USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Science and Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 65Linked to original sources
USGS2024

Framework for implementing damping scaling factors in U.S. Geological Survey National Seismic Hazard Models

Traditionally, probabilistic seismic hazard analysis (PSHA) has focused on calculating ground motion hazard curves for elastic, 5%-damped pseudo spectral accelerations, Sa(T,5%), which are used as the basis for engineering design parameters and targets for ground motion selection and modification. However, structures and geotechnical systems can exhibit a wide range of damping ratios both above and below the 5% level, depending on the construction material, structural system, nonstructural elements, or subsurface soil properties. When spectral parameters at such damping levels are required for certain applications, 5%-damped accelerations have traditionally been extracted from PSHA-based hazard curves and adjusted outside of the hazard integral using damping scaling factors (DSF) such as those from Newmark & Hall (1982). Recent advances in the development of more rigorous and comprehensive damping scaling models (e.g., Rezaeian et al., 2014; Rezaeian et al., 2021) have allowed for the modeling of means and standard deviations of DSFs as functions of earthquake source and path properties for crustal, intraslab, and subduction interface tectonic environments. These DSF models can be applied to ground motion model (GMM) estimates of Sa(T,5%) for a given earthquake rupture scenario to produce a corresponding mean and standard deviation Sa at a specified damping ratio β, Sa(T,β). In this study, the DSF models of Rezaeian et al. (2014) and Rezaeian et al. (2021) are implemented within the U.S. Geological Survey National Seismic Hazard Model (NSHM) PSHA framework to calculate probabilistic hazard curves for spectral accelerations at damping ratios from 0.5% to 30%. The DSF models are applied directly to the mean and standard deviation of Sa(T,5%) predictions from each GMM in the NSHM logic tree. Resulting hazard curves and uniform hazard and risk spectra for Sa(T,β) are presented for several geographic locations and compared with corresponding spectra estimated using current design practices by applying the same DSFs outside of the PSHA calculation. Key differences between the two methods for estimating Sa(T,β) are discussed, and potential strategies are presented for the implementation and usage of the hazard-consistent Sa(T,β) in building codes. Comparing the results to those from DSFs used in current design practices that are mainly based on Newmark & Hall (1982) is not explored in this study.

Conference Paper↗
USGS2025

No evidence for an active margin-spanning megasplay fault at the Cascadia Subduction Zone

It has been previously proposed that a megasplay fault within the Cascadia accretionary wedge, spanning from offshore Vancouver Island to Oregon, has the potential to slip during a future Cascadia subduction zone earthquake. This hypothetical fault has major implications for tsunami size and arrival times and is included in disaster-planning scenarios currently in use in the region. This hypothesis is evaluated in this study using CASIE21 deep-penetrating and U.S. Geological Survey high-resolution seismic reflection profiles. We map changes in wedge structural style and seismic character to identify the inner-outer wedge transition zone where a megasplay fault has been previously hypothesized to exist and evaluate evidence for active faulting within this zone. Our results indicate that there is not an active, through-going megasplay fault in Cascadia, but instead, the structure and activity of faulting at the inner-outer wedge transition zone is highly variable and segmented along strike, consistent with the segmentation of other physical and mechanical properties in Cascadia. Wedge sedimentation, plate dip, and subducting topography are proposed to play a major role in controlling megasplay fault development and evolution. Incorporating updated megasplay fault location, geometry, and activity into modeling of Cascadia earthquakes and tsunamis could help better constrain associated hazards.

British Columbia, Oregon, Washington↗
USGS1986

Regionalization of low-flow characteristics of Tennessee streams

Procedures for estimating 3-day 2-year, 3-day 10-year, 3-day 20-year, and 7-day 10-year low flows at ungaged stream sites in Tennessee are based on surface geology and drainage area size. One set of equations applies to west Tennessee streams, and another set applies to central and east Tennessee streams. The equations do not apply to streams where flow is significantly altered by activities of man. Standard errors of estimate of equations for west Tennessee are 24 to 32% and for central and east Tennessee 31 to 35%. Streamflow recession indexes, in days/log cycle, are used to account for effects of geology of the drainage basin on low flow of streams. The indexes in Tennessee range from 32 days/log cycle for clay and shale to 350 days/log cycle for gravel and sand, indicating different aquifer characteristics of the geologic units that sustain streamflows during periods of no surface runoff. Streamflow recession rate depends primarily on transmissivity and storage characteristics of the aquifers, and the average distance from stream channels to basin divides. Geology and drainage basin size are the most significant variables affecting low flow in Tennessee streams according to regression analyses. (Author 's abstract)

