USGS Science⌕ Search

SEARCH · USGS Science

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources

Induced-polarization surveys applied to exploration for roll-front uranium deposits

This open-file report summarizes the oral presentation given at the 45th Annual Meeting of the Society of Exploration Geophysicists. The data analysis given here is brief because of time limitations imposed at the meeting. A more detailed analysis of the data (both geological and geophysical) will be given in subsequent publications. Our oral presentation was preceded by one given by Jeffrey Daniels and James Scott entitled "Borehole Investigations of South Texas Uranium Deposits." Statements made in their presentation that are pertinent to this report are as follows: (1) a Tertiary sandstone is the host for the South Texas uranium occurrence, (2) the roll-front geometry is similar to those found in Wyoming, and (3) the roll-front does not occur at a visually obvious change from reduced to oxidized environments. A careful comparison of the IP (induced polarization) borehole logs and lithology revealed the following general points: (1) the largest IP response logged in the boreholes occurred at the uranium roll-front, and (2) the IP response can be correlated with percentage pyrite and with variations in the percentage and type of clay present. The IP measurements reported here were made with a time-domain Huntec IP receiver. The transmitted wave-form had a two-second on-and-off period. Four windows were measured during the off-time. The second window, M2, which is given here, has a window duration of 130 milliseconds from 50 to 130 milliseconds. IP coupling is inferred not to be a serious problem in the survey data reported here, because the variations in M measurements are the same as those seen for the2 window of longest delay and length. The data presented herein are part of a broad data set which the U.S. Geological Survey has gathered on surface geophysical methods. Other people who have been involved in the data collection, interpretation, and presentation are John Cady, David Campbell, Ralph Corken, Richard Meyer, Louis O'Connor, Tommas Nash, and James Scott.

Open-File Report↗

Integrated geophysical imaging of a concealed mineral deposit: a case study of the world-class Pebble porphyry deposit in southwestern Alaska

We combined aeromagnetic, induced polarization, magnetotelluric, and gravity surveys as well as drillhole geologic, alteration, magnetic susceptibility, and density data for exploration and characterization of the Cu-Au-Mo Pebble porphyry deposit. This undeveloped deposit is almost completely concealed by postmineralization sedimentary and volcanic rocks, presenting an exploration challenge. Individual geophysical methods primarily assist regional characterization. Positive chargeability and conductivity anomalies are observed over a broad region surrounding the deposit, likely representing sulfide minerals that accumulated during multiple stages of hydrothermal alteration. The mineralized area occupies only a small part of the chargeability anomaly because sulfide precipitation was not unique to the deposit, and mafic rocks also exhibit strong chargeability. Conductivity anomalies similarly reflect widespread sulfides as well as water-saturated glacial sediments. Mineralogical and magnetic susceptibility data indicate magnetite destruction primarily within the Cu-Au-Mo mineralized area. The magnetic field does not show a corresponding anomaly low but the analytic signal does in areas where the deposit is not covered by postmineralization igneous rocks. The analytic signal shows similar lows over sedimentary rocks outside of the mineralized area, however, and cannot uniquely distinguish the deposit. We find that the intersection of positive chargeability anomalies with analytic signal lows, indicating elevated sulfide concentrations but low magnetite at shallow depths, roughly delineates the deposit where it is covered only by glacial sediments. Neither chargeability highs nor analytic signal lows are present where the deposit is covered by several hundred meters of sedimentary and volcanic rocks, but a 3D resistivity model derived from magnetotelluric data shows a corresponding zone of higher conductivity. Gravity data highlight geologic features within the deposit, including shallow diorite sills that locally contain higher-grade mineralization. The results thus show ways in which an integrated survey approach might be used to distinguish zones of potentially economic mineralization.

