USGS Science⌕ Search

SEARCH · USGS Science

Results for “Soil Dynamics and Earthquake Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 64Linked to original sources
USGS2024

Hydrologic investigations and a preliminary conceptual model of the groundwater system at North Penn Area 1 Superfund Site, Souderton, Montgomery County, Pennsylvania

The U.S. Geological Survey (USGS) conducted hydrogeologic investigations, reviewed existing data, and developed a preliminary conceptual model of the groundwater system as part of technical support of the U.S. Environmental Protection Agency (EPA) at the North Penn Area 1 Superfund Site (hereafter, the NP1 Site) located within the Borough of Souderton in Montgomery County, Pennsylvania. Field work and monitoring took place during 2012–18. The area is underlain by sedimentary formations that form a fractured-rock aquifer used for drinking water and industrial supply. The EPA placed the Site on the National Priorities List in 1989, identifying tetrachloroethylene (PCE) and trichloroethylene (TCE) as contaminants of concern. During 2012–18, the USGS conducted field activities that included drilling an 82-foot (ft)-deep monitoring well (MG 2220) in 2016, reconstructing a 208-ft-deep former industrial production well (MG 668 [Granite Knitting Mill]), and collecting borehole geophysical and video logs and water levels from those and five additional wells, which ranged in depth from about 50 to 200 ft below land surface. Continuous water levels were collected during 2014–17, and a synoptic set of water levels were measured in April 2018 in the seven wells. The borehole geophysical logs (caliper, acoustic televiewer, natural gamma, single-point resistance, vertical flow, and fluid temperature and resistivity) and borehole video logs in the seven wells were evaluated to assess potential for lithologic correlation and to identify and describe water-bearing features, which included both low- and high-angle fractures and other openings oriented along dipping bedding planes, joints, or possible faults. Borehole geophysical logs collected by USGS in 1992 in a 300-ft-deep former production well near the Site were also evaluated. Few to no distinctive features were identified on geophysical logs (natural gamma and single-point resistance) that could be used for correlation, thus limiting this approach to determining local geologic structure. Extensive fracturing in the upper 62 ft of monitoring well MG 2220 indicates that the well was likely drilled through a zone of faulting, and other evidence of faulting is present in the area near the Site. Assessment of continuous water levels showed hydraulic connections among some wells as indicated by rising or falling water levels in response to changes in pumping rates at nearby wells. A map of water levels measured in April 2018 indicates potential for groundwater flow generally toward the stream to the south and southwest of the Site, but the limited water-level data are insufficient to describe vertical groundwater gradients or lateral gradients in any detail. Review of 1999–2022 volatile organic compound (VOC) monitoring data collected by the Pennsylvania Department of Environmental Protection for five monitoring wells indicates that the highest groundwater concentrations of PCE and TCE were found in samples from extraction well MG 2201 (S-1) downgradient from, and nearest to, the previously identified Site contaminant source area, and these concentrations fluctuated through time. PCE concentrations were higher than TCE concentrations in samples from all five monitoring wells and were much higher than TCE concentrations in samples from extraction well MG 2201 (S-1). Temporally variable recharge is a possible factor affecting observed fluctuations in PCE concentrations in groundwater samples from well extraction MG 2201 (S-1), as indicated by a general inverse relation between PCE concentrations and water levels in a nearby long-term observation well. The PCE concentration of 1,830 micrograms per liter (μg/L) in a May 2018 water sample from monitoring well MG 2220 was more than four times the PCE concentration of 444 μg/L in a December 2017 sample from the nearby extraction well MG 2201 (S-1), which is open to fewer fractures. Low concentrations of VOCs were measured in surface water at two stream sites downgradient from wells with the highest groundwater VOC concentrations at the Site, indicating that discharge of contaminated groundwater to the stream is likely. Development of a conceptual model of the groundwater system was constrained by limited data. In areas with no pumping, groundwater-flow directions generally are thought to be controlled by topography and geologic structure (bedding orientation) and likely to the south and southwest of the Site, with local flow directions affected by orientations of fractures, joints, and local faults. Additional investigations that could help improve the conceptual model of the groundwater system and help delineate the extent of groundwater contamination and its transport are discussed.