Tennessee↗
USGS2025

Zircon as a pathfinder to REE mineralization

Carbonatites and alkaline silicate rocks are major primary sources of the rare earth elements (REE) and other critical metals, such as Nb. Despite the economic significance of these rocks, their formation and the processes of REE enrichment are poorly understood. Here, statistical analysis of a global dataset demonstrates that zircon geochemistry is a powerful recorder of REE metallogenesis and a potential pathfinder for REE deposits. Zircons from REE and Nb fertile intrusions lack Eu anomalies and have elevated Gd/Yb and Th/Yb, indicating they crystallised from magmas that originated from deep, oxidised and enriched mantle sources. Complexes with Nb enrichment have low U/Nb, reflecting an enriched mantle source, whereas high U/Nb in REE-only fertile intrusions suggest a subduction-metasomatised mantle source. Machine learning models demonstrate high accuracy in classifying zircon from barren and fertile deposits. Classification of detrital zircons shows that REE-enriched deposits correlate with supercontinent assembly, whereas Nb fertile complexes are associated with supercontinent breakup. This approach offers a new, mineral to global scale, petrologic and exploration tool that enhances understanding of REE metallogenesis.

Geochemical Perspectives Letters↗
USGS2024

Seismic response comparison of a historical masonry church subject to real and simulated ground motions

In recent years, advanced numerical models and high-performance computing have facilitated the utilization of ground motion time series in the assessment of the non-linear dynamic behavior of historic masonry structures. Since recorded accelerograms can be sparse for specific analysis conditions, stochastic ground motion simulations have become a viable alternative to overcome this limitation. This study simulates the recorded acceleration time series of the Central Italy 2016 earthquake event at the closest station to the town of Macerata using a site-based stochastic approach. The simulated motions are seismologically evaluated using a goodness-of-fit method in terms of various intensity measures. The simulated records, in conjunction with real records, are used to study the non-linear dynamic behavior of San Filippo Neri church located in Macerata. The church of San Filippo represents an important example of Baroque religious architecture in central Italy, which was damaged and closed off to the public after the 2016 earthquake events. The construction was investigated with a vast diagnostic campaign which included on-site testing and dynamic identification tests. The collected data is used to calibrate the dynamic response of a three-dimensional finite element model of the church. The model is finally used to compare the non-linear seismic responses under real and simulated ground motions with the site recorded damage. The results of structural responses demonstrate a strong agreement between the real and simulated records, providing evidence to support the validation of the site-based stochastic simulation.

Macerata↗
USGS2025

International data gaps at the Center for Engineering Strong Motion Data

The Center for Engineering Strong Motion Data (CESMD) is utilized by seismologists, engineers, and disaster management professionals in the US and has historically achieved and distributed waveforms from across the globe for significant earthquakes. The increased access to the waveforms via Web API (Application Programming Interface) offers a unique opportunity to provide the community complete datasets, sampling a variety of tectonic environments and geologic conditions, increasing the number of available ground motion records for use in ground motion models (GMMs) and improving the accuracy of earthquake engineering evaluations. The objective of this study is to programmatically identify gaps in global event data from the past decade and backfill missing data gaps at CESMD. We first compare the CESMD catalog with the Advanced National Seismic System (ANSS) Comprehensive Earthquake Catalog identifying regions and time periods where strong-motion data is limited or inadequate. To backfill datasets at CESMD for significant events, we pinpoint regions and time intervals that lack information, creating a list of events for which we’d like to obtain data. An important facet of this work is identifying the source of data and metadata across earthquake repositories around the world and integrating these data repositories into our current strong-motion data processing workflow. In parallel with these newly processed datasets, we are developing a script to produce data origination citations to include provenance and attribution information to associate with respective datasets at CESMD. We showcase our methodology for identifying and filling data gaps at CESMD using three case studies (the 2018 Anchorage Alaska earthquake sequence, seismicity associated with the 2018 Hawaiian Kilauea volcano eruption, and several earthquakes in Turkey) and then outline our strategy to apply our data gap backfilling methods on an international scale.