Alaska↗

Bathymetric, geophysical and geologic sample data from Medicine Lake, Siskiyou County, northern California

In September, 1999, the U.S. Geological Survey acquired high-resolution bathymetry, seismic reflection profiles, and geologic sample data from Medicine Lake, a high altitude (2,036 m) lake located within the summit caldera/basin at Medicine Lake volcano (MLV), a dormant Quaternary shield volcano located in the Cascade Range, 50 km northeast of Mt. Shasta. It last erupted less than 1000 years ago.The purpose of this work was to assess whether sediments in the lake might provide a high-resolution record of the climate, volcanic and geochemical (particularly mercury) history of the region. We are still working with our data to assess whether the sediments are appropriate for further study. This report provides a summary of what we have learned to date.

California↗

Borehole geophysical data for the East Poplar oil field area, Fort Peck Indian Reservation, northeastern Montana, 1993, 2004, and 2005

Areas of high electrical conductivity in shallow aquifers in the East Poplar oil field area were delineated by the U.S. Geological Survey (USGS), in cooperation with the Fort Peck Assiniboine and Sioux Tribes, in order to interpret areas of saline-water contamination. Ground, airborne, and borehole geophysical data were collected in the East Poplar oil field area from 1992 through 2005 as part of this delineation. This report presents borehole geophysical data for thirty-two wells that were collected during 1993, 2004, and 2005 in the East Poplar oil field study area. Natural-gamma and induction instruments were used to provide information about the lithology and conductivity of the soil, rock, and water matrix adjacent to and within the wells. The well logs were also collected to provide subsurface controls for interpretation of a helicopter electromagnetic survey flown over most of the East Poplar oil field in 2004. The objective of the USGS studies was to improve understanding of aquifer hydrogeology particularly in regard to variations in water quality.

Montana↗

Sea floor topography and backscatter intensity of the Hudson Canyon region offshore of New York and New Jersey

These maps show the sea floor topography and backscatter intensity of the Hudson Canyon region on the continental slope and rise offshore of New Jersey and New York (fig. 1 and fig. 2). Sheet 1 shows sea floor topography as shaded relief. Sheet 2 shows sea floor topography as shaded relief with backscatter intensity superimposed in color. Both sheets are at a scale of 1:300,000 and also show smoothed topographic contours at selected intervals. The maps are based on new multibeam echo-sounder data collected on an 18-day cruise carried out aboard the National Oceanic and Atmospheric Administration (NOAA) Ship Ronald H. Brown during August and September 2002. Additional multibeam data of the Hudson Canyon collected by the Woods Hole Oceanographic Institution (WHOI), on the continental shelf collected by the STRATAFORM project (Goff and others, 1999), and a survey of the Hudson Shelf Valley (Butman and others, 2003), and a compilation of bathymetric data from the National Geophysical Data Center (NGDC) Coastal Relief Model provide coverage of areas surrounding Hudson Canyon (fig. 2). Interpretations of the surficial geology also utilize widely spaced 3.5- and 10-kiloHertz (kHz) high-resolution seismic profiles collected by the U.S. Geological Survey (fig.2).

New Jersey, New York↗

Evaluating success criteria and project monitoring in river enhancement within an adaptive management framework

Objective setting, performance measures, and accountability are important components of an adaptive-management approach to river-enhancement programs. Few lessons learned by river-enhancement practitioners in the United States have been documented and disseminated relative to the number of projects implemented. We conducted scripted telephone surveys with river-enhancement project managers and practitioners within the Upper Mississippi River Basin (UMRB) to determine the extent of setting project success criteria, monitoring, evaluation of monitoring data, and data dissemination. Investigation of these elements enabled a determination of those that inhibited adaptive management. Seventy river enhancement projects were surveyed. Only 34% of projects surveyed incorporated a quantified measure of project success. Managers most often relied on geophysical attributes of rivers when setting project success criteria, followed by biological communities. Ninety-one percent of projects that performed monitoring included biologic variables, but the lack of data collection before and after project completion and lack of field-based reference or control sites will make future assessments of ecologic success difficult. Twenty percent of projects that performed monitoring evaluated ???1 variable but did not disseminate their evaluations outside their organization. Results suggest greater incentives may be required to advance the science of river enhancement. Future river-enhancement programs within the UMRB and elsewhere can increase knowledge gained from individual projects by offering better guidance on setting success criteria before project initiation and evaluation through established monitoring protocols. ?? 2007 Springer Science+Business Media, LLC.

