USGS Science⌕ Search

SEARCH · USGS Science

Results for “Frontiers in Enviornmental Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,605 records · Page 65Linked to original sources
USGS1977

Summary of results from electromagnetic and galvanic soundings on Kilauea Iki lava lake, Hawaii

The purpose of this report is to summarize various electrical sounding studies made on the Kilauea Iki lava lake and to present some of the preliminary interpretations that resulted from the measurements. The following discussion is not intended as a complete interpretation, but is intended to summarize the major points made in an invited oral presentation at the American Geophysical Union fall meeting held in San Francisco, Calif. on December 6, 1976. This paper was part of a group of papers dealing with various geophysical studies recently made on the Kilauea Iki lava lake. A general plan map of Kilauea Iki lava lake is shown in figure 1. Electromagnetic (EM) loop-loop soundings, D.C. resistivity soundings, and VLF apparent resistivity measurements were made on the lave lake surface. All of these surveys were made to determine the geoelectric structure of the lava lake and to determine parameters of the molten basaltic lens that exist in the partially solidified lava lake.

Hawaii↗
USGS2024

Prediction of regional broadband strong ground motions using a teleseismic source model of the 18 April 2014 Mw 7.3 Papanoa, Mexico, earthquake

To estimate predicted ground motion from a teleseismic slip model, we use a low‐ and high‐frequency hybrid method to simulate the regional, strong ground motions observed following the 18 April 2014 moment magnitude ( ⁠M w ⁠ ) 7.3 Papanoa, Mexico, earthquake. To generate the regional ground motion at low frequencies (<1 Hz), a teleseismically derived, finite‐fault, kinematic model is used to define the earthquake source, taking into account slip‐model variations identified with a parameter sampling approach that considers possible errors in the fault geometry, the hypocenter depth, and the rupture velocity. A 3D crustal model is used to calculate the low‐frequency ground motions using a finite‐element calculation that includes topography and considers variations in the source model to estimate the uncertainty in the calculations. High frequencies (>1 Hz) are added using a 1D full‐wave propagation code that estimates uncertainties by considering multiple random distributions of slip with different spatial correlation lengths. The synthetic, broadband (0.05–10.0 Hz) ground motions are obtained by combining the low‐ and high‐frequency portions match filtered at 1 Hz. These synthetic ground motions are compared with the regional observations using velocity records, peak ground acceleration, and medians of the orientation‐independent response spectra of the horizontal components (RotD50) calculated at periods of 0.2, 0.3, 0.5, 1.0, 2.0, 3.0, 5.0, 7.5, and 10.0 s. The results indicate that ground motions estimated at these periods using our hybrid approach based primarily on a teleseismically derived source model are comparable to the values observed for the 2014 Papanoa earthquake at regional distances. The approach could be used to estimate strong‐motion spectral levels expected for regions with limited local and regional recordings and could also fill in magnitude or distance gaps in ground‐motion prediction relations utilized in the assessment of seismic hazard.

Papanoa↗
USGS2026

Constraining source and path effects of large magnitude earthquakes using ground motion simulations

The purpose of this study is to use ground‐motion simulations to investigate ways in which source and path effects for large‐magnitude earthquakes can be represented in nonergodic ground‐motion models (GMMs). To achieve this, we designed a ground‐motion study in the San Francisco Bay Area that includes earthquakes with a broad range of magnitudes distributed uniformly on a fault plane, and sites covering a large range of rupture distances and azimuths. After running a large suite of kinematic simulations (magnitude 4–7), we then develop a nonergodic GMM with the simulated data. We find that trends in the within‐site residuals are affected significantly by the earthquake radiation pattern, rupture directivity, and slip patterns. Next, we modify an existing rupture directivity model to fit and remove the observed radiation pattern and rupture directivity from the residuals. We also minimize the contributions of slip patterns by averaging the within‐site residuals among multiple source realizations. Finally, after removing the source effects from the within‐site residuals, we compare the path effects computed with different magnitude groups using two approaches. The first approach only considers the small events that have the same shortest path to a site as the large events, whereas the second approach considers all small events on the fault plane. The results indicate that it is difficult to satisfactorily approximate the path effects of large events with those of small events using either approach, at least in the case of simulations.

