SEARCH · USGS Science

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources

USGS1963

Geology of the Anlauf and Drain Quadrangles, Douglas and Lane Counties, Oregon

The Anlauf and Drain quadrangles, Oregon, lie about 20 miles south of the city of Eugene, in Douglas and Lane Counties. They constitute an area of about 435 square miles that includes parts of both the Cascade Range and Coast Range physiographic provinces. A sequence of lower Tertiary sedimentary and volcanic rocks with a maximum thickness of about 20,000 feet is exposed in the area. The oldest part of this sequence is the Umpqua formation of early Eocene age consisting of a lower member of vesicular and amygdaloidal olivine basalt flows, a middle member of water-laid vitric and lapilli crystal tuff, and an upper member of interbedded fissile siltstone and basaltic sandstone which contains a 300-foot tongue of massive to thick-bedded basaltic sandstone near its top. These rocks are predominantly of marine origin, although the general absence of pillow structures which are common in basaltic lavas of equivalent age elsewhere in the Coast Ranges suggests that some of the flows were poured out subaerially. The overlying tuff member, however, contains Foraminifera and in places has a lime content slightly in excess of 10 percent. Mollusca and Foraminifera indicate that the Umpqua formation is of early Eocene age and is a correlative of the Capay formation of California. The Tyee formation of middle Eocene age overlies the Umpqua formation and consists of more than 5,000 feet of rhythmically deposited sandstone and siltstone in beds 2 to 30 feet thick. The basal part of each bed consists of medium- to coarse-grained sandstone that grades upward into fine-grained sand- stone and siltstone. The principal constituents of the sandstone are quartz, partly a1tered feldspar, mica, clay, and fragments of basalt, fine-grained argillaceous rocks, and mica schist. Other detrital minerals include epidote, garnet, blue-green hornblende, tourmaline, and zoisite. The depositional environment of the Tyee formation is poorly known, although the rhythmic-graded bedding suggests turbidity currents. About 500 feet of sandstone and siltstone assigned to the Spencer formation of late Eocene age unconformably overlies the Tyee formation. The Spencer formation, better exposed in the east-central part of the Coast Ranges, contains marine fossils but also has thin impure coal beds, indicative of strand-line accumulation. The sandstone in the Spencer formation is very similar to that in the Tyee formation, from which it was probably derived. The Fisher formation contains about 5,500 feet of nonmarine pyroclastic and volcanic rocks that are related to the volcanic rock sequences of the western Cascade Range. The formation is characterized by a wide variety of rock types, including conglomerate, tuffaceous sandstone and siltstone, vitric and crystal tuff, waterlaid and mudflow breccia, and andesitic lava flows. These rocks gen- erally occur in lenticular beds that have little stratigraphic significance. The rocks apparently accumulated on a plain slightly above sea level that was subjected alternately to fiooding by running water and to desiccation. Fossil leaves from the lowermost part of the Fisher formation are of late Eocene age; the upper part of the formation is of early, and possibly niiddle, Oligocene age. A few exposures of olivine basalt were mapped in the extreme northern part of the Anlauf quadrangle. The flows, more extensively exposed to the north, overlie the Fisher formation, and, therefore, are tentatively considered to be post-Oligocene in age. All these stratigraphic units, but principally the Fisher formation, are cut by dikes, sills, and stocklike bodies of 'porphyritic basalt, diabase, and norite. Contemporaneously with the emplacement of most of these rocks, in late Miocene (?) time, hydrothermal solutions locailly altered the sedimentary and extrusive igneous racks and deposited cinnabar and other sulfide minerals, carbonates, and silica. Three parallel nartheastward-trending

Bulletin↗

USGS1978

A gravity study of the northern part of the Arctic National Wildlife Range, Alaska

Interpretation of all publicly available onshore gravity data provides a basis for outlining regional elements of the basement and overlying structure in the northern part of the Arctic National Wildlife Range. Major post-Carboniferous sedimentary basins whose centers lie offshore on the Beaufort Shelf extend onshore in the northern part of the study area. There is strong evidence that dense basement rocks beneath these onshore extensions rise to relatively shallow depths along the northeast Alaskan coast. Geologic studies and interpretation of the gravity data indicate that the gross structural and stratigraphic framework of this area is similar to that of the Prudhoe Bay region to the west. A high potential for petroleum accumulation in the Wildlife Range is indicated by the surface presence of oil seeps, oil sands, and outcrops of reservoir and source rocks along the southern margins of the onshore basinal areas. Present data suggest that the greatest potential for onshore accumulations of hydrocarbons lies in the area south and east of Barter Island and that possibilities exist there for commercially substantial reserves. The potential of this area cannot be fully assessed, however, until the subsurface extent of several major unconformities is known. Unfortunately, gravity data alone are of little use in such determinations. South of the mountain front, large granitic intrusions are marked by a sharply defined gravity minimum. The subsurface distribution of these bodies could probably be mapped by detailed gravity surveys. Detailed aeromagnetic surveys should serve equally well for such a purpose.

