USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geophysical Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources
USGS2016

Regional chloride distribution in the Northern Atlantic Coastal Plain aquifer system from Long Island, New York, to North Carolina

The aquifers of the Northern Atlantic Coastal Plain are the principal source of water supply for the region’s nearly 20 million residents. Water quality and water levels in the aquifers, and maintenance of streamflow, are of concern because of the use of this natural resource for water supply and because of the possible effects of climate change and changes in land use on groundwater. The long-term sustainability of this natural resource is a concern at the local community scale, as well as at a regional scale, across state boundaries. In 2010, the U.S. Geological Survey (USGS) began a regional assessment of the Northern Atlantic Coastal Plain aquifers. An important part of this assessment is a regional interpretation of the extent of saltwater and the proximity of saltwater to fresh-groundwater resources and includes samples and published interpretations of chloride concentrations newly available since the last regional chloride assessment in 1989. This updated assessment also includes consideration of chloride samples and refined interpretations that stem from the 1994 discovery of the buried 35 million year old Chesapeake Bay impact structure that has substantially altered the understanding of the hydrogeologic framework and saltwater distribution in eastern Virginia. In this study, the regional area of concern for the chloride samples and interpretations extends from the Fall Line in the west to the outer edge of the Continental Shelf in the east and from the eastern tip of Long Island in the north to about halfway down the North Carolina coast in the south. Discussions of chloride distribution are presented for each of the 10 regional aquifer layers of the Northern Atlantic Coastal Plain, including the offshore extents. Maps of interpreted lines of equal concentration or isochlors were manually prepared for nine of the regional aquifers; a map was not prepared for the surficial regional aquifer. The isochlor interpretations include the offshore extent of the nine regional aquifers and are presented on a 1:2,000,000 scale base map. Vertically, the chloride samples and interpretations range from deepest (oldest) to shallowest (youngest)—Potomac-Patuxent, Potomac-Patapsco, Magothy, Matawan, Monmouth-Mount Laurel, Aquia, Piney Point, Lower Chesapeake, and Upper Chesapeake regional aquifers. The approach of this study maximizes the overall density of chloride information and data by assessing relevant published interpretations, all USGS chloride samples, and all relevant offshore samples in one comprehensive interpretation. Published isochlors, where they were interpreted by regional aquifer, were used as much as possible for this regional isochlor assessment. Publication dates for the isochlors used range from 1982 to 2015, and the scales for the isochlors range from local (county or municipality) to state (sub-regional) to regional. The USGS National Water Information System database provided well sample data for the parts of aquifers that are mainly beneath the land areas and yielded 37,517 water-quality records for 1903 through 2011. Published data reports from four phases of research-related offshore coring (1976, 1993, 1997, 2009) were the main source of water-quality data for the parts of aquifers from the shoreline to the outer edge of the Continental Shelf and yielded samples from multiple depths of each of 13 cores. This study also used interpretations and offshore core data from the last regional chloride assessment (1989) which, in addition to 7 offshore cores, included water-quality data from about 500 wells, and borehole geophysics interpretations from a subset of 11 wells. All published information and data that were used in this study were considered time independent and did not assess the published interpretations or data for temporal trends. The approach used here examined only published interpretations and available chloride data, and did not directly use supplemental techniques that can provide insight into the distribution of saltwater, such as geochemical characterization, borehole geophysical information, and geochronology. Isochlor maps for this study are limited to manual interpretations of the 250-milligram per liter (mg/L) and 10,000-mg/L boundaries developed for 9 of the 10 regional aquifers that constitute the regional hydrogeologic framework of the Northern Atlantic Coastal Plain. For a given aquifer, the approach was to initially consider published isochlor interpretations, where available, then to modify the published interpretations, if necessary, to the extent indicated by the well and core samples. The final step was to interpolate isochlors to the full extent of each aquifer layer in areas with sufficient samples or cited interpretations, or to extrapolate isochlors in areas with no samples or where samples were sparse. The principal limitation of this study is that, because of its regional extent, data and information density can vary greatly, and thus confidence in interpretations can vary widely for onshore and offshore areas across the study area. In areas of sparse data, some samples of elevated chloride could be misinterpreted as being part of a regional elevated chloride trend, and in other cases, an elevated concentration could be misinterpreted as being of only local importance. The interpretive work of this study was applied to a 1:2,000,000 scale base map. Locations of isochlors, wells, cores, political boundaries, and shorelines are meant to be considered approximate. The isochlors presented in this study were manually interpreted for each aquifer unit as a conceptual representation of an equal concentration line approximately in the middle of an aquifer’s thickness. Differences in chloride concentration lines between the top and bottom of an aquifer could be substantial, especially for the thick parts of aquifers, but that information is not presented in this regional assessment. Although additional offshore chloride data are available compared to 27 years ago (1989), the offshore information remains sparse, resulting in less confidence in the offshore interpretations than in the onshore interpretations. Regionally, the 250- and 10,000-mg/L isochlors tend to map progressively eastward from the deepest to the shallowest aquifers across the Northern Atlantic Coastal Plain aquifer system but with some exceptions. The additional data, conceptual understanding, and interpretations in the vicinity of the buried Chesapeake Bay impact structure in eastern Virginia resulted in substantial refinement of isochlors in that area. Overall, the interpretations in this study are updates of the previous regional study from 1989 but do not comprise major differences in interpretation and do not indicate regional movement of the freshwater-saltwater interface since then.

Delaware, Maryland, New Jersey, New York, North Ca↗
USGS2009

Estimation of Leakage Potential of Selected Sites in Interstate and Tri-State Canals Using Geostatistical Analysis of Selected Capacitively Coupled Resistivity Profiles, Western Nebraska, 2004

With increasing demands for reliable water supplies and availability estimates, groundwater flow models often are developed to enhance understanding of surface-water and groundwater systems. Specific hydraulic variables must be known or calibrated for the groundwater-flow model to accurately simulate current or future conditions. Surface geophysical surveys, along with selected test-hole information, can provide an integrated framework for quantifying hydrogeologic conditions within a defined area. In 2004, the U.S. Geological Survey, in cooperation with the North Platte Natural Resources District, performed a surface geophysical survey using a capacitively coupled resistivity technique to map the lithology within the top 8 meters of the near-surface for 110 kilometers of the Interstate and Tri-State Canals in western Nebraska and eastern Wyoming. Assuming that leakage between the surface-water and groundwater systems is affected primarily by the sediment directly underlying the canal bed, leakage potential was estimated from the simple vertical mean of inverse-model resistivity values for depth levels with geometrically increasing layer thickness with depth which resulted in mean-resistivity values biased towards the surface. This method generally produced reliable results, but an improved analysis method was needed to account for situations where confining units, composed of less permeable material, underlie units with greater permeability. In this report, prepared by the U.S. Geological Survey in cooperation with the North Platte Natural Resources District, the authors use geostatistical analysis to develop the minimum-unadjusted method to compute a relative leakage potential based on the minimum resistivity value in a vertical column of the resistivity model. The minimum-unadjusted method considers the effects of homogeneous confining units. The minimum-adjusted method also is developed to incorporate the effect of local lithologic heterogeneity on water transmission. Seven sites with differing geologic contexts were selected following review of the capacitively coupled resistivity data collected in 2004. A reevaluation of these sites using the mean, minimum-unadjusted, and minimum-adjusted methods was performed to compare the different approaches for estimating leakage potential. Five of the seven sites contained underlying confining units, for which the minimum-unadjusted and minimum-adjusted methods accounted for the confining-unit effect. Estimates of overall leakage potential were lower for the minimum-unadjusted and minimum-adjusted methods than those estimated by the mean method. For most sites, the local heterogeneity adjustment procedure of the minimum-adjusted method resulted in slightly larger overall leakage-potential estimates. In contrast to the mean method, the two minimum-based methods allowed the least permeable areas to control the overall vertical permeability of the subsurface. The minimum-adjusted method refined leakage-potential estimation by additionally including local lithologic heterogeneity effects.