California↗
USGS2026

Rapid hydrothermal triggering of induced seismicity at the Coso Geothermal Field

The long-term producing Coso Geothermal Field (CGF) in California operates over 100 wells tapping into a reservoir characterized by an extensive fracture network, complex fluid pathways, and regular seismic activity. Understanding the interaction between seismicity and injection can shed important light on the hydrothermal characteristics of the field. Here, we analyze 15 years of local seismic and daily operational data from the CGF, identifying a strong correlation between short-term increase in seismicity rate and seasonal volumetric and temperature variations in the reinjected fluid. Furthermore, the seismic footprint during peak injection of colder fluids reveals a near-instantaneous response up to 2 km away from the injection well, too rapid for pore pressure diffusion alone. This short-term and distant response is observed to have directional preference, indicating structural or permeability anisotropy within the reservoir. Additionally, the seismic response correlates with the initial volumetric increase of colder fluids, but also with temperature decrease during stable injection periods, suggesting thermal effects alone can play an important role in triggering distant seismicity.

California↗
USGS2024

Three-dimensional hydrogeologic framework model of the Russian River watershed, California

The Russian River watershed is in northern Sonoma County and southern Mendocino County, California, in the northern part of the California Coast Ranges. The Russian River serves as a supply for agricultural irrigation and for municipal, domestic, and commercial uses. Through a cooperative agreement with the California State Water Resources Control Board and Sonoma County Water Agency, the U.S. Geological Survey has completed studies to better understand the hydrogeologic system and develop numerical hydrologic modeling tools to evaluate and aid in managing groundwater resources. This report focuses on the development of a digital three-dimensional hydrogeologic framework model of the Russian River watershed for use in groundwater resource assessment and numerical models. The digital three-dimensional hydrogeologic framework model of the Russian River watershed portrays the altitude, thickness, and extent of five hydrogeologic units. These five hydrogeologic units include (1) a basement unit, (2) the Sonoma Volcanics, (3) a consolidated sedimentary rock unit, (4) an unconsolidated sediment unit, and (5) channel alluvium. Model input data were compiled from published geologic maps, interpreted well data, and a model of the top of basement derived from gravity data. These data were used to construct surfaces that represent the upper and lower subsurface boundaries of each hydrogeologic unit. Top surfaces were created for the five hydrogeologic units and then stacked in three dimensions to create a solid-volume digital model. The digital three-dimensional hydrogeologic framework model described in this report and the corresponding data represent the generalized geometry of the subsurface geologic units; the model reproduces the input geologic data with reasonable accuracy and is consistent with previously published subsurface conceptualizations of the region. The model indicates the overall geometry of the basement within the watershed and the spatial extent, altitude, and thickness of the basin-filling units. The hydrogeologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

California↗
USGS2024

Managing basin-scale carbon sequestration: A tragedy of the commons approach

The Tragedy of the Commons is a well studied problem in the literature of ecology, economics, and environmental policy which illustrates the deleterious consequences of managing common pool resources when individual and social incentives are misaligned. In this work, we apply a simple model of carbon sequestration in a deep saline aquifer by two neighboring geologic CO 2 storage (GCS) operators to begin investigating if a Tragedy of the Commons framework applies to GCS. Specifically, we consider the pressure space as a “commons” because the injection by each firm at its own well increases the downhole injection pressure at both wells. We assume that a firm will decrease its injection rate if the downhole pressure at its well exceeds a predefined maximum (i.e., exceeds the “pressure limit”). With this assumption in place, we find that the same injection flowrates are optimal for both wells, regardless of whether they are owned by the same firm or competing firms. This suggests that GCS may not be best represented by a pure Tragedy of the Commons framework under our initial assumptions. However, there could be economic incentives or contractual obligations that may result in either or both GCS operators being unwilling to reduce their injection rates. Thus, we conclude the conference paper with a discussion of future extensions of our approach that may demonstrate closer alignment with the Tragedy of the Commons, including explicit definitions of pore-space rights, firm uncertainty regarding the parameters of the Theis equation, and the potential role of unitization.