Alaska↗

USGS2008

Interpolation of reconnaissance multibeam and single-beam bathymetry offshore of Milford, Connecticut

This report releases echosounder data from the northern part of the National Oceanic and Atmospheric Administration (NOAA) hydrographic survey H11044 in Long Island Sound, off Milford, Connecticut. The data have been interpolated and regridded into a complete-coverage data set and image of the sea floor. The grid produced as a result of the interpolation is at 10-m resolution. These data extend an already published set of reprocessed bathymetric data from the southern part of survey H11044. In Long Island Sound, the U.S. Geological Survey, in cooperation with NOAA and the Connecticut Department of Environmental Protection, is producing detailed maps of the sea floor. Part of the current phase of research involves studies of sea-floor topography and its effect on the distributions of sedimentary environments and benthic habitats. This data set provides a more continuous perspective of the sea floor than was previously available. It helps to define topographic variability and benthic-habitat diversity for the area and improves our understanding of oceanographic processes controlling the distribution of sediments and benthic habitats. Inasmuch as precise information on environmental setting is important for selecting sampling sites and accurately interpreting point measurements, this data set can also serve as a base map for subsequent sedimentological, geochemical, and biological research.

Connecticut↗

USGS1967

Hydrologic and chemical data for wells, springs, and streams in Nevada, TPS. 1-21 N., and Rs. 41-57 E

Studies of published and unpublished geologic, hydrologic, and chemical-quality data for ground and surface water in central Nevada, Tps. 1 to 21 N. and Rs. 41 to 57 E., Mount Diablo base and meridian, reveal the following information: Rocks exposed in central Nevada are of sedimentary and igneous origin and range in age from Cambrian to Recent. Rocks of Paleozoic age generally are carbonate or clastic, and rocks of Mesozoic age generally are clastic and granitic. Rocks of Tertiary age principally are volcanic, and the valley fill of Quaternary age is alluvial-fan and lake deposits. The rocks are folded, faulted, and highly fractured. Precipitation is closely related to altitude. In general, as the altitude increases the precipitation increases. Most of the streamflow in the valleys originates as snow in the nearby mountains. The streams generally flow only in response to snowmelt and to flash-flood-producing storms. Important chemical quality characteristics of the ground and surface water in central Nevada are hardness, expressed as CaCO 3 , generally in excess of 120 ppm, and a dissolved-solids content of less than 500 ppm. The principal chemical types of both ground and surface waters are sodium and calcium bicarbonates. The major uses of ground water in central Nevada are for irrigation and stock. Frequency of use of wells in decreasing order is: irrigation, stock, domestic, industrial, municipal, and observation. Of the 606 wells tabulated, 29 have multiple uses. Frequency of use of spring water in decreasing order is: stock, irrigation, domestic, and public facilities. Of the 135 springs tabulated, 5 have multiple uses.

Nevada↗

USGS2001

Low-Flow Characteristics and Discharge Profiles for Selected Streams in the Cape Fear River Basin, North Carolina, Through 1998

An understanding of the magnitude and frequency of low-flow discharges is an important part of evaluating surface-water resources and planning for municipal and industrial economic expansion. Low-flow characteristics are summarized in this report for 67 continuous-record gaging stations and 121 partial-record measuring sites in the Cape Fear River Basin of North Carolina. Records of discharge collected through the 1998 water year were used in the analyses. Flow characteristics included in the summary are (1) average annual unit flow; (2) 7Q10 low-flow discharge, the minimum average discharge for a 7-consecutive-day period occurring, on average, once in 10 years; (3) 30Q2 low-flow discharge; (4) W7Q10 low-flow discharge, similar to 7Q10 discharge except that only flow during November through March is considered; and (5) 7Q2 low-flow discharge. Low-flow characteristics in the Cape Fear River Basin vary widely in response to changes in geology and soil types. The area of the basin with the lowest potentials for sustained base flows is underlain by the Triassic basin in parts of Durham, Wake, and Chatham Counties. Typically, these soils are derived from basalt and fine-grained sedimentary rocks that allow very little infiltration of water into the shallow aquifers for storage and later release to streams during periods of base flow. The area of the basin with the highest base flows is the Sand Hills region in parts of Moore, Harnett, Hoke, and Cumberland Counties. Streams in the Sand Hills have the highest unit low flows in the study area as well as in much of North Carolina. Well-drained sandy soils in combination with higher topographic relief relative to other areas in the Coastal Plain contribute to the occurrence of high potentials for sustained base flows. A number of sites in the upper part of the Cape Fear River Basin underlain by the Carolina Slate Belt and Triassic basin, as well many sites in lower areas of the Coastal Plain (particularly the Northeast Cape Fear River Basin), have zero or minimal (defined as less than 0.05 cubic foot per second) 7Q10 discharges. In this area, the poorly sustained base flows are reflective of either (1) thin soils that have very little storage of water to sustain streams during base-flow periods (Carolina Slate Belt), or (2) soils having very low infiltration rates (Triassic basin). As a result, there is insufficient water stored in the surficial aquifers for release to streams during extended dry periods. Within the part of the study area underlain by the Carolina Slate Belt, streams draining basins 5 square miles or less may have zero or minimal 7Q10 discharges. The part of the study area underlain by the Triassic basin has a higher drainage-area threshold at 35 square miles, below which streams will likely have zero or minimal 7Q10 discharges. Occurrences of zero or minimal 7Q10 discharges in the Coastal Plain were noted, though on a more widespread basis. In this area, low flows are more likely affected by the presence of poorly drained soils in combination with very low topographic relief relative to other areas in the Coastal Plain, particularly the Sand Hills. In eastern Harnett County and northeastern Cumberland County, basins with less than 3 square miles may be prone to having zero or minimal 7Q10 discharges. Soils in this area have been described as a mixture of sandy and clay soils. In the Northeast Cape Fear River Basin, particularly on the western side of the river, streams draining less than 8 square miles may have zero or minimal 7Q10 discharges. The poorly drained clay soils along with very little topographic relief results in the low potential for sustained base flows in this part of the study area. Drainage area and low-flow discharge profiles are presented for 13 streams in the Cape Fear River Basin; these profiles reflect a wide range in basin size, characteristics, and streamflow conditions. In addition to the Haw River and Cape Fear River main stem, pro

