USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geological Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63Linked to original sources
USGS2012

Bedrock geology and tectonic evolution of the Wrangellia, Peninsular, and Chugach terranes along the Trans-Alaska Crustal Transect in the Chugach Mountains and southern Copper River Basin, Alaska

The Trans-Alaskan Crustal Transect in the southern Copper River Basin and Chugach Mountains traverses the margins of the Peninsular and Wrangellia terranes, and the adjacent accretionary oceanic units of the Chugach terrane to the south. The southern Wrangellia terrane margin consists of a polymetamorphosed magmatic arc complex at least in part of Pennsylvanian age (Strelna Metamorphics and metagranodiorite) and tonalitic metaplutonic rocks of the Late Jurassic Chitina magmatic arc. The southern Peninsular terrane margin is underlain by rocks of the Late Triassic (?) and Early Jurassic Talkeetna magmatic arc (Talkeetna Formation and Border Ranges ultra-mafic-mafic assemblage) on Permian or older basement rocks. The Peninsular and Wrangellia terranes are parts of a dominantly oceanic superterrane (composite Terrane II) that was amalgamated by Late Triassic time and was accreted to terranes of continental affinity north of the Denali fault system in the mid- to Late Cretaceous. The Chugach terrane in the transect area consists of three successively accreted units: (1) minor greenschist and intercalated blueschist, the schist of Liberty Creek, of unknown protolith age that was metamorphosed and probably accreted during the Early Jurassic, (2) the McHugh Complex (Late Triassic to mid-Cretaceous protolith age), a melange of mixed oceanic, volcaniclastic, and olistostromal rocks that is metamorphosed to prehnite-pumpellyite and lower greenschist facies that was accreted by middle Cretaceous time, and (3) the Upper Cretaceous Valdez Group, mainly magmatic arc-derived flysch and lesser oceanic volcanic rocks of greenschist facies that was accreted by early Paleocene time. A regional thermal event that culminated in early middle Eocene time (48–52 Ma) resulted in widespread greenschist facies metamorphism and plutonism.

Journal of Geophysical Research Solid Earth↗
USGS2009

New evidence for a magmatic influence on the origin of Valles Marineris, Mars

In this paper, we show that the complex geological evolution of Valles Marineris, Mars, has been highly influenced by the manifestation of magmatism (e.g., possible plume activity). This is based on a diversity of evidence, reported here, for the central part, Melas Chasma, and nearby regions, including uplift, loss of huge volumes of material, flexure, volcanism, and possible hydrothermal and endogenic-induced outflow channel activity. Observations include: (1) the identification of a new > 50??km-diameter caldera/vent-like feature on the southwest flank of Melas, which is spatially associated with a previously identified center of tectonic activity using Viking data; (2) a prominent topographic rise at the central part of Valles Marineris, which includes Melas Chasma, interpreted to mark an uplift, consistent with faults that are radial and concentric about it; (3) HiRISE-identified landforms along the floor of the southeast part of Melas Chasma that are interpreted to reveal a volcanic field; (4) CRISM identification of sulfate-rich outcrops, which could be indicative of hydrothermal deposits; (5) GRS K/Th signature interpreted as water-magma interactions and/or variations in rock composition; and (6) geophysical evidence that may indicate partial compensation of the canyon and/or higher density intrusives beneath it. Long-term magma, tectonic, and water interactions (Late Noachian into the Amazonian), albeit intermittent, point to an elevated life potential, and thus Valles Marineris is considered a prime target for future life detection missions. ?? 2008 Elsevier B.V.

Journal of Volcanology and Geothermal Research↗
USGS2018

Insights into the emplacement of upper-crustal plutons and their relationship to large silicic calderas, from field relationships, geochronology, and zircon trace element geochemistry in the Stillwater – Clan Alpine caldera complex, western Nevada, USA

