USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the American Water Resources Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 66Linked to original sources
USGS2026

Ground motions from finite faults with unknown geometry

Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.

Bulletin of the Seismological Society of America↗
USGS2026

High‐resolution surface deformation and slip distribution observations for the 2023 Kahramanmaraş, Türkiye, earthquake sequence help constrain the rupture process

Splay, or branch, faults are a common geometric feature of earthquake surface ruptures and may provide constraints on the rupture behavior of an earthquake. The 2023 M w 7.8 Pazarcık and M w 7.5 Elbistan, Türkiye, earthquakes are examples of ruptures with multiple small splays, and the Pazarcık earthquake nucleated on a splay fault, the Narlı fault, before rupturing bilaterally on the East Anatolian fault (EAF). Here, we present 3‐m‐resolution surface displacement from subpixel correlation of Planet Dove optical images for the entirety of both ruptures with corresponding surface slip distributions. For a 30‐km‐long study region spanning the Narlı‐EAF intersection, we compare surface slip derived from five data sets with different resolutions (on‐the‐ground, WorldView, Planet Dove, Sentinel‐2, and Sentinel‐1) to elucidate complementary information. In addition, we integrate information from the surface expression of faulting with published dynamic rupture simulations and rupture process studies to constrain a rupture evolution for the Pazarcık earthquake that is consistent across data sets. This work highlights the complementary nature of disparate surface slip data sets and the role that high‐resolution surface displacement information, including from fault splays, can play in constraining nonunique rupture models and refining understanding of the earthquake rupture process.

Bulletin of the Seismological Society of America↗
USGS2024

Getting to the surface of the problem: A dynamic rupture benchmark for shallowly dipping faults near Earth’s surface

The Statewide California Earthquake Center (SCEC) Dynamic Rupture Group workshop “Getting to the Surface of the Problem: A Dynamic Rupture Benchmark for Shallowly-Dipping Faults Near Earth’s Surface” was convened virtually, in an online meeting on November 4, 2024. 52 people participated, including two who sent pre-recorded lightning talks earlier, but were unable to join us that day due to the international time-zone difference. One-half of our participants were students or postdocs, and the group included scientists from 11 countries (USA, Canada, China, Czech Republic, France, Germany, Iceland, Japan, New Zealand, Saudi Arabia, Switzerland).

Final Report↗
USGS2024

Status and performance of the ShakeAlert® earthquake early warning system: 2019-2023

The U.S. Geological Survey (USGS)‐operated ShakeAlert® system is the United States West Coast earthquake early warning system ( Given et al. , 2018 ). In this study we detail ShakeAlert’s performance during some of the largest events seen by the system thus far. Statewide public alerting using ShakeAlert messages was authorized in California in October 2019. Over the next few years, public alerts were expanded into Oregon and then into Washington ( U.S. Geological Survey, 2024 ). ShakeAlert source results are routinely compared to the USGS Comprehensive Catalog (ComCat; Guy et al. , 2015 ; U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which contains the earthquake location and magnitude determined using complete waveform data. M 4.5 and larger is the threshold used for public alerting and was deliberately set below the level where damage is likely to compensate for cases where the system underestimates the magnitude. Between 17 October 2019 and 1 September 2023, the ShakeAlert system created 95 events with maximum magnitude estimates of M ≥4.5, the public alerting threshold. 94 of the 95 events were due to real earthquakes. Seven were categorized “false” per ShakeAlert’s internal definition that there was no matching catalog event within 100 km and 30 s of origin time; however, all but one of these were real earthquakes that were poorly located, primarily because they were at the edges of the seismic network. Three detected events were labeled “missed” because they were very poorly located (>100 km location error). In addition, the system did not produce solutions for four ComCat events M ≥4.5 ( U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which were all at the edge of the alerting and network boundaries. The ShakeAlert system has accurately detected the majority of earthquakes that have occurred within the operational region since completing the public rollout, and alerts from the system have been delivered to millions of cell phone users throughout the West Coast.