North Carolina↗

USGS1988

The Blake Plateau Basin and Carolina Trough

Presently, the continental margin of the southeastern United States (Fig. 1) forms a zone of transition between the actively building, steep-fronted carbonate platform of the Bahamas and the typical eastern North American terrigenous clastic-dominated, drowned, shelf-slope-rise configuration. This region of the continental margin is underlain by two major sedimentary basins—the Blake Plateau Basin and the Carolina Trough (Fig. 2)—which are different in shape, basement structure, and history. Indeed, the two southern basins show some of the greatest contrasts of any basins of eastern North America, especially in their early response to rifting and in the change from rifting to drifting. The region has experienced abrupt major changes in geological conditions, most notably the onset of Gulf Stream flow in the early Tertiary. Morphologically, the area is dominated by the broad, flat Blake Plateau at about 800-1,000 m water depth (Fig. 1). The plateau is bounded to the east by the extremely steep Blake Escarpment, descending to 5,000 m water depths. To the west, a short continental slope rises to a continental shelf. This Blake Plateau morphology characterizes the margin east of Florida and north of the Bahamas. North of Florida the margin merges into the typical shelf-slope-rise morphology. Just north of the Blake Escarpment and its northern projection, the Blake Spur, the Blake Ridge extends away from the continental slope at water depths exceeding 2,000 m (Fig. 1). This broad ridge is a Cenozoic, sedimentary drift deposit controlled by bottom currents. (For the reader who is beginning to wonder why half of the features of this region seem to be named "Blake", the Blake was a Coast Survey steamer from which investigations off the southeastern U.S. were carried out in 1877 to 1880. Ferromanganese nodules were discovered on the Blake Plateau at that time [Murray, 1885].)

Blake Plateau basin; Carolina Trough↗

USGS1957

Geology of the Basin Quadrangle, Montana

The Basin quadrangle, in the northern part of the Boulder Mountains between Butte and Helena, Montana, is underlain principally by igneous rocks that include Late Cretaceous quartz latitic and andesitic Elkhorn Mountains volcanics, quartz monzonite and related rocks of the Boulder batholith, Oligocene(?) quartz latitic volcanic rocks, and late Miocene(?)-early Pliocene(?) rhyolitic volcanic rocks. Sedimentary rocks of the Late Jurassic Morrison formation, the Early Cretaceous Kootenai formation, and the Early Cretaceous lower part of the Colorado formation, crop out in the northwest part of the quadrangle. The batholithic rocks include early stage quartz monzonite, intermediate or main stage quartz monzonite and granodiorite, and late stage aplite and alaskite. The rocks of the main stage are in discontinuous layers approximately conformable to the folded Elkhorn Mountains volcanics that form the roof of the batholith, and may be part of a sill-like body rather than of a batholith in the classic sense. Metamorphic changes in the roof rocks are not conspicuous except in one stratigraphic unit that probably was especially susceptible to thermal reorganization. The batholithic rocks and Elkhorn Mountains volcanics are jointed, and are cut by faults that trend about east, north, N. 20° E., northeast, and northwest. The east-trending faults are most abundant, especially in the eastern part of the quadrangle, and cut only the batholithic and pre-batholithic rocks, whereas many of the faults of other trends cut Tertiary volcanic rocks and a few cut Pleistocene glacial deposits. A surface of moderate relief was cut before eruption of the Oligocene(?) volcanic rocks, and the late Miocene(?)-early Pliocene(?) volcanic rocks covered a deeply weathered surface of low relief. By the Pleistocene a landscape essentially like that of today had been formed, and during the one period of Pleistocene glaciation, valley glaciers and a mountain ice sheet modified the earlier landforms and left extensive deposits of till and outwash. These deposits have been modified in many places by mass-wasting processes that have dominated post-glacial erosion. Mineral deposits in the quadrangle include deposits of disseminated auriferous pyrite, base- and precious-metal bearing quartz veins that occupy the east-trending fault zones, placer deposits of gold and tin, and a few non-metallic deposits, chiefly stone, gravel, and dumortierite. Nearly all of the metallic minerals mined in the quadrangle have come from the east-trending quartz veins and from the placer deposits.