Pennsylvania↗
USGS2025

Wetter winters, drier summers: Quantifying the change in hydrological response around the Puget Sound area using the wflow_sbm hydrological model and CMIP6 projections

Climate change is expected to impact hydrological regimes worldwide, including the Pacific Northwest of the United States. This study investigates how climate change will affect river discharge in the Puget Sound region of the State of Washington, with a focus on King and Pierce Counties. We simulated river discharge under historical and future conditions using the physically based, spatially distributed wflow_sbm hydrological model, which was calibrated and validated against U.S. Geological Survey discharge records. Future forcing was based on an ensemble of six high-resolution CMIP6 climate models, which were bias corrected using empirical quantile mapping. The results indicate a decrease in summer discharges (5–10%) and an increase in winter discharges (5–10%) across the study region. The high discharges (90th percentile) are projected to increase in winter, and the low discharges are projected to decrease in summer, due to shifts in precipitation regimes, snowpack hydrology, and evapotranspiration. However, variability between individual CMIP6 models often exceeds the magnitude of ensemble mean changes, underscoring substantial uncertainty in climate projections and the importance of including multiple climate models in climate change analysis. Furthermore, model consensus increased with elevation, which could be the result of the higher elevation areas being driven by less diverse hydrological processes. These findings highlight potential challenges for regional water management, ecosystem health, and flood risk mitigation in the Puget Sound region under future climate conditions.

EarthArXiv↗
USGS1996

Magnitude and frequency of floods in the Suwannee River Water Management District, Florida

Flood-frequency statistics for 2-, 5-, 10-, 25-, 50-. 100-, 200-, and 500-year recurrence intervals, based on three methods of analysis, are presented for 25 continuous-record and seven peak flow partial-record gaging stations in the Suwannee River Water Management District. The first method, for gaged stations, utilizes station records; the second method, for ungaged sites, utilizes regional regression analysis; and the third method uses a weighted combination of the station and regional values. Because the weighted values utilize two more or less independent estimates of the peak flow statistic, they are considered more accurate than the station estimates or the regression estimates alone. Also, the use of another weighting scheme to improve estimates of flood frequency statistics at ungaged sites is demonstrated. The karstic nature of much of the Suwannee River Water Management District significantly attenuates flood peaks in some streams by providing substantial subsurface storage when river stages are high. At such times, springs discharging into rivers may reverse flow temporarily and become sinks.

Florida↗
USGS2023

Advancing subsurface investigations beyond the borehole with passive seismic horizontal-to-vertical spectral ratio and electromagnetic geophysical methods at transportation infrastructure sites in New Hampshire

The U.S. Geological Survey (USGS), in cooperation with the New Hampshire Department of Transportation (NHDOT), surveyed transportation infrastructure sites using rapidly deployable geophysical methods to assess benefits added to a comprehensive site characterization with traditional geotechnical techniques. Horizontal-to-vertical spectral-ratio (HVSR) passive-seismic and electromagnetic-induction (EMI) methods were applied at 4 sites including a roadway-stream crossing, roadway-bridge rail-trail crossing, commuter-parking expansion, and a railroad-adjacent river-cutbank slope-failure site. Additionally, ground-penetrating-radar (GPR) was used at the slope-failure site. Typically, subsurface geotechnical properties are determined from boring data; however, borings are often spaced hundreds of feet apart, potentially missing important spatial variability between boreholes. Geotechnical site characterization including geophysical surveys helped provide a more accurate characterization by using continuous or near continuous profiling. Three-component ambient noise measured with HVSR methods were used to determine resonance frequency and estimate sediment thickness. The method works when there is a strong shear-wave acoustic impedance contrast (> 2:1) between sediment and bedrock. Sediment thickness estimates from HVSR measurements were combined with boring data to make detailed maps of the bedrock surface altitude. The bulk electrical conductivity of the subsurface was indirectly measured with EMI methods and was used to identify lithologic variations, shallow bedrock, and conductive groundwater. Ground penetrating radar, which transmits pulses of electromagnetic energy into the subsurface and records the amplitude and timing of reflected signals, was used to identify bedding and changes in lithology or water content. By combining geophysical and boring data analyses, transportation projects produced more spatially comprehensive representations of geotechnical subsurface conditions than would be determined using conventional borings alone.

