SEARCH · USGS Science
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This circular contains short topical and summary articles about the results of 1982 geologic studies on a wide range of subjects of economic and scientific interest. Included are lists of references cited for each article and a compilation of reports about Alaska written by members of the U.S. Geological Survey and published by the Geological Survey and other organizations.
Summary form only given. The US Exclusive Economic Zone is an area approximately one and two-thirds the size of the land area of the United States. In this frontier area, US Geological Survey (USGS) research in marine minerals is aimed at three objectives: (1) defining geologic settings of potential mineral resources; (2) understanding the processes by which seafloor nonliving resources form; and (3) estimating the resource potential. Potential resources of primary interest are cobalt-rich manganese seafloor crusts, polymetallic sulfides in hydrothermal vent areas on the seafloor, and heavy-mineral placer deposits. Research activities include studies of manganese-crust samples from oceanographic-institution archives and a USGS research cruise through the central and southern Pacific. Preliminary results confirm that cobalt is concentrated by as much as 2. 5% in the manganese crusts at water depths of 1000-2600 m; further research on the precipitation processes and patterns of crust formation will be needed to understand the origin, occurrence patterns, and resource potential of these crusts. Research cruises have revealed a zone of polymetallic sulfide vent deposits a few hundred meters long in the Juan de Fuca spreading center.
Grade and tonnage models are useful in quantitative mineral-resource assessments. The models and database presented in this report are an update of earlier publications about volcanogenic massive sulfide (VMS) deposits. These VMS deposits include what were formerly classified as kuroko, Cyprus, and Besshi deposits. The update was necessary because of new information about some deposits, changes in information in some deposits, such as grades, tonnages, or ages, revised locations of some deposits, and reclassification of subtypes. In this report we have added new VMS deposits and removed a few incorrectly classified deposits. This global compilation of VMS deposits contains 1,090 deposits; however, it was not our intent to include every known deposit in the world. The data was recently used for mineral-deposit density models (Mosier and others, 2007; Singer, 2008). In this paper, 867 deposits were used to construct revised grade and tonnage models. Our new models are based on a reclassification of deposits based on host lithologies: Felsic, Bimodal-Mafic, and Mafic volcanogenic massive sulfide deposits. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types occur in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment and economists to determine the possible economic viability of these resources. Thus, mineral-deposit models play a central role in presenting geoscience information in a useful form to policy makers. The foundation of mineral-deposit models is information about known deposits. The purpose of this publication is to present the latest geologic information and newly developed grade and tonnage models for VMS deposits in digital form. This publication contains computer files with information on VMS deposits from around the world. It also presents new grade and tonnage models for three subtypes of VMS deposits and a text file allowing locations of all deposits to be plotted in geographic information system (GIS) programs. The data are presented in FileMaker Pro and text files to make the information available to a wider audience. The value of this information and any derived analyses depends critically on the consistent manner of data gathering. For this reason, we first discuss the rules used in this compilation. Next, we provide new grade and tonnage models and analysis of the information in the file. Finally, the fields of the data file are explained. Appendix A gives the summary statistics for the new grade-tonnage models and Appendix B displays the country codes used in the database.
