USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Depositional Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources
USGS1992

Beach-ridge development and lake-level variation in southern Lake Michigan

The most accurate source of information on lake-level fluctuations in the Great Lakes is the historical record from lake-level gauges. Although it can be semiquantitatively extended back into the late 1700's, the historical record is too short to recognize long-term patterns of lake-level behavior. To extend the historical record, information must be obtained from the Great Lakes geologic record. Such information includes the elevation and age of geomorphic features and stratigraphic sequences. One of the longest geologic records of late Holocene lake-level variation is preserved in a beach-ridge complex along the southern shore of Lake Michigan called the Toleston Beach. This strandplain contains over 150 beach ridges that arc across northwestern Indiana and fan out into northeastern Illinois. Each ridge was formed during the fall from a high lake level, and the elevation of the foreshore deposits in each ridge provides information on the upper physical limit of lake level over the past 4000 years. Three scales of quasi-periodic lake-level variation were determined by radiocarbon-dating basal peats of wetlands between the ridges and by measuring the elevation of foreshore (swash) deposits within ridges. These three scales are: (1) a short-term and small-scale fluctuation of 25 to 35 years with a range of about 0.5 to 0.6 m; (2) an intermediate-term and meso-scale fluctuation of 140 to 160 years and a range of about 0.8 to 0.9 m; and (3) a long-term and large-scale fluctuation of 500 to 600 years and a range of 1.8 to 3.7 m. The short-term and intermediate-term fluctuations are reflected in the historical record. An increase in the rate of shoreline progradation from east to west across Indiana's shoreline causes differential preservation of the lake-level fluctuations. That is, groups of four to six ridges in the western part of the strandplain that formed in response to the small-scale fluctuations combine eastward into single ridges and groups of ridges representing the meso-scale fluctuations. The large-scale fluctuations produced the most dramatic response in the western part of the Toleston Beach. Here, following each high stand, individual spits prograded southward off of a bedrock headland. The successive spit extensions created several small lakes landward of the spits and started the 20 km eastward stream-mouth deflection of the Grand Calumet River across Indiana's western lakeshore.

Illinois, Indiana↗
USGS2015

Paleoceanographic, and paleoclimatic constraints on the global Eocene diatom and silicoflagellate record

Eocene diatom and silicoflagellate biostratigraphy are summarized and correlated with the most recent geologic time scale as well as with the global oxygen isotope and eustatic sea level curves. The global distribution of Eocene diatom/silicoflagellate-bearing sediments varies considerably, reflecting changing oceanic gateways and paleoceanography with changing patterns that are punctuated by four major depositional events. Event 1 (~ 49 million years ago, Ma), at the end of the Early Eocene Climatic Optimum (EECO), saw the cessation of diatom/silicoflagellate deposition in epicontinental regions of the North Sea region and in the northern Russia and the onset of biosilica deposition in the Arctic. Event 2 (~ 46 Ma), which coincided with intensification of the Middle Eocene cooling trend, marked the widespread expansion of diatom/silicoflagellate deposition in both the North and South Atlantic. A shift of diatom/silicoflagellate deposition from the Atlantic to the Pacific began at Event 3, at the end of the Middle Eocene Climatic Optimum (MECO) (~ 40 Ma), that was likely tied to the initial opening of the Drake Passage between Antarctica and South America. Event 4 (~ 39 Ma) coincided with a major sea level fall and a widespread deep-sea hiatus in the latest Middle Eocene. Late Eocene diatom/silicoflagellate deposition became more concentrated in middle-to-high latitude regions and coastal upwelling regions, particularly in the Pacific Ocean. Tabulation of the first and last occurrences of 132 biostratigraphically-important diatoms suggests increased species turnover during the latest Paleocene to earliest Eocene that may be in part due to a monographic effect. An increasing rate of evolution of new diatom species between ~ 46 and 43 Ma and after ~ 40 Ma coincides respectively with the widespread expansion of diatom deposition in the Atlantic and with an increased pole-to-equator thermal gradient that witnessed the expansion of diatoms in high latitude oceans and coastal upwelling settings.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1997

A120 yr record of widespread contamination from mining of the Iberian pyrite belt

A metal-enriched seawater plume entering the western Mediterranean Sea through the Strait of Gibraltar originates 300 km to the west in the Rio Tinto estuary of southwestern Spain. Mining of Rio Tinto ore, one of the largest metal-rich sulfide deposits in the world, started well before Roman times. Contemporary Rio Tinto waters draining the region are highly acidic (pH 2.5) with dissolved cadmium, zinc, and copper concentrations 10 5 −10 6 times higher than in uncontaminated surface water of the Gulf of Cadiz. Two dated sediment cores from the Spanish continental shelf show that metal inputs to the region increased with the onset of intensive mining activities during the second half of the 19th century. Although the impact of mining may have decreased over the past few decades, the Tinto river and estuary remain highly contaminated.

