USGS Science⌕ Search

SEARCH · USGS Science

Results for “The R Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources
USGS2005

Evolving force balance at Columbia Glacier, Alaska, during its rapid retreat

Changes in driving and resistive stresses play an essential role in governing the buoyancy forces that are important controls on the speed and irreversibility of tidewater glacier retreats. We describe changes in geometry, velocity, and strain rate and present a top-down force balance analysis performed over the lower reach of Columbia Glacier. Our analysis uses new measurements and estimates of basal topography and photogrammetric surface velocity measurements made between 1977 and 2001, while assuming depth-independent strain. Sensitivity tests show that the method is robust and insensitive to small changes in the calculation parameters. Spatial distributions of ice speed show little correspondence with driving stress. Instead, spatial patterns of ice speed exhibit a nonlinear correspondence with basal drag. Primary resistance to flow comes from basal drag, but lateral drag becomes increasingly more important throughout the retreat, which may account for observed increases in speed. Maximum basal drag is always located in a prominent constriction located ~12 km upstream from the preretreat terminus. Once the terminus retreated into deep water off the terminal moraine marking the modern maximum extent, the upstream location of this maximum basal drag helped to promote thinning and decrease effective pressure in the lower region by limiting replenishing ice flow from upstream. An increase in both ice velocity and calving resulted, initiating what appears to be an irreversible retreat. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗
USGS2008

Anatomy of the Chesapeake Bay impact structure revealed by seismic imaging, Delmarva Peninsula, Virginia, USA

A 30-km-long, radial seismic reflection and refraction survey completed across the northern part of the late Eocene Chesapeake Bay impact structure (CBIS) on the Delmarva Peninsula, Virginia, USA, confirms that the CBIS is a complex central-peak crater. We used a tomographic P wave velocity model and low-fold reflection images, constrained by data from two deep boreholes located on the profile, to interpret the structure and composition of the upper 5 km of crust. The seismic images exhibit well-defined structural features, including (with increasing radial distance) a collapsed central uplift, a breccia-filled moat, and a collapsed transient-crater margin (which collectively constitute a ???40-km-wide collapsed transient crater), and a shallowly deformed annular trough. These seismic images are the first to resolve the deep structure of the crater (>1 km) and the boundaries between the central uplift, moat, and annular trough. Several distinct seismic signatures distinguish breccia units from each other and from more coherent crystalline rocks below the central uplift, moat, and annular trough. Within the moat, breccia extends to a minimum depth of 1.5 km or a maximum of 3.5 km, depending upon the interpretation of the deepest layered materials. The images show ???350 to 500 m of postimpact sediments above the impactites. The imaged structure of the CBIS indicates a complex sequence of event during the cratering process that will provide new constraints for numerical modeling. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Surface albedo observations at Gusev Crater and Meridiani Planum, Mars

During the Mars Exploration Rover mission, the Pancam instrument has periodically acquired large-scale panoramic images with its broadband (739??338 nm) filter in order to estimate the Lambert bolometric albedo of the surface along each rover's traverse. In this work we present the full suite of such estimated albedo values measured to date by the Spirit and Opportunity rovers along their traverses in Gusev Crater and Meridiani Planum, respectively. We include estimated bolometric albedo values of individual surface features (e.g., outcrops, dusty plains, aeolian bed forms, wheel tracks, light-toned soils, and crater walls) as well as overall surface averages of the 43 total panoramic albedo data sets acquired to date. We also present comparisons to estimated Lambert albedo values taken from the Mars Global Surveyor Mars Orbiter Camera (MOC) along the rovers' traverses, and to the large-scale bolometric albedos of the sites from the Viking Orbiter Infrared Thermal Mapper (IRTM) and Mars Global Surveyor/Thermal Emission Spectrometer (TES). The ranges of Pancam-derived albedos at Gusev Crater (0.14 to 0.25) and in Meridiani Planum. (0.10 to 0.18) are in good agreement with IRTM, TES, and MOC orbital measurements. These data sets will be a useful tool and benchmark for future investigations of albodo variations with time, including measurements from orbital instruments like the Context Camera and High Resolution Imaging Science Experiment on Mars Reconnaissance Orbiter. Long-term, accurate albedo measurements could also be important for future efforts in climate modeling as well as for studies of active surface processes. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2008

