USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources
USGS1977

A reconnaissance investigation of a large meromictic lake in southeastern Alaska

Redoubt Lake is one of the largest documented meromictic lakes in North America. The chemocline extends in depth from 80 to 100 m (meters) and the steepest gradient is between 98 and 100 m. The monimolimnion is anoxic, contains hydrogen sulflde, and has a salinity about two-thirds that of seawater. Turnover appears to introduce additional sodium chloride from the chemocline to the mixolimnion, but diffusion is probably the dominant mixing mechanism. Vertical profiles show a dichothermic temperature curve. A minimum temperature of 3°C in the chemocline is unexplained, but higher temperatures in the monimolimnion may be a result of solar radiation. At the lower limit of the chemocline there is a sharp decrease in pH, which could be due to bacterial action. Redoubt Lake is probably a relict fiord. The data presented herein support the hypothesis that the lake was gradually isolated from the sea by uplift. While seawater was entering the lake, it probably mixed with the freshwater in the mixolimnion and therefore the monimolimnion is less saline than seawater. Geologic and geophysical evidence support the speculation that significant amounts of saltwater inflow probably ceased about 650-800 years before the present.

Alaska↗
USGS2017

Geophysical characterization of seismic station sites in the United States – The importance of a flexible, multi-method approach

Noninvasive geophysical site characterization methods were used in two recent projects to obtain shear-wave velocity (VS) profiles to a minimum depth of 30 m and the time-averaged VS of the upper 30 meters (VS30) at seismic station sites. These projects include the 2009 American Recovery and Reinvestment Act (ARRA) funded U.S. Geological Survey site characterization project for 191 sites in California and the Central-eastern United States (CEUS), and the 2012 Electric Power Research Institute (EPRI) funded project for 33 additional CEUS sites. These sites are located in rural to urban settings with topographic conditions ranging from relatively flat sedimentary basins to mountaintop ridges. About 60 percent of the ARRA sites and 80 percent of the EPRI sites are located on rock or have thin sediment cover over rock, including Quaternary volcanic rock, Tertiary sediments and sedimentary rock, and Mesozoic (or older) crystalline or sedimentary rock. The remaining sites consist of thick sequences of Quaternary sediments overlying older sediments and rock. ARRA sites were characterized using non-invasive active and passive surface-wave methods, including the horizontal-tovertical spectral ratio (HVSR) method and one or more of the following: spectral analysis of surface waves (SASW), multichannel analysis of surface waves (MASW; Rayleigh and Love waves) and, occasionally, array microtremor (linear and 2-D arrays) methods. P-wave seismic refraction data were also acquired at rock and shallow-rock sites. S-wave seismic refraction and/or Love-wave MASW methods were applied at sites where characterization proved difficult with Rayleighwave methods. Based on our experience from the ARRA project, we acquired Rayleigh- and Love-wave based MASW and P- and S-wave refraction data for the EPRI project at CEUS sites. The HVSR method was found to be useful for identifying shallow-rock sites and for evaluating the relative variability of the depth-to-rock interface beneath the seismic station and the testing array(s). The fundamental mode modeling assumption was generally valid at most of these sites; nevertheless, multi-mode or effective-mode modeling routines were occasionally required, particularly in the case of shallow high-velocity layers. Deep sediment sites were characterized using active and, when appropriate, passive surface-wave based methods. Rock and shallow sediment sites were generally more challenging to characterize than deep sediment sites. About 10 percent of rock sites could not be characterized using surface wave methods, thus these sites were characterized using body-wave refraction methods. Love wave methods were found to be more effective than Rayleigh wave methods at some rock and shallow-rock sites (e.g., sites with shallow rock and sites with a thin low-velocity, highly attenuating surface layer). Lateral velocity variability was found to be very common at rock and shallow-rock sites, often causing significant scatter in the surface-wave dispersion data. Seismic refraction models have demonstrated that it may not be unusual for VS30 to vary by 20 percent, or more, over small distances (several tens of meters) at such sites. Based on these experiences, it is important to consider the application of combinations of methods when using noninvasive geophysical approaches to characterize seismic site conditions.

Conference Paper↗
USGS2002

Lithologic and ground-water data for monitoring sites in the Mojave River and Warren Valley basins, San Bernardino County, California, 1992-1998

Lithologic and ground-water data were collected at 85 monitoring sites constructed in the Mojave Water Agency Management area in San Bernardino County, California, as part of a series of cooperative studies between the U.S. Geological Survey and the Mojave Water Agency. The data are being used to evaluate and address water-supply and water-quality issues. This report presents a compilation of the data collected at these sites from 1992 through 1998, including location and design of the monitoring sites, lithologic data, geophysical logs, ground-water-level measurements, and water-quality analyses.One to five small (generally 2-inch) diameter wells were installed at each of the 85 monitoring sites to collect depth-dependent hydrologic data. Lithologic logs were compiled from descriptions of drill cuttings collected at each site and from observations recorded during the drilling of the borehole. Generalized stratigraphic columns were compiled by grouping similar lithologic units. Geophysical logs provide information on the character of the lithologic units and on the presence of ground water and the chemical characteristics of that water. Water-level and water-quality data were collected periodically from the sites during 1992 through 1998.

