USGS Science⌕ Search

SEARCH · USGS Science

Results for “Landslides”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources

Geologic map and map database of the Spreckels 7.5-minute Quadrangle, Monterey County, California

Introduction The Spreckels quadrangle lies at the north end of the Sierra de Salinas and extends from the Salinas Valley on the northeast across Los Laurelles Ridge south to Carmel Valley, an intermontane valley that separates the Santa Lucia Range from the Sierra de Salinas (fig. 1). The Toro Regional Park occupies the east-central part of the quadrangle, whereas the former Fort Ord Military Reservation covers the northwestern part of the area and is the probable locus of future development. Subdivisions largely occupy the older floodplain of Toro Creek and the adjacent foothills, with less dense development along the narrower canyons of Corral de Tierra and San Benancio Gulch to the south. The foothills southwest of the Salinas River are the site of active residential development. Geologically, the study area has a crystalline basement of Upper Cretaceous granitic rocks of the Salinian block and older metasedimentary rocks of the schist of the Sierra de Salinas of probable Cretaceous age. Resting nonconformably upon these basement rocks is a sedimentary section that ranges in age from middle Miocene to Holocene and has a composite thickness of as much as 1,200 m. One of the purposes of the present study was to investigate the apparent lateral variation of the middle to upper Miocene sections from the typical porcelaneous and diatomaceous Monterey Formation of the Monterey and Seaside quadrangles to the west (Clark and others, 1997) to a thick marine sandstone section in the eastern part of the Spreckels quadrangle. Liquefaction, which seriously affected the Spreckels area in the 1906 San Francisco earthquake (Lawson, 1908), and landsliding are the two major geological hazards of the area. The landslides consist mainly of older large slides in the southern and younger debris flows in the northern part of the quadrangle. This digital map database, compiled from previously published and unpublished data, and new mapping by the authors, represents the general distribution of bedrock and surficial deposits in the mapped area. Together with the accompanying text file (skmf.txt, skmf.pdf, or skmf.ps), it provides current information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:24,000 or smaller.

Miscellaneous Field Studies Map↗

Debris-flow and flooding hazards associated with the December 1999 storm in coastal Venezuela and strategies for mitigation

Heavy rainfall from the storm of December 14-16, 1999 triggered thousands of landslides on steep slopes of the Sierra de Avila north of Caracas, Venezuela. In addition to landslides, heavy rainfall caused flooding and massive debris flows that damaged coastal communities in the State of Vargas along the Caribbean Sea. Examination of the rainfall pattern obtained from the GOES-8 satellite showed that the pattern of damage was generally consistent with the area of heaviest rainfall. Field observations of the severely affected drainage basins and historical records indicate that previous flooding and massive debris-flow events of similar magnitude to that of December 1999 have occurred throughout this region. The volume of debris-flow deposits and the large boulders that the flows transported qualifies the 1999 event amongst the largest historical rainfall-induced debris flows documented worldwide.

Open-File Report↗

Volcano-hazard zonation for San Vicente volcano, El Salvador

San Vicente volcano, also known as Chichontepec, is one of many volcanoes along the volcanic arc in El Salvador. This composite volcano, located about 50 kilometers east of the capital city San Salvador, has a volume of about 130 cubic kilometers, rises to an altitude of about 2180 meters, and towers above major communities such as San Vicente, Tepetitan, Guadalupe, Zacatecoluca, and Tecoluca. In addition to the larger communities that surround the volcano, several smaller communities and coffee plantations are located on or around the flanks of the volcano, and major transportation routes are located near the lowermost southern and eastern flanks of the volcano. The population density and proximity around San Vicente volcano, as well as the proximity of major transportation routes, increase the risk that even small landslides or eruptions, likely to occur again, can have serious societal consequences. The eruptive history of San Vicente volcano is not well known, and there is no definitive record of historical eruptive activity. The last significant eruption occurred more than 1700 years ago, and perhaps long before permanent human habitation of the area. Nevertheless, this volcano has a very long history of repeated, and sometimes violent, eruptions, and at least once a large section of the volcano collapsed in a massive landslide. The oldest rocks associated with a volcanic center at San Vicente are more than 2 million years old. The volcano is composed of remnants of multiple eruptive centers that have migrated roughly eastward with time. Future eruptions of this volcano will pose substantial risk to surrounding communities.

Guadalupe;San Vicente;Tecoluca;Tepetitan;Zacatecol↗

Field-trip guide to the geology of the Lexington Reservoir and Loma Prieta areas in the Santa Cruz Mountains, Santa Clara and Santa Cruz Counties, California

This guide contains a road log and five stop descriptions for a field trip in the southern Santa Cruz Mountains. The trip officially begins at the boat dock parking area on Alma Bridge Road near the dam of Lexington Reservoir. Stop 1 involves a walk up the Limekiln Trail to examine a large landslide in serpentinite that frequently takes out the trail. Stop 2 is at Miller Point picnic area along the shore of the reservoir where exposures of massive, fractured graywacke sandstone are capped with terrace gravel deposits. Stop 3 is along Highland Way in the Santa Cruz Mountains where large landslides have occasionally force the closure of the road. Stop 4A-C are several closely spaced outcrop areas along Loma Prieta Avenue and Summit-Mt. Madonna Road in the Loma Prieta summit area. A walk to scenic vista points provide opportunity to discuss the evolution of regional landscape along the crest of the Sierra Azul. In addition, a variety of rock types are exposed in the Stop 4 area along a series of road cuts, including Cretaceous age conglomerate, turbidites (consisting of interbedded sandstone and shale), and fossiliferous mudstone. Stop 5 involves returning to the boat dock parking area to examine geology and the placement of the Lexington Dam in the Los Gatos Creek canyon.

