SEARCH · USGS Science

Results for “One Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources

USGS2026

Carbon sequestration along a gradient of tidal marsh degradation in response to sea level rise

Tidal marshes are considered one of the world's most efficient ecosystems for belowground organic carbon sequestration and hence climate mitigation. Marsh systems are however also vulnerable to degradation due to climate-induced sea level rise, whereby marsh vegetation conversion to open water often follows distinct spatial patterns: levees (i.e. marsh zones < 10 m from tidal creeks) show lower vulnerability of vegetation conversion to open water than basins (i.e. interior marsh zones > 30 m from creeks). Here, we use sediment cores to investigate spatial variations in organic carbon accumulation rates (OCAR) in a microtidal system (Blackwater marshes, Maryland, USA): (1) across a gradient of marsh zones with increasing marsh degradation, assessed as increasing ratio of unvegetated versus vegetated marsh area and (2) by comparing levees versus basins. We show that OCAR is up to four times higher on marsh levees than in adjacent basins. The data suggest that this is caused by spatial variation in three processes: sediment accretion rate, vegetation productivity, and sediment compaction, which are all higher on levees. Additionally, OCAR was observed to increase with increasing degree of marsh degradation in response to sea level rise. We hypothesize this may be due to more soil waterlogging in more degraded marsh zones, which may decrease carbon decomposition. Our results highlight that tidal marsh levees, in a microtidal system, are among the fastest soil organic carbon sequestration systems on Earth, and that both levees and basins sustain their carbon accumulation rate along gradients of increasing marsh degradation in response to sea level rise.

Maryland↗

USGS1988

An improved dark-object subtraction technique for atmospheric scattering correction of multispectral data

Digital analysis of remotely sensed data has become an important component of many earth-science studies. These data are often processed through a set of preprocessing or “clean-up” routines that includes a correction for atmospheric scattering, often called haze. Various methods to correct or remove the additive haze component have been developed, including the widely used dark-object subtraction technique. A problem with most of these methods is that the haze values for each spectral band are selected independently. This can create problems because atmospheric scattering is highly wavelength-dependent in the visible part of the electromagnetic spectrum and the scattering values are correlated with each other. Therefore, multispectral data such as from the Landsat Thematic Mapper and Multispectral Scanner must be corrected with haze values that are spectral band dependent. An improved dark-object subtraction technique is demonstrated that allows the user to select a relative atmospheric scattering model to predict the haze values for all the spectral bands from a selected starting band haze value. The improved method normalizes the predicted haze values for the different gain and offset parameters used by the imaging system. Examples of haze value differences between the old and improved methods for Thematic Mapper Bands 1, 2, 3, 4, 5, and 7 are 40.0, 13.0, 12.0, 8.0, 5.0, and 2.0 vs. 40.0, 13.2, 8.9, 4.9, 16.7, and 3.3, respectively, using a relative scattering model of a clear atmosphere. In one Landsat multispectral scanner image the haze value differences for Bands 4, 5, 6, and 7 were 30.0, 50.0, 50.0, and 40.0 for the old method vs. 30.0, 34.4, 43.6, and 6.4 for the new method using a relative scattering model of a hazy atmosphere.

Arizona↗

USGS2023

Dense geophysical observations reveal a triggered, concurrent multi-fault rupture at the Mendocino Triple Junction

A central question of earthquake science is how far ruptures can jump from one fault to another, because cascading ruptures can increase the shaking of a seismic event. Earthquake science relies on earthquake catalogs and therefore how complex ruptures get documented and cataloged has important implications. Recent investments in geophysical instrumentation allow us to resolve increasingly complex, multi-fault ruptures for even moderate-sized earthquakes. We combine dense seismic and geodetic measurements to reveal an enigmatic rupture in late 2021 at the Mendocino Triple Junction in northern California. We show that rupture was dynamically triggered, yet concurrent, on two distinct faults roughly 30 km apart. Thus, this rupture combines features of complex ruptures usually considered to be single earthquakes, and triggered ruptures considered as multiple earthquakes. This event illustrates that moderate-sized earthquakes can exhibit similar complexity to that more commonly documented for large earthquakes.