Open-File Report↗
USGS1982

A plan for hydrologic investigations of in situ, oil-shale retorting near Rock Springs, Wyoming

The recovery of shale oil by the in-situ retort process may cause hydrologic impacts, the most significant being ground-water contamination and possible transport of contaminants into surrounding areas. Although these impacts are site-specific, many of the techniques used to investigate each retort operation commonly will be the same. The U.S. Geological Survey has begun a study of hydrologic impacts in the area of an in-situ retort near Rock Springs, Wyoming, as a means of refining and demonstrating these techniques. Geological investigations include determining the areal extent and thickness of aquifers. Emphasis will be placed on determining lithologic variations from geophysical logging. Hydrologic investigations include mapping of potentiometric surfaces, determining rates of ground-water discharge, and estimating aquifer properties by analytical techniques. Water-quality investigations include monitoring solute migration from the retort site and evaluating sampling techniques by standard statistical procedures. A ground-water-flow and solute-transport model will be developed to predict future movement of the water plume away from the retort. (USGS)

Open-File Report↗
USGS1983

Hydrogeologic data from parts of the Denver basin, Colorado

This report presents hydrogeologic data collected and compiled during 1956-81 as part of a comprehensive hydrogeologic data collected and compiled during 1956-81 as part of a comprehensive hdryogeologic investigation of the Denver basin, Colorado, by the U.S. Geological Survey in cooperation with the Colorado Department of Natural Resources, Division of Water Resources, Office of the State Engineer. The data, in tabular and graphic form, consist of records for 870 wells which include water-level data for 158 wells and water-quality analyses for 561 wells; geophysical logs from three wells which include resistivity, self potential, and natural gamma logs; and gain-and-loss data of streamflow measured at 54 sites.

Colorado↗
USGS1999

Earthquake probabilities in the San Francisco Bay region: 2000 to 2030 - A summary of findings

The San Francisco Bay region sits astride a dangerous “earthquake machine,” the tectonic boundary between the Pacific and North American Plates. The region has experienced major and destructive earthquakes in 1838, 1868, 1906, and 1989, and future large earthquakes are a certainty. The ability to prepare for large earthquakes is critical to saving lives and reducing damage to property and infrastructure. An increased understanding of the timing, size, location, and effects of these likely earthquakes is a necessary component in any effective program of preparedness. This study reports on the probabilities of occurrence of major earthquakes in the San Francisco Bay region (SFBR) for the three decades 2000 to 2030. The SFBR extends from Healdsberg on the northwest to Salinas on the southeast and encloses the entire metropolitan area, including its most rapidly expanding urban and suburban areas. In this study a “major” earthquake is defined as one with M≥6.7 (where M is moment magnitude). As experience from the Northridge, California (M6.7, 1994) and Kobe, Japan (M6.9, 1995) earthquakes has shown us, earthquakes of this size can have a disastrous impact on the social and economic fabric of densely urbanized areas. To reevaluate the probability of large earthquakes striking the SFBR, the U.S. Geological Survey solicited data, interpretations, and analyses from dozens of scientists representing a wide crosssection of the Earth-science community (Appendix A). The primary approach of this new Working Group (WG99) was to develop a comprehensive, regional model for the long-term occurrence of earthquakes, founded on geologic and geophysical observations and constrained by plate tectonics. The model considers a broad range of observations and their possible interpretations. Using this model, we estimate the rates of occurrence of earthquakes and 30-year earthquake probabilities. Our study considers a range of magnitudes for earthquakes on the major faults in the region—an innovation over previous studies of the SFBR that considered only a small number of potential earthquakes of fixed magnitude.

California↗
USGS2011

Geologic map of Big Bend National Park, Texas

The purpose of this map is to provide the National Park Service and the public with an updated digital geologic map of Big Bend National Park (BBNP). The geologic map report of Maxwell and others (1967) provides a fully comprehensive account of the important volcanic, structural, geomorphological, and paleontological features that define BBNP. However, the map is on a geographically distorted planimetric base and lacks topography, which has caused difficulty in conducting GIS-based data analyses and georeferencing the many geologic features investigated and depicted on the map. In addition, the map is outdated, excluding significant data from numerous studies that have been carried out since its publication more than 40 years ago. This report includes a modern digital geologic map that can be utilized with standard GIS applications to aid BBNP researchers in geologic data analysis, natural resource and ecosystem management, monitoring, assessment, inventory activities, and educational and recreational uses. The digital map incorporates new data, many revisions, and greater detail than the original map. Although some geologic issues remain unresolved for BBNP, the updated map serves as a foundation for addressing those issues. Funding for the Big Bend National Park geologic map was provided by the United States Geological Survey (USGS) National Cooperative Geologic Mapping Program and the National Park Service. The Big Bend mapping project was administered by staff in the USGS Geology and Environmental Change Science Center, Denver, Colo. Members of the USGS Mineral and Environmental Resources Science Center completed investigations in parallel with the geologic mapping project. Results of these investigations addressed some significant current issues in BBNP and the U.S.-Mexico border region, including contaminants and human health, ecosystems, and water resources. Funding for the high-resolution aeromagnetic survey in BBNP, and associated data analyses and interpretation, was from the USGS Crustal Geophysics and Geochemistry Science Center. Mapping contributed from university professors and students was mostly funded by independent sources, including academic institutions, private industry, and other agencies.