Conference Paper↗
USGS2026

Software to support remote sensing of river discharge based on critical flow theory

Water resource management requires accurate observations of streamflow but standard field methods for measuring river discharge ( Q ) are costly and can be hazardous for equipment and personnel. Remote sensing has become a viable alternative, but many image-based techniques require field data for calibration and depth and velocity can seldom be mapped with a single sensor. A new approach based on critical flow theory, in contrast, allows both of these attributes to be inferred from readily available image data. This technique only pertains to sites with standing waves, called undular hydraulic jumps (UHJs), but a recent investigation demonstrated its potential to provide accurate discharge estimates. This paper introduces software designed to facilitate Inferring Q from UHJs Identified in River Images (InQUIRI). The package includes modules for retrieving data from image servers, making the measurements of wavelength and width required to calculate discharge, inferring a representative wavelength from a profile digitized along a wave train, combining multiple estimates to obtain an ensemble median discharge, and assessing accuracy via comparison to gage records from the U.S. Geological Survey. By making these steps easier to implement, InQUIRI enables users to apply the workflow to a variety of UHJ-containing images. Accumulating more case studies, some successful and others less so, would help constrain the range of applicability of the critical flow approach and foster development of refined guidelines for selecting and measuring waves. The software described herein could play an important role in promoting informed use of this new technique for non-contact streamflow measurement.

Arizona, Colorado, New Mexico, Utah↗
USGS2024

Mapping the resistivity structure of Walker Ridge 313 in the Gulf of Mexico using the marine CSEM method

A marine controlled source electromagnetic (CSEM) campaign was carried out in the Gulf of Mexico to further develop marine electromagnetic techniques in order to aid the detection and mapping of gas hydrate deposits. Marine CSEM methods are used to obtain an electrical resistivity structure of the subsurface which can indicate the type of substance filling the pore space, such as gas hydrates which are more resistive. Results from the Walker Ridge 313 study (WR 313) are presented in this paper and compared with the Gulf of Mexico Gas Hydrate Joint Industry Project II (JIP2) logging while drilling (LWD) results and available seismic data. The hydrate, known to exist within sheeted sand deposits, is mapped as a resistive region in the two dimensional (2D) CSEM inversion models. This is consistent with the JIP2 LWD resistivity results. CSEM inversions that use seismic horizons provide more realistic results compared to the unconstrained inversions by providing sharp boundaries and architectural control on the location of the resistive and conductive regions in the CSEM model. The seismic horizons include: 1) the base of the gas hydrate stability zone (BGHSZ), 2) the top of salt, and 3) the top and bottom of a fine grained marine mud interval with near vertical hydrate filled fractures, to constrain the CSEM inversion model. The top of salt provides improved location for brines, water saturated salt, and resistive salt. Inversions of the CSEM data map the occurrence of a ‘halo’ of conductive brines above salt. The use of the BGHSZ as a constraint on the inversion helps distinguish between free gas and gas hydrate as well as gas hydrate and water saturated sediments.

Louisiana↗
USGS2026

Influence of new residential construction varying in housing density on bird species, human tolerance guilds, and communities

Human population growth and changing settlement patterns fuel the development of urban fringe lands worldwide, with implications for biodiversity. We conducted a 12-year study of birds in the fast-developing urban fringe lands of the central Puget Sound region, Washington, USA, to examine the effect of development configuration on birds. We hypothesized that lower-intensity conservation developments, compared to higher-intensity planned community developments, would benefit the overall bird community, as well as native forest birds (avoiders of human development) and avian generalist species (adapters to human development), but that higher-intensity planned community developments would benefit synanthropic species (exploiters of human development). We fit single-species and multi-species occupancy models to test these hypotheses. Consistent with our hypotheses, we found that a greater proportion of the overall community, avoiders, and adapters occupied lower-intensity conservation developments compared to higher-intensity planned community developments. However, we did not detect an effect of development type on the exploiter guild, and we found that species in the exploiter guild are variable in their response to the configuration of suburban developments. We also hypothesized that human tolerance guilds would be a useful predictor of individual species responses to development type. This hypothesis was somewhat supported: we found that, for avoiders, 87% of species in the guild had the same response to development type as the overall guild; for adapters, 63% had the same response as the overall guild, and for exploiters, only 44% had the same response as the overall guild. Our results indicate that the configuration of suburban developments can have a meaningful impact on bird communities, particularly on those species that are most sensitive to any level of development.