California↗

Preliminary geologic map of the Santa Barbara coastal plain area, Santa Barbara County, California

This report presents a new geologic digital map of the Santa Barbara coastal plain area at a compilation scale of 1:24,000 (one inch on the map = 2,000 feet on the ground) and with a horizontal positional accuracy of at least 20 m. This preliminary map depicts the distribution of bedrock units and surficial deposits and associated deformation underlying and adjacent to the coastal plain within the contiguous Santa Barbara and Goleta 7.5' quadrangles. A planned second version will extend the mapping westward into the adjoining Dos Pueblos Canyon quadrangle and eastward into the Carpinteria quadrangle. The mapping presented here results from the collaborative efforts of geologists with the U.S. Geological Survey Southern California Areal Mapping Project (SCAMP) (Minor, Kellogg, Stanley, Stone, and Powell) and the tectonic geomorphology research group at the University of California at Santa Barbara (Gurrola and Selting). C.L. Powell, II, performed all new fossil identifications and interpretations reported herein. T.R. Brandt designed and edited the GIS database,performed GIS database integration and created the digital cartography for the map layout. The Santa Barbara coastal plain is located in the western Transverse Ranges physiographic province along a west-trending segment of the southern California coastline about 100 km (62 mi) northwest of Los Angeles. The coastal plain region, which extends from the Santa Ynez Mountains on the north to the Santa Barbara Channel on the south, is underlain by numerous active and potentially active folds and partly buried thrust faults of the Santa Barbara fold and fault belt. Strong earthquakes that occurred in the region in 1925 (6.8 magnitude) and 1978 (5.1 magnitude) are evidence that such structures pose a significant earthquake hazard to the approximately 200,000 people living within the major coastal population centers of Santa Barbara and Goleta. Also, young landslide deposits along the steep lower flank of the Santa Ynez Mountains indicate the potential for continued slope failures and mass movements that may threaten urbanized parts of the coastal plain. Deformed sedimentary rocks in the subsurface of the coastal plain and the adjacent Santa Barbara Channel contain deposits of oil and gas, some of which are currently being extracted. Shallow, localized sedimentary aquifers underlying the coastal plain provide limited amounts of water for the urban areas, but the quality of some of this groundwater is compromised by coastal salt-water contamination. The present map compilation provides a set of uniform geologic digital coverages that can be used for analysis and prediction of these and other geologic hazards and resources in the coastal plain region. In the map area the oldest stratigraphic units consist of resistant Eocene to Oligocene marine and terrestrial sedimentary rocks that form a mostly southward-dipping and laterally continuous sequence along the south flank of the Santa Ynez Mountains. Less resistant, but more variably deformed, Miocene, Pliocene, and Pleistocene marine sedimentary rocks and deposits are exposed in the lower Santa Ynez foothills and in the coastal hills and sea cliffs farther south. Pleistocene and Holocene surficial alluvial, colluvial, estuarine, and marine-terrace deposits directly underlie much of the low-lying coastal plain area, and similar-aged alluvial and landslide deposits locally mantle the lower flanks of the Santa Ynez Mountains. Structurally, the Santa Barbara coastal plain area is dominated by the Santa Barbara fold and fault belt, an east-west-trending zone of Quaternary, partly active folds and blind and exposed reverse and thrust faults. The dominant trend of individual structures within the belt is west-northwest -- slightly oblique to the overall trend of the fold and fault belt. A conspicuous exception, however, is the More Ranch fault system, which strikes east-northeast across the fold and f

Open-File Report↗

Digital data for volcano hazards in the Mount Jefferson Region, Oregon

Mount Jefferson has erupted repeatedly for hundreds of thousands of years, with its last eruptive episode during the last major glaciation which culminated about 15,000 years ago. Geologic evidence shows that Mount Jefferson is capable of large explosive eruptions. The largest such eruption occurred between 35,000 and 100,000 years ago. If Mount Jefferson erupts again, areas close to the eruptive vent will be severely affected, and even areas tens of kilometers (tens of miles) downstream along river valleys or hundreds of kilometers (hundreds of miles) downwind may be at risk. Numerous small volcanoes occupy the area between Mount Jefferson and Mount Hood to the north, and between Mount Jefferson and the Three Sisters region to the south. These small volcanoes tend not to pose the far-reaching hazards associated with Mount Jefferson, but are nonetheless locally important. A concern at Mount Jefferson, but not at the smaller volcanoes, is the possibility that small-to-moderate sized landslides could occur even during periods of no volcanic activity. Such landslides may transform as they move into lahars (watery flows of rock, mud, and debris) that can inundate areas far downstream. The geographic information system (GIS) volcano hazard data layer used to produce the Mount Jefferson volcano hazard map in USGS Open-File Report 99-24 (Walder and others, 1999) is included in this data set. Both proximal and distal hazard zones were delineated by scientists at the Cascades Volcano Observatory and depict various volcano hazard areas around the mountain.

Open-File Report↗

Mass Wasting Following the 2002 Missionary Ridge Fire near Durango, Colorado, a Field Trip Guidebook

This field trip guide focuses on mass wasting following the 2002 Missionary Ridge fire near Durango, Colorado. We prepared this guide to accompany a May 4, 2006, field trip during the second Roy J. Shlemon Specialty Conference, which was held in Durango, Colorado, May 3-5. The conference, entitled Mass Wasting in Disturbed Watersheds, was sponsored by the Association of Environmental & Engineering Geologists (AEG) and the AEG Foundation. The objective of this Shlemon Conference was to bring together practitioners and researchers to define the current state of practice and identify unresolved problems with regard to the prediction and mitigation of mass wasting in disturbed watersheds. The one-day field trip begins and ends in Durango. Many of the field trip stops are at debris-flow fans around the periphery of the burn area, but one stop examines landslide activity in the burn area that initiated during spring 2005 snowmelt within a dormant, deep-seated landslide, as well as an erosion/debris-flow mitigation effort in a drainage basin above Lemon Reservoir. Also provided are descriptions of the Missionary Ridge fire, the geologic and climatic setting of the field-trip area, and the general effects of wildfire on watersheds.

Open-File Report↗

Comments on potential geologic and seismic hazards affecting proposed liquefied natural gas site in Santa Monica Bay, California

