USGS ScienceSearch

SEARCH · USGS Science

Results for “The Planetary Science Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,665 records · Page 64Linked to original sources

Pediment formation and subsequent erosion in Gale crater: Clues to the climate history of Mars

Evidence of paleo-rivers, fans, deltas, lakes, and channel networks across Mars has prompted much debate about what climate conditions would permit the formation of these surface water derived features. Pediments, gently sloping erosional surfaces of low relief developed in bedrock, have also been identified on Mars. On Earth, these erosional landforms, often thought to be created by overland flow and shallow channelized runoff, are typically capped by fluvial sediments, and thus in exceptionally arid regions, pediments are interpreted to record past wet periods. Here we document the Greenheugh pediment in Gale crater, exploiting the observational capability of the Curiosity rover. The absence of a fluvial cap suggests that the pediment was likely cut by wind erosion, not fluvial processes. The pediment was then buried by an aeolian deposit (Stimson sandstone) that mantled the lower footslopes of Aeolis Mons (informally known as Mt. Sharp). This burial terminated active wind erosion, preserving the pediment surface (as an angular unconformity). Groundwater was present prior-to, during, and shortly after Stimson deposition, perhaps contributing to lithification and certainly to early diagenesis. Post lithification, wind erosion first cut canyons in the northern most footslopes (north of Vera Rubin ridge). Unlithified gravels were deposited in these canyons, likely due to runoff from Mt. Sharp. Boulder-rich fluvial and debris flow deposits built a > 70 m thick sequence (Gediz Vallis ridge) on the southern Greenheugh pediment. Continued wind erosion left elevated patches of gravel on the northern footslopes, and exposure age dating shows that erosion essentially ceased before 1 Ga (but possibly much earlier). Erosion to the south led to emergence of Vera Rubin ridge, retreat of the Greenheugh pediment, and the formation of Glen Torridon valley. Hence, this footslope environment of Mt. Sharp records climate-driven periods of wind erosion, aeolian deposition (and groundwater activity), surface runoff and sediment deposition, followed by further significant wind erosion that declined to present very slow rates. This likely occurred during the late Hesperian and possibly into the Amazonian.

Icarus

An inventory of three-dimensional geologic models—U.S. Geological Survey, 2004–22

A database of spatial footprints and characteristics of three-dimensional geological models that were constructed by the U.S. Geological Survey between 2004 and 2022 was compiled as part of ongoing development of subsurface geologic information by the USGS National Cooperative Geologic Mapping Program. This initial inventory resulted in the compilation of 38 three-dimensional geological models that vary widely in their spatial extent, the type and purpose of the model, the number of subsurface units characterized by the model, and the software platforms used to create the model. This Data Report provides the scientific rationale and explanation of the contents of a companion USGS digital data release of spatial data and attributes associated with each three-dimensional model.

Data Report

Corundum discovered by SuperCam and the Perseverance rover at Jezero crater, Mars

Mars is primarily composed of mafic mineral assemblages and their alteration products, but small, scattered rocks strewn across the landscape offer clues to greater petrological diversity. While traversing the Jezero crater rim, the Perseverance rover encountered several plagioclase-rich light-toned float rocks. SuperCam identified the distinctive signature of corundum (α-Al 2 O 3 ) in these rocks using time-resolved luminescence spectroscopy. Two strong peaks (692.7 and 694.1 nm) with millisecond lifetimes, and additional supporting lines, are consistent with Cr 3+ substitution for Al 3+ in corundum. Corundum forms in Al-rich, Si-depleted environments through magmatic or metamorphic processes. Given the rocks' small size, association with plagioclase, and location on the crater rim, we interpret the most plausible formation scenario to be impact induced metamorphism at the interface of a felsic and a mafic/ultramafic member with the likely action of fluids at some stage, although other possibilities are not excluded.