Texas↗
USGS2015

Geohydrologic and water-quality characterization of a fractured-bedrock test hole in an area of Marcellus shale gas development, Tioga County, Pennsylvania

An integrated analysis of core, geophysical logs, gas isotopes, and specific-depth water-quality samples from the Cherry Flats test hole was used to characterize the stratigraphy, water-bearing zones, and groundwater quality at a site in southern Tioga County, Pennsylvania. The study was completed as a cooperative effort between the Pennsylvania Department of Natural Resources, Bureau of Topographic and Geologic Survey (BTGS) and the U.S. Geological Survey (USGS). The multi-disciplinary characterization of the test hole provided information to aid the bedrock mapping of the Cherry Flats 7.5-minute quadrangle by BTGS, and to help quantify the depth and character of fresh and saline groundwater in an area of shale-gas exploration. The Cherry Flats test hole was cored to a depth of 1,513 feet (ft) below land surface (bls) and cased to 189 ft through the collapsed mine workings of the former Arnot No. 2 underground coal mine. The test hole penetrated 128.0 ft of Allegheny Formation and 154.1 ft of Pottsville Formation of Pennsylvanian age, 564.8 ft of Huntley Mountain Formation of Mississippian and Devonian age, and 666.3 ft of Catskill Formation of Devonian age. Core recovery was nearly 100 percent, except where complete core loss occurred from a depth of 1,231.1 to 1,240.8 ft. Several coal beds and mined-out coal horizons were penetrated in the Allegheny and Pottsville Formations. The test hole penetrated the entire thickness of the Huntley Mountain Formation and was completed in the middle part of the Catskill Formation. Bedding features penetrated by the test hole were estimated to have a strike of 021 degrees and dip about 1.7 degrees to the southeast, consistent with the test-hole location on the north limb of the Blossburg syncline. Most fractures penetrated by the test hole were parallel to bedding, with steeply dipping fractures present but much less common. Fracture density, determined from optical televiewer, acoustic televiewer, and video logs, generally increased with depth from the base of casing to about 400 ft bls, then decreased with depth to the bottom of the hole except for an increase from 506 to 568 ft bls. Very few fractures were penetrated from 600 to 850 ft. The depths of fresh and saline water-bearing zones were identified in the test hole by geophysical-log analysis and, for inflow zones, verified by specific-depth groundwater sampling by the use of a wire-line point sampler. Under ambient conditions and during pumping of the test hole, fresh water entered the hole from fractures at 567 and 580.5 ft bls, within grayish-red siltstone and greenish-gray sandstone, respectively, and flowed upward and exited at fractures from 303 to 319.5 ft; a very minor amount exited into fractures within coal beds at 240.4 and 252 ft bls. Transmissivity, estimated from analysis of the specific-capacity data and flowmeter logs, was about 18 ft2/d for the fracture zones from 567 to 580.5 ft and 6.7 ft2/d for fracture zones from 240.4 to 252 ft bls. The analysis estimated the hydraulic head of the lower zone and that of the upper flow zone was 8 ft higher and 37 ft lower than the composite water level in the test hole, respectively. Water samples of the freshwater inflow from zones at 567 to 580.5 ft bls had a total dissolved solids concentration of 577 mg/L indicating that these zone are in the lower part of the active groundwater flow system. Below the freshwater-bearing zone at 580.5 ft, the flowmeter did not detect any vertical flow in the test hole, and the gradient of the temperature log approached the geothermal gradient, indicating little ambient fluid flow and minimal fracture transmissivity below this depth. However, small seeps of saline water having total dissolved solids concentrations of greater than about 6,200 mg/L at 945 and 946 ft bls, from dark-greenish-gray to greenish-gray silty beds, were delineated by a time series of specific conductancelogs and observed on the video log. A wat

Pennsylvania↗
USGS2021

Completion summary for boreholes USGS 148, 148A, and 149 at the Materials and Fuels Complex, Idaho National Laboratory, Idaho

