SEARCH · USGS Science

Results for “Journal of Foraminiferal Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,660 records · Page 66Linked to original sources

USGS1976

Trace elements in some rocks and slag from the Yemen Arab Republic and their bearing on the iron ore near Sa'dah

Thirty-seven samples of rocks, saprolite, laterite, gossan, and slag were collected in the Yemen Arab Republic during June-July 1975 when field work was conducted to refine an interpretation of the regional geology made from LANDSAT-1 images by M. J. Grolier. These samples we reanalyzed in the laboratories of the U. S. Geological Survey, and the results were interpreted for use in programs of economic development as a guide for the evaluation of mineral resources in the Yemen Arab Republic. The work was undertaken as part of the program of the U. S. Agency for International Development with the cooperation of the Mineral and Petroleum Authority, Ministry of Economy, Yemen Arab Republic.

Open-File Report↗

USGS2026

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California↗

USGS1998

Stream habitat characteristics at selected sites in the Georgia-Florida coastal plain

Habitat characterization is part of a multidisciplinary approach to water-quality assessment implemented by the National Water-Quality Assessment Program. Habitat data were collected in the Georgia-Florida Coastal Plain study unit at 24 sites during 1993-95. Data were collected for habitat characteristics at three spatial scales: basin, segment, and reach. Basin data include physiography, land resource provinces, and land use, providing a description of the environmental setting at each site. Segment data include length, gradient, and sinuosity. A Kendall correlation analysis performed on segment characteristics and the log-of-basin area showed a correlation between segment gradient and the log-of-basin area and a correlation between sinuosity and segment length. Reach data consist of field-collected measurements of both instream and riparian habitats. Sand and detritus were the most common channel-bed substrates among the sampled sites. Measurements of channel width, water depth, and bank width and height were used to create cross-sectional profiles of each sampled area. Elevations of selected durations plotted on cross sections illustrated the percentage of time that the banks were inundated at each site. Sites were divided into two groups based on duration of bank inundation (less than or equal to 1 percent and greater than 1 percent). Bank woody vegetation was also sampled and a clustering algorithm known as Two-Way INdicator SPecies ANalysis (TWINSPAN) was used to analyze these data. TWINSPAN divided the sites into two groups based on their vegetation composition. A statistical comparison of the two types of site groups (duration of bank inundation and vegetation) was performed. The significant association between these groups was consistent with the hypothesis that inundation frequency affected riparian vegetation.

Florida, Georgia↗

USGS2024

Using a time-of-travel sampling approach to quantify per- and polyfluoroalkyl substances (PFAS) stream loading and source inputs in a mixed-source, urban catchment

Understanding per- and polyfluoroalkyl substances (PFAS) mass distribution in surface and groundwater systems can support source prioritization, load reduction, and water management. Thirteen sites within an urban catchment were sampled utilizing a time-of-travel sampling approach to minimize the influence of subdaily fluctuations in mass from PFAS point sources and to quantify PFAS and ancillary chemical loads from various PFAS sources. A larger increase in perfluoroalkyl sulfonate (PFSA) loads (8 to 11 μg/s, up to 618%) than in perfluoroalkyl carboxylate (PFCA) loads (no change to 3.4 μg/s, up to 122%) was observed at sites below tributaries influenced by military bases with known groundwater discharge. Point discharges from two sewage treatment plants (STPs) resulted in increases in PFCA and PFSA loads that were similar (6 and 10 μg/s respectively) below the first STP and greater for PFCA compared to PFSA loads (23 and 13 μg/s respectively) below the second STP. Overall, percent increases in total PFAS load ranged from 20 to 277% for military base inputs and 44 to 77% for STP inputs. A focus catchment that represents only 14% (76.9 km 2 ) of the drainage area at the most downstream site (544 km 2 ) accounted for about 70% of PFSA and 40% of PFCA loads observed at the most downstream site. Results show that by using a time-of-travel sampling approach in mixed, urban settings with several PFAS sources, it is possible to quantify stream loads from individual PFAS sources, thereby improving source attribution and providing actionable data for water-resource managers.

