio), resistivity and attenuation in and adjacent to fault zones offer the greatest hope of making inferences of the fault zone geometry, fluids in the fault zone, and fluid reservoirs in the surrounding crust. For simple geometries, fault zone guided waves can provide information on fault zone width and velocities for faults of the order of 200 m wide. To address the question of whether a narrow fault zone can be imaged well enough at depths of seismic rupture to infer the presence of anomalously high fluid/rock ratios, we present synthetic seismic tomography and magnetotelluric examples for an ideal case of a narrow fault zone with a simple geometry, large changes in material properties, and numerous earthquakes within the fault zone. A synthetic 0.5-km wide fault zone with 20% velocity reduction is well imaged using local earthquake tomography. When sequential velocity inversions are done, the true fault width is found, even to 9 km depth, although the calculated amplitude of the velocity reduction is lower than the actual amplitude. V p / V s is as well determined as V p . Magnetotelluric imaging of a synthetic fault zone shows that a conductive fault zone can be well imaged within the upper 10 km. Further, a narrow (1 km) very low resistivity (3 ohm m) fault core can be imaged within a broad (5 km) low resistivity (10 ohm m) fault zone, illustrating that regions of a fault containing large quantities of interconnected fluids within a broader, conductive fault zone should be detectable. Thus variations in fluid content and fluid pressure can be inferred from electrical and seismic methods but there will always be uncertainty in these inferences due to the trade-off with other factors, such as intrinsic variations in porosity, mineralogy, and pore geometry. The best approach is combined modeling of varied seismic and electrical data.

Journal of Geophysical Research Solid Earth↗
USGS2012

The 40Ar/39Ar ages and tectonic setting of the Middle Eocene northeast Nevada volcanic field

Widespread middle to late Eocene calc-alkalic volcanism, which formed the Northeast Nevada Volcanic Field, marks the earliest Tertiary volcanism in the northern Basin and Range. The central part of this major field in northeast Nevada and adjacent Utah is herein defined by 23 40 Ar/ 39 Ar ages that range from 42.6 to 39.0 Ma, rock chemistry from 12 localities, stratigraphic position of the volcanic rocks above a regional middle Eocene unconformity, volcanic setting, and lithology. The type area is at Nanny Creek, in the northern Pequop Mountains, Nevada, where rhyolite ash flow tuffs are overlain by a thick section of intercalated andesitic to dacitic flows and flow breccias and rhyolite ash flow tuffs. The intermediate composition rocks are locally derived throughout the volcanic field, whereas the sources for rhyolite ash flow tuffs are unknown. The uniform and widespread occurrence of the andesitic and dacitic flows and flow breccias strongly suggests that the upper crust was perforated by intermediate composition magma across the entire region. In the central part of the field the middle Eocene volcanic rocks rest with depositional angular discordance on deformed middle Paleozoic to Triassic strata; ostracode-bearing limestone, probably of early Eocene age, is locally present below the volcanic rocks. In the western and southeastern parts of the field these middle Eocene volcanic rocks rest with depositional angular discordance on lower Eocene lacustrine strata of the Elko and White Sage Formations, respectively. This angular discordance documents a middle Eocene deformational event previously unrecognized in the region.

Journal of Geophysical Research↗
USGS2012

Analysis of ERS 1 synthetic aperture radar data of frozen lakes in northern Montana and implications for climate studies