Geologic mapping, new U-Pb zircon ages, and new and published 40 Ar/ 39 Ar sanidine ages document the timing and extent of Oligocene magmatism in the southern Stillwater Range and Clan Alpine Mountains of western Nevada, where Miocene extension has exposed at least six nested silicic calderas and underlying granitic plutons to crustal depths locally ≥ 9 km. Both caldera-forming rhyolitic tuffs and underlying plutons were emplaced in two episodes, one from about 30.4–28.2 Ma that included the Deep Canyon, Job Canyon, and Campbell Creek calderas and underlying plutons, and one from about 25.3–24.8 Ma that included the Louderback Mountains, Poco Canyon, and Elevenmile Canyon calderas and underlying plutons. In these two 1–2 m.y. periods, almost the entire Mesozoic upper crust was replaced by Oligocene intrusive and extrusive rocks to depths ≥ 9 km over an estimated total area of ~ 1500 km 2 (pre-extension). Zircon trace element geochemistry indicates that some plutonic rock can be solidified residual magma from the tuff eruptions. Most plutons are not solidified residual magma, although they directly underlie calderas and were emplaced along the same structures shortly after to as much as one million years after caldera formation. Magma chambers and plutons grew by floor subsidence accommodated by downward transfer of country rocks. If other Great Basin calderas are similar, the dense concentration of shallowly exposed calderas in central Nevada is underlain by a complexly zoned mid-Cenozoic batholith assembled in discrete pulses that coincided with formation of large silicic calderas up to 2500–5000 km 3 .

Nevada↗
USGS1955

U.S. Geological Survey Trace Elements and related reports through 1954

This report supersedes TEI-400, "U.S. Geological Survey Trace Elements and related reports through 1953." Part I is a numerical list of U.S. Geological Survey Trace Elements Investigations and Memorandum reports. This part lists not only reports (followed by a date) that have been transmitted to the U.S> Atomic Energy Commission, but also reports in preparation (followed by an asterisk) for which tentative titles were available on December 31, 1954. If a report, or portion of a report, has been published, the fact is indicated by the abbreviation of the medium of publication. (See also Part II.) Part II is a reference guide to Trace Elements and related reports that are available to the public (this part supersedes Part I of Bulletin 1019-B). These reports are grouped according to the type of publication or release. If a report, or portion of the report, has been published in more than one form, appropriate cross-references are given to indicate the other forms of publication. Abstracts published in Nuclear Science Abstracts are not included in Part II; however, if the abstract of a Trace Elements report has been published in NSA, the fact is indicated in Part I. Publications in process on December 31, 1954, are designated by an asterisk. Part III is a finding list of states, areas, and subjects and supersedes Part II of Bulletin 1019-B. It is based on information derived mostly from the titles of reports and, where titles are of general nature, from a cursory review of the reports. This list is not a complete index of the information given in Trace Elements and related reports, but is designed to find subjects of major interest, Because of the numerous entries for Colorado and Utah, information has been listed by counties and, where possible, by subject under these states. Other states have county listings only if a county is included in the title of a report; otherwise, area may be listed separately under the state. Major subjects are listed separately in the index and also, where appropriate under states. Analytical methods and subjects related to analytical research are listed under Analytical Methods and Research, but not separately throughout the index. Most mineralogic studies are included under the heading Mineralogy, but are not necessarily listed according to location. Part IV is an author index. The words “with” and “and” are used to indicate seniority of authorship. For example, a listing of Smith and Brown indicated that Smith is the senior author. A listing of Smith with Brown indicates that Brown is the senior author. In both parts III and IV all Trace Elements reports are listed, as well as other related reports that have not been issued as Trace Elements reports. The following abbreviations have been used: TEI, Trace Elements Investigations report; TEM, Trace Elements Memorandum report; OF, open file; TIS, Technical Information Service release; C, Circular; B, Bulletin; P, Professional Paper; MC, Maps and Charts; J, Journal; and NSA, Nuclear Science Abstracts.

Trace Elements Investigations↗
USGS1991

A geochemical model of the Platanares geothermal system, Honduras

Results of exploration drilling combined with results of geologic, geophysical, and hydrogeochemical investigations have been used to construct a geochemical model of the Platanares geothermal system, Honduras. Three coreholes were drilled, two of which produced fluids from fractured Miocene andesite and altered Cretaceous to Eocene conglomerate at 450 to 680 m depth. Large volume artesian flows of 160-165??C, predominantly bicarbonate water are chemically similar to, but slightly less saline than widespread boiling hot-spring waters. The chemistry of the produced fluid is dominated by equilibrium reactions in sedimentary rocks at greater depths and higher temperatures than those measured in the wells. Chemical, isotope, and gas geothermometers indicate a deep fluid temperature of 200-245??C and reflect a relatively short residence time in the fractures feeding the wells. Chloride-enthalpy relations as well as isotopic and chemical compositions of well discharges, thermal springs, and local cold waters support a conceptual model of ascending high-temperature (minimum 225??C) parent fluid that has cooled conductively to form the 160-165??C shallow (to 680 m) fluid encountered by the wells. The hot-spring waters are formed by boiling and steam loss from more or less conductively cooled parent fluid. The more dilute boiling spring waters (Cl = ???32 mg/kg) have cooled from > 225??C to about 160??C by conduction and from 160??C to 98??C by boiling. The most concentrated boiling spring waters (Cl = 37 mg/kg) have cooled from > 225??C to about 200??C by conduction and from 200??C to 98??C by boiling. Intermediate concentrations reflect mixed cooling paths. ?? 1991.

