USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources

The Hatu gold anomaly, Xinjiang-Uygur Autonomous Region, China - testing the hypothesis of aeolian transport of gold

In 1987, a cooperative project between the U.S. Geological Survey and the Institute of Geophysical and Geochemical Exploration was initiated to evaluate the origin of the Hatu gold anomaly. The anomaly is located in the Hatu mining district in the northwest corner of Xinjiang-Uygur Autonomous Region in northwest China. The climate is semiarid to arid and wind erosion predominates. A regional soil survey of the Hatu district, based on samples collected on a 200 by 500 m grid and composited prior to chemical analysis to a density of one sample per square km, delineated a series of south-southeast-trending Au anomalies. Anomalous Au values range from 5 ppb to more than 700 ppb. The Hatu anomaly, the most prominent of these anomalies, is more than 30 km long and about 5 km wide. The mining town of Hatu and the economic gold deposits of Qiqu 1 and Qiqu 2 are at the northern end of this anomaly. The axis of the Hatu anomaly cuts across mapped structure and stratigraphy in the district, but is parallel to the prevailing wind direction. This observation led to the hypothesis that the Hatu anomaly is the result of acolian dispersion of gold from the vicinity of Qiqu 1 and Qiqu 2. The alternative interpretation, that the anomalies reflected additional primary gold occurrences, was not consistent with existing information on the known occurrences and the geology.

Journal of Geochemical Exploration↗

Spatial and temporal variability in oceanographic and meteorologic forcing along Central California and its implications on nearshore processes

In the past two decades, the understanding of the important large-scale phenomena (El Niño, upwelling, California current, etc) that drive physical, chemical, and biological processes along the US West Coast has greatly improved. However, the ability to predict the influence of annual and inter-annual events on a regional scale still remains limited. High-resolution hourly data from 6 National Oceanographic and Atmospheric Administration (NOAA) buoys deployed since the early 1980's off Central California were analyzed to improve our understanding of spatial and temporal variability of oceanographic and meteorologic forcing along the coastline. Seasonal to inter-annual trends in wave height, wave period, sea level barometric pressure, sea-surface temperature, and wind direction were identified, as were significant departures in these trends during El Niño and La Niña periods. The results suggest there are increasing wave heights and wave periods, decreasing sea level barometric pressures and variability in sea-surface temperatures, and increasingly variable winds off Central California between 1980 and 2002. The impact of these climatic trends on coastal physical, geological and biologic processes will also be addressed.

California↗

A Holocene paleosecular variation from 14C-dated volcanic rocks in western North America

A paleosecular variation (PSV) curve for western North America is presented on the basis of 94 virtual geomagnetic poles (VGPs) from dated volcanic rocks sampled at 446 sites. Approximately 60% of the paleomagnetic database has been previously published. A curve defined by “spherical smoothed splines” is fitted to the VGPs, ranked by the quality of the age determinations, where the data density is highest between 3690 and −30 years before present (B.P.) (A.D. 1950), between 7800 and 7050 years B.P., and between 14,060 and 12,700 years B.P. The younger segments of the curve derived from volcanic rocks are similar but less complex than other high-resolution PSV curves derived from lacustrine sediments, particularly the record at Fish Lake, Oregon. The PSV record from lava flows (PSVL), however, is perhaps more reliable in its general shape and chronology because of the higher fidelity of volcanic rocks as magnetic field recorders and because of the greater density of 14 C dates. The new PSVL record provides a partial Holocene master curve for western North America and will be of particular value in dating geological and archeological materials using paleomagnetic directions.

Arizona, California, Colorado, Idaho, New Mexico, ↗

Enhanced visualization for the interpretation of Magellan radar data: Supplement to the Magellan special issue

The differences of radar data from more familiar photographic images, coupled with the unique geologic characteristics of Venus's surface, can make interpretation of the standard Magellan data products difficult for both planetary scientists and nonspecialists. We describe a set of digital processing techniques for transforming individual remote‐sensing datasets in order to make the information they contain more apparent, and for combining multiple datasets of diverse resolution and information content into synthetic images that allow the viewer to explore correlations among the data. The creation of derived data products by techniques like those we describe is becoming increasingly widespread and important, both for scientific research and for use in educational and media presentations. We apply our processing techniques to Magellan synthetic aperture radar images, altimetry, and microwave emissivity measurements of four areas that exemplify some of the most important styles of geologic activity on Venus.