In a letter to the U.S. Geological Survey (USGS) dated March 25, 2008, Representative Jane Harman (California 36th district) requested advice on geologic hazards that should be considered in the review of a proposed liquefied natural gas (LNG) facility off the California coast in Santa Monica Bay. In 2004, the USGS responded to a similar request from Representative Lois Capps, regarding two proposed LNG facilities offshore Ventura County, Calif., with a report summarizing potential geologic and seismic hazards (Ross and others, 2004). The proposed LNG Deepwater Port (DWP) facility includes single point moorings (SPMs) and 35 miles of underwater pipelines. The DWP submersible buoys, manifolds, and risers would be situated on the floor of the southern Santa Monica Basin, in 3,000 feet of water, about 23 miles offshore of the Palos Verdes Peninsula. Twin 24-inch diameter pipelines would extend northeastward from the buoys across the basin floor, up the basin slope and across the continental shelf, skirting north around the Santa Monica submarine canyon. Figure 1 provides locations of the project and geologic features. Acronyms are defined in table 1. This facility is being proposed in a region of known geologic hazards that arise from both the potential for strong earthquakes and geologic processes related to sediment transport and accumulation in the offshore environment. The probability of a damaging earthquake (considered here as magnitude 6.5 or greater) in the next 30 years within about 30 miles (50 km) of the proposed pipeline ranges from 16% at the pipeline's offshore end to 48% where it nears land (Petersen, 2008). Earthquakes of this magnitude are capable of producing strong shaking, surface fault offsets, liquefaction phenomena, landslides, underwater turbidity currents and debris flow avalanches, and tsunamis. As part of the DWP license application for the Woodside Natural Gas proposal in Santa Monica Bay (known as the OceanWay Secure Energy Project), Fugro West, Inc., had already prepared a document discussing geologic hazards in the area, titled 'Exhibit B Topic Report 6 - Geological Resources' (Fugro West, Inc., 2007); hereafter, this will be called the 'Geological Resources document'. The USGS agreed to evaluate the information in the Geological Resources document regarding (1) proximity of active faults to the proposed project, (2) potential magnitude of seismic events from nearby faults, (3) thoroughness of the assessment of earthquake hazards in general, (4) potential hazards from ground rupture and strong shaking, (5) potential hazards from tsunamis, and (6) other geologic hazards including landslides and debris flows. Because two new earthquake probability reports were scheduled to be released in mid-April, 2008, by the USGS and the California Geological Survey (CGS), the USGS suggested a 6-month review period to enable a thorough incorporation of this new information. Twenty-seven scientists from the USGS and the CGS reviewed various sections of the Geological Resources document. This report outlines our major conclusions. The appendix is a longer list of comments by these reviewers, grouped by section of the Geological Resources document. Before discussing our reviews, we first provide a brief overview of geologic hazards in the proposed site area. This report is a snapshot in time and any future work in the area will need to take into account ongoing research efforts. For example, USGS scientists collected seismic reflection data in the spring of 2008 to study the structure and seismic potential of several faults in the area. Their interpretations (Conrad and others, 2008a and 2008b) are too preliminary to be included in this report, but their final results, along with other researchers' studies in the project area, should be considered in any future work on the Deepwater Port project.

California↗

The potential influence of changing climate on the persistence of salmonids of the inland west

The Earth's climate warmed steadily during the 20th century, and mean annual air temperatures are estimated to have increased by 0.6°C (Intergovernmental Panel on Climate Change, 2007). Although many cycles of warming and cooling have occurred in the past, the most recent warming period is unique in its rate and magnitude of change (Siegenthaler and others, 2005) and in its association with anthropogenic emissions of greenhouse gases (Intergovernmental Panel on Climate Change , 2007). The climate in the western United States warmed in concert with the global trend but at an accelerated rate (+0.8°C during the 20th century; Saunders and others, 2008). The region could also prove especially sensitive to future changes because the relatively small human population is growing rapidly, as are demands on limited water supplies. Regional hydrological patterns are dominated by seasonal snow accumulation at upper elevations. Most of the region is relatively dry, and both terrestrial and aquatic ecosystems are strongly constrained b y water availability (Barnett and others, 2008; Brown and others, 2008). Stream environments are dynamic and climatically extreme, and salmonid fishes are the dominant elements of the native biodiversity (McPhail and Lindsey, 1986; Waples and others, 2008). Salmonids have broad economic and ecologic importance, but a century of intensive water resource development, nonnative fish stocking, and land use has significantly reduced many populations and several taxa are now protected under the Endangered Species Act (Thurow and others, 1997; Trotter, 2008). Because salmonids require relatively pristine, cold water environments and are often isolated in headwater habitats, members of this group may be especially vulnerable to the effects of a warming climate (Keleher and Rahel, 1996; Rieman and others, 2007; Williams and others, 2009). Warming during the 20th century drove a series of environmental trends that have profound implications for many aspects of salmonid habitat, including disturbance regimes such as wildfire, and unfavorable changes to thermal and hydrologic properties of aquatic systems. Warmer air temperatures have been associated with decreased winter snow accumulations, have accelerated snowmelt, and have advanced the timing of peak runoff by several days to weeks across most of western North America (Stewart and others, 2005; Barnett and others, 2008). Less snow and earlier runoff decrease aquifer recharge, make less water available for groundwater inputs to streams, and are contributing to widespread decreases in summer low flows (Stewart and others, 2005; Rood and others, 2008; Luce and Holden 2009). Interannual variability in stream flow is increasing, as is the persistence of multi-year extreme conditions (McCabe and others, 2004; Pagano and Garen 2005). In many areas of western North America, flood risks have increased in association with warmer temperatures during the 20th century (Hamlet and Lettenmaier, 2005). Streams where midwinter temperatures are near freezing have proven especially sensitive to increased flooding because of associated transitional hydrological patterns (mixtures of rainfall and snowmelt) and propensity for occasional rain-on-snow events to rapidly melt winter snowpack and generate large floods (Hamlet and Lettenmaier, 2005). Stream temperatures in many areas are increasing (Peterson and Kitchell, 2001; Morrison and others, 2002; Bartholow, 2005; Kaushal and others, 2010), due to both air temperature increases and reduced summer flows that make streams more sensitive to warmer air temperatures (Isaak and others, 2010). In recent decades, wildfires have become more common across much of the western United States during periods of more frequent droughts (Westerling and others, 2006; Hoerling and Eischeid, 2007), and local stream temperature can increase in postfire environments (Gresswell, 1999; Dunham and others, 2007). Fire-related temperature increase within streams is commonly a transient phenomenon, lasting only until riparian vegetation has recovered (Gresswell, 1999); however, ongoing climate change could preclude recovery to higher stature, prefire vegetation types in some areas (McKenzie and others, 2004; van Mantgem and Stephenson, 2007), resulting in a loss of critical riparian shading. Additionally, when wildfires occur in steep mountain topographies, the vegetation that stabilize s soils on hillslopes is often killed and landslides become more prevalent (Gresswell, 1999). Landslides int o stream channels form debris flows composed of sediment slurries and dead trees that can scour channels to bedrock and further exacerbate stream heating, delay recovery of riparian areas, or extirpate fish populations (Gresswell, 1999; May and Gresswell, 2003; Dunham and others, 2007). Changes in stream environments will shift habitat distributions, sometimes unpredictably, in both time and space for many salmonid fishes. Water temperature fundamentally influences aquatic ecosystem health because distribution, reproduction, fitness, and survival of ectothermic organisms are inextricably linked to the thermal regime of the environment. Historically, research has focused on defining lethal thermal limits of salmonids (Eaton and others, 1995; Selong and others, 2001; Todd and others, 2008); however, water temperature is known to be important in biological processes at a variety of spatial scales and levels of biological organization (Rahel and Olden, 2008; McCullough and others, 2009). For instance, trout are affected directly by water temperature through feeding, metabolism, and growth rates, and indirectly by factors such as prey availability and species interactions (Wehrly and others, 2007; Rahel and Olden, 2008). Where cold water temperatures currently limit habitat suitability and distributions of some species (for example, at the highest and most northerly distributional extents; Nakano and others, 1996; Coleman and Fausch, 2007), a warming climate may gradually increase the quality and extent of suitable habitat. Over time, previously constrained populations are expected to expand into these new habitats and increase in number. Some evidence suggests this may already be happening in Alaska, where streams in recently deglaciated areas are being colonized by emigrants from nearby salmon and char populations (Milner and others, 2000). Unfortunately, many of the sensitive salmonid species that are often the focus of western managers are unlikely to benefit from future water temperature increases. Warmer stream temperatures will facilitate invasion by nonnative species that are broadly established in downstream areas into upstream areas where they will compete with native species (Rieman and others, 2006; Rahel and Olden, 2008; Fausch and others, 2009). In other cases, warmer stream temperatures will render thermally suitable habitats unsuitable in downstream areas and effect net losses of habitat because upstream distributions are often constrained by streams that are too small or steep (Hari and others, 2006; Isaak and others, 2010). Both scenarios are realistic for fish species like bull trout ( Salvelinus confluentus ) (Rieman and others, 2006; Rieman and others, 2007), the various subspecies of cutthroat trout ( Oncorhynchus clarkii ) (Williams and others, 2009), Gila trout ( Oncorhynchus gilae gilae ) (Kennedy and others, 2008), and Apache trout ( Oncorhynchus gilae apache ) (Rinne and Minckley, 1985; Carmichael and others, 1993). As native species are increasingly confined to smaller and more isolated habitats by a gradually warming climate, the effects of wildfires (whether related to lethal changes in water quality during a fire, channel debris flows, or chronic postfire warming ) could have greater proportional effects on remaining habitats (for example, Brown and others, 2001; Rieman and others, 2007). If these changes were accompanied by additional hydrologic alterations associated with changes to the magnitude, frequency, duration, timing, and rate of change of discharge patterns (Jager and others, 1999; Henderson and others, 2000), populations may begin to lose some of their historic resilience and become ever more susceptible to local extirpations. As dramatic and extensive as climatic and environmental trends are for salmonid habitats, global climate models (GCMs) project that many of these trends will continue and even accelerate until at least the middle of the 21st century (Intergovernmental Panel on Climate Change, 2007). Current projections suggest mean annual air temperatures will increase by an additional 1–3°C, and early indications are that climate trajectory is at the higher end of this range (Pittock, 2006; Raupach and others, 2007). Although predicted changes vary considerably, even the most conservative estimates suggest a warming rate that will be twice that observed during the 20th century. Projections for the midcentury are most certainly due to the effects of greenhouse gases already emitted or predicted in the short term, uncertainties of the effects of longer-term greenhouse gas emissions, short-term climate cycles, and process errors associated with climate models (Cox and Stephenson, 2007). Projections of changes in total precipitation are less certain than those for air temperatures, but most GCMs project relatively small changes in the Northwest, with the exception of slightly drier summer periods (Mote and others, 2008; Karl and others, 2009). In the Southwest, however, significant decreases (such as 15–30 percent ) are projected during most periods of the year, and this area is one of the few for which Intergovernmental Panel on Climate Change (2007) precipitation projections have a high level of certainty (Hoerling and Eischeid, 2007; Karl and others, 2009). Clearly, managers of native salmonids in the wester n United States should consider adjusting management strategies to accommodate a warmer and possibly drier future (Williams and others, 2009). Tools are needed to forecast where important changes may occur and how conservation efforts should be prioritized. In this Open-File Report, we document our initial efforts in this regard for 10 species and subspecies of inland trout and Montana Arctic grayling ( Thymallus arcticus ) across the western United States.