California↗

USGS2015

GEAR1: A Global Earthquake Activity Rate model constructed from geodetic strain rates and smoothed seismicity

Global earthquake activity rate model 1 (GEAR1) estimates the rate of shallow earthquakes with magnitudes 6–9 everywhere on Earth. It was designed to be reproducible and testable. Our preferred hybrid forecast is a log–linear blend of two parent forecasts based on the Global Centroid Moment Tensor (CMT) catalog (smoothing 4602 m≥5.767 shallow earthquakes, 1977–2004) and the Global Strain Rate Map version 2.1 (smoothing 22,415 Global Positioning System velocities), optimized to best forecast the 2005–2012 Global CMT catalog. Strain rate is a proxy for fault stress accumulation, and earthquakes indicate stress release, so a multiplicative blend is desirable, capturing the strengths of both approaches. This preferred hybrid forecast outperforms its seismicity and strain‐rate parents; the chance that this improvement stems from random seismicity fluctuations is less than 1%. The preferred hybrid is also tested against the independent parts of the International Seismological Centre‐Global Earthquake Model catalog (m≥6.8 during 1918–1976) with similar success. GEAR1 is an update of this preferred hybrid. Comparing GEAR1 to the Uniform California Earthquake Rupture Forecast Version 3 (UCERF3), net earthquake rates agree within 4% at m≥5.8 and at m≥7.0. The spatial distribution of UCERF3 epicentroids most resembles GEAR1 after UCERF3 is smoothed with a 30 km kernel. Because UCERF3 has been constructed to derive useful information from fault geometry, slip rates, paleoseismic data, and enhanced seismic catalogs (not used in our model), this is encouraging. To build parametric catastrophe bonds from GEAR1, one could calculate the magnitude for which there is a 1% (or any) annual probability of occurrence in local regions.

Bulletin of the Seismological Society of America↗

USGS1999

An interpretation of the 1997 airborne electromagnetic (AEM) survey, Fort Huachuca vicinity, Cochise County, Arizona

Executive Summary -- In March of 1997, an airborne electromagnetic (AEM) survey of the Fort Huachuca Military Reservation and immediate surrounds (location map, http://geopubs.wr.usgs.gov/open-file/of99-007-b/index.jpg) was conducted. This survey was sponsored by the U.S. Army and contracted through the Geologic Division of the U.S. Geological Survey (USGS). Data were gathered by Geoterrex-Dighem Ltd. of Ottawa, Canada. The survey aircraft is surrounded by a coil through which a large current pulse is passed. This pulse induces currents in the Earth which are recorded by a set of three mutually perpendicular coils towed in a 'bird' about 100 m behind and below the aircraft. The bird also records the Earth's magnetic field. The system samples the Earth response to the electromagnetic pulse about every 16 m along the aircraft flight path. For this survey, the bulk of the flightpaths were spaced about 400 m apart and oriented in a northeast-southwest direction extending from bedrock over the Huachuca Mountains to bedrock over the Tombstone Hills. A preliminary report on the unprocessed data collected in the field was delivered to the U.S. Army by USGS in July 1997 (USGS Open-File Report 97?457). The final data were delivered in March, 1998 by the contractor to USGS and thence to the U.S. Army. The present report represents the final interpretive report from USGS. The objectives of the survey were to: 1) define the structure of the San Pedro basin in the Sierra Vista-Fort Huachuca-Huachuca City area, including the depth and shape of the basin, and to delineate large faults that may be active within the basin fill and therefore important in the hydrologic regime; 2) define near surface and subsurface areas that contain a large volume fraction of silt and clay in the basin fill and which both reduce the volume of available storage for water and reduce the permeability of the aquifer; and 3) to evaluate the use of the time domain electromagnetic method in the southwest desert setting as a means of mapping depth to water. Chapter one, written by M.E. Gettings, reports the results of the analysis of the aeromagnetic anomaly data. Depths to magnetic rocks computed from these data are in good agreement with depths from gravity anomaly models (Gettings and Houser, in prep.) and confirm and refine the location of the bedrock highs which reach to within 200 m of the surface in several parts of the study area. The highly faulted and generally shallow character of the basin within the study area deduced from the gravity studies is also evident in the aeromagnetic data. The caldera ring fault delimiting the buried structural southwest edge of the Tombstone caldera is expressed in the magnetic data and deeper intrusives extending outside the caldera to the southwest are inferred. Several magnetic bodies occur at shallow depths within the Precambrian granite of the Huachuca Mountains along the eastern foothills of the mountains. These are inferred to be Tertiary intrusives but remain to be confirmed by field work if any of their uppermost dikes or apotheses are exposed. Faults delineating the east-west trending bedrock high beneath the city of Sierra Vista appear to be shallow and should be investigated for surface expressions. Chapter two, written by Jeff Wynn, analyzes and interprets the conductivity depth transforms (CDTs) and provides a general evaluation of the data quality. He concludes that there is a good general correlation between the uppermost conductor seen in the CDTs and water table depth in many cases. Detailed comparisons between the ground-based vertical electric soundings (VES) and the CDTs are reported in this chapter. The two sets of data compare well in general for most sounding sites where the VES data are not noisy.

