USGS Science⌕ Search

SEARCH · USGS Science

Results for “Annual Review of Environment and Resources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 66Linked to original sources
USGS2024

Bedrock geologic map of the Woodstock quadrangle, Grafton County, New Hampshire

The bedrock geology of the Woodstock 7.5-minute quadrangle consists of highly deformed metasedimentary rocks of the Central Maine trough, including the Silurian Rangeley and Perry Mountain Formations and the Devonian Littleton Formation. The central, northern, and eastern parts of the quadrangle are underlain by the oldest rocks in the area, the Rangeley Formation. In the southwest and south-central part of the quadrangle, metaturbidites of the Perry Mountain Formation and subsequent Littleton Formation overly the Rangeley Formation in a deformed F 1 synform, herein informally called the Bagley Brook basin. The metasedimentary rocks were intruded by widespread syn- to post-tectonic granitoids of the Devonian New Hampshire Plutonic Suite and minor post-metamorphic Jurassic-Cretaceous mafic dikes of the White Mountain Plutonic-Volcanic Suite. The metasedimentary rocks were affected by at least two episodes of deformation in the Devonian Acadian orogeny. The dominant regional foliation is second-generation (S 2 /D 2 ) and formed during the development of sillimanite-muscovite mineral assemblages. Large bodies of the Early Devonian Kinsman Granodiorite intruded the metasedimentary rocks semi-concordantly during D 2 deformation. Dikes of the Late Devonian Concord Granite cut the Kinsman Granodiorite and the metasedimentary rocks and were emplaced either syn- or post-D 2 . The map pattern in the Rangeley Formation is dominated by northeast to northwest trending, moderately to steeply north-dipping F 2 and F 3 folds. Map-scale F 1 folds are defined by the Bagley Brook basin. Previous division of Rangeley Formation stratigraphy in this region into “upper” and “lower” parts was not corroborated by 1:24,000-scale mapping of lithodemic units, and rocks previously mapped as part of the Smalls Falls and Madrid Formations are here reassigned to the Rangeley Formation. Some rocks previously mapped as the lower part of the Littleton Formation are now assigned to the Perry Mountain Formation. The Littleton Formation on this map is approximately equivalent to rocks previously mapped as the upper part of the same formation. Steeply dipping fractures in the quadrangle show a preferred northeast orientation, consistent with subsurface fracture orientations in the well fields near Mirror Lake. Jurassic-Cretaceous mafic dikes and normal faults show preferred northeast orientations, similar to the fractures, suggesting that the extensional stress field that controlled dike orientation during the Mesozoic also produced the dominant brittle fabrics in the area.

New Hampshire↗
USGS2024

A comparative analysis of OpenET for evaluating evapotranspiration in California almond orchards

The almond industry in California faces water management challenges that are being exacerbated by droughts, climate change, and groundwater sustainability legislation. The Tree-crop Remote sensing of Evapotranspiration eXperiment (T-REX) aims to explore opportunities to improve precision irrigation management for woody perennial cropping systems. Almond orchards in the California Central Valley were equipped with eddy covariance flux measurements to evaluate satellite remote sensing-based evapotranspiration (RSET) models. OpenET provides high-resolution (30-m spatial and daily temporal) RSET data, synthesizing decades of research for practical water management. This study provides an evaluation of OpenET performance at six almond sites covering a large range in soils, age, and variety. It also compares OpenET ensemble evapotranspiration (ET) data with applied irrigation and precipitation records over an additional 148 almond orchards located in the Central Valley of California. Results show OpenET models, including the ensemble ET value, produced reasonable and actionable ET values, with overall coefficient of determination (R 2 ) and mean absolute error values of 0.73- and 0.95-mm d −1 at the daily time step, respectively. However, given the temporal sampling of Landsat (8-day revisit) and the interpolation methods used, the assessed ET models had difficulty in capturing short-term variability in almond ET; for example, the rapid decline in measured ET observed as a response to lack of irrigation preceding and during almond harvest. The study also drew attention to the spatial complexity in scenarios where irrigated orchards are surrounded by hot/dry areas, causing discrepancies between measured and modeled ET values. In comparison with irrigation records, OpenET ensemble ET was capable of quantifying water input (applied irrigation + precipitation) in almond orchards to within 13 % when evaluating monthly data. Initial results presented here reinforce the idea that RSET models, such as in OpenET, are powerful tools, yet their application requires nuanced understanding and careful consideration of local conditions.