Washington↗
USGS2024

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California↗
USGS2025

Variable partitioning of lithium in rhyolitic melt during decompression and ascent

The partitioning behavior of Li in magmatic systems is increasingly being investigated due to the economic importance of Li in the transition to sustainable energy resources (e.g., batteries). However, at upper crustal pressures, it remains uncertain whether Li preferentially partitions into the vapor or liquid (brine) phase or remains in the silicate melt. This complicates our ability to determine where Li resides—silicate melt, minerals, or fluid phase—upon eruption, a crucial factor for understanding its postdepositional movement and concentration into a brine or volcano-sedimentary deposit. Here, we present a novel investigation into the behavior of Li within natural evolved melts during continuous magma decompression and ascent using melt embayments (open melt inclusions). Mineral-hosted melt embayments preserve records of the evolving composition of the exterior melt, including degassing pathways and ascent timescales, when paired with appropriate diffusion coefficients. Lithium concentration profiles were measured in quartz-hosted melt embayments from the rapidly quenched eruptive phases of five rhyolitic, caldera-forming eruptions to investigate the behavior of Li during magma decompression and ascent, where vapor partitioning and ascent dynamics were previously established by investigating H 2 O and CO 2 profiles. We find that in four systems, embayments contain lower interior Li concentrations than the coerupted melt inclusions; the fifth system contains the same Li concentrations in embayments and melt inclusions. However, many of these embayments contain gradients, with 84 % preserving Li enrichment near the melt-bubble interface, as compared to their interior concentration. We interpret these characteristics to represent two distinct stages of Li partitioning during magma decompression and ascent, in contrast to existing literature that proposes only one type of partitioning behavior. The first stage is interpreted as melt depletion of Li, likely driven by partitioning into an exsolved supercritical fluid phase, supported by the strong correlation between the extent of Li depletion and Cl concentration in the melt, as well as the decompression rate. This behavior then fundamentally shifts, where Li reenriches in the melt, postulated to be driven by the unmixing of the supercritical fluid phase at shallow pressures. For the one system that did not develop Li gradients through decompression, we attribute this to the lower values of Na and Cl in the melt, potentially inhibiting the partitioning of Li into a fluid phase. Importantly, the behavior of Li during decompression is not consistent within or between volcanic centers, highlighting the need for systematic experimental investigation in variable composition melts at pressures relevant to conduit dynamics. This knowledge would improve our ability to model Li profiles to understand magma decompression, and predict where Li resides (e.g., stored in volcanic glass, gas, or crystals) upon eruption prior to any later extraction.

Economic Geology↗
USGS2026

Estimation of parental abundance using hierarchical Bayesian modeling with data augmentation

Pedigree-based estimation methods leverage the fact that each offspring in a cohort is genotypically “marked” by its parents and represent a recent and promising toolset for estimating population dynamics. This includes pedigree accumulation estimators that model the “accumulation” of inferred unique parents within a given cohort to estimate parental abundance. Unlike close-kin mark-recapture approaches, which rely on intercohort comparisons, pedigree accumulation modeling can be completed solely using intracohort samples. This is particularly advantageous for semelparous species, where intercohort pairs are impossible and adult life stages can be difficult to sample without affecting their likelihood of successfully reproducing. Previous work has evaluated a range of estimators for such datasets, concluding that the non-parametric Chao estimator provides the most accurate and precise estimates for feasible levels of sampling effort. We used simulated data to evaluate an alternative estimator based on hierarchical modeling and data augmentation in a Bayesian framework. Results indicate that estimates from the hierarchical Bayesian estimator had comparable accuracy and better precision than both the previously tested Chao1 estimator and the improved iChao formulation across a range of sample sizes and sex ratios. Furthermore, the Bayesian estimator was far more robust to simulated errors in pedigree reconstruction, especially the presence of false negatives. Hierarchical Bayesian pedigree accumulation models can also provide additional insight into underlying reproductive ecology through their use of an explicit observation process, allowing for the incorporation or estimation of species- and population-specific reproductive dynamics. More broadly, the parametric nature of these models offers opportunities to efficiently pool information among datasets as well as to propagate uncertainty within more complex models.