Journal of Volcanology and Geothermal Research↗
USGS2011

The human dimension of fire regimes on Earth

Humans and their ancestors are unique in being a fire‐making species, but ‘natural’ (i.e. independent of humans) fires have an ancient, geological history on Earth. Natural fires have influenced biological evolution and global biogeochemical cycles, making fire integral to the functioning of some biomes. Globally, debate rages about the impact on ecosystems of prehistoric human‐set fires, with views ranging from catastrophic to negligible. Understanding of the diversity of human fire regimes on Earth in the past, present and future remains rudimentary. It remains uncertain how humans have caused a departure from ‘natural’ background levels that vary with climate change. Available evidence shows that modern humans can increase or decrease background levels of natural fire activity by clearing forests, promoting grazing, dispersing plants, altering ignition patterns and actively suppressing fires, thereby causing substantial ecosystem changes and loss of biodiversity. Some of these contemporary fire regimes cause substantial economic disruptions owing to the destruction of infrastructure, degradation of ecosystem services, loss of life, and smoke‐related health effects. These episodic disasters help frame negative public attitudes towards landscape fires, despite the need for burning to sustain some ecosystems. Greenhouse gas‐induced warming and changes in the hydrological cycle may increase the occurrence of large, severe fires, with potentially significant feedbacks to the Earth system. Improved understanding of human fire regimes demands: (1) better data on past and current human influences on fire regimes to enable global comparative analyses, (2) a greater understanding of different cultural traditions of landscape burning and their positive and negative social, economic and ecological effects, and (3) more realistic representations of anthropogenic fire in global vegetation and climate change models. We provide an historical framework to promote understanding of the development and diversification of fire regimes, covering the pre‐human period, human domestication of fire, and the subsequent transition from subsistence agriculture to industrial economies. All of these phases still occur on Earth, providing opportunities for comparative research.

Journal of Biogeography↗
USGS2019

India National Gas Hydrate Program Expedition-02: Operational and technical summary

The India National Gas Hydrate Program is being steered by the government of India's Ministry of Petroleum and Natural Gas (MoPNG) with participation of Directorate General of Hydrocarbons (DGH), Oil and Natural Gas Corporation Limited (ONGC), and the National Oil Companies and Research Institutes of India. The India National Gas Hydrate Program Expedition 01 (NGHP-01) established the presence of gas hydrate in the Krishna Godavari (KG) and Mahanadi Basins and in the offshore area of the Andaman Sea Basin. However, the gas hydrates discovered during NGHP-01 were mainly distributed as fracture-filling material in fine-grained clay-rich sediments. The India National Gas Hydrate Program Expedition 02 (NGHP-02) was carried out with an objective to discover gas hydrate in sand-rich sediment along the eastern offshore margin of India. ONGC planned and executed NGHP-02 on the behalf of the MoPNG. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) tools and an additional 17 holes were then drilled and/or cored with conventional coring tools (HPCS/ESCS) or pressure coring tools (PCTB). Wireline logging was conducted in 10 holes and formation tests using a dual packer Modular Formation Dynamics Tester (MDT) tool were carried out in two holes. The onboard science team used the laboratory facilities on the D/V Chikyu to examine and analyse the physical properties, geochemistry, and sedimentology of all the cores collected during the expedition. Core samples were also analysed in additional post-expedition shore-based studies conducted in numerous domestic and international gas hydrate research laboratories. The NGHP-02 sediment cores were archived at the National Gas Hydrate Core Repository in Mumbai (India), which is associated with the ONGC Gas Hydrate Research and Technology Centre (GHRTC). The necessary data for characterizing the occurrence of gas hydrate, such as interstitial water chlorinities, core-derived gas chemistry, physical and sedimentological properties, thermal images of the recovered cores, pressure core and downhole measured logging data (LWD and/or conventional wireline log data), were obtained from most of the drill sites established during NGHP-02. Almost all the drill sites yielded evidence for the occurrence of gas hydrate; however, the inferred in situ concentration of gas hydrate varied substantially from site to site. For the most part, the interpretation of downhole logging data, core thermal images, interstitial water analyses, and pressure core images from the sites established during NGHP-02 indicate that the occurrence of concentrated gas hydrate is mostly associated with coarser grained (sand-rich) sediments. This paper presents the operational and technical summary of NGHP-02. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) to