THE GEOLOGIC MAP OF THE SIERRA NEVADA is a core component of the Sierra Nevada Earth Science Atlas, which also includes geophysical, neotectonic, economic, and geochronologic data. The map illustrates the distribution of geologic units across the Sierra Nevada and related adjacent areas. Geologic units are grouped by type and age into three categories: Principally Paleozoic and Mesozoic metasedimentary and metavolcanic wall rocks, most of which are grouped into terranes; Paleozoic and Mesozoic plutons and intrusive suites, which intrude the wall rocks and form the core batholith of the range; and Late Cretaceous and Cenozoic sedimentary and volcanic rocks and surficial deposits that unconformably overlap the older units. Related rock units were combined and simplified for presentation at a scale of 1:400,000, as shown in the list of map units and associated correlation of map units (Plate 1B) and description of map units (Appendix A). Tectonic faulting, folding and uplift have overprinted the rocks and have strongly influenced the spatial distribution of units and the distinct morphology of the Sierra Nevada as we see it today. The Atlas is the result of collaborative work by scientists and mapmakers from the California Geological Survey and the U.S. Geological Survey. The Atlas was originally envisioned by the late geologist Warren Nokleberg (1939-2021), who contributed much to the initial geologic map compilation
A nation's endowment of nonfuel mineral resources, relative to the world's endowment, is a fundamental consideration in decisions related to a nation's economic and environmental well being and security. Knowledge of the worldwide abundance, distribution, and general geologic setting of mineral commodities provides a framework within which a nation can make decisions about economic development of its own resources, and the economic and environmental consequences of those decisions, in a global perspective. The information in this report is part of a U.S. Geological Survey (USGS) endeavor to evaluate the global endowment of both identified and undiscovered nonfuel mineral resources. The results will delineate areas of the world that are geologically permissive for the occurrence of undiscovered selected nonfuel mineral resources together with estimates of the quantity and quality of the resources. The results will be published as a series of regional reports; this one provides basic data on the identified resources and geologic setting, together with a brief appraisal of the potential for undiscovered mineral resources in Africa and the Middle East. Additional information, such as production statistics, economic factors that affect the mineral industries of the region, and historical information, is available in U.S. Geological Survey publications such as the Minerals Yearbook and the annual Mineral Commodity Summaries (available at http://minerals.usgs.gov/minerals).
An estimation technique has been derived to predict the number of small fields in a geologic play or basin. Historically, many small oil and gas fields went unreported because they were not economical. This led to an underestimation of the number of undiscovered small fields. A study of the distributions of reported oil and gas fields in well-explored areas suggests that the large fields when grouped into log base 2 size classes are geometrically distributed. Further, the number of small fields reported is a function of the cost of exploration and development. Thus, the population field-size distribution is conjectured to be log geometric in form. ?? 1983 Plenum Publishing Corporation.
Geoheritage lies at the intersection of geology and society (NASEM 2021). It is a value-laden term applied to geologically significant features and landforms to highlight the scientific, educational, cultural, economic, and aesthetic values that society places on them (Brilha 2018, GSA 2017, NPS and AGI 2015). The U.S. Geological Survey (USGS) National Cooperative Geologic Mapping Program (NCGMP) proposed the development of a geoheritage geospatial product (GGP) to broaden the relevance of geologic mapping to stakeholders within the scientific community and the public (Shelton et al. 2022). To accomplish this, the USGS Geoheritage Sites of the Nation project was initiated to design the GGP and build a geoheritage site inventory to showcase geodiversity and natural heritage throughout the United States and its territories to accompany the seamless 2D and 3D geologic map and model being developed by the NCGMP and its partners (DeVera et al. 2022). The GGP serves as an educational and outreach tool to 1) raise awareness of significant geologic sites, 2) communicate the role of geology in our natural heritage, and 3) increase accessibility and relevance of geologic mapping and geoscience topics more broadly to the public (DeVera et al. 2023b).
The following report summarizes data acquired during 1942-45, in Colombia, by geologists and engineers of the Foreign Economic Administration, with whom the United States Geological Survey cooperated. Twenty-nine mineral commodities are considered, but the data for five of them are scant because they were of no interest to FEA personnel. Petroleum is not considered. Preliminary to a review of individual mineral commodities, resumes are given of the general geography and geology of Colombia and of the country's mining laws. The principal mineral commodities, besides petroleum, produced in Colombia are (1) emeralds, gold, platinum, and silver, mainly for export, and (2) barite, cement, clay, coal, gypsum, salt, sand and gravel, silica, and stone, mainly for the domestic market. A large number of other mineral commodities are known in "raw" prospects, some of which may eventually become productive. Their distribution and apparent potentialities, as of 1945, are given. Factors unfavorable to mining are the ruggedness of the terrain, the scarcity of outcrops, and the very high transportation costs.