New Hampshire↗
USGS2026

Methodology for construction of a three-layer geologic model of the conterminous United States using land surface, top of bedrock, and top of basement

This report describes the methodology used for the construction of a digital three-layer geologic model of the conterminous United States by mapping the altitude of three surfaces: land surface, the top of bedrock, and the top of basement. These surfaces are mapped through the compilation and synthesis of published stratigraphic horizons from numerous topical studies. The mapped surfaces create a three-layer geologic model with three geomaterial-based subdivisions: unconsolidated to weakly consolidated sediment; layered consolidated rock strata that constitute bedrock; and crystalline rocks that are described as “basement,” consisting of either igneous, metamorphic, or highly deformed rocks. The data compilation and synthesis are highly dependent on the definition of the informal terms “bedrock” and “basement,” which may describe different ages or types of rock in different parts of the conterminous United States. This report presents the conceptualization of the three mapped layers, describes the datasets used, and summarizes the decisions made while compiling the three-layer model from the various sources. This digital dataset was created as part of efforts by the U.S. Geological Survey to develop subsurface geologic data in geospatial form as part of a broad directive to develop two-dimensional and three-dimensional geologic information at detailed, national, and continental scales. This digital dataset partly fulfills the goal of the U.S. Geological Survey’s National Cooperative Geologic Mapping Program to construct a national-scale three-dimensional geologic model.

conterminous United States↗
USGS2024

Detrital zircons and the magmatic history of Viti Levu, Fiji

We integrate the existing detrital zircon data from multiple modern river sediment samples on Viti Levu, Fiji, with the most current available geological and topographic mapping of the respective river drainage basins to compare detrital populations with potential bedrock sources. The temporal and spatial variations in zircon geochemistry supplement what is known from igneous rocks and confirm the petrological differences between plutonic and volcanic rocks from the Eocene to early Oligocene (Yavuna age, >30 Ma), middle Oligocene to middle Miocene (Wainimala age, 30–12.5 Ma), late Miocene (Colo age, 12.5–6.5 Ma) and latest Miocene (Namosi age, 6.5–5 Ma). The >30 Ma Yavuna-age zircons are restricted to areas that drain the previously mapped Yavuna Group. The 30–12.5 Ma zircons are found across central Viti Levu from west to east, and the 30–15 Ma zircons have distinctively low U/Yb and high Dy/Yb ratios. They are the best radiometric evidence of widespread early to middle Miocene arc magmatism in Fiji that was relatively U-poor. Peak deconvolution of the Colo age zircons from individual basins suggests the following ages for undated or poorly dated plutons from central Viti Levu. The large Mavuvu pluton is probably composed of multiple intrusions in the 12–10 Ma range, the Waiqa pluton is probably ca 10 Ma, and the Noikoro pluton is probably ca 9 Ma. There are zircons from unknown plutonic or volcanic sources between 8 and 7 Ma in western Viti Levu that have distinct Eu/Eu* ratios. We attribute the highest U/Yb ratios in some Colo age zircons to crustal anatexis. Namosi-age zircons are abundant in the Medrausucu Group and can be found scattered across Viti Levu.