Ecology and Evolution↗
USGS2024

Changes in soil erosion caused by wildfire: A conceptual biogeographic model

Soil erosion rates after wildfire are strongly controlled by intrinsic properties such as topography, weather, climate, soil, and vegetation. These landscape and hydroclimatic properties are important in determining post-fire erosion rates; however, their influence on post-fire erosion and their interaction with the intensity of a wildfire remains uncertain. A key limitation in resolving this uncertainty is the lack of conceptual models and frameworks for organising data related to the geomorphic sensitivity of landscapes to wildfire. Our aim is to develop a framework for consolidating understanding of post-fire erosion in the context of hydroclimatic conditions which contribute to system states, for example soil and vegetation properties, and wildfire regime. The framework is developed around a simple conceptual model where the change in erosion due to wildfire is a product of change in runoff generation and sediment supply, which is strongly related to landscape net primary productivity (NPP). We hypothesised that geomorphic sensitivity to wildfire should vary as a unimodal humped relationship across a gradient of NPP, peaking at an intermediate level. To develop this framework and to test the hypothesis, we first review intrinsic soil and vegetation properties related to the supply and transport of sediment from burned and unburned hillslopes. Net primary productivity is systematically related to these intrinsic properties because it integrates many processes involved in soil and vegetation development. Empirical data indicate a trend in the change in surface runoff generation with NPP after wildfire, peaking at an NPP of approximately 15 Mg C ha −1 y −1 . A simple model of fuel availability and soil heating are correlated with a similar “humped” trend in sediment supply. These results are consistent with our conceptual model, which indicates that sediment supply and runoff contribute towards a distinct peak in wildfire effects on erosion at an intermediate level of NPP. We propose that landscapes of intermediate NPP typically have the highest quantity of fuel available to burn, which cause large changes to the soil surface properties. Landscapes at intermediate NPP also tend to produce intrinsic soil and vegetation properties that promote erosion after wildfire. The interplay between these short and long-term landscape characteristics is strongest at intermediate levels of NPP. Our proposed biogeographic model of geomorphic sensitivity to wildfire was supported by erosion data from burned hillslope and zero-order catchments studies from a range fire-prone landscapes in Australia and North America. Our proposed conceptual model will help identify areas most vulnerable to post-fire erosion changes.

Geomorphology↗
USGS1983

Base flow and ground water in upper Sweetwater Valley, Tennessee

The upper Sweetwater Valley area has a flow system with complex interaction between surface and ground water. A water budget study indicated that during dry years approximately three-fourths of the annual flow to Sweetwater Creek may be derived from ground-water sources. Hydrograph analysis showed seasonal variation of recharge to the ground-water flow system. Streamflow records were analyzed to estimate the frequency of low flow of Sweetwater Creek at river mile 16.7, and indicated the lowest average flow for 1 day in 20 years to be about 5.1 cubic feet per second. Two periods of base-flow measurements of Sweetwater Creek identified channel reaches with significant gains and losses of streamflow. Base flow measurements also showed interbasin transfer of water among sub-basins of the valley. Major flow surpluses were associated with areas in which the majority of flow originated at a spring. Topographically low areas adjacent to the main stem of Sweetwater Creek generally have surplus flow. Topographically higher areas generally have deficient surface outflow unless significant spring flow occurs in the basin. Ground-water recharge occurs by water draining into sinkholes, faults, and fractures. Ground-water flow is regionally diffused across formation strikes from the topographically low areas unless the water is exposed to highly permeable formations or impervious formations. Ground water infiltrates the highly permeable formations and flows along strike. Ground water encountering impervious formations may discharge at small springs at the contact, or may reroute along the contact if the upgradient rock is sufficiently permeable or has well developed secondary porosity. Groundwater discharges to streams at innumerable seeps and at a few large springs. Areas of ground-water flow up-gradient of large springs are hypothesized as likely areas of significant ground-water reservoirs.