Lakes that freeze each winter are good indicators of regional climate change if key parameters, such as freeze-up and breakup date and maximum ice thickness, are measured over a decade-scale time frame. Synthetic aperture radar (SAR) satellite data have proven to be especially useful for measurement of climatologically significant parameters characteristic of frozen lakes. In this paper, five lakes in Glacier National Park, Montana, have been studied both in the field and using Earth Remote-Sensing Satellite (ERS) 1 SAR data during the 1992-1993 winter. The lakes are characterized by clear ice, sometimes with tubular or rounded bubbles, and often with a layer of snow ice on top of the clear ice. They are also often snow covered. Freeze-up is detected quite easily using ERS 1 SAR data as soon as a thin layer of ice forms. The effect of snow ice on the backscatter is thought to be significant but is, as yet, undetermined. On the five lakes studied, relative backscatter was found to increase with ice thickness until a maximum was reached in February. Breakup, an often ill-defined occurrence, is difficult to detect because surface water causes the SAR signal to be absorbed, thus masking the ice below. Comparison of the bubble structure of thaw lakes in northern Alaska with lakes in northern Montana has shown that the ice structure is quite different, and this difference may contribute to differential SAR signature evolution in the lakes of the two areas.

Journal of Geophysical Research↗
USGS2012

Dust deposition in southern Nevada and California, 1984–1989: Relations to climate, source area, and source lithology

Dust samples collected annually for 5 years from 55 sites in southern Nevada and California provide the first regional source of information on modern rates of dust deposition, grain size, and mineralogical and chemical composition relative to climate and to type and lithology of dust source. The average silt and clay flux (rate of deposition) in southern Nevada and southeastern California ranges from 4.3 to 15.7 g/m 2 /yr, but in southwestern California the average silt and clay flux is as high as 30 g/m 2 /yr. The climatic factors that affect dust flux interact with each other and with the factors of source type (playas versus alluvium), source lithology, geographic area, and human disturbance. Average dust flux increases with mean annual temperature but is not correlated to decreases in mean annual precipitation because the regional winds bring dust to relatively wet areas. In contrast, annual dust flux mostly reflects changes in annual precipitation (relative drought) rather than temperature. Although playa and alluvial sources produce about the same amount of dust per unit area, the total volume of dust from the more extensive alluvial sources is much larger. In addition, playa and alluvial sources respond differently to annual changes in precipitation. Most playas produce dust that is richer in soluble salts and carbonate than that from alluvial sources (except carbonate‐rich alluvium). Gypsum dust may be produced by the interaction of carbonate dust and anthropogenic or marine sulfates. The dust flux in an arid urbanizing area may be as much as twice that before disturbance but decreases when construction stops. The mineralogic and major‐oxide composition of the dust samples indicates that sand and some silt is locally derived and deposited, whereas clay and some silt from different sources can be far‐traveled. Dust deposited in the Transverse Ranges of California by the Santa Ana winds appears to be mainly derived from sources to the north and east.

California, Nevada↗
USGS2012

Gravity survey of the Mount Toondina impact structure, South Australia

Gravity and seismic reflection data, together with geologic mapping, indicate that the Mount Toondina feature in South Australia is best interpreted as an eroded 4-km-diameter impact structure consisting of a ring structural depression surrounding a pronounced central uplift. Beds at the center of the structure within the central uplift have been raised as much as 200 m from depth and deformed by convergent flow. Seismic reflection data indicate that deformation extends to depths of only ≈800 m; at greater depths the reflectors are nearly flat lying, indicating little or no deformation. Gravity data show residual anomalies of +1.0 mGal coincident with the central uplift and a −0.5 Mgal low associated with the ring structural depression. Modeling of the gravity data indicates that relatively high-density material occurs within the central uplift, whereas the ring depression is filled with low-density material. The deformation at Mount Toondina is typical of a complex impact crater; the 4-km diameter is consistent with the expected threshold size for complex craters formed in weak to moderate strength sedimentary rocks.