Viti Levu↗
USGS2025

Low-sulfidation epithermal deposits of the central Basin and Range Province, USA

The Basin and Range Province is host to many important low-sulfidation epithermal deposits. Within this broad zone of extension, epithermal deposits are hosted by specific areas of Miocene and younger bimodal volcanism. In northern Nevada, rifting and related volcanic activity occurred in response to thermal bulging during the development of the Yellowstone hotspot. The Colorado River Extensional Corridor in southern Nevada, adjoining eastern California and northwestern Arizona, is a major zone of Miocene crustal extension formed during the transformation of the western margin of North America from a convergent to a transform plate boundary. The style of mineralization in the low-sulfidation epithermal deposits in these areas is strongly controlled by the nature of the volcanic successions. Highgrade, low-tonnage deposits are commonly found in flow-dominated volcanic successions where ore deposition occurred through short-lived periods of fluid flashing. In contrast, low-grade, large-tonnage deposits are more commonly located in clastic-dominated successions where fluid infiltration of the permeable hosts and cooling predominated.

Arizona, California, Nevada, Oregon↗
USGS2025

Ordovician stratigraphy, structure, and karst of the Falling Spring Valley, Alleghany County, Virginia, USA

This one-day trip highlights new findings on a preliminary bedrock geologic map that shows results from ongoing geologic mapping in the Falling Spring Valley of Alleghany County, Virginia, USA, which is the southern end of the larger Warm Springs Valley, an elongated anticlinal valley rimmed by Ordovician and Silurian siliciclastic rocks, and which is famous for its thermal springs. This mapping includes stratigraphic, structural, and karst field and lab research focused on the Ordovician strata exposed in the area, the oldest of which is the dolomitic upper part of the Beekmantown Formation (Lower Ordovician, Darriwilian), and the youngest of which is the Juniata Formation (Upper Ordovician, Katian), a sequence of siliciclastic redbeds. Warm Springs Valley is the location of the only known caves in the eastern United States—three at present—with thermal waters flowing in some of their passages. Stops on the trip will highlight key details from mapping efforts, primarily within the structurally deformed Ordovician carbonate sequence that is exposed in the core and limbs of the anticline, as well as the associated karst features that are developed in those carbonate rocks, including results of recent dye traces and water temperature monitoring that have improved our understanding of the karst hydrogeologic systems developed in these strata.

Virginia↗
USGS2025

Groundwater-level elevations in the Denver Basin bedrock aquifers and Upper Black Squirrel Creek alluvial aquifer, El Paso County, Colorado, 2021–24

El Paso County is the second-most populous county in Colorado and is projected to grow another 15 percent by 2030. Within El Paso County is the Upper Black Squirrel Creek Designated Groundwater Basin (Black Squirrel Basin), an area where surface water is scarce and water users rely primarily on groundwater from five different aquifers (the Upper Black Squirrel Creek alluvial aquifer and four bedrock aquifers within the Denver Basin aquifer system: the lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) to meet their needs. Currently (2024), land within the Upper Black Squirrel Creek Basin is primarily used for rural grazing and agriculture; however, municipal development is ongoing. In 2021, the U.S. Geological Survey, in cooperation with the Upper Black Squirrel Creek Ground Water Management District, began a study to establish a baseline dataset and assess the groundwater resources of the aquifers within the Black Squirrel Basin. A network of 39 wells was established in 2021; discrete groundwater-level measurements were made bimonthly. Nine of the 39 wells were equipped with pressure transducers to record hourly groundwater-level data. Seven wells had statistically significant seasonal trends, and trends at 3 wells were negative. For the discrete data, 16 wells had a significant trend for the study period, and 4 wells had negative trends. For the time-series data, 8 wells had significant trends, and 3 wells had negative trends. Potentiometric surface maps were created for this study using discrete, static groundwater levels measured in April 2023. These maps showed the estimated groundwater flow direction from the north-northwest to the south-southeast in the alluvial aquifer and from the northwest to the east-southeast for the lower Dawson and Denver aquifer wells. This study indicates the potential benefit of monitoring wells in the areas near municipal pumping. Additional monitoring could lead to a better understanding of connectivity between aquifers and be an important tool for assessing long-term sustainability of groundwater use.

