SEARCH · USGS Science

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources

USGS2015

Field trip guidebook for the post-meeting field trip: The Central Appalachians

The lower Paleozoic rocks to be examined on this trip through the central Appalachians represent an extreme range of depositional environments. The lithofacies we will examine range from pelagic radiolarian chert and interbedded mudstone that originated on the deep floor of the Iapetus Ocean, through mud cracked supratidal dolomitic laminites that formed during episodes of emergence of the long-lived Laurentian carbonate platform, to meandering fluvial conglomerate and interstratified overbank mudstone packages deposited in the latest stages of infilling of the Taconic foredeep. In many ways this field trip is about contrasts. The Upper Cambrian (Furongian) and Lower Ordovician deposits of the Sauk megasequence record deposition controlled primarily by eustatic sea level sea level fluctuations that influenced deposition along the passive, southern (Appalachian) margin of the paleocontinent of Laurentia. The only tectonic influence apparent in these passive margin deposits is the expected thickening of the carbonate stack toward the platform margin as compared to the thinner (and typically shallower) facies that formed farther in toward the paleoshoreline. Carbonates overwhelmingly dominate the passive margin succession. Clastic influx was minimal and consisted largely of eastward transport of clean cratonic sands across the platform from the adjacent inner detrital belt to the west during higher order (2nd and 3rd order) regressions. In contrast, Middle and Upper Ordovician deposits of the Tippecanoe megasequence record the strong influence of tectonics, specifically Iapetus closure. The first signal of this tectonic transformation was the arrival of arc-related ash beds that abound in the active margin carbonates. Subsequent intensification of Taconic orogenesis resulted in the foundering of the carbonate platform under the onslaught of fine siliciclastics arriving from offshore tectonic sources to the east, creating a deep marine flysch basin where graptolitic shale and sandstone turbidites accumulated. The foreland basin thus created would fill with progressively coarser and more shallow/proximal clastic facies through the Upper Ordovician, culminating in deposition of fluvial redbeds that cap the Taconic clastic wedge. Arguably the most controversial rocks within the Tippecanoe Sequence in this area are unusual, Lower Ordovician deep marine facies that are associated with the much younger flysch of the Martinsburg Formation in the Great Valley of eastern Pennsylvania. Long considered the erosional remnants of a Taconic-style thrust sheet, and referred to as the Hamburg Klippe, these deep marine deposits have recently been reinterpreted as olistostromal deposits that were introduced by gravity sliding into the flysch basin contemporaneous with Martinsburg deposition. Besides their constituent lithofacies, rocks of the Sauk and Tippecanoe megasequences also present a stark contrast in faunas. Cambrian and Lower Ordovician faunas predate the Great Ordovician Biodiversification Event (GOBE), a global event that saw unprecedented diversification within many major invertebrate groups (mollusks, corals, and bryozoans to name a few) that previously were only minor components of the marine fauna. Unfortunately, the much higher diversity of Middle and Upper Ordovician faunas wrought by the GOBE is somewhat muted in this region by the stresses introduced by conversion of the Appalachian shelf into a flysch basin. Another noteworthy difference between the Cambrian and Ordovician biota related to the paleogeographic setting of the rocks to be examined on this trip derives from their evolution in the shallow marine environments of Laurentia. Several shelf-wide extinctions decimated the shallow marine faunas of the Laurentian shelf through the late Cambrian producing stage-level biostratigraphic units known as biomeres. The biomere phenomenon is discussed in this guidebook and a few stops to examine Cambrian faunas and one biomere boundary extinction are included to provide contrast with stage boundary extinctions that occurred later, in the Ordovician, that lack the defining attributes of the biomere boundary extinctions. Again, it’s all about contrast.

Central Appalachians↗

USGS2018

Kinematic, deformational, and thermochronologic conditions along the Gossan Lead and Fries shear zones: Constraining the western-eastern Blue Ridge boundary in northwestern North Carolina

