USGS Science⌕ Search

SEARCH · USGS Science

Results for “Bulletin of the Seismological Society of America”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,690 records · Page 64Linked to original sources
USGS1976

Ground magnetic and VLF studies at Midnite uranium mine, Stevens County, Washington

Ground magnetic and E-mode VLF measurements were made at more than 200 stations at the Midnite uranium Mine, Stevens County, Washington. The equipment was found to be light and foolproof, and each set of data was collected in one day, exclusive of surveying and marking the station points. The maps of contoured magnetic and VLF data resembled geologic maps of the area, showing many common features, as well as a few unique features on each map. Each showed some evidence of a small normal fault cutting the region; taken together, the evidence for this fault was judged to be much stronger, so that further structural details were inferred. Because of soil cover and inadequate outcrops, the presence of this fault had hitherto been unsuspected. A target area for further uranium mineralization north of the fault was indicated by this quick, inexpensive geophysical survey. The drilling program which Midnite Mine management had underway at that time had already outlined a mineralized zone in the indicated area.

Washington↗
USGS2024

Rainfall intensification amplifies exposure of American Southwest to conditions that trigger postfire debris flows

Short-duration, high-intensity rainfall can initiate deadly and destructive debris flows after wildfire. Methods to estimate the conditions that can trigger debris flows exist and guidance to determine how often those thresholds will be exceeded under the present climate are available. However, the limited spatiotemporal resolution of climate models has hampered efforts to characterize how rainfall intensification driven by global warming may affect debris-flow hazards. We use novel, dynamically downscaled (3.75-km), convection-permitting simulations of short-duration (15-min) rainfall to evaluate threshold exceedance for late 21st-century climate scenarios in the American Southwest. We observe significant increases in the frequency and magnitude of exceedances for regions dominated by cool- and warm-season rainfall. We also observe an increased frequency of exceedance in regions where postfire debris flows have not been documented, and communities are unaccustomed to the hazard. Our findings can inform planning efforts to increase resiliency to debris flows under a changing climate.

Arizona, California, Nevada, New Mexico, Utah↗
USGS2025

Divide and conquer: Separating the two probabilities in seismic phase picking

There are two fundamental probabilities in the seismic phase picking process – the probability of the existence of a seismic phase (detection probability) and the probability of correctly identifying the phase arrival time (timing probability). The nearly ubiquitous approach in developing deep learning phase picking models is to use a kernel, such as a truncated Gaussian, to mask the labeled phase arrival time, and train a segmentation model. Once a model is trained, the times of the peaks in the output are taken as phase arrival times (picks) and the height of the peaks are taken as “probability” of the picks. Here, we show that this “probability” represents neither the detection nor the timing probabilty because this approach forces the output to follow the shape of the kernel. We introduce an approach using two models to estimate these two distinct probabilities. We use a binary classifier with a calibrated confidence to address the detection probability and a multi-class classifier to obtain a probability mass function to address the timing probability. This new approach makes the deep learning-based phase picking process more interpretable and gives us options to logically control seismic monitoring workflows.

Geophysical Journal International↗
USGS2024

Inset groundwater-flow models for the Cache and Grand Prairie Critical Groundwater Areas, northeastern Arkansas