ACS ES&T Water↗

USGS2026

Diverging mineral chemistry of iron and nickel throughout Earth’s changing redox conditions reveals foundation for their evolution as protein cofactors

Iron (Fe) and nickel (Ni) were both foundational to early metabolism, yet their biological trajectories diverged as Earth’s surface redox state changed. Here, we integrate mineral chemistry network analysis, protein metal-site coordination-sphere analysis, and curated redox comparisons to test how geochemistry and metalloprotein architecture co-evolved. Mineral network analyses show broader electronegativity variation and network diversity for Fe-bearing minerals through time relative to Ni-bearing minerals. In structural analyses of protein metal centers in a combined Fe/Ni protein structure set, it is shown that Fe- and Ni-associated environments differ in amino-acid composition, hydropathy structure, and cysteine representation. The greater chemical diversity and electronegativity variation in Fe minerals mirror the higher redox and structural versatility of Fe-binding proteins. The presence of Fe in a broader range of mineral and protein environments demonstrates the chemical adaptability of the metal, from the anoxic Archean to oxidative Earth surface conditions following the Great Oxidation Event. Iron, with its broad redox potential range in Fe-oxidoreductases, has a central role in both anaerobic and aerobic metabolisms. Nickel, by contrast, is less widespread in biology. Today, Ni is predominantly employed in deeply branching anaerobic pathways and by proteins with narrower redox potential ranges. Our results show that evolutionary processes, constrained by metal chemistry, habitually utilize Fe as a redox generalist while retaining Ni in specialized roles. The divergent paths of Ni and Fe, from rocks to proteins, demonstrate the intimate relationship between planetary geochemistry and metabolic origins on Earth and suggest that Fe/Ni geochemistry may inform habitability assessments in extraterrestrial environments when interpreted within specific planetary environmental contexts.

Life↗

USGS2025

Groundwater-storage change in the north Phoenix aquifer, Arizona, 2020–23

The city of Phoenix, Arizona, relies primarily on surface water for municipal water supply. The city also maintains wells to withdraw groundwater, particularly in times of drought and reduced surface-water supply, and to recharge groundwater when excess surface water is available. As of 2023, withdrawals from the aquifer in the northeastern part of the city are a small volume of water, less than 3,000 acre-feet in most years. Each year a similar volume of water is recharged through injection wells. The withdrawal wells are permitted to produce in total more than 20,000 acre-feet per year; increased pumping could lead to future groundwater-storage declines. To better understand groundwater-storage change in the north Phoenix aquifer, a repeat microgravity monitoring network was established in 2020. Measurements of changes in Earth’s gravity provide a direct, non-invasive measurement of subsurface mass change. Groundwater-storage changes were small during the 2020–23 study period, consistent with the relatively small volumes of pumping and recharge. Groundwater levels measured in monitoring wells were stable or increased slightly during this period, although the number of monitoring wells within the area of the gravity monitoring network is sparse. In total, about 15,000 acre-feet of water were pumped and 31,000 acre-feet recharged through injection in the north Phoenix aquifer during the 2020–22 period. Within the monitored area, groundwater storage increased by a small amount, about 1,000 acre-feet, in 2020, and decreased by a larger amount, about 6,000 acre-feet, each year in 2021 and 2022. Storage decreased at 89 of 102 stations from 2020 to 2023. Groundwater-storage decreases greater than the volume of net pumping indicate down-gradient subflow from the aquifer is greater than recharge plus incoming subflow, drying of the unsaturated zone resulting from decreased land-surface recharge, or both. At present (2023), the aquifer appears able to store and supply the relatively small amounts of water needed without excessive drawdown or harmful effects, such as land subsidence and surface inundation. If pumping or recharge increases in the future, the established repeat microgravity network is well suited to capture the spatial extent and magnitude of groundwater-storage changes in the aquifer.