Distributed energy balance modeling of South Cascade Glacier, Washington and assessment of model uncertainty

We have developed a physically based, distributed surface energy balance model to simulate glacier mass balance under meteorological and climatological forcing. Here we apply the model to estimate summer ablation on South Cascade Glacier, Washington, for the 2004 and 2005 mass balance seasons. To arrive at optimal mass balance simulations, we investigate and quantify model uncertainty associated with selecting from a range of physical parameter values that are not commonly measured in glaciological mass balance field studies. We optimize the performance of the model by varying values for atmospheric transmissivity, the albedo of surrounding topography, precipitation-elevation lapse rate, surface roughness for turbulent exchange of momentum, and snow albedo aging coefficient. Of these the snow aging parameter and precipitation lapse rates have the greatest influence on the modeled ablation. We examined model sensitivity to varying parameters by performing an additional 103 realizations with parameters randomly chosen over a ??5% range centered about the optimum values. The best fit suite of model parameters yielded a net balance of -1.69??0.38 m water equivalent (WE) for the 2004 water year and -2.10??0.30 m WE up to 11 September 2005. The 2004 result is within 3% of the measured value. These simulations account for 91% and 93% of the variance in measured ablation for the respective years. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗
USGS2010

Seismic source mechanism of degassing bursts at Kilauea volcano, Hawaii: Results from waveform inversion in the 10–50 s band

The current (March 2008 to February 2009) summit eruptive activity at Kilauea Volcano is characterized by explosive degassing bursts accompanied by very long period (VLP) seismic signals. We model the source mechanisms of VLP signals in the 10–50 s band using data recorded for 15 bursts with a 10‐station broadband network deployed in the summit caldera. To determine the source centroid location and source mechanism, we minimize the residual error between data and synthetics calculated by the finite difference method for a point source embedded in a homogeneous medium that takes topography into account. The VLP signals associated with the bursts originate in a source region ∼1 km below the eastern perimeter of Halemaumau pit crater. The observed waveforms are well explained by the combination of a volumetric component and a vertical single force component. For the volumetric component, several source geometries are obtained which equally explain the observed waveforms. These geometries include (1) a pipe dipping 64° to the northeast; (2) two intersecting cracks including an east striking crack (dike) dipping 80° to the north, intersecting a north striking crack (another dike) dipping 65° to the east; (3) a pipe dipping 58° to the northeast, intersecting a crack dipping 48° to the west–southwest; and (4) a pipe dipping 57° to the northeast, intersecting a pipe dipping 58° to the west–southwest. Using the dual‐crack model as reference, the largest volume change obtained among the 15 bursts is ∼24,400 m 3 , and the maximum amplitude (peak to peak) of the force is ∼20 GN. Each burst is marked by a similar sequence of deflation and inflation, trailed by decaying oscillations of the volumetric source. The vertical force is initially upward, synchronous with source deflation, then downward, synchronous with source reinflation, followed by oscillations with polarity opposite to the volumetric oscillations. This combination of force and volume change is attributed to pressure and momentum changes induced during a fluid dynamic source mechanism involving the ascent, expansion, and burst of a large slug of gas within the upper ∼150 m of the magma conduit. As the slug expands upon approach to the surface and more liquid becomes wall supported by viscous shear forces, the pressure below the slug decreases, inducing conduit deflation and an upward force on the Earth. The final rapid slug expansion and burst stimulate VLP and LP oscillations of the conduit system, which slowly decay due to viscous dissipation and elastic radiation. Consideration of the fluid dynamic arguments leads us to prefer the dual‐crack VLP source model as it is the only candidate model capable of producing plausible values of length scales and pressure changes. The magnitudes of the vertical forces observed in the 15 bursts appear consistent with slug masses of 10 4 to 10 6 kg.