Arizona, California, Colorado, Idaho, Montana, Nev↗

1964 Great Alaska Earthquake: a photographic tour of Anchorage, Alaska

On March 27, 1964, at 5:36 p.m., a magnitude 9.2 earthquake, the largest recorded earthquake in U.S. history, struck southcentral Alaska (fig. 1). The Great Alaska Earthquake (also known as the Good Friday Earthquake) occurred at a pivotal time in the history of earth science, and helped lead to the acceptance of plate tectonic theory (Cox, 1973; Brocher and others, 2014). All large subduction zone earthquakes are understood through insights learned from the 1964 event, and observations and interpretations of the earthquake have influenced the design of infrastructure and seismic monitoring systems now in place. The earthquake caused extensive damage across the State, and triggered local tsunamis that devastated the Alaskan towns of Whittier, Valdez, and Seward. In Anchorage, the main cause of damage was ground shaking, which lasted approximately 4.5 minutes. Many buildings could not withstand this motion and were damaged or collapsed even though their foundations remained intact. More significantly, ground shaking triggered a number of landslides along coastal and drainage valley bluffs underlain by the Bootlegger Cove Formation, a composite of facies containing variably mixed gravel, sand, silt, and clay which were deposited over much of upper Cook Inlet during the Late Pleistocene (Ulery and others, 1983). Cyclic (or strain) softening of the more sensitive clay facies caused overlying blocks of soil to slide sideways along surfaces dipping by only a few degrees. This guide is the document version of an interactive web map that was created as part of the commemoration events for the 50th anniversary of the 1964 Great Alaska Earthquake. It is accessible at the U.S. Geological Survey (USGS) Alaska Science Center website: http://alaska.usgs.gov/announcements/news/1964Earthquake/ . The website features a map display with suggested tour stops in Anchorage, historical photographs taken shortly after the earthquake, repeat photography of selected sites, scanned documents, and small-scale maps, as well as links to slideshows of additional photographs and Google Street View™ scenes. Buildings in Anchorage that were severely damaged, sites of major landslides, and locations of post-earthquake engineering responses are highlighted. The web map can be used online as a virtual tour or in a physical self-guided tour using a web-enabled Global Positioning System (GPS) device. This publication serves the purpose of committing most of the content of the web map to a single distributable document. As such, some of the content differs from the online version.