Environmental Management↗

Mineral resources map of the McCarthy Quadrangle, Alaska

The mineral resources map is an assessment of the occurrence of mineral deposits in the McCarthy quadrangle by area and type of deposit. Descriptions of known mineral deposits and occurrences in the quadrangle provided by MacKevett (1976b) should be used in conjunction with this map. Areas enclosing both known deposits and areas favorable for unfound deposits are delineated in the mineral resources map. Types of deposits known to be widely scattered throughout the quadrangle, such as placer gold, and types with only a slight chance of being in the quadrangle are not delineated. Selection of favorable areas was based on occurrences of known deposits and geologic, geophysical, geochemical, and earth satellite data presented in the McCarthy folio (U.S. Geol. Survey MF maps 773A, B, D-N and Circular 739) and some additional geochemical data published in open-file form (O'Leary and others, 1976). Delineation of boundaries was made by the informed judgment of the team members, but final responsibility rests with the authors of this map.

Alaska↗

Modeling GPR data to interpret porosity and DNAPL saturations for calibration of a 3-D multiphase flow simulation

Dense nonaqueous phase liquids (DNAPLs) are a pervasive and persistent category of groundwater contamination. In an effort to better understand their unique subsurface behavior, a controlled and carefully monitored injection of PCE (perchloroethylene), a typical DNAPL, was performed in conjunction with the University of Waterloo at Canadian Forces Base Borden in 1991. Of the various geophysical methods used to monitor the migration of injected PCE, the U.S. Geological Survey collected 500-MHz ground penetrating radar (GPR) data. These data are used in determining calibration parameters for a multiphase flow simulation. GPR data were acquired over time on a fixed two-dimensional surficial grid as the DNAPL was injected into the subsurface. Emphasis is on the method of determining DNAPL saturation values from this time-lapse GPR data set. Interactive full-waveform GPR modeling of regularized field traces resolves relative dielectric permittivity versus depth profiles for pre-injection and later-time data. Modeled values are end members in recursive calculations of the Bruggeman-Hanai-Sen (BHS) mixing formula, yielding interpreted pre-injection porosity and post-injection DNAPL saturation values. The resulting interpreted physical properties of porosity and DNAPL saturation of the Borden test cell, defined on a grid spacing of 50 cm with 1-cm depth resolution, are used as observations for calibration of a 3-D multiphase flow simulation. Calculated values of DNAPL saturation in the subsurface at 14 and 22 hours after the start of injection, from both the GPR and the multiphase flow modeling, are interpolated volumetrically and presented for visual comparison.

Open-File Report↗

Topobathymetric data for Tampa Bay, Florida

Topobathymetric data (“topobathy”) are a merged rendering of both topography (land elevation) and bathymetry (water depth) to provide a single product useful for inundation mapping and a variety of other applications. These data were developed using one topographic and two bathymetric datasets collected at different dates. Topography was obtained from the U.S. Geological Survey's (USGS) National Elevation Dataset (NED). Bathymetry was provided by NOAA's GEOphysical DAta System (GEODAS). For several nearshore areas within the bay GEODAS data were replaced with high resolution bathymetry acquired by NASA's Experimental Advanced Airborne Research Lidar (EAARL).