Geophysical Research Letters

Evaluation of nutrient, alkalinity, and acid-neutralizing capacity stabilities in water samples analyzed by the U.S. Geological Survey National Water Quality Laboratory, 2023–24

The U.S. Geological Survey evaluated the stability of water-sample chemical analysis of nutrient, alkalinity, and acid-neutralizing capacity constituents with respect to the duration between sample collection and laboratory analysis, also known as the sample holding time. A study began in the spring of 2023 to evaluate the sample stability, between 2 and 180 days after sample collection, of the chemical properties and chemical constituents of alkalinity as calcium carbonate, filtered; acid-neutralizing capacity as calcium carbonate, unfiltered; total ammonia as nitrogen, filtered; total ammonia plus organic nitrogen as nitrogen, filtered and unfiltered; nitrite as nitrogen, filtered; nitrate plus nitrite as nitrogen, filtered; total nitrogen, filtered and unfiltered; orthophosphate as phosphorous, filtered; and total phosphorus as phosphorus (filtered and unfiltered) in water. Both surface water and groundwater matrices were represented. Sample instability varied by observed property and matrix; therefore, providing general guidance for sample holding time is not possible based on matrices alone. No correlations between field measurements of sample characteristics and sample instability were observed. Although observations for some properties indicate sample stability that exceeds the recognized U.S. Geological Survey National Water Quality Laboratory method holding times, this is not necessarily the case for matrices and seasonal characteristics that were not investigated. Based on the limited number of six sample sources used in this study, some patterns emerge for the 12 observed properties studied. Five observed properties generally indicate stability for as many as 180 days after sampling (total nitrogen as nitrogen, both filtered and unfiltered; orthophosphate as phosphorus, filtered; and phosphorus as phosphorus, both filtered and unfiltered). Other observed properties indicate stability for as many as 180 days for some matrices, but not for others. Finally, some observed properties indicate instability well before 180 days.

Scientific Investigations Report

The advantages of electric-grade heat storage in long closed-loop wells

Though long (e.g., tens of kilometers) closed-loop geothermal wells are under consideration for the extraction of subsurface heat, these wells might also serve as an efficient energy storage mechanism for electricity generation. Using a semi-analytic model solution, the potential for electric-grade heat storage as a function of ambient temperature (e.g., corresponds to depth of loop), well length, well diameter, and flow rate is evaluated. The following simplified cases for comparison of standard closed loop operation with energy storage operation were considered: [1] constant flow rate and constant temperature (90 °C) injection to represent the standard closed-loop base-case; and [2] constant flow rate and annual cycle sinusoidal temperature (90-150 °C) to represent seasonal (summer) charging while solar resources are peak. Initial temperatures for all scenarios considered herein are a uniform 175 °C. Electric-grade heat is assumed to be delivered whenever temperatures at the extraction point exceed 90 °C. For calculation purposes only, if temperature falls below 100 °C, it is assumed that heat delivered is sub-economic, so no electricity would be produced. For all scenarios, temperatures at the extraction well asymptotically approach the flow-weighted average injection temperature, but energy storage scenarios exhibited a damped time-varying signal that diminishes in magnitude with length of the loop. The asymptotic approach depends on initial temperatures in the rock and the heat extraction rate (a function of well diameter and flowrate). This analysis demonstrates that shorter closed loops can produce more electricity over time than longer closed-loops previously proposed for electricity production over typical engineering design lifetimes (e.g., 30 years). Although only a high-temperature scenario is considered herein, rock that is initially below boiling temperature would not host a standard closed-loop resource, but injection of hot water seasonally would asymptotically heat this low-temperature system to temperatures capable of electricity production. In other words, regardless of initial temperatures, closed loops could be used to store electricity with no critical minerals in the geothermal battery.

Conference Paper

A framework for understanding the effects of subsurface agricultural drainage on downstream flows

Understanding controls on streamflow volume and magnitude is important to water resource management applications, such as critical water and transportation structure design and floodplain mapping. Changes in land use and agricultural practices, such as subsurface agricultural drainage, may be contributing to changes in streamflow characteristics. Subsurface agricultural drainage, also known as tile drainage, is the practice of installing drains in the subsurface of agricultural fields to improve productivity. Because of the complex interactions between subsurface drainage systems, precipitation, local soil conditions, and land management practices, it is difficult to determine how subsurface agricultural drainage affects downstream flow. Previously developed subsurface agricultural drainage conceptual models under dry, saturated, and winter conditions are summarized, and current literature on the effects of subsurface agricultural drainage on downstream flows, focusing on peak flow, non-event flow, and total flow to develop frameworks for discussing these systems is compiled. The effects that subsurface drainage has on hydrologic systems are expected to vary by site and are seasonally based on system design, soil type, moisture conditions, precipitation characteristics, and land conditions. Subsurface drainage can affect the magnitude of peak flow by converting surface runoff from a storm event to subsurface runoff. By increasing hydrologic connectivity of a catchment, subsurface drainage can increase non-event flow or the flow between two storm events, typically dependent on lateral flow through the subsurface and groundwater. Theoretically, by diverting water from groundwater recharge or by reducing water available for evapotranspiration, subsurface drainage may increase the total volume of flow. Precipitation changes may increase infiltration, excess overland flow, and flood risk regardless of the presence or absence of subsurface drainage.