Montana↗

USGS1972

Reconnaissance geology of the Precambrian rocks in the Ayn Qunay quadrangle, Kingdom of Saudi Arabia

The Aya Qunay quadrangle covers an area of 2833 sq km in central Saudi Arabia, Only the western edge of the quadrangle is underlain by Precambrian rocks, which were the subject of this investigation. Toward the east the Precambrian rocks are unconformably overlain by Permian and younger sedimentary rocks. The Permian rocks at the west edge of the Ayn Qunay quadrangle consist mainly of a granitic intrusive complex of batholithic dimensions. Parts of the eastern edge of the granitic complex are exposed just west of the overlying Khuff Formation of Permian age, where biotite-hornblende granite of the complex intrudes chlorite-sericite schist of the Precambrian Bi'r Khountina Group. The biotite-hornblende granite of the complex also intrudes plutons of diorite, gabbro, and pyroxenite and is itself intruded by granite porphyry, thereby indicating some difference in age between the granitic rocks in the complex. A sequence of metamorphosed volcanic rocks composed mainly of andesite, rhyolite, and kindred rocks, and called the Halaban Group, is older than the Bi'r Khountina Group. Relations between the Halaban and a gray hornblende-biotite granite gneiss are uncertain, but the gneiss may be older than the Halaban. The few observed contacts disclosed parallel foliation in the two units, but the foliation may have been imposed after the Halaban was deposited on the granite gneiss. Two major left-lateral faults extend west-northwest across the Precambrian rocks but are not in the Permian rocks. These faults parallel to the Najd fault zone found farther south. Seemingly they correlate in time with early movements on the Najd fault zone, but not with the latest. Saprolitic material-of variable thickness is present on the upper surface of the Precambrian rocks beneath the Khuff Formation at many places. Where the Khuff Formation has been removed by erosion, the saprolite is also stripped away. The weathering probably took place in pre-Khuff time. No ancient mines or prospects were seen in the Precambrian rocks; however, a notable positive anomaly for tungsten in concentrates is associated with a small prominence of granite porphyry 35 km southwest of Ayn Qunay. Further investigation of the porphyry should be undertaken to learn the amount of scheelite at this locality.

Open-File Report↗

USGS2009

Paleontological interpretations of crater processes and infilling of synimpact sediments from the Chesapeake Bay impact structure

Biostratigraphic analysis of sedimentary breccias and diamictons in the Chesapeake Bay impact structure provides information regarding the timing and processes of late-stage gravitational crater collapse and ocean resurge. Studies of calcareous nannofossil and palynomorph assemblages in the International Continental Scientific Drilling Program (ICDP)-U.S. Geological Survey (USGS) Eyreville A and B cores show the mixed-age, mixed-preservation microfossil assemblages that are typical of deposits from the upper part of the Chesapeake Bay impact structure. Sparse, poorly preserved, possibly thermally altered pollen is present within a gravelly sand interval below the granite slab at 1392 m in Eyreville core B, an interval that is otherwise barren of calcareous nannofossils and dinocysts. Gravitational collapse of watersaturated sediments from the transient crater wall resulted in the deposition of sediment clasts primarily derived from the nonmarine Cretaceous Potomac Formation. Collapse occurred before the arrival of resurge. Low pollen Thermal Alteration Index (TAI) values suggest that these sediments were not thermally altered by contact with the melt sheet. The arrival of resurge sedimentation is identified based on the presence of diamicton zones and stringers rich in glauconite and marine microfossils at 866.7 m. This horizon can be traced across the crater and can be used to identify gravitational collapse versus ocean-resurge sedimentation. Glauconitic quartz sand diamicton dominates the sediments above 618.2 m. Calcareous nannofossil and dinoflagellate data from this interval suggest that the earliest arriving resurge from the west contained little or no Cretaceous marine input, but later resurge pulses mined Cretaceous sediments east of the Watkins core in the annular trough. Additionally, the increased distance traveled by resurge to the central crater in turbulent flow conditions resulted in the disaggregation of Paleogene unconsolidated sediments. As a result, intact Paleogene clasts in Eyreville cores are rare, but clasts of semilithified Potomac Formation silts and clays are common.