Journal of Geophysical Research E: Planets↗

Evapotranspiration estimation using a normalized difference vegetation index transformation of satellite data

Evapotranspiration of irrigated crops on two irrigation service areas along the lower Colorado River was estimated using a normalized difference vegetation index of satellite data. A procedure was developed which equated the index to crop coefficients. Evapotranspiration estimates for fields for three dates of thematic mapper data were highly correlated with ground estimates. Service area estimates using thematic mapper and Advanced Very High Resolution Radiometer data agreed well with estimates based on US Geological Survey gauging station data.

Hydrological Sciences Journal↗

Theoretical Evaluation of the Transient Response of Constant Head and Constant Flow-Rate Permeability Tests

A theoretical analysis is presented that compares the response characteristics of the constant head and the constant flowrate (flow pump) laboratory techniques for quantifying the hydraulic properties of geologic materials having permeabilities less than 10-10 m/s. Rigorous analytical solutions that describe the transient distributions of hydraulic gradient within a specimen are developed, and equations are derived for each method. Expressions simulating the inflow and outflow rates across the specimen boundaries during a constant-head permeability test are also presented. These solutions illustrate the advantages and disadvantages of each method, including insights into measurement accuracy and the validity of using Darcy's law under certain conditions. The resulting observations offer practical considerations in the selection of an appropriate laboratory test method for the reliable measurement of permeability in low-permeability geologic materials.

Geotechnical Testing Journal↗

Quartz solubility in hydrothermal seawater: An experimental study and equation describing quartz solubility for up to 0.5 M NaCl solutions

Experimental investigations confirm an increase of quartz solubility in sea-water relative to distilled water. Combination of the experimental data with published data, most of which related to distilled water, permitted construction of a database for calculating an equation that fits all the data. Application of the equation indicates a shallower depth of circulation for sea- floor hydrothermal waters than has previously been calculated. Use of the equation as a quartz geothermometer-geobarometer has applications not only for hydrothermal sea-water systems, but also for other geothermal and geological systems.

American Journal of Science↗

Factors controlling storm impacts on coastal barriers and beaches - A preliminary basis for near real-time forecasting

Analysis of ground conditions and meteorological and oceanographic parameters for some of the most severe Atlantic and Gulf Coast storms in the U.S. reveals the primary factors affecting morphological storm responses of beaches and barrier islands. The principal controlling factors are storm characteristics, geographic position relative to storm path, timing of storm events, duration of wave exposure, wind stress, degree of flow confinement, antecedent topography and geologic framework, sediment textures, vegetative cover, and type and density of coastal development. A classification of commonly observed storm responses demonstrates the sequential interrelations among (1) land elevations, (2) water elevations in the ocean and adjacent lagoon (if present), and (3) stages of rising water during the storm. The predictable coastal responses, in relative order from high frequency beach erosion to low frequency barrier inundation, include: beach erosion, berm migration, dune erosion, washover terrace construction, perched fan deposition, sheetwash, washover channel incision, washout formation, and forced and unforced ebb flow. Near real-time forecasting of expected storm impacts is possible if the following information is available for the coast: a detailed morphological and topographic characterization, accurate storm-surge and wave-runup models, the real-time reporting of storm parameters, accurate forecasts of the storm position relative to a particular coastal segment, and a conceptual model of geological processes that encompasses observed morphological changes caused by extreme storms.

Journal of Coastal Research↗

A bibliometric profile of the Remote Sensing Open Access Journal published by MDPI between 2009 and 2018