Florida↗

Selected borehole geophysical logs and drillers' logs, northern coastal plain of New Jersey

This report presents lithologic data compiled during the initial phase of a cooperative study by the U.S. Geological Survey and the New Jersey Department of Environmental Protection, Division of Water Resources to assess the hydrogeology of the Potomac-Raritan-Magothy aquifer system in the northern Coastal Plain of New Jersey. The report includes 109 geophysical logs and 328 drillers ' logs that were selected as representative of the Potomac-Raritan-Magothy aquifer system. A description of the Potomac-Raritan-Magothy aquifer system also is give. (USGS)

Open-File Report↗

Applications of geophysical methods to volcano monitoring

The array of geophysical technologies used in volcano hazards studies - some developed originally only for volcano monitoring - ranges from satellite remote sensing including InSAR to leveling and EDM surveys, campaign and telemetered GPS networks, electronic tiltmeters and strainmeters, airborne magnetic and electromagnetic surveys, short-period and broadband seismic monitoring, even microphones tuned for infrasound. They include virtually every method used in resource exploration except large-scale seismic reflection. By “geophysical ” we include both active and passive methods as well as geodetic technologies. Volcano monitoring incorporates telemetry to handle high-bandwith cameras and broadband seismometers. Critical geophysical targets include the flux of magma in shallow reservoir and lava-tube systems, changes in active hydrothermal systems, volcanic edifice stability, and lahars. Since the eruption of Mount St. Helens in Washington State in 1980, and the eruption at Pu’u O’o in Hawai’i beginning in 1983 and still continuing, dramatic advances have occurred in monitoring technology such as “crisis GIS” and lahar modeling, InSAR interferograms, as well as gas emission geochemistry sampling, and hazards mapping and eruption predictions. The on-going eruption of Mount St. Helens has led to new monitoring technologies, including advances in broadband Wi-Fi and satellite telemetry as well as new instrumentation. Assessment of the gap between adequate monitoring and threat at the 169 potentially dangerous Holocene volcanoes shows where populations are dangerously exposed to volcanic catastrophes in the United States and its territories . This paper focuses primarily on Hawai’ian volcanoes and the northern Pacific and Cascades volcanoes. The US Geological Survey, the US National Park System, and the University of Utah cooperate in a program to monitor the huge Yellowstone volcanic system, and a separate observatory monitors the restive Long Valley caldera in collaboration with the US Forest Service.

Conference Paper↗

Marine geophysical data collected in a shallow back-barrier estuary, Barnegat Bay, New Jersey

In 2011, the U.S. Geological Survey, in cooperation with the New Jersey Department of Environmental Protection, began a multidisciplinary research project to better understand the water quality in Barnegat Bay, New Jersey. This back-barrier estuary is experiencing degraded water quality, algal blooms, loss of seagrass, and increases in oxygen stress, macroalgae, stinging nettles, and brown tide. The spatial scale of the estuary and the scope of challenges within it necessitate a multidisciplinary approach that includes establishing the regional geology and the estuary’s physical characteristics and modeling how the estuary’s morphology interacts to affect its water quality. This report presents the data collected during this project for use in understanding the morphology and the distribution of sea-floor and sub-sea-floor sediments within Barnegat Bay, describes the methods used to collect and process those data, and includes links to the final processed datasets. These data can be used by scientists to understand the links between geomorphology, geologic framework, sediment transport, and estuarine water quality and circulation.

New Jersey↗

Digital geologic and geophysical data of Bangladesh

This CD-ROM was compiled according to the methodology developed by the U.S. Geological Survey's World Energy Project . The goal of the project was to assess the undiscovered, technically recoverable oil and gas resources of the world and report these results by the year 2000. A worldwide series of geologic maps, published on CD-ROMs, was released by the U.S. Geological Survey's World Energy Project during 1997 - 2000. Specific details of the data sources and map compilation are given in the metadata files on this CD-ROM. These maps were compiled using Environmental Systems Research Institute Inc. (ESRI) ARC/INFO software. Political boundaries and cartographic representations on this map are with permission from ESRI's ArcWorld 1:3M digital coverage: they have no political significance and are displayed as general reference only. Portions of this database covering the coastline and country boundaries contain proprietary property of ESRI. (© 1992 and 1996, Environmental Systems Research Institute Inc. All rights reserved.)