Hawaii↗
USGS2009

Global distribution of bedrock exposures on Mars using THEMIS high-resolution thermal inertia

We investigate high thermal inertia surfaces using the Mars Odyssey Thermal Emission Imaging System (THEMIS) nighttime temperature images (100 m/pixel spatial sampling). For this study, we interpret any pixel in a THEMIS image with a thermal inertia over 1200 J m -2 K -1 s -1/2 as "bedrock" which represents either in situ rock exposures or rock-dominated surfaces. Three distinct morphologies, ranked from most to least common, are associated with these high thermal inertia surfaces: (1) valley and crater walls associated with mass wasting and high surface slope angles; (2) floors of craters with diameters >25 km and containing melt or volcanics associated with larger, high-energy impacts; and (3) intercrater surfaces with compositions significantly more mafic than the surrounding regolith. In general, bedrock instances on Mars occur as small exposures (less than several square kilometers) situated in lower-albedo (<0.18), moderate to high thermal inertia (>350 J m -2 K -1 s -1/2 ), and relatively dust-free (dust cover index <0.95) regions; however, there are instances that do not follow these generalizations. Most instances are concentrated in the southern highlands, with very few located at high latitudes (poleward of 45 o N and 58 o S), suggesting enhanced mechanical breakdown probably associated with permafrost. Overall, Mars has very little exposed bedrock with only 960 instances identified from 75 o S to 75 o N with likely <3500 km 2 exposed, representing???1% of the total surface area. These data indicate that Mars has likely undergone large-scale surface processing and reworking, both chemically and mechanically, either destroying or masking a majority of the bedrock exposures on the planet. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2011

Seismically observed seiching in the Panama Canal

A large portion of the seismic noise spectrum is dominated by water wave energy coupled into the solid Earth. Distinct mechanisms of water wave induced ground motions are distinguished by their spectral content. For example, cultural noise is generally <1 s period, microseisms dominate the seismic spectrum from periods of 2 to 20 s, and the Earth's "hum" is in the range of 50 to 600 s. We show that in a large lake in the Panama Canal there is an additional source of long-period noise generated by standing water waves, seiches, induced by disturbances such as passing ships and wind pressure. We compare seismic waveforms to water level records and relate these observations to changes in local tilt and gravity due to an oscillating seiche. The methods and observations discussed in this paper provide a first step toward quantifying the impact of water inundation as recorded by seismometers. This type of quantified understanding of water inundation will help in future estimates of similar phenomena such as the seismic observations of tsunami impact. Copyright 2011 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS2011

Temporal observations of bright soil exposures at Gusev crater, Mars

The Mars Exploration Rover Spirit has discovered bright soil deposits in its wheel tracks that previously have been confirmed to contain ferric sulfates and/or opaline silica. Repeated Pancam multispectral observations have been acquired at four of these deposits to monitor spectral and textural changes over time during exposure to Martian surface conditions. Previous studies suggested that temporal spectral changes occur because of mineralogic changes (e.g., phase transitions accompanying dehydration). In this study, we present a multispectral and temporal analysis of eight Pancam image sequences at the Tyrone exposure, three at the Gertrude Weise exposure, two at the Kit Carson exposure, and ten at the Ulysses exposure that have been acquired as of sol 2132 (1 January 2010). We compare observed variations in Pancam data to spectral changes predicted by laboratory experiments for the dehydration of ferric sulfates. We also present a spectral analysis of repeated Mars Reconnaissance Orbiter HiRISE observations spanning 32 sols and a textural analysis of Spirit Microscopic Imager observations of Ulysses spanning 102 sols. At all bright soil exposures, we observe no statistically significant spectral changes with time that are uniquely diagnostic of dehydration and/or mineralogic phase changes. However, at Kit Carson and Ulysses, we observe significant textural changes, including slumping within the wheel trench, movement of individual grains, disappearance of fines, and dispersal of soil clods. All observed textural changes are consistent with aeolian sorting and/or minor amounts of air fall dust deposition.