Colorado↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS2025

Light absorbing particles deposited to snow cover across the Upper Colorado River Basin, Colorado Rocky Mountains, 2013-16: Interannual variations from multiple natural and anthropogenic sources

Atmospheric particulate matter (PM) as light-absorbing particles (LAPs) deposited to snow cover can result in early onset and rapid snow melting, challenging management of downstream water resources. We identified LAPs in 38 snow samples (water years 2013–2016) from the mountainous Upper Colorado River basin by comparing among laboratory-measured spectral reflectance, chemical, physical, and magnetic properties. Dust sample reflectance, averaged over the wavelength range of 0.35–2.50 μm, varied by a factor of 1.9 (range, 0.2300–0.4444) and was suppressed mainly by three components: (a) carbonaceous matter measured as total organic carbon (1.6–22.5 wt. %) including inferred black carbon, natural organic matter, and carbon-based synthetic, black road-tire-wear particles, (b) dark rock and mineral particles, indicated by amounts of magnetite (0.11–0.37 wt. %) as their proxy, and (c) ferric oxide minerals identified by reflectance spectroscopy and magnetic properties. Fundamental compositional differences were associated with different iron oxide groups defined by dominant hematite, goethite, or magnetite. These differences in iron oxide mineralogy are attributed to temporally varying source-area contributions implying strong interannual changes in regional source behavior, dust-storm frequency, and (or) transport tracks. Observations of dust-storm activity in the western U.S. and particle-size averages for all samples (median, 25 μm) indicated that regional dust from deserts dominated mineral-dust masses. Fugitive contaminants, nevertheless, contributed important amounts of LAPs from many types of anthropogenic sources.

Colorado↗
USGS2025

Using the D-Claw software package to model lahars in the Middle Fork Nooksack River drainage and beyond, Mount Baker, Washington

Lahars, or volcanic mudflows, are the most hazardous eruption-related phenomena that will affect communities living along rivers that originate on Mount Baker. In the past 15,000 years, the largest lahars from Mount Baker have affected the Middle Fork Nooksack River drainage and beyond. Here we use the physics-based D-Claw software package to model nine lahar scenarios that are initiated as water-saturated landslides between Sherman Crater and the Roman Wall on the Mount Baker edifice and flow down the Middle Fork Nooksack River. The scenarios range in volume from 1 to 260 million cubic meters and have an initial hydraulic permeability from 10 −12 to 10 −10 meters squared. Model output includes data such as flow depth, velocity, runout distance, area inundated, arrival time, and sediment concentration as well as information that allows scientists to calculate other important hydrologic characteristics such as lahar discharge. These data are important to officials who have the responsibility to plan for, or take mitigation measures against, future Mount Baker lahars. To check the validity of the D-Claw results, we compare the scenarios to known geologic information. We also compare D-Claw results with empirical models that have been used in the past to determine potential inundation areas, runout distances, and arrival times. These comparisons highlight similarities and differences between empirical and physics-based models. We also present D-Claw scenario-based animations to help scientists, officials, and lay people alike to visualize how future lahars could affect communities.