Arizona↗

USGS2020

A long-term geothermal observatory across subseafloor gas hydrates, IODP Hole U1364A, Cascadia accretionary prism

We report 4 years of temperature profiles collected from May 2014 to May 2018 in Integrated Ocean Drilling Program Hole U1364A in the frontal accretionary prism of the Cascadia subduction zone. The temperature data extend to depths of nearly 300 m below seafloor (mbsf), spanning the gas hydrate stability zone at the location and a clear bottom-simulating reflector (BSR) at ∼230 mbsf. When the hole was drilled in 2010, a pressure-monitoring Advanced CORK (ACORK) observatory was installed, sealed at the bottom by a bridge plug and cement below 302 mbsf. In May 2014, a temperature profile was collected by lowering a probe down the hole from the ROV ROPOS. From July 2016 through May 2018, temperature data were collected during a nearly two-year deployment of a 24-thermistor cable installed to 268 m below seafloor (mbsf). The cable and a seismic-tilt instrument package also deployed in 2016 were connected to the Ocean Networks Canada (ONC) NEPTUNE cabled observatory in June of 2017, after which the thermistor temperatures were logged by Ocean Networks Canada at one-minute intervals until failure of the main ethernet switch in the integrated seafloor control unit in May 2018. The thermistor array had been designed with concentrated vertical spacing around the bottom-simulating reflector and two pressure-monitoring screens at 203 and 244 mbsf, with wider thermistor spacing elsewhere to document the geothermal state up to seafloor. The 4 years of data show a generally linear temperature gradient of 0.055°C/m consistent with a heat flux of 61–64 mW/m 2 . The data show no indications of thermal transients. A slight departure from a linear gradient provides an approximate limit of ∼10 −10 m/s for any possible slow upward advection of pore fluids. In-situ temperatures are ∼15.8°C at the BSR position, consistent with methane hydrate stability at that depth and pressure.

Cascadia subduction zone↗

USGS1947

Geology of the lead-silver deposits of the Clark Fork district, Bonner County, Idaho

This report gives the results of a reinvestigation of the lead-silver deposits of the Clark Fork district, Bonner County, Idaho, which since the late twenties have been the most important producers of lead-silver ore in northern Idaho outside of the Coeur d'Alene district, their production up to the end of 1941 having been more than $1,200,000. The deposits closely resemble those in the Coeur d'Alene district. They are fillings and replacements along minor low-angle thrust and high-angle reverse faults, which genetically are related to the Hope fault, a great transverse earth fracture, which provides the same sort of structural background for this district that the famous Osburn fault does for the Coeur d'Alene district. The deposits are contained in the Wallace and Striped Peak formations, members of the pre-Cambrian Belt series, and are closely associated with faulting and igneous activity that is probably of early Tertiary age. The mineralization has not been so extensive as in the Coeur d'Alene district, but the deposits, though comparatively small, are rich. Much of the ore is in compact seams and lenses a few inches thick, but stringers of ore and subordinate fractures along which grains of sulfide are disseminated extend across zones that are commonly 2 to 4 feet and exceptionally as much as 8 feet in width. The ore is mainly sulfide ore of the Coeur d'Alene type, consisting dominantly of galena, which is accompanied by lesser quantities of siderite, quartz, and sphalerite and by still smaller quantities of pyrite, arsenopyrite, tetrahedrite, and calcite. Some of the deposits, however, have been substantially enriched by the addition of hypogene silver and antimony minerals, so that much of the ore being mined has a higher silver content than any of that in the Coeur d'Alene district. The hypogene minerals include lead sulfantimonites and sulfarsenites, copper-lead sulfantimonites, and ruby silver. These minerals are absent from only one of the mines, and in one of the mines they form the bulk of the ore that is now being taken out. The high silver content of some of the ore is due in part to the presence of pyrargyrite (3Ag2S.SbS:4). The deposits apparently were formed at moderate depths and at moderate temperatures. It is believed that the ore will persist to depths appreciably greater than those yet reached in mining. The district has not yet been adequately explored, and undiscovered ore bodies may remain hidden beneath glacial and other surface debris.