Journal of Marine and Petroleum Geology↗
USGS2006

Volcanic history and 40 Ar/ 39 Ar and 14 C geochronology of Terceira Island, Azores, Portugal

Seven new 40 Ar/ 39 Ar and 23 new radiocarbon ages of eruptive units, in support of new geologic mapping, improve the known chronology of Middle to Late Pleistocene and Holocene volcanic activity on the island of Terceira, Azores and define an east-to-west progression in stratovolcano growth. The argon ages indicate that Cinco Picos Volcano, the oldest on Terceira, completed its main subaerial cone building activity by about 370–380 ka. Collapse of the upper part of the stratovolcanic edifice to form a 7 × 9 km caldera occurred some time after 370 ka. Postcaldera eruptions of basalt from cinder cones on and near the caldera floor and trachytic pyroclastic flow and pumice fall deposits from younger volcanoes west of Cinco Picos have refilled much of the caldera. The southern portion of Guilherme Moniz Volcano, in the central part of the island, began erupting prior to 270 ka and produced trachyte domes, flows, and minor pyroclastic deposits until at least 111 ka. The northern part of Guilherme Moniz Caldera is less well exposed than the southern part, but reflects a similar age range. The northwest portion of the caldera was formed sometime after 44 ka. Several well-studied ignimbrites that blanket much of the island likely erupted from Guilherme Moniz Volcano. The Pico Alto Volcanic Center, a tightly spaced cluster of trachyte domes and short flows, is a younger part of Guilherme Moniz Volcano. Stratigraphic studies and our new radiocarbon ages suggest that most of the Pico Alto eruptions occurred during the period from about 9000 to 1000 years BP. Santa Barbara Volcano is the youngest stratovolcano on Terceira, began erupting prior to 29 ka, and has been active historically.

Azores↗
USGS2005

Historical shoreline changes along the US Gulf of Mexico: A summary of recent shoreline comparisons and analyses

The US Geological Survey is systematically analyzing historical shoreline changes along open-ocean sandy shores of the United States. This National Assessment of Shoreline Change Project is developing standard repeatable methods for mapping and analyzing shoreline movement so that internally consistent updates can periodically be made to record coastal erosion and land loss along US shores. Recently, shoreline change maps and a report were published for states bordering the Gulf of Mexico. Long-term and short-term average rates of change were calculated by comparing three historical shorelines (1800s, 1930s, 1970s) with an operational mean high water shoreline derived from lidar (light detection and ranging) surveys (post-1998). The rates of change, statistical uncertainties, original shorelines, and complementary geographic information system layers, such as areas of beach nourishment, are available on an Internet Map Server (IMS). For the Gulf of Mexico region, rates of erosion are generally highest in Louisiana along barrier island and headland shores associated with the Mississippi delta. Erosion also is rapid along some barrier islands and headlands in Texas, whereas barrier islands in Mississippi are migrating laterally. Highest rates of erosion in Florida are generally localized around tidal inlets. The most stable Gulf beaches generally are along the west coast of Florida, where low wave energy and frequent beach nourishment minimize erosion. Some long beach segments in Texas have accreted as a result of net longshore drift convergence and around tidal inlets that have been stabilized by long jetties. Individuals and some communities have attempted to mitigate the effects of erosion by emplacement of coastal structures, but those efforts largely have been abandoned in favor of periodic beach nourishment.