Washington↗
USGS2026

Validating antler- and movement-based estimates of caribou reproduction using video camera collars

Wildlife agencies invest substantial resources in monitoring ungulate reproductive rates given ongoing concerns about population trends and their implications for management. For barren-ground caribou ( Rangifer tarandus ) in the North American Arctic, data on parturition and neonate survival have traditionally been collected using visual observations of antler retention and calf presence from small, fixed-wing aircraft. However, these surveys are weather-dependent, expensive, and dangerous, motivating the development of movement-based approaches that infer reproductive events from global positioning system (GPS) location data. We had the unique opportunity to use video camera collars to validate both antler- and movement-based methods for estimating reproduction in barren-ground caribou, using data from the Porcupine (2018–2023) and Western Arctic (2021, 2023) herds in Alaska, USA, and Yukon, Canada. For the movement-based approaches, we assessed individual-based and population-based methods, which both inferred parturition following a sharp decline in movement and inferred calf loss following a sharp increase in movement. We investigated these approaches using rarified 1-, 2-, 4-, and 8-hour fix intervals. Based on video collar observations, we found that antler retention at the onset of the calving period was highly accurate for predicting parturition (96% accuracy) but became unreliable as calving progressed, as approximately 80% of parturient females shed their antlers during the calving period. In contrast, both movement methods performed marginally for estimating caribou parturition (~70% accuracy), with estimates from the individual-based method exhibiting greater bias than those from the population-based method. The individual-based method also poorly predicted neonate survival (≤49% accuracy for detecting parturition and calf fate for the Porcupine Herd). Video data revealed that inaccuracies with the movement methods often occurred when caribou bedded during storms, rested after traversing mountainous terrain, lost a calf shortly after birth, or increased movement to evade insects. These results have important implications for management agencies using antler- and movement-based methods to estimate caribou reproduction, particularly when informing assessments of population decline or recovery. Our results demonstrate the utility of video collar data for validating reproductive monitoring approaches and provide insights into how these approaches can be improved.

Alaska, Yukon↗
USGS2023

Stream sediment geochemistry in mineral exploration: A review of fine-fraction, clay-fraction, bulk leach gold, heavy mineral concentrate and indicator mineral chemistry

Stream sediment surveys support early-stage reconnaissance mineral exploration and regional assessment programmes, enhanced by recent improvements in analytical method detection limits, continuously improving mineral chemistry, and new approaches to the interpretation of geochemical data. Sediment surveys may be used to predict catchment basin lithology, mineralization type based on pathfinder geochemistry, and geological features based on indicator mineral chemistry. Sediment surveys that target a finer-fraction sediment sample led to the discovery of the La Colosa gold deposit, Colombia. The Batu Hijau porphyry Cu–Au deposit in Indonesia was discovered based on an anomalous clay-sized fraction sample 12 km downstream. In an arid region with poorly developed drainages and minor topographic relief, the Ag-base-metal Navidad District in Argentina was discovered with clay-fraction sediment geochemistry. Heavy mineral concentrate (HMC) sediment surveys that include mineral chemistry determinations have led to global diamond discoveries. HMC surveys contributed to discovery of the Ring of Fire Ni–Cu–PGE and chromite district, Ontario, Canada. Discoveries and geochemical mapping can assist advancement of the application of stream sediment geochemistry in those global areas for which lithologies and deposits are exposed. Stream sediment surveys continue to be one of the most cost-effective geochemical methods for covering large areas for mineral exploration.

Geochemistry: Exploration, Environment, Analysis↗
USGS2026

A cross-site comparison of ecosystem- and plot-scale methane fluxes across multiple sites