Arizona↗

USGS1996

Technique for estimating magnitude and frequency of peak flows in Maryland

A convenient and reliable technique for estimating flood magnitudes is required for effective flood-plain management and for the efficient design of bridges, culverts, embankments, and flood-protection structures. Methods are presented for estimating peak-flow magnitudes of selected frequencies, ranging from 2 to 500 years, for all nontidal drainage basins in Maryland. The methods were developed by generalized least-squares regression techniques using data from 219 gaged basins in and near Maryland. The State is divided into five hydrologic regions: the Appalachian Plateaus and Allegheny Ridges region, the Blue Ridge and Great Valley region, the Piedmont region, the Western Coastal Plain region, and the Eastern Coastal Plain region. These regions correspond to the physiographic provinces of the State, with the exceptions that (1) the Coastal Plain Province is divided into two hydrologic regions, and (2) there is no distinct hydrologic region corresponding to the Valley and Ridge Province as it is divided into its constituent Allegheny Ridges and Great Valley subdivisions. Sets of equations for calculating peak discharges based on physical basin characteristics are provided for each of the regions. Based on the peak-flow equations, methods for estimating peak flows are presented for ungaged and gaged streams in Maryland. The methods and equations are supported by generalized least-squares analysis of basin and flood-frequency characteristics data from 219 drainage basins in and near Maryland. estimates for each of the five regions are calculated using combinations of the fol-lowing basin characteristics: drainage area, forest cover, basin relief, carbonate rock coverage, storage, and runoff-curve number. Drainage area contributes to the estimate in all five study regions. Carbonate rock coverage is used only in the Blue Ridge and Great Valley region. Storage and runoff-curve number are used solely in the Eastern Coastal Plain region. All other basin characteristics are used in two or more regions. Standard errors of estimate for the regression equations range from 19 to 31 percent in the Appalachian Plateaus and Allegheny Ridges region, 34 to 47 percent in the Blue Ridge and Great Valley region, 33 to 48 percent in the Piedmont region, 45 to 64 percent in the Western Coastal Plain region, and 36 to 42 percent in the Eastern Coastal Plain region.

Maryland↗

USGS2025

Characterization of stream water quality and groundwater levels in the Central Pine Barrens region, Suffolk County, New York, 2017–23

The area locally known as the “Central Pine Barrens” region, located in Suffolk County, New York, contains most of Long Island’s preserved and undeveloped land. This region overlays an aquifer system that provides potable groundwater for residents of Suffolk County. Between 2017 and 2023, the U.S. Geological Survey, in cooperation with the Central Pine Barrens Joint Planning & Policy Commission and the Town of Brookhaven, monitored groundwater levels and stream water quality in this region. Groundwater levels were measured monthly at five wells and continuously (15-minute intervals) at a sixth well. Water quality was monitored at five locations in the Carmans River and at two locations in the Peconic River, and samples were analyzed for major ions, trace elements, nutrients, pharmaceuticals, and pesticides. The major ion compositions at the sites were mainly sodium-chloride type waters, and compositions varied the most at the furthest upstream sites in both streams. Concentrations above aquatic-life criteria thresholds also occurred most frequently at the furthest upstream sites. The seasonal patterns of nutrient loads and concentrations varied between the Carmans and Peconic Rivers. Several organic compounds including pharmaceuticals, domestic use products, and pesticides were detected at low concentrations in both streams. Metformin was the most frequently detected pharmaceutical compound, and herbicides were the most frequently detected pesticide class. Water-quality conditions influenced by anthropogenic contributions are a result of current and historical land use, and these contributions include onsite wastewater disposal systems, commercial or domestic fertilizers and pesticides, and urban or industrial contaminants in road runoff. This study characterizes and improves understanding of the current hydrologic conditions in the Central Pine Barrens region and the study findings can help inform the development of plans to manage, protect, and restore water resources.

New York↗

USGS2026

Stepovers and beyond: Structural control of The Geysers geothermal system and the broader Clear Lake region

Fault geometry exerts a first-order control on geothermal systems by governing stress localization, fracture development, and permeability, yet in complex fault networks or broader shear zones, the relative influence of individual geometric features is often difficult to resolve. In the northern California Coast Ranges, The Geysers geothermal field is commonly interpreted to occur within a releasing stepover, although no single, clearly defined stepover is identified in published studies. To investigate the structural controls on The Geysers and the broader Clear Lake region, a two-dimensional elastic boundary element model is developed to evaluate spatial patterns of dilational strain associated with progressively more complete fault geometries. Model results show that dilation in the region is not controlled by a single structure but instead reflects the combined effects of multiple interacting fault elements. Three primary controls are identified: (1) opposing bends in the regional strike-slip fault system, including a releasing bend along the Maacama fault; (2) the southern fault tip of the Collayomi fault, which generates a prominent dilational lobe beneath the southern Geysers; and (3) a releasing stepover between the Collayomi fault and the Geyser Peak–Mercuryville–Big Sulphur Creek fault system, inferred to collectively behave as a right-lateral shear zone bounding the western margin of The Geysers. Predicted dilational strain magnitudes are sufficient to localize permeability between faults. These results highlight that incorporating complete fault networks and bedrock geological mapping can enhance geothermal assessments and provide a transferable framework for evaluating structurally controlled permeability in tectonically active regions.