The fault boundary between the western and eastern Blue Ridge (WBR-EBR) in the southern Appalachians separates Mesoproterozoic basement rocks and their cover from Neoproterozoic to Paleozoic accreted rocks. Several northeast striking faults delineate the boundary, including the Gossan Lead shear zone in northwestern North Carolina. Varying tectonic interpretations of WBR-EBR boundary include a premetamorphic fault, an Acadian dextral strike-slip fault, or an Alleghanian fault. We use field-based, microstructural, and theromochronometric analyses to determine the conditions, kinematics, and timing of deformation, in order to distinguish among competing hypotheses for the Gossan Lead shear zone. This comprehensive approach has allowed us to attribute a number of new and previously observed tectonic fabrics to specific orogenic events; key relationships necessary to the study of multiply deformed tectonic margins. Detailed mapping and microstructural analysis of the Gossan Lead shear zone document a several kilometer-wide mylonitic zone with kinematic indicators that record dominantly top-to-the-NW thrust motion, with local strike-slip and normal sense indicators. Dynamically recrystallized quartz and feldspar constrain a range of deformation conditions from amphibolite to greenschist facies. Two unaltered lineation-forming amphiboles from mylonitic amphibolites record 40 Ar/ 39 Ar cooling ages of 347–345 Ma, and a mylonitized metagraywacke records a muscovite 40 Ar/ 39 Ar cooling age of 336 Ma. These data are consistent with dominantly NW directed thrusting along the Gossan Lead shear zone at amphibolite to greenschist facies conditions, and rapid cooling in the Middle Mississippian. We suggest these data support overprinting and/or reactivation of an earlier structure along this complexly deformed boundary by 336 Ma.

North Carolina↗

USGS2021

Gondwanic inheritance on the building of the western Central Andes (Domeyko Range, Chile): Structural and thermochronological approach (U-Pb and 40Ar-39Ar)

Tectonics inheritance controls the evolution of many orogens. To unravel the role of the Gondwanan heritage (late Paleozoic to Triassic) over the building of the Central Andes in northern Chile (Domeyko Range), we performed detrital U‐Pb zircon and 40 Ar/ 39 Ar muscovite geochronology along with structural analyses (kinematics and structural balancing). 40 Ar/ 39 Ar dating of detrital muscovite reveals contrasting cooling histories for the Paleozoic basement of Triassic rift sub‐basins, indicating that NW‐striking crustal structures segmented the Andean forearc since at least the middle Permian, likely related to an accretional fabric developed along SW Gondwana. These structures can be inferred based on scattered faults, gravimetric data, and basement age disruptions. During the Late Triassic, NS‐striking master faults and secondary NW‐ to NNW‐striking faults configured an oblique rift, primarily driven by subduction dynamics. We suggest that along SW Gondwana, the slab‐pull would have controlled the development of subduction‐related rift basins close to the trench whereas Triassic inland rifts were mainly driven by Pangea‐breakup stresses. Compressional tectonics began in the Late Cretaceous, yet the inversion of the Triassic rift would have started during the Eocene with the inception of the metallogenic‐fertile transpressional Domeyko fault system. Thus, the structural style of this range was determined by the architecture of the Triassic rift, where the inversion of deep‐seated faults accounted for west‐vergent thick‐ and thin‐skinned structures. Pre‐Andean NW‐striking structures also accommodated tectonic rotations during the Incaic orogeny (Eocene‐Oligocene) and may delimit the rupture zone of large earthquakes, suggesting an underestimated role of such ancient discontinuities in Andean neotectonics.

Tectonics↗

USGS2010

Paleozoic ophiolitic assemblages within the southern New England orogen of eastern Australia: Implications for growth of the Gondwana margin

Several ophiolitic assemblages occur in the southern New England orogen. The development of these rocks and their relations to the rest of the orogen have major implications for the tectonic evolution of eastern Gondwana. A major, narrow but elongate belt of Early Cambrian suprasubduction zone ophiolite crops out along and near the PeelManning Fault System and is juxtaposed against younger arc and subduction complex terranes. No pre-Permian links with the rest of the New England orogen have been established for this terrane. It may represent portions of Lachlan Fold Belt basement which underlies younger, westward overthrust New England terranes, and has been diapirically emplaced at higher crustal levels as serpentinite-matrix melange. Middle to Late Devonian ophiolitic rocks in the Yarras Complex comprise basement to the Birpai subterrane and represent a crustal cross section through a rifted island arc. Correlatives of this terrane also occur within the more extensive Gamilaroi terrane to the west of which deeper crustal levels are not exposed. The various components of serpentinite-matrix melange in the Ngamba terrane at Port Macquarie superficially appear to represent a dismembered ophiolite association. However, the various components of the melange exhibit a wide range of ages, metamorphism, and tectonic affinities, rendering a genetically related origin unlikely. This terrane includes fragments of ocean floor accreted into a Late Devonian subduction complex, which was later affected by Early Carboniferous forearc serpentinite diapirism and high Mg series magmatism. Zircon inheritance in Triassic dikes, which intrude the melange attest to the development or later emplacement of this forearc region over an older Lachlan Fold Belt basement. Ultramafic rocks of the Bundjalung terrane in the east of the New England region probably formed at deep levels in an intraoceanic island arc and are intruded by boninitic dikes. The tectonic development of the NEO was significantly more complicated than has been suggested in earlier published models. Periodic accretion of island arc systems, some of which are now represented by suprasubduction zone ophiolites, to the eastern margin of Gondwana suggests multiple phases of subduction with the possibility of