Alaska↗

USGS approach to real-time estimation of earthquake-triggered ground failure - Results of 2015 workshop

The U.S. Geological Survey (USGS) Earthquake Hazards and Landslide Hazards Programs are developing plans to add quantitative hazard assessments of earthquake-triggered landsliding and liquefaction to existing real-time earthquake products (ShakeMap, ShakeCast, PAGER) using open and readily available methodologies and products. To date, prototype global statistical models have been developed and are being refined, improved, and tested. These models are a good foundation, but much work remains to achieve robust and defensible models that meet the needs of end users. In order to establish an implementation plan and identify research priorities, the USGS convened a workshop in Golden, Colorado, in October 2015. This document summarizes current (as of early 2016) capabilities, research and operational priorities, and plans for further studies that were established at this workshop. Specific priorities established during the meeting include (1) developing a suite of alternative models; (2) making use of higher resolution and higher quality data where possible; (3) incorporating newer global and regional datasets and inventories; (4) reducing barriers to accessing inventory datasets; (5) developing methods for using inconsistent or incomplete datasets in aggregate; (6) developing standardized model testing and evaluation methods; (7) improving ShakeMap shaking estimates, particularly as relevant to ground failure, such as including topographic amplification and accounting for spatial variability; and (8) developing vulnerability functions for loss estimates.

Open-File Report↗

Modeled inundation limits of potential lahars from Mount Adams in the White Salmon River Valley, Washington

Lahars large enough to reach populated areas are a hazard at Mount Adams, a massive volcano in the southern Cascade Range of Washington State (fig. 1). It is considered to be still active and has the potential to erupt again. By definition, lahars are gravity-driven flows of water-saturated mixtures of mud and rock (plus or minus ice, wood, and other debris), which originate from volcanoes and have a variety of potential triggering mechanisms (Vallance, 2000; Vallance and Iverson, 2015). Flowing mixtures can range in fluid consistency from something like a milkshake to something more like wet concrete, and they behave like flash floods, in that they can appear suddenly in river channels with little warning and commonly have boulder- or log-choked flow fronts. Lahars are hazardous because they can flow rapidly in confined valleys (commonly 20–35 miles per hour [mph] or 9–16 meters per second [m/s]), can travel more than 100 miles (mi) (161 kilometers [km]) from a source volcano, and can move with incredible destructive force, carrying multi-ton boulders and logs that can act as battering rams (Pierson, 1998). The biggest threats from lahars to downstream communities are present during eruptive activity, and impacts to communities can be dire. For example, a very large eruption-triggered lahar in Colombia in 1985 surprised and killed more than 20,000 people in a large town located about 45 mi (72 km) downstream and out of sight of the volcano that produced it (Pierson and others, 1990). Mount Adams, one of the largest volcanoes in the Cascade Range, is a composite stratocone composed primarily of andesite lava flows. It has been the most continuously active volcano within the 480-mi 2 Mount Adams volcanic field—a region covering parts of Klickitat, Skamania, Yakima, andLewis Counties and part of the Yakama Nation Reservation in Washington State (Hildreth and Fierstein,1995, 1997). About 500,000 years in age, Mount Adams reached its present size by about 15,000 years ago, primarily through the episodic effusion of lava flows; it has not had a history of major explosive eruptions like Mount St. Helens, its neighbor to the west. Timing of the most recent eruptive activity (recorded by four thin tephra layers) is on the order of 1,000 years ago; the tephras are bracketed by 2,500-year-old and 500-year-old ash layers from Mount St. Helens (Hildreth and Fierstein, 1995, 1997). Mount Adams currently shows no signs of renewed unrest. Eruptive history does not tell us everything we need to know about hazards at Mount Adams, however, which are fully addressed in the volcano hazard assessment for Mount Adams (W.E. Scott and others, 1995). This volcano has had a long-active hydrothermal system that circulated acidic hydrothermal fluids, formed by the solution of volcanic gases in heated groundwater, through fractures and permeable zones into upper parts of the volcanic cone. Acid sulfate leaching of rocks in the summit area may still be occurring, but chemical and thermal evidence suggests that the main hydrothermal system is no longer active at Mount Adams (Nathenson and Mariner, 2013). However, these rock-weakening chemical reactions have operated long enough to change about 0.4 cubic miles (mi 3 ) (1.7 cubic kilometers [km 3 ]) of the hard lava rock in the volcano’s upper cone to a much weaker clay-rich rock, thus significantly reducing rock strength and thereby slope stability in parts of the cone (Finn and others, 2007). The two largest previous lahars from Mount Adams were triggered by landslides of hydrothermally altered rock from the upper southwestern flank of the cone, and any future large lahars are likely to be triggered by the same mechanism. Mount Rainier also has had extensive hydrothermal alteration of rock in its upper edifice, and it also has a history of large landslides that transform into lahars (K.M. Scott and others, 1995; Vallance and Scott, 1997; Reid and others, 2001). The spatial depiction of modeled lahar inundation zones accompanying this report, shown in two different map perspectives, is intended to augment (not replace) the existing hazard maps for Mount Adams (W.E. Scott and others, 1995; Vallance, 1999). The maps in this report show potential areas of inundation by lahars of different initial volumes, which are determined by a computer model, LAHARZ (Iverson and others, 1998; Schilling, 1998). One map sheet presents LAHARZ-determined inundation areas on a normal plan-view shaded-relief map of the study area; the other gives an oblique perspective of the landscape with raised topography, as if one were viewing the landscape at an angle from an aircraft (Jenny and Patterson, 2007). LAHARZ was developed after the original hazard maps (based only on mapping of geologic deposits) were made. Predicted inundation zones on these maps provide an alternative approach to estimation of areas that could be inundated as lahars of different volumes pass through the valley. However, there is considerable uncertainty in the exact location of the hazard-zone boundaries shown on these maps, as well as on earlier maps.

Washington↗

Geologic reconnaissance in western Liberia

Irazu volcano, a large composite cone, consists of interbedded lava flows, lahars, and ash beds. This rock sequence, named the Irazu Group, has been divided into four formations; from the base: Reventado Formation, Sapper Formation, Birris Formation, and Cervantes Formation. Only the Reventado and Sapper Formations crop out in the Reventado watershed. The Reventado Formation consists of at least four widespread medium-gray finely porphyritic lava flows and interbedded lahar and some ash. Where not excessively jointed, lava flows within the formation are structurally sound and generally fresh. The Sapper Formation also consists of interbedded lava, lahar, and ash; lavas are black dense and coarsely porphyritic and in the middle part of the watershed are structurally sound if not excessively jointed. In the upper part of the watershed Sapper lavas are deeply altered, pyritic and structurally unsound. At least three major inactive and six major active landslides have been recognized In the Reventado watershed, all apparently in the Sapper Formation. Mudflows in the Reventado watershed have been supplied with debris from the caving of oversteepened stream banks and to a lesser extent from the active landslides.