Journal of Coastal Research↗
USGS1991

Exploration drilling and reservoir model of the Platanares geothermal system, Honduras, Central America

Results of drilling, logging, and testing of three exploration core holes, combined with results of geologic and hydrogeochemical investigations, have been used to present a reservoir model of the Platanares geothermal system, Honduras. Geothermal fluids circulate at depths ??? 1.5 km in a region of active tectonism devoid of Quaternary volcanism. Large, artesian water entries of 160 to 165??C geothermal fluid in two core holes at 625 to 644 m and 460 to 635 m depth have maximum flow rates of roughly 355 and 560 l/min, respectively, which are equivalent to power outputs of about 3.1 and 5.1 MW(thermal). Dilute, alkali-chloride reservoir fluids (TDS ??? 1200 mg/kg) are produced from fractured Miocene andesite and Cretaceous to Eocene redbeds that are hydrothermally altered. Fracture permeabillity in producing horizons is locally greater than 1500 and bulk porosity is ??? 6%. A simple, fracture-dominated, volume-impedance model assuming turbulent flow indicates that the calculated reservoir storage capacity of each flowing hole is approximately 9.7 ?? 106 l/(kg cm-2), Tritium data indicate a mean residence time of 450 yr for water in the reservoir. Multiplying the natural fluid discharge rate by the mean residence time gives an estimated water volume of the Platanares system of ??? 0.78 km3. Downward continuation of a 139??C/km "conductive" gradient at a depth of 400 m in a third core hole implies that the depth to a 225??C source reservoir (predicted from chemical geothermometers) is at least 1.5 km. Uranium-thorium disequilibrium ages on calcite veins at the surface and in the core holes indicate that the present Platanares hydrothermal system has been active for the last 0.25 m.y. ?? 1991.

Journal of Volcanology and Geothermal Research↗
USGS2003

Inverse modeling of BTEX dissolution and biodegradation at the Bemidji, MN crude-oil spill site

The U.S. Geological Survey (USGS) solute transport and biodegradation code BIOMOC was used in conjunction with the USGS universal inverse modeling code UCODE to quantify field-scale hydrocarbon dissolution and biodegradation at the USGS Toxic Substances Hydrology Program crude-oil spill research site located near Bemidji, MN. This inverse modeling effort used the extensive historical data compiled at the Bemidji site from 1986 to 1997 and incorporated a multicomponent transport and biodegradation model. Inverse modeling was successful when coupled transport and degradation processes were incorporated into the model and a single dissolution rate coefficient was used for all BTEX components. Assuming a stationary oil body, we simulated benzene, toluene, ethylbenzene, m , p -xylene, and o -xylene (BTEX) concentrations in the oil and ground water, respectively, as well as dissolved oxygen. Dissolution from the oil phase and aerobic and anaerobic degradation processes were represented. The parameters estimated were the recharge rate, hydraulic conductivity, dissolution rate coefficient, individual first-order BTEX anaerobic degradation rates, and transverse dispersivity. Results were similar for simulations obtained using several alternative conceptual models of the hydrologic system and biodegradation processes. The dissolved BTEX concentration data were not sufficient to discriminate between these conceptual models. The calibrated simulations reproduced the general large-scale evolution of the plume, but did not reproduce the observed small-scale spatial and temporal variability in concentrations. The estimated anaerobic biodegradation rates for toluene and o -xylene were greater than the dissolution rate coefficient. However, the estimated anaerobic biodegradation rates for benzene, ethylbenzene, and m , p -xylene were less than the dissolution rate coefficient. The calibrated model was used to determine the BTEX mass balance in the oil body and groundwater plume. Dissolution from the oil body was greatest for compounds with large effective solubilities (benzene) and with large degradation rates (toluene and o -xylene). Anaerobic degradation removed 77% of the BTEX that dissolved into the water phase and aerobic degradation removed 17%. Although goodness-of-fit measures for the alternative conceptual models were not significantly different, predictions made with the models were quite variable.

Minnesota↗
USGS2006

Geodetic observations and modeling of magmatic inflation at the Three Sisters volcanic center, central Oregon Cascade Range, USA