The water resources in the Mississippi alluvial plain, located in parts of Missouri, Kentucky, Tennessee, Mississippi, Louisiana, and Arkansas, supports a multibillion-dollar agricultural industry that relies heavily on pumping of groundwater for irrigation of crops and aquaculture. The primary source of groundwater for agricultural-related pumping is the Mississippi River Valley alluvial aquifer, which has declined in storage for decades; secondary groundwater sources include the middle Claiborne aquifer and Wilcox aquifer system. Two areas in northeastern Arkansas that lie within the Mississippi alluvial plain, part of the Cache and Grand Prairie regions, have been designated as Critical Groundwater Areas owing to decades of groundwater declines that resulted from past and current water use. The multidisciplinary Mississippi Alluvial Plain project, led by the U.S. Geological Survey, and funded by their Water Availability and Use Science Program, included objectives to develop numerical groundwater models in focus regions, including the part of the Cache and Grand Prairie regions of northeastern Arkansas. Two inset models were developed using the child model capabilities of MODFLOW 6, the U.S. Geological Survey’s Modular Hydrologic Model simulation software. Both models, called the Cache model and Grand Prairie model, simulated the groundwater system and surface-water/groundwater interactions for the Mississippi River Valley alluvial aquifer and underlying Tertiary-age aquifers and confining units to the Midway confining unit. Each model was spatially discretized into 500-meter x 500-meter orthogonal cells on a grid with 5-meter constant-thickness vertical layers that represented the Mississippi River Valley alluvial aquifer and increasing thickness layers for the aquifers and confining units below the alluvial aquifer. The Cache and Grand Prairie models were calibrated with the PEST++ iterative ensemble smoother Version 5 and employed high dimensional parameterization schemes of 13,740 and 30,436 parameters, respectively. The Cache mean absolute residual for groundwater-level observations within each model domain for the priority well was 1.58 meters. Grand Prairie mean absolute residuals for the alluvial aquifer and middle Claiborne aquifer groundwater-level observations were 2.71 and 10.78 meters, respectively. The groundwater budgets for the Cache and Grand Prairie models were characterized by substantial outflows to irrigation wells, which constituted about 52 and 54 percent of all outflows, with the primary source of water to those wells being releases from unconfined aquifer storage.

Arkansas↗
USGS2024

Earthquake relocations delineate discrete a fault network and deformation corridor throughout Southeast Alaska and Southwest Yukon

Deformation in southeastern Alaska and southwest Yukon is governed by the subduction and translation of the Pacific-Yakutat plates relative to the North American plate in the St. Elias region. Despite notable historical seismicity and major regional faults, studies of the region between the Fairweather and Denali faults are complicated by glacial coverage and the remote setting. In the last decade, significant improvements have been made to the density of regional broadband seismometer networks. We relocate more than 5,000 earthquakes between 2010 and 2021 in the region of southeastern Alaska and southwestern Yukon utilizing these improved seismic networks. With reductions in catalog uncertainty, particularly in depth, we quantify the thickness of the seismogenic layer in the crust throughout the region and locate seismicity on a shallow network of upper-crustal faults. Relocated earthquakes, combined with an updated focal-mechanism catalog, permit estimating and classifying motion of active faults. This includes mapping the Totschunda-Fairweather “Connector” fault, which plays an important role in explaining regional deformation, and identifying new faults like the Kathleen Lake fault. We draw similarities between our seismic observations and simplified conceptual models of regional tectonics, which describe a dominant transpressional regime and localized slip partitioning. Our results support a hypothesis where current deformation is taking place on a well-defined and evolved network of shallow faults in the corridor between the Totschunda-Fairweather “Connector” and Denali faults.