In 2019, the U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, drilled and constructed boreholes USGS 148A and USGS 149 for stratigraphic framework analyses and long-term groundwater monitoring of the eastern Snake River Plain aquifer at the Idaho National Laboratory (INL) in southeastern Idaho. Initially, boreholes USGS 148A and USGS 149 were continuously cored to allow the USGS and INL subcontractor to collect select geophysical and seismic data and evaluate properties of recovered core material. The USGS geophysical data and descriptions of core material are described in this report; however, data collected by the INL contractor, including seismic data, are not included as part of the report. The unsaturated zone at both borehole locations is relatively thick, depth to water was measured at approximately 663.6 feet (ft) below land surface (BLS) in USGS 148A, and at approximately 654.1 ft BLS at USGS 149. On completion of coring and data collection, both boreholes (USGS 148A and USGS 149) were repurposed as monitoring wells. Well USGS 148A was constructed to a depth of 759 ft BLS and instrumented with a dedicated submersible pump and measurement line; well USGS 149 was constructed to a depth of 974 ft BLS and instrumented with a multilevel monitoring system (Westbay TM ). Geophysical data, collected by the USGS, were used to characterize the subsurface geology and aquifer conditions. Natural gamma log measurements were used to assess sediment-layer thickness and location. Neutron and gamma-gamma source logs were used to confirm fractured and vesicular basalt identified for aquifer testing and multilevel monitoring well zone testing. Acoustic televiewer logs, collected for well USGS 149, were used to identify fractures and assess groundwater movement when compared with neutron measurements. Furthermore, gyroscopic deviation measurements were used to measure horizontal and vertical displacement for the constructed boreholes USGS 148A and USGS 149. A single-well aquifer test was done in well USGS 148A during November 6–7, 2019, to provide estimates of transmissivity and hydraulic conductivity. Estimates for transmissivity and hydraulic conductivity were 6.34×10 3 feet squared per day and 3.17 feet per day, respectively. The aquifer test was run overnight (21.3 hours) and measured drawdown was relatively small (0.09 ft) at sustained pumping rates ranging from 15.7 to 16.1 gallons per minute. The transmissivity estimates for well USGS 148A were slightly lower than those determined from previous aquifer tests for wells near the Materials and Fuels Complex, but well within range of other aquifer tests done at the INL. Water-quality samples, collected from well USGS 148A and from four zones in well USGS 149, were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for most of the inorganic constituents showed similar chemistry in USGS 148A and all four zones in USGS 149. Water samples for stable isotopes of oxygen and hydrogen indicated some possible influence of irrigation on the water quality. Nitrate plus nitrite concentrations indicated influence from anthropogenic sources. The volatile organic compound and radiochemical data indicated that wastewater disposal practices at the Materials and Fuels Complex or from drilling had no detectable influence on these wells.

Idaho↗
USGS2020

Multiple-well monitoring site adjacent to the Lost Hills oil field, Kern County, California

The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating several questions about oil and gas development and groundwater resources in California, including (1) the location of groundwater resources; (2) the proximity of oil and gas operations and groundwater and the geologic materials between them; (3) the location of evidence (or no evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2019). As part of this evaluation, the USGS installed a multiple-well monitoring site in the southern San Joaquin Valley near Lost Hills, California, adjacent to the Lost Hills oil field. Data collected at the Lost Hills multiple-well monitoring site (LHSP) provide information about the geology, hydrology, geophysics, and geochemistry of the aquifer system, thus enhancing understanding of relations between adjacent groundwater and the Lost Hills oil field in an area where there is little groundwater data. This report presents construction information for the LHSP and initial geohydrologic data collected from the site.

California↗
USGS2013

Geology, water-quality, hydrology, and geomechanics of the Cuyama Valley groundwater basin, California, 2008--12

To assess the water resources of the Cuyama Valley groundwater basin in Santa Barbara County, California, a series of cooperative studies were undertaken by the U.S. Geological Survey and the Santa Barbara County Water Agency. Between 2008 and 2012, geologic, water-quality, hydrologic and geomechanical data were collected from selected sites throughout the Cuyama Valley groundwater basin. Geologic data were collected from three multiple-well groundwater monitoring sites and included lithologic descriptions of the drill cuttings, borehole geophysical logs, temperature logs, as well as bulk density and sonic velocity measurements of whole-core samples. Generalized lithologic characterization from the monitoring sites indicated the water-bearing units in the subsurface consist of unconsolidated to partly consolidated sand, gravel, silt, clay, and occasional cobbles within alluvial fan and stream deposits. Analysis of geophysical logs indicated alternating layers of finer- and coarser-grained material that range from less than 1 foot to more than 20 feet thick. On the basis of the geologic data collected, the principal water-bearing units beneath the monitoring-well sites were found to be composed of younger alluvium of Holocene age, older alluvium of Pleistocene age, and the Tertiary-Quaternary Morales Formation. At all three sites, the contact between the recent fill and younger alluvium is approximately 20 feet below land surface. Water-quality samples were collected from 12 monitoring wells, 27 domestic and supply wells, 2 springs, and 4 surface-water sites and were analyzed for a variety of constituents that differed by site, but, in general, included trace elements; nutrients; dissolved organic carbon; major and minor ions; silica; total dissolved solids; alkalinity; total arsenic and iron; arsenic, chromium, and iron species; and isotopic tracers, including the stable isotopes of hydrogen and oxygen, activities of tritium, and carbon-14 abundance. Of the 39 wells sampled, concentrations of total dissolved solids and sulfate from 38 and 37 well samples, respectively, were greater than the U.S. Environmental Protection Agency’s secondary maximum contaminant levels. Concentrations greater than the maximum contaminant levels for nitrate were observed in five wells and were observed for arsenic in four wells. Differences in the stable-isotopic values of hydrogen and oxygen among groundwater samples indicated that water does not move freely between different formations or between different zones within the Cuyama Valley. Variations in isotopic composition indicated that recharge is derived from several different sources. The age of the groundwater, expressed as time since recharge, was between 600 and 38,000 years before present. Detectable concentrations of tritium indicated that younger water, recharged since the early 1950s, is present in parts of the groundwater basin. Hydrologic data were collected from 12 monitoring wells, 56 domestic and supply wells, 3 surface-water sites, and 4 rainfall-gaging stations. Rainfall in the valley averaged about 8 inches annually, whereas the mountains to the south received between 12 and 19 inches. Stream discharge records showed seasonal variability in surface-water flows ranging from no-flow to over 1,500 cubic feet per second. During periods when inflow to the valley exceeds outflow, there is potential recharge from stream losses to the groundwater system Water-level records included manual quarterly depth-to-water measurements collected from 68 wells, time-series data collected from 20 of those wells, and historic water levels from 16 wells. Hydrographs of the manual measurements showed declining water levels in 16 wells, mostly in the South-Main zone, and rising water levels in 14 wells, mostly in the Southern Ventucopa Uplands. Time-series hydrographs showed daily, seasonal, and longer-term effects associated with local pumping. Water-level data from the multiple-well monitoring sites indicated seasonal fluctuations as great as 80 feet and water-level differences between aquifers as great as 40 feet during peak pumping season. Hydrographs from the multiple-well groundwater monitoring sites showed vertical hydraulic gradients were upward during the winter months and downward during the irrigation season. Historic hydrographs showed water-level declines in the Southern-Main, Western Basin, Caliente Northern-Main, and Southern Sierra Madre zone ranging from 1 to 7 feet per year. Hydrographs of wells in the Southern Ventucopa Uplands zone showed several years with marked increases in water levels that corresponded to increased precipitation in the Cuyama Valley. Investigation of hydraulic properties included hydraulic conductivity and transmissivity estimated from aquifer tests performed on 63 wells. Estimates of horizontal hydraulic conductivity ranged from about 1.5 to 28 feet per day and decreased with depth. The median estimated hydraulic conductivity for the older alluvium was about five times that estimated for the Morales Formation. Estimates of transmissivity ranged from 560 to 163,400 gallons per day per foot and decreased with depth. The median estimated transmissivity for the younger alluvium was about three times that estimated for the older alluvium. Geomechanical analysis included land-surface elevation changes at five continuously operating global positioning systems (GPS) and land-subsidence detection at five interferometric synthetic aperture radar (InSAR) reference points. Analysis of data collected from continuously operating GPS stations showed the mountains to the south and west moved upward about 1 millimeter (mm) annually, whereas the station in the center of the Southern-Main zone moved downward more than 7 mm annually, indicating subsidence. It is likely that this subsidence is inelastic (permanent) deformation and indicates reduced storage capacity in the aquifer sediments. Analysis of InSAR data showed local and regional changes that appeared to be dependent, in part, on the time span of the interferogram, seasonal variations in pumping, and tectonic uplift. Long-term InSAR time series showed a total maximum detected subsidence rate of approximately 12 mm per year at one location and approximately 8 mm per year at a second location, while short-term InSAR time series showed maximum subsidence of about 15 mm at one location and localized maximum uplift of about 10 mm at another location.