Journal of Geophysical Research↗
USGS2019

High rates of inflation during a noneruptive episode of seismic unrest at Semisopochnoi Volcano, Alaska in 2014–2015

Magma intrusion rate is a key parameter in eruption triggering but is poorly quantified in existing geodetic studies. Here we examine two episodes of rapid inflation in this context. Two noneruptive microseismic swarms were recorded at Semisopochnoi Volcano, Alaska in 2014–2015. We use differential SAR techniques and TerraSAR‐X images to document surface deformation from 2011 to 2015, which comprises island‐wide radial inflation totaling ~25 cm (+/−1 cm) line of sight displacement in 2014–2015. Multiple source geometries are tested in an inversion of the deformation data, and InSAR data are best fit by a spheroid trending to the northeast and plunging to the southeast, with a major axis of ~4 km and minor axes of ~1 km, directly under the central caldera of Semisopochnoi. In 2014, a modeled influx of 0.043 km 3 of magma caused line of sight displacement of ~17 cm. This magma was stored at a depth of ~8 km, until 2015 when 0.029 km 3 was added. Along with the definition of inflation source parameters, the recorded seismic events are relocated using differential travel times. These relocated events outline a linear aseismic area within a larger zone of shallow (<10 km) seismicity. This aseismic region aligns with the centroid of the deformation model. Based on these geodetic and seismic models, the plumbing system at Semisopochnoi is interpreted as a spheroidal magma storage zone at a depth of ˜8 km below a linear feature of partial melt. The observed deformation and seismicity appear to result from rapid injection into this main storage region.

Alaska↗
USGS2019

Insights into pāhoehoe lava emplacement using visible and thermal structure-from-motion photogrammetry

We present the evolution over 3 months of a 2016–2017 pāhoehoe flow at Kīlauea as it changed from a narrow sheet flow into a compound lava field fed by a stable system of tubes. The portion of the flow located on Kīlauea's coastal plain was characterized using helicopter‐based visible and thermal structure‐from‐motion photogrammetry to construct a series of georeferenced digital surface models and thermal maps on eight different days. Results reveal key influences on the emplacement and evolution of such long‐lived pāhoehoe flows. This region of the flow grew by ~12 × 10 6 m 3 with a near‐constant time‐average discharge rate of 1.2–2.7 m 3 /s. The development of two tube systems is captured and shows an initial nascent tube enhanced by a narrow topographic confinement, which later inflated and created a topographic inversion that modulated the emplacement of a second flow lobe with its own tube system. The analysis of breakouts at various stages of the field's life suggests that the evolution of the thermal and morphological properties of the flow surface reflect its maturity. Thermal properties of breakouts were used to expand the empirical relationship of breakout cooling to longer timescales. This study contributes to the long‐term development and validation of more accurate predictive models for pāhoehoe, required during the management of long‐lasting lava flow crises in Hawai'i and elsewhere.

Hawaii↗
USGS2020

Geodetic measurements of slow slip events southeast of Parkfield, CA

Tremor and low-frequency earthquakes are presumed to be indicative of surrounding slow, aseismic slip that is often below geodetic detection thresholds. This study uses data from borehole seismometers and long-baseline laser strainmeters to observe both the seismic and geodetic signatures of episodic tremor and slip on the Parkfield region of the San Andreas Fault near Cholame, CA. The observed occurrence rates of both the tremors and co-located families of low-frequency earthquakes are not steady but instead exhibit quasiperiodic bursts of increased activity. We show that these periods of elevated seismic activity correlate with statistically significant stacked strain signals consisting of 44 slow-slip events. Modeled individual slow-slip events and their total summed moment, which are constrained by seismic signals and stacked strain, respectively, indicate that the individual moment magnitudes of these events range from 4.6–5.2. We find that the measured geodetic signal likely precedes the seismic signal by several hours, consistent with the aseismic slip preceding and driving the observed seismic tremor activity. We confirm that strike-slip faults, in addition to subduction zones, are capable of producing episodic tremor and slip.