Geology↗
USGS2019

The 2016 Lamplugh rock avalanche, Alaska: Deposit structures and emplacement dynamics

Supraglacial landslides result from the catastrophic failure of periglacial rock slopes and deposit large volumes of rock and ice onto the glacier surface. The most remarkable features of these landslides are their prominent long flowbands and a high mobility that exceeds that of their counterparts in other environments. Based on field surveys, high-resolution digital elevation models, and continuous seismic data, we show that the emplacement dynamics of the 2016 rock avalanche on Lamplugh Glacier were characterized by two distinct stages. During the first stage, the debris traveled about 5 km from the base of the slope. Clear long-period seismic signals during this stage record strong interactions of the rock avalanche debris with the ground, suggesting dynamic processes such as grain collisions and fragmentation. The second stage was essentially aseismic at long periods and dominated by low-friction sliding at slow deceleration rates. A higher density of flowbands and increased entrainment of snow from the runout path characterize the morphology of this second-stage distal deposition. Around the margins, lobes are offset by up to 400 m along major strike-slip faults, whereas within individual lobes, offsets between flowbands are much less pronounced (0 to < 10 m). The two-stage emplacement model may explain the higher apparent mobility of supraglacial landslides.

Alaska↗
USGS2023

A complex record of last interglacial sea-level history and paleozoogeography, Santa Rosa Island, Channel Islands National Park, California, USA

Studies of marine terraces and their fossils can yield important information about sea level history, tectonic uplift rates, and paleozoogeography, but some aspects of terrace history, particularly with regard to their fossil record, are not clearly understood. Marine terraces are well preserved on Santa Rosa Island, California, and the island is situated near a major marine faunal boundary. Two prominent low-elevation terraces record the ∼80 ka (marine isotope stage [MIS] 5a) and ∼120 ka (MIS 5e) high-sea stands, based on U-series dating of fossil corals and aminostratigraphic correlation to dated localities elsewhere in California and Baja California. Low uplift rates are implied by an interpretation of these ages, along with their elevations. The fossil assemblage from the ∼120 ka (2nd) terrace contains a number of northern, cool-water species, along with several southern, warm-water species, a classic example of what has been called a thermally anomalous fauna. Low uplift rates in the late Pleistocene, combined with glacial isostatic adjustment (GIA) processes, could have resulted in reoccupation of the ∼120 ka (MIS 5e), 2nd terrace during the ∼100 ka (MIS 5c) high-sea stand, explaining the mix of warm-water (∼120 ka?) and cool-water (∼100 ka?) fossils in the terrace deposits. In addition, however, sea surface temperature (SST) variability during MIS 5e may have been a contributing factor, given that Santa Rosa Island is bathed at times by the cold California Current with its upwelling and at other times is subject to El Niño warm waters, evident in the Holocene SST record. Study of an older, high-elevation marine terrace on the western part of Santa Rosa Island shows more obvious evidence of fossil mixing. Strontium isotope ages span a large range, from ∼2.3 Ma to ∼0.91 Ma. These analyses indicate an age range of ∼500 ka at one locality and ∼ 600 ka at another locality, interpreted to be due to terrace reoccupation and fossil reworking. Consideration of elevations and ages here also yield low, long-term uplift rates, which in part explains the potential for terrace reoccupation in the early Pleistocene. In addition, however, early Pleistocene glacial-interglacial cycles were of much shorter duration, linked to the ∼41 ka obliquity cycle of orbital forcing, a factor that would also enhance terrace reoccupation in regions of low uplift rate. It is likely that other Pacific Coast marine terrace localities of early Pleistocene age, in areas with low uplift rates, also have evidence of fossil mixing from these processes, an hypothesis that can be tested in future studies.