California, Oregon, Washington↗
USGS2024

Geophysical constraints on continental rejuvenation in central China: Implications for outward growth of the Tibetan Plateau

Continental rejuvenation results from the tectonic reactivation of crustal structures and lithospheric reworking by mantle flow. Geochemical observations and field mapping have traditionally provided the primary evidence for the secular evolution of crustal composition and tectonic processes during continental rejuvenation. Nonetheless, the impact of continental rejuvenation on the observed present-day strain rate and orogenic-scale lithospheric structure has not been well constrained. The pre-existing E-W–trending Central China Orogenic Belt has been overprinted by the N-S–trending Central Longitudinal Seismic Belt and constitutes the intracontinental West Qinling Syntaxis in central China, where the tectonic setting changes eastward from contraction to extension. Combining updated global positioning system data and high-resolution crustal seismic tomography, we reveal a modern continental rejuvenation process within the West Qinling Syntaxis in central China. The northward extrusion of the Tibetan Plateau's weak lithospheric layer (middle-lower crust and lithospheric mantle) of southwestern China relative to the rigid Sichuan Basin/Ordos Block of the eastern West Qinling Syntaxis results in regional dextral shearing that shapes the Central Longitudinal Seismic Belt and defines the eastern Tibetan Plateau margin. The pre-existing E-W–trending Central China Orogenic Belt has been preserved above the brittle-ductile transition zone, and the northward movement of the deep lithospheric layer drives the deformation of the upper crust in the West Qinling Syntaxis. Our results, along with previous studies, suggest the presence of an intracontinental lithospheric interchange structure in central China. The continental rejuvenation of the West Qinling Syntaxis results from a combination of fault reactivation in the upper crust (Stage I, Eocene–Oligocene) and reworking of the deep lithosphere (Stage II, middle–late Miocene) related to the plateau-wide shift in stress accommodation ultimately driven by the redistribution of mass outward from the central Tibetan Plateau. At present, the transition zone between the high- and low-velocity anomalies along the Central Longitudinal Seismic Belt not only shapes the landscape boundary but controls the size and recurrence interval of earthquakes within the West Qinling Syntaxis in central China.

GSA Bulletin↗
USGS2024

Timing and geometry of the Chemehuevi Formation reveal a late Pleistocene sediment pulse into the Lower Colorado River

The Chemehuevi Formation is a distinctive 50−150-m-thick wedge-shaped Pleistocene sedimentary unit deposited by the Colorado River. It lines the perimeters of the river’s floodplains and bedrock canyons for more than 600 km between the mouth of the Grand Canyon and the delta region in the Gulf of California. The formation is composed of a basal tan to light-yellowish-brown and pale-orange mud-dominated facies overlain and interbedded by a light-yellow-brown sand-dominated facies. The unit is one of two extensively exposed aggradational packages in the Lower Colorado River corridor, in addition to a series of other smaller alluvial terrace deposits. The Chemehuevi Formation appears to represent the response of a fully integrated Colorado River system to a significant perturbation, in contrast to the Bullhead Alluvium, which is likely a unique result of Pliocene river integration. The aggradation of the Chemehuevi Formation in the Lower Colorado River corridor may be similarly due to a unique event in the Colorado River system, or it may instead be a well-preserved sedimentary sequence recording typical behavior of the Colorado River below the Grand Canyon in the late Pleistocene. As such, multiple causal mechanisms have been proposed, but no study to date has conclusively explained the Chemehuevi Formation. To help resolve its timing, duration, and origin, we applied post-infrared infrared stimulated luminescence, carbonate U-Th series, and zircon sensitive high-resolution ion microprobe U-Th series geochronology to determine the ages of key exposures of the unit over a wide spatial area. These new data demonstrate that the Chemehuevi Formation was deposited ca. 110−90 ka. The depositional ages collectively overlap, suggesting that deposition occurred rapidly relative to the resolution of the geochronometers. The new depositional timing coincides with a shift from glacial to interglacial conditions after the marine isotope stage 5-6 transition. This observation is consistent with a climate-induced sediment pulse as a causal mechanism, yet correlations with similar deposits in the Colorado River headwaters or in neighboring catchments appear elusive. Potentially, climate transitions between glacial and interglacial periods induced a sediment pulse from hillslopes of the Colorado River system that resulted in the Chemehuevi Formation. An alternative or additional explanation is that the Chemehuevi Formation represents release of lava dam−impounded sediment in the Grand Canyon. The surface geometry of the Chemehuevi Formation projects upstream to the approximate location of lava dams, and the largest possible lava dam impoundment (the Upper Prospect dam) is comparable in volume to the formation. The lava dam hypothesis appears to be a possible explanation for the Chemehuevi Formation. However, tying deposition to a specific lava dam or series of lava dams remains challenging due to discrepancies in timing and volume. The combined effects of a series of lava dams may have led to the Chemehuevi Formation, as the last Pleistocene lava dam eruption coincides with the onset of deposition. Alternatively, the formation may result from the combined effects of both regional climate transitions and the lava dams that created a transient reservoir to compound a climate transition−driven sediment pulse. The geochronologic data presented here do not allow us to distinguish between the lava dam or climate transition hypotheses but will need to be reconciled with any future proposed depositional model.