California↗
USGS2020

Dust deposited on snow cover in the San Juan Mountains, Colorado, 2011-2016: Compositional variability bearing on snow-melt effects

Light-absorbing particles in atmospheric dust deposited on snow cover (dust-on-snow, DOS) diminish albedo and accelerate the timing and rate of snow melt. Identification of these particles and their effects are relevant to snow-radiation modeling and thus water-resource management. Laboratory-measured reflectance of DOS samples from the San Juan Mountains (USA) were compared with DOS mass loading, particle sizes, iron mineralogy, carbonaceous matter type and content, and chemical compositions. Samples were collected each spring for water years 2011-2016, when individual dust layers had merged into one (all layers merged) at the snow surface. Average reflectance values of the six samples were 0.2153 (sd, 0.0331) across the visible wavelength region (0.4-0.7 µm) and 0.3570 (sd, 0.0498) over the full-measurement range (0.4-2.50 µm). Reflectance values correlated inversely to concentrations of ferric oxide, organic carbon (1.4-10 wt. %), magnetite (0.05-0.13 wt. %), and silt (PM63-3.9; median grain sizes averaged 21.4 µm) but lacked correspondence to total iron and PM10 contents. Measurements of reflectance and Mössbauer spectra and magnetic properties indicated that microcrystalline hematite and nano-size goethite were primarily responsible for diminished visible reflectance. Positive correlations between organic carbon and metals attributed to fossil-fuel combustion, with observations from electron microscopy, indicated that some carbonaceous matter occurred as black carbon. Magnetite was a surrogate for related light-absorbing minerals, dark rock particles, and contaminants. Similar analyses of DOS from other areas would help evaluate the influences of varied dust sources, wind-storm patterns, and anthropogenic inputs on snow melt and water resources in and beyond the Colorado River basin.

Colorado↗
USGS2021

Movement of sediment through a burned landscape: Sediment volume observations and model comparisons in the San Gabriel Mountains, California, USA

Post-wildfire changes to hydrologic and geomorphic systems can lead to widespread sediment redistribution. Understanding how sediment moves through a watershed is crucial for assessing hazards, developing debris flow inundation models, engineering sediment retention solutions, and quantifying the role that disturbances play in landscape evolution. In this study, we used terrestrial and airborne lidar to measure sediment redistribution in the 2016 Fish Fire, in the San Gabriel Mountains in southern California, USA. The lidar areas are in two adjacent watersheds, at spatial scales of 900 m 2 to 4 km 2 , respectively. Terrestrial lidar data were acquired prior to rainfall, and two subsequent surveys show erosional change after rainstorms. Two airborne lidar flights occurred (1) 7 months before, and (2) 14 months after the fire ignition, capturing the erosional effects after rainfall. We found hillslope erosion dominated the overall sediment budget in the first rainy season after wildfire. Only 7% of the total erosion came from the active channel bed and channel banks, and the remaining 93% of eroded sediment was derived from hillslopes. Within the channelized portion of the watershed erosion/deposition could be generally described with topographic metrics used in a stream power equation. Observed sediment volumes were compared with four empirical models and one process-based model. We found that the best predictions of sediment volume were obtained from an empirical model developed in the same physiographic region. Moreover, this study showed that post-wildfire erosion rates in the San Gabriel Mountains attain the same magnitude as millennial time scale bedrock erosion rates.