Conference Paper↗
USGS2024

Three-dimensional geologic framework model of the Rio San Jose groundwater basin and adjacent areas, New Mexico

As part of a U.S. Geological Survey study in cooperation with the Bureau of Reclamation and the Pueblo of Acoma, New Mexico, and the Pueblo of Laguna, New Mexico, a digital three-dimensional geologic framework model was constructed for the Rio San Jose and its surface-water drainage basin in west-central New Mexico. This three-dimensional model defines the altitude, thickness, and extent of 18 geologic units for use in a regional numerical hydrologic model. The model included an undifferentiated Proterozoic basement layer, 13 consolidated Paleozoic and Mesozoic rock units, and 4 Cenozoic units. Model input data were compiled from published cross sections, well data, structure contour maps, selected geophysical data, and data derived from geologic maps and structural features in the study area. These data were used to construct faulted surfaces that represent the upper and lower subsurface geologic unit boundaries. The digital three-dimensional geologic framework model combines faults, the altitude of the tops of each geologic unit, and boundary lines depicting the subsurface extent of each geologic unit. The digital three-dimensional geologic model described in this report and the corresponding data release represents the generalized geometry of the subsurface geologic units; it reproduces with reasonable accuracy the input geologic data and is consistent with previously published subsurface conceptualizations of the region. The geologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

New Mexico↗
USGS2025

Statistical approaches for modeling correlated grade and tonnage distributions and applications for mineral resource assessments

Correlations between grade and tonnage exist in mineral resource data compiled from published reports, but they are not always addressed during quantitative assessment of undiscovered mineral resources. Failure to account for correlated grade and tonnage distributions can result in geologically unrealistic assessment results. Current software tools simulate univariate ore tonnage and multivariate resource grades of undiscovered deposits independently. As a result, analysts are forced to rely on ad-hoc solutions to minimize the correlation issues by: 1) creating subsets of data with restricted criteria; 2) truncating grade and tonnage distributions; and 3) testing model robustness using exploratory data analysis. While these methods represent pragmatic solutions, the statistical solutions presented here provide additional options to address real correlations in grade and tonnage data used for mineral resource assessments. We present a modified version of the MapMark4 package in R that introduces two alternatives for modeling grade and tonnage distributions, consisting of a multivariate solution that accounts for correlations between ore tonnage and metal grades and an empirical solution that utilizes simple random sampling with replacement to reproduce coupled grades and tonnages from the input data. We present simulations for contained ore and metal for three case studies representing tungsten skarn, komatiite-hosted nickel, and sediment-hosted carbonate amagmatic zinc-lead (Mississippi Valley-type) deposits. Employing the methods presented here yields quantitative mineral resource assessment results that more closely reflect the empirical distributions of grades and tonnages observed in nature and expands the applicability of these tools for ongoing critical mineral resource assessments.

Applied Computing and Geosciences↗
USGS2026

Seasonal migrations and other movements

In the past 25 years new information has been obtained on the migrations and movements of mountain sheep (bighorn [Ovis canadensis], thinhorn [Ovis dalli]). This chapter provides a comprehensive overview of mountain sheep migration and other movements across their broad distribution in western North America. Across the range of mountain sheep, migrations and other seasonal movements define a complex movement portfolio that relates to and supports all aspects of mountain sheep ecology. Bighorn and thinhorn species have examples of migratory behaviors that span the continuum between annual residents and long-distance migrants. Migratory behaviors can be characterized as low- or high-elevation residents; elevational migrations and other variants; and geographic migrants. Native populations that have been extant on the landscape without notable human intervention have greater migratory propensity and more diverse migratory portfolios due to the maintenance of migration through cultural learning and social transmission. Restored and augmented populations, where the population-level knowledge of migration has been lost or greatly reduced, are largely nonmigratory, although translocations show some ability to restore short-distance elevational migrations. Seasonal spring and fall migrations are less common in desert bighorn sheep (O. canadensis spp.) or bighorn sheep living in canyon or prairie breaks landscapes. Mineral lick visitation is important and common across the range of mountain sheep. Managing for migratory diversity can help to sustain migratory behavior in the face of climate change and other anthropogenic pressures, which can limit landscape connectivity between seasonal ranges or alter the spatiotemporal dynamics of regional phenology with cascading effects to other biotic and abiotic interactions such as the need to balance forage and predation risk or the spatial refugia with increased temperatures.