Open-File Report↗

Geology of the Reventado River Watershed, Costa Rica, Part A, General geology

Irazu volcano, a large composite cone, consists of interbedded lava flows, lahars, and ash beds. This rock sequence, named the Irazil Group, has been divided into four formations; from the base: Reventado Formation, Sapper Formation, Birris Formation, and Cervantes Formation. Only the Reventado and Sapper Formations crop out in the Reventado watershed. The Reventado Formation consists of at least four widespread medium-gray finely prophyritic lava flows and interbedded lahar and some ash. Where not excessively jointed, lava flows within the formation are structurally sound and generally fresh. The Sapper Formation also consists of interbedded lava, lahar, and ash; lavas are black dense and coarsely porphyritic and in the middle part of the watershed are structurally sound if not excessively jointed. In the upper part of the watershed Sapper lavas are deeply altered, pyritic and structurally unsound. At least three major inactive and six major active landslides have been recognized in the Reventado watershed, all apparently in the Sapper Formation. Mudflows in the Reventado watershed have been supplied with debris from the caving of oversteepened stream banks and to a lesser extent from the active landslides.

Open-File Report↗

Reconnaissance engineering geology of the Ketchikan area, Alaska, with emphasis on evaluation of earthquake and other geologic hazards

The Alaska earthquake of March 27, 1964, dramatically emphasized the need for engineering geologic studies of urban areas in seismically active regions. A reconnaissance study of the Ketchikan area in southeastern Alaska is part of a program to evaluate earthquake and other geologic hazards in most of the larger Alaska coastal communities. These evaluations in the Ketchikan area should provide broad guidelines useful in city and land-use planning. Ketchikan, which had a population of approximately 7,000 in 1970, is built on the southwestern end of Revillagigedo Island along the northeastern coastline of Tongass Narrows. Altitudes reach 1,000 feet (305 m) within half a mile (0.8 km) of the coast and near-vertical cliffs characterize the terrain in places. The climate is predominantly marine. Average precipitation is approximately 152 inches (386 cm). The Ketchikan area was covered by glacier ice at least once and probably several times during the Pleistocene Epoch. The present topography, characterized by elongate lakes, U-shaped valleys, fiords, inlets, and passages, clearly reflects the effects of glaciation. The presence of emergent marine deposits, at least 300 feet (91 m) above sea level, shows that the land has been uplifted relative to sea level since the last deglaciation of the region. Bedrock is exposed or is near the surface throughout most of the mapped area. The bedrock consists chiefly of metamorphic rocks. In a few places these rocks have been intruded by igneous rocks. Exposed metamorphic rocks are mostly thinly foliated schists and phyllites, metamorphosed to greenschist facies. Foliation generally strikes northwest with moderate to steep dips to the northeast. Most of the rock is fairly competent and near-vertical cuts tend to be stable. The more indurated metamorphic rock can be used for riprap, but more durable blocks generally can be obtained from the igneous rock. The surficial deposits have been divided into the following map units on the basis of their time of deposition, mode of origin, and grain size: (1) undifferentiated drift (Qd), (2) elevated marine deposits (Qm), (3) stream alluvium (Qa), (4) fan-delta deposits (Qf), and (5) modern beach deposits (Qb). Manmade fill (f) also is mapped as a separate unit. Muskeg, colluvium, and offshore deposits are not included as map units but are discussed in the report under the heading "Surficial deposits (not shown on map)." The undifferentiated drift deposits consist mostly of till or other diamictons, generally less than 25 feet (7.6 m) thick. Exposed elevated marine deposits (Qm) generally consist of sand and gravel less than 5 feet (1.5 m) thick. Stream alluvium (Qa) is chiefly sand, gravel, cobbles, and boulders probably everywhere less than 15 feet (4.6 m) thick. Fan-delta deposits (Qf) consist mostly of loose sand, gravel, and boulders as much as 50 feet (15 m) thick. Modern beach deposits (Qb) are mostly loose sand and gravel generally less than 10 feet (3 m) thick. Two basically different types of manmade fill are present: (1) large fills along the waterfront, commonly 5 to 15 feet (1.5-4.6 m) thick, consisting of silt, sand, gravel, rock, and diverse other materials, and (2) fills, generally less than 10 feet (3 m) thick and consisting of sand, gravel, or crushed rock, placed inland from the waterfront and used as pads for buildings and parking areas. Fairly thick deposits of muskeg may be present in the southeastern part of the mapped area but have not been examined in the field. Colluvial deposits, locally 5 to 8 feet (1.5-2.4 m) thick, consist mostly of decomposing bedrock fragments. Offshore deposits are poorly known; near-shore loose sand and gravel rest on a sloping bedrock surface. Southeastern Alaska lies within the circum-Pacific seismic belt that rims the northern Pacific Basin and has been tectonically active since at least early Paleozoic time. Large-scale faulting has been common. The two most prominent fault systems in southeastern Alaska and surrounding regions are (1) the Denali fault system, and (2) the Fairweather-Queen Charlotte Islands fault system. Of the two, the Fairweather-Queen Charlotte Islands fault system is the more active and of most significance in relation to the Ketchikan area. Ketchikan lies within the northwest trend of the Gravina-Nutzotin belt of fault thrusting. The trends of at least some of the linear fiords near the mapped area are controlled by faults. However, it is not known whether a major fault extends up Tongass Narrows offshore from Ketchikan. Between 1899 and 1970, five earthquakes having magnitudes of 8 or greater occurred in or near southeastern Alaska or in adjacent offshore areas; three have occurred having magnitudes of between 7 and 8, at least eight with magnitudes of between 6 and 7, 15 with magnitudes of between 5 and 6, and about 140 have been recorded with magnitudes of less than 5 or of unassigned magnitudes. All of the earthquakes with magnitudes greater than 8, and a large proportion of the others, appear to be related to the Fair-weather-Queen Charlotte Islands fault system or to the connecting Chugach-St. Elias fault to the northwest. Within a 50-mile (80-km) radius of Ketchikan, epicenters of three earthquakes with magnitudes of 5 or less have been recorded. Within a radius of 100 miles (160 km), 10 epicenters have been recorded, two with magnitudes between 6 and 7 and eight with magnitudes of 5 or less. Although no instrumentally recorded earthquakes had epicenters in the mapped area, at least 32 earthquakes that had epicenters elsewhere were felt or possibly felt in Ketchikan. Most of these earthquakes probably had epicenters along the Queen Charlotte Islands fault. Ketchikan is tentatively assigned by me to seismic zone 2. This is a zone in which magnitudes of the largest expectable earthquake would range from 4.5 to 6.0 and where moderate damage could be expected. Large earthquakes of magnitude 8 or greater, however, can be expected to occur from time to time along the Queen Charlotte Islands fault. Ground motion from these earthquakes, although attenuated with distance, may still be sufficiently strong at Ketchikan to cause substantial damage. Possible future earthquake effects include: (1) land-level changes caused by local faulting or by large-scale regional deformation, (2) ground shaking, (3) compaction, (4) liquefaction, (5) subaerial and submarine sliding, (6) water-sediment ejection and ground fracturing, (7) reaction of sensitive and quick clays, and (8) effects of tsunamis, seiches, and other abnormal water waves. Although land-level changes due to local faulting are unlikely, large-scale regional deformation may cause uplift or subsidence in Ketchikan. Adverse effects would be confined mainly to the waterfront area. This area also would be most heavily damaged if Ketchikan were strongly shaken by an earthquake. Nonengineered, loose, manmade fills and fan-delta deposits in this area probably would be subject to the strongest shaking. These deposits probably also are most subject to compaction, liquefaction, sliding, and water-sediment ejection. Earthquake effects expectably would be considerably fewer and less severe for the part of Ketchikan upslope from the harbor area because bedrock is at or near the surface in large parts of the area. No sensitive clays have been identified but, if present, they probably are confined to the till and other diamicton deposits in the northeastern part of the mapped area. Tsunami waves are not expected to have a local generation source. Those arriving from a distant source, although potentially highly destructive, probably would be greatly attenuated before arriving at Ketchikan. Seiche waves may develop on lakes near the mapped area and possibly cause failure of earth-fill dams. Destructive waves generated by earthquake-induced local submarine sliding appear to be unlikely in the Ketchikan area. Geologic hazards in the area that are not caused by earthquakes are believed to be relatively minor. They include: (1) landsliding and subaqueous sliding, and (2) flooding. Only minor landsliding has occurred in the mapped area, but the potential for sliding may increase as the city expands and heavily timbered areas are cleared, with attendant accelerated erosion and mass wasting. The greatest potential for subaqueous sliding is along the shoreline, where fairly thick fan-delta deposits rest on a sloping bedrock surface. Periodic flooding has occurred on some creeks in the mapped area and can be expected to occur from time to time in the future. In order that more accurate evaluations of geologic hazards can be made in the future, several recommendations are made for additional studies.