Arizona, California, Nevada↗
USGS2025

Geochemical evidence for the origin of late Quaternary loess, Seward Peninsula, Alaska

Loess is the most widespread surficial deposit in the state of Alaska. Although loess of last glacial age is common in mid-continental North America, records of last glacial loess in Alaska have been elusive. Here we report a record of last glacial loess on the Seward Peninsula, along with studies of a transect of loess localities also thought to date to the last glacial period. Highly diverse hypotheses on the origin of loess on the Seward Peninsula include local volcanic rocks and mountain ranges to the north and south, as well as offshore deposits. We present particle size and mineralogical and geochemical data that indicate that the most likely sources for loess in this part of eastern Beringia are glaciogenic silt particles of the Kobuk River and Noatak River, both of which drain the Brooks Range to the northeast. Northeasterly paleowinds were therefore responsible for loess on the Seward Peninsula. Such winds probably occurred during late summer or early autumn, when river discharge was at a minimum but temperatures were still above freezing. Northeasterly winds during the last glacial period are in good agreement with a recent paleoclimate model.

Alaska↗
USGS2024

A history of cryohydrogeology modeling and recent advancements through the integration of solute transport

Groundwater flow systems and permafrost are interrelated because permafrost thaw enhances permeability, while groundwater flow can advect heat and accelerate permafrost thaw (McKenzie et al. 2021). Given amplified climate change in cold regions, there is renewed interest in ‘cryohydrogeology’, the study of groundwater in cold regions. Many data-driven studies have shown that permafrost thaw is leading to activated aquifers and increased baseflow across the pan-Arctic region (e.g. Walvoord and Striegl 2007, Evans et al. 2020). Empirical evidence of a subsurface ‘replumbing’ (Walvoord and Kurylyk 2016) in permafrost regions raises questions about the fate of sequestered contaminants in the North (Langer et al. 2023). We will discuss the history of and emerging opportunities in cryohydrogeological modeling, with a focus on recent contaminant transport modeling.