Scientific Investigations Report↗
USGS2002

Crustal structure and relocated earthquakes in the Puget Lowland, Washington, from high-resolution seismic tomography

The availability of regional earthquake data from the Pacific Northwest Seismograph Network (PNSN), together with active source data from the Seismic Hazards Investigation in Puget Sound (SHIPS) seismic experiments, has allowed us to construct a new high-resolution 3-D, P wave velocity model of the crust to a depth of about 30 km in the central Puget Lowland. In our method, earthquake hypocenters and velocity model are jointly coupled in a fully nonlinear tomographic inversion. Active source data constrain the upper 10–15 km of the model, and earthquakes constrain the deepest portion of the model. A number of sedimentary basins are imaged, including the previously unrecognized Muckleshoot basin, and the previously incompletely defined Possession and Sequim basins. Various features of the shallow crust are imaged in detail and their structural transitions to the mid and lower crust are revealed. These include the Tacoma basin and fault zone, the Seattle basin and fault zone, the Seattle and Port Ludlow velocity highs, the Port Townsend basin, the Kingston Arch, and the Crescent basement, which is arched beneath the Lowland from its surface exposure in the eastern Olympics. Strong lateral velocity gradients, consistent with the existence of previously inferred faults, are observed, bounding the southern Port Townsend basin, the western edge of the Seattle basin beneath Dabob Bay, and portions of the Port Ludlow velocity high and the Tacoma basin. Significant velocity gradients are not observed across the southern Whidbey Island fault, the Lofall fault, or along most of the inferred location of the Hood Canal fault. Using improved earthquake locations resulting from our inversion, we determined focal mechanisms for a number of the best recorded earthquakes in the data set, revealing a complex pattern of deformation dominated by general arc-parallel regional tectonic compression. Most earthquakes occur in the basement rocks inferred to be the lower Tertiary Crescent formation. The sedimentary basins and the eastern part of the Olympic subduction complex are largely devoid of earthquakes. Clear association of hypocenters and focal mechanisms with previously mapped or proposed faults is difficult; however, seismicity, structure, and focal mechanisms associated with the Seattle fault zone suggest a possible high-angle mode of deformation with the north side up. We suggest that this deformation may be driven by isostatic readjustment of the Seattle basin.

Washington↗
USGS2001

Pond-aquifer interaction at South Pond of Lake Cochituate, Natick, Massachusetts

A U.S. Army facility on a peninsula in South Pond of Lake Cochituate was designated a Superfund site by the U.S. Environmental Protection Agency in 1994 because contaminated ground water was detected at the facility, which is near the Natick Springvale public-supply wellfield. The interaction between South Pond and the underlying aquifer controls ground-water flow patterns near the pond and determines the source of water withdrawn from the wellfield.A map of the bathymetry and the thickness of fine-grained pond-bottom sediments was prepared on the basis of fathometer, ground-penetrating radar, and continuous seismic-reflection surveys. The geophysical data indicate that the bottom sediments are fine grained toward the middle of the pond but are coarse grained in shoreline areas. Natick Springvale wellfield, which consists of three active public-supply wells adjacent to South Pond, is 2,200 feet downgradient from the boundary of the Army facility. That part of South Pond between the Natick Springvale wellfield and the Army facility is 18 feet deep with at least 14 feet of fine-grained sediment beneath the pond-bottom. Water levels from the pond and underlying sediments indicate a downward vertical gradient and the potential for infiltration of pond water near the wellfield. Head differences between the pond and the wellfield ranged from 1.66 to 4.41 feet during this study. The velocity of downward flow from South Pond into the pond-bottom sediments, determined on the basis of temperature profiles measured over a diurnal cycle at two locations near the wellfield, was 0.5 and 1.0 feet per day. These downward velocities resulted in vertical hydraulic conductivities of 1.1 and 2.9 feet per day for the pond-bottom sediments.Naturally occurring stable isotopes of oxygen and hydrogen were used as tracers of pond water and ground water derived from recharge of precipitation, two potential sources of water to a well in a pond-aquifer setting. The isotopic composition of pond water varied seasonally and was distinctly different from the isotopic composition of ground water. The isotopic composition of shallow water beneath and adjacent to South Pond near the wellfield corresponds to the temporal variation of pond water, indicating that nearly all water at shallow depths was derived from pond water. A two-component mixing model based on the average stable isotope values of the source waters indicated that 64 ?15 percent at the 95-percent confidence interval of the water withdrawn at the public-supply wells was derived from the pond; pond water accounted for most of the uncertainty in the result. The rate of infiltration of pond water into the aquifer and discharging to the wellfield was 1.0 million gallons per day at the average pumping rate.

Water-Resources Investigations Report↗
USGS2022

Potential effects of energy development on environmental resources of the Williston Basin in Montana, North Dakota, and South Dakota—Water resources