Alaska, Yukon↗
USGS2025

Estimated average annualized tsunami losses for the United States

Tsunami hazards are substantial threats to coastal communities across the United States (U.S.) and its territories. U.S. states and territories collaborate through the National Tsunami Hazard Mitigation Program (NTHMP) to develop their own tsunami-hazard information for outreach and evacuation planning. An effort to curate this tsunami-hazard information to support comprehensive risk analysis at the national level has not yet been completed. In support of this effort, the Federal Emergency Management Agency (FEMA) collaborated with the NTHMP, the National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS) starting in 2023. This collaboration included the collection and analysis of existing tsunami hazard data and methods in the U.S. Tsunami subject matter experts identified and selected scientifically defensible methods for estimating the risks to buildings and populations in coastal communities. These efforts may support decision making regarding resilience policies, priorities, strategies and funding levels. Tsunamis can be triggered by earthquakes, subaerial or submarine landslides, volcanic eruptions, glacial calving, near-earth objects, weather or other events. These events can cause severe destruction, injuries, and loss of life due to powerful currents and flooding. Tsunamis pose a substantial threat to the western United States and all U.S. territories, as described below. ■ Hawaii is threatened by distant tsunamis due to its central location in the Pacific Ocean basin and has a history of local events. ■ Alaska, particularly the Aleutian Islands, faces local tsunami threats due to proximity to the Alaska-Aleutian Subduction Zone, as well as distant tsunamis from around the Pacific Ocean basin. ■ The western coast of the U.S. is threatened by distant tsunamis from around the Pacific Ocean basin and local source tsunamis from earthquakes generated within the Cascadia Subduction Zone in the Pacific Northwest. ■ American Samoa faces local tsunami threats from earthquakes generated in the nearby Tonga Trench, as well as distant tsunami threats. ■ Guam and the Commonwealth of the Northern Mariana Islands are threatened by local tsunamis from the nearby Mariana Subduction Zone, as well as distant sources from around the Pacific Ocean Basin. ■ Puerto Rico and the United States Virgin Islands are threatened by multiple local and distant tsunami sources, such as the Puerto Rico Trench (PRT), given their location in the complex seismic region of the Caribbean Sea. Several historical events stand out because of their catastrophic impacts. ■ In the Pacific Northwest, the 1700 Cascadia earthquake caused a tsunami that affected coastal Native American communities, though the extent of the damage is not fully documented (Ludwin, et al., 2005). ■ In Puerto Rico, the 1918 earthquake triggered a tsunami that caused $77 million in damage in 2022 dollars and 116 fatalities, primarily along the western coast (Coffman et al., 1982). ■ The 1946 Aleutian Islands earthquake triggered a massive tsunami that devastated Hilo, Hawaii, killing 158 people and resulting in approximately $375 million in damage (adjusted to 2022 dollars) (Fisher et al., 2023). ■ The 1964 Alaska earthquake (M 9.2) generated tsunamis that caused severe destruction in some communities across Alaska, Oregon, and California. This disaster led to a total of 124 fatalities and approximately $2.9 billion in property damage (adjusted to 2022 dollars) (Brocher et al., 2014) (Alaska Science Center, 2024). ■ In American Samoa, a tsunami generated by the 2009 Samoa earthquake (Mw 8.1) caused widespread devastation, resulting in 34 confirmed fatalities (Apatu et al., 2013) and economic losses exceeding $160 million (adjusted to 2022 dollars) (DHS, 2011). More recent events, including the 2010 Chile earthquake, the 2011 Japan earthquake, and the 2022 Tonga volcanic eruption, resulted in millions of dollars in damage to numerous ports and harbors in the U.S. South Pacific territories, Hawaii, and along the west coast of the U.S. (Lynett, et al., 2022) (Wilson, et al., 2013). Since these events, the expansion of the built environment in lowlying areas along the coast has increased the exposure of buildings and people, thereby further escalating community risk from tsunamis. This report provides a comprehensive national assessment of earthquake-generated tsunami risk. It does not include impacts from tsunamis generated by landslides, volcanic eruptions, glacial calving, near-earth objects, weather, or other events. This study is based on the best available hazard data from the U.S. Pacific Coast (California, Oregon and Washington), Alaska, Hawaii, U.S. Pacific Territories (American Samoa, Guam and Commonwealth of the Northern Mariana Islands) and Caribbean Territories (Puerto Rico and United States Virgin Islands). Tsunami risks associated with states along the East Coast, Gulf Coast, and Great Lakes are not included in this study because Hazus 6.1 software (FEMA 2024a) does not currently include the ability to analyze tsunami risk in those states. Once modeling capabilities and tsunami hazard data become available for additional states, FEMA may incorporate these data into future editions of this study.

Alaska, California, Hawaii Oregon, Washington↗
USGS2026

Software to support remote sensing of river discharge based on critical flow theory