California↗
USGS2025

Metal fingerprints of Eocene rhyolite magmas coincident with Carlin-type gold deposition in Nevada USA

Eocene magmatic systems contemporaneous with world-class Carlin-type Au deposits in Nevada (USA) have been proposed by some researchers as a key ingredient for Au mineralization, though evidence conclusively demonstrating their genetic relationship remains tenuous. This study provides the first direct evidence of the pre-eruptive metal budget of volatile- and metal-charged silicic magmas coincident in time (~41 to 34 Ma) and space (within 5 km) with Carlin-type Au deposits. We characterize the pre-eruptive metal fingerprints of these diverse magmatic systems to assess their potential as sources of metals for Carlin-type Au mineralization. Metal abundances from quartz-hosted melt inclusions (Au, Te, Ag, Sb, Tl, Mo, W, Sn, As, Pb, Co, Cu, Ni, and Zn) characterized in situ by SHRIMP-RG and LA-ICP-MS represent our best (and only) estimates for the pre-eruptive metal budget in these systems. Median metal concentrations are generally within one order of magnitude of average upper crust and average continental rhyolite values. But there are two notable exceptions, with median Au contents extending >1 order of magnitude higher than average upper crust and median Cu contents ranging >1 order of magnitude lower than upper crust. Despite this, melts contain lower Au/Cu (<0.1), Au/Ag (<5), and Au/Tl (<0.3) than most ore-grade Carlin-type rock samples and quartz-hosted fluid inclusions, regardless of their age and timing relative to nearby Carlin-type Au mineralization. The metal fingerprints of these magmatic systems, de-fined both by traditional and multivariate compositional data analysis techniques, are distinct from one another. Yet none are particularly specialized, e.g., high Au/Cu, in terms of being ideal ingredients as postulated by magmatic models for Carlin-type Au mineralization. Magmatic Au contents do not appear to be correlated with rhyolite “flavors” in the way that Cu, Sn, and Nb contents are. Fluid/melt partitioning modeling and magma volume estimates support the idea that a diverse array of non-specialized silicic magmas could feasibly contribute some or potentially all of the Au, Ag, and Cu in Carlin-type systems. The compositional diversity among contemporaneous magmatic systems could possibly contribute to some of the diversity observed across Carlin-type Au districts in Nevada.

Nevada↗
USGS2024

Classification of lakebed geologic substrate in autonomously collected benthic imagery using machine learning

Mapping benthic habitats with bathymetric, acoustic, and spectral data requires georeferenced ground-truth information about habitat types and characteristics. New technologies like autonomous underwater vehicles (AUVs) collect tens of thousands of images per mission making image-based ground truthing particularly attractive. Two types of machine learning (ML) models, random forest (RF) and deep neural network (DNN), were tested to determine whether ML models could serve as an accurate substitute for manual classification of AUV images for substrate type interpretation. RF models were trained to predict substrate class as a function of texture, edge, and intensity metrics (i.e., features) calculated for each image. Models were tested using a manually classified image dataset with 9-, 6-, and 2-class schemes based on the Coastal and Marine Ecological Classification Standard (CMECS). Results suggest that both RF and DNN models achieve comparable accuracies, with the 9-class models being least accurate (~73–78%) and the 2-class models being the most accurate (~95–96%). However, the DNN models were more efficient to train and apply because they did not require feature estimation before training or classification. Integrating ML models into benthic habitat mapping process can improve our ability to efficiently and accurately ground-truth large areas of benthic habitat using AUV or similar images.

Michigan, Wisconsin↗
USGS2026

A case study of maximum depositional ages from terrestrial sandstones near the Cretaceous—Paleogene transition, western Williston Basin, USA

We present a new Bayesian method for deriving maximum depositional ages from detrital K-feldspar using total-fusion 40 Ar/ 39 Ar data. Individual analyses weighted by K/Ca ratio, age uncertainty, and percent radiogenic argon prioritize a result to come from accurately measured volcanic sources. Results from this method applied to sandstones from the Hell Creek region of northeastern Montana show that detrital K-feldspar maximum depositional ages align closely with detrital U-Pb zircon ages as well as tephra based chronostratigraphic constraints from both 40 Ar/ 39 Ar and U-Pb data. An age model informed by maximum depositional ages and available tephra data provides an estimate of 1.74 ± 1.04 Ma for the duration of deposition for the Hell Creek Formation. Combined age model and maximum depositional age data suggest ≤ 1.84 Ma of missing time is represented by the Hell Creek and Fox Hills formational disconformity, coinciding with the final regression of the Western Interior seaway.