Illinois, Iowa, Michigan, Minnesota, Missouri, Mon

Using public participatory geographic information systems (PPGIS) to explore uses and values for Mojave Trails National Monument, California

Many people ascribe a variety of values to public lands and waters, but some values are more difficult to assess and quantify than others. Public participatory geographic information systems (PPGIS) are tools that have been used to help quantify and map the public’s diverse values for a landscape. This work describes the first known Office of Management and Budget–approved use of PPGIS by a Department of the Interior bureau. The U.S. Geological Survey developed an internet-based application to aid in gathering PPGIS data, called Values Mapping for Planning in Regional Ecosystems (VaMPIRE). Further, this work describes the first pilot of the VaMPIRE application in coordination with the Bureau of Land Management to collect spatial data and other survey data regarding the public’s uses of and values for locations within Mojave Trails National Monument. We emailed the link to the VaMPIRE application to an interested party email list in 2024 with 207 valid emails and received 74 responses; we also received 47 responses from members of an off-roading social media group. Of the list of 16 value options, recreation was the most popular value for the monument, followed by wilderness and inspirational. Over 1,000 points were placed throughout the monument, indicating locations people use or value, with the locations spread throughout the entire monument. Additionally, most survey respondents stated their ability to receive benefits in locations they mapped would not change in response to a hypothetical scenario related to recreational facility development. This report describes exploratory results from the first use of the VaMPIRE tool in Mojave Trails National Monument and includes reflections on how the process went and considerations for future use of VaMPIRE.

California

Eruptive history within the vicinity of Al Madīnah in northern Harrat Rahat, Kingdom of Saudi Arabia

The northernmost part of the Harrat Rahat volcanic field contains early Pleistocene to Holocene mafic eruptive products within the vicinity of the city of Al Madīnah, Kingdom of Saudi Arabia. A detailed geologic investigation into the eruptive history of a 570 square kilometer (km 2 ) area covering Al Madīnah and the surrounding area has yielded 33 mapped Quaternary volcanic units consisting of lava flows, scoria cones, and shield volcanoes. These eruptive products consist of continental, intraplate alkalic and minor transitional basalts, hawaiites, and a single mugearite that were emplaced from at least 1,014±14 thousand years ago (ka) to a single Holocene eruption in 1256 C.E. Lava flows are generally 10 to 15 kilometers (km) long (but can reach 23 km long), 1 to 3 km wide, and at least 10 meters thick. Most of the mapped units erupted episodically between 400 and 340 ka and 180 and 100 ka. Despite small individual volumes (less than 1 cubic kilometers dense rock equivalent), each unit represents eruption of a distinct magma batch that was strongly influenced by clinopyroxene, olivine, and plagioclase fractionation. Some of these units are interpreted to have undergone magma mixing pre- and (or) syneruptively. Integrating eruption ages, geochemistry, and paleomagnetic data yields evidence that some eruptions were temporally and (or) spatially clustered. Aligned scoria cones and elongate vent edifices were constructed atop fissure vent systems that reflect the local stress field, which controls dike ascent through the middle and upper crust.

Professional Paper

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands

Generating geochemical and mineralogy distributions of soil in the conterminous United States using Bayesian hierarchical spatial models

Characterizing geochemical and mineralogical soil distributions across large spatial extents is essential for understanding mineral resources, ecosystem processes, and environmental risks. Rasters of soil geochemical distributions for the conterminous United States, however, are limited. We present a Bayesian modeling workflow and tool for generating predictive geochemical and mineralogy distribution maps for the conterminous United States using integrated nested Laplace approximation (INLA) with the stochastic partial differential equation approach. By modeling soil geostatistical data with environmental covariates (soil properties, topography, climate, and land cover), we generate predictive distributions of soil geochemistry that can be mapped or extracted for further analyses. As an example, we model the spatial distribution of trace elements in soil relevant to vertebrate health (cobalt, copper, iron, manganese, selenium, and zinc) and provide a workflow that can be used to generate and visualize predictive distributions of 39 other major and trace elements and 21 minerals of the soil survey, supporting a variety of ecological, environmental, and agricultural applications.