Book chapter↗
USGS2026

A Lake Charr pangenome reveals highly conserved Ohnologs as drivers of phenotypic diversity

Whole-genome duplication (WGD) is hypothesized to spur evolutionary diversification by producing genome-wide duplicate gene sets (Ohnologs) that are initially functionally redundant but can diverge markedly as the effects of relaxed selection accumulate over time. However, the underlying mechanisms remain unclear, in part because genomic studies often reconstruct Ohnolog evolution over millions of years, during which subsequent mutations can obscure deep-time signals. Investigating the relationship between Ohnolog evolution and diversification on a contemporary timescale offers clearer insights. We explore this relationship in Lake Charr ( Salvelinus namaycush ), where ∼10% of genes are retained highly conserved polyploid duplicates following the Salmonid-Specific Fourth Round WGD. Using 31 chromosome-level assemblies of Lake Charr from morphologically and ecologically diverse populations, joined into a pangenome graph, we characterized 189,555 structural variants (SVs) that were significantly less likely to affect genes retained as sequence-conserved Ohnolog pairs, nuancing the hypothesis that gene redundancy, relaxed selection, and functional diversification are intertwined. However, we found that SVs affecting such conserved Ohnologs may be potent drivers of adaptive evolution. Notably, we identified a putative 938-Kb interchromosomal translocation containing 25 genes with highly conserved Ohnologs in a paralogous (but untranslocated) genomic block. This putative translocation appears to have facilitated Ohnolog divergence in ankrd11 and hp , genes putatively linked to craniofacial and lipid metabolic diversity in sympatric Lake Superior morphs. This research reveals that conserved Ohnologs previously presumed to be redundant remain a reservoir for adaptive change.

BioRxiv↗
USGS2025

The National Map Corps—Federal Emergency Management Agency and Oak Ridge National Laboratory pilot project report

This report provides an overview of the U.S. Geological Survey National Map Corps —Federal Emergency Management Agency and Oak Ridge National Laboratory pilot project in St. James Parish, Louisiana, that began in February 2024 and ended at the end of March 2024. The project used the power of The National Map Corps’ volunteer community to improve building classifications in the original Federal Emergency Management Agency’s U.S.A. Structures dataset. The report highlights the project’s completion and details the work and results achieved through a collaborative effort to enhance geospatial data quality and utility.

Open-File Report↗
USGS2024

Near-real-time earthquake-induced fatality estimation using crowdsourced data and few-shot large-language models

When a damaging earthquake occurs, immediate information about casualties (e.g., fatalities and injuries) is critical for time-sensitive decision-making by emergency response and aid agencies in the first hours and days. Systems such as the Prompt Assessment of Global Earthquakes for Response (PAGER) by the U.S. Geological Survey (USGS) were developed to provide a forecast of such impacts within about 30 min of any significant earthquake globally. However, existing disaster-induced human loss estimation systems often rely on early casualty reports manually retrieved from global traditional media, which are labor-intensive, time-consuming, and have significant time latencies. Recent approaches use keyword matching and topic modeling to identify human casualty-relevant information from social media but tend to be error-prone when dealing with complex semantics in multi-lingual text data and parsing dynamically changing and conflicting human death and injury numbers shared by various unvetted sources in social media platforms. In this work, we introduce an end-to-end framework to significantly improve the timeliness and accuracy of global earthquake-induced human loss forecasting using multi-lingual, crowdsourced social media. Our framework integrates (i) a hierarchical casualty extraction model built upon large language models, prompt design, and few-shot learning to retrieve quantitative human loss claims from social media, (ii) a physical constraint-aware, dynamic-truth discovery model that discovers the truthful human loss from massive noisy and potentially conflicting human loss claims, and (iii) a Bayesian updating loss projection model that dynamically updates the final loss estimation using discovered truths. We test the framework in real-time on a series of global earthquake events in 2021 and 2022 and show that our framework effectively automates the retrieval of casualty information faster but with comparable accuracy to those now retrieved manually by the USGS. The code associated with this work is made available at: https://github.com/SusuXu-s-Lab/Hierarchical-Earthquake-Casualty-Information-Retrieval

International Journal of Disaster Risk Reduction↗
USGS2024

Assessment of fresh groundwater discharge and saline surface-water intrusion at Operable Unit 2, North Chevalier Field Disposal Area (Site 11), Naval Air Station Pensacola, Florida, 2018–22