Montana↗
USGS2025

Factors influencing landslide occurrence in low-relief formerly glaciated landscapes: Landslide inventory and susceptibility analysis in Minnesota, USA

In landscapes recently impacted by continental glaciation, landslides may occur where topographic relief has been generated by the drainage of glacial lakes and ensuing post-glacial fluvial network development into unconsolidated glacially derived sediments and exhumed bedrock. To investigate linkages among environmental variables, post-glacial landscape development, and landslides, we created a landslide inventory of nearly 10,000 landslides in five regions of the formerly glaciated low-relief state of Minnesota, USA. Multivariate logistic regression indicates the importance of slope angle, lithology, and the development of stream valleys to landslide distribution. Areas underlain by fine-grained glaciolacustrine and nearshore deposits that are incised by streams are particularly prone to shallow (<1-2 m depth) landslides. Landslides also occur in a wide range of glacial and fluvial deposits, and as rockfall in layered Paleozoic sedimentary rocks in central and southern Minnesota and Precambrian igneous and sedimentary rocks in northeastern Minnesota. Although no more than 1-2% of the studied regions are susceptible to landslides, they can pose risk to life and safety, damage infrastructure, and impact water quality. The combination of recently generated low-relief steep slopes, extensive unconsolidated sediments, and layered sedimentary bedrock make this formerly glaciated landscape more susceptible to landslides than current national-scale models indicate.

Minnesota↗
USGS2025

Approximate inland extent of saltwater intrusion at the base of the Biscayne aquifer, Miami-Dade County, Florida, 2022

Miami-Dade County is part of a densely populated urban corridor in southeastern Florida. The Biscayne aquifer serves as Miami-Dade County’s primary drinking water source and is characterized by highly permeable karstic limestone and carbonate sand. The aquifer’s coastal location and permeable nature make it susceptible to saltwater intrusion. Monitoring the current inland extent and the rate of movement of the saltwater front in the aquifer can inform management strategies for conserving the long-term sustainability of the county’s water supply. In the 1950s, the U.S. Geological Survey published a map of the inland extent of saltwater intrusion in the Biscayne aquifer and has continued to update this map to monitor changes over time, with the most recent update published in 2018. An updated map has been created showing the approximate inland extent of saltwater intrusion in the Biscayne aquifer in eastern Miami-Dade County in 2022, with the 2018 extent shown for comparison. The inland extent of saltwater intrusion was mapped through the interpretation of borehole electromagnetic induction logs and measurements of chloride and specific conductance in groundwater samples. The location of the saltwater interface at the base of the Biscayne aquifer was represented by the 1,000-milligram-per-liter isochlor. This report describes changes in the location of the saltwater interface from 2018 to 2022. By 2022, the saltwater interface had moved farther inland in both the northern and southern parts of the county, advancing by as much as 0.3 kilometer in the north and up to 0.8 kilometer in the Model Land Area to the south. However, it remained relatively unchanged from its 2018 position in the east-central part of the county.

Florida↗
USGS2025

The 3D National Topography Model Call for Action—Part 2: The Next Generation 3D Elevation Program

The three-dimensional (3D) National Topography Model initiative to integrate elevation and hydrography data includes the next generation of hydrography data from the 3D Hydrography Program and the next generation of elevation data from the 3D Elevation Program (3DEP). The first-ever collection of light detection and ranging (lidar) data for the nation (IfSAR for Alaska) provides a critical baseline reference, and the addition of multiple repeat elevation mapping projects as part of the next generation of 3DEP would substantially expand analysis capabilities. As the U.S. Geological Survey (USGS) is closing in on our goal of complete coverage with 3DEP data available or in progress for 98.3 percent of the Nation at the end of fiscal year 2024, the USGS is already transitioning to the next generation of 3DEP. Based on the 3D Nation Study results and input from a broad range of stakeholders, the USGS National Geospatial Program has finalized a new design for 3DEP that provides increased lidar quality levels and refresh rates. The new program is designed with more flexibility to meet changing user needs and take advantage of improvements in mapping technologies. The program will aim to expand the level of interagency coordination for topobathymetric lidar acquisition for inland rivers. The next generation of 3DEP will also aim to emphasize research, including advancing program design, products, and services and engaging and leveraging the evolving 3D industry. Research goals also include becoming more flexible in meeting user needs and taking advantage of evolving remote-sensing technologies. The program also plans to move from focusing on producing standard products to producing a concept of a 3D Nation Ecosystem with a variety of inputs, products, and services.