Water resource management requires accurate observations of streamflow but standard field methods for measuring river discharge ( Q ) are costly and can be hazardous for equipment and personnel. Remote sensing has become a viable alternative, but many image-based techniques require field data for calibration and depth and velocity can seldom be mapped with a single sensor. A new approach based on critical flow theory, in contrast, allows both of these attributes to be inferred from readily available image data. This technique only pertains to sites with standing waves, called undular hydraulic jumps (UHJs), but a recent investigation demonstrated its potential to provide accurate discharge estimates. This paper introduces software designed to facilitate Inferring Q from UHJs Identified in River Images (InQUIRI). The package includes modules for retrieving data from image servers, making the measurements of wavelength and width required to calculate discharge, inferring a representative wavelength from a profile digitized along a wave train, combining multiple estimates to obtain an ensemble median discharge, and assessing accuracy via comparison to gage records from the U.S. Geological Survey. By making these steps easier to implement, InQUIRI enables users to apply the workflow to a variety of UHJ-containing images. Accumulating more case studies, some successful and others less so, would help constrain the range of applicability of the critical flow approach and foster development of refined guidelines for selecting and measuring waves. The software described herein could play an important role in promoting informed use of this new technique for non-contact streamflow measurement.

Arizona, Colorado, New Mexico, Utah↗
USGS2025

Laboratory assessment for recovery of porcine circovirus 2 and porcine reproductive and respiratory syndrome virus using two types of commercially available hollow-fiber ultrafilters

Groundwater near swine farms is an uninvestigated reservoir for porcine reproductive and respiratory syndrome virus (PRRSV) and porcine circoviruses (PCVs). Enteric microorganisms are often collected from groundwater via dead-end ultrafiltration, but recovery of PRRSV and PCV with this method has not been assessed. We recovered PRRSV2 and PCV2 by dead-end ultrafiltration followed by polyethylene glycol (PEG) precipitation, nucleic acid extraction, and reverse-transcription quantitative real-time PCR. We also compared 2 commercial hemodialysis ultrafilters (Asahi Kasei Rexeed-25A, Nipro Elisio-25H) and compared PRRSV2 recovery in these filters to other waterborne microorganisms. On average, 8 ± 1% of PRRSV2 was recovered by dead-end ultrafiltration and PEG precipitation, compared to 25 ± 6% for adenovirus 41. Full-process recovery of bacteria in the same filters was 5–15%; Cryptosporidium parvum recovery was 42 ± 12%. PCV2 was detected in 4 of 12 replicate filters, but low stock concentrations precluded quantitative recovery estimates. Elisio-25H ultrafilters performed similarly to Rexeed-25A filters for all organisms tested and is an effective replacement for the Rexeed-25A, which is no longer available in the United States. Our recovery of PRRSV2 and PCV2 by dead-end ultrafiltration in the laboratory suggests that PRRSV2 detection limits are as low as 3–50 genomic copies/L in sample volumes of 100–1,500 L. Based on quantitative microbial risk assessment, these concentrations are relevant to PRRSV2 infection rates in the U.S. swine herd.

Journal of Veterinary Diagnostic Investigation↗
USGS2025

Ubiquity and causes of soil water preferential flow across 17 ecoregions

Preferential flow (PF) in soil causes the rapid transport of water, nutrients, and contaminants into the subsurface, influencing groundwater recharge and streamflow. Data scarcity has hindered the quantification of PF occurrence and the identification of its drivers across diverse ecoregions. We address this gap by analyzing high-frequency, multi-depth soil moisture data across 17 ecoregions in the USA, using ∼1,500 sensors at 40 sites. We discovered that PF is widespread, with sites experiencing PF in up to 60% of rainfall events ≥2 mm. Multiple approaches consistently show that PF is more likely to occur with increased peak rainfall intensity, finer textured material, low soil moisture variability, humid climate, and higher net primary productivity. This suggests that PF patterns could shift with projected climate changes, increasing uncertainty in predictions of groundwater recharge, water quality, and streamflow generation.

conterminous United States and Puerto Rico↗
USGS2024

The spatially adaptable filter for error reduction (SAFER) process: Remote sensing-based LANDFIRE disturbance mapping updates