Site 11 is a former landfill at North Chevalier Field Disposal Area in Operable Unit 2 at Naval Air Station Pensacola, in northwest Florida. Site 11 is adjacent to Bayou Grande, a shallow, tidally influenced, saline estuary of the Pensacola Bay watershed. Federal and Florida regulators have expressed concern that contaminants detected in groundwater beneath the inland parts of Site 11 may discharge to Bayou Grande. In 2017, the Department of Defense, U.S. Navy, Naval Facilities Engineering Systems Command Southeast asked the U.S. Geological Survey to assess the occurrence of fresh groundwater discharge to Bayou Grande at Site 11 and to delineate to the extent practicable the location of groundwater discharge. Between 2018 and 2022, the U.S. Geological Survey used a multiple-lines-of-evidence approach that included a visual method and three physical methods based on the temperature difference between groundwater and surface water to assess groundwater discharge. One of the physically based methods also used the difference in specific conductance between fresh groundwater and brackish to saline surface water. Combined, the data indicate that fresh groundwater from across Site 11 discharges primarily along the shoreline of the northern and northeastern part of Site 11. The data also indicate that saline surface water from Bayou Grande intrudes tens of feet into the shallow aquifer beneath Site 11. The combined data indicate that the interface between fresh groundwater and saline surface water changes over space and time. Any new monitoring wells proposed for installation near the shoreline of Site 11 should include approaches to monitor the changes in the location of the freshwater/saltwater interface. Care would need to be taken to collect any groundwater samples at the correct season and tidal period to provide the highest probability of collecting a representative sample of Site 11 groundwater unaffected by saltwater.

Florida↗
USGS2024

Trimming the UCERF3-TD logic tree: Model order reduction for an earthquake rupture forecast considering loss exceedance

The Uniform California Earthquake Rupture Forecast version 3-Time Dependent depicts California’s seismic faults and their activity. Its logic tree has 5760 leaves. Considering 30 more model combinations related to ground motion produces 172,800 distinct models representing so-called epistemic uncertainties. To calculate risk to a portfolio of buildings, one also considers millions of earthquakes and spatially correlated ground-motion variability. We offer a tree-trimming technique that retains the probability distribution of portfolio loss and identifies the leading sources of uncertainty for further study. We applied it to a California statewide building portfolio and various levels of nonexceedance probability between one in 100 and one in 2500. We trimmed the logic tree from 172,800 leaves to as few as 15. The result: a supercomputer that would otherwise run 24 h to estimate the distribution of one-in-250-year loss can calculate it in moments with the reduced-order model. Others can use the reduced-order model to calculate risk to different California portfolios, and scientists can prioritize study to reduce the remaining epistemic uncertainty.

Earthquake Spectra↗
USGS2024

Metal mobilization from thawing permafrost to aquatic ecosystems is driving rusting of Arctic streams

Climate change in the Arctic is altering watershed hydrologic processes and biogeochemistry. Here, we present an emergent threat to Arctic watersheds based on observations from 75 streams in Alaska’s Brooks Range that recently turned orange, reflecting increased loading of iron and toxic metals. Using remote sensing, we constrain the timing of stream discoloration to the last 10 years, a period of rapid warming and snowfall, suggesting impairment is likely due to permafrost thaw. Thawing permafrost can foster chemical weathering of minerals, microbial reduction of soil iron, and groundwater transport of metals to streams. Compared to clear reference streams, orange streams have lower pH, higher turbidity, and higher sulfate, iron, and trace metal concentrations, supporting sulfide mineral weathering as a primary mobilization process. Stream discoloration was associated with dramatic declines in macroinvertebrate diversity and fish abundance. These findings have considerable implications for drinking water supplies and subsistence fisheries in rural Alaska.