California↗

USGS2021

Geology, mineralogy, and cassiterite geochronology of the Ayawilca Zn-Pb-Ag-In-Sn-Cu deposit, Pasco, Peru

The Ayawilca deposit in Pasco, Peru, represents the most significant recent base-metal discovery in the central Andes and one of the largest undeveloped In resources globally. As of 2018, it hosts an 11.7 Mt indicated resource grading 6.9% Zn, 0.16% Pb, 15 g/t Ag, and 84 g/t In, an additional 45.0 Mt inferred resource grading 5.6% Zn, 0.23% Pb, 17 g/t Ag, and 67 g/t In, and a separate Sn-Cu-Ag inferred resource of 14.5 Mt grading 0.63% Sn, 0.21% Cu, and 18 g/t Ag. Newly obtained U–Pb dates for cassiterite by LA-ICP-MS (22.77 ± 0.41 and 23.05 ± 2.06 Ma) assign the Ayawilca deposit to the Miocene polymetallic belt of central Peru. The polymetallic mineralization occurs as up to 70-m-thick mantos hosted by carbonate rocks of the Late Triassic to Early Jurassic Pucará Group, and subordinately, as steeply dipping veins hosted by rocks of the Pucará Group and overlying Cretaceous sandstones-siltstones of the Goyllarisquizga Group. Relicts of a distal retrograde magnesian skarn and cassiterite (stage pre-A) were identified in the deepest mantos. The volumetrically most important mineralization at Ayawilca comprises a low-sulfidation assemblage (stage A) with quartz, pyrrhotite, arsenopyrite, chalcopyrite, Fe-rich sphalerite, and traces of stannite and herzenbergite. Stage A sphalerite records progressive Fe depletion, from 33 to 10 mol% FeS, which is compatible with the observed transition from low- to a subsequent intermediate-sulfidation stage (B) marked by the crystallization of abundant pyrite and marcasite. Finally, during a later intermediate-sulfidation stage (C) sphalerite (up to 11 mol% FeS), galena, native bismuth, Cu-Pb-Ag sulfosalts, siderite, Mn-Fe carbonates, kaolinite, dickite, and sericite were deposited. This paragenetic evolution shows striking similarities with that at the Cerro de Pasco Cordilleran-type polymetallic deposit, even if at Ayawilca stage C did not reach high-sulfidation conditions. The occurrence of an early retrograde skarn assemblage suggests that the manto bodies at Ayawilca formed at the transition between distal skarn and skarn-free (Cordilleran-type) carbonate-replacement mineralization. Mineral assemblages define a T- f S 2 evolutionary path close to the pyrrhotite-pyrite boundary. Buffering of hydrothermal fluids by underlying Devonian carbonaceous phyllites of the Excelsior Group imposed highly reduced conditions during stage A mineralization (log f O 2 < − 30 atm). The low f O 2 favored efficient Sn mobility during stages pre-A and A, in contrast to other known ore deposits in the polymetallic belt of central Peru, in which the occurrence of Sn minerals is minor. Subsequent cooling, progressive sealing of vein walls, and decreasing buffering potential of the host rocks promoted the shift from low- (stage A) to intermediate-sulfidation (stages B and C) states. LA-ICP-MS analyses reveal significant In contents in Fe-rich sphalerite (up to 1.7 wt%), stannite (up to 1908 ppm), and chalcopyrite (up to 1185 ppm). The highest In content was found in stage A sphalerite that precipitated along with chalcopyrite and stannite, thus pointing to the early, low-sulfidation assemblage as prospective for this high-tech metal in similar mineral systems. Indium was likely incorporated into the sphalerite crystal lattice via Cu + + In 3+ ↔ 2 Zn 2+ and (Sn, Ge) 4+ + (Ga, In) 3+ + (Cu + Ag) + ↔ 4 Zn 2+ coupled substitutions. Indium incorporation mechanisms into the stannite and chalcopyrite crystal lattices remain unclear.