Many scientists think that the supply of economically recoverable oil and natural gas is geologically limited. However, as recently as early 1999, we experienced a glut of oil on the world market and the lowest inflation-adjusted price of gasoline in history. What is going on? While we cannot provide a comprehensive answer to that question here, we can describe one process that significantly affects the domestic oil and gas industry, a process that also will affect the global industry at some point—reserve growth (also known as field growth).
We report on the chemical analysis of water samples collected from the Taylor Mountains 1:250,000 quadrangle. Samples were collected as part of the multi-year U.S. Geological Survey's project -- Geologic and Mineral Deposit Data for Alaskan Economic Development. Data presented here are from water samples collected primarily in the northeastern part of the Taylor Mountains quadrangle. The data include samples taken from the Taylor Mountains C1, C2, D1, D2, and D4 1:63,360 scale quadrangles. The data are being released at this time with minimal interpretation. Site selection was based on a regional sampling strategy that focused on first and second order drainages. Water sampling site selection was based on landscape parameters that included physiography, wetland extent, lithological changes, and the cursory field review of the mineralogy from the pan concentrates. Stream water in the Taylor Mountians quadrangle is dominated by bicarbonate (HCO3-), though in a few samples more than 50% of the anionic charge can be attibuted to sulfate ( SO42-). The major-cation chemistry range from Ca/Mg dominated to a mix of Ca/Mg/Na+K. Good agreement was found between the major cation and anions in the duplicate samples. Many trace elements were at or near the method detection limit in these samples but good agreement was found between duplicate samples for elements with detectable concentrations. Major ion concentrations were below detection in all field blanks and the trace elements concentrations generally were below detection. However, Ta (range 0.9 -.1 ug/L) and Zn (1 to 3.5 ug/L) were detected in all blanks and Ba ( 0.24 ug/L) and Th (0.2 ug/L) were detected in one blank. There was good agreement between dupilicate total- and methyl- mercury and DOC samples; however, total mercury, methyl-mercury and dissolve organic carbon (DOC) were detected in the blank at 2.35 ng/L, 0.07 ng/L and 0.57 mg/L, respectively.
We report on the chemical analysis of water samples collected from the Taylor Mountains 1:250,000-scale quadrangle. Parameters for which data are reported include pH, conductivity, water temperature, major cation and anion concentrations, trace-element concentrations, and dissolved organic-carbon concentrations. Samples were collected as part of a multiyear U.S. Geological Survey project "Geologic and Mineral Deposit Data for Alaskan Economic Development." Data presented here are from samples collected in June and July of 2005. The data are being released at this time with minimal interpretation. This is the second release of aqueous geochemical data from this project; 2004 aqueous geochemical data were published previously ( Wang and others, 2006 ). The data in this report augment but do not duplicate or supersede the previous data release. Site selection was based on a regional sampling strategy that focused on first- and second-order drainages. Water sample site selection was based on landscape parameters that included physiography, wetland extent, lithological changes, and a cursory field review of mineralogy from pan concentrates. Stream water in the Taylor Mountians quadrangle is dominated by bicarbonate (HCO 3- ), though in a few samples more than 50 percent of the anionic charge can be attributed to sulfate (SO 4 2- ). The major-cation chemistry ranges from Ca 2+ /Mg 2+ dominated to a mix of Ca 2+ /Mg 2+ /Na + +K + . In general, good agreement was found between the major cations and anions in the duplicate samples. Many trace elements in these samples were at or near the analytical method detection limit, but good agreement was found between duplicate samples for elements with detectable concentrations. With the exception of a total mercury concentration of 0.33 ng/L detected in a field blank, field blank major-ion and trace-elements concentrations were below detection.