California↗
USGS2005

Historical deposition and fluxes of mercury in Narraguinnep Reservoir, southwestern Colorado, USA

Narraguinnep Reservoir has been identified as containing fish with elevated Hg concentrations and has been posted with an advisory recommending against consumption of fish. There are presently no point sources of significant Hg contamination to this reservoir or its supply waters. To evaluate potential historical Hg sources and deposition of Hg to Narraguinnep Reservoir, the authors measured Hg concentrations in sediment cores collected from this reservoir. The cores were dated by the 137Cs method and these dates were further refined by relating water supply basin hydrological records with core sedimentology. Rates of historical Hg flux were calculated (ng/cm 2/a) based on the Hg concentrations in the cores, sediment bulk densities, and sedimentation rates. The flux of Hg found in Narraguinnep Reservoir increased by approximately a factor of 2 after about 1970. The 3 most likely sources of Hg to Narraguinnep Reservoir are surrounding bedrocks, upstream inactive Au-Ag mines, and several coal-fired electric power plants in the Four Corners region. Patterns of Hg flux do not support dominant Hg derivation from surrounding bedrocks or upstream mining sources. There are 14 coal-fired power plants within 320 km of Narraguinnep Reservoir that produce over 80 ?? 106 MWH of power and about 1640 kg-Hg/a are released through stack emissions, contributing significant Hg to the surrounding environment. Two of the largest power plants, located within 80 km of the reservoir, emit about 950 kg-Hg/a. Spatial and temporal patterns of Hg fluxes for sediment cores collected from Narraguinnep Reservoir suggest that the most likely source of Hg to this reservoir is from atmospheric emissions from the coal-fired electric power plants, the largest of which began operation in this region in the late-1960s and early 1970s.

Applied Geochemistry↗
USGS2008

Deciphering the mid-Carboniferous eustatic event in the central Appalachian foreland basin, southern West Virginia, USA

A prominent unconformity, present across shallow shelf areas of the Euramerican paleoequatorial basins, is used to demark the boundary between the Mississippian and Pennsylvanian subsystems. This unconformity, the mid-Carboniferous eustatic event, is generally attributed to a major glacio-eustatic sea-level fall. Although a Mississippian-Pennsylvanian unconformity is recognized throughout most of the Appalachian region, the record of the mid-Carboniferous eustatic event in the structurally deepest part of the basin has been controversial. Based on early reports that suggested the most complete Pennsylvanian section was present in southern West Virginia, various conceptual depositional models postulated continuous sedimentation between the youngest Mississippian Bluestone Formation and the oldest Penn-sylvanian Pocahontas Formation. In contrast, tabular-erosion models envisioned axial drainage systems that evolved in response to changing basin dynamics. These models predicted a Mississippian-Pennsylvanian unconformity. All these models suffered from a lack of biostratigraphic control. The presence of a sub-Pocahontas paleovalley, herein named the Lashmeet paleovalley, has been confirmed in southern West Virginia. The Lashmeet paleovalley was incised over 35 m into Bluestone strata and filled by lithic sands derived from the Appalachian orogen to the northeast and east. The polygenetic Green Valley paleosol complex marks the Bluestone-Pocahontas contact on associated interfluves. Together, these features indicate a substantial period of subaerial exposure and argue strongly in favor of a Mississippian-Pennsylvanian unconformity. Paleontologic data from the Bluestone Formation, including marine invertebrates and conodonts from the marine Bramwell Member and paleofloral data, support a late, but not latest, Arnsbergian age assignment. Marine fossils are not known from the Pocahontas Formation, but macrofloral and palynomorph taxa support a Langsettian age for most of the Poca-hontas. The biostratigraphic, sedimentologic, and paleogeographic data support the presence of an early Pennsylvanian (middle to late Namurian) disconformity in the Appalachian Basin that corresponds to the mid-Carboniferous eustatic event. ?? 2008 Geological Society of America.

Special Paper of the Geological Society of America↗
USGS1998

Seismic or hydrodynamic control of rapid late-Holocene sea-level rises in southern coastal Oregon, USA?

Intertidal stratigraphy has been instrumental in demonstrating the hazard posed by great earthquakes at the Cascadia subduction zone, but inferring an earthquake history from interbedded sequences of peat and mud is complicated by many factors that influence sedimentation and relative sea-level change on both tectonic and nontectonic coasts. Rapid-to-sudden rises in relative sea level marked by sharp contacts between intertidal peat and overlying mud or sand may reflect coseismic coastal subsidence and tsunami deposition or, alternatively, nonseismic hydrodynamic changes in estuaries. Reconnaissance coring at 16 sites in the marshes fringing a narrow, protected tidal inlet of Coos Bay, supplemented by diatom and 14 C analyses at four sites, reveals a stratigraphic record too fragmentary and ambiguous to distinguish seismic from hydrodynamic causes for more than three of the 10 rises in relative sea-level identified. Only three sharp contacts have the wide extent and evidence of substantial (>0.5 m) submergence that distinguish them from similar contacts produced by nonseismic processes. Correlation with stratigraphic sequences at other estuaries shows that the fringing marshes suddenly subsided and were partially buried by tsunami sand during a great plate-boundary earthquake about 300 years ago. Similar contacts were produced by earthquakes about 1500–1800 years ago, and perhaps about 2400–2700 years ago. Other earthquakes with substantially less subsidence may also have occurred, but evidence is too ambiguous to reconstruct a more complete history.