Alaska↗

Geology of the Monterey Bay region

Geophysical data and sea floor samples collected from the continental shelf and slope between Ano Nuevo Point and Point Sur, California indicate that the Monterey Bay region has had a complex late Cenozoic tectonic history. Uplift and depression have produced a succession of regressive and transgressive sedimentary units, while contemporaneous right-slip along faults of the San Andreas system have offset major structural and lithologic elements. This deformation produced three regional and several local unconformities within upper Tertiary rocks and initiated development of a canyon system that today includes the Monterey, Ascension, Carmel, and other large submarine canyons. The Tertiary stratigraphy of the offshore Monterey Bay area is divided into two provinces by a major structural boundary, the north-trending Palo Colorado-San Gregorio fault zone. East of this zone in the offshore are four seismically distinct sequences that can be correlated with major sequences onshore. These sequences comprise (1) pre-Tertiary basement, and (2) middle Miocene, (3) upper Miocene to Pliocene, and (4) upper Pliocene to Holocene sedimentary intervals. Each of the latter three sequences is bounded by unconformities, as is its counterpart on land. Only Neogene sedimentary rocks are present offshore; Paleogene units, if originally present, have been removed completely by pre-middle Miocene erosion. An extensive erosional surface was cut during Zemorrian time into the late Mesozoic granitic basement rocks. Incised into this surface are the ancestral Monterey Canyon and an unnamed canyon. Marine sedimentary rocks of upper Miocene and Pliocene age overlie this unconformably and fill the unnamed canyon. Similar rocks also may have once filled Monterey Canyon. Near shore these strata are covered by terrestrial alluvial and eolian deposits, deltaic deposits, marine canyon fill, landslide and slump deposits, and unconsolidated sediments that range in age from upper Pliocene to Holocene. Monterey Canyon appears to have been filled and exhumed at least twice since its inception in Oligocene time, once in late Miocene and once in Pleistocene time. Three major seismic stratigraphic units are apparent in continuous seismic reflection profiles from the offshore area west of the Palo Colorado-San Gregorio fault zone. These are (1) acoustical basement, and (2) middle Tertiary and (3) late Tertiary to Quaternary sedimentary intervals. Acoustical basement comprises Cretaceous to early Tertiary sedimentary rocks, Mesozoic or older metamorphic rocks, and Cretaceous or Jurassic rocks of the Franciscan assemblage. The middle Tertiary sequence consists of sedimentary rocks of questionable Miocene age. The late Tertiary to Quaternary sequence is composed of Pliocene sedimentary rocks and unconsolidated marine sediments, and submarine landslide and slump deposits. Seismic reflection surveys indicate two major, intersecting, northwest-trending fault zones to be present in the offshore Monterey Bay area. The Palo Colorado-San Gregorio fault zone may be more than 200 km long; it is narrow (approximately 3 km wide) and is represented in most places by one or two faults. This zone appears to connect with faults mapped on land near Ano Nuevo Point and Point Sur. The Monterey Bay fault zone, located in the area between Santa Cruz and Monterey, is a diffuse zone, approximately 10 to 15 km wide, of en echelon faults. Faults within this zone appear to connect with faults on land near Monterey, and the zone appears to be truncated by the Palo Colorado-San Gregorio fault zone west of Santa Cruz. Locations of more than 110 earthquakes (1968-1976) show that the newly mapped fault zones in Monterey Bay are seismically active. Epicenters in the bay form two clusters, one at the intersection of the Monterey Bay and Palo Colorado-San Gregorio fault zones, and the other in a linear belt that trends northwest along the Palo Colorado-San Gregorio fault zone. Faults within th

California↗

The 1980 Polallie Creek debris flow and subsequent dam-break flood, East Fork Hood River basin, Oregon