The Williston Basin has been a leading oil and gas producing area for more than 50 years. While oil production initially peaked within the Williston Basin in the mid-1980s, production rapidly increased in the mid-2000s, largely because of improved horizontal (directional) drilling and hydraulic fracturing methods. In 2012, energy development associated with the Bakken Formation was identified as a priority requiring collaboration toward improved timeliness of issuing permits for new wells combined with reasonable measures to maintain environmental quality. Shortly thereafter, the Bakken Federal Executive Group was created to address common challenges associated with energy development. The Bakken Federal Executive Group partner agencies identified a gap in current understanding of the cumulative environmental challenges attributed to energy development throughout the area, resulting in an effort to aggregate scientific data and identify additional research and information needs related to natural resources within areas of energy development in the Williston Basin. As part of this effort, water resources in the area (including groundwater; streams and rivers; and lakes, reservoirs, and wetlands) were characterized and described in terms of physical occurrence, flow characteristics, recharge, water quality, and water use. Similarly, waters produced during energy-development activities also were characterized even though these waters are not considered usable resources within the area. Groundwater resources were characterized by the major hydrogeologic units, or aquifers, identifying the units that supply most groundwater used for domestic, stock, agricultural, and industrial purposes. The groundwater characterization included other deeper hydrogeologic units in the Williston Basin that may be a useable source of water with treatment, have utility as a reservoir for reinjection of produced waters, or be a source of minerals and energy resources. A generalized groundwater budget and flow system identifying the sources of recharge (stream infiltration, precipitation, and movement [leakage] from other aquifers) and the general groundwater flow direction is included for each of the major hydrogeologic units. Rivers and streams within the Williston Basin with 10 or more years of continuous streamflow data were identified. For a subset of these sites, streamflow characteristics, including the monthly and annual mean flow, were generated to identify seasonal and interannual changes in streamflow and thus provide information on the drivers and reliability of streamflow at the seasonal or multiyear scale. Daily streamflow and annual extreme flows (peak and low flow) also were estimated for the subset of sites. The daily streamflow and annual extreme flow values provide information on short-term or extreme events that are relevant to infrastructure design and evaluating spills, leaks, or accidental discharges of water or petroleum products. Surface-water features (lakes, ponds, and wetlands) were classified using the Cowardin system and identified on the National Wetlands Inventory maps generated by the U.S. Fish and Wildlife Service. The spatial distribution of the surface-water features was analyzed by State, county, and specifically in comparison to the Prairie Pothole Region. The proximity of the surface-water features to energy development infrastructure (specifically oil or gas well pads) was evaluated. It was determined that, although oil or gas wells are often near a surface-water feature, most surface-water features do not have wells nearby, with the exception of wells in the Prairie Pothole Region. Water-quality data were aggregated from two data sources: (1) the Water-Quality Portal, sponsored by the U.S. Geological Survey (USGS), U.S. Environmental Protection Agency (EPA), and National Water Quality Monitoring Council; and (2) a data compilation completed as part of the USGS National Water-Quality Assessment project. The Water-Quality Portal integrates publicly available water-quality data from databases maintained by the USGS, EPA, and U.S. Department of Agriculture, including water-quality data from Tribal, State, and local databases. Water-quality data for 15 commonly measured water-quality constituents were aggregated for groundwater, rivers and streams, and lakes and reservoirs. For each aggregated dataset (groundwater, rivers and streams, and lakes and reservoirs), analyses of the water-quality data included summary statistics, maps of spatial distribution of constituent values, boxplots of constituent values by timeframe or hydrogeologic unit, spatial comparisons of site locations and constituent values to petroleum well density, and comparisons of the constituent values measured to EPA drinking-water standards/guidelines. Produced water includes all fluids brought to the surface along with the targeted hydrocarbons as part of the oil and gas exploration and extraction processes. These fluids may include formation water (waters that co-exist with rock/oil/gas), hydraulic fracturing fluids, and other combinations of water and chemicals used during oil and gas well drilling, development, treatments, recompletions, and workovers. Produced water datasets were aggregated from two sources: the USGS National Produced Waters Geochemical database (ver. 2.1) and a series of projects focused specifically on sampling produced water in the Williston Basin from 2010 to 2014. The National Produced Waters Geochemical database was useful for a general understanding of produced-water chemistry. Produced waters are characterized by extreme salinity and contain elevated concentrations of other constituents (including arsenic, barium, cadmium, lead, zinc, radium-226/radium-228, and ammonium) that could negatively affect water and aquatic resources if released. Produced waters also have a generally unique chemical (isotopic) signature that may be useful in tracking water from different geologic units; for example, the oxygen/deuterium and strontium ratio values measured in brine waters from the Bakken Formation are distinct from brines collected from other geologic units in the Williston Basin. Water-use information related to energy production in the area also was aggregated and summarized. The summary of water use is not limited to oil and gas production but includes water used to produce all types of energy resources in the Williston Basin, including coal/lignite, thermoelectric power, oil and gas, hydropower, biomass and biofuels, wind, geothermal, and solar. Each State has its own methods for regulating and reporting water usage within its jurisdiction. These methods can introduce problems when examining water use from sources, such as the Missouri River or Fox Hills aquifer, that are shared across political boundaries. Without the one-to-one match for usage types and amounts used from a water source, it is difficult to develop a comprehensive water budget for the water source being evaluated. A large amount of freshwater is required to prepare a well for oil and gas well production; in some cases, 3 to 7 million gallons of water are needed per well. The EPA estimates that hydraulic fracturing in the Williston Basin uses between 70 to 140 billion gallons per year. Water also is used for myriad other purposes related to ancillary oil and gas extraction. In addition to water used for immediate energy development, the expanded human workforce migrating into the area and other support staff who have moved into the area during the development also use water. Research and information needs were identified that could be relevant in the evaluation of the effects of energy development on water resources. Information needs related to the evaluation of groundwater resources include the following: improved potentiometric-surface maps for glacial units; availability of a uniform stream network digital geographic coverage that spans the international boundary with Canada; enhanced surface-water use information with regards to the gain and loss of streamflow to shallow groundwater, which would increase understanding groundwater and surface-water interactions; and expanded geophysical assessments. Gaps in the availability of streamflow data include the lack of information on ice-jam flooding despite potential for effects to infrastructure (pipelines, roads, and facilities) and an understanding of the cumulative effects of largely undocumented stock and diversion dams. Although this study resulted in the aggregation of a large quantity of water-quality data, the availability of consistently collected, systematically processed and reported data over large parts of the Williston Basin is sparse. Few samples have been analyzed for constituents that may indicate the effect of energy development on water resources. Constituents that could be considered include boron, chloride, bromide, iodine, fluoride, manganese, lithium, radium, strontium isotopes, volatile organic compounds, and isotopes of inorganic ions (such as hydrogen and carbon). Collaboration between Tribal, Federal, State, and local entities to identify a common study design, common monitoring constituents, and consistent sampling locations would generate datasets with broad utility and would likely result in overall cost savings for monitoring over time. Similarly, there is a need for standardized sample collection, processing, laboratory analytical methods, and the collection of ancillary data for produced waters sampling. Additional characterization of the range of chemical, microbial, and isotopic compositions and quantities of “end-member” produced waters, and the collection of time-series datasets to document the changes in produced waters during and after well development also were needs identified during this study. Water-use estimates would be improved through the implementation of comprehensive studies of water use from groundwater and surface-water sources using consistent methodologies across the Williston Basin. The submission of chemical and water data related to hydraulic fracturing collected by the oil and gas industry would add to the quantity of available data. Consistent implementation of regulations and monitoring controls across political boundaries (State, county, and international) would further improve the consistency of data available for the estimates of water use.

Montana, North Dakota, South Dakota↗
USGS2006

Geology, ground-water hydrology, geochemistry, and ground-water simulation of the Beaumont and Banning Storage Units, San Gorgonio Pass area, Riverside County, California

Ground water has been the only source of potable water supply for residential, industrial, and agricultural users in the Beaumont and Banning storage units of the San Gorgonio Pass area, Riverside County, California. Ground-water levels in the Beaumont area have declined as much as 100 feet between the early 1920s and early 2000s, and numerous natural springs have stopped flowing. In 1961, the San Gorgonio Pass Water Agency (SGPWA) entered into a contract with the California State Department of Water Resources to receive 17,300 acre-feet per year of water to be delivered by the California State Water Project (SWP) to supplement natural recharge. Currently (2005), a pipeline is delivering SWP water into the area, and the SGPWA is artificially recharging the ground-water system using recharge ponds located along Little San Gorgonio Creek in Cherry Valley with the SWP water. In addition to artificial recharge, SGPWA is considering the direct delivery of SWP water for the irrigation of local golf courses and for agricultural supply in lieu of ground-water pumpage. To better understand the potential hydrologic effects of different water-management alternatives on ground-water levels and movement in the Beaumont and Banning storage units, existing geohydrologic and geochemical data were compiled, new data from a basin-wide ground-water level and water-quality monitoring network were collected, monitoring wells were installed near the Little San Gorgonio Creek recharge ponds, geohydrologic and geochemical analyses were completed, and a ground-water flow simulation model was developed. The San Gorgonio Pass area was divided into several storage units on the basis of mapped or inferred faults. This study addresses primarily the Beaumont and Banning storage units. The geologic units in the study area were generalized into crystalline basement rocks and sedimentary deposits. The younger sedimentary deposits and the surficial deposits are the main water-bearing deposits in the San Gorgonio Pass area. The water-bearing deposits were divided into three aquifers: (1) the perched aquifer, (2) the upper aquifer, and (3) the lower aquifer based on lithologic and downhole geophysical logs. Natural recharge in the San Gorgonio Pass area was estimated using INFILv3, a deterministic distributed- parameter precipitation-runoff model. The INFILv3 model simulated that the potential recharge of precipitation and runoff in the Beaumont and Banning storage units was about 3,710 acre-feet per year and that the potential recharge in 28 sub-drainage basins upstream of the storage units was about 6,180 acre-feet per year. The water supply for the Beaumont and Banning storage units is supplied by pumping ground water from wells in the Canyon (Edgar and Banning Canyons), Banning Bench, Beaumont, and Banning storage units. Total annual pumpage from the Beaumont and Banning storage units ranged from about 1,630 acre-feet in 1936 to about 20,000 acre-feet in 2003. Ground-water levels declined by as much as 100 feet in the Beaumont storage unit from 1926-2003 in response to ground-water pumping of about 450,160 acre-feet during this period. Since ground-water development began in the San Gorgonio Pass area, there have been several sources of artificial recharge to the basin including return flow from applied water on crops, golf courses, and landscape; septic-tank seepage; and infiltration of storm runoff diversions and imported water into recharge ponds. Return flow from applied water and septic-tank seepage was estimated to reach a maximum of about 8,100 acre-feet per year in 2003. Owing to the great depth of water in much of study area (in excess of 150 feet), the return flow and septic-tank seepage takes years to decades to reach the water table. Stable-isotope data indicate that the source of ground-water recharge was precipitation from storms passing through the San Gorgonio Pass as opposed to runoff from the higher altitudes of the San Bernar

Scientific Investigations Report↗
USGS2001

Upper crustal structure in Puget Lowland, Washington: Results from the 1998 Seismic Hazards Investigation in Puget Sound