Idaho↗

USGS2009

Mapping Curie temperature depth in the western United States with a fractal model for crustal magnetization

We have revisited the problem of mapping depth to the Curie temperature isotherm from magnetic anomalies in an attempt to provide a measure of crustal temperatures in the western United States. Such methods are based on the estimation of the depth to the bottom of magnetic sources, which is assumed to correspond to the temperature at which rocks lose their spontaneous magnetization. In this study, we test and apply a method based on the spectral analysis of magnetic anomalies. Early spectral analysis methods assumed that crustal magnetization is a completely uncorrelated function of position. Our method incorporates a more realistic representation where magnetization has a fractal distribution defined by three independent parameters: the depths to the top and bottom of magnetic sources and a fractal parameter related to the geology. The predictions of this model are compatible with radial power spectra obtained from aeromagnetic data in the western United States. Model parameters are mapped by estimating their value within a sliding window swept over the study area. The method works well on synthetic data sets when one of the three parameters is specified in advance. The application of this method to western United States magnetic compilations, assuming a constant fractal parameter, allowed us to detect robust long-wavelength variations in the depth to the bottom of magnetic sources. Depending on the geologic and geophysical context, these features may result from variations in depth to the Curie temperature isotherm, depth to the mantle, depth to the base of volcanic rocks, or geologic settings that affect the value of the fractal parameter. Depth to the bottom of magnetic sources shows several features correlated with prominent heat flow anomalies. It also shows some features absent in the map of heat flow. Independent geophysical and geologic data sets are examined to determine their origin, thereby providing new insights on the thermal and geologic crustal structure of the western United States.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

A teleseismic analysis of the New Brunswick earthquake of January 9, 1982

The analysis of the New Brunswick earthquake of January 9, 1982, has important implications for the evaluation of seismic hazards in eastern North America. Although moderate in size ( m b 5.7), it was well-recorded teleseismically. Source characteristics of this earthquake have been determined from analysis of data that were digitally recorded by the Global Digital Seismograph Network. From broadband displacement and velocity records of P waves, we have obtained a dynamic description of the rupture process as well as conventional static properties of the source. The depth of the hypocenter is estimated to be 9 km from depth phases. The focal mechanism determined from the broadband data corresponds to predominantly thrust faulting. From the variation in the waveforms the direction of slip is inferred to be updip on a west dipping NNE striking fault plane. The steep dip of the inferred fault plane suggests that the earthquake occurred on a preexisting fault that was at one time a normal fault. From an inversion of bodywave pulse durations, the estimated rupture length is 5.5 km. Average properties of the rupture process were examined by a moment tensor analysis of long-period P and SH body waves. The long-period moment of this earthquake was 5.3 × 10 24 dyne cm. The static and dynamic stress drops are 41 and 65 bars, respectively, similar to those of many earthquakes with similar moment in regions that are more seismically active. The joint epicenter determination algorithm was used to locate, relative to the mainshock, the three teleseismically recorded aftershocks that occurred through March 31, 1982. The relocated hypocenters of the aftershocks are significantly different from each other and from that of the mainshock; they provide additional support for the source dimensions inferred from the waveform analysis.

Journal of Geophysical Research Solid Earth↗

USGS2017

Changes in the Chemistry of Groundwater Reacted with CO 2 : Comparison of Laboratory Results with the ZERT Field Pilot

As part of the ZERT program, sediments from two wells at the ZERT site, located in Bozeman, Montana, USA were reacted with a solution having the composition of local groundwater. A total of 50 water samples were collected from 7 containers placed for 15 days in a glove box with one atmosphere of CO 2 to investigate detailed changes in the concentrations of major, minor and trace inorganic compounds, and to compare these with changes observed in groundwater at the ZERT site following CO 2 injection. Laboratory results included rapid changes in pH (8.6 to 5.7), alkalinity (243 to 1295 mg/L as HCO 3 ), electrical conductance (539 to 1822 μS/cm), Ca (28 to 297 mg/L), Mg (18 to 63 mg/L), Fe (5 to 43 μg/L) and Mn (2 to 837 μg/L) following CO 2 injection. These chemical changes, which are in general agreement with those obtained from sampling the ZERT monitoring wells, could provide early detection of CO 2 leakage into shallow groundwater. Dissolution of calcite, some dolomite and minor Mn-oxides, and desorption/ion exchange are likely the main geochemical processes responsible for the observed changes.