Circular↗
USGS2026

Core microbiomes as a potential fingerprinting method of Western USA dust sources

Introduction: Changing frequency and intensity of dust emissions impacts ecosystems and human health. Dust carries microbes, nutrients, heavy metals, and other materials that may change environmental biogeochemistry at deposition sites. Identifying dust sources provides key information on where and when mitigation strategies should be employed. However, commonly used geochemical or isotopic tracers are often not capable of distinguishing between geographic regions. Methods: We explored whether soil bacterial communities may provide distinct fingerprints of dust sources in the western United States. We identified bacterial core communities of dust from ten locations monitored by the National Wind Erosion Research Network (NWERN) with varied land use (cropland, rangeland, and playa), and compared communities to location, soil, and regional characteristics. Samples were collected monthly from Modified Wilson and Cooke (MWAC) samplers, composited by season (spring, summer, and fall), and analyzed using 16S rRNA sequencing. Results: We found distinct bacterial core communities that reflected dust source characteristics. In order of importance, precipitation levels ( p = 0.0001), location ( p = 0.0001), soil texture ( p = 0.0001), seasonality ( p = 0.0001), and elevation (p = 0.0002) were correlated with bacterial community composition. Discussion: Distinct bacterial core communities were associated with site characteristics such as biocrusts, playas, and military base proximity. Our results suggest that the use of core microbiomes may offer a fingerprinting method to identify dust source regions.

Colorado, Nevada, New Mexico, North Dakota, Oklaho↗
USGS2025

Central Valley Hydrologic Model version 2 (CVHM2): Decision support tool for groundwater and land subsidence management

The San Joaquin Valley (SJV) of California is one of the world’s most productive agricultural regions. Reliance on groundwater has led to some of the greatest rates of human-induced land subsidence in the world in the 20th century, as well as more recently. The United States Geological Survey (USGS) has recently developed an integrated surface–subsurface hydrologic model, the Central Valley Hydrologic Model 2 (CVHM2), that represents the major components of the hydrologic system of California’s Central Valley. In this study, CVHM2 was applied as a decision support tool while simulating various management strategies to mitigate the land subsidence caused by the extraction of groundwater. CVHM2 was extended through to 2073 and applied to simulate management scenarios in terms of three primary drivers and their impact on subsidence along the Delta–Mendota Canal (DMC), a critical piece of infrastructure in the western SJV. The drivers considered were agricultural water demands, managed aquifer recharge (MAR), and changes in future climate. The results show that future subsidence is most sensitive to water demands, second most sensitive to future changes in climate, and relatively insensitive to MAR when it is applied as a surface application in the western SJV. However, we demonstrate via proof-of-concept scenarios that the MAR is capable of arresting subsidence when implemented via injection below the Corcoran Clay Member of the Tulare Formation instead of as a surface application. We also examine the uncertainty that is the result of climate variability and how to use the tool to identify the most appropriate strategies to constrain future subsidence to acceptable levels.

California↗
USGS2025

The 1912 Ms 7.2 earthquake in the Denali region of central Alaska

The 2002 M w 7.9 earthquake in central Alaska ruptured 340 km on three faults—Susitna Glacier thrust fault, Denali fault, Totschunda fault—crossing both the Richardson Highway and the Alaska Pipeline. Its occurrence prompted renewed interest in historical large earthquakes that possibly originated on the Denali fault. One of these earthquakes was a M s 7.2 event on July 7, 1912, which we revisit with two approaches: (1) probabilistic relocation of the epicenter using globally recorded arrival times, and (2) compilation and reassessment of shaking intensity reports to estimate a macroseismic epicenter. Our preferred instrumental epicenter is west of the Parks Highway and in agreement with the maximum‐reported shaking, which was from the Parker–Browne expedition of Denali. We also relocated a M s 6.4 aftershock, whose epicenter is 11 km from the mainshock. Candidate faults for the 1912 earthquake include the Denali fault, the McLeod Creek thrust fault, and the Kantishna Hills thrust fault. Future analysis of active faults, paleoseismic results, 1912 instrumental data, and 1912 felt reports may help in interpreting the fault and mechanism of the 1912 earthquake.