LANDFIRE (LF) has been producing periodic spatially explicit vegetation change maps (i.e., LF disturbance products) across the entire United States since 1999 at a 30 m spatial resolution. These disturbance products include data products produced by various fire programs, field-mapped vegetation and fuel treatment activity (i.e., events) submissions from various agencies, and disturbances detected by the U.S. Geological Survey Earth Resources Observation and Science (EROS)-based Remote Sensing of Landscape Change (RSLC) process. The RSLC process applies a bi-temporal change detection algorithm to Landsat satellite-based seasonal composites to generate the interim disturbances that are subsequently reviewed by analysts to reduce omission and commission errors before ingestion them into LF’s disturbance products. The latency of the disturbance product is contingent on timely data availability and analyst review. This work describes the development and integration of the Spatially Adaptable Filter for Error Reduction (SAFER) process and other error and latency reduction improvements to the RSLC process. SAFER is a random forest-based supervised classifier and uses predictor variables that are derived from multiple years of pre- and post-disturbance Landsat band observations. Predictor variables include reflectance, indices, and spatial contextual information. Spatial contextual information that is unique to each contiguous disturbance region is parameterized as Z scores using differential observations of the disturbed regions with its undisturbed neighbors. The SAFER process was prototyped for inclusion in the RSLC process over five regions within the conterminous United States (CONUS) and regional model performance, evaluated using 2016 data. Results show that the inclusion of the SAFER process increased the accuracies of the interim disturbance detections and thus has potential to reduce the time needed for analyst review. LF does not track the time taken by each analyst for each tile, and hence, the relative effort saved was parameterized as the percentage of 30 m pixels that are correctly classified in the SAFER outputs to the total number of pixels that are incorrectly classified in the interim disturbance and are presented. The SAFER prototype outputs showed that the relative analysts’ effort saved could be over 95%. The regional model performance evaluation showed that SAFER’s performance depended on the nature of disturbances and availability of cloud-free images relative to the time of disturbances. The accuracy estimates for CONUS were inferred by comparing the 2017 SAFER outputs to the 2017 analyst-reviewed data. As expected, the SAFER outputs had higher accuracies compared to the interim disturbances, and CONUS-wide relative effort saved was over 92%. The regional variation in the accuracies and effort saved are discussed in relation to the vegetation and disturbance type in each region. SAFER is now operationally integrated into the RSLC process, and LANDFIRE is well poised for annual updates, contingent on the availability of data.

Fire↗
USGS2025

Extracting data from maps: Lessons learned from the artificial intelligence for critical mineral assessment competition

The U.S. Geological Survey (USGS), Defense Advanced Projects Research Agency (DARPA), NASA Jet Propulsion Laboratory (JPL), and MITRE ran a 12-week machine learning competition aimed at accelerating development of AI tools for critical mineral assessments. The Artificial Intelligence for Critical Mineral Assessment Competition solicited innovative solutions for two challenges: 1) automated georeferencing of historical maps, and 2) automated feature extraction from historical maps. Competitors used a new dataset of historical map images to train, validate, and evaluate their models. Automated georeferencing pipelines attained a median root-mean square error of 1.1 km. Prompt-based extraction (i.e., with user input) of polygons, polylines, and points from geologic maps yielded median F1-scores of 0.77, 0.56, 0.35, respectively. Geologic maps pose numerous challenges for AI workflows because they vary significantly. However, despite its short duration, the competition yielded promising results that have since spurred further innovation in this area and led to the development of new AI tools to semi-automate key, time-consuming parts of the assessment workflow.

Applied Computing and Geosciences↗
USGS2025

Synergy between geology and geophysics in graphite mineral resource assessment

Graphite is designated as a critical mineral by the U.S. Government due to its essential role in modern technology and its vulnerability to supply chain disruption. To evaluate domestic graphite resources, the U.S. Geological Survey (USGS) conducted two airborne electromagnetic (AEM) surveys as part of the Earth Mapping Resources Initiative (Earth MRI) over prospective areas in the southern Appalachians of Alabama and the Seward Peninsula of Alaska. These surveys aimed to refine areas of interest by revealing subsurface electrical resistivity patterns indicative of graphite-bearing rocks. The results of the AEM surveys were integrated with existing geological knowledge and supplemented by field observations to assess the likelihood of undiscovered resources in these regions. This multidisciplinary approach combined geophysical techniques with traditional geological methods, enhancing the understanding of graphite potential in areas that may have been previously overlooked. The findings from this initiative are expected to contribute significantly to the ongoing efforts to secure a reliable domestic supply of graphite, thereby reducing import reliance and supporting national interests in mineral resource management.