Conference Paper↗
USGS2025

A newly identified creeping strand of the Concord fault, San Francisco Bay Area

The Concord fault constitutes a major branch of the Pacific–North America transform plate boundary in Northern California, bridging the strike‐slip Bartlett Springs ‐ Green Valley Fault system to the north with the Greenville and Calaveras Faults to the south. Like many faults in the San Francisco Bay Area its long‐term slip is partially accommodated by aseismic slip (creep). Although creep has been recognized and monitored on the northern half of the fault for decades, the precise location of the southern half of the fault and its slip rate—whether accommodated seismically or aseismically—has remained enigmatic. How slip transfers between the Concord and Greenville or Calaveras faults to the south remains an outstanding question. New field observations presented here indicate that the active trace of the fault south of downtown Concord is not where previously interpreted and is indeed actively creeping. We report observations of shallow creep continuing >7 km farther south along the Concord fault than previously reported, along a fault strand not previously recognized for most of its length. This is evident as right‐laterally deflected concrete curbs and sidewalk slabs on both sides of every street that crosses the fault at a high angle in southeast Concord and northeast Walnut Creek. We document the magnitude and location of these deflections to estimate accumulated right‐lateral aseismic slip expressed in engineered structures. Offsets of these piercing lines range from 8 to 18 cm, over widths varying from narrow breaks along centimeter‐scale concrete joints to 10‐m‐wide zones of deflection. Significantly, this active trace is ∼400 m west of where the Quaternary active trace has previously been inferred, placing it within—rather than bounding—the built area of suburban Concord. Slip along the fault has already caused infrastructure damage. These results revise our understanding of the southern Concord fault and help constrain its seismic potential.

California↗
USGS2025

Earthquake stress drop, source spectra from laboratory experiments, and the apparent unsteadiness of frictional slip

Over a range of co-seismic total energy release, high sample rate slip, stress, and slip velocity measurements were made during frictional failure to determine seismic source properties. The near-field measurements were used to estimate stress drops using spectral approaches that are analogous to the standard seismological moment-corner determined Δσ and acceleration amplitude Δσ arms stress drops. Rapid frictional sliding produces slip velocity amplitude spectra that vary with frequency -1 so long as the energy dissipated by friction approaches the total energy release. Under these conditions Δσ and Δσ arms are similar in size. Since these are nearly direct measurements of fault slip velocity and because they produce flat acceleration spectra between the corner and an apparent fmax, friction in these experiments seems to produce dynamic acceleration and deceleration at all resolved frequencies. The physical origin of this unsteady motion is not known exactly but likely reflects rapid dynamic variations in fault strength or applied stress. On the other hand, when the total energy stored prior to failure is artificially made somewhat larger relative to that which can be dissipated by friction the velocity spectra vary with frequency -2 immediately below the corner. At these conditions Δσ and Δσ arms diverge. The excess stored energy is preferentially partitioned into radiated energy upon failure. Collectively the experiments imply that to produce unsteady, white noise accelerations that are observed for natural earthquakes, requires that at least 95% of the energy released does not escape the source region to be radiated to the far-field.

Bulletin of the Seismological Society of America↗
USGS2024

Deep structure of Siletzia in the Puget Lowland: Imaging an obducted plateau and accretionary thrust belt with potential fields

Detailed understanding of crustal components and tectonic history of forearcs is important due to their geological complexity and high seismic hazard. The principal component of the Cascadia forearc is Siletzia, a composite basaltic terrane of oceanic origin. Much is known about the lithology and age of the province. However, glacial sediments blanketing the Puget Lowland obscure its lateral extent and internal structure, hindering our ability to fully understand its tectonic history and its influence on modern deformation. In this study, we apply map-view interpretation and two-dimensional modeling of aeromagnetic and gravity data to the magnetically stratified Siletzia terrane revealing its internal structure and characterizing its eastern boundary. These analyses suggest the contact between Siletzia (Crescent Formation) and the Eocene accretionary prism trends northward under Lake Washington. North of Seattle, this boundary dips east where it crosses the Kingston arch, whereas south of Seattle the contact dips west where it crosses the Seattle uplift (SU). This westward dip is opposite the dip of the Eocene subduction interface, implying obduction of Siletzia upper crust at this southern location. Elongate pairs of high and low magnetic anomalies over the SU suggest imbrication of steeply-dipping, deeply rooted slices of Crescent Formation within Siletzia. We hypothesize these features result from duplication of Crescent Formation in an accretionary fold-thrust belt during the Eocene. The active Seattle fault divides this Eocene fold-thrust belt into two zones with different structural trends and opposite frontal ramp dips, suggesting the Seattle fault may have originated as a tear fault during accretion.