California↗
USGS2002

Hydrogeology and simulation of ground-water flow in the aquifers underlying Belvidere, Illinois

The U.S. Geological Survey investigated the ground-water-flow system and distribution of contaminants in the vicinity of Belvidere, Illinois, during 1992?2000. The study included the compilation, collection, and analyses of hydrogeologic and water-quality data and simulation of the ground-water-flow system. Hydrogeologic data include lithologic, stratigraphic, geophysical, hydraulic-property, water-level, ground-water withdrawal, and streamflow data. Water-quality data include analyses of water samples primarily for volatile organic compounds (VOC?s) and selectively for tritium and inorganic constituents. Data were collected from about 250 wells and 21 surfacewater sites. These data were used (1) to describe the hydrogeologic framework of the ground-waterflow system, preferential pathways and directions of ground-water movement and contaminant distribution, ground-water/surface-water relations, and the water budget and (2) to develop and calibrate the ground-water-flow model. The glacial drift (sand and gravel with some clay) and Galena-Platteville (fractured dolomite) aquifers and the sandstone aquifers of the Cambrian-Ordovician aquifer system compose the ground-water-flow system underlying Belvidere and vicinity. The Glenwood confining unit separates the Galena-Platteville aquifer from the underlying sandstone aquifers. The Galena- Platteville aquifer and confining unit may be absent in parts of the Troy Bedrock Valley, about 1.5 miles west of Belvidere. Throughout the study area, the Kishwaukee River and its tributaries seem to be gaining flow from shallow ground-water discharge. Potentiometric levels in the glacial drift and Galena-Platteville aquifers range from about 900 feet above sea level in the upland areas to 740 feet along the Kishwaukee River. Estimated horizontal hydraulic conductivity of the glacial drift aquifer ranges from about 0.13 to 280 feet per day. The Galena-Platteville aquifer is a dual-porosity unit with the greatest percentage of flow through fractures and bedding-plane partings. Estimated horizontal hydraulic conductivity ranges from about 0.005 to 2,500 feet per day. Estimated horizontal hydraulic conductivity of the St. Peter aquifer (the uppermost sandstone aquifer of the Cambrian-Ordovician aquifer system ranges from about 4.7 to 17.5 feet per day. Volatile organic compounds have been detected in all aquifers underlying Belvidere. Trichloroethene and tetrachloroethene are the principal VOC?s detected at concentrations above regulatory levels, with the largest number of detections and highest concentrations in the glacial drift aquifer. VOC?s generally are not detected in the glacial drift aquifer farther than 1,000 feet from known or potential source areas (industrial or disposal sites), because most source areas are near the Kishwaukee River, where shallow ground water discharges. Across most of the study area, the Glenwood confining unit seems to restrict downward movement of VOC?s into the underlying St. Peter aquifer; in the immediate vicinity of Belvidere, downward movement also seems restricted by lateral movement toward the municipal wells through permeable intervals in the 2 Hydrogeology and Simulation of Ground-Water Flow in the Aquifers Underlying Belvidere, Illinois Galena-Platteville aquifer. Fractures and (or) unused wells that may penetrate the confining unit seem to provide local pathways for limited movement of VOC?s to the sandstone aquifers. At least two municipal wells seem to intercept the bedding-plane partings at about 525 and 485 feet above sea level. Water levels in the lower one-third of the Galena-Platteville aquifer rapidly respond to withdrawals at these wells. The ground-water-flow system underlying Belvidere was simulated to test the conceptual model of the system. The three-dimensional, steady-state model represents the glacial drift, Galena-Platteville, and sandstone aquifers sep