A new three-dimensional (3-D) model shows seismic velocities beneath the Puget Lowland to a depth of 11 km. The model is based on a tomographic inversion of nearly one million first-arrival travel times recorded during the 1998 Seismic Hazards Investigation in Puget Sound (SHIPS), allowing higher-resolution mapping of subsurface structures than previously possible. The model allows us to refine the subsurface geometry of previously proposed faults (e.g., Seattle, Hood Canal, southern Whidbey Island, and Devils Mountain fault zones) as well as to identify structures (Tacoma, Lofall, and Sequim fault zones) that warrant additional study. The largest and most important of these newly identified structures lies along the northern boundary of the Tacoma basin; we informally refer to this structure here as the Tacoma fault zone. Although tomography cannot provide information on the recency of motion on any structure, Holocene earthquake activity on the Tacoma fault zone is suggested by seismicity along it and paleoseismic evidence for abrupt uplift of tidal marsh deposits to its north. The tomography reveals four large, west to northwest trending low-velocity basins (Tacoma, Seattle, Everett, and Port Townsend) separated by regions of higher velocity ridges that are coincident with fault-bounded uplifts of Eocene Crescent Formation basalt and pre-Tertiary basement. The shapes of the basins and uplifts are similar to those observed in gravity data; gravity anomalies calculated from the 3-D tomography model are in close agreement with the observed anomalies. In velocity cross sections the Tacoma and Seattle basins are asymmetric: the basin floor dips gently toward a steep boundary with the adjacent high-velocity uplift, locally with a velocity "overhang" that suggests a basin vergent thrust fault boundary. Crustal fault zones grow from minor folds into much larger structures along strike. Inferred structural relief across the Tacoma fault zone increases by several kilometers westward along the fault zone to Lynch Cove, where we interpret it as a zone of south vergent faulting overthrusting Tacoma basin. In contrast, structural relief along the Seattle fault zone decreases west of Seattle, which we interpret as evidence that the N-S directed compression is being accommodated by slip transfer between the Seattle and Tacoma fault zones. Together, the Tacoma and Seattle fault zones raise the Seattle uplift, one of a series of east-west trending, pop-up structures underlying Puget Lowland from the Black Hills to the San Juan Islands.

Washington↗
USGS2000

Hydrogeology and the distribution of salinity in the Floridan Aquifer system, southwestern Florida

A study was conducted to establish a detailed hydrogeologic framework in the complex Floridan aquifer system of southwestern Florida, and to evaluate and relate the distribution of salinity found in this system. The Floridan aquifer system consists of the Upper Floridan aquifer, middle confining unit, and Lower Floridan aquifer. The Upper Floridan aquifer extends into a basal unit of the Hawthorn Group; however, a regional unconformity present at the base of this unit generally marks the top of the Floridan aquifer system, as it does in the rest of southern Florida. The basal Hawthorn unit, which is defined at its top by a correlative marker unit, ranges in thickness from 120 to 460 feet. Paleotopography present prior to deposition of the basal Hawthorn unit, which resulted at least in part from erosion, is believed to have caused some of this variation in thickness. However, in some areas where the basal Hawthorn unit is thick, particularly in Lee County, depositional buildup created paleotopographic highs at the top of the unit. In these areas, permeable limestone zones are present in the unit, giving the unit a high transmissivity. In most of the study area, the Floridan aquifer system can be divided into a brackish-water zone, a salinity transition zone, and a saline-water zone. The brackish-water zone contains water with a dissolved-solids concentration of less than 10,000 milligrams per liter. The saline-water zone has a dissolved-solids concentration of at least 35,000 milligrams per liter and a salinity similar to that of seawater. The salinity transition zone that separates these two zones is usually 150 feet or less in thickness. The altitude of the base of the brackish-water zone was mapped primarily using geophysical logs; it ranges from as shallow as 565 feet below sea level along the coast to almost 2,200 feet below sea level inland. This mapping indicated that the boundary represents a salinity interface, the depth of which is controlled by head in the brackish-water zone. Chloride concentrations in the upper part of the brackish-water zone range from 400 to 4,000 milligrams per liter. A large area of relatively low salinity in north-central Collier County and to the northwest, as defined by a 1,200-milligram-per-liter chloride-concentration line, coincides with a high area on the basal contact of the Hawthorn Group. As this contact dips away from this high area to central Hendry and southwestern Collier Counties, chloride concentration increases to 2,000 milligrams per liter or greater. However, the increase in salinity in these areas occurs only in the basal Hawthorn unit or Suwannee Limestone, but not in deeper units. In central Hendry County, the increase occurs only in the basal Hawthorn unit in an area where the unit is well developed and thick. These areas of higher salinity could have resulted from the influx of seawater from southwestern Collier County into zones of higher permeability in the Upper Floridan aquifer during high sea-level stands. The influx may only have occurred in structurally low areas and may have experienced incomplete flushing subsequently by the modern freshwater flow system. In an area in north-central Collier County, the altitude of the base of the brackish-water zone is anomalously deep given the position of this area relative to the coast. In this area, the base extends as deep as 2,090 feet below sea level, and the salinity transition zone is not present or is poorly defined. The origin of this anomalous area is interpreted to be related to the development of a unit containing thick dolomite and evaporite beds high in the middle confining unit of the Floridan aquifer system. The top of this dolomite-evaporite unit, which probably has very low permeability, occurs at the base of the brackish-water zone in this area. The axis of a high area mapped at the top of the unit trends to the northwest from central Collier County into north-central Lee County. This axis parallels and lies just to the west of the anomalous area, and it could have acted as an impermeable sill, preventing saline water from moving in laterally from the coast to the southwest and up from the Lower Floridan aquifer. Locating a Floridan aquifer system well field in or near this anomalous area could be optimal because of the lack of a salinity interface at depth.

Water-Resources Investigations Report↗
USGS2002

Fault structure and mechanics of the Hayward Fault, California from double-difference earthquake locations

The relationship between small-magnitude seismicity and large-scale crustal faulting along the Hayward Fault, California, is investigated using a double-difference (DD) earthquake location algorithm. We used the DD method to determine high-resolution hypocenter locations of the seismicity that occurred between 1967 and 1998. The DD technique incorporates catalog travel time data and relative P and S wave arrival time measurements from waveform cross correlation to solve for the hypocentral separation between events. The relocated seismicity reveals a narrow, near-vertical fault zone at most locations. This zone follows the Hayward Fault along its northern half and then diverges from it to the east near San Leandro, forming the Mission trend. The relocated seismicity is consistent with the idea that slip from the Calaveras Fault is transferred over the Mission trend onto the northern Hayward Fault. The Mission trend is not clearly associated with any mapped active fault as it continues to the south and joins the Calaveras Fault at Calaveras Reservoir. In some locations, discrete structures adjacent to the main trace are seen, features that were previously hidden in the uncertainty of the network locations. The fine structure of the seismicity suggests that the fault surface on the northern Hayward Fault is curved or that the events occur on several substructures. Near San Leandro, where the more westerly striking trend of the Mission seismicity intersects with the surface trace of the (aseismic) southern Hayward Fault, the seismicity remains diffuse after relocation, with strong variation in focal mechanisms between adjacent events indicating a highly fractured zone of deformation. The seismicity is highly organized in space, especially on the northern Hayward Fault, where it forms horizontal, slip-parallel streaks of hypocenters of only a few tens of meters width, bounded by areas almost absent of seismic activity. During the interval from 1984 to 1998, when digital waveforms are available, we find that fewer than 6.5% of the earthquakes can be classified as repeating earthquakes, events that rupture the same fault patch more than one time. These most commonly are located in the shallow creeping part of the fault, or within the streaks at greater depth. The slow repeat rate of 2–3 times within the 15-year observation period for events with magnitudes around M = 1.5 is indicative of a low slip rate or a high stress drop. The absence of microearthquakes over large, contiguous areas of the northern Hayward Fault plane in the depth interval from ∼5 to 10 km and the concentrations of seismicity at these depths suggest that the aseismic regions are either locked or retarded and are storing strain energy for release in future large-magnitude earthquakes.