Alaska↗
USGS2023

Explosive trachyte eruptions from the Al Efairia volcanic center in northern Harrat Rahat, Kingdom of Saudi Arabia

Harrat Rahat is an alkali basalt, continental, intraplate volcanic field located within the central-western part of the Kingdom of Saudi Arabia. The northern quarter of Harrat Rahat contains evolved volcanic products that achieve trachyte compositions (>60 weight percent SiO 2 ). Within the Al Efairia volcanic center, pyroclastic-flow and -surge deposits that reflect explosive trachyte volcanism (and minor exposed lava domes that reflect effusive trachyte eruptions) sit at the surface as the youngest expression of volcanic activity within this part of the Harrat Rahat volcanic field. Five trachyte deposits emplaced explosively have been identified within the Al Efairia volcanic center based on geologic mapping, petrography, geochemistry, and paleomagnetism. These units are the trachytes of Um Rgaibah, Gura 5, Gura 4, Al Efairia, and Al Qayf, in descending stratigraphic order. Here, we present 14 40 Ar/ 39 Ar analyses from four of these units, which yield eruption ages of 4.2±5.2 thousand years (ka) for the trachyte of Um Rgaibah, 79.7±1.6 ka for the trachyte of Gura 5, 84.3±1.6 ka for the trachyte of Gura 4, and 88.0±1.8 ka for the trachyte of Al Efairia. The eruption age of the trachyte of Al Qayf has been constrained to between 410.3±3.4 and 418.8±1.9 ka using paleomagnetic correlations and 40 Ar/ 39 Ar ages from overlying and underlying intermediate composition lava flows. Most of these trachytes have distinct geochemical compositions, petrographic characteristics, and directions of remanent magnetization. The exceptions are for the trachytes of Gura 4 and Gura 5, which overlap in their geochemical, petrographic, paleomagnetic, and geochronologic affinities. Based on these similarities, we interpret the trachytes of Gura 4 and Gura 5 to have erupted during a closely spaced (a few decades) time interval from the same magma batch but from craters that are >2 kilometers (km) apart. The eruption of the trachyte of Al Efairia at 88.0±1.8 ka is the result of a different magma batch that erupted a few thousand years prior to the trachytes of Gura 4 and Gura 5. The Al Efairia volcanic center is remarkably different from the Matan volcanic center located ~10 km to the north, which has also erupted young (<150 ka) trachytes. The Matan volcanic center has been shown to produce trachyte compositions only after eruption of basalt followed by intermediate lava flows, whereas only trachyte compositions have erupted within the Al Efairia volcanic center over this same time interval.

Al Efairia volcanic center, Harrat Rahat↗
USGS1977

Leachate plumes in ground water from Babylon and Islip landfills, Long Island, New York