MethodsX

The feasibility of using lidar-derived digital elevation models for gravity data reduction

Gravity data require submeter elevation accuracy for data processing, and differential global navigation satellite system (dGNSS) equipment is commonly used to acquire three-dimensional positional data to achieve such accuracy. However, lidar (light detection and ranging) data are commonly used to develop digital elevation models (DEMs) of Earth’s surface. Therefore, using elevations from lidar-derived DEMs for gravity-data acquisition and reduction may improve field efficiency and reduce cost. This study examines the feasibility of using DEMs for gravity-data reduction by comparing dGNSS elevation data from 435 gravity stations in Michigan, Wyoming, and Colorado with their respective DEM elevations. The results show that the average difference between DEM and dGNSS elevations is 13 centimeters (cm) and that 93 percent of those differences are less than 50 cm, even in areas with steep terrain. Because an elevation discrepancy of 50 cm corresponds to an error of roughly 0.1 milligals (mGal) in the simple Bouguer gravity anomaly, the results suggest that lidar-derived DEMs are a viable source for acquiring the elevation data needed to process gravity data, thus improving both the cost and efficiency of data collection for regional surveys where an accuracy of less than 1.0 mGal is desired.

Open-File Report

Analysis of factors affecting plume remediation in a sole-source aquifer system, southeastern Nassau County, New York

Several plumes of dissolved, chlorinated solvents, including trichloroethylene, have been identified in a sole-source aquifer near the former Northrop Grumman Bethpage Facility and Naval Weapons Industrial Reserve Plant sites in southeastern Nassau County, New York. Past investigations have documented that the groundwater contamination originated from this industrial area and now extends to the south, in the direction of groundwater flow. The intermixed plumes are commonly referred to as the “Navy Grumman groundwater plume.” Detailed groundwater-flow modeling was needed for the New York State Department of Environmental Conservation (NYSDEC) to evaluate design options necessary for the construction, operation, optimization, maintenance, and monitoring of a groundwater extraction and treatment cleanup plan selected in a December 2019 Amended Record of Decision by the NYSDEC to comprehensively address these plumes. Consequently, the NYSDEC began a cooperative study with the U.S. Geological Survey in 2020 to better understand the local hydrogeologic framework using two independent approaches to characterize aquifer heterogeneity and update an existing regional groundwater-flow model to provide transient boundary conditions for new inset groundwater-flow models of the plume area. We developed these detailed inset models for the two independent aquifer characterizations using history-matching techniques coupled with a novel approach to risk-based management optimization of the remedial design. We also used the updated regional model to assess this optimized groundwater extraction and treatment design for potential saltwater intrusion. The ensembles of parameters resulting from history matching provided a platform with which to evaluate capture by water-supply and remedial wells using particle-tracking techniques. Using the ensemble to select a risk stance, we performed multiobjective optimization to identify various configurations of remedial pumping that are consistent with external constraints and that favor potentially competing objectives. Multiple solutions provide tradeoffs that NYSDEC can consider. In general, pumping redistribution may help to prevent further contamination migration downgradient. These and other study results are intended to support decisions for the remedial design focused on the local area encompassing the full extent of the Navy Grumman groundwater plume.

New York

Nanometer-scale relationships between sedimentary organic matter molecular composition, fluorescence, cathodoluminescence, and reflectance: The importance of oxygen content at low thermal maturities