South Australia↗
USGS2012

Hydrous carbonates on Mars?: Evidence from Mariner 6/7 infrared spectrometer and ground‐based telescopic spectra

Absorption features at 2.28 and 5.4 μm identified in Mariner 6/7 infrared spectrometer and terrestrial telescopic spectra are consistent with the spectra of hydrous magnesium carbonates such as hydromagnesite and artinite. Spectral characteristics of these hydrous carbonates are different from those of the anhydrous carbonates, as the former do not have the strong spectral features typically associated with anhydrous carbonates such as calcite and siderite. Theoretical mixing indicates that, depending on the type of hydrous carbonate, 10–20 wt % can be incorporated into the regolith without contradicting the spectral observations or the Viking x ray fluorescence chemical analysis. Hydrous carbonates form as weathering products of mafic minerals in the presence of H 2 O and CO 2 , even in the Antarctic. Their formation as evaporite minerals from either original magmas or hydrothermally altered rocks is consistent with the Martian environment, provided liquid water is or has been at least transiently present. On Earth, formation of hydrous Mg carbonates is associated with the production of amorphous iron oxides, which is consistent with both the environment and the inferred surface mineralogy of Mars. These minerals are about 60 wt % H 2 O, CO 3 , and OH; if they are abundant everywhere at the 10% level, then about 6% of the surface weight could be volatiles bound in this type of mineral. Although the stability of hydrous carbonates in a Martian environment is uncertain, there may be kinetic factors inhibiting the dehydration of these minerals, which may persist metastably in the current environment. Although the spectroscopic evidence for anhydrous carbonates is scant, the possible presence of hydrous carbonates provides an appealing mechanism for the existence of carbonates on Mars.

Journal of Geophysical Research↗
USGS2012

Venus cartography

The entire surface of the planet Venus is being mapped at global and regional scales (1:50,000,000 through 1:1,500,000) with synthetic aperture radar (SAR), radar altimeter, and radiometer measurements of physical properties from the Magellan spacecraft. The mapping includes SAR image mosaics, shaded relief maps, and topographic contour overlays made from altimetry data and by radargrammetric methods. Methods used include new techniques of radar image processing that became operational as a result of the Magellan mission. The area being mapped (at a resolution of 75 m/pixel) is roughly equivalent to that of Earth, including seafloors. The mapping is designed to support geologic and geophysical investigations.

Journal of Geophysical Research E: Planets↗
USGS2012

Superposed local and regional paleostresses: fault-slip analysis of Neogene extensional faulting near coeval caldera complexes, Yucca Flat, Nevada

Numerous reduced stress tensors are computed by multiple inversions of 906 temporally and spatially partitioned fault-slip data from the Yucca Flat region in the southwest Nevada volcanic field to constrain the Neogene paleostress and faulting history and to investigate how the regional tectonic stress field was affected by local caldera magmatism. Perturbed, shallow (<400 m), pre-11 Ma paleostress configurations, determined west and northwest of present (post-11 Ma) Yucca Flat basin, existed during mild extensional faulting and are attributed to superposition of transient caldera-magmatic stresses on the regional stress field. Northwest of Yucca Flat a progressive shift in least principal stress (σ 3 ) directions near known calderas located 5–15 km to the west occurred under a normal-slip stress state during caldera development between about 15 and 13 Ma. A brief (∼0.5 m.y.) change to a strike-slip stress state occurred at about 13 Ma and was accompanied by small-offset, quasi-conjugate strike-slip faulting. This stress state was most distinct, relative to a normal-slip state, near calderas where stress solutions and fault relations indicate closer affinities to a reverse-slip state. Inferred 11.6–11.45 Ma paleostress tensors indicate radial tension associated with either initial caldera collapse or local post-collapse topographic modification of the stress field. Post-11 Ma normal-slip stress tensors are associated with normal- and oblique-slip faults that accommodated subsidence and eastward extension of Yucca Flat basin away from the caldera complexes. These tensors do not indicate stress modifications due to residual caldera-related effects and thus were used to infer post-11 Ma regional stress changes. The stress field has rotated as much as 65° clockwise since 11 Ma during extensional development of Yucca Flat basin, with most of the rotation and extension occurring before about 8.5 Ma. Results suggest that shallow magmatism and caldera development can strongly alter extensional tectonic stress fields, fault patterns, and slip directions in the uppermost crust out to distances of roughly two magma chamber radii away from a magma body.