Open-File Report↗

Results of the application of seismic-reflection and electromagnetic techniques for near-surface hydrogeologic and environmental investigations at Fort Bragg, North Carolina

As part of the U.S. Geological Survey's Resource Conservation and Recovery Act, Facilities Investigations at Fort Bragg, North Carolina, selected geophysical techniques were evaluated for their usefulness as assessment tools for determining subsurface geology, delineating the areal extent of potentially contaminated landfill sites, and locating buried objects and debris of potential environmental concern. Two shallow seismic-reflection techniques (compression and shear wave) and two electromagnetic techniques (ground-penetrating radar and terrain conductivity) were evaluated at several sites at the U.S. Army Base. The electromagnetic techniques also were tested for tolerance to cultural noise, such as nearby fences, vehicles, and power lines. For the terrain conductivity tests, two instruments were used--the EM31 and EM34, which have variable depths of exploration. The shallowest reflection event was 70 feet below land surface observed in common-depth point, stacked compression-wave data from 24- and 12-fold shallow-seismic-reflection surveys. Several reflection events consistent with clay-sand interfaces between 70 and 120 feet below land surface, along with basement-saprolite surfaces, were imaged in the 24-fold, common- depth-point stacked data. 12-fold, common-depth-point stacked data set contained considerably more noise than the 24-fold, common-depth-point data, due to reduced shot-to-receiver redundancy. Coherent stacked reflection events were not observed in the 24-fold, common-depth-point stacked shear-wave data because of the partial decoupling of the shear- wave generator from the ground. At one site, ground-penetrating radar effectively delineated a shallow, 2- to 5-foot thick sand unit bounded by thin (less than 1 foot) clay layers. The radar signal was completely attenuated where the overlying and underlying clay units thickened and the sand unit thinned. The pene- tration depth of the radar signal was less than 10 feet below land surface. A slight increase in electromagnetic conductivity across shallow sampling EM31 and EM34 profiles provided corroborative evidence of the shallow, thickening clay units. Plots of raw EM31 and EM34 data provided no direct interpretable information to delineate sand and clay units in the shallow subsurface. At two sites, the ground-penetrating radar effectively delineated the lateral continuity of surficial sand units 5 to 25 feet in thickness and the tops of their underlying clay units. The effective exploration depth of the ground-penetrating radar was limited by the proximity of clay units to the subsurface and their thickness. The ground-penetrating radar delineated the areal extent and depth of cover at a previously unrecognized extension of a trench-like landfill underlying a vehicle salvage yard. Attenuation of the radar signal beneath the landfill cover and the adjacent subsurface clays made these two mediums indistinguishable by ground-penetrating radar; however, EM31 data indicated that the electrical conductivity of the landfill was higher than the subsurface material adjacent to the landfill. The EM31 and EM34 conductivity surveys defined the areal extent of a landfill whose boundaries were inaccurately mapped, and also identified the locations of an old dumpsite and waste incinerator site at another landfill. A follow-up ground-penetrating radar survey of the abandoned dumpsite showed incongruities in some of the shallow radar reflections interpreted as buried refuse dispersed throughout the landfill. The ground-penetrating radar and EM31 effectively delineated a shallow buried fuel-oil tank. Of the three electromagnetic instruments, the ground-penetrating radar with the shielded 100-megahertz antenna was the least affected by cultural noise followed, in order, by the EM31 and EM34. The combination of terrain- conductivity and ground-penetrating radar for the site assessment of the landfill provided a powerful means to identify the areal extent of the landfill, potenti