Washington↗
USGS2023

Surficial geologic map of the Owlshead Mountains 30' x 60' quadrangle, Inyo and San Bernardino Counties, California

The surficial geologic map of the Owlshead Mountains 30' x 60' quadrangle depicts the distribution and characteristics of surficial-deposit materials and neotectonic deformation for an area of approximately 5,000 square kilometers (km 2 ) located in the western Basin and Range Province of eastern California. The map represents a new compilation of the surficial geology that encompasses deposits within the late Pliocene to Quaternary. The map is based primarily on new mapping conducted between 2001 and 2009. Map compilation was supported by field observations distributed across the map area, combined with reference to several published and unpublished mapping sources that mostly emphasized neotectonic deformation. The surficial-deposit units included in the map follow a classification scheme that systematically denotes depositional process, relative age, and any secondary sedimentologic or morphologic characteristics. Identification, correlation, and age estimation of map units are based primarily on the relative degree of development of certain time-dependent characteristics such as surface morphology, including local dissection and surface preservation, surface clast modification, and degree of soil development; these characteristics are implicitly incorporated into unit designations. The map represents a detailed and regionally uniform synthesis of the late Neogene geology for this large area that provides a framework applicable to many interpretative studies, such as regional patterns of deposition and dissection; surface drainage development and evolution; and the distribution, style, and timing of neotectonic deformation.

California↗
USGS2024

Thick- and thin-skinned contractional styles and the tectonic evolution of the northern Sangre de Cristo Mountains, Colorado, USA

The Sangre de Cristo Mountains of southern Colorado and northern New Mexico, USA, contain an unusual combination of thick- and thin-skinned contractional structures involving both basement and cover rocks in the Laramide Rocky Mountain foreland. These structures are truncated by down-faulted extensional basins to the east and west. Together with synorogenic sediments, these structures preserve a record of the rise of the Ancestral Rocky Mountains, the Laramide orogeny, and Rio Grande rifting. Laramide structures within the mountains provide clues to processes that link the three events and to necessary conditions for thin-skinned and thick-skinned contractional structures to form together in continental interiors. To examine the full variety of structural styles, a portion of the northern Sangre de Cristo fold- and-thrust belt in Colorado was described and interpreted using geologic maps and structural cross-sections. Stratigraphic relations of the Ancestral Rocky Mountain highlands and basin fill were reconstructed from existing maps. These relations allow identification of faults inherited from the Ancestral Rocky Mountains, differentiation of thrust sheets, and in some cases, estimation of the magnitude of displacement. To examine relations between Laramide thrusts and Rio Grande rifting, kinematic data were collected from a thrust fault adjacent to rift faults. Three thrust fault styles were recognized: thin-skinned basement, thin-skinned cover rocks, and thick-skinned basement. Thin-skinned thrusts arising from a hinterland beneath the present San Luis Valley carried sheets of Proterozoic basement rocks northeast over a Laramide foreland. These basement thrusts are interpreted to be faults of the Ancestral Rocky Mountains that reactivated during the Laramide orogeny. The Laramide foreland consists of thin-skinned thrusts and folds in sedimentary cover rocks as young as 49 Ma. Both thin-skinned thrusts in basement and cover rocks are bounded by thick-skinned basement thrusts that moved intermittently throughout the Laramide orogeny. We infer that thin-skinned thrusts form in continental interiors where deformation is focused in weak strata of thick basin fill and in fluid-reaction weakened preexisting faults in basement rocks. Both conditions are met in the Sangre de Cristo Mountains. Basement thrusts adjacent to the San Luis Valley contain evidence of plastic contractional microstructures overprinted by extensional microstructures that may record the transition from Laramide contraction to Rio Grande extension of the crust.