Procedia Earth and Planetary Science↗

USGS2010

Volcano monitoring using GPS: Developing data analysis strategies based on the June 2007 Kīlauea Volcano intrusion and eruption

The global positioning system (GPS) is one of the most common techniques, and the current state of the art, used to monitor volcano deformation. In addition to slow (several centimeters per year) displacement rates, GPS can be used to study eruptions and intrusions that result in much larger (tens of centimeters over hours-days) displacements. It is challenging to resolve precise positions using GPS at subdaily time intervals because of error sources such as multipath and atmospheric refraction. In this paper, the impact of errors due to multipath and atmospheric refraction at subdaily periods is examined using data from the GPS network on Kīlauea Volcano, Hawai'i. Methods for filtering position estimates to enhance precision are both simulated and tested on data collected during the June 2007 intrusion and eruption. Comparisons with tiltmeter records show that GPS instruments can precisely recover the timing of the activity.

Hawai'i↗

USGS2020

Generalized models to estimate carbon and nitrogen stocks of organic soil horizons in Interior Alaska

Boreal ecosystems comprise one tenth of the world’s land surface and contain over 20 % of the global soil carbon (C) stocks. Boreal soils are unique in that its mineral soil is covered by what can be quite thick layers of organic soil. These organic soil layers, or horizons, can differ in their state of decomposition, source vegetation, and disturbance history. These differences result in varying soil properties (bulk density, C concentration, and nitrogen (N) concentration) among soil horizons. Here we summarize these soil properties, as represented by over 3000 samples from Interior Alaska, and examine how soil drainage and stand age affect these attributes. The summary values presented here can be used to gap-fill large datasets when important soil properties were not measured, provide data to initialize process-based models, and validate model results. These data are available at https://doi.org/10.5066/P960N1F9 (Manies, 2019).

Alaska↗

USGS2018

The National Elevation Dataset

The National Elevation Dataset (NED) is a primary elevation data product that has been produced and distributed by the U.S. Geological Survey (USGS). Since its inception, the USGS has compiled and published topographic information in many forms, and the NED is a significant development in this long line of products that describe the land surface. The NED provides seamless raster elevation data of the conterminous United States (CONUS), Alaska, Hawaii, U.S. island territories, Mexico, and Canada. The NED is derived from diverse source datasets that are processed to a specification with consistent resolutions, coordinate system, elevation units, and horizontal and vertical datums. The NED was developed as the logical result of the maturation of the long-standing USGS elevation program, which for many years concentrated on production of quadrangle-based digital elevation models (DEM). The NED contributes to the elevation layer of The National Map, and it provides basic elevation information for earth science studies and mapping applications in the U.S. and most of North America. For over 15 years (1999–2014), the NED served as the flagship elevation product of the USGS. In 2015, the 3D Elevation Program (3DEP) was initiated. When the 3DEP initiative became operational, the name “National Elevation Dataset” (and the abbreviation “NED”) were retired as the USGS elevation activities and data were rebranded under the 3DEP banner. However, elevation data produced and distributed as part of the NED are still widely used (and distributed by other entities), so there is a continuing need for detailed documentation, including how it was produced, its accuracy, and how it is used. This chapter directly addresses that need for detailed information about the NED. The most recent detailed description of the NED appeared in the 2nd edition of the DEM Users Manual (2007), and because NED production continued through 2014, the details reported herein provide valuable information for data accessed by the user community from 2007 through 2014. The NED has been widely used in operational applications and research studies and is extensively cited in reports on those activities, so it is important for the user community to have access to information about the NED to better judge how its qualities and characteristics might affect results derived from its use as the elevation data source. Additionally, the NED seamless layers serve as one of the input data sources for the current 3DEP elevation production system, so, as with any input data source, an understanding of the data characteristics is critical.