Holocene↗
USGS2004

Holocene reef accretion: southwest Molokai, Hawaii, U.S.A.

Two reef systems off south Molokai, Hale O Lono and Hikauhi (separated by only 10 km), show strong and fundamental differences in modern ecosystem structure and Holocene accretion history that reflect the influence of wave-induced near-bed shear stresses on reef development in Hawaii. Both sites are exposed to similar impacts from south, Kona, and trade-wind swell. However, the Hale O Lono site is exposed to north swell and the Hikuahi site is not. As a result, the reef at Hale O Lono records no late Holocene net accretion while the reef at Hikauhi records consistent and robust accretion over late Holocene time. Analysis and dating of 24 cores from Hale O Lono and Hikauhi reveal the presence of five major lithofacies that reflect paleo-environmental conditions. In order of decreasing depositional energy they are: (1) coral-algal bindstone; (2) mixed skeletal rudstone; (3) massive coral framestone; (4) unconsolidated floatstone; and (5) branching coral framestone-bafflestone. At Hale O Lono, 10 cores document a backstepping reef ranging from ∼ 8,100 cal yr BP (offshore) to ∼ 4,800 cal yr BP (nearshore). A depauperate community of modern coral diminishes shoreward and seaward of ∼ 15 m depth due to wave energy, disrupted recruitment activities, and physical abrasion. Evidence suggests a change from conditions conducive to accretion during the early Holocene to conditions detrimental to accretion in the late Holocene. Reef structure at Hikauhi, reconstructed from 14 cores, reveals a thick, rapidly accreting and young reef (maximum age ∼ 900 cal yr BP). Living coral cover on this reef increases seaward with distance from the reef crest but terminates at a depth of ∼ 20 m where the reef ends in a large sand field. The primary limitation on vertical reef growth is accommodation space under wave base, not recruitment activities or energy conditions. Interpretations of cored lithofacies suggest that modern reef growth on the southwest corner of Molokai, and by extension across Hawaii in general, is controlled by wave-induced near-bed shear stress related to refracted North Pacific swell. Holocene accretion patterns here also reflect the long-term influence of wave-induced near-bed shear stress from north swell during late Holocene time. This finding is consistent with other studies (e.g., Grigg 1998; Cabioch et al. 1999) that reflect the dominance of swell energy and sea level in controlling modern and late Holocene accretion elsewhere in Hawaii and across the Pacific and Indian oceans. Notably, however, this result is refined and clarified for Hawaii in the hypothesis of Rooney et al. (2003) stating that enhancement of the El Niño Southern Oscillation beginning approximately 5000 years ago led to increased north swell energy and signaled the end to net accretion along exposed coastlines in Hawaii. The exposure of Hale O Lono to north swell and the age of sea floor there (ca. 4,800 cal yr BP), coupled with the lack of north swell incidence at Hikauhi and the continuous accretion that has occurred there over the last millennium, strongly supports the ENSO reef hypothesis as outlined by Rooney et al. (2003). Other factors controlling Holocene reef accretion at the study site are relative sea-level position and rate of rise, and wave sheltering by Laau Point. Habitat suitable for reef accretion on the southwest shore of Molokai has shrunk throughout the Holocene.

Hawai'i↗
USGS2010

Attributes for MRB_E2RF1 Catchments by Major River Basins in the Conterminous United States: Normalized Atmospheric Deposition for 2002, Total Inorganic Nitrogen

This tabular data set represents the average normalized atmospheric (wet) deposition, in kilograms per square kilometer multiplied by 100, of Total Inorganic Nitrogen for the year 2002 compiled for every MRB_E2RF1 catchment of selected Major River Basins (MRBs, Crawford and others, 2006). Estimates of Total Inorganic Nitrogen deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written. commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The MRB_E2RF1 catchments are based on a modified version of the U.S. Environmental Protection Agency's (USEPA) ERF1_2 and include enhancements to support national and regional-scale surface-water quality modeling (Nolan and others, 2002; Brakebill and others, 2011). Data were compiled for every MRB_E2RF1 catchment for the conterminous United States covering New England and Mid-Atlantic (MRB1), South Atlantic-Gulf and Tennessee (MRB2), the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy (MRB3), the Missouri (MRB4), the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf (MRB5), the Rio Grande, Colorado, and the Great basin (MRB6), the Pacific Northwest (MRB7) river basins, and California (MRB8).