Journal of Geophysical Research↗
USGS2012

Interseismic uplift at the Nankai subduction zone, southwest Japan, 1951–1990

Uplift as a function of time from 1951 through 1990 has been deduced from annual mean sea level measured at 15 tide gages along the Nankai subduction zone, southwest Japan. The recurrence interval for rupture of the Nankai subduction zone is about 100 years, and the most recent rupture was in late 1946. Thus the 1951–1990 uplift record covers most of the first half of the earthquake cycle. The precision of the uplift record is better than could be obtained currently by annual Global Positioning System (GPS) measurements. The pre‐1960 uplift record shows rapid deformation that appears to terminate in 1959. After 1959 the uplift record is remarkably linear in time: Significant curvature in the uplift‐versus‐time plots is detected at only three of the 15 tide gages. The inferred uplift rates are not quantitatively consistent with the predictions of either the viscoelastic coupling or elastic half‐space models of subduction, but the agreement is sufficient to suggest that the causative physical mechanisms have been identified. The immediate postseismic response is controlled by the propagation of slip downward along the downdip extension of the coseismic rupture, and the interseismic response is caused by the accumulation of a slip deficit on the main thrust zone. Asthenosphere relaxation is not required to explain the observations.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Seismic velocity structure and composition of the continental crust: A global view

Seismic techniques provide the highest‐resolution measurements of the structure of the crust and have been conducted on a worldwide basis. We summarize the structure of the continental crust based on the results of seismic refraction profiles and infer crustal composition as a function of depth by comparing these results with high‐pressure laboratory measurements of seismic velocity for a wide range of rocks that are commonly found in the crust. The thickness and velocity structure of the crust are well correlated with tectonic province, with extended crust showing an average thickness of 30.5 km and orogens an average of 46.3 km. Shields and platforms have an average crustal thickness nearly equal to the global average. We have corrected for the nonuniform geographical distribution of seismic refraction profiles by estimating the global area of each major crustal type. The weighted average crustal thickness based on these values is 41.1 km. This value is 10% to 20% greater than previous estimates which underrepresented shields, platforms, and orogens. The average compressional wave velocity of the crust is 6.45 km/s, and the average velocity of the uppermost mantle ( Pn velocity) is 8.09 km/s. We summarize the velocity structure of the crust at 5‐km depth intervals, both in the form of histograms and as an average velocity‐depth curve, and compare these determinations with new measurements of compressional wave velocities and densities of over 3000 igneous and metamorphic rock cores made to confining pressures of 1 GPa. On the basis of petrographic studies and chemical analyses, the rocks have been classified into 29 groups. Average velocities, densities, and standard deviations are presented for each group at 5‐km depth intervals to crustal depths of 50 km along three different geotherms. This allows us to develop a model for the composition of the continental crust. Velocities in the upper continental crust are matched by velocities of a large number of lithologies, including many low‐grade metamorphic rocks and relatively silicic gneisses of amphibolite facies grade. In midcrustal regions, velocity gradients appear to originate from an increase in metamorphic grade, as well as a decrease in silica content. Tonalitic gneiss, granitic gneiss, and amphibolite are abundant midcrustal lithologies. Anisotropy due to preferred mineral orientation is likely to be significant in upper and midcrustal regions. The bulk of the lower continental crust is chemically equivalent to gabbro, with velocities in agreement with laboratory measurements of mafic granulite. Garnet becomes increasingly abundant with depth, and mafic garnet granulite is the dominant rock type immediately above the Mohorovicic discontinuity. Average compressional wave velocities of common crustal rock types show excellent correlations with density. The mean crustal density calculated from our model is 2830 kg/m 3 , and the average SiO 2 content is 61.8%.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Geodetic monitoring of the southern San Andreas Fault, California, 1980-1991