California↗
USGS2021

Carbon fluxes and microbial activities from boreal peatlands experiencing permafrost thaw

Permafrost thaw in northern ecosystems may cause large quantities of carbon (C) to move from soil to atmospheric pools. Because soil microbial communities play a critical role in regulating C fluxes from soils, we examined microbial activity and greenhouse gas production soon after permafrost thaw and ground collapse (into collapse-scar bogs), relative to the permafrost plateau or older thaw features. Using multiple field and laboratory-based assays at a field site in interior Alaska, we show that the youngest collapse-scar bog had the highest CH 4 production potential from soil incubations, and, based upon temporal changes in porewater concentrations and 13 C-CH 4 and 13 C-CO 2 , had greater summer in situ rates of respiration, methanogenesis, and surface CH 4 oxidation. These patterns could be explained by greater C and N availability in the young bog, while alternative terminal electron accepting processes did not play a significant role. Field diffusive CH 4 fluxes from the young bog were 4.1 times greater in the shoulder season and 1.7–7.2 times greater in winter relative to older bogs, but not during summer. Greater relative CH 4 flux rates in the shoulder season and winter could be due to reduced CH 4 oxidation relative to summer, magnifying the importance of differences in production. Both the permafrost plateau and collapse-scar bogs were sources of C to the atmosphere due in large part to winter C fluxes. In collapse scar bogs, winter is a critical period when differences in thermokarst age translates to differences in surface fluxes.

Alaska↗
USGS2022

Insights on multistage rock avalanche behavior from runout modeling constrained by seismic inversions

Inversion of low-frequency regional seismic records to solve for a time series of bulk forces exerted on the earth by a landslide (a force-time function) is increasingly being used to infer volumes and dynamics of large, highly energetic landslides, such as rock avalanches and flowslides, and to provide calibration information on event dynamics and volumes for numerical landslide runout models. Much of the work to date using landslide runout modeling constrained by seismic data has focused on using single-phase models with frictional or velocity-weakening rheologies. Awareness of multistage landslide initiations is increasing, with discrete failures separated in time contributing to the final impact of an event. Our work utilizes a method for incorporating seismic data as a calibration constraint for landslide runout models, considering variable rheologies and different initiation conditions. This study presents a systematic examination of multiple rheologies and initiation conditions, and shows how these factors affect the force-time function derived from the landslide runout model. Our work confirms that, while rheology and fragmenting or initially coherent initiations affect the force-time function, multiple collapses separated by tens of seconds have the greatest impact on the shape and amplitude. We apply this method to the analysis of three real rock avalanches to better constrain plausible initiation conditions and rheology parameters using both seismic and field data. This study provides insights on how assumptions about the initiation dynamics of the source zone and the runout model definition can aid in the interpretation of seismic inversions for multistage rock avalanches.

Journal of Geophysical Research: Solid Earth↗
USGS1996

Gravity field over the Sea of Galilee: Evidence for a composite basin along a transform fault

The Sea of Galilee (Lake Kinneret) is located at the northern portion of the Kinneret-Bet Shean basin, in the northern Dead Sea transform. Three hundred kilometers of continuous marine gravity data were collected in the lake and integrated with land gravity data to a distance of more than 20 km around the lake. Analyses of the gravity data resulted in a free-air anomaly map, a variable density Bouguer anomaly map, and a horizontal first derivative map of the Bouguer anomaly. These maps, together with gravity models of profiles across the lake and the area south of it, were used to infer the geometry of the basins in this region and the main faults of the transform system. The Sea of Galilee can be divided into two units. The southern half is a pull-apart that extends to the Kinarot Valley, south of the lake, whereas the northern half was formed by rotational opening and transverse normal faults. The deepest part of the basinal area is located well south of the deepest bathymetric depression. This implies that the northeastern part of the lake, where the bathymetry is the deepest, is a young feature that is actively subsiding now. The pull-apart basin is almost symmetrical in the southern part of the lake and in the Kinarot Valley south of the lake. This suggests that the basin here is bounded by strike-slip faults on both sides. The eastern boundary fault extends to the northern part of the lake, while the western fault does not cross the northern part. The main factor controlling the structural complexity of this area is the interaction of the Dead Sea transform with a subperpendicular fault system and rotated blocks.