Molecular characterization of sedimentary organic matter (SOM), termed macerals, is a common goal when seeking to understand petroleum generation as well as other geologic processes in deep time. However, unambiguous measurement of discrete macerals is challenging due to the small size of organic particles in sedimentary rocks, the proximity of different organic matter types to one another, mineral-organic matter interactions, and maceral mixing that occurs during SOM isolation prior to ex situ analysis. The recent advent of infrared spectrometers capable of nanometer-scale resolution and the application of these technologies to geologic samples has enabled advances in rapid, in situ molecular characterization of SOM allowing for insights into paleoenvironmental processes, such as organic matter productivity and preservation, among others. Here we employ one such technology, optical photothermal infrared (OPTIR) spectroscopy, to map SOM functional group distributions at 500-nm resolution in a sample from the Lower Cretaceous Sunniland Limestone of the South Florida Basin. Examined fields of view include occurrences of amorphous organic matter (AOM), inertinite, micrinite, solid bitumen, telalginite, and vitrinite. OPTIR data from these macerals are compared against traditional organic petrographic data from the same organic grains including fluorescence intensity and white light reflectance as well as against cathodoluminescence response, an emerging organic petrographic approach. Maceral oxygen content (using carbonyl functional group abundance as a proxy) is observed to vary widely between maceral types but correlates strongly with fluorescence and cathodoluminescence intensity as well as against reflectance. These findings highlight the important role that oxygen content plays in determining the optical properties of SOM and further demonstrate the ability of OPTIR to discriminate subtle molecular differences between SOM types.

Organic Geochemistry

Cajon Pass and the southern San Andreas Fault System: Earthquake cycle stress accumulation and present-day loading

With over a century since the last major rupture affecting the wider Los Angeles region, tectonic stress has steadily built along the southern San Andreas and San Jacinto fault systems, raising concerns of an imminent large earthquake. Cajon Pass, located at the junction of these faults, represents a critical site for potential through-going ruptures in Southern California. We constructed new 4D earthquake cycle simulations using a 1000-year paleoseismic rupture history of the San Andreas Fault System (SAFS) to assess spatial and temporal variations in stress. A semi-analytic Fourier transform model was used to compute stress from 3D dislocations in an elastic plate overlying a Maxwell viscoelastic half-space, assuming a complete coseismic reset of resolved shear stress on ruptured elements. Results show highest stress accumulation north of Cajon Pass (∼1.8 MPa/100 years) due to greater slip rates, and lower rates south of Cajon Pass (∼1.0–1.5 MPa/100 years). By 2025, Coulomb stress is estimated at 2.8 MPa on the Mojave South (MOS) segment, 1.8 MPa on the North San Bernardino (NSB1) segment and 3.6 MPa on the San Jacinto Bernardino (SJB) segment. Segments accumulate stresses with characteristic ranges of pre-event stress interpreted as failure thresholds: 1.2–2.7 MPa for MOS, 0.4–1.6 MPa for NSB1, and 1.2–2.9 MPa for SJB. When the stress disparity between segments SJB and MOS narrows, the faults appear to rupture jointly, suggesting that stress levels may control how Cajon Pass acts as an earthquake gate. These results may inform seismic hazard assessments by linking stress evolution to fault interactions.

California

Assessment and characterization of ephemeral stream channel stability and mechanisms affecting erosion in Grand Valley, western Colorado, 2018–21