California↗
USGS2004

Hydrogeology, water quality, and distribution and sources of salinity in the Floridan aquifer system, Martin and St. Lucie Counties, Florida

The Floridan aquifer system is considered to be a valuable source for agricultural and municipal water supply in Martin and St. Lucie Counties, despite its brackish water. Increased withdrawals, however, could increase salinity and threaten the quality of withdrawn water. The Floridan aquifer system consists of limestone, dolomitic limestone, and dolomite and is divided into three hydrogeologic units: the Upper Floridan aquifer, a middle confining unit, and the Lower Floridan aquifer. An informal geologic unit at the top of the Upper Floridan aquifer, referred to as the basal Hawthorn/Suwannee unit, is bound above by a marker unit in the Hawthorn Group and at its base by the Ocala Limestone; a map of this unit shows an area where substantial eastward thickening begins near the coast. This change in thickness is used to divide the study area into inland and coastal areas. In the Upper Floridan aquifer, an area of elevated chloride concentration greater than 1,000 milligrams per liter and water temperature greater than 28 degrees Celsius exists in the inland area and trends northwest through north-central Martin County and western St. Lucie County. A structural feature coincides with this area of greater salinity and water temperature; this feature is marked by a previously mapped northwest-trending basement fault and, based on detailed mapping in this study of the structure at the top of the basal Hawthorn/Suwannee unit, an apparent southeast-trending trough. Higher hydraulic head also has been mapped in this northwest-trending area. Another area of high chloride concentration in the Upper Floridan aquifer occurs in the southern part of the coastal area (in eastern Martin County and northeastern Palm Beach County); chloride concentration in this area is more than 2,000 milligrams per liter and is as great as 8,000 milligrams per liter. A dissolved-solids concentration of less than 10,000 milligrams per liter defines the brackish-water zone in the Floridan aquifer system; the top and base of this zone are present at the top of the aquifer system and within the Lower Floridan aquifer, respectively. The base of the brackish-water zone, which can approximate a brackish-water/saltwater interface, was determined in 13 wells, mostly using resistivity geophysical logs. The depth to the saltwater interface was calculated using the Ghyben-Herzberg approximation and estimated predevelopment hydraulic heads in the Upper Floridan aquifer. In five of six inland area wells, the depth to the base of the brackish-water zone was substantially shallower than the estimated predevelopment interface (260 feet or greater), whereas in five of seven coastal area wells, the difference was not large (less than about 140 feet). Confining units in the inland area, such as dense dolomite, may prevent an interface from forming at its equilibrium position. Because of head decline, the calculated interface using recent (May 2001) water levels is as much as 640 ft above the base of the brackish water zone (in the northern part of the coastal area). Isotopic data collected during this study, including deuterium and oxygen-18 (18O/16O), the ratio of strontium-87 to strontium-86, and carbon-13 (13C/12C) and carbon-14, provide evidence for differences in the Floridan aquifer system ground-water geochemistry and its evolution between inland and coastal areas. Ground water from the inland area tends to be older than water from the coastal area, particularly where inland area water temperature is elevated. Isotopic data together with an anomalous vertical distribution of salinity in the coastal area indicate that the coastal area was invaded with seawater in relatively recent geologic time, and this water has not been completely flushed out by the modern-day flow system. Upward leakage from the Lower to Upper Floridan aquifer of high salinity water occurs through structural deformities, such as faults or fracture zones or associated dissolution features in the inland area. An upward trend in salinity is indicated in 16 monitoring wells in the inland area, and agricultural withdrawals are probably causing these increases. Most of these wells are located in areas of elevated Upper Floridan aquifer ground-water temperature. Areas of higher water temperature could represent areas of greater potential for increases in salinity. More detailed mapping of the structure of the uppermost geologic units in the aquifer system could better define areas of deformation. Additionally, high potential exists in much of the study area for upward or lateral movement of the saltwater interface because of large declines in hydraulic head since predevelopment. The northern part of the coastal area has the greatest potential for movement; however, upward movement of the interface in the coastal area could be retarded by low vertical permeability. The potential for upward or lateral movement of the interface in the southern part of the coastal area seems to be low, but structural deformation could be present in northeastern Palm Beach County, allowing for localized upward leakage of saltwater.

Florida↗
USGS2011

Geologic map of the Ganiki Planitia quadrangle (V-14), Venus

The Ganiki Planitia (V-14) quadrangle on Venus, which extends from 25° N. to 50° N. and from 180° E. to 210° E., derives its name from the extensive suite of plains that dominates the geology of the northern part of the region. With a surface area of nearly 6.5 x 10 6 km 2 (roughly two-thirds that of the United States), the quadrangle is located northwest of the Beta-Atla-Themis volcanic zone and southeast of the Atalanta Planitia lowlands, areas proposed to be the result of large scale mantle upwelling and downwelling, respectively. The region immediately south of Ganiki Planitia is dominated by Atla Regio, a major volcanic rise beneath which localized upwelling appears to be ongoing, whereas the area just to the north is dominated by the orderly system of north-trending deformation belts that characterize Vinmara Planitia. The Ganiki Planitia quadrangle thus lies at the intersection between several physiographic regions where extensive mantle flow-induced tectonic and volcanic processes are thought to have occurred. The geology of the V-14 quadrangle is characterized by a complex array of volcanic, tectonic, and impact-derived features. There are eleven impact craters with diameters from 4 to 64 km, as well as four diffuse 'splotch' features interpreted to be the product of near-surface bolide explosions. Tectonic activity has produced heavily deformed tesserae, belts of complex deformation and rifts as well as a distributed system of fractures and wrinkle ridges. Volcanic activity has produced extensive regional plains deposits, and in the northwest corner of the quadrangle these plains host the initial (or terminal) 700 km of the Baltis Vallis canali, an enigmatic volcanic feature with a net length of ~7,000 km that is the longest channel on Venus. Major volcanic centers in V-14 include eight large volcanoes and eight coronae; all but one of these sixteen features was noted during a previous global survey. The V-14 quadrangle contains an abundance of minor volcanic features including individual shield volcanoes and localized fissure eruptions as well as many small annular structures and domes, which often serve as the source for local lava flows. The topographic and geophysical characteristics of the Ganiki Planitia quadrangle are less complex than the surface geology, but they yield equally valuable information about the region’s formation and evolution. Referenced to the mean planetary radius of 6051.84 km, the average elevation in the quadrangle is -0.26±0.86 km (2σ) with a full range of -2.58 km to 1.85 km. The highest 2.5 percent of elevations in the quadrangle (above 0.60 km) are associated primarily with the major tessera blocks and the peaks of a few volcanic edifices, whereas the lowest 2.5 percent (below -1.12 km) mostly occur within corona interiors and in the northwest corner of the quadrangle where the plains begin to merge into the Atalanta Planitia lowlands. At the ~4.6 km/pixel scale of the topography data, the mean point-to-point topographic slope is 0.63° and topographic slopes greater than 2° cover less than 5 percent of the region. Overall, the topography of the Ganiki Planitia quadrangle can be characterized as flat, low lying, and nearly devoid of abrupt topographic variation. Complementing this gentle topography, the geoid anomaly has a generally linear gradient that decreases north-northwest from a high of ~20 m at the southern edge of the quadrangle (the northern border of the Atla Regio anomaly) to a low of -30 to -40 m along the northern edge (Konopliv and others, 1999). The vertical component of the gravity anomaly varies from ~50 mGal to -40 mGal, and integrated analysis of the gravity and topography data indicates that dynamically supported regions and areas of thickened crust are both present within the quadrangle. Because the Ganiki Planitia quadrangle is a plains-dominated lowland area that lies between several major physiographic provinces (namely, Atla Regio, Atalanta Planitia, and Vinmara Planitia), a geologic map of the region may yield insight into a wide array of important problems in Venusian geology. The current mapping effort and analysis complements previous efforts to characterize aspects of the region’s geology, for example stratigraphy near parabolic halo crater sites, volcanic plains emplacement, wrinkle ridges, volcanic feature distribution, volcano deformation, coronae characteristics, lithospheric flexure, and various features along a 30±7.58° N. geotraverse. Our current research focuses on addressing four specific questions. Has the dominant style of volcanic expression within the quadrangle varied in a systematic fashion over time? Does the tectonic deformation within the quadrangle record significant regional patterns that vary spatially or temporally, and if so what are the scales, orientations and sources of the stress fields driving this deformation? If mantle upwelling and downwelling have played a significant role in the formation of Atla Regio and Atalanta Planitia as has been proposed, does the geology of Ganiki Planitia record evidence of northwest-directed lateral mantle flow connecting the two sites? Finally, can integration of the tectonic and volcanic histories preserved within the quadrangle help constrain competing resurfacing models for Venus?