Pasco↗

USGS2026

Repeated coral bleaching events have eroded reef accretion potential in the Florida Keys

Coral bleaching is now the primary driver of coral-reef degradation globally, threatening the persistence of coral-reef functions and the invaluable ecosystem services they support. The Florida Keys have been impacted by four severe, regional-scale coral-bleaching events, which occurred in 1997–1998, 2005, 2014–2015, and 2023. Our aim in this study was to quantify the effects of those thermal-stress events on the persistence of coral-reef structures. We leveraged long-term coral-reef monitoring data to quantify the impacts of coral bleaching on coral cover, carbonate production, and reef-accretion potential throughout the Florida Keys from 1996–2024. Our study indicates that coral bleaching drove significant declines of reef-building corals, which successively diminished regional-scale reef-accretion potential (from 1.65 ± 0.33 mm y -1 in 1996) and culminated with a regional-scale transition to net reef erosion (-0.12 ± 0.08 mm y -1 ) following the 2023 event. Coral bleaching was the primary driver of declining reef-building capacity, with the cumulative impacts of the four coral-bleaching events accounting for >75% of total declines since 1996. The 1997–1998 event alone drove ~50% of overall declines, largely due to losses of the shallow-water ecosystem engineer, Acropora palmata . More moderate impacts of thermal stress on regional reef-accretion potential in 2005 (6%) and 2014–2015 (9%) could lend some support to the hypothesis that the remaining corals were more thermally tolerant; however, the unprecedented thermal stress event in 2023 caused widespread coral-bleaching and bleaching-related mortality, and caused an additional 12% of the total decline in reef-accretion potential. Stony-coral tissue loss disease accounted for an additional 6% of the decline, with the remaining 19% unexplained. Coral bleaching has already dramatically reshaped the structure and function of coral reefs in the Florida Keys over the last three decades. With the high likelihood that thermal stress will accelerate moving forward, the persistence of Florida’s essential coral-reef functions and services is uncertain.

Florida↗

USGS2026

Structural evolution of iron coordination in proteins across Earth’s oxygenation history

Protein metal-binding sites support essential biological functions shaped by protein fold, subunit interactions, and cofactor chemistry. Because these sites encode both biochemical function and environmental constraint, they offer a route to connect protein evolution with changes in Earth’s surface environment through time. Of particular interest is iron (Fe), the most widely used metal in biology and a cofactor central to both anaerobic and aerobic metabolism. Here, we systematically compare the immediate chemical environments of functionally essential Fe-binding sites in three-dimensional protein structures to test whether Fe coordination spheres differ across oxygen contexts. Using a curated dataset of experimentally determined structures, we identify a clear shift in the local chemistry of Fe-binding environments from anaerobic to aerobic proteins. Aerobic Fe sites are significantly more hydrophilic than anaerobic ones, and amino-acid composition analyses show reduced cysteine use in aerobic Fe-binding neighborhoods. These patterns suggest that as Earth’s surface environments became more oxygenated, proteins retained Fe as a core redox metal while reconfiguring local coordination chemistry in ways less vulnerable to oxidative damage. More broadly, this study introduces and applies the Coordination Sphere Analysis and Comparison (CSAC) workflow, an open and archived Python workflow for extracting local metal-binding environments from structure datasets, providing a framework for linking metalloprotein structure to evolutionary and geobiological transitions across Earth history.

Discover Life↗

USGS2024

System characterization report on the Earth Surface Mineral Dust Source Investigation (EMIT) sensor

Executive Summary This report addresses system characterization of the Earth Surface Mineral Dust Source Investigation (EMIT) sensor, an imaging spectrometer developed by the National Aeronautics and Space Administration. This report is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior) and radiometric performances. Results of these analyses indicate that the EMIT sensor has a band-to-band geometric performance in the range of −0.355 to 0.210 pixel with a few exceptions of shortwave infrared channels. Geometric offset relative to the Landsat 8 Operational Land Imager ranged from −15.966 meters (−0.266 pixel) to 43.844 meters (0.731 pixel). Offset of a radiometric comparison ranged from −0.016 to 0.025, and slope of a radiometric comparison ranged from 0.837 to 0.985. EMIT agreed with Radiometric Calibration Network measurements within 5 percent across most of the spectral channels.