We report on the chemical analysis of water samples collected from the Taylor Mountains 1:250,000-scale quadrangle, Alaska. Parameters for which data are reported include pH, conductivity, water temperature, major cation and anion concentrations, trace-element concentrations, and dissolved organic-carbon concentrations. Samples were collected as part of a multiyear U.S. Geological Survey project entitled ?Geologic and Mineral Deposit Data for Alaskan Economic Development.? Data presented here are from samples collected in June and July 2006. The data are being released at this time with minimal interpretation. This is the third release of aqueous geochemical data from this project; aqueous geochemical data from samples collected in 2004 and 2005 were published previously. The data in this report augment but do not duplicate or supersede the previous data release. Site selection was based on a regional sampling strategy that focused on first- and second-order drainages. Water sample site selection was based on landscape parameters that included physiography, wetland extent, lithological changes, and a cursory field review of mineralogy from pan concentrates. Stream water in the Taylor Mountains quadrangle is dominated by bicarbonate (HCO3-), although in a few samples more than 50 percent of the anionic charge can be attributed to sulfate (SO42-). The major-cation chemistry ranges from Ca2+/Mg2+ dominated to a mix of Ca2+/Mg2+/Na++K+. Generally, good agreement was found between the major cations and anions in the duplicate samples. Many trace elements in these samples were at or near the analytical method detection limit, but good agreement was found between duplicate samples for elements with detectable concentrations. All field blank major-ion and trace-element concentrations were below detection.
We report on the chemical analysis of water samples collected from the Taylor Mountains 1:250,000- and Dillingham D-4 1:63,360-scale quadrangles, Alaska. Reported parameters include pH, conductivity, water temperature, major cation and anion concentrations, and trace-element concentrations. We collected the samples as part of a multiyear U.S. Geological Survey project entitled "Geologic and Mineral Deposit Data for Alaskan Economic Development." Data presented here are from samples collected in June and August 2008. Minimal interpretation accompanies this data release. This is the fourth release of aqueous geochemical data from this project; data from samples collected in 2004, 2005, and 2006 were published previously. The data in this report augment but do not duplicate or supersede the previous data releases. Site selection was based on a regional sampling strategy that focused on first- and second-order drainages. Water sample sites were selected on the basis of landscape parameters that included physiography, wetland extent, lithological changes, and a cursory field review of mineralogy from pan concentrates. Stream water in the study area is dominated by bicarbonate (HCO 3 - ), although in a few samples more than 50 percent of the anionic charge can be attributed to sulfate (SO 4 2- ). The major-cation chemistry of these samples ranges from Ca 2+ -Mg 2+ dominated to a mix of Ca 2+ -Mg 2+ -Na + +K 2+ . In most cases, analysis of duplicate samples showed good agreement for the major cation and major anions with the exception of the duplicate samples at site 08TA565. At site 08TA565, Ca, Mg, Cl, and CaCO 3 exceeded 25 percent and the concentrations of trace elements As, Fe and Mn also exceeded 25 percent in this duplicate pair. Chloride concentration varied by more than 25 percent in 5 of the 11 duplicated samples. Trace-element concentrations in these samples generally were at or near the detection limit for the method used and, except for Co at site 08TA565, generally good agreement was determined between duplicate samples for elements with detectable concentrations. Major-ion concentrations were below detection limits in all field blanks, and the trace-element concentrations also were generally below detection limits; however, Co, Mn, Na, Zn, Cl, and Hg were detected in one or more field blank samples.