Sea of Galilee↗
USGS1997

Continuous monitoring of surface deformation at Long Valley Caldera, California, with GPS

Continuous Global Positioning System (GPS) measurements at Long Valley Caldera, an active volcanic region in east central California, have been made on the south side of the resurgent dome since early 1993. A site on the north side of the dome was added in late 1994. Special adaptations for autonomous operation in remote regions and enhanced vertical precision were made. The data record ongoing volcanic deformation consistent with uplift and expansion of the surface above a shallow magma chamber. Measurement precisions (1 standard error) for “absolute” position coordinates, i.e., relative to a global reference frame, are 3–4 mm (north), 5–6 mm (east), and 10–12 mm (vertical) using 24 hour solutions. Corresponding velocity uncertainties for a 12 month period are about 2 mm/yr in the horizontal components and 3–4 mm/yr in the vertical component. High precision can also be achieved for relative position coordinates on short (less than 10 km) baselines using broadcast ephemerides and observing times as short as 3 hours, even when data are processed rapidly on site. Comparison of baseline length changes across the resurgent dome between the two GPS sites and corresponding two-color electronic distance measurements indicates similar extension rates within error (∼2 mm/yr) once we account for a random walk noise component in both systems that may reflect spurious monument motion. Both data sets suggest a pause in deformation for a 3.5 month period in mid-1995, when the extension rate across the dome decreased essentially to zero. Three dimensional positioning data from the two GPS stations suggest a depth (5.8±1.6 km) and location (west side of the resurgent dome) of a major inflation center, in agreement with other geodetic techniques, near the top of a magma chamber inferred from seismic data. GPS systems similar to those installed at Long Valley can provide a practical method for near real-time monitoring and hazard assessment on many active volcanoes.

Journal of Geophysical Research B: Solid Earth↗
USGS1997

Strengths of serpentinite gouges at elevated temperatures

Serpentinite has been proposed as a cause of both low strength and aseismic creep of fault zones. To test these hypotheses, we have measured the strength of chrysotile-, lizardite-, and antigorite-rich serpentinite gouges under hydrothermal conditions, with emphasis on chrysotile, which has thus far received little attention. At 25°C, the coefficient of friction, μ, of chrysotile gouge is roughly 0.2, whereas the lizardite- and antigorite-rich gouges are at least twice as strong. The very low room temperature strength of chrysotile is a consequence of its unusually high adsorbed water content. When the adsorbed water is removed, chrysotile is as strong as pure antigorite gouge at room temperature. Heating to ∼200°C causes the frictional strengths of all three gouges to increase. Limited data suggest that different polytypes of a given serpentine mineral have similar strengths; thus deformation-induced changes in polytype should not affect fault strength. At 25°C, the chrysotile gouge has a transition from velocity strengthening at low velocities to velocity weakening at high velocities, consistent with previous studies. At temperatures up to ∼200°C, however, chrysotile strength is essentially independent of velocity at low velocities. Overall, chrysotile has a restricted range of velocity-strengthening behavior that migrates to higher velocities with increasing temperature. Less information on velocity dependence is available for the lizardite and antigorite gouges, but their behavior is consistent with that outlined for chrysotile. The marked changes in velocity dependence and strength of chrysotile with heating underscore the hazards of using room temperature data to predict fault behavior at depth. The velocity behavior at elevated temperatures does not rule out serpentinite as a cause of aseismic slip, but in the presence of a hydrostatic fluid pressure gradient, all varieties of serpentine are too strong to explain the apparent weakness of faults such as the San Andreas.

Journal of Geophysical Research B: Solid Earth↗