Data Series↗
USGS2010

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: Normalized Atmospheric Deposition for 2002, Ammonium (NH4)

This data set represents the average normalized atmospheric (wet) deposition, in kilograms, of Ammonium (NH4) for the year 2002 compiled for every catchment of NHDPlus for the conterminous United States. Estimates of NH4 deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗
USGS2010

Attributes for NHDPlus Catchments (Version 1.1) for the Conterminous United States: Normalized Atmospheric Deposition for 2002, Nitrate (NO3)

This data set represents the average normalized atmospheric (wet) deposition, in kilograms, of Nitrate (NO3) for the year 2002 compiled for every catchment of NHDPlus for the conterminous United States. Estimates of NO3 deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗
USGS2010

Attributes for NHDPlus catchments (version 1.1) for the conterminous United States: normalized atmospheric deposition for 2002, Total Inorganic Nitrogen

This data set represents the average normalized atmospheric (wet) deposition, in kilograms, of Total Inorganic Nitrogen for the year 2002 compiled for every catchment of NHDPlus for the conterminous United States. Estimates of Total Inorganic Nitrogen deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The NHDPlus Version 1.1 is an integrated suite of application-ready geospatial datasets that incorporates many of the best features of the National Hydrography Dataset (NHD) and the National Elevation Dataset (NED). The NHDPlus includes a stream network (based on the 1:100,00-scale NHD), improved networking, naming, and value-added attributes (VAAs). NHDPlus also includes elevation-derived catchments (drainage areas) produced using a drainage enforcement technique first widely used in New England, and thus referred to as "the New England Method." This technique involves "burning in" the 1:100,000-scale NHD and when available building "walls" using the National Watershed Boundary Dataset (WBD). The resulting modified digital elevation model (HydroDEM) is used to produce hydrologic derivatives that agree with the NHD and WBD. Over the past two years, an interdisciplinary team from the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agency (USEPA), and contractors, found that this method produces the best quality NHD catchments using an automated process (USEPA, 2007). The NHDPlus dataset is organized by 18 Production Units that cover the conterminous United States. The NHDPlus version 1.1 data are grouped by the U.S. Geologic Survey's Major River Basins (MRBs, Crawford and others, 2006). MRB1, covering the New England and Mid-Atlantic River basins, contains NHDPlus Production Units 1 and 2. MRB2, covering the South Atlantic-Gulf and Tennessee River basins, contains NHDPlus Production Units 3 and 6. MRB3, covering the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins, contains NHDPlus Production Units 4, 5, 7 and 9. MRB4, covering the Missouri River basins, contains NHDPlus Production Units 10-lower and 10-upper. MRB5, covering the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins, contains NHDPlus Production Units 8, 11 and 12. MRB6, covering the Rio Grande, Colorado and Great Basin River basins, contains NHDPlus Production Units 13, 14, 15 and 16. MRB7, covering the Pacific Northwest River basins, contains NHDPlus Production Unit 17. MRB8, covering California River basins, contains NHDPlus Production Unit 18.

Data Series↗
USGS2010

Attributes for MRB_E2RF1 Catchments by Major River Basins in the Conterminous United States: Normalized Atmospheric Deposition for 2002, Ammonium (NH4)

This tabular data set represents the average normalized (wet) deposition, in kilograms per square kilometer multiplied by 100, of ammonium (NH4) for the year 2002 compiled for every MRB_E2RF1 catchment of the Major River Basins (MRBs, Crawford and others, 2006). Estimates of NH4 deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written. commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The MRB_E2RF1 catchments are based on a modified version of the U.S. Environmental Protection Agency's (USEPA) ERF1_2 and include enhancements to support national and regional-scale surface-water quality modeling (Nolan and others, 2002; Brakebill and others, 2011). Data were compiled for every MRB_E2RF1 catchment for the conterminous United States covering New England and Mid-Atlantic (MRB1), South Atlantic-Gulf and Tennessee (MRB2), the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy (MRB3), the Missouri (MRB4), the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf (MRB5), the Rio Grande, Colorado, and the Great basin (MRB6), the Pacific Northwest (MRB7) river basins, and California (MRB8).