Remote Sensing Open Access Journal (RS OAJ) is an international leading journal in the field of remote sensing science and technology. It was first published in the year 2009 and is currently celebrating tenth year of publications. In this research, a bibliometric analysis of RS OAJ was conducted based on 5588 articles published during the 10-year (2009–2018) time-period. The bibliometric analysis includes a comprehensive set of indicators such as dynamics and trends of publications, journal impact factor, total cites, eigenfactor score, normalized eigenfactor, CiteScore, h-index, h-classic publications, most productive countries (or territories) and institutions, co-authorship collaboration about countries (territories), research themes, citation impact of co-occurrences keywords, intellectual structure, and knowledge commutation. We found that publications of RS OAJ presented an exponential growth in the past ten years. From 2010 to 2017 (for which complete years data were available), the h-index of RS OAJ is 67. From 2009–2018, RS OAJ includes publications from 129 countries (or territories) and 3826 institutions. The leading nations contributing articles, based on 2009–2018 data, and listed based on ranking were: China, United States, Germany, Italy, France, Spain, Canada, England, Australia, Netherlands, Japan, Switzerland and Austria. The leading institutions, also for the same period and listed based on ranking were: Chinese Academy of Sciences, Wuhan University, University of Chinese Academy of Sciences, Beijing Normal University, The university of Maryland, National Aeronautics and Space Administration, National Oceanic and Atmospheric Administration, China University of Geosciences, United States Geological Survey, German Aerospace Centre, University of Twente, and California Institute of Technology. For the year 2017, RS OAJ had an impressive journal impact factor of 3.4060, a CiteScore of 4.03, eigenfactor score of 0.0342, and normalized eigenfactor score of 3.99. In addition, based on 2009–2018, data co-word analysis determined that “remote sensing”, “MODIS”, “Landsat”, “LiDAR” and “NDVI” are the high-frequency of author keywords co-occurrence in RS OAJ. The main themes of RS OAJ are multi-spectral and hyperspectral remote sensing, LiDAR scanning and forestry remote sensing monitoring, MODIS and LAI data applications, Remote sensing applications and Synthetic Aperture Radar (SAR). Through author keywords citation impact analysis, we find the most influential keyword is Unmanned Aerial Vehicle (UAV), followed, forestry, Normalized Difference Vegetation Index (NDVI), terrestrial laser scanning, airborne laser scanning, forestry inventory, urban heat island, monitoring, agriculture, and laser scanning. By analyzing the intellectual structure of RS OAJ, we identify the main reference publications and find that the themes are about Random Forests, MODIS vegetation indices and image analysis, etc. RS OAJ ranks first in cited journals and third in citing, this indicates that RS OAJ has the internal knowledge flow. Our results will bring more benefits to scholars, researchers and graduate students, who hopes to get a quick overview of the RS OAJ. And this article will also be the starting point for communication between scholars and practitioners. Finally, this paper proposed a nuanced h-index (nh-index) to measure productivity and intellectual contribution of authors by considering h-index based on whether the one is first, second, third, or nth author. This nuanced approach to determining h-index of authors is powerful indicator of an academician’s productivity and intellectual contribution.

Remote Sensing↗

Introduction to special section: The Trans-Alaska Crustal Transect (TACT) across Arctic Alaska

This special section of the Journal of Geophysical Research addresses the composition and structural evolution of the lithosphere in northern Alaska. Investigations reported in this section were mainly undertaken as part of the Trans‐Alaska Crustal Transect (TACT), an integrated geological and geophysical transect of the entire Alaskan lithosphere along a north‐south corridor undertaken from 1984 to 1992 (Figure 1). The onshore segment of the transect approximately follows along the route of the trans‐Alaskan pipeline; the offshore segment extends across the continental margin in the Gulf of Alaska to the Pacific plate. The TACT line is unique in that it provides a coordinated onshore/offshore geological and geophysical traverse of the North American plate in Alaska from the active convergent Pacific margin to the passive Arctic margin of the continent.

Alaska↗

Geologic map of Mount Mazama and Crater Lake Caldera, Oregon, including the database for the geologic map of Mount Mazama and Crater Lake Caldera, Oregon

Crater Lake partly fills one of the most spectacular calderas of the world, an 8-by-10-km basin more than 1 km deep formed by collapse of the volcano known as Mount Mazama (fig. 1) during a rapid series of explosive eruptions about 7,700 years ago. Having a maximum depth of 594 m, Crater Lake is the deepest lake in the United States. Crater Lake National Park, dedicated in 1902, encompasses 645 km2 of pristine forested and alpine terrain, including the lake itself, virtually all of Mount Mazama, and most of the area of the geologic map. The geology of the area was first described in detail by Diller and Patton (1902) and later by Williams (1942), whose vivid account led to international recognition of Crater Lake as the classic collapse caldera. Because of excellent preservation and access, Mount Mazama, Crater Lake caldera, and the deposits formed by the climactic eruption constitute a natural laboratory for study of volcanic and magmatic processes. For example, the climactic ejecta are renowned among volcanologists as evidence for systematic compositional zonation within a subterranean magma chamber. Mount Mazama's climactic eruption also is important as the source of the widespread Mazama ash, a useful Holocene stratigraphic marker throughout the Pacific Northwest, adjacent Canada, and offshore. A detailed bathymetric survey of the floor of Crater Lake in 2000 (Bacon and others, 2002) provides a unique record of postcaldera eruptions, the interplay between volcanism and filling of the lake, and sediment transport within this closed basin. Knowledge of the geology and eruptive history of the Mount Mazama edifice, greatly enhanced by the caldera wall exposures, gives exceptional insight into how large volcanoes of magmatic arcs grow and evolve. Lastly, the many smaller volcanoes of the High Cascades beyond the limits of Mount Mazama are a source of information on the flux of mantle-derived magma through the region. General principles of magmatic and eruptive processes revealed by the present study have been incorporated not only in scientific investigations elsewhere, but in the practical evaluation of hazards (Bacon and others, 1997b) and geothermal resources (Bacon and Nathenson, 1996) in the Crater Lake region. In addition to papers in scientific journals, field trip guides, and the hazard and geothermal reports, the major product of this long-term study of Mount Mazama is the geologic map. The map is unusual because it portrays bedrock (outcrop), surficial, and lake floor geology. Caldera wall geology is depicted in detail on the accompanying geologic panoramas.