Chesapeake Bay↗

USGS1992

Impact origin of the Avak Structure, Arctic Alaska, and genesis of the Barrow gas fields

Geophysical and subsurface geologic data suggest that the Avak structure, which underlies the Arctic Coastal Plain 12 km southeast of Barrow, Alaska, is a hypervelocity meteorite or comet impact structure. The structure is a roughly circular area of uplifted, chaotically deformed Upper Triassic to Lower Cretaceous sedimentary rocks 8 km in diameter that is bounded by a ring of anastomosing, inwardly dipping, listric normal faults 12 km in diameter. A zone of gently outward-dipping sedimentary country rocks forms a discontinuous ring of "rim anticlines" within the peripheral ring of normal faults. Beyond these anticlines, the sedimentary rocks are almost flat-lying. Basement consists of strongly deformed Ordovician and Silurian argillite. Density and acoustic impedance con rasts between the argillite and the overlying strata produce gravity and seismic-reflection signatures that define a ring of anticlines around the disturbed zone and a structural high surrounded by an annular structural low at its center. In the adjacent Barrow gas fields, the tops of the informally named Neocomian "pebble shale" unit and the gas-producing Lower Jurassic Barrow sand (local usage) lie at average subsea depths of 488 m and 670 m, respectively. In the Avak 1 well, drilled on the central high, the pebble shale and the Barrow sand lie near the surface, documenting more than 500 m of relative uplift at the high. The cores in this well have steep dips (30-90 degrees), mixed breccia with Franklinian argillite clasts 10 and 90 m above basement, quartz grains with shock mosaicism and multiple sets of shock lamellae, oriented concussion fractures in sand-size quartz grains, and shatter cones resembling those found in the peripheral zones of well-documented impact structures. In addition, above-background levels o fractured quartz grains in Barrow sand were found as far as 19 km beyond the rim of the Avak structure. Data concerning the age of the Avak structure are not definitive. If submarine landslide deposits in the upper part of the Aptian and Albian Torok Formation, in the subsurface 200 km to the east, were triggered by the Avak event, then the Avak meteorite struck a submerged marine shelf about 100 + or - 5 Ma. However, the impact features found at Avak (shatter cones, concussion fractures, shock lamellae and shock mosaicism in quartz grains, and widespread cataclasis) characterize the distal zones of meteorite impact structures. Fused rocks, plastic deformation, and shock-metamorphic minerals found in more proximal zones of impact structures are apparently missing. These observations, and the lack of Avak ejecta in cuttings and cores from the Torok Formation and Nanushuk Group (Albian to middle Cenomanian) in surrounding test wells, indicate that the impact event postdated these beds. In this case, the Avak meteorite struck a Late Cretaceous or Tertiary marine shelf or coastal plain between the Cenomanian (ca. 95 Ma), and deposition of the basal beds of the overlying late Pliocene and Quaternary Gubik Formation (ca. 3 Ma).

Alaska↗

USGS1995

Prediction of areas where irrigation drainage may induce selenium contamination of water

The U.S. Department of the Interior has investigated 25 areas in the western USA to determine whether irrigation drainage has caused harmful effects on wildlife or has reduced subsequent beneficial uses of the water. A database of chemical analyses of water, sediment, and biota from the 25 areas was created and supplemented with geologic, climatologic, and hydrologic data. The data were evaluated to identify common features among study areas and principal factors that result in Se contamination of water in lakes, ponds, and streams downgradient of irrigated areas. From the analysis of data, a decision tree that uses readily available geologic, climatologic, and hydrologic data was derived for use by resource managers as a screening tool to predict the likelihood that irrigation drainage will result in Se contamination in areas of the western USA. Irrigation in areas that are not associated with marine sedimentary rocks of late Cretaceous age is unlikely to cause Se contamination. Irrigation in very arid areas that are associated with these Cretaceous sediments is almost certain to cause Se contamination if the irrigation water drains to terminal lakes and ponds. The likelihood that an area will be contaminated with Se because of irrigation drainage can change, particularly with changes in precipitation. During normal or wet periods, Se contamination may not occur in an area, even though it has seleniferous soils, but reduced water deliveries during a drought in such an area may result in Se contamination.