Landfills operated by the Towns of Babylon and Islip in southwest and central Suffolk County contain urban refuse, incinerated garbage, and scavenger (cesspool) waste; some industrial refuse is deposited at the Babylon site. The Islip landfill was started in 1933, the Babylon landfill in 1947. The landfills are in contact with and discharge leachate into the highly permeable upper glacial aquifer (hydraulic conducitvity 190 to 500 ft/d [feet per day]). The aquifer is 74 feet thick at the Babylon landfill and 170 feet thick at the Islip landfill. The leachate-enriched water occupies the entire thickness of the aquifer beneath both landfills, but hydrologic boundaries retard downward migration of the plumes to deeper aquifers. The Babylon plume is 1,900 feet wide at the landfill and narrows to about 700 feet near its terminus 10,000 feet from the landfill. The Islip plume is 1,400 feet wide at the landfill and narrows to 500 feet near its terminus 5,000 feet from the landfill. Hydrochemical maps and sections show the distribution of the major chemical constituents of the plumes. The most highly leachate-enriched ground water obtained was from the Babylon site; it contained 860 mg/L (milligrams per liter) sodium, 110 mg/L potassium, 565 mg/L calcium, 100 mg/L magnesium, 2,700 mg/L bicarbonate, and 1,300 mg/L chloride. Sulfate was notably absent or in low concentration in most parts of both plumes. Nitrogen in plume water was mostly in the form NH4+, and concentrations as high as 90 mg/L were found; concentrations of nitrogen as N in the plume were less than 10 mg/L. As much as 440 mg/L iron and 190 mg/L manganese were found in the leachate-enriched water. Samples were also tested for arsenic, boron, cadmium, cobalt, chromium, copper, mercury, nickel, lead, selenium, strontium, and zinc. Boron was more or less ubiquitous and was found in concentrations as high as 2 mg/L. Organic carbon was found in concentrations as high as 2,250 mg/L in the most highly leachate-enriched water but attenuated rapidly to less than 20 mg/L. Dissolved-solids concentrations near the landfills were between 400 and 3,000 mg/L at Babylon and between 500 and 1,500 mg/L at Islip. Ground-water temperatures near the landfills exceed those in ambient water by as much as 7°C at Babylon and 16°C at Islip. Heat contributed by the landfills was mostly dissipated within 0.4 mi of the landfill, butat Islip, the warm leachate-enriched water extended 0.5 mi downgradient. The entrance of leachate into the less dense ground water as pulsations after rainfall may explain the presence of high leachate enrichment near the bottom of the aquifer. A comparison of the physical characteristics of leachate-enriched ground water with those of ambient water suggests that the downward movement of leachate results from its greater density. Simulation of the movement and dispersion of the Babylon plume with a mathematical dispersion model indicated the coefficient of longitudinal dispersion to be about 60 ft 2 /d (feet squared per day) and the ground-water velocity to be 1 ft/d. However, the velocity determined from the hydraulic gradient and public-supply wells in the area was 4 ft/d, which would cause a plume four times as long as that predicted by the mathmatical dispersion model. At the Islip site, the plume was one-third the length calculated on the basis of the age of the landfill. The shortness of the plumes has not been explained; it may be a result of the leachate's having been too dilute to form a plume during the early years of the landfills.

New York↗
USGS2024

Wave propagation in layered soil deposits

Recent advances in the general theory of viscoelastic waves and rays in layered media provide a rigorous mathematical framework for site-specific, soil-response models used for earthquake resistant design. The advances provide general closed-form anelastic solutions for the classic problems of the response of a stack of soil layers to S and P waves, ray theory for reflected and refracted waves, Rayleigh- and Love-Type surface waves, and head waves. These general solutions valid for anelastic media regardless of the amount of material damping yield new insights regarding the characteristics of seismic waves and their ray paths that are not provided by conventional models. They provide corresponding numerical ground-response models and ray-tracing computation algorithms that account for changes in velocity and attenuation of anelastic waves associated with changes in inhomogeneity of the waves induced by anelastic soil and soil-rock boundaries. These anelastic effects manifest themselves as variations in amplitude response, amplitude attenuation, raypath location, and travel time as observed at the Earth’s surface. Implications of these anelastic effects for soil-response models used for earthquake resistant design are provided herein.

Conference Paper↗
USGS2025

Relationship of atmospheric nitrogen deposition to soil nitrogen cycling along an elevation gradient in the Colorado Front Range

Microbial processing of atmospheric nitrogen (N) deposition regulates the retention and mobilization of N in soils, with important implications for water quality. Understanding the links between N deposition, microbial communities, N transformations, and water quality is critical as N deposition shifts toward reduced N and remains persistently high in many regions. Here, we investigated these connections along an elevation transect in the Colorado Front Range. Although rates of N deposition and pools of extractable N increased down the elevation transect, soil microbial communities and N transformation rates did not follow clear elevational patterns. The subalpine microbial community was distinct, corresponding to a high C:N ratio and low pH, while the microbial communities at the lower elevation sites were all very similar. Net nitrification, mineralization, and nitrification potential rates were highest at the Plains (1,700 m) and Montane (2,527 m) sites, suggesting that these ecosystems mobilize N. In contrast, the net immobilization of N observed at the Foothills (1,978 m) and Subalpine (3,015 m) sites suggests that these ecosystems retain N deposition. The contrast in N transformation rates between the plains and foothills, both of which receive elevated N deposition, may be due to spatial heterogeneity not captured in this study and warrants further investigation. Stream N concentrations from the subalpine to the foothills were consistently low, indicating that these soils are currently able to process and retain N deposition, but this may be disrupted if drought, wildfire, or land-use change alter the ability of the soils to retain N.