Five geodetic arrays (10 to 40 km aperture) located along the San Andreas fault have been surveyed frequently (several times in most years) over the 1980–1991 interval to detect possible fluctuations in the deformation rate. In each survey of an array the distances between the same four to seven pairs of geodetic monuments were measured. The distances measured (with corresponding standard deviation) range from 8.4 km (3.4 mm) to 38 km (8.2 mm). The data are displayed as plots of measured distance as a function of time. Linear fits in such plots furnish a satisfactory representation of the data. That is, the scatter of the data about the linear fits is within the range expected for the estimated standard deviations in measurement. However, there are coherent low‐amplitude (within the observational error) fluctuations apparent in some of the measured distances. Those fluctuations need not be tectonic effects but rather may be either random patterns or artifacts introduced by systematic drift in instrument calibration or wander of the geodetic monuments. We conclude that the measurements are consistent with steady deformation of the arrays over the 1980–1991 interval, and we find no convincing evidence in the data for fluctuations in the rate of deformation.

California↗
USGS2012

Estimation of rod scale errors in geodetic leveling

Comparisons among repeated geodetic levelings have often been used for detecting and estimating residual rod scale errors in leveled heights. Individual rod-pair scale errors are estimated by a two-step procedure using a model based on either differences in heights, differences in section height differences, or differences in section tilts. It is shown that the estimated rod-pair scale errors derived from each model are identical only when the data are correctly weighted, and the mathematical correlations are accounted for in the model based on heights. Analyses based on simple regressions of changes in height versus height can easily lead to incorrect conclusions. We also show that the statistically estimated scale errors are not a simple function of height, height difference, or tilt. The models are valid only when terrain slope is constant over adjacent pairs of setups (i.e., smoothly varying terrain). In order to discriminate between rod scale errors and vertical displacements due to crustal motion, the individual rod-pairs should be used in more than one leveling, preferably in areas of contrasting tectonic activity. From an analysis of 37 separately calibrated rod-pairs used in 55 levelings in southern California, we found eight statistically significant coefficients that could be reasonably attributed to rod scale errors, only one of which was larger than the expected random error in the applied calibration-based scale correction. However, significant differences with other independent checks indicate that caution should be exercised before accepting these results as evidence of scale error. Further refinements of the technique are clearly needed if the results are to be routinely applied in practice.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Rapid extension recorded by cooling‐age patterns and brittle deformation, Naxos, Greece

The metamorphic core complex exposed as the island of Naxos in the Aegean Sea records an unusually complete sequence of structures developed as a result of continental extension. The structures formed during Miocene rise and cooling from ductile, upper amphibolite facies and anatectic conditions to brittle near‐surface conditions beneath the Naxos detachment fault. Top‐to‐the‐north ductile fabrics in the footwall, which initially developed during amphibolite facies prograde metamorphism, were overprinted by a succession of north directed, normal sense lower‐temperature brittle structures as the footwall was tectonically unloaded and unroofed. Pseudotachylite and cataclasite formation, brittle faulting, alteration, and erosion of the footwall occurred during continued slip and tectonic denudation. Neogene conglomerate and megabreccia, in part derived from exhumation of this footwall, lie structurally above the peripheral Naxos fault. Published K‐Ar and 40 Ar/ 39 Ar ages for hornblende, white mica, and biotite in the footwall decrease northwestward; apparent ages 17–50 Ma in the southeast correspond to areas of low metamorphic grade where preextension argon was partially retained. Published ages 16–10 Ma in higher‐grade rocks of the domal core in the north are cooling ages that for each of the three minerals show a component of younging in the NNE direction of extension. Assuming this is the direction of unroofing, we interpret the rate of this younging as the fault slip rate as the footwall rocks moved >20 km SSW relative to their hanging wall along the base of the Naxos detachment fault. The calculated rates of slip average 5–8 mm/yr, comparable to maximum rates reported in the Basin and Range province.