At approximately 9 p.m. on December 25, 1980, intense rainfall and extremely wet antecedent conditions combined to trigger a landslide of approximately 5,000 cubic yards at the head of Polallie Creek Canyon on the northeast flank of Mount Hood. The landslide was transformed rapidly into a debris flow, which surged down the channel at velocities between about 40 and 50 ft/s, eroding and incorporating large volumes of channel fill and uprooted vegetation. When it reached the debris fan at the confluence with the East Fork Hood River, the debris flow deposited approximately 100,000 cubic yards of saturated, poorly sorted debris to a maximum thickness of 35 ft, forming a 750-ft-long temporary dam across the channel. Within approximately 12 minutes, a lake of 85 acre-feet formed behind the blockage, breached the dam, and sent a flood wave down the East Fork Hood River. The combined debris flow and flood resulted in one fatality and over $13 million in damage to a highway, bridges, parks, and a water-supply pipeline. Application of simple momentum- and energy-balance equations, and uniform flow equations resulted in debris flow peak discharges ranging from 50,000 ft3/s to 300,000 ft3/s at different locations in the Polallie Creek Canyon. This wide range is attributed to temporary damming at the boulder- and log-rich flow front in narrow, curving reaches of the channel. When the volume of the solid debris was subtracted out, assuming a minimum peak debris-flow discharge of 100,000 ft3/s at the canyon mouth, a minimum peak-water discharge of 40,000 ft3/s was obtained. A computer dam-break model simulated peak flow for the outbreak flood on the East Fork Hood River in the range of 20,000 to 30,000 ft3/s using various breach shapes and durations of breach between 5 and 15 minutes. A slope conveyance computation 0.25 mi downstream from the dam gave a peak water discharge (solids subtracted out) for the debris-laden flood of 12,000 to 20,000 ft3/s, depending on the channel roughness coefficient selected.

Open-File Report↗

Preliminary geologic map of the Simi 7.5' quadrangle, southern California: A digital database

The Simi Quadrangle covers an area of about 62 square miles in southern Ventura County. The Santa Clara River Valley occupies the northwestern corner of the quadrangle. Mountainous terrain of South Mountain and Oak Ridge characterizes the northern and central area. Elevation within the quadrangle ranges from about 250 feet along the arroyo bottoms to over 2200 feet. Steep, highly dissected slopes form much of the boundary of the area. In the southeast, Little Simi Valley, drained by Arroyo Simi/Arroyo Las Posas, separates the southern flank of Oak Ridge from the Las Posas Hills. The Las Posas upland area, a broad elevated region that slopes gently to the south, separates the South Mountain-Oak Ridge highlands from the Las Posas-Camarillo Hills between Little Simi Valley on the east and the Oxnard Plain on the west. This relatively low-lying area is also referred to as the Las Posas Valley. Numerous north-south-trending drainages cut South Mountain and Oak Ridge creating steep narrow canyons on north-facing slopes and wide flat-bottomed canyons with incised streams on south-facing slopes. A network of residential streets and ranch and oilfield roads that traverse the area from U.S. Highway 101 and State Highways 118, 23, and 126 provides access to the area. Current land use includes citrus and avocado orchards, oil well drilling and production, sand and gravel quarries, decorative-rock quarries, cattle grazing, suburban residential development, and golf courses. The oldest geologic unit mapped in the Simi Quadrangle is the upper Eocene to lower Miocene Sespe Formation. The Sespe Formation consists of alluvial fan and floodplain deposits of interbedded pebble-cobble conglomerate, massive to thick-bedded sandstone, and thin-bedded siltstone and claystone. In the northern part of the map area, Sespe Formation is overlain by and interfingers with the upper Oligocene to lower Miocene Vaqueros Formation that is composed of transitional and marine sandstone, siltstone, and claystone with local sandy coquina beds. In the Las Posas Hills, Sespe Formation is unconformably overlain by marine sandstones of the middle Miocene Topanga Group that are interlayered with and intruded by basalt flows, breccia, and diabase dikes of the Conejo Volcanics. Deep-marine strata of the upper Miocene Modelo Formation cover the Vaqueros Formation and Topanga Group along the crests and southern flanks of South Mountain and Oak Ridge. They also occur as isolated outcrops in the Las Posas Hills. Locally, Modelo Formation consists of interbedded diatomaceous shale, claystone, mudstone, and siltstone with minor sandstone, limestone, chert, and tuff beds. The most widely exposed rock units in the area are the Plio-Pleistocene marine and non-marine Pico and Saugus Formations that crop out on the southern flank of South Mountain-Oak Ridge. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-to-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southwest corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Volcanics into a local trough during Saugus time. Quaternary surficial deposits cover the floor and margins of the Little Simi Valley, Santa Clara River Valley in the north, and Arroyo Las Posas in the south, and extend up into the larger canyons that drain South Mountain and Oak Ridge. Extensive surficial deposits are also present in the Las Posas upland area in the southwest. These upper Pleistocene to Holocene sediments consist of older and younger alluvial fan and valley deposits, colluvium, active alluvial fans, and active stream deposits. Pleistocene- to Holocene-age landslide deposits are widespread throughout the Simi Quadrangle, especially in the finer grained Tertiary sedimentary units where bedding planes are dip slopes. In addition, massive slumps are present in the Sespe and Vaqueros Formations on anti-dip slopes. Seismic and well data from the San Fernando Valley (SFV) document evolution of that region from mid-Miocene rifting to north-south contraction. Formations in the western SFV subsurface (Cretaceous to Paleogene strata, and Miocene Topanga and Modelo Formations) trace southward to outcrops in the Santa Monica Mountains that constrain faulting along the valley's south basin edge. Cretaceous strata in the Simi Uplift to the west are over 2 km higher than equivalent strata beneath the western SFV across a boundary marked by the Chatsworth Reservoir fault, and Neogene thinning and offlap. The Simi fault, located at the eastern end of the Simi-Santa Rosa fault system, bounds the northern margins of the Simi and Tierra Rejada Valleys. West of Simi Valley, the Simi fault has placed Miocene Conejo Volcanics over Plio-Pleistocene Saugus Formation rocks. The 15.5 ± 0.8 m.y.a. base of the Conejo Volcanics, identified in oil well logs, is inferred to have a dip-slip separation of about 425 to 550 m, suggesting a low long-term slip rate of about 0.03 mm/yr. However, substantial late Quaternary offset is suggested by the presence of more than 150 m of Pleistocene and younger alluvium that fills the east-west trending, down-dropped bedrock trough beneath western Simi Valley. In addition, trenching within faulted colluvial deposits in Tierra Rejada Valley has revealed evidence of multiple shears within Holocene (?) deposits.

California↗