Journal of Environmental Quality↗

USGS1980

Geology and mineral resources of the North Absaroka Wilderness and vicinity, Park County, Wyoming, with sections on mineralization of the Sunlight mining region and geology and mineralization of the Cooke City mining district, and a section on aeromagnetic interpretation

SUMMARY The North Absaroka Wilderness is approximately 560 square miles (1,450 km 2 ) of rugged scenic mountainous terrain that adjoins the eastern boundary of Yellowstone National Park in northwestern Wyoming. The area was studied during 1970, 1971, and 1972 by personnel of the U. S. Geological Survey and the U. S. Bureau of Mines to evaluate its mineral-resource potential as required by the Wilderness Act of 1964. This evaluation is based on a search of the literature courthouse and production records, geologic field mapping, field inspection of claims and prospects, analyses of bedrock and stream-sediment samples, and an aeromagnetic survey. The North Absaroka Wilderness is underlain almost entirely by andesitic and basaltic volcanic rocks of Eocene age. These volcanics rest on deformed sedimentary rocks of Paleozoic and, locally, of Mesozoic age that are exposed at places along the northern and eastern edges of the wilderness. Dikes and other igneous intrusive bodies cut both the volcanic and sedimentary rocks. A nearly flat detachment fault, the Heart Mountain fault, and a related steep break-away fault have displaced middle and upper Paleozoic rocks and some of the older part of the volcanic sequence to the southeast. A much greater thickness of volcanic rocks was found to be involved in Heart Mountain faulting than had previously been recognized; however, most of the volcanic rocks and many of the intrusives were emplaced after Heart Mountain faulting. Local folding and high-angle faulting in mid-Eocene time have deformed all but the youngest part of the volcanic sequence in the southeastern part of the wilderness. This deformation is interpreted as the last pulse of Laramide orogeny. The results of this study indicate that the mineral-resource potential of the wilderness is minimal. Bentonite, petroleum, low-quality coal, and localized deposits of uranium and chromite have been produced in the surrounding region from rocks that underlie the volcanic rocks; but such deposits, if present in the wilderness, would be too deeply buried, too small, or too sporadically distributed to be profitably located and exploited. Copper and gold mines and prospects are present on the fringes of the wilderness, but otherwise the area seems to be devoid of economically valuable concentrations of metallic minerals. No surface evidence of geothermal-energy potential was found. Known mineral deposits in the vicinity of the North Absaroka Wilderness are associated with intrusive rocks. From the Cooke City mining district, just north of the wilderness, replacement deposits in Upper Cambrian carbonate rocks may extend a short distance into the north edge of the wilderness, In the Sunlight mining region, an enclave nearly surrounded by the wilderness, mineralization occurs in veins and is disseminated in volcanic and plutonic rocks. Richer concentrations of metallic minerals may occur in carbonate rocks adjacent to intrusive bodies at depth beneath the volcanic rocks in the Sunlight region. A few small intrusive bodies occur in the wilderness, but no significant associated mineralization was detected. Aeromagnetic data indicate that other intrusives not exposed by erosion may occur in the wilderness; however, no significant metamorphism or alteration is evident at the surface to indicate their presence. Although most of the rocks of the wilderness are of igneous origin, they are all so old (Eocene) that it is unlikely that they retain any original heat. The Pleistocene rhyolitic ash-flow tuffs in the southwestern part of the wilderness were erupted from sources in Yellowstone National Park just to the west; however, in the wilderness these tuffs are too thin to contain any residual heat.

Wyoming↗

USGS1983

Mineral resource potential map of the Spanish Peaks Wilderness Study Area, Huerfano and Las Animas counties, Colorado

A geologic and geochemical investigation and a survey of mines and prospects have been conducted to evaluate the mineral resource potential of the Spanish Peaks Wilderness Study Area, Huerfano and Las Animas Counties, in south-central Colorado. The·study area is underlain by sedimentary rocks of Paleozoic to Tertiary age (Johnson, 1969). Stocks and dikes were emplaced between 20 and 25 m.y. ago (Smith, 1979) forming East and West Spanish Peaks and the White Peaks. Most of the study area lacks significant geochemical anomalies and has a low mineral potential. Anomalous concentrations of gold, silver, copper, lead, and zinc in the rocks and drainage basins in the vicinity of the old mines and prospects on West Spanish Peak indicate a moderate potential for small mineralized veins in this area. Ore-bearing veinlets have been worked in the past, primarily for silver and lead; however, the sparsity, small size, and low grade of the veins diminish their significance. The depth of several thousand feet at which coal may underlie the surface rocks of the study area makes it a resource with little likelihood of development. The potential for oil and gas appears low because of the apparent lack of structural traps and the intense igneous activity in the area.

Colorado↗

USGS2010

Magnetotelluric data, Taos Plateau Volcanic Field, New Mexico

The population of the San Luis Basin region of northern New Mexico is growing. Water shortfalls could have serious consequences. Future growth and land management in the region depend on accurate assessment and protection of the region's groundwater resources. An important issue in managing the groundwater resources is a better understanding of the hydrogeology of the Santa Fe Group and the nature of the sedimentary deposits that fill the Rio Grande rift, which contain the principal groundwater aquifers. The shallow unconfined aquifer and the deeper confined Santa Fe Group aquifer in the San Luis Basin are the main sources of municipal water for the region. The U.S. Geological Survey (USGS) is conducting a series of multidisciplinary studies of the San Luis Basin. Detailed geologic mapping, high-resolution airborne magnetic surveys, gravity surveys, an electromagnetic survey called magnetotellurics (MT), and hydrologic and lithologic data are being used to better understand the aquifers. This report describes a regional east-west MT sounding profile acquired in late July 2009 across the Taos Plateau Volcanic Field where drillhole data are sparse. Resistivity modeling of the MT data can be used to help map changes in electrical resistivity with depths that are related to differences in rock types. These various rock types help control the properties of aquifers. The purpose of this report is to release the MT sounding data collected along the east-west profile. No interpretation of the data is included.