Naxos↗
USGS2012

Effects of geothermal development on deformation in the Long Valley Caldera, eastern California, 1985-1994

Long Valley caldera in east central California has been the site of crustal unrest in the form of seismicity and ground deformation in response to magmatic inflation since 1980. Uplift of the resurgent dome has totaled ∼0.6 m over the 1975–1992 period. Within this region of uplift, and near the southwestern edge of the resurgent dome, is the Casa Diablo area, which experienced relative subsidence of 0.17 m between 1985 and 1992. Geothermal fluid production began at Casa Diablo in 1985 to supply a binary electric power plant; currently, three such plants generate a total of about 40 MW of electricity. The plants are supplied by 170°C water pumped from depths near 150m; all the produced water is reinjected at cooler temperatures at depths near 600 m. Analyses of data from (1) regional leveling lines and a network of bench marks in the geothermal well field area, (2) tilt observations from an L‐shaped array of bench marks, and (3) calculations relating pressure and temperature changes to subsidence indicate that relative subsidence at Casa Diablo results mainly from reductions in pressure in the shallow production reservoir and overlying formations and reductions in temperature in the underlying injection reservoir. Secondary effects on deformation are caused by offsets along the Taylor‐Bryant fault bounding the west side of the well field.

California↗
USGS1996

Identifying coseismic subsidence in tidal-wetland stratigraphic sequences at the Cascadia subduction zone of western North America

Tidal-wetland stratigraphy reveals that great plate boundary earthquakes have caused hundreds of kilometers of coast to subside at the Cascadia subduction zone. However, determining earthquake recurrence intervals and mapping the coastal extent of past great earthquake ruptures in this region are complicated by the effects of many sedimentologic, hydrographic, and oceanographic processes that occur on the coasts of tectonically passive as well as active continental margins. Tidal-wetland stratigraphy at many Cascadia estuaries differs little from that at similar sites on passive-margin coasts where stratigraphic sequences form through nonseismic processes unrelated to coseismic land level changes. Methods developed through study of similar stratigraphic sequences in Europe provide a framework for investigating the Cascadia estuarine record. Five kinds of criteria must be evaluated when inferring regional coastal subsidence due to great plate boundary earthquakes: the suddenness and amount of submergence, the lateral extent of submerged tidal-wetland soils, the coincidence of submergence with tsunami deposits, and the degree of synchroneity of submergence events at widely spaced sites. Evaluation of such criteria at the Cascadia subduction zone indicates regional coastal subsidence during at least two great earthquakes. Evidence for a coseismic origin remains equivocal, however, for the many peat-mud contacts in Cascadia stratigraphic sequences that lack (1) contrasts in lithology or fossils indicative of more than half a meter of submergence, (2) well-studied tsunami deposits, or (3) precise ages needed for regional correlation. Paleoecologic studies of fossil assemblages are particularly important in estimating the size of sudden sea level changes recorded by abrupt peat-mud contacts and in helping to distinguish erosional and gradually formed contacts from coseismic contacts. Reconstruction of a history of great earthquakes for the Cascadia subduction zone will require rigorous application of the above criteria and many detailed investigations.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Interseismic deformation along the San Andreas Fault in southern California

Eight trilateration networks located along the San Andreas fault in southern California have been surveyed 8 to 19 times within a 14- to 17-year interval between 1971 and 1992. The data, measurements of distances between the same 10 to 32 pairs of geodetic monuments within a network in each of the surveys, have been corrected for coseismic offsets from nearby earthquakes calculated from dislocation models. The corrected data, a total of 2027 measurements, are displayed in the form of plots of measured distance versus time for each of the 167 lines measured. The hypothesis that the interseismic deformation is steady is tested by examining whether deviations from linear fits to the data in the plots are within the range expected for observational error. A significant deviation from steady deformation is found only for the network located neax Palmdale, California. In that network, many of the measurements made in the survey of early 1982 deviate from the trend defined by the measurements in other surveys. The deviations are not of the form (fixed proportional error) one would generally expect from systematic survey error. If the survey of early 1982 is excluded, the remaining data at Palmdale are consistent with steady deformation. Thus the apparent strain event observed near Palmdale in 1982 was transient.

Journal of Geophysical Research↗