Water-Resources Investigations Report↗
USGS2007

Site Report for USGS Test Holes Drilled at Cape Charles, Northampton County, Virginia, in 2004

The U.S. Geological Survey drilled two test holes near Cape Charles, Virginia, during May and June 2004, as part of an investigation of the buried, late Eocene Chesapeake Bay impact structure. The first hole is designated as the USGS-Sustainable Technology Park test hole #1 (USGS-STP1). This test hole was abandoned at a depth of 300 ft; cuttings samples were collected, but no cores or geophysical logs were acquired. The second hole is designated as the USGS-Sustainable Technology Park test hole #2 (USGS-STP2). This test hole was drilled to a depth of 2,699 ft. Cores were collected between depths of 1,401.7 ft and 1,420.7 ft and between 2,440.0 ft and 2,699.0 ft. Cuttings samples were collected from the uncored intervals below 280-ft depth. Interim sets of geophysical logs were acquired during the drilling operation, and one final set was acquired at the end of drilling. Two wells were installed in the USGS-STP2 test hole. The deep well (designated 62G-24) was screened between 2,260 ft and 2,280 ft, and the shallow well (designated 62G-25) was screened between 1,360 ft and 1,380 ft. Ground-water salinities stabilized at 40 parts per thousand for the deep well and 20 parts per thousand for the shallow well. The geologic section encountered in the test holes consists of three main units: (1) Eocene, Oligocene, Miocene, Pliocene, and Pleistocene sands and clays are present between land surface and a depth of 1,163 ft; (2) sediment-clast breccias of the impact structure are present between depths of 1,163 ft and 2,150 ft; and (3) crystalline-clast breccias and cataclastic gneiss of the impact structure are present between depths of 2,150 ft and 2,699 ft.

Open-File Report↗
USGS2023

Active volcanism on the Arabian Shield—Geology, volcanology, and geophysics of northern Harrat Rahat and vicinity, Kingdom of Saudi Arabia

Active volcanic systems pose serious hazards to people and property including inundation and incineration by lava, blanketing by tephra (volcanic ash), exposure to noxious volcanic gases, and damage from shallow earthquakes triggered by ascending molten material (magma). To improve understanding of volcanism and associated seismicity on the western Arabia Plate, the Saudi Geological Survey and the U.S. Geological Survey conducted a multi-year investigation of the northern Harrat Rahat volcanic field adjacent to the city of Al Madīnah al Munawwarah, Kingdom of Saudi Arabia. Project components included creation of a high-resolution digital topographic base; interpretation of eruptive history supported by detailed geologic mapping, paleomagnetism, and abundant high-precision geochronology of volcanic deposits; assessments of eruptive styles and volcanic hazards by physical volcanology; investigation of the origins of magmas in the mantle and of their differentiation in the crust revealed by chemical and isotopic petrology; gravity and magnetotelluric surveys to reveal crustal structures and to search for magma reservoirs; and regional and local seismic tomography and analyses of seismic hazards. Project results are presented in this Professional Paper as chapters written for technical scientific audiences.

Professional Paper↗
USGS2013

Sediment distribution and hydrologic conditions of the Potomac aquifer in Virginia and parts of Maryland and North Carolina