Data Series↗
USGS2010

Attributes for MRB_E2RF1 Catchments by Major River Basins in the Conterminous United States: Normalized Atmospheric Deposition for 2002, Nitrate (NO3)

This tabular data set represents the average normalized (wet) deposition, in kilograms per square kilometer multiplied by 100, of Nitrate (NO3) for the year 2002 compiled for every MRB_E2RF1 catchment of the Major River Basins (MRBs, Crawford and others, 2006). Estimates of NO3 deposition are based on National Atmospheric Deposition Program (NADP) measurements (B. Larsen, U.S. Geological Survey, written. commun., 2007). De-trending methods applied to the year 2002 are described in Alexander and others, 2001. NADP site selection met the following criteria: stations must have records from 1995 to 2002 and have a minimum of 30 observations. The MRB_E2RF1 catchments are based on a modified version of the U.S. Environmental Protection Agency's (USEPA) ERF1_2 and include enhancements to support national and regional-scale surface-water quality modeling (Nolan and others, 2002; Brakebill and others, 2011). Data were compiled for every MRB_E2RF1 catchment for the conterminous United States covering New England and Mid-Atlantic (MRB1), South Atlantic-Gulf and Tennessee (MRB2), the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy (MRB3), the Missouri (MRB4), the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf (MRB5), the Rio Grande, Colorado, and the Great basin (MRB6), the Pacific Northwest (MRB7) river basins, and California (MRB8).

Data Series↗
USGS2005

Sediment-transport investigations of the upper Yellowstone River, Montana, 1999 through 2001: Data collection, analysis, and simulation of sediment transport