Book chapter↗

USGS2004

Water-quality characteristics and trends for selected sites in or near the Earth Resources Observation Systems (EROS) Data Center, South Dakota, 1973-2000

This report presents data on water-quality samples that were collected in and near the Earth Resources Observation Systems (EROS) Data Center from 1973 through 2000. The investigation is a collaborated effort between the U.S. Geological Survey, Water Resources Discipline (WRD), and Geography (formerly National Mapping) Discipline, EROS Data Center. A water-quality monitoring program was initiated in 1973, when the EROS Data Center was constructed, and continues at the present time (2003). Under this program, water-quality samples were collected at various sites on the EROS Data Center's property and in the surrounding area. These sites include 4 wastewater-treatment lagoons, 1 site on EROS Lake located behind the EROS Data Center, 2 stream sites near the EROS Data Center, and 9 ground-water wells surrounding the EROS Data Center. Additionally, 3 sites on EROS Lake, 7 stream sites, and 9 ground-water sites are located within the study area and have been sampled during the period covered in the report. Some of these additional sites were part of the initial water-quality monitoring conducted during and immediately after the construction of the EROS Data Center. For other sites, some special sampling (depth-profile and bottom material) has occurred at times during the sampling history; however, these sites have little water-quality data and were not used for statistical or trend analysis. A trend-analysis program, Estimate TREND (ESTREND), was used to analyze for trends for one surface-water site, the Big Sioux River, which was the only site that had a substantial number of samples collected during an extensive period. The ESTREND trend-analysis program was used to analyze 16 constituents. Specific conductance and dissolved orthophosphate were the only constituents determined to have statistically significant trends. Results showed an increasing trend for specific conductance and a decreasing trend for dissolved orthophosphate. Scatter plots with regression smoothing lines for selected constituents are presented for selected surface-water and ground-water sites. Regression analyses using a Lowess (Locally Weighted Scatterplot Smoothing) smoothing line for Split Rock Creek, EROS Lake, the lagoon sites, and the ground-water sites indicated variable results, with some constituents indicating an increasing or decreasing trend, some having varied results, and others indicating no change during the sampling period.

South Dakota↗

USGS1976

Thermomagnetic analysis of meteorites, 3. C3 and C4 chondrites

Thermomagnetic analysis was made on samples of all known C3 and C4 chondrites in a controlled oxygen atmosphere. Considerable variation was noted in the occurrence of magnetic minerals, comparable to the variation observed earlier in the C2 chondrites. Magnetite was found as the only major magnetic phase in samples of only three C3 chondrites (2–4 wt.%) and the Karoonda C4 chondrite (7.7 wt.%). The magnetite content of these three C3 chondrites is only about one-third that observed in the C1 and C2 chondrites which were found to contain magnetite as the only magnetic phase. Five C3 chondrites were observed to undergo chemical change during heating, producing magnetite: this behavior is characteristic of troilite oxidation. Upper limits on initial magnetite content of about 1–9% were established for these meteorites. Samples of the remaining five C3 chondrites and the Coolidge C4 chondrite were found to contain both magnetite and metallic iron. In two samples, iron containing ≤2% Ni was observed, while in the other four, the iron contained 6–8 wt.% Ni. In addition to containing both magnetite and iron metal, three of these samples reacted during heating to form additional magnetite. Variations in the magnetic mineralogy and, hence by inference bulk mineralogy, of C3 and C4 chondrites indicate a more complex genesis than is evident from whole-rock elemental abundance patterns.

Earth and Planetary Science Letters↗

USGS2010

Lessons from (triggered) tremor

I test a “clock-advance” model that implies triggered tremor is ambient tremor that occurs at a sped-up rate as a result of loading from passing seismic waves. This proposed model predicts that triggering probability is proportional to the product of the ambient tremor rate and a function describing the efficacy of the triggering wave to initiate a tremor event. Using data mostly from Cascadia, I have compared qualitatively a suite of teleseismic waves that did and did not trigger tremor with ambient tremor rates. Many of the observations are consistent with the model if the efficacy of the triggering wave depends on wave amplitude. One triggered tremor observation clearly violates the clock-advance model. The model prediction that larger triggering waves result in larger triggered tremor signals also appears inconsistent with the measurements. I conclude that the tremor source process is a more complex system than that described by the clock-advance model predictions tested. Results of this and previous studies also demonstrate that (1) conditions suitable for tremor generation exist in many tectonic environments, but, within each, only occur at particular spots whose locations change with time; (2) any fluid flow must be restricted to less than a meter; (3) the degree to which delayed failure and secondary triggering occurs is likely insignificant; and 4) both shear and dilatational deformations may trigger tremor. Triggered and ambient tremor rates correlate more strongly with stress than stressing rate, suggesting tremor sources result from time-dependent weakening processes rather than simple Coulomb failure.