Open-File Report↗

USGS2014

Geologic map and upper Paleozoic stratigraphy of the Marble Canyon area, Cottonwood Canyon quadrangle, Death Valley National Park, Inyo County, California

This geologic map and pamphlet focus on the stratigraphy, depositional history, and paleogeographic significance of upper Paleozoic rocks exposed in the Marble Canyon area in Death Valley National Park, California. Bedrock exposed in this area is composed of Mississippian to lower Permian (Cisuralian) marine sedimentary rocks and the Jurassic Hunter Mountain Quartz Monzonite. These units are overlain by Tertiary and Quaternary nonmarine sedimentary deposits that include a previously unrecognized tuff to which we tentatively assign an age of late middle Miocene (~12 Ma) based on tephrochronologic analysis, in addition to the previously recognized Pliocene tuff of Mesquite Spring. Mississippian and Pennsylvanian rocks in the Marble Canyon area represent deposition on the western continental shelf of North America. Mississippian limestone units in the area (Tin Mountain, Stone Canyon, and Santa Rosa Hills Limestones) accumulated on the outer part of a broad carbonate platform that extended southwest across Nevada into east-central California. Carbonate sedimentation was interrupted by a major eustatic sea-level fall that has been interpreted to record the onset of late Paleozoic glaciation in southern Gondwana. Following a brief period of Late Mississippian clastic sedimentation (Indian Springs Formation), a rise in eustatic sea level led to establishment of a new carbonate platform that covered most of the area previously occupied by the Mississippian platform. The Pennsylvanian Bird Spring Formation at Marble Canyon makes up the outer platform component of ten third-order (1 to 5 m.y. duration) stratigraphic sequences recently defined for the regional platform succession. The regional paleogeography was fundamentally changed by major tectonic activity along the continental margin beginning in middle early Permian time. As a result, the Pennsylvanian carbonate shelf at Marble Canyon subsided and was disconformably overlain by lower Permian units (Osborne Canyon and Darwin Canyon Formations) representing part of a deep-water turbidite basin filled primarily by fine-grained siliciclastic sediment derived from cratonal sources to the east. Deformation and sedimentation along the western part of this basin continued into late Permian time. The culminating phase was part of a regionally extensive late Permian thrust system that included the Marble Canyon thrust fault just west of the present map area.

California↗

USGS2008

Aquifer Tests and Characterization of Transmissivity, Ada-Vamoosa Aquifer on the Osage Reservation, Osage County, Oklahoma, 2006

The Ada-Vamoosa aquifer of northeastern Oklahoma is a sedimentary bedrock aquifer of Pennsylvanian age that crops out over 800 square miles of the Osage Reservation. The Osage Nation needed additional information regarding the production potential of the aquifer to aid them in future development planning. To address this need, the U.S. Geological Survey, in cooperation with the Osage Nation, conducted a study of aquifer properties in the Ada-Vamoosa aquifer. This report presents the results of the aquifer tests from 20 wells in the Ada-Vamoosa aquifer and one well in a minor aquifer east of the Ada-Vamoosa outcrop on the Osage Reservation. Well information for 17 of the 21 wells in this report was obtained from the Indian Health Service. Data collected by the U.S. Geological Survey during this investigation are pumping well data from four domestic wells collected during the summer of 2006. Transmissivity values were calculated from well pumping data or were estimated from specific capacity values depending on the reliability of the data. The estimated transmissivity values are 1.1 to 4.3 times greater than the calculated transmissivity values. The calculated and estimated transmissivity values range from 5 to 1,000 feet squared per day.

Scientific Investigations Report↗

USGS1962

Geology and ground-water resources of the Ahtanum Valley, Yakima County, Washington