The Grand Valley in western Colorado is in the semiarid Southwest United States. The north side of the Grand Valley has many ungaged ephemeral streams, which are of particular interest because (1) the underlying bedrock geology, Late Cretaceous Mancos Shale, is a sedimentary rock deposit identified as a major salinity contributor to the Colorado River and (2) despite infrequent streamflows of short duration, monsoon-derived floods in these ephemeral streams can carry substantial amounts of sediment downstream, affecting upstream and downstream banks and channel cross sections. The study area is of interest, because salinity, or the total dissolved solids concentration, in the Colorado River causes an estimated $300 million to $400 million per year in economic damages in the United States, and it is estimated 62 percent of the Upper Colorado River Basin’s total dissolved solid loads originate from geologic sources. In an effort to minimize salt contributions to the Colorado River from public lands administered by the Bureau of Land Management, a comprehensive salinity control approach is typically used to reduce nonpoint sources of salinity through land management techniques and practices. In 2018, the U.S. Geological Survey, in cooperation with the Bureau of Land Management, began an assessment of ephemeral streams located on the north side of the Grand Valley, western Colorado, to characterize stream channel stability and identify mechanisms affecting erosion. The U.S. Geological Survey developed a method for automatically extracting channel cross-section geometry from existing remotely sensed terrain models. Based on estimated flood stage and surrogate streamflows, hydraulic characteristics were calculated. Furthermore, the channel geometries and hydraulic characteristics were used to estimate channel stability using a statistical model. Cross-section stabilities were determined from a stream channel stability assessment for a subset of 1,406 visited (field observed) locations out of 13,415 cross sections, which were delineated from remotely sensed terrain models. The application of Manning’s resistance equation in combination with multiple logistic regression models demonstrated channel stability can be estimated with a 0.845 goodness of fit for a validation dataset when using a combination of drainage area, width-to-depth ratio, sinuosity, and shear stress as the explanatory variables. Stream channel stability was extrapolated for 13,415 unvisited (not field observed) cross sections using the multiple logistic regression model and defined explanatory variables. Mapping of the ephemeral streams and their associated stabilities may be used by the Bureau of Land Management to prioritize areas for remediation or changes in management strategies to reduce sediment and salinity loading to the Colorado River. The study found channel stability within the ephemeral streams to be spatially variable, longitudinally discontinuous, and dictated by changes in channel bed slope. The stable ephemeral streams were relatively wide and shallow and often had smaller drainage areas with less potential for producing shear stresses capable of overcoming channel adhesion. A change in channel bed slope can provide the means necessary to generate shear stresses appropriate to initiate erosion and a subsequent stability transition to incising channels. Channel widening happens when either or both banks of an incising channel reach a critical height for mass wasting, or when channel curvature causes higher sidewall stress. Regardless, widening channels can promote increases in sinuosity and subsequently reduce steep channel bed slopes. Consequently, stable and widening channels can have comparable bed slopes, making channel bed slope a poor explanatory variable to predict channel stability overall, despite its function to initiate channel instability. The results were based on a surrogate 0.10 annual exceedance probability (AEP; return period equal to the 10-year flood) interval streamflow, although it was recognized fluctuations in streamflow would also affect channel stability. Past and current changes within the study area affect streamflow; therefore, mechanisms affecting erosion include land use disturbances, soil compaction, loss of vegetation cover, drought, less frequent and more extreme precipitation, and fires—which all intensify the potential runoff and erosion within the study area.

Colorado

Reflections on a trio of North American earthquakes in 1925

In 1925, three moderately large damaging earthquakes occurred in North America over four months: the 28 February (local time; LT) M 6.2 Charlevoix, 27 June (LT) M 6.6 Montana, and 29 June M 6.5 Santa Barbara earthquakes. The centennial anniversaries of these events motivated this retrospective consideration focused on the ground motions generated by the three events, including a reconsideration of early intensity assignments for the Montana earthquake. At the time, these three earthquakes appeared to support the arguments of some geologists who downplayed the severity of seismic hazard in southern California relative to other parts of the country. Some of the arguments advanced at that time, for example that Los Angeles “has the least to fear from ‘Acts of God’ of any city under the American flag,” ( Hill, 1928 ) sound naïve if not laughable now, but a comparison of well‐constrained shaking distributions for the three earthquakes reveals the dramatic difference in wave propagation efficiency in western versus eastern North America (ENAM), which leads to moderate ENAM events being felt to much larger distances. At M 6.2, the 1925 Charlevoix earthquake was a notably large event in ENAM. This earthquake was the largest event in eastern Canada since 1870 and caused damage in the epicentral region in addition to towns as far away as 200 km, with felt shaking extending over 1000 km. In contrast, felt shaking from the Santa Barbara earthquake barely extended beyond ∼200 km. Compiling published intensity distributions for larger ENAM earthquakes, we show that perceptible earthquake shaking is not uncommon in ENAM over century time scales, but experience with weakly felt shaking may incline people to downplay potential earthquake risk.

California, Montana, Quebec

Spatiotemporal variability of algal biomass and nitrate in Owasco and Seneca Lakes in the Finger Lakes Region, New York, in 2019