Sediments of the heavily used Potomac aquifer broadly contrast across major structural features of the Atlantic Coastal Plain Physiographic Province in eastern Virginia and adjacent parts of Maryland and North Carolina. Thicknesses and relative dominance of the highly interbedded fluvial sediments vary regionally. Vertical intervals in boreholes of coarse-grained sediment commonly targeted for completion of water-supply wells are thickest and most widespread across the central and southern parts of the Virginia Coastal Plain. Designated as the Norfolk arch depositional subarea, the entire sediment thickness here functions hydraulically as a single interconnected aquifer. By contrast, coarse-grained sediment intervals are thinner and less widespread across the northern part of the Virginia Coastal Plain and into southern Maryland, designated as the Salisbury embayment depositional subarea. Fine-grained intervals that are generally avoided for completion of water-supply wells are increasingly thick and widespread northward. Fine-grained intervals collectively as thick as several hundred feet comprise two continuous confining units that hydraulically separate three vertically spaced subaquifers. The subaquifers are continuous northward but merge southward into the single undivided Potomac aquifer. Lastly, far southeastern Virginia and northeastern North Carolina are designated as the Albemarle embayment depositional subarea, where both coarse- and fine-grained intervals are of only moderate thickness. The entire sediment thickness functions hydraulically as a single interconnected aquifer. A substantial hydrologic separation from overlying aquifers is imposed by the upper Cenomanian confining unit. Potomac aquifer sediments were deposited by a fluvial depositional complex spanning the Virginia Coastal Plain approximately 100 to 145 million years ago. Westward, persistently uplifted granite and gneiss source rocks sustained a supply of coarse-grained sand and gravel. Immature, high-gradient braided streams deposited longitudinal bars and channel fills across the Norfolk arch subarea. By contrast, across the Salisbury and Albemarle embayment subareas, mature, medium- to low-gradient meandering streams deposited medium- to coarse-grained channel fills and point bars segregated from fine-grained overbank deposits. The Virginia depositional complex merged northward across the Salisbury embayment subarea with another complex in Maryland. Here, additional sediments were received from schist source rocks that underwent three cycles of initial uplift and rapid erosion followed by crustal stability and erosional leveling. Because of the predominance of coarse-grained sediments, transmissivity, hydraulic conductivity, and regional velocities of lateral flow through the Potomac aquifer are greatest across the Norfolk arch depositional subarea, but decrease progressively northward with increasingly fine-grained sediments. Confining units hydraulically separate the Potomac aquifer from overlying aquifers, as indicated by large vertical hydraulic gradients. By contrast, most of the Potomac aquifer internally functions hydraulically as a single interconnected aquifer, as indicated by uniformly small vertical gradients. Most fine-grained sediments within the aquifer do not hydraulically separate overlying and underlying coarse-grained sediments. Across the Salisbury embayment depositional subarea, however, hydraulic separation among the vertically spaced subaquifers is imposed by the intervening confining units. The Potomac aquifer is the largest and most heavily used source of groundwater in the Virginia Coastal Plain. Water-level declines as great as 200 feet create the potential for saltwater intrusion. Conventional stratigraphic correlation has been generally ineffective at accurately characterizing complexly distributed fluvial sediments that compose the Potomac aquifer. Consequently, the aquifer’s internal hydraulic connectivity and overall hydrologic function have not been well understood. Water-supply planning and development efforts have been hampered, and interpretations of regulatory criteria for allowable water-level declines have been ambiguous. An investigation undertaken during 2010–11 by the U.S. Geological Survey, in cooperation with the Virginia Department of Environmental Quality, provides a comprehensive regional description of the spatial distribution of Potomac aquifer sediments and their relation to hydrologic conditions. Altitudes and thicknesses of 2,725 vertical sediment intervals represent the spatial distribution of Potomac aquifer sediments in the Virginia Coastal Plain and adjacent parts of Maryland and North Carolina. Sediment intervals are designated as either dominantly coarse or fine grained and were determined by interpretation of geophysical logs and ancillary information from 456 boreholes. Sediment-interval and borehole summary statistical data indicate regional trends in sediment lithology and stratigraphic continuity, upon which three structurally based and hydrologically distinct sediment depositional subareas are designated. Broad patterns of sediment deposition over time are inferred from published sediment pollen-age data. Discrepancies in previously drawn hydrostratigraphic relations between southeastern Virginia and northeastern North Carolina are partly resolved based on borehole geophysical logs and a recently documented geologic map and corehole. A conceptual model theorizes the depositional history of the sediments and geologically accounts for their distribution. Documented pumping tests of the Potomac aquifer at 197 locations produced 336 values of transmissivity and 127 values of storativity. Based on effective aquifer thicknesses, 296 values of sediment hydraulic conductivity and 113 values of sediment specific storage are calculated. Vertical hydraulic gradients are calculated from 9,479 pairs of water levels measured between November 17, 1953, and October 4, 2011, in 129 closely spaced pairs of wells. Borehole sediment-interval and related data provide a means to achieve high yielding production wells in the Potomac aquifer by site-specific targeting of drilling operations toward water-bearing coarse-grained sand and gravel. Advance knowledge of the potential of different parts of the aquifer also aids in planning optimal groundwater-development areas. Depositional subareas further provide a possible context for resource management. Current (2013) regulatory limits on water-level declines are relative to top surfaces of subdivided upper, middle, and lower Potomac aquifers across the entire Virginia Coastal Plain, but have the potential to exceed the same limit relative to a single undivided Potomac aquifer. By contrast, designation of the sediments as a single aquifer in the Norfolk arch and Albemarle embayment subareas—and as a series of vertically spaced subaquifers and intervening confining units in the Salisbury embayment subarea—best reflects understanding of the Potomac aquifer and can avoid the potential for excessive water-level declines. Simulation modeling to evaluate effects of groundwater withdrawals could be designed similarly, including vertical discretization and (or) zonation of the Potomac aquifer based on depositional subareas and a geostatistical distribution of aquifer properties derived from borehole sediment-interval data. Further resource-management information needs extend beyond the developed part of the Potomac aquifer, particularly across the Northern Neck and Middle Peninsula where only the shallowest part of the aquifer is known, and include structural aspects such as faults, basement bedrock, and the Chesapeake Bay impact crater.