Scientific Investigations Map↗
USGS1998

Geohydrology and distribution of volatile organic compounds in ground water in the Casey Village area, Bucks County, Pennsylvania

Casey Village and the adjoining part of the U.S. Naval Air Warfare Center (NAWC) are underlain by the Late Triassic-age Stockton Formation, which consists of a dipping series of siltstones and sandstones. The direction of vertical ground-water gradients in the Stockton Formation varies among well locations and sometimes with time. Vertical gradients can be substantial; the difference in water levels at one well pair (two wells screened at different depths) was 7.1 ft (feet) over a 32-ft vertical section of the aquifer. Potentiometric-surface maps show a groundwater divide that bisects the Casey Village area. For wells screened between 18 and 64 ft below land surface (bls), the general ground-water gradient is to the east and northeast on the east side of the divide and to the south and southwest on the west side of the divide. For wells screened between 48 and 106 ft bls, the general ground-water gradient is to the northeast on the east side of the divide and to the southwest and northwest on the west side of the divide. An aquifer test at one well in Casey Village caused drawdown in wells on the opposite side of the ground-water divide on the NAWC and shifted the ground-water divide in the deeper potentiometric surface to the west. Drawdowns formed an elliptical pattern, which indicates anisotropy; however, anisotropy is not aligned with strike or dip. Hydraulic stress caused by pumping crosses stratigraphic boundaries. Between 1993 and 1996, the trichloroethylene (TCE) concentration in water samples collected from wells in Casey Village decreased. The highest concentration of TCE measured in water from one well decreased from 1,200 mg/L (micrograms per liter) in 1993 when domestic wells were pumped in Casey Village to 140 mg/L in 1996, 3 years after the installation of public water and the cessation of domestic pumping. This suggests that pumping of domestic wells may have contributed to TCE migration. Between 1993 and 1996, the tetrachloroethylene (PCE) concentration in water samples collected from wells in Casey Village decreased only slightly. The highest concentration of PCE measured in water from one well decreased from 720 mg/L in 1993 to 630 mg/L in 1996. The distribution of TCE and PCE in ground water indicates the presence of separate PCE and TCE plumes, each with a different source area. The TCE plume appears to be moving in two directions away from the ground-water divide area. The pumping of a domestic well may have caused TCE migration into the ground-water divide area. From the divide area, the TCE plume appears to be moving both to the east and the west under the natural hydraulic gradient. Aquifer-isolation tests conducted in the well with the highest TCE concentrations showed that concentrations of TCE in water samples from the isolated intervals were similar but slightly lower in the deeper isolated zones than in the shallower isolated zones. Upward flow was measured in this well during geophysical logging. If the source of TCE to the well was from shallow fractures, upward flow of less contaminated water could be flushing TCE from the immediate vicinity of this well. This may help explain why the concentration of TCE in water from this well decreased an order of magnitude between 1993 and 1996.

Water-Resources Investigations Report↗
USGS1999

Ground-water system, estimation of aquifer hydraulic properties, and effects of pumping on ground-water flow in Triassic sedimentary rocks in and near Lansdale, Pennsylvania

Ground water in Triassic-age sedimentary fractured-rock aquifers in the area of Lansdale, Pa., is used as drinking water and for industrial supply. In 1979, ground water in the Lansdale area was found to be contaminated with trichloroethylene, tetrachloroethylene, and other man-made organic compounds, and in 1989, the area was placed on the U.S. Environmental Protection Agency's (USEPA) National Priority List as the North Penn Area 6 site. To assist the USEPA in the hydrogeological assessment of the site, the U.S. Geological Survey began a study in 1995 to describe the ground-water system and to determine the effects of changes in the well pumping patterns on the direction of ground-water flow in the Lansdale area. This determination is based on hydrologic and geophysical data collected from 1995-98 and on results of the simulation of the regional ground-water-flow system by use of a numerical model. Correlation of natural-gamma logs indicate that the sedimentary rock beds strike generally northeast and dip at angles less than 30 degrees to the northwest. The ground-water system is confined or semi-confined, even at shallow depths; depth to bedrock commonly is less than 20 feet (6 meters); and depth to water commonly is about 15 to 60 feet (5 to 18 meters) below land surface. Single-well, aquifer-interval-isolation (packer) tests indicate that vertical permeability of the sedimentary rocks is low. Multiple-well aquifer tests indicate that the system is heterogeneous and that flow appears primarily in discrete zones parallel to bedding. Preferred horizontal flow along strike was not observed in the aquifer tests for wells open to the pumped interval. Water levels in wells that are open to the pumped interval, as projected along the dipping stratigraphy, are drawn down more than water levels in wells that do not intersect the pumped interval. A regional potentiometric map based on measured water levels indicates that ground water flows from Lansdale towards discharge areas in three drainages, the Wissahickon, Towamencin, and Neshaminy Creeks. Ground-water flow was simulated for different pumping patterns representing past and current conditions. The three-dimensional numerical flow model (MODFLOW) was automatically calibrated by use of a parameter estimation program (MODFLOWP). Steady-state conditions were assumed for the calibration period of 1996. Model calibration indicates that estimated recharge is 8.2 inches (208 millimeters) and the regional anisotropy ratio for the sedimentary-rock aquifer is about 11 to 1, with permeability greatest along strike. The regional anisotropy is caused by up- and down-dip termination of high-permeability bed-oriented features, which were not explicitly simulated in the regional-scale model. The calibrated flow model was used to compare flow directions and capture zones in Lansdale for conditions corresponding to relatively high pumping rates in 1994 and to lower pumping rates in 1997. Comparison of the 1994 and 1997 simulations indicates that wells pumped at the lower 1997 rates captured less ground water from known sites of contamination than wells pumped at the 1994 rates. Ground-water flow rates away from Lansdale increased as pumpage decreased in 1997. A preliminary evaluation of the relation between ground-water chemistry and conditions favorable for the degradation of chlorinated solvents was based on measurements of dissolved-oxygen concentration and other chemical constituents in water samples from 92 wells. About 18 percent of the samples contained less than or equal to 5 milligrams per liter dissolved oxygen, a concentration that indicates reducing conditions favorable for degradation of chlorinated solvents.