The water needs of the Mojave River basin will increase because of population and industrial growth. The Mojave Water Agency is responsible for providing sufficient water of good quality for the full economic development of the area. The U.S. Geological Survey suggested an electric analog model of the basin as a predictive tool to aid management. About 1,375 square miles of the alluvial basin was simulated by a passive resistor-capacitor network. The Mojave River, the main source of recharge, was simulated by subdividing the river into 13 reaches, depending on intermittent or perennial flow and on phreatophytes. The water loss to the aquifer was based on records at five gaging stations. The aquifer system depends on river recharge to maintain the water table as most of the ground-water pumping and development is adjacent to the river. The accuracy and reliability of the model was assessed by comparing the water-level changes computed by the model for the period 1930-63 with the changes determined from field data for the same period. The model was used to predict the effects on the physical system by determining basin-wide water-level changes from 1930-2000 under different pumping rates and extremes in flow of the Mojave River. Future pumping was based on the 1960-63 rate, on an increase of 20 percent from this rate, and on population projections to 2000 in the Barstow area. For future predictions, the Mojave River was modeled as average flow based on 1931-65 records and also as high flow, 1937-46, and low flow, 1947-65. Other model runs included water-level change 1930-63 assuming aquifer depletion only and no recharge, effects of a well field pumping 10,000 acre-feet in 4 months north of Victorville and southeast of Yermo, and effects of importing 10,000, 35,000, and 50,800 acre-feet of water per year from the California Water Project into the Mojave River for conveyance downstream.
The fragile coral reefs of the Florida Keys form the largest living coral reef ecosystem in the continental United States. Lining the shallow outer shelf approximately 5 to 7 km seaward of the keys, the reefs have national aesthetic and resource value. As recently as the 1970s, the coral reefs were the heart of a vibrant ecosystem. Since then, the health of all ecosystem components has declined markedly due to a variety of environmental stressors . Corals are succumbing to bleaching and diseases. Species that are the building blocks of solid reef framework are increasingly being replaced by species that do not construct reef framework. Algal proliferation is increasing competition for space and hard surfaces needed by coral larvae for settlement. Decline of the coral reef ecosystem has significant negative implications for economic vitality of the region, ranging from viability of the tourism industry attracted by the aesthetics to commercial fisheries drawn by the resources. At risk of loss are biologic habitats and reef resources, including interconnected habitats for endangered species in shoreline mangroves, productive nearshore marine and wetland nurseries, and economic offshore fisheries. In 1997, the U.S. Geological Survey's Coastal and Marine Geology Program undertook a comprehensive 7-year-long mission to consolidate, synthesize, and map new (1997) and existing geologic and biologic information into a digitized regional database and one-volume reference source on the geologic history of the Florida Keys reef tract (this report). The project was conducted in cooperation with the National Oceanic and Atmospheric Administration's National Marine Sanctuary Program. The purpose was to examine the natural evolution and demise of several coral reef ecosystems over the past 325,000 years, with an eye toward gaining a better understanding of the cause of the reef decline observed today. Scientific data and datasets presented in this report are intended for use by others in ongoing efforts to delineate which components of reef decline in the Florida Keys may be natural and which may be a result of human activities. Beyond scientific baseline datasets, this report also incorporates environmental, social, and historical aspects of the Florida Keys, including the impact of exploratory oil wells on benthic habitats off Florida.