Maryland, North Carolina, Virginia↗
USGS2009

Investigation of coastal hydrogeology utilizing geophysical and geochemical tools along the Broward County coast, Florida

Geophysical (CHIRP, boomer, and continuous direct-current resistivity) and geochemical tracer studies (continuous and time-series 222 Radon) were conducted along the Broward County coast from Port Everglades to Hillsboro Inlet, Florida. Simultaneous seismic, direct-current resistivity, and radon surveys in the coastal waters provided information to characterize the geologic framework and identify potential groundwater-discharge sites. Time-series radon at the Nova Southeastern University National Coral Reef Institute (NSU/NCRI) seawall indicated a very strong tidally modulated discharge of ground water with 222 Rn activities ranging from 4 to 10 disintegrations per minute per liter depending on tidal stage. CHIRP seismic data provided very detailed bottom profiles (i.e., bathymetry); however, acoustic penetration was poor and resulted in no observed subsurface geologic structure. Boomer data, on the other hand, showed features that are indicative of karst, antecedent topography (buried reefs), and sand-filled troughs. Continuous resistivity profiling (CRP) data showed slight variability in the subsurface along the coast. Subtle changes in subsurface resistivity between nearshore (higher values) and offshore (lower values) profiles may indicate either a freshening of subsurface water nearshore or a change in sediment porosity or lithology. Further lithologic and hydrologic controls from sediment or rock cores or well data are needed to constrain the variability in CRP data.

Florida↗
USGS2010

Completion Summary for Well NRF-16 near the Naval Reactors Facility, Idaho National Laboratory, Idaho

In 2009, the U.S. Geological Survey in cooperation with the U.S. Department of Energy's Naval Reactors Laboratory Field Office, Idaho Branch Office cored and completed well NRF-16 for monitoring the eastern Snake River Plain (SRP) aquifer. The borehole was initially cored to a depth of 425 feet below land surface and water samples and geophysical data were collected and analyzed to determine if well NRF-16 would meet criteria requested by Naval Reactors Facility (NRF) for a new upgradient well. Final construction continued after initial water samples and geophysical data indicated that NRF-16 would produce chemical concentrations representative of upgradient aquifer water not influenced by NRF facility disposal, and that the well was capable of producing sustainable discharge for ongoing monitoring. The borehole was reamed and constructed as a Comprehensive Environmental Response Compensation and Liability Act monitoring well complete with screen and dedicated pump. Geophysical and borehole video logs were collected after coring and final completion of the monitoring well. Geophysical logs were examined in conjunction with the borehole core to identify primary flow paths for groundwater, which are believed to occur in the intervals of fractured and vesicular basalt and to describe borehole lithology in detail. Geophysical data also were examined to look for evidence of perched water and the extent of the annular seal after cement grouting the casing in place. Borehole videos were collected to confirm that no perched water was present and to examine the borehole before and after setting the screen in well NRF-16. Two consecutive single-well aquifer tests to define hydraulic characteristics for well NRF-16 were conducted in the eastern SRP aquifer. Transmissivity and hydraulic conductivity averaged from the aquifer tests were 4.8 x 103 ft2/d and 9.9 ft/d, respectively. The transmissivity for well NRF-16 was within the range of values determined from past aquifer tests in other wells near NRF of 4.4 x 102 to 5.1 x 105 ft2/d. Water samples were analyzed for metals, nutrients, total organic carbon, volatile organic compounds, semi-volatile organic compounds, herbicides, pesticides, polychlorinated biphenols, and radionuclides. All chloride, nitrate, and sulfate concentrations were less than background concentrations for the eastern SRP aquifer north of the NRF. Concentrations in water samples for most of the organic compounds and radionuclides were less than the reporting limits and reporting levels.

Scientific Investigations Report↗
USGS2021

Conceptual and numerical groundwater flow model of the Cedar River alluvial aquifer system with simulation of drought stress on groundwater availability near Cedar Rapids, Iowa, for 2011 through 2013

Between July 2011 and February 2013, the City of Cedar Rapids observed water level declines in their horizontal collector wells approaching 11 meters. As a result, pumping from these production wells had to be halted, and questions were raised about the reliability of the alluvial aquifer under future drought conditions. The U.S. Geological Survey, in cooperation with the City of Cedar Rapids, completed a study to better understand the effects of drought stress on the Cedar River alluvial aquifer using a numerical groundwater flow model. Previously published groundwater flow models were combined with newly collected airborne, waterborne, down-hole, and land-based geophysical survey data and provided a detailed three-dimensional lithologic model of the Cedar River alluvial aquifer and surrounding area. An improved conceptual model for the groundwater flow system and a lithologic model were used to build and inform a numerical groundwater flow model capable of simulating water levels observed in the City of Cedar Rapids horizontal collector wells during the 2012 drought. Model performance was assessed primarily on the ability of the model to simulate water table elevation at six monitoring wells. Statistical tests were used to assess the numerical model during the calibration period, and results varied from satisfactory to unsatisfactory, likely because of stage changes in the Cedar River and production well withdrawal rates near monitoring wells. Simulated water levels during the 2012 drought indicated a depression near the horizontal collector wells, although simulated elevations at these locations and at monitoring wells were generally overestimated compared to measured values. The numerical groundwater flow model was modified to account for a decrease in seepage rate caused by low flow in the Cedar River and increased production. With seepage rate modification, model results improved; the simulated water table elevations were like those observed in horizontal collector and monitoring wells. Results demonstrated the ability of the model to simulate water levels observed in the horizontal collector wells during the 2012 drought when accounting for a decrease in infiltration from the Cedar River.

Iowa↗