Water-Resources Investigations Report↗

Synergy between geology and geophysics in graphite mineral resource assessment

Graphite is designated as a critical mineral by the U.S. Government due to its essential role in modern technology and its vulnerability to supply chain disruption. To evaluate domestic graphite resources, the U.S. Geological Survey (USGS) conducted two airborne electromagnetic (AEM) surveys as part of the Earth Mapping Resources Initiative (Earth MRI) over prospective areas in the southern Appalachians of Alabama and the Seward Peninsula of Alaska. These surveys aimed to refine areas of interest by revealing subsurface electrical resistivity patterns indicative of graphite-bearing rocks. The results of the AEM surveys were integrated with existing geological knowledge and supplemented by field observations to assess the likelihood of undiscovered resources in these regions. This multidisciplinary approach combined geophysical techniques with traditional geological methods, enhancing the understanding of graphite potential in areas that may have been previously overlooked. The findings from this initiative are expected to contribute significantly to the ongoing efforts to secure a reliable domestic supply of graphite, thereby reducing import reliance and supporting national interests in mineral resource management.

Conference Paper↗

The Piezometric surface of artesian water in the Florida peninsula

The ground‐ water of the Florida Peninsula constitutes one of its most valuable natural resources and is of importance as a source of water ‐supplies throughout the area. The problems relating to the development of ground‐ water supplies are both quantitative and qualitative. They include such problems as the decline in yield of wells in areas of large withdrawals of water and salt‐ water contamination of ground‐ water supplies. In order to facilitate a better understanding and interpretation of hydrologic conditions relating to these local ground‐ water problems, a general survey of the artesian water in the Florida Peninsula was made by the United States Geological Survey in 1934.

Florida↗

Report of committee on glaciers, 1940–41

The personnel of the Committee is now as follows: Harry Fielding Reid, Professor Emeritus of Geology, Johns Hopkins University, 608 Cathedral Street, Baltimore, Maryland; William H. Hobbs, Professor Emeritus of Geology, University of Michigan, Ann Arbor, Michigan; Lawrence Martin, Chief of the Division of Maps, Library of Congress, Washington, D.C.; J. E. Church, Professor of Meteorology, Agricultural Experiment Station, University of Nevada, Reno, Nevada; Wm. Osgood Field, Jr., Explorer, 18 West Twelfth Street, New York, New York; Oliver Kehrlein, Chairman, Committee on Glacier Studies of Sierra Club, 1050 Mills Tower, 220 Bush Street, San Francisco, California; Kenneth N. Phillips, Associate Hydraulic Engineer, Water Resources Branch, United States Geological Survey, Chairman, Research Committee of the Mazamas, 606 Post‐Office Building, Portland, Oregon; William S. Cooper, Professor of Botany, University of Minnesota, Minneapolis, Minnesota; Gerald Fitzgerald, Senior Topographic Engineer, Alaska Branch, United States Geological Survey, Washington, D.C.; Laurence M. Gould, Professor of Geology, Carleton College, Northfield, Minnesota; Dr. Max Demorest, Department of Geology, Yale University, New Haven, Connecticut; François E. Matthes (Chairman), Senior Geologist, Section of Glacial Geology, United States Geological Survey, Washington, D.C.

Eos, Transactions, American Geophysical Union↗

Log ASCII Standard (LAS) Files for Geophysical (Gamma Ray) Wireline Well Logs and Their Application to Geologic Cross Section C-C' Through the Central Appalachian Basin

U.S. Geological Survey (USGS) regional geologic cross section C-C' (Ryder and others, 2008) displays key stratigraphic intervals in the central Appalachian basin. For this cross section, strata were correlated by using descriptions of well cuttings and gamma ray well log traces. This report summarizes the procedures used to convert gamma ray curves on paper well logs to the digital Log ASCII (American Standard Code for Information Interchange) Standard (LAS) format using the third-party software application Neuralog. The procedures could be used with other geophysical wireline logs also. The creation of digital LAS files from paper well logs by using Neuralog is very helpful, especially when dealing with older logs with limited or nonexistent digital data. The LAS files from the gamma ray logs of 11 wells used to construct cross section C-C' are included in this report. They may be downloaded from the index page as a single ZIP file.

Open-File Report↗