Alaska↗
USGS2025

Comparison of creek and bay influences on salt marsh sediment budget and deposition patterns

The resilience of salt marshes with low organic production depends on their effective capture and retention of mineral sediment from adjacent waters. Little prior work has directly compared mechanisms of sediment import from wave-influenced marsh boundaries against those of tidal creeks. We used simultaneous deployment of net-deposition tiles and oceanographic sensors to identify the timing and magnitude of sediment import/export to, and redistribution within, a marsh in south San Francisco Bay. As the marsh has both an eroding bay-exposed scarp and a prominent tidal creek, we investigated the mechanisms and magnitudes of sediment import from the marsh-bay versus the marsh-creek interface. The strong daily sea breezes of the summer season produced most of the wave-driven erosion of the marsh scarp and controlled suspended sediment concentrations; the winter season had weaker winds punctuated by a few storms. A large seasonal difference in suspended sediment concentrations influenced both flood and ebb sediment fluxes to the marsh and led to much higher rates of import in the summer. Both bay-side and creek-side processes were important to total marsh sediment budget. Bay-side sediment contributions were more variable in time due to the bay-influenced environment, and creek-side contributions were overall larger, reflecting the large proportion of the marsh fed by creek water. Sediment was redistributed throughout the system, with erosion near the bay-edge, accretion near the creek-edge and slow import to the marsh interior. The marsh was net importing sediment in the summer and exporting in the winter from different rates of these processes; on an annual scale, the marsh was net importing despite rapid lateral marsh loss. These findings emphasize that a positive sediment budget does not imply a stable marsh and that both creek- and edge-side dynamics are important for marsh sedimentation and geomorphic trajectories. Further, we expand understandings of non-storm and seasonal controls on marsh sedimentation.

California↗
USGS2023

A comprehensive fault system inversion approach: Methods and application to NSHM23

We present updated inversion‐based fault‐system solutions for the 2023 update to the National Seismic Hazard Model (NSHM23), standardizing earthquake rate model calculations on crustal faults across the western United States. We build upon the inversion methodology used in the Third Uniform California Earthquake Rupture Forecast (UCERF3) to solve for time‐independent rates of earthquakes in an interconnected fault system. The updated model explicitly maps out a wide range of fault recurrence and segmentation behavior (epistemic uncertainty), more completely exploring the solution space of viable models beyond those of UCERF3. We also improve the simulated annealing implementation, greatly increasing computational efficiency (and thus inversion convergence), and introduce an adaptive constraint weight calculation algorithm that helps to mediate between competing constraints. Hazard calculations show that ingredient changes (especially fault and deformation models) are the primary driver of hazard changes between NSHM23 and UCERF3. Updates to the inversion methodology are also consequential near faults in which the slip rate in UCERF3 was poorly fit or was satisfied primarily using large multifault ruptures that are now restricted by explicit b ‐value and segmentation constraints.

Bulletin of the Seismological Society of America↗
USGS2025

Revisiting an enigma on California's north coast: The Mw6.5 Fickle Hill earthquake of 21 December 1954

Many earthquakes occur along the North Coast of California in the vicinity of the Mendocino Triple Junction (MTJ), where the Pacific, Gorda, and North American (NA) plates meet, and on the adjacent plate boundaries. The MTJ marks the nexus of the Mendocino and San Andreas faults with the Cascadia subduction zone (CSZ). Historically, most large earthquakes around the MTJ have been within the offshore Gorda plate and its subducted portion beneath the NA plate. North of the MTJ, active faults mapped in the NA plate are part of the CSZ fold‐and‐thrust belt. Although some events have been detected in the NA plate, no large historic events have been associated with mapped surface faults. The 21 December 1954 M w 6.5 earthquake in Humboldt County is one possible exception. Using published data from catalogs and articles, unpublished data from Berkeley’s archives, and S ‐ P times interpreted from two U.S. Coast and Geodetic Survey (USCGS) accelerometers, we determine a probability cloud for the earthquake’s hypocenter using NonLinLoc. The highest probability location lies beneath Fickle Hill just east of the city of Arcata, California, at 40.87° N, 124.03° W, and ∼11 km depth. Using P ‐wave polarities from Berkeley stations and the digitized waveforms from the accelerometers, we find that the focal mechanism most consistent with the data indicates thrust movement with strike, dip, and rake of 350°, 10°, and 90°, respectively, at a depth of 14 km. Given the depth uncertainties of both this event and the megathrust, this implies that the earthquake most likely took place on the subduction interface rather than on the mapped faults in the Mad River fault zone that trend 322° and dip to the northeast. The revisited intensity in the epicentral region also supports a location beneath Fickle Hill to the east of the city of Arcata, California.

California, Idaho, Nevada, Oregon, Washington↗