Open-File Report↗

USGS2026

Dynamic drainage reorganization in Eastern Tibet: Insights from the Yangtze River first bend

The modern drainage network of eastern Tibet is widely believed to have developed through a series of river capture and flow reversal events; however, the timing and mechanisms driving this reorganization remain contentious. Among these events, the river capture that formed the First Bend of the Yangtze River (YFB) stands out as both iconic and particularly debated. Here we present sedimentary provenance data from the Late Miocene–Quaternary Dali Basin, located south of the YFB, which indicate that a southward-flowing Jinsha River (i.e., the present-day upper Yangtze River) sourced sediment to the Dali basin at ∼7.4–6.4 Ma in a drainage configuration different from that of today. Because this interval postdates the initial establishment of a near-modern Jinsha River system prior to the Miocene, our results imply at least two discrete fluvial reorganizations occurred at the YFB—one preceding ∼7.4 Ma and another following ∼6.4 Ma. By integrating these findings with landscape evolution modeling, we infer that the initiation of rapid uplift of the Yulong-Haba Mountains and the Diancang Shan may have been responsible for these drainage reorganizations. These results underscore that Cenozoic drainage systems on the eastern Tibetan Plateau have evolved dynamically on a short timescale of ∼10 5 –10 6 -year, rather than remaining in a long-term stationary configuration on ∼10 7 -year timescales.

eastern Tibetan Plateau, first bend of the Yangtze↗

USGS2026

Simulation-based scenario ShakeMaps for large magnitude (MW6.5+) crustal earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults, Washington, USA

Scenario ground‐motion maps based on empirical ground‐motion models (GMMs) provide a rapid and generally reliable means of estimating the amplitude and distribution of earthquake shaking. However, because GMMs are designed for broad applicability, they often rely on simplified representations of Earth structure, which can limit their accuracy in regions with complex source, path, and site effects. This can substantially impact the accuracy of predicted shaking in areas like western Washington State, where deep, interconnected basin structure exerts a strong influence on seismic‐wave propagation. In this study, we present a new suite of simulation‐based scenario ShakeMaps that characterize ground shaking from large‐magnitude ( ⁠ M W 6.5–7.5) earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults. These maps are developed using results from recent 3D wave propagation simulations ( Stone et al. , 2022 , 2023 , 2025 ) that incorporate realistic rupture geometries, variable slip distributions, and a regional 3D seismic velocity model with shallow soils. Broadband ground motions are estimated by combining the low‐frequency (<1 Hz) deterministic seismograms from these studies with high‐frequency (1–10 Hz) stochastic seismograms. Simulated ground motions are corrected to account for the enforced minimum shear‐wave velocity and nonlinear site response. The resulting ShakeMaps represent median ground‐shaking estimates derived from multiple rupture scenarios with varying slip distributions and hypocenter locations for each fault. To extend ShakeMap coverage beyond the simulation domain (i.e., into eastern Washington, northern Oregon, and southwestern British Columbia), we scale GMM‐based ground‐motion estimates using amplification patterns observed in the simulations. These new ShakeMaps reveal the substantial influence of deep basin structure on shaking intensity, underscoring the importance of considering crustal structure complexity in regional hazard assessments for the Pacific Northwest.

Washington↗

USGS2026

Inference of pattern-based geological CO2 sequestration and oil recovery potential in a commingled main pay and residual oil zone CO2-EOR flood