Colorado↗
USGS2024

The impact of source time function complexity on stress drop estimates

Earthquake stress drop—a key parameter for describing the energetics of earthquake rupture—can be estimated in several different, but theoretically equivalent, ways. However, independent estimates for the same earthquakes sometimes differ significantly. We find that earthquake source complexity plays a significant role in why theoretically (for simple rupture models) equivalent methods produce different estimates. We apply time‐ and frequency‐domain methods to estimate stress drops for real earthquakes in the SCARDEC (Seismic source ChAracteristics Retrieved from DEConvolving teleseismic body waves, Vallée and Douet, 2016 ) source time function (STF) database and analyze how rupture complexity drives stress‐drop estimate discrepancies. Specifically, we identify two complexity metrics—Brune relative energy (BRE) and spectral decay—that parameterize an earthquake’s complexity relative to the standard Brune model and strongly correlate with the estimate discrepancies. We find that the observed systematic magnitude–stress‐drop trends may reflect underlying changes in STF complexity, not necessarily trends in actual stress drop. Both the decay and BRE parameters vary systematically with magnitude, but whether this magnitude–complexity relationship is real remains unresolved.

Bulletin of the Seismological Society of America↗
USGS2025

Cave records reveal recent origin of North America’s deepest canyon

We explore how and when Hells Canyon, North America’s deepest river gorge (~2,400 m deep), formed, addressing these fundamental questions first posed by W. Lindgren [ The Gold Belt of the Blue Mountains of Oregon (1901)]. Existing hypotheses about the canyon’s formation and timing of incision remain speculative due to a lack of direct constraints and geomorphic analysis in the canyon. Herein, we combine cosmogenic nuclide dating of cave-bound river deposits, river profile analysis, and numerical modeling to provide the first direct age constraints and systematic analysis of incision processes at work in Hells Canyon. Our study reveals a significant drainage capture triggered rapid incision at ~2.1 ± 1.0 Ma, establishing the Snake River’s modern route into the Columbia River system. The increased drainage area and subsequent increase in stream power resulted in the rapid incision of Hells Canyon and the formation of tributary knickpoints (KPs) that decrease in elevation away from the capture location. Cosmogenic dating of cave deposits indicates incision rates increased from ~0.01 to ~0.16 mm y −1 . Numerical modeling of the stream capture supports these observations, demonstrating how abrupt drainage area increase drives rapid river incision. Our findings from Hells Canyon provide a well-constrained example of how drainage capture can dramatically shape the evolution of a major river gorge.

Idaho, Oregon, Washington↗
USGS2025

Pre-Acadian tectonics of the eastern Orange-Milford Belt, south-central Connecticut

This excursion presents a reinterpretation of mapping and new analytical data from the eastern Orange-Milford belt (OMB) in south-central Connecticut. The OMB is a fault-bound terrane of argillites and mafic rocks of anomalously low metamorphic grade—and of poorly constrained ages and tectonic affinity—wedged between kyanite/sillimanite-grade peri- Laurentian rocks to the west and anatectic peri-Gondwanan rocks to the east (Fig. 1A). Our data demonstrate that Ordovician(?) igneous and sedimentary rocks of the OMB were variably metamorphosed in the Ordovician and Silurian but escaped regionally pervasive, high-grade Devonian and later metamorphism. Previous interpretations (Fritts 1963a, 1965a, 1965b; Burger, 1967; Burger and others, 1968; Rodgers, 1985) described these rocks as a conformable sequence of low-grade, Ordovician to Devonian metasediments and metavolcanics. Our results reveal that the “metavolcanics” are not extrusive rocks but rather slivers of lower oceanic crust with complicated high- and low-grade metamorphic fabrics, intruded by a swarm of Silurian sheeted basalt dikes, and in fault contact with the surrounding metasediments. The purpose of this trip is to show evidence of early Paleozoic (Taconic) deformation and metamorphism preserved in rocks of the eastern OMB. These rocks remained shallow, cool, and sufficiently dry during the regionally dominant Acadian and Alleghanian orogenies to have avoided significant overprinting. As such, these rocks serve as windows into a geologic history otherwise unavailable between anatectic rocks of the peri-Gondwanan Bronson Hill, Avalon, and Gander terranes east of the Hartford basin and sillimanite-grade rocks of the peri-Laurentian Hartland and gneiss dome belts west of the OMB. We present major and trace element geochemistry including rare-earth element patterns for all mafic units in the eastern OMB as well as 40 Ar/ 39 Ar age spectra of amphibole, muscovite, and K-feldspar from rocks of the Maltby Lakes complex (of Deasy and others, 2017), Savin Schist, and Wepawaug Schist. Our evidence demonstrates that the units of the OMB have been assembled by faulting or intrusion, and that no stratigraphic relationships exist between the argillaceous schists and the metaigneous rocks.