Cyanobacterial harmful algal blooms (CyanoHABs) have become increasingly common, threatening the security of water resources globally. The U.S. Geological Survey conducted high-resolution nearshore mapping surveys using boat-mounted multiparameter sondes and nitrate sensors during the summer and fall of 2019 on Owasco Lake and Seneca Lake, two lakes with documented CyanoHABs in the Finger Lakes region of New York State. Discrete sensor measurements and water-quality samples were collected at fixed points along survey routes and continuous data were generated at open-water monitoring platforms. This investigation examined whether water-quality information from nearshore surveys was representative of open-water conditions and if nearshore surveys could be used to identify areas with localized nearshore CyanoHABs and potential sources of nutrients not captured by tributary sampling. In addition to comparisons across methods, nearshore concentrations of nitrate and chlorophyll were evaluated relative to tributary outlets, cyanobacterial abundance and biovolume at discrete locations, and the locations of near-surface CyanoHABs that were designated as “confirmed with high toxins” by the New York State Department of Environmental Conservation. Nitrate and chlorophyll concentrations were comparable across methods for each lake, although concentration ranges were typically higher for nearshore mapping datasets than for nearshore discrete datasets. Nearshore surveys indicated areas of nitrate enrichment that varied temporally in both lakes. Orthophosphate was not routinely detected. Across methods, median chlorophyll concentrations were higher for the summer survey than for the fall survey in Owasco Lake. Nearshore chlorophyll concentrations varied more temporally in Owasco Lake than in Seneca Lake. Phytoplankton and cyanobacterial abundance and biovolume were about five times higher in Owasco Lake than in Seneca Lake. Cyanobacteria dominated the phytoplankton community in most samples, and Microcystis comprised the bulk of the cyanobacterial biovolume. The most abundant potential cyanotoxin-producing (specifically microcystins) genera were Microcystis , Synechococcus , Aphanocapsa , and Pseudanabaena . The cyanobacterial community composition was comparable between open-water monitoring platforms and nearshore samples. Microcystins were detected in seven survey samples from Owasco Lake, in one survey sample from Seneca Lake, and in one sample each from the open-water monitoring platforms on Owasco and Seneca Lakes that were collected about 7 days before the fall surveys. Microcystin detections were not consistently associated with high cyanobacterial cell counts or cyanotoxin-producing genera. Results from nearshore surveys were comparable to open-water monitoring platforms and discrete nearshore observations in the absence of nearshore or open-water CyanoHABs in these systems during the study. Patterns of nearshore concentrations of nitrate and chlorophyll from nearshore surveys may aid in the identification of areas with localized nitrate loading and shifts in phytoplankton abundance and community composition.

New York

Color-Shaded Relief Bathymetry of Lake Chelan, Washington

In 2023, the U.S. Geological Survey (USGS) completed a 3-week field operation in Lake Chelan, Washington, the third deepest lake in the conterminous United States, to acquire sediment cores, high-resolution bathymetry data, and chirp sub-bottom profiles. The high-resolution bathymetry displayed in this map publication was collected using a Norbit Winghead i67-curved array multibeam system; raw data were cleaned and gridded (3 by 3 meters [m]) in the Teledyne CARIS software. In some locations where the slopes of Lake Chelan are near-vertical, multibeam returns were sparse, resulting in artifacts resembling holes that appear as grey dots within the color-shaded bathymetric relief. Although the 2023 bathymetric mapping of Lake Chelan resulted in similar morphometric characteristics to previous hydrographic campaigns (table 1; Kendra and Singleton, 1987; Pelletier and others, 1989), these new data provide a much more detailed understanding of the two physiographic basins that comprise Lake Chelan: the deeper (as deep as 445.8 m [fig. 1]; previously reported as 453 m) and narrower (1–2 kilometers [km] wide) Lucerne Basin to the north, and the shallower (as deep as 127.8 m [fig. 1]), and wider (2–3 km wide) Wapato Basin to the south. With this detailed imaging of Lake Chelan, we find pervasive morphological evidence of slope failure and mass-transport deposits (MTDs) in at least 89 locations within the lake and 63 subaqueous deltas (fig. 2). The deeper Lucerne Basin is dominated by steep slopes and numerous subaqueous deltas fed by steep fluvial catchments, whereas the Wapato Basin contains numerous landslide scarps, scars, and debris aprons along the more gently sloping lake margins, and abundant relict kettle structures from the Pleistocene deglaciation. Lake Chelan’s geomorphic, geophysical, and sediment data contain important records of glacial retreat and advance, regional volcanic eruptions, and earthquakes that generate ground motions severe enough to induce landslides recorded in the sediment as MTDs. The epicenter of the 1872 Washington State Earthquake (M 6.5–7.2; Bakun and others, 2002; Brocher and others, 2017; Sherrod and others, 2021) is along the Spencer Canyon Fault, near the southern end of Lake Chelan. Shaking from this earthquake was strong enough to affect local aquifers, induce liquefaction of unconsolidated sediments, produce large seiches (Brocher and others, 2018), and likely cause landslides within Lake Chelan.

Washington