Several detailed studies have shown that residual oil zones (ROZs) can present significant resources for additional hydrocarbon recovery as well as subsurface carbon dioxide (CO 2 ) sequestration via enhanced oil recovery by injecting CO 2 (CO 2 -EOR). Field development strategies included new wells drilled dedicated to main pay zones (MPZ) and ROZs, or existing wells in MPZs deepened to ROZs for commingled injection-production using different well patterns. The latter presented a challenge when discerning the injection and production from each of the zones, and for subsequent quantification of CO 2 sequestration and EOR potential from different patterns and from the field. In this paper, an innovative method for analyzing commingled injections and productions from MPZs and ROZs, with application to pattern-based data from four staggered line drive patterns in Wasson Field's Denver Unit, Texas, USA, was developed. Decline curve and ratio-trend methods were used as means of history-matching and forecasting. Cumulative production-time and cumulative production-rate data for oil, gas, and water, as well as water-oil ratio (WOR) and gas-oil ratio (GOR), were analyzed along with injection data for time intervals covering major injection events in MPZ, or MPZ and ROZ combined. A combined analysis enabled inference of allocation of fluids into different zones during WAG (water alternating gas) injection and thereby estimation of CO 2 storage, utilization, and retention in different zones as a function of total injection. Results show that ROZs generally present higher CO 2 sequestration potential compared to MPZs, and a comparable incremental oil recovery factor of ∼20%, on average. Results based on ratio analysis further show that while the WOR trend of the pattern production is mostly dominated and controlled by ROZ, GOR is controlled by both intervals. Although the method relying on decline curves and the approach used in zonal fluid allocations are subject to their limitations, this study presents a practical and innovative well-pattern-based method to infer and forecast CO 2 sequestration and oil recovery quantities and fluid ratios from MPZs and ROZs in commingled operations and highlight the added potential offered by ROZs.

Texas↗

USGS2025

High-precision earthquake catalog for Minto Flats fault zone, central Alaska, reveals complex and conjugate faulting

The Minto Flats fault zone (MFFZ) in central Alaska is a left‐lateral strike‐slip fault system situated between the continental‐scale right‐lateral Denali and Kaltag‐Tintina faults. The MFFZ has the potential to generate magnitude 7 earthquakes, and it hosted a magnitude 6 earthquake in 1995. It has also produced exotic events, such as very‐low‐frequency earthquakes and nucleation signals. We use network‐matched filtering and relative earthquake relocation techniques to derive a detailed catalog of earthquake locations for the MFFZ. The catalog spans from August 2014 to December 2019, a time period including 13 temporary seismic stations in the region. Our results provide the most complete catalog for the MFFZ and include deeper events, clusters of shallow seismicity, and a complex and segmented fault structure not observed in the original regional catalog. We document right‐lateral strike‐slip faulting, conjugate to the main northeast‐striking left‐lateral faults of the MFFZ. Below Nenana basin, the relocated seismicity reveals northwest‐dipping left‐lateral faults, supporting the inference that deep crustal active faulting is associated with recent basin deformation.

Alaska↗

USGS2024

Geological context and significance of the clay-sulfate transition region in Mount Sharp, Gale crater, Mars: An integrated assessment based on orbiter and rover data

On Mars, phyllosilicate (“clay”) minerals are often associated with older terrains, and sulfate minerals are associated with younger terrains, and this dichotomy is taken as evidence that Mars’ surface dried up over time. Therefore, in situ investigation of the Mount Sharp strata in Gale crater, which record a shift from dominantly clay-bearing to sulfate-bearing minerals, as seen in visible−near-infrared orbital reflectance spectra, is a key science objective for the Mars Science Laboratory (MSL) Curiosity rover mission. Here, we present regional (orbiter-based) and in situ (rover-based) evidence for a low-angle erosional unconformity that separates the lacustrine and marginal lacustrine deposits of the Carolyn Shoemaker formation from the dominantly eolian deposits of the lower Mirador formation within the orbitally defined clay-sulfate transition region. The up-section record of wetter (Carolyn Shoemaker formation) to drier (lower Mirador formation) depositional conditions is accompanied by distinct changes in diagenesis. Clay minerals occur preferentially within the Carolyn Shoemaker formation and are absent within the lower members of the Mirador formation. At and above the proposed unconformity, strata are characterized by an increase in diagenetic nodules enriched in X-ray amorphous Mg-sulfate. Early clay formation in the Carolyn Shoemaker formation may have created a hydraulic barrier such that later migrating magnesium- and sulfur-rich fluids accumulated preferentially within the lower members of the Mirador formation. The proposed unconformity may have also acted as a fluid conduit to further promote Mg-sulfate nodule formation at the Carolyn Shoemaker−Mirador formation boundary. These results confirm an association of the clay-sulfate transition with the drying of depositional environments, but they also suggest that at least some orbital sulfate signatures within the region are not time-congruent with the environmental signals extracted from primary sedimentology. Our findings highlight that complex interactions among primary depositional environment, erosion, and diagenesis contribute to the transition in clay-sulfate orbital signatures observed in the stratigraphy of Mount Sharp.

GSA Bulletin↗