The objective of this report by the U.S. Geological Survey is to identify cultural and economic determinants of water demand, supply, and access, and to locate associated datasets of those determinants. Although climate and its influence on hydrology are important components of water availability, this study focused only on the components of the human system. The Delaware River Basin (the area including Delaware Bay, and parts of four States including Delaware, New Jersey, New York, and Pennsylvania) was used as a proxy. The basin covers approximately 13,600 square miles, supplies agricultural, municipal, and industrial water, and provides jobs for millions of people in the region. The most salient social and economic determinants affecting current water availability, as well as existing data sources on those determinants, were identified through a literature review. Regional water availability results from complex interactions of water supply and demand, as well as hydrological and climatological interactions between institutions and economics. Following the definition of water availability from Herman-Mercer and others (2023), “access to a specific quantity and quality of water at a point in time and space, for a specific use, recognizing the social and economic value of water across uses and institutions that facilitate or hinder its impartial and efficient provisioning,” we identify human determinants influencing water supply and demand and provide examples from the extensive datasets available to estimate these determinants in the agricultural, municipal, and industrial water-use sectors, using the Delaware River Basin as a case study. We also reference determinants related to recreation and ecosystem services that influence water availability in the Delaware River Basin. Gaps were found pertaining to best practices for prioritization of human determinants within water-availability assessments and a lack of consistent data collection across different scales. A major focus of the work identified a need to prioritize collection and refinement of the human determinants to improve water availability estimation and forecasting. We ascertained that predictions of water use in these sectors often fall short. Predictions may use approximations for changes in demand, such as population or economic activity. Changes in demand also may be influenced by political or other strategic behavior, which are more difficult to incorporate into predictions. Approximations and other assumptions about water supply and demand can be improved to better predict water availability. Therefore, there is an opportunity to further understand and use the fundamental human determinants of water supply and demand along with changing climate variables to predict water availability in the future.
Ground‐penetrating radar (GPR) and continuous seismic‐reflection profiling (CSP) on shallow rivers, lakes, and ponds are efficient and economical ways of obtaining subsurface hydrologic and geologic information for environmental and engineering studies. These methods are similar in that they produce continuous subsurface profiles, are easy to use in some applications, and the records can occasionally be straightforward to interpret. They are dissimilar in that GPR cannot penetrate electrically conductive water or subsurface sediments, and CSP usually cannot operate in water less than 5 feet (ft.) deep. GPR records collected on a lake in New Hampshire have been interpreted to estimate the depth to bedrock and to evaluate the grain‐size characteristics of the underlying stratified drift at the lakeshore boundary. In a pond in Massachusetts, CSP and GPR were used to determine depth to bedrock and the grain‐size characteristics of the subbottom materials in part of the pond. Water‐column multiple reflections, depth and conductivity of water and subsurface materials, and diffractions degraded the quality of the GPR records. CSP records collected in the Connecticut River near Hartford, Connecticut were used to estimate the depth of till and bedrock interfaces and to evaluate grain‐size characteristics of subsurface materials. Interpreted CSP records also can indicate bedding planes within consolidated rock units. Water‐column multiple reflections and very shallow water degraded the quality of the CSP records. GPR and CSP methods have been used to delineate infilled scour holes near bridge piers. Scour holes that were filled with up to 8 ft. of loose sand were mapped during engineering scour studies near a bridge in Connecticut. Because GPR and CSP operate on different physical principles, the two geophysical methods complement each other. Depending on the required depth of penetration and the degree of resolution needed, one or both of these methods can be used to acquire accurate and reliable subsurface hydrologic and geologic information critical to environmental and engineering studies.
Currently, only 24 percent of Colorado's spectacular geology has been mapped at the fine scale of 1:24,000. At the same time, the state hosts many geologic hazards. Most maps of Colorado are at much broader scales, failing to show detail of basic geology crucial to safe engineering and building practices in a state that had the third-fastest-growing population during the 1990s. And the 2000 Census showed that the state, despite some economic woes, remains one of the fastest growing. Detailed geologic maps also aid the mineral industries that help fuel such growth. Since 1992, the Colorado Geological Survey (CGS) has mapped 1:24,000-scale quadrangles in high-impact areas under the STATEMAP component of the National Cooperative Geologic Mapping Program. In 2002, CGS completed its 43rd geologic quadrangle map. The long-range plan for the state is to complete 116 high-priority quadrangles in the next 15 years. The survey's approach is to select rapidly growing areas with relatively high potential for hazards and map contiguous quadrangles. In addition to mapping bedrock, CGS geologists have mapped the Quaternary deposits at the surface. Understanding these deposits is extremely important for implementing sound engineering practices because of potential for subsidence and landslides. The CGS mapping has not only yielded information about potential hazards, but also advanced scientific understanding of the state.