Oregon↗

Tomographic Rayleigh-wave group velocities in the Central Valley, California centered on the Sacramento/San Joaquin Delta

If shaking from a local or regional earthquake in the San Francisco Bay region were to rupture levees in the Sacramento/San Joaquin Delta then brackish water from San Francisco Bay would contaminate the water in the Delta: the source of fresh water for about half of California. As a prelude to a full shear-wave velocity model that can be used in computer simulations and further seismic hazard analysis, we report on the use of ambient noise tomography to build a fundamental-mode, Rayleigh-wave group velocity model for the region around the Sacramento/San Joaquin Delta in the western Central Valley, California. Recordings from the vertical component of about 31 stations were processed to compute the spatial distribution of Rayleigh wave group velocities. Complex coherency between pairs of stations were stacked over 8 months to more than a year. Dispersion curves were determined from 4 to about 18 seconds. We calculated average group velocities for each period and inverted for deviations from the average for a matrix of cells that covered the study area. Smoothing using the first difference is applied. Cells of the model were about 5.6 km in either dimension. Checkerboard tests of resolution, which is dependent on station density, suggest that the resolving ability of the array is reasonably good within the middle of the array with resolution between 0.2 and 0.4 degrees. Overall, low velocities in the middle of each image reflect the deeper sedimentary syncline in the Central Valley. In detail, the model shows several centers of low velocity that may be associated with gross geologic features such as faulting along the western margin of the Central Valley, oil and gas reservoirs, and large cross cutting features like the Stockton arch. At shorter periods around 5.5s, the model’s western boundary between low and high velocities closely follows regional fault geometry and the edge of a residual isostatic gravity low. In the eastern part of the valley, the boundaries of the low velocity zone and gravity anomaly are better aligned at longer periods (around 10.5s) suggesting that the eastern edge of the gravity low is associated with deeper structure. There is a strong correspondence between a low in gravity near the Kirby Hills fault and low velocities from the ambient noise tomography. At longer periods, higher velocities creep in from the east and narrow the overall dimension defined by the lower velocities. Overall, there is a strong correspondence between the shape and location of low velocities in the Rayleigh wave velocity images, and geological and geophysical features.

California↗

A geochemical sampling technique for use in areas of active alpine glaciation: an application from the central Alaska Range

In mountainous regions containing extensive glacier systems there is a lack of suitable material for conventional geochemical sampling. As a result, in most geochemical sampling programs a few stream-sediment samples collected at, or near, the terminus of valley glaciers are used to evaluate the mineral potential of the glaciated area. We have developed and tested a technique which utilizes the medial moraines of valley glaciers for systematic geochemical exploration of the glacial catchment area. Moraine sampling provides geochemical information that is site-specific in that geochemical anomalies can be traced directly up-ice to bedrock sources. Traverses were made across the Trident and Susitna glaciers in the central Alaska Range where fine-grained (clay to sand size) samples were collected from each medial moraine. These samples were prepared and chemically analyzed to determine the concentration of specific elements. Fifty pebbles were collected at each moraine for archival purposes and for subsequent lithologic identification. Additionally, fifty cobbles and fifty boulders were examined and described at each sample site to determine the nature and abundance of lithologies present in the catchment area, the extent and nature of visible mineralization, the presence and intensity of hydrothermal alteration and the existence of veins, dikes and other minor structural features. Results from the central Alaska Range have delineated four distinct multi-element anomalies which are a response to potential mineralization up-ice from the medial moraine traverse. By integrating the lithologic, mineralogical and geochemical data the probable geological setting of the geochemical anomalies is determined.