Tumescence at the Three Sisters volcanic center began sometime between summer 1996 and summer 1998 and was discovered in April 2001 using interferometric synthetic aperture radar (InSAR). Swelling is centered about 5 km west of the summit of South Sister, a composite basaltic-andesite to rhyolite volcano that last erupted between 2200 and 2000 yr ago, and it affects an area ∼20 km in diameter within the Three Sisters Wilderness. Yearly InSAR observations show that the average maximum displacement rate was 3–5 cm/yr through summer 2001, and the velocity of a continuous GPS station within the deforming area was essentially constant from June 2001 to June 2004. The background level of seismic activity has been low, suggesting that temperatures in the source region are high enough or the strain rate has been low enough to favor plastic deformation over brittle failure. A swarm of about 300 small earthquakes ( M max = 1.9) in the northeast quadrant of the deforming area on March 23–26, 2004, was the first notable seismicity in the area for at least two decades. The U.S. Geological Survey (USGS) established tilt-leveling and EDM networks at South Sister in 1985–1986, resurveyed them in 2001, the latter with GPS, and extended them to cover more of the deforming area. The 2001 tilt-leveling results are consistent with the inference drawn from InSAR that the current deformation episode did not start before 1996, i.e., the amount of deformation during 1995–2001 from InSAR fully accounts for the net tilt at South Sister during 1985–2001 from tilt-leveling. Subsequent InSAR, GPS, and leveling observations constrain the source location, geometry, and inflation rate as a function of time. A best-fit source model derived from simultaneous inversion of all three datasets is a dipping sill located 6.5 ± 2.5 km below the surface with a volume increase of 5.0 × 10 6 ± 1.5 × 10 6 m 3 /yr (95% confidence limits). The most likely cause of tumescence is a pulse of basaltic magma intruding the upper crust along the brittle–ductile interface — a process that must occur episodically beneath the Cascade Range but in the past would have escaped detection in the absence of unusual seismicity. We speculate that such intrusive episodes last from days to years and are separated by quiescent periods of decades to centuries. The likelihood that the current episode at Three Sisters will culminate in an eruption is judged to be low, but the impact of an eruption could be great. The USGS has updated its volcano hazards assessment for the Three Sisters region, notified appropriate agencies and the public, and is helping to prepare an emergency coordination and communication plan.

Central Oregon Cascade Range, Three Sisters volcan↗
USGS2012

Standardizing texture and facies codes for a process-based classification of clastic sediment and rock

Proposed here is a universally applicable, texturally based classification of clastic sediment that is independent from composition, cementation, and geologic environment, is closely allied to process sedimentology, and applies to all compartments in the source-to-sink system. The classification is contingent on defining the term "clastic" so that it is independent from composition or origin and includes any particles or grains that are subject to erosion, transportation, and deposition. Modifications to Folk's (1980) texturally based classification that include applying new assumptions and defining a broader array of textural fields are proposed to accommodate this. The revised ternary diagrams include additional textural fields that better define poorly sorted and coarse-grained deposits, so that all end members (gravel, sand, and mud size fractions) are included in textural codes. Revised textural fields, or classes, are based on a strict adherence to volumetric estimates of percentages of gravel, sand, and mud size grain populations, which by definition must sum to 100%. The new classification ensures that descriptors are applied consistently to all end members in the ternary diagram (gravel, sand, and mud) according to several rules, and that none of the end members are ignored. These modifications provide bases for standardizing vertical displays of texture in graphic logs, lithofacies codes, and their derivatives- hydrofacies. Hydrofacies codes are nondirectional permeability indicators that predict aquifer or reservoir potential. Folk's (1980) ternary diagram for fine-grained clastic sediments (sand, silt, and clay size fractions) is also revised to preserve consistency with the revised diagram for gravel, sand, and mud. Standardizing texture ensures that the principles of process sedimentology are consistently applied to compositionally variable rock sequences, such as mixed carbonate-siliciclastic ramp settings, and the extreme ends of depositional systems.

Journal of Sedimentary Research↗
USGS2009

Rates and trends of coastal change in california and the regional behavior of the beach and cliff system

The U.S. Geological Survey (USGS) recently completed an analysis of shoreline change and cliff retreat along the California coast. This is the first regional, systematic measurement of coastal change conducted for the West Coast. Long-term (-120 y) and short-term (-25 y) shoreline change rates were calculated for more than 750 km of coastline, and 70 year cliff-retreat rates were generated for 350 km of coast. Results show that 40% of California's beaches were eroding in the long term. This number increased to 66% in the short term, indicating that many beaches have shifted toward a state of chronic erosion. The statewide average net shoreline change rates for the long and short term were 0.2 m/y and -0.2 m/y, respectively. The long-term accretional signal is likely related to large coastal engineering projects in some parts of the state and to large fluxes of sediment from rivers in other areas. The cliff-retreat assessment yielded a statewide average of -0.3 m/y. It was found that Northern California has the highest overall retreat rates, which are influenced by erosion hot spots associated with large coastal landslides and slumps. The databases established as part of the shoreline change and cliff-retreat analyses were further investigated to examine the dynamics of the beach/cliff system. A correlation analysis identified a strong relationship between the geomorphology of the coast and the behavior of the beach/cliff system. Areas of high-relief coast show negative correlations, indicating that higher rates of cliff retreat correlate with lower rates of shoreline erosion. In contrast, low- to moderate-relief coasts show strong positive correlations, wherein areas of high shoreline change correspond to areas of high cliff retreat.