The upper Yellowstone River in Montana is an important State and national water resource, providing recreational, agricultural, and commercial benefits. Floods in 1996 and 1997, with recorded peak discharges having recurrence intervals close to 100 years, caused substantial streambank erosion and hill- slope mass wasting. Large quantities of sand-, gravel-, and cobble-sized material entrained by the flood flows became flood-bar deposits, creating a source of sediment available for transport during future floods. The flood damage and resulting sedimentation raised concerns about potential streambank-stabilization projects and how the river and riparian corridor might be managed in the future. The U.S. Geological Survey, in cooperation with the Park Conservation District, the Montana Department of Transportation, and the U.S. Army Corps of Engineers, investigated sediment transport in the upper Yellowstone River near Livingston from 1999 through 2001 as part of a cumulative effects study to provide a scientific basis for future river management decisions. The purpose of this report is to present the results of data collection, analysis, and simulation of sediment transport for the upper Yellowstone River. The study area included a 13.5-mile study reach of the upper Yellowstone River where substantial sediment transport occurred in 1996 and 1997. In this study area, the upper Yellowstone River is a high gradient, coarse-bed stream having a slope of about 0.0028 foot per foot or more than 14 feet per mile. The study area drains about 3,551 square miles, and runoff results primarily from snowmelt during the spring and summer months. As part of sediment-transport investigations, the U.S. Geological Survey surveyed river cross sections, characterized streambed-material particle size using particle counts and sieve analyses, and collected bedload- and suspended-sediment data during three runoff seasons (1999-2001). Data were collected for stream discharges that ranged from 2,220 cubic feet per second (typical of pre- and post-runoff discharge) to 25,100 cubic feet per second (about 125 percent of bankfull discharge). The distribution of streambed-material particle size was determined, and sediment-transport curves for bedload discharge, suspended-sediment discharge, and total-sediment discharge were developed. The threshold values of streamflow and average stream velocity needed for initiation of bedload transport for selected sediment-size classes showed that little to no bedload was transported for an average stream velocity below about 3 feet per second, and the only particle size transported as bedload at that velocity was sand. Over the range of stream discharges sampled and with silt- and finer-sized particles excluded, bedload discharge averaged about 18 percent of the total-sediment discharge, equal to bedload discharge plus suspended-sediment discharge. At the lowest and highest stream discharges sampled, bedload was, respectively, less than about 2 percent and about 30 percent of the total-sediment discharge. Over the range of stream discharges sampled, the sand-sized part of the total suspended-sediment discharge averaged about 48 percent, where the total suspended-sediment discharge included sand-, silt- and finer-sized particles. At the lowest and highest stream discharges sampled, the sand-sized part of the total suspended-sediment discharge was, respectively, less than about 16 percent and about 50 percent of the total suspended-sediment discharge. The sediment-transport curves were compared to curves for selected sites in the western United States having drainage areas ranging from 21 square miles to over 20,000 square miles. Daily sediment loads transported at bankfull discharge were calculated for each site and results were plotted in relation to drainage area. Results based on the 1999-2001 data-collection period indicate that the estimated daily bedload transported at bankfull discharge in the upper Yellowstone River exceeded the envelope line that bounds the upper end of the data for other selected sites in the Northern Rocky Mountains and is similar in magnitude to that for selected sites in Alaska having braided channels and glacial and snowmelt runoff. Similar comparisons for suspended sediment indicate that daily suspended-sediment load at bankfull discharge is relatively high in the upper Yellowstone River, plotting slightly above the envelope line that bounds the upper end of the data for other selected sites in the Northern Rocky Mountains. Sediment data were used to develop individual transport equations for seven size classes of sediment ranging from small cobbles to very fine sand. A step-wise regression procedure relating sediment discharge to important hydraulic variables showed that average stream velocity was the only significant variable at the 95-percent confidence level. Bedload and suspended-sediment data and equations indicate that more sand is transported for a given velocity than any other particle size, and very little sand-size sediment load is transported below an average stream velocity of about 2.5 feet per second. Transport of coarser-sized sediment (limited to bedload) becomes very little for an average velocity less than about 3.5 feet per second. Results for the 1999-2001 data-collection period indicate that sediment transport in the upper Yellowstone River tends to be limited more by the transport capacity of the stream (capacity or transport limited), than to the availability of sediment in the watershed (supply limited). Sediment data collected and analyzed were used to simulate sediment transport in the study reach using the BRIdge Stream Tube model for Alluvial River Simulation, or BRI-STARS computer model. The model was calibrated and verified using selected data from historical runoff periods. Simulated total-sediment loads, on a reach-averaged basis, were in good agreement with the total-sediment loads determined from the transport curve for the 2-year flood hydrograph but were considerably smaller for the total-sediment loads determined from the transport curve for the 50-, 100-, and 500-year flood hydrographs. The differences probably were largely due to the inability of the model to simulate streambank erosion, hillslope mass-wasting, and other channel-widening processes, which had supplied substantial quantities of sediment to the channel during the 1996 and 1997 floods, and probably continued to contribute to the sediment load in the subsequent years (1999-2001) when the data were collected. Furthermore, the transport curve was applied beyond the measured data for the highest discharges, and may thus be unreliable. Also, the transport curve derived from only limited data may not apply over the full duration of the hydrograph and sediment might be transported over only a portion of the hydrograph, especially for rivers like the upper Yellowstone where snowmelt runoff predominates. The true sediment discharge is, therefore, unknown and might be closer to the simulated values than to the values calculated from the transport curve.

Montana↗
USGS1994

Development and application of generalized-least-squares regression models to estimate low-flow duration discharges in Massachusetts

Physically based mathematical models were developed by use of generalized-least-squares regression analyses to estimate long-term 95-, 98-, and 99-percent duration discharges for ungaged streams in Massachusetts. Duration discharges for 61 sites were used in the recession analyses; 37 sites were streamflow-gaging stations and 24 sites were low-flow partial-record stations. The duration discharges were related to basin chacteristics measured from digital data bases, by use of geographic information systems computer software. Significant chacterisfics used in the models were drainage area, area underlain by stratified-drift deposits per unit of stream length in the basin, and a surrogate for the effective head on the aquifer in the stratified-drift deposits, computed by subtracting the minimum basin elevation from the mean basin elevation. Standard errors of prediction were 57.5, 85.6, and 98.5 percent for models for the 95-, 98-, and 99-percent duration discharges, respectively. Model error variances were about 10 times the sampling error variances, indicating that the precision of future models are likely to be improved more by obtaining better measurements of basin characteristics or by adding new sites to the analyses than by collecting more streamflow data at the sites presently used in the analyses. The models were used to predict duration discharges for 35 selected sites in the Concord River, Noah Coastal, South Coastal, Narragansett and Tenmile River Basins. Ninety-perrcent prediction intervals were computed for the estimates at each of the sites, except at sites where values of the independent variables were outside the ranges of those for the sites used in the regression analyses.