Wetland and upland ecosystems play significant but opposing roles in the global methane (CH 4 ) budget, acting as natural sources and sinks, respectively. Two of the most common approaches for measuring CH 4 fluxes (FCH 4 ) are chambers, which measure fluxes at fine spatial scales (ca. 1 m 2 ), and eddy covariance (EC) towers, which integrate fluxes across larger footprints (ca. 100–10 000 m 2 ). Although chamber and EC observations have been combined in various syntheses and databases to estimate CH 4 budgets, a unified cross-site evaluation of FCH 4 estimates at plot and ecosystem scales is lacking. As a first step toward a systematic spatiotemporal scaling of EC tower and chamber footprints, we quantified differences in site-level aggregate FCH 4 between EC and chamber measurements ( Δ FCH 4 ) across ten wetland and upland sites at half-hourly, hourly, daily, weekly, monthly, and annual timescales. We found that ecosystem-scale median FCH 4 was consistently higher than plot-scale FCH 4 at all temporal scales, with the smallest difference at the daily timescale (multi-site median Δ FCH 4 : 1.36 nmol m −2 s −1 ; median ecosystem-scale FCH 4 = 1.56 nmol m −2 s −1 , median plot-scale FCH 4 = 0.06 nmol m −2 s −1 ) and the largest at annual scales (2.58 nmol m −2 s −1 ; median ecosystem-scale FCH 4 = 25.91 nmol m −2 s −1 , median plot-scale FCH 4 = 6.55 nmol m −2 s −1 ). In general, the agreement between ecosystem- and plot-scale FCH 4 decreased with finer temporal resolution (from Spearman ρ = 0.95 at the annual scale to ρ = 0.65 at the half-hourly scale), while Δ FCH 4 variation was greatest at daily-to-annual scales. Key environmental predictors of Δ FCH 4 across the ten sites included plot-scale spatial heterogeneity, dominant vegetation type, vapor pressure deficit, atmospheric pressure, and friction velocity at the daily and monthly scales. Wind direction was a significant predictor only at the monthly scale, suggesting EC footprint effects at these sites. These findings suggest that accounting for variability in EC footprint extent, chamber measurement placement, and measurement artifacts is key to reconciling multi-scale FCH 4 observations across diverse ecosystems and refining CH 4 budgets.

Biogeosciences↗
USGS2026

Geophysical architecture and geochronology of the Neoarchean Mentor anorthosite intrusive complex, northwestern Minnesota: Largest anorthosite complex of the Superior Province?

The Neoarchean Mentor anorthosite intrusive complex (MAIC) lies within the Wawa subprovince in northwestern Minnesota, in a region where the Wawa, Quetico, and Wabigoon subprovinces are juxtaposed in close proximity. Archean rocks are entirely concealed, and interpretations are developed from aeromagnetic, gravity, and borehole samples. The MAIC includes both anorthosite (dense, weakly magnetized) and oxide-rich gabbro (strongly magnetized) lithologies. Anorthosite is coarse-grained to megacrystic, intensely altered, and locally brecciated. Pervasive epidote alteration enhanced the density of the anorthosite via introduction of higher-density mineral assemblages, explaining why the MAIC produces a significant gravity high. Oxide-rich gabbro forms a border phase of the MAIC and has potential for vanadium, chromium, and titanium mineralization, and produces a strong aeromagnetic high. The MAIC is interpreted to extend over an area of 640 km 2 , making it the largest known anorthosite complex of the Superior Province, as measured by preserved areal extent. Modeling indicates the MAIC extends more than 6 km into the subsurface. A new Pb–Pb zircon age of 2737.2 ± 4.5 Ma is interpretated as the crystallization age of anorthosite within the MAIC, showing that the MAIC formed well before the ca. 2690 Ma Shebandowanian orogeny, and raising new questions about correlations with other parts of the Wawa subprovince. A low-density batholith, here informally called the Fertile batholith, is interpreted to intrude the southern part of the MAIC. A new Pb–Pb zircon age of 2701.1 ± 6 Ma is interpreted as the magmatic age of the Fertile batholith.