Journal of Geochemical Exploration↗

Mapping Curie temperature depth in the western United States with a fractal model for crustal magnetization

We have revisited the problem of mapping depth to the Curie temperature isotherm from magnetic anomalies in an attempt to provide a measure of crustal temperatures in the western United States. Such methods are based on the estimation of the depth to the bottom of magnetic sources, which is assumed to correspond to the temperature at which rocks lose their spontaneous magnetization. In this study, we test and apply a method based on the spectral analysis of magnetic anomalies. Early spectral analysis methods assumed that crustal magnetization is a completely uncorrelated function of position. Our method incorporates a more realistic representation where magnetization has a fractal distribution defined by three independent parameters: the depths to the top and bottom of magnetic sources and a fractal parameter related to the geology. The predictions of this model are compatible with radial power spectra obtained from aeromagnetic data in the western United States. Model parameters are mapped by estimating their value within a sliding window swept over the study area. The method works well on synthetic data sets when one of the three parameters is specified in advance. The application of this method to western United States magnetic compilations, assuming a constant fractal parameter, allowed us to detect robust long-wavelength variations in the depth to the bottom of magnetic sources. Depending on the geologic and geophysical context, these features may result from variations in depth to the Curie temperature isotherm, depth to the mantle, depth to the base of volcanic rocks, or geologic settings that affect the value of the fractal parameter. Depth to the bottom of magnetic sources shows several features correlated with prominent heat flow anomalies. It also shows some features absent in the map of heat flow. Independent geophysical and geologic data sets are examined to determine their origin, thereby providing new insights on the thermal and geologic crustal structure of the western United States.

Journal of Geophysical Research B: Solid Earth↗

Venus cartography

The entire surface of the planet Venus is being mapped at global and regional scales (1:50,000,000 through 1:1,500,000) with synthetic aperture radar (SAR), radar altimeter, and radiometer measurements of physical properties from the Magellan spacecraft. The mapping includes SAR image mosaics, shaded relief maps, and topographic contour overlays made from altimetry data and by radargrammetric methods. Methods used include new techniques of radar image processing that became operational as a result of the Magellan mission. The area being mapped (at a resolution of 75 m/pixel) is roughly equivalent to that of Earth, including seafloors. The mapping is designed to support geologic and geophysical investigations.

Journal of Geophysical Research E: Planets↗

Precise determination of δ 88 Sr in rocks, minerals, and waters by double-spike TIMS: A powerful tool in the study of chemical, geologic, hydrologic and biologic processes

We present strontium isotopic ( 88 Sr/ 86 Sr and 87 Sr/ 86 Sr) results obtained by 87 Sr– 84 Sr double spike thermal ionization mass-spectrometry (DS-TIMS) for several standards as well as natural water samples and mineral samples of abiogenic and biogenic origin. The detailed data reduction algorithm and a user-friendly Sr-specific stand-alone computer program used for the spike calibration and the data reduction are also presented. Accuracy and precision of our δ 88 Sr measurements, calculated as permil (‰) deviations from the NIST SRM-987 standard, were evaluated by analyzing the NASS-6 seawater standard, which yielded δ 88 Sr = 0.378 ± 0.009‰. The first DS-TIMS data for the NIST SRM-607 potassium feldspar standard and for several US Geological Survey carbonate, phosphate, and silicate standards (EN-1, MAPS-4, MAPS-5, G-3, BCR-2, and BHVO-2) are also reported. Data obtained during this work for Sr-bearing solids and natural waters show a range of δ 88 Sr values of about 2.4‰, the widest observed so far in terrestrial materials. This range is easily resolvable analytically because the demonstrated external error (±SD, standard deviation) for measured δ 88 Sr values is typically ≤0.02‰. It is shown that the “true” 87 Sr/ 86 Sr value obtained by the DS-TIMS or any other external normalization method combines radiogenic and mass-dependent mass-fractionation effects, which cannot be separated. Therefore, the “true” 87 Sr/ 86 Sr and the δ 87 Sr parameter derived from it are not useful isotope tracers. Data presented in this paper for a wide range of naturally occurring sample types demonstrate the potential of the δ 88 Sr isotope tracer in combination with the traditional radiogenic 87 Sr/ 86 Sr tracer for studying a variety of biological, hydrological, and geological processes.

Journal of Analytical Atomic Spectrometry↗

Oil, gas field growth projections: Wishful thinking or reality?

The observed `field growth' for the period from 1992 through 1996 with the US Geological Survey's (USGS) predicted field growth for the same period are compared. Known field recovery of field size is defined as the sum of past cumulative field production and the field's proved reserves. Proved reserves are estimated quantities of hydrocarbons which geologic and engineering data demonstrate with reasonable certainty to recoverable from known fields under existing economic and operating conditions. Proved reserve estimates calculated with this definition are typically conservative. The modeling approach used by the USGS to characterize `field growth phenomena' is statistical rather that geologic in nature.

Oil & Gas Journal↗