Conference Paper↗
USGS2025

Three-dimensional seismic velocity model for the Cascadia Subduction Zone with shallow soils and topography, version 1.7

The U.S. Geological Survey’s seismic velocity model for the Cascadia Subduction Zone provides P- and S-wave velocity ( V P and V S , respectively) information from 40.2° to 50.0° N. latitude and −129.0° to −121.0° W. longitude, and is used to support a variety of research topics, including three-dimensional (3D) earthquake simulations and seismic hazard assessment in the Pacific Northwest. This report describes an update to the previous version (v) 1.6 of the 3D seismic velocity model for the Cascadia Subduction Zone. This new model (herein referred to as v1.7) contains more detailed near-surface structure for improved earthquake ground motion modeling. Updated features include the addition of a new shallow soil velocity model in the top few hundred meters and the option of adding user-specified topography. Although v1.6 of the Cascadia seismic velocity model has a minimum V S of 600 meters per second (m/s), the new model (v1.7) has a minimum V S of approximately 40 m/s. Overall, this update will allow for more accurate ground motion estimates from 3D simulations of scenario earthquakes in the Cascadia Subduction Zone region.

British Columbia, California, Oregon, Washington↗
USGS2026

Diverging mineral chemistry of iron and nickel throughout Earth’s changing redox conditions reveals foundation for their evolution as protein cofactors

Iron (Fe) and nickel (Ni) were both foundational to early metabolism, yet their biological trajectories diverged as Earth’s surface redox state changed. Here, we integrate mineral chemistry network analysis, protein metal-site coordination-sphere analysis, and curated redox comparisons to test how geochemistry and metalloprotein architecture co-evolved. Mineral network analyses show broader electronegativity variation and network diversity for Fe-bearing minerals through time relative to Ni-bearing minerals. In structural analyses of protein metal centers in a combined Fe/Ni protein structure set, it is shown that Fe- and Ni-associated environments differ in amino-acid composition, hydropathy structure, and cysteine representation. The greater chemical diversity and electronegativity variation in Fe minerals mirror the higher redox and structural versatility of Fe-binding proteins. The presence of Fe in a broader range of mineral and protein environments demonstrates the chemical adaptability of the metal, from the anoxic Archean to oxidative Earth surface conditions following the Great Oxidation Event. Iron, with its broad redox potential range in Fe-oxidoreductases, has a central role in both anaerobic and aerobic metabolisms. Nickel, by contrast, is less widespread in biology. Today, Ni is predominantly employed in deeply branching anaerobic pathways and by proteins with narrower redox potential ranges. Our results show that evolutionary processes, constrained by metal chemistry, habitually utilize Fe as a redox generalist while retaining Ni in specialized roles. The divergent paths of Ni and Fe, from rocks to proteins, demonstrate the intimate relationship between planetary geochemistry and metabolic origins on Earth and suggest that Fe/Ni geochemistry may inform habitability assessments in extraterrestrial environments when interpreted within specific planetary environmental contexts.

Life↗
USGS2024

The SCEC/USGS community stress drop validation study using the 2019 Ridgecrest earthquake sequence

We introduce a community stress drop validation study using the 2019 Ridgecrest, California, earthquake sequence, in which researchers are invited to use a common dataset to independently estimate comparable measurements using a variety of methods. Stress drop is the change in average shear stress on a fault during earthquake rupture, and as such is a key parameter in many ground motion, rupture simulation, and source physics problems in earthquake science. Spectral stress drop is commonly estimated by fitting the shape of the radiated energy spectrum, yet estimates for an individual earthquake made by different studies can vary hugely. In this community study, sponsored jointly by the U. S. Geological Survey and Southern/Statewide California Earthquake Center, we seek to understand the sources of variability and uncertainty in earthquake stress drop through quantitative comparison of submitted stress drops. The publicly available dataset consists of nearly 13,000 earthquakes of M1 to 7 from two weeks of the 2019 Ridgecrest sequence recorded on stations within 1-degree. As a community study, findings are shared through workshops and meetings and all are invited to join at any time, at any interest level.