Journal of Coastal Research↗
USGS2016

Geologic history of Martian regolith breccia Northwest Africa 7034: Evidence for hydrothermal activity and lithologic diversity in the Martian crust

The timing and mode of deposition for Martian regolith breccia Northwest Africa (NWA) 7034 were determined by combining petrography, shape analysis, and thermochronology. NWA 7034 is composed of igneous, impact, and brecciated clasts within a thermally annealed submicron matrix of pulverized crustal rocks and devitrified impact/volcanic glass. The brecciated clasts are likely lithified portions of Martian regolith with some evidence of past hydrothermal activity. Represented lithologies are primarily ancient crustal materials with crystallization ages as old as 4.4 Ga. One ancient zircon was hosted by an alkali-rich basalt clast, confirming that alkalic volcanism occurred on Mars very early. NWA 7034 is composed of fragmented particles that do not exhibit evidence of having undergone bed load transport by wind or water. The clast size distribution is similar to terrestrial pyroclastic deposits. We infer that the clasts were deposited by atmospheric rainout subsequent to a pyroclastic eruption(s) and/or impact event(s), although the ancient ages of igneous components favor mobilization by impact(s). Despite ancient components, the breccia has undergone a single pervasive thermal event at 500–800°C, evident by groundmass texture and concordance of ~1.5 Ga dates for bulk rock K-Ar, U-Pb in apatite, and U-Pb in metamict zircons. The 1.5 Ga age is likely a thermal event that coincides with rainout/breccia lithification. We infer that the episodic process of regolith lithification dominated sedimentary processes during the Amazonian Epoch. The absence of pre-Amazonian high-temperature metamorphic events recorded in ancient zircons indicates source domains of static southern highland crust punctuated by episodic impact modification.

Journal of Geophysical Research E: Planets↗
USGS2012

Fracture characterization by means of attenuation and generation of tube waves in fractured crystalline rock at Mirror Lake, New Hampshire

Results are presented from experiments carried out in conjunction with the U. S. Geological Survey at the Hubbard Brook Experimental Forest near Mirror Lake, New Hampshire. The study focuses on our ability to obtain orientation and transmissivity estimates of naturally occurring fractures. The collected data set includes a four-offset hydrophone vertical seismic profile, full waveform acoustic logs at 5, 15, and 34 kHz, borehole televiewer, temperature, resistivity, and self-potential logs, and borehole-to-borehole pump test data. Borehole televiewer and other geophysical logs indicate that permeable fractures intersect the Mirror Lake boreholes at numerous depths, but less than half of these fractures appear to have significant permeability beyond the annulus of drilling disturbance on the basis of acoustic waveform log analysis. The vertical seismic profiling (VSP) data indicate a single major permeable fracture near a depth of 44 m, corresponding to one of the most permeable fractures identified in the acoustic waveform log analysis. VSP data also indicate a somewhat less permeable fracture at 220 m and possible fractures at depths of 103 and 135 m; all correspond to major permeable fractures in the acoustic waveform data set. Pump test data confirm the presence of a hydraulic connection between the Mirror Lake boreholes through a shallow dipping zone of permeability at 44 m in depth. Effective fracture apertures calculated from modeled transmissivities correspond to those estimated for the largest fractures indicated on acoustic waveform logs but are over an order of magnitude larger than effective apertures calculated from tube waves in the VSP data set. This discrepancy is attributed to the effect of fracture stiffness. A new model is presented to account for the mechanical strength of asperities in resisting fracture closure during the passage of seismic waves during the generation of VSPs.

New Hampshire↗
USGS2001

Mars Global Surveyor Thermal Emission Spectrometer experiment: Investigation description and surface science results