Water-Resources Investigations Report↗
USGS2001

Hydrogeologic framework and geochemistry of the intermediate aquifer system in parts of Charlotte, De Soto, and Sarasota counties, Florida

The hydrogeologic framework underlying the 600-square-mile study area in Charlotte, De Soto, and Sarasota Counties, Florida, consists of the surficial aquifer system, the intermediate aquifer system, and the Upper Floridan aquifer. The hydrogeologic framework and the geochemical processes controlling ground-water composition were evaluated for the study area. Particular emphasis was given to the analysis of hydrogeologic and geochemical data for the intermediate aquifer system. Flow regimes are not well understood in the intermediate aquifer system; therefore, hydrogeologic and geochemical information were used to evaluate connections between permeable zones within the intermediate aquifer system and between overlying and underlying aquifer systems. Knowledge of these connections will ultimately help to protect ground-water quality in the intermediate aquifer system. The hydrogeology was interpreted from lithologic and geophysical logs, water levels, hydraulic properties, and water quality from six separate well sites. Water-quality samples were collected from wells located along six ground-water flow paths and finished at different depth intervals. The selection of flow paths was based on current potentiometric-surface maps. Ground-water samples were analyzed for major ions; field parameters (temperature, pH, specific conductance, and alkalinity); stable isotopes (deuterium, oxygen-18, and carbon-13); and radioactive isotopes (tritium and carbon-14). The surficial aquifer system is the uppermost aquifer, is unconfined, relatively thin, and consists of unconsolidated sand, shell, and limestone. The intermediate aquifer system underlies the surficial aquifer system and is composed of clastic sediments interbedded with carbonate rocks. The intermediate aquifer system is divided into three permeable zones, the Tamiami/Peace River zone (PZ1), the Upper Arcadia zone (PZ2), and the Lower Arcadia zone (PZ3). The Tamiami/Peace River zone (PZ1) is the uppermost zone and is the thinnest and generally, the least productive zone in the intermediate aquifer system. The Upper Arcadia zone (PZ2) is the middle zone and productivity is generally higher than the overlying permeable zone. The Lower Arcadia zone (PZ3) is the lowermost permeable zone and is the most productive zone in the intermediate aquifer system. The intermediate aquifer system is underlain by the Upper Floridan aquifer, which consists of a thick, stratified sequence of limestone and dolomite. The Upper Floridan aquifer is the most productive aquifer in the study area; however, its use is generally restricted because of poor water quality. Interbedded clays and fine-grained clastics separate the aquifer systems and permeable zones. The hydraulic properties of the three aquifer systems are spatially variable. Estimated trans-missivity and horizontal hydraulic conductivity varies from 752 to 32,900 feet squared per day and from 33 to 1,490 feet per day, respectively, for the surficial aquifer system; from 47 to 5,420 feet squared per day and from 2 to 102 feet per day, respectively, for the Tamiami/Peace River zone (PZ1); from 258 to 24,633 feet squared per day and from 2 to 14 feet per day, respectively, for the Upper Arcadia zone (PZ2); from 766 to 44,900 feet squared per day and from 10 to 201 feet per day, respectively, for the Lower Arcadia zone (PZ3); and from 2,350 to 7,640 feet squared per day and from 10 to 41 feet per day, respectively, for the Upper Floridan aquifer. Confining units separating the aquifer systems have leakance coefficients estimated to range from 2.3 x 10-5 to 5.6 x 10-3 feet per day per foot. Strata composing the confining unit separating the Upper Floridan aquifer from the intermediate aquifer system are substantially more permeable than confining units separating the permeable zones in the intermediate aquifer system or separating the surficial aquifer and intermediate aquifer systems. In Charlotte, Sarasota, and western De Soto Counties, hydraulic

Water-Resources Investigations Report↗
USGS2004

Hydrogeologic characteristics of four public drinking-water supply springs in northern Arkansas

In October 2000, a study was undertaken by the U.S. Geological Survey (USGS) in cooperation with the Arkansas Department of Health to determine the hydrogeologic characteristics, including the extent of the recharge areas, for Hughes Spring, Stark Spring, Evening Shade Spring, and Roaring Spring, which are used for public-water supply in northern Arkansas. Information pertaining to each spring can be used to enable development of effective management plans to protect these water resources and public health. An integrated approach to determine the ground-water characteristics and the extent of the local recharge areas of the four springs incorporated tools and methods of hydrology, structural geology, geomorphology, geophysics, and geochemistry. Analyses of discharge, temperature, and water quality were completed to describe ground-water flow characteristics, source-water characteristics, and connectivity of the ground-water system with surface runoff. Water-level contour maps were constructed to determine ground-water flow directions and ground-water tracer tests were conducted to determine the extent of the recharge areas and ground-water flow velocities. Hughes Spring supplies water for the city of Marshall, Arkansas, and the surrounding area. The mean annual discharge for Hughes Spring was 2.9 and 5.2 cubic feet per second for water years 2001 and 2002, respectively. Recharge to the spring occurs mainly from the Boone Formation (Springfield Plateau aquifer). Ground-water tracer tests indicate the recharge area for Hughes Spring generally coincides with the surface drainage area (15.8 square miles) and that Hughes Spring is connected directly to the surface flow in Brush Creek. The geochemistry of Hughes Spring demonstrated variations with flow conditions and the influence of surface-runoff in the recharge area. Calcite saturation indices, total dissolved solids concentrations, and hardness demonstrate noticeable differences with flow conditions reflecting the reduced residence time and interaction of water with the source rock within the ground-water system at higher discharges for Hughes Spring. Concentrations of fecal indicator bacteria also demonstrated a substantial increase during high-flow conditions, suggesting that a non-point source of bacteria possibly from livestock may enter the system. Conversely, nutrient concentrations did not vary with flow and were similar to concentrations reported for undeveloped sites in the Springfield Plateau and Ozark aquifers in northern Arkansas and southern Missouri. Deuterium and oxygen-18 data show that the Hughes Spring discharge is representative of direct precipitation and not influenced by water enriched in oxygen-18 through evaporation. Discharge data show that Hughes Spring is dominated by conduit type ground-water flow, but a considerable component of diffuse flow also exists in the ground-water system. Carbon-13 data indicate a substantial component of the recharge water interacts with the surface material (soil and regolith) in the recharge area before entering the ground-water system for Hughes Spring. Tritium data for Hughes Spring indicate that the discharge water is a mixture of recent recharge and sub-modern water (recharged prior to 1952). Stark Spring supplies water for the city of Cushman, Arkansas, and the surrounding area. 2 Hydrogeologic Characteristics of Four Public Drinking-Water Supply Springs in Northern Arkansas The mean annual discharge for Stark Spring was 0.5 and 1.5 cubic feet per second for water years 2001 and 2002, respectively. The discharge and water-quality data show the ground-water system for Stark Spring is dominated by rapid recharge from surface runoff and mainly consists of a conduit- type flow system with little diffuse-type flow. Analyses of discharge data show that the estimated recharge area (0.79 square mile) is larger than the surface drainage area (0.34 square mile). Ground-water tracer tests and the outcrop of the

Water-Resources Investigations Report↗
USGS2018

Geohydrology, geochemistry, and numerical simulation of groundwater flow and land subsidence in the Bicycle Basin, Fort Irwin National Training Center, California

Groundwater pumping from Bicycle Groundwater Basin (referred to as Bicycle Basin) in the Fort Irwin National Training Center, California, began in 1967. From 1967 to December 2010, about 46,000 acre-feet of water had been pumped from the basin and transported to the Irwin Basin. During this time, not only did water levels in the basin decline by as much as 100 feet, the quality of the groundwater pumped from the basin also deteriorated in some wells. The U.S. Geological Survey collected geohydrologic data from existing wells, test holes, and 16 additional monitoring wells installed at 6 sites in Bicycle Basin during 1992–2011 to determine the quantity and quality of groundwater available in the basin. Geophysical surveys, including electrical, gravity, and seismic refraction surveys, were completed to help determine the geometry of the structural basin, delineate depths to the interface between Quaternary and Tertiary rocks, map the depth to the water table, and used to develop a geohydrologic framework and groundwater-flow model for Bicycle Basin. Water samples were used to determine the groundwater quality in the basin and to delineate potential sources of poor-quality groundwater. Analysis of stable isotopes of oxygen and hydrogen in groundwater indicated that presentday precipitation is not a major source of recharge to the basin. Tritium and carbon-14 data indicated that most of the groundwater in the basin was recharged prior to 1952 and had an apparent age of 15,625–39,350 years. Natural recharge to the basin was not sufficient to replenish the groundwater pumped from the basin. Interferograms from synthetic aperture radar data (InSAR), analyzed to evaluate land-surface subsidence between 1993 and 2010, showed 0.23 to 1.1 feet of subsidence during this period near one production well north of Bicycle Lake (dry) playa. A groundwater-flow model of Bicycle Basin was developed and calibrated using groundwater levels for 1964– 2010, and a subsidence model using land-surface deformation data for 1993–2010. Between January 1967 and December 2010, the simulated total recharge from precipitation runoff and underflow from adjacent basins was about 5,100 acre-feet and pumpage from the Bicycle Basin was about 47,000 acrefeet of water. Total outflows exceeded natural recharge during this period, resulting in a net loss of about 42,100 acre-feet of groundwater storage in the basin. The Fort Irwin National Training Center is considering various groundwater-management options in the Bicycle Basin. The groundwater-flow model was used to (1) evaluate changes in groundwater levels and subsidence with the addition of capture and recharge of simulated runoff in retention basins (scenario 1) for predevelopment through 2010; (2) simulate a base case (scenario 2) for reference; and (3) compare projections of alternative future pumping strategies for 2011–60 (scenarios 3–5). Model results from the runoff-capture simulation (scenario 1) indicated that total recharge, including runoff captured using retention basins, locally increased water levels, which partially offset, but did not mitigate, groundwater depletion associated with pumping. Groundwater-storage depletion in scenario 1 was about 14 percent less than without runoff capture. Simulated-drawdown results in model layer 1 in the eastern part of the basin indicated that, because of the captured runoff, simulated heads were as much as 100 feet higher in December 2010 than prior to the onset of development in 1967. In contrast, simulated drawdown for model without runoff capture indicated that, without captured runoff, simulated heads for December 2010 in this area were 80–90 feet lower than during the predevelopment period. Subsidence was mitigated slightly in scenario 1 compared to without runoff capture; the largest decrease in subsidence at observation sites was about 0.07 feet.