Colorado↗
USGS2025

Relationship between peak and cumulative ground motions from 49 Mw 3-6 earthquakes in the San Francisco Bay Area

We examine the relationship between peak ground velocity (PGV) and cumulative absolute displacement (CAD) for 49 M w 3 – 6 earthquakes in the San Francisco Bay Area (SFBA) and gain insight into the spatiotemporal partitioning of seismic energy in ground motion records with respect to source, path, and site effects. PGV and CAD are positively correlated, but there can be large deviations from the average trend. For example, ground motion records with either very long duration resonance or short pulse-like motions will have higher or lower CAD, respectively, but could have very similar PGV. We perform principal component analysis (PCA) on PGV-CAD for >7000 records in the SFBA with the goal of investigating what influences positive or negative anomalies in cumulative motions. PCA rotates the PGV-CAD datapoints into two principal components, where the one with the larger variance, which we call the “primary intensity” represents mostly the distance-dependence of ground motion amplitudes. The other principal component, which we call the “excess motion”, represents the deviation from cumulative motions that would be typical for a ground motion record with a given PGV. The excess motion will be positive in the case of records with long duration ringing and will be negative for short duration pulse-like ground motions. We find that excess motion is generally positive at sites in sedimentary basins and in soft sediments around the SF Bay. Excess motion is generally negative in the very near field, as well as at sites on hard bedrock. We discuss the findings here in terms of implications for seismic hazard applications and other wave propagation phenomena.

California↗
USGS2025

Evaluating Laramide orogenesis via flexural basin response in the San Juan basin, New Mexico and Colorado

A challenge in interpreting the location, timing, and magnitude of ancient orogenic events is that ongoing uplift and erosion in the hinterlands often destroys much of the primary record of these events. However, basin-thickness patterns in the sedimentary record can provide complimentary evidence of uplift via flexural effects. Here, we deploy well-log correlation, isochores, basin modeling, flexural modeling, and subcrop mapping to evaluate the Late Cretaceous to Paleogene basin response to Laramide tectonism in the San Juan basin. A wedge of upper Campanian to Maastrichtian sedimentary rock thickens from 200 to 800 meters from southeast to northwest in the basin. This pattern can be successfully simulated via flexural modeling if we infer early Laramide uplift along the northwest basin flank that produced a 0.8 km high topographic load. The Laramide unconformity bounds the top of this Upper Cretaceous sedimentary wedge and truncates progressively older strata to the east, further supporting a westward tilt of the basin. The onset of Campanian Laramide flexure may have also contributed to the profound transgression from the upper Menefee Formation to the Lewis Shale. The Paleocene isochore map displays an approximately symmetrical pattern, with thickening towards the center of the basin. This suggests the possibility of competing flexural loads. The base Eocene structure indicates an asymmetric deep on the northeast flank of the basin, providing flexural evidence of contemporaneous uplift/loading of the Nacimiento uplift and Archuleta arch; this has been modeled as ~2.1 km load height. Both Cretaceous and Paleocene sedimentary wedges are narrow, suggesting low flexural rigidity; modeled effective elastic thicknesses (EET) are 20-30 km, comparable to estimates of modern EET for the region.

Colorado, New Mexico↗
USGS2025

Origin of the high Pd/Pt ratio of the J-M Reef, Stillwater Complex Montana USA

The J-M Reef of the Stillwater Complex exhibits a high and consistent Pd/Pt ratio (~3.8). This ratio results from the equilibration of an immiscible sulfide liquid with a relatively high Pd/Pt silicate melt rather than an unusually Pd- and Pt-enriched parental melt. Numerical modeling suggests that the original silicate melt contained typical mantle-derived concentrations of Pd and Pt (~10–20 ppb Pd/Pt ~1). The partitioning of Pt and Pd between sulfide liquid and silicate melt alone cannot explain the consistently high Pd/Pt ratio across variable melt-to-sulfide mass ratios (R factors). Instead Pt-depletion caused by the early fractionation of Pt-alloy from S-undersaturated silicate magma likely established the high Pd/Pt signature. High Pd/Pt ratios can form through batch equilibration of sulfide liquid with silicate melt if partition coefficients are extremely high (>10⁶). Alternatively Pd enrichment may result from sulfide upgrading within the resident footwall mush under smaller partition coefficients (10⁴–10⁶) in this model the instantaneous R factors remain low (R ≈ 100–700). This limits the impact of Pt and Pd partitioning on sulfide composition and helps explain the Pd-enriched character of the J-M Reef.

Montana↗