Minnesota↗
USGS2025

Reduction of red bed sedimentary rocks in connection with energy metal ore formation: A case study from the Sinbad seep, Mesa County, Colorado

The Paradox Basin’s Sinbad seep is a modern analog for ancient bleaching of red bed sediments by introduced alkaline, reducing brines. This bleaching, involving reductive alteration of former red beds, is essential ground preparation that enables the altered rocks to trap Cu, U, and V from later oxidized fluids, forming ore deposits. Study of Sinbad thus offers insights into these metallic mineralization processes in the Paradox and other sedimentary basins. The Sinbad seep occurs where shallow groundwater interacts with organic-rich petroleum source rocks, flows up a fault, and discharges into Salt Creek. Ratios of Na/Cl, Na/Br, and Cl/Br, plus high sulfate concentrations, indicate that the salinity of the seep water originated from dissolution of halite and gypsum during topographically driven flow of meteoric water across a diapir of the Pennsylvanian Paradox Formation, rather than from deep basinal brines. In contact with the organic-rich shales of the Paradox, these SO 4 -rich waters become reduced through bacterial reduction, producing H 2 S. The waters react with red beds of the Permian Cutler Formation, causing pervasive bleaching. The bleaching at Sinbad is characterized by iron-conservative reduction of ferric iron in diagenetic hematite and detrital ilmenite and magnetite to Fe sulfides. The ferrous iron is retained in these sulfides likely as sorbed Fe. Associated alteration includes precipitation of quartz and feldspar overgrowths, partial dissolution of detrital quartz and feldspar caused by pressure solution, formation of clay and authigenic rutile, and precipitation of carbonate and gypsum. The Fe sulfides rapidly degenerate to a mixture of jarosite and iron oxides on weathering at the surface. Among the major-oxide elements and most trace elements, there is no statistical difference between unbleached and bleached samples. The exceptions are uranium and sulfur, which are somewhat greater in bleached samples. Fission track radiography illuminates that uranium is preferentially concentrated in iron oxide cements, iron sorbed into detrital clasts, and finely disseminated iron oxide in illite cement in bleached samples. A leaching experiment suggests that uranium may be more easily available for mobilization from rocks that have undergone bleaching alteration, making them potential U sources. In addition, bleached rocks form effective traps for U, V, and some Cu mineralization.

Colorado↗
USGS1997

Analysis of minimum 7-day discharges and estimation of minimum 7-day, 2-year discharges for streamflow-gaging stations in the Brazos River basin, Texas

The minimum 7-day, 2-year discharge (7Q2) was estimated for each of 97 streamflow-gaging stations in the Brazos River Basin, Texas, with at least 10 years of unregulated or 10 years of regulated discharge data using the Pearson Type III distribution fitted by L-moment statistics of the annual minimum 7-day discharges. Forty-six stations have at least 10 years of unregulated discharge data only, 26 stations have at least 10 years of regulated discharge data only, and 25 stations have at least 10 years of unregulated and 10 years of regulated discharge data. Statistical tests were applied to the annual minimum 7-day discharges to determine if the unregulated and regulated data have trends; and to determine if the data before regulation are significantly different from the data after regulation. Results of the Mann-Kendall test indicate a significant trend at the 95-percent confidence level for 8 of the 46 unregulated-only stations, for 6 of the 26 regulated-only stations, and for 5 stations before regulation and for 10 stations after regulation of the 25 stations with both unregulated and regulated data. Results of the Wilcoxon rank-sum test indicate a significant difference between the unregulated and regulated annual minimum 7-day discharges at the 95-percent confidence level for 16 of the 25 stations with both types of data. The 7Q2 is zero for 31 of the 46 unregulated-only stations and for 9 of the 26 regulated-only stations. The 7Q2 also is zero for 9 stations before regulation and for 3 stations after regulation of the 25 stations with both unregulated and regulated data. The 7Q2 ranges from 33 to 631 cubic feet per second for the eight regulated-only stations on the mainstem Brazos River. For the seven stations on the mainstem Brazos River with at least 10 years of unregulated and 10 years of regulated discharge data, the 7Q2 ranges from 0 to 568 cubic feet per second before regulation and from 0.30 to 670 cubic feet per second after regulation. The 7Q2 increased during regulation for 19 of the 25 stations with both unregulated and regulated data. The effect of regulation for most stations generally was an increase in the magnitude of the 7Q2.

Texas↗