The Ahtanum Valley covers an area of about 100 square miles in an important agricultural district in central Yakima County, Wash. Because the area is semiarid, virtually all crops require irrigation. Surface-water supplies are inadequate in most of the area, and ground water is being used increasingly for irrigation. The purpose of this investigation was the collection and interpretation of data, pertaining to ground water in the area as an aid in the proper development and management of the water resources. The occurrence and movement of ground water in the Ahtanum Valley are directly related to the geology. The valley occupies part of a structural trough (Ahtanum-Moxee subbasin) that is underlain by strongly folded flow layers of a thick sequence of the Yakima basalt. The upper part of the basalt sequence interfingers with, and is conformably overlying by, sedimentary rocks of the Ellensburg formation which are as much as 1,000 feet thick. These rocks are in turn overlying unconformably by cemented basalt gravel as much as 400 feet thick. Unconsolidated alluvial sand and gravel, as much as 30 feet thick, form the valley floor. Although ground water occurs in each of the rock units within the area, the Yakima basalt and the unconsolidated alluvium yield about three-fourths of the ground water currently used. Wells in the area range in depth from a few feet to more than 1,200 feet and yield from less than 1 to more than 1,030 gallons per minute. Although water levels in water-table wells usually are shallow--often less than 5 feet below the land surface--levels in deeper wells tapping confined water range from somewhat above the land surface (in flowing wells) to about 200 feet below. Wells drilled into aquifers in the Yakima basalt, the Ellensburg formation, and the cemented gravel usually tap confined water, and at least 12 wells in the area flow or have flowed in the past. Ground-water levels fluctuate principally in response to changes in stream levels, variations in the flow of irrigation ditches and in rates of water application, variations in local precipitation, and seasonal differences in withdrawals from wells. Annual fluctuations of levels generally are less than 10 feet except in localities of heavy pumping. Periodic measurements of water levels in two observation wells in the area indicate, locally at least, a persistent decline in artesian pressures in confined basalt aquifers, although the record is too short to show whether withdrawal by pumping has reached, or is nearing, an optimum balance with recharge. The aquifers are recharged by precipitation, by infiltration from streams, and by ground-water underflow into the area. Ground water is discharged by seepage to streams, by evapotranspiration, by springs and seeps at the land surface, and, artificially, by withdrawal from wells. It is estimated that the seepage discharge to the Yakima River from the area studied may range from about 20,000 to 25,000 acre-feet per year. The consumptive waste of ground water by phreatophytes probably exceeds 4,000 acre-feet per year and may represent a large reclaimable source of water in the area. The annual withdrawal of ground water from wells in the area for domestic, industrial, irrigation, public, and stock supplies is estimated to be 6,300 acre-feet. The chemical quality of the ground water generally is satisfactory for most purposes, although the water from many wells is harder than is desirable for domestic use.

Washington↗

USGS1965

Structural geology of aconcagua province and its relationship to the central Valley Graben, Chile

Aconcagua Province is herein divided into three major structural provinces which, for the sake of simplicity, are named the Coastal Cordillera, Central Valley graben , and Andean Cordillera structural provinces to correspond to the three geomorphic provinces recognized farther south. The coastal structural province includes the Coastal Cordillera which is underlain mainly by layered sedimentary and effusive rocks that strike north and dip homoclinally to the east, range from Triassic to Late Cretaceous in age, and are intruded by Cretaceous granodioritic and dioritic rocks. Igneous and metamorphic rocks largely of Paleozoic age comprise the western coastal margin, Along the eastern edge of the province is the Los Angeles fault zone, a wide, poorly defined band of semiparallel, arcuate faults which show downward displacement to the east and which appear to have resulted mainly from intrusion and uplift on the west. The Coastal Cordillera, therefore, may be considered a large horst with an intrusive granodiorite core. The Central Valley graben is bounded on the west by the Los Angeles fault zone and on the east by the Pocuro fault zone. Between these two fault zones is an area 20-30 km wide in which volcanic rocks of Late Cretaceous age are flat lying to gently folded and block faulted. In places, pipelike stocks of andesitic to dioritic igneous rock intrude the area. The Pocuro fault zone is a prominent lineament that marks the eastern limit of the Central Valley at Santiago and has been traced northward for 150 km. It may, however, have a mappable length of more than 1200 km. Vertical displacement downward to the west has been measured near Los Andes to be at least 2000 m. Consequently, this fault zone may rank among the major faults of the world. The Andean structural province is subdivided into the Las Ollas and Juncal subprovinces. The Las Ollas is a mountainous front range that lies east of the Pocuro fault and extends eastward for about 25 km. Upper Cretaceous volcanic strata are gently warped into broad, open, north-trending folds, with local sharp flexures and faulted mainly by normal faults. The eastern part of the subprovince is cut by a narrow belt of Tertiary plutonic rocks, some of which are associated with porphyry copper deposits. The Juncal structural subprovince extends eastward into Argentina. It is typified by close, overturned folding, vertical bedding, and thrust faulting. In general, structural deformation increases in intensity from west to east, with imbricate overthrusting to the east in Argentina. Present evidence indicates that major graben formation began during early Tertiary (pre-Miocene) time as a result of tensional stress developed by strain release of earlier compressional forces that folded the Andes. Post-Miocene uplift of the central Andean region renewed tensional stress and opened deep-seated, north-striking fractures and reinitiated volcanism. Most of the active volcanos of Chile may be aligned along such fractures.

Geological Society of America Bulletin↗