Cascadia↗

USGS1994

Acoustic mapping as an environmental management tool: I. detection of barrels of low-level radioactive waste, Gulf of the Farallones National Marine Sanctuary, California

The oceans have been and will continue to be disposal sites for a wide variety of waste products. Often these wastes are not dumped at the designated sites or transport occurs during or after dumping, and, subsequent attempts to monitor the effects the waste products have on the environment are inadequate because the actual location of the waste is not known. Acoustic mapping of the seafloor with sidescan sonar is a very effective technique for locating and monitoring dredge-spoil material and other debris. Sidescan sonar provides an acoustic image or sonograph of the sea floor that is similar to a satellite image of the Earth's land surface. In effect sidescan sonar allows the water column to be stripped from the sea floor, thereby providing a clear, unobstructed view of the sea bed. An example of the potential of this technique is summarized herein for the Gulf of the Farallones region. More than 47 800 drums (55 gallon) and other containers of low-level radioactive waste were dumped on the continental margin offshore the San Francisco Bay between 1946 and 1970. These drums now litter a large area (1200 km 2 ) of the sea floor within the Gulf of the Farallones National Marine Sanctuary (GFNMS). The exact location of the drums and the potential hazard the drums pose to the environment are unknown. To evaluate the risk, samples of the sediment, biota and water must be collected near and distant from the concentrations of barrels. To do this the exact location of the barrels must be known prior to sampling. The USGS, through a cooperative research agreement with GFNMS, used sidescan sonar to map two areas within the sanctuary. Total sea-floor coverage was obtained and computer-processed sonographic mosaics were constructed on board ship. Many small nongeologic targets were distributed throughout the survey areas that covered about 70 km 2 on the shelf and 120 km 2 on the slope. Analysis of the sidescan data suggests that the targets are 55-gallon drums. This interpretation was confirmed at one site with an underwater video and 35-mm camera system. Data were collected with both a 30-kHz and a 120-kHz sidescan system within a 15-km 2 area on the shelf. We found that the barrels were more easily detected with the mid-range 30-kHz system than with the higher resolution 120-kHz system. Maps of barrel distribution derived from the sonographs are being used to design sampling schemes to evaluate the risk that the radioactivity may have on the biota and environment.

California↗

USGS2014

Seismicity within a propagating ice shelf rift: the relationship between icequake locations and ice shelf structure

Iceberg calving is a dominant mass loss mechanism for Antarctic ice shelves, second only to basal melting. An important known process involved in calving is the initiation and propagation of through-penetrating fractures called rifts; however, the mechanisms controlling rift propagation remain poorly understood. To investigate the mechanics of ice-shelf rifting, we analyzed seismicity associated with a propagating rift tip on the Amery Ice Shelf, using data collected during the Austral summers of 2004-2007. We investigated seismicity associated with fracture propagation using a suite of passive seismological techniques including icequake locations, back projection, and moment tensor inversion. We confirm previous results that show that seismicity is characterized by periods of relative quiescence punctuated by swarms of intense seismicity of one to three hours. However, even during periods of quiescence, we find significant seismic deformation around the rift tip. Moment tensors, calculated for a subset of the largest icequakes (M W > -2.0) located near the rift tip, show steeply dipping fault planes, horizontal or shallowly plunging stress orientations, and often have a significant volumetric component. They also reveal that much of the observed seismicity is limited to the upper 50 m of the ice shelf. This suggests a complex system of deformation that involves the propagating rift, the region behind the rift tip, and a system of rift-transverse crevasses. Small-scale variations in the mechanical structure of the ice shelf, especially rift-transverse crevasses and accreted marine ice, play an important role in modulating the rate and location of seismicity associated with propagating ice shelf rifts.

Journal of Geophysical Research F: Earth Surface↗