The Thermal Emission Spectrometer (TES) investigation on Mars Global Surveyor (MGS) is aimed at determining (1) the composition of surface minerals, rocks, and ices; (2) the temperature and dynamics of the atmosphere; (3) the properties of the atmospheric aerosols and clouds; (4) the nature of the polar regions; and (5) the thermophysical properties of the surface materials. These objectives are met using an infrared (5.8- to 50-μm) interferometric spectrometer, along with broadband thermal (5.1- to 150-μm) and visible/near-IR (0.3- to 2.9-μm) radiometers. The MGS TES instrument weighs 14.47 kg, consumes 10.6 W when operating, and is 23.6×35.5×40.0 cm in size. The TES data are calibrated to a 1-σ precision of 2.5 −6 ×10 −8 W cm −2 sr −1 /cm −1 , 1.6×10 −6 W cm −2 sr −1 , and ∼0.5 K in the spectrometer, visible/near-IR bolometer, and IR bolometer, respectively. These instrument subsections are calibrated to an absolute accuracy of ∼4×10 −8 W cm −2 sr −1 /cm −1 (0.5 K at 280 K), 1–2%, and ∼1–2 K, respectively. Global mapping of surface mineralogy at a spatial resolution of 3 km has shown the following: (1) The mineralogic composition of dark regions varies from basaltic, primarily plagioclase feldspar and clinopyroxene, in the ancient, southern highlands to andesitic, dominated by plagioclase feldspar and volcanic glass, in the younger northern plains. (2) Aqueous mineralization has produced gray, crystalline hematite in limited regions under ambient or hydrothermal conditions; these deposits are interpreted to be in-place sedimentary rock formations and indicate that liquid water was stable near the surface for a long period of time. (3) There is no evidence for large-scale (tens of kilometers) occurrences of moderate-grained (>50-μm) carbonates exposed at the surface at a detection limit of ∼10%. (4) Unweathered volcanic minerals dominate the spectral properties of dark regions, and weathering products, such as clays, have not been observed anywhere above a detection limit of ∼10%; this lack of evidence for chemical weathering indicates a geologic history dominated by a cold, dry climate in which mechanical, rather than chemical, weathering was the significant form of erosion and sediment production. (5) There is no conclusive evidence for sulfate minerals at a detection limit of ∼15%. The polar region has been studied with the following major conclusions: (1) Condensed CO 2 has three distinct end-members, from fine-grained crystals to slab ice. (2) The growth and retreat of the polar caps observed by MGS is virtually the same as observed by Viking 12 Martian years ago. (3) Unique regions have been identified that appear to differ primarily in the grain size of CO 2 ; one south polar region appears to remain as black slab CO 2 ice throughout its sublimation. (4) Regional atmospheric dust is common in localized and regional dust storms around the margin and interior of the southern cap. Analysis of the thermophysical properties of the surface shows that (1) the spatial pattern of albedo has changed since Viking observations, (2) a unique cluster of surface materials with intermediate inertia and albedo occurs that is distinct from the previously identified low-inertia/bright and high-inertia/dark surfaces, and (3) localized patches of high-inertia material have been found in topographic lows and may have been formed by a unique set of aeolian, fluvial, or erosional processes or may be exposed bedrock.

Journal of Geophysical Research E: Planets↗
USGS1997

Crustal implications of bedrock geology along the Trans-Alaska Crustal Transect (TACT) in the Brooks Range, northern Alaska

Geologic mapping of the Trans-Alaska Crustal Transect (TACT) project along the Dalton Highway in northern Alaska indicates that the Endicott Mountains allochthon and the Hammond terrane compose a combined allochthon that was thrust northward at least 90 km in the Early Cretaceous. The basal thrust of the combined allochthon climbs up section in the hanging wall from a ductile shear zone in the south through lower Paleozoic rocks of the Hammond terrane and into Upper Devonian rocks of the Endicott Mountains allochthon at the Mount Doonerak antiform, culminating in Early Cretaceous shale in the northern foothills of the Brooks Range. Footwall rocks north of the Mount Doonerak antiform are everywhere parautochthonous Permian and Triassic shale of the North Slope terrane rather than Jurassic and Lower Cretaceous strata of the Colville Basin as shown in most other tectonic models of the central Brooks Range. Stratigraphic and structural relations suggest that this thrust was the basal detachment for Early Cretaceous deformation. Younger structures, such as the Tertiary Mount Doonerak antiform, deform the Early Cretaceous structures and are cored by thrusts that root at a depth of about 10 to 30 km along a deeper detachment than the Early Cretaceous detachment. The Brooks Range, therefore, exposes (1) an Early Cretaceous thin-skinned deformational belt developed during arc-continent collision and (2) a mainly Tertiary thick-skinned orogen that is probabty the northward continuation of the Rocky Mountains orogenic belt. A down-to-the-south zone of both ductile and brittle normal faulting along the southern margin of the Brooks Range probably formed in the mid-Cretaceous by extensional exhumation of the Early Cretaceous contractional deformation.

Journal of Geophysical Research B: Solid Earth↗