California↗
USGS2015

Aquifer geometry, lithology, and water levels in the Anza–Terwilliger area—2013, Riverside and San Diego Counties, California

The population of the Anza–Terwilliger area relies solely on groundwater pumped from the alluvial deposits and surrounding bedrock formations for water supply. The size, characteristics, and current conditions of the aquifer system in the Anza–Terwilliger area are poorly understood, however. In response to these concerns, the U.S. Geological Survey, in cooperation with the High Country Conservancy and Rancho California Water District, undertook a study to (1) improve mapping of groundwater basin geometry and lithology and (2) to resume groundwater-level monitoring last done during 2004–07 in the Anza–Terwilliger area. Inversion of gravity data, including new data collected for this study, was done to estimate the thickness of the alluvial deposits that form the Cahuilla and Terwilliger groundwater basins and to understand the geometry of the underlying basement complex. After processing of the gravity data, the thickness of the alluvial aquifer materials was modeled by using all available lithology, density, and geophysical data. The thickest alluvial deposits (greater than 500 feet) are in the northern part of the study area along the south side of the San Jacinto fault zone, in the southern part of the Cahuilla groundwater basin, and in the western part of the Terwilliger groundwater basin. Through most of the area of alluvial materials, the thickness of the alluvium estimated from gravity data is less than 400 feet. Analysis of more than 900 drillers’ logs indicated that in areas having relatively thick alluvium, particularly along the San Jacinto fault zone and in the Terwilliger Valley, the alluvium is predominantly composed of sands and gravels. Fine-textured sediments appeared to be discontinuous rather than forming laterally extensive, low-permeability layers. More than 500 drillers’ logs indicated only bedrock is present, indicating that the fractured bedrock is an important source of groundwater, primarily for domestic use, in the study area. The depths of the holes drilled into the bedrock indicated that fractures potentially supplying water to wells persist in the upper few hundred feet and that the permeable zone of the fractured bedrock extends to depths greater than weathered zones in the upper part of the basement complex. Water-level data were collected from 59 wells during fall 2013. These data indicated that hydraulic head did not vary substantially with well depth and that the measured water levels in bedrock and alluvium were similar. Large offsets in groundwater altitude across the San Jacinto fault zone indicated that the fault zone is a barrier to groundwater flow in the northeastern part of the Anza Valley. On the basis of data from 33 wells, water levels mostly declined between the fall of 2006 and the fall of 2013; the median decline was 5.1 feet during this period, for a median rate of decline of about 0.7 feet/year. Based on data from 40 wells, water-level changes between fall 2004 and fall 2013 were variable in magnitude and trend, but had a median decline of 2.4 feet and a median rate of decline of about 0.3 feet/ year. These differences in apparent rates of groundwater-level change highlight the value of ongoing water-level measurements to distinguish decadal, or longer term, trends in groundwater storage often associated with climatic variability and trends. Fifty-four long-term hydrographs indicated the sensitivity of groundwater levels to climatic conditions; they also showed a general decline in water levels across the study area since 1986 and, in some cases, dating back to the 1950s.

California↗
USGS2011

Groundwater conditions and studies in the Augusta–Richmond County area, Georgia, 2008–2009

Groundwater studies and monitoring efforts conducted during 2008–2009, as part of the U.S. Geological Survey (USGS) Cooperative Water Program with the City of Augusta in Richmond County, Georgia, provided data for the effective management of local water resources. During 2008–2009 the USGS completed: (1) installation of three monitoring wells and the collection of lithologic and geophysical logging data to determine the extent of hydrogeologic units, (2) collection of continuous groundwater-level data from wells near Well Fields 2 and 3, (3) collection of synoptic groundwater-level measurements and construction of potentiometric-surface maps in Richmond County to establish flow gradients and groundwater-flow directions in the Dublin and Midville aquifer systems, (4) completion of a 24-hour aquifer test to determine hydraulic characteristics of the lower Dublin aquifer, and upper and lower Midville aquifers in Well Field 2, and (5) collection of groundwater samples from selected wells in Well Field 2 for laboratory analysis of volatile organic compounds and groundwater tracers to assess groundwater quality and estimate the time of groundwater recharge. Potentiometric-surface maps of the Dublin and Midville aquifer systems for 2008–2009 indicate that the general groundwater flow direction within Richmond County is eastward toward the Savannah River, with the exception of the area around Well Field 2, where pumping interrupts the eastward flow of water toward the Savannah River and causes flow lines to bend toward the center of pumping. Results from a 24-hour aquifer test conducted in 2009 within the upper and lower Midville aquifers at Well Field 2 indicated a transmissivity and storativity for the upper and lower Midville aquifers, combined, of 4,000 feet-squared per day and 2x10 -4 , respectively. The upper and lower Midville aquifers and the middle lower Midville confining unit, which is 85-feet thick in this area, yielded horizontal hydraulic conductivity and specific storage values of about 45 feet per day and 2x10 -6 ft -1 , respectively. Results from the 24-hour aquifer test also indicate a low horizontal hydraulic conductivity for the lower Dublin aquifer of less than 1 foot per day. Of the 35 volatile organic compounds (VOCs) analyzed in 23 groundwater samples during 2008–2009, only six were detected above laboratory reporting limits in samples from eight wells. No concentration in groundwater samples collected during 2008–2009 exceeded drinking water standards. Trichloroethene had the maximum VOC concentration (1.9 micrograms per liter) collected from a water sample during 2008–2009. Water-quality sampling of several wells near Well Field 2 indicate that, while in operation, the northernmost production well might have diverted groundwater, containing low levels of trichloroethene from at least two other production wells. Analysis of sulfur hexafluoride data indicate the average year of recharge ranges between 1981 and 1984 for water samples from five wells open to the upper and lower Midville aquifers, and 1991 for a water sample from one shallow well open to the lower Dublin aquifer. All of these ages suggest a short flow path and nearby source of contamination. The actual source of low levels of VOCs at Well Field 2 remains unknown. Three newly installed monitoring wells indicate that hydrogeologic units beneath Well Fields 2 and 3 are composed of sand and clay layers. Hydrogeologic units, encountered at Well Field 2, in order of increasing depth are the lower Dublin confining unit, lower Dublin aquifer, upper Midville confining unit, upper Midville aquifer, lower Midville confining unit, and lower Midville aquifer. West of Well Field 3, hydrogeologic units, in order of increasing depth are the Upper Three Runs aquifer, Gordon confining unit, Gordon aquifer, lower Dublin confining unit, lower Dublin aquifer, upper Midville confining unit, upper Midville aquifer, lower Midville confining unit, and lower Midville aquifer.

Georgia↗