Tennessee↗
USGS2024

High resolution identification and quantification of diffuse deep groundwater discharge in mountain rivers using continuous boat-mounted helium measurements

Discharge of deeply sourced groundwater to streams is difficult to locate and quantify, particularly where both discrete and diffuse discharge points exist, but diffuse discharge is one of the primary controls on solute budgets in mountainous watersheds. The noble gas helium is a unique identifier of deep groundwater discharge because groundwater with long residence times is commonly enriched in helium. In this study, a portable mass spectrometer was used to measure longitudinal variation in dissolved helium concentrations in two mountainous rivers at high spatial resolution not feasible with traditional sampling techniques. Helium profiles were then simulated using a mass-balance model to quantify longitudinal variation in groundwater discharge to the receiving rivers. Results indicate helium concentrations were enriched by multiple orders of magnitude above atmospheric equilibrium in both rivers and that this persisted for up to 18 km below observed pulse inputs in the Colorado River. Helium mass-balance models match observed longitudinal patterns with the exception of sharp initial increases in helium observed in the rivers. Increased longitudinal groundwater discharge rates correspond to mapped geologic structures in both watersheds that likely transport deep geothermal water. Models show variable sensitivity to spatial assignment of input variables representing the groundwater source, illustrating the importance of collecting data from discrete groundwater discharges where possible. The methodology shows promise for field experiments designed to assess air–water exchange rates and to quantify total groundwater discharge from a combination of discrete and diffuse sources.

Colorado, Utah↗
USGS2026

King Rails in southeastern Arkansas are majority resident

King Rails ( Rallus elegans ), a declining species of secretive marsh bird, have a mixed migratory strategy, with some individuals migrating and some being year-round residents. Determining the distribution of migratory versus resident King Rails is critical to guiding habitat management and assessing risks to populations. We examined the migratory status of adult King Rails at the Choctaw West Wildlife Management Area in southeastern Arkansas, the only known site in Arkansas with multiple breeding pairs. Of the 23 adult King Rails we tagged in 2022 and 2023, two birds migrated away from the local area, one in each year. One migrated 145 km, and the other 450 km. Our findings suggest that the line between the migratory and resident range of Arkansas King Rails could be north of our site.

Arkansas↗
USGS2025

Gulf Coast Basin CORE-CM initiative final report

The Bureau of Economic Geology at the University of Texas at Austin (UT-BEG) is leading the Gulf Coast Carbon Ore, Rare Earth, and Critical Minerals (CORE-CM) Initiative to assess the potential to produce critical minerals (CMs), including rare earth elements (REEs) from coal, coal ash, and produced water related to oil and gas production, and related materials (alumina processing waste [red mud], heavy mineral sands, graphite, and zeolite) within the Gulf Coast Basin. This project represents the first phase in a long-term program and provides reconnaissance data that will be foundational for future work by assessing resources and suggesting plans to be conducted in future work and expanding stakeholder engagement. The project includes several tasks designed to identify, characterize, and assess several necessary aspects for development of CMs and REEs in the Gulf Coast Basin.

Gulf Coast basin↗
USGS2026

Tringa flavipes (Lesser Yellowlegs) from separate breeding sites subdivides the Prairie Pothole Region in space and time during southbound migration

Some staging regions support multiple groups of the same migratory species, each of which may use the region differently. Characterizing the ways, in which separate groups use such regions can therefore help to identify vulnerabilities during this sensitive period of the annual cycle. The Prairie Pothole Region (PPR) is a massive wetland complex in the northern Great Plains of North America used by ∼11 million shorebirds during migration. The PPR has been heavily modified by agriculture and is experiencing varied effects of global climate change, threatening the health of the shorebirds that rely on it. Here, we used 6 seasons of southbound tracking data of Tringa flavipes (Lesser Yellowlegs)—a long-distance migratory shorebird species with an estimated population decline of 63% over the last 4 decades—from 9 sites across their breeding range to explore differences in migratory behavior within this important staging region. We found that 75% of tracked individuals used the region during southbound migration, and T. flavipes from different breeding sites detoured 110–875 km from their most direct migratory route to access the PPR. Individuals that arrived later stayed longer and made more stops within the region than those that arrived early. Individuals originating from different breeding sites also displayed spatial and temporal segregation within the region: T. flavipes from southwest and central Alaska relied heavily on the northwestern PPR, while those from Canada used the central and southeastern portions of the PPR. Finally, timing of use varied among groups, but the southeastern PPR became increasingly important over the course of the southbound migratory window, as other wetlands likely dried out. Our study highlights the portions of the PPR of critical importance to migrating T. flavipes and the diversity of ways, in which different groups from within the same species can use a single staging region.

Alaska, Manitoba, Northwest Territories, Ontario, ↗