Seismica↗
USGS2025

Submarine groundwater discharge creates cold‐water refugia that can mitigate exposure of heat stress in nearshore corals

Coral reef mortality around the world is accelerating due to human activities and rising sea temperatures that cause bleaching, which is expected to become more frequent. Our ability to predict which corals will be most resilient, however, remains limited due to insufficient information characterizing nearshore temperature and habitat conditions. In this study, we examine how submarine groundwater discharge (SGD) reduces nearshore water temperatures and exposure of corals to heat stress, complementing the understanding that SGD can adversely affect coral when it contains elevated nutrient concentrations. Data from fixed nearshore sensors and vertical depth profiles along ~100 km of the western shoreline of the Island of Hawai’i from 2003 to 2014 demonstrate that submarine groundwater discharge (SGD) can reduce nearshore water temperatures by 1 °C–5°C and create estuarine-like conditions with salinities as low as 20 PSU, where the prevalent coral species, Pocillopora meandrina, Porites lobata , and Montipora capitata , thrive. Time-series temperature records reveal that exposure to high ambient ocean temperatures, which are known to initiate bleaching events, are reduced up to 5%–46% of the time. Coral health surveys indicated coral bleaching in response to moderately high annual temperatures in 2010 and 2011, with more colonies affected farther from cold, SGD-fed waters. Synthesis of these results, along with coral response data following the more extreme marine heat wave of 2014–2015, demonstrates lower coral loss and greater coral recovery near groundwater seeps, particularly those with higher flux and influence on reducing nearshore water temperatures. Our results demonstrate that SGD may therefore provide a beneficial ecosystem service and enhance coral reef resilience, particularly where human-related nutrient additions to groundwater can be mitigated. The implications of our findings are relevant across tropical coasts where groundwater inputs can be substantial, such as the Caribbean and Indo-Pacific, and contribute to improving our understanding of coral sensitivity to gradients in temperature and nutrient stress. Improved management of groundwater resources could thus be vital to local–regional strategies for mitigating future heat stress.

Hawaii↗
USGS2026

Cultural benefits knowledge and social learning in Elwha River dam removal and ecosystem decision-making

In a retrospective case study of the seminal Elwha River dam removal in Washington State, USA, we explore pathways through which ecosystem services (ES) knowledge can inform environmental decision-making. We specifically investigate how knowledge of cultural benefits linked to the Elwha River ecosystem was made available. Through interviews and historical document review we identify diverse forms of cultural benefits knowledge (i.e., how individuals or groups know the contributions of an ecosystem to their identities, experiences, and capabilities), including both knowledge in the form of practices – embodied or enacted forms of knowledge, and knowledge in the form of products – quantitative or written documentation. Recognizing and learning from the diverse forms in which benefits knowledges are conveyed can support more accurate and equitable consideration of the diverse values, well-beings, and human-nature relationships linked to ecosystems. With this case study, we illuminate pathways for meaningful consideration of multiple knowledge forms, and the plural ecosystem values they convey, with relevance for environmental decision processes in the Puget Sound and beyond.

Washington↗
USGS2026

GST-1: A high-resolution global sediment thickness model

Global Sediment Thickness 1 (GST-1) is a high-resolution sedimentary thickness model calculated on a 0.125° x 0.125° grid. It modifies the sediment thickness of the 1° x 1° Earth Crustal Model 1 (ECM1) by means of 3D inversions of free air gravity anomalies. GST-1 is calculated by performing structural inversions on high-density contrasts across two crustal boundaries: the sediment – basement interface and the crystalline crust – upper mantle interface. The inversions are calculated in each of ten overlapping 3D models that span the globe. These ten models are merged to obtain the GST-1 global model, providing an eight-fold increase in lateral spatial resolution in comparison with ECM1 and CRUST 1.0. Our sediment thickness model exploits the nearly continuous sampling of gravity data when compared to the irregular, sparse sampling of seismic refraction data. Sediment thickness values in GST-1 are in excellent agreement with independently derived cross sections from well-studied sedimentary basins, and within expected resolution limits of seismic refraction data. GST-1 offers a robust, high resolution global model of sedimentary thickness to support studies of sedimentary basins.

Tectonophysics↗