Connecticut↗
USGS2025

Quantitative subsurface characterization illuminates the origin of the Quaternary Mississippi River Valley alluvial aquifer

The Mississippi River Valley alluvial aquifer (MRVA) is vital to U.S. food security and global agricultural supply. However, quantitative understanding of its Quaternary origin, architecture, and hydrologic function remains incomplete. Here we develop a three-dimensional hydrostratigraphic model to characterize the deposition of clay and silt, fine-medium sands, and graveliferous sands using lithologic data from 75,000 boreholes compiled across the Lower Mississippi Valley and a geostatistical method—interval kriging. We find that cyclic glacial entrenchments, evidenced by remnants of pre-Wisconsinan postglacial sediments, alongside geodynamic activities shaped the MRVA basal configuration. Stratal weakening from faulting and salt diapirism enhanced glacial incision and thereby produced abrupt aquifer thickening. We demarcate the top of graveliferous sands as the regional marker of the Pleistocene-Holocene transition. The MRVA hydrostratigraphy reveals hydrologic function and geologic controls on groundwater storage and quality, advancing the assessment of aquifer sustainability under a changing climate, with implications for alluvial aquifers globally.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗
USGS2025

Stratigraphy, structure, and geomorphology of the central Appalachians across the North Mountain fault zone near Harrisonburg, Virginia, USA

This field trip focuses on the geology of the central Appalachian Valley and Ridge province near Harrisonburg, Virginia, USA. Recent geologic mapping utilizing 1-m resolution lidar data has revealed new insights into the Paleozoic stratigraphy, structural geology, and Neogene landscape evolution of the region. The detailed mapping reveals the presence of the Big Spring Station Member and multiple thrombolite zones in the Cambrian Conococheague Formation extending as far south as the Briery Branch 7.5 min quadrangle, providing insights into Late Cambrian sea-level fluctuations. Multiple outcrop exposures in the study area of this guidebook confirm recent work in Pennsylvania, USA, showing that the Ordovician Reedsville Shale overlies the Martinsburg Formation and that the two are distinct and mappable as separate formations rather than laterally equivalent units as previously interpreted. Our work extends the Silurian Williamsport Sandstone into Shenandoah County, Virginia, and describes its facies relationships with the Bloomsburg Formation along strike and across the Adams Run anticline. Mapping within the thick Devonian siliciclastic sequence reveals the presence of the Mahantango Formation on the western limb of Supin Lick syncline and illustrates its complex facies relationship with the Millboro Shale. In addition, we highlight new mapping criteria for the Brallier and Foreknobs Formations and demonstrate how the specific changes to the placement of the contact between them addresses previous challenges in their differentiation. We present cosmogenic burial ages of broad alluvial fan sediments in the Shenandoah Valley near Timberville and Briery Branch, Virginia, and erosion rates estimated for the Briery Branch stream basin. Both analyses provide new constraints on the timing of landscape evolution and karst development since the middle Pliocene. This field guide also highlights some significant structural features within the North Mountain fault zone, such as evidence of imbricated thrust sheets cut by cross-strike faults that have been exploited by Eocene igneous intrusions. Map-scale horses of Silurian and Ordovician rocks hold up ridges that are oblique to the regional strike. Deformation internal to one of these horse blocks is shown to be non-coaxial with respect to the main regional northwest directed transport.

Virginia↗