Water-Resources Investigations Report↗
USGS2003

Lead in the Getchell-Turquoise ridge Carlin-type gold deposits from the perspective of potential igneous and sedimentary rock sources in Northern Nevada: Implications for fluid and metal sources

Lead isotope compositions of bulk mineral samples (fluorite, orpiment, and realgar) determined using conventional techniques and of ore-stage arsenian pyrite using the Sensitive High Resolution Ion-Microprobe (SHRIMP) in the Getchell and Turquoise Ridge Carlin - type gold deposits (Osgood Mountains) require contribution from two different Pb sources . One Pb source dominates the ore stage. It has a limited Pb isotope range characterized by 208 Pb/ 206 Pb values of 2.000 to 2.005 and 207 Pb/ 206 Pb values of 0.8031 to 0.8075, as recorded by 10-μm-diameter spot SHRIMP analyses of ore-stage arsenian pyrite. These values approximately correspond to 206 Pb/ 204 Pb of 19.3 to 19.6, 207 Pb/ 204 Pb of 15.65 to 15.75, and 208 Pb/ 204 Pb of 39.2 to 39.5. This Pb source is isotopically similar to that in average Neoproterozoic and Cambrian elastic rocks but not to any potential magmatic sources . Whether those clastic rocks provided Pb to the ore fluid cannot be unequivocally proven because their Pb isotope compositions over the same range as in ore-stage arsenian pyrite are similar to those of Ordovician to Devonian siliciclastic and calcareous rocks. The Pb source in the calcareous rocks most likely is largely detrital minerals, since that detritus was derived from the same sources as the detritus in the Neoproterozoic and Cambrian clastic rocks. The second Pb source is characterized by a large range of 206 Pb/ 204 Pb values (18-34) with a limited range of 208 Pb/ 204 Pb values (38.1-39.5), indicating low but variable Th/U and high and variable U/Pb values. The second Pb source dominates late and postore-stage minerals but is also found in preore sulfide minerals. These Pb isotope characteristics typify Ordovician to Devonian siliciclastic and calcareous rocks around the Carlin trend in northeast Nevada . Petrologically similar rocks host the Getchell and Turquoise Ridge deposits . Lead from the second source was either contributed from the host sedimentary rock sequences or brought into the hydrothermal system by oxidized ground water as the system collapsed. Late ore- and postore-stage sulfide minerals (pyrite, orpiment, and stibnite) from the Betze-Post and Meikle deposits in the Carlin trend and from the Jerritt Canyon mining district have Pb isotope characteristics similar to those determined in Getchell and Turquoise Ridge . This observation suggests that the Pb isotope compositions of their ore fluids may be similar to those at Getchell and Turquoise Ridge . Two models can explain the Pb isotope compositions of the ore-stage arsenian pyrite versus the late ore or postore sulfide minerals. In either model, Pb from the Ordovician to Devonian siliciclastic and calcareous rock source enters the hydrothermal system late in the ore stage but not to any extent during the main stage of ore deposition. In one model, ore-stage Pb was derived from a source with Pb isotope compositions similar to those of the Neoproterozoic and Cambrian clastic sequence, transported as part of the ore fluid and then deposited in the ore-stage arsenian pyrite and fluorite. The second model is based on the observation that the Pb isotope characteristics of the ore-stage minerals also are found in some Ordovician to Devonian calcareous and siliciclastic rocks. Hence, ore-stage Pb could have been derived locally and simply concentrated during the ore stage. Critical to the second model is the removal of all high 206 Pb/ 204 Pb (>20) material during alteration. It Also requires the retention of only the low 206 Pb/ 204 Pb component of the Ordovician to Devonian sedimentary rocks. This critical step is possible only if the high 206 Pb/ 204 Pb values are contained in readily dissolvable mineral phases, whereas the low 206 Pb/ 204 Pb values are found only in refractory minerals that released Pb during a final alteration stage just prior deposition of auriferous arsenian pyrite. Distinguishing between Pb transported with the ore fluid or inherited from the site of mineral deposition is not straightforward; however, it is simpler to explain the Pb isotope compositions of ore-stage arsenian pyrite and fluorite in two different but spatially related Carlin - type deposits ( Getchell and Turquoise Ridge ) with different host rocks by input of Pb with the ore fluid . Once the limited Pb in the hydrothermal fluid was exhausted by incorporation in ore-stage arsenian pyrite or other ore-stage minerals, Pb from the second source , the Ordovician to Devonian sedimentary rock sequences, became available for incorporation in some but not all of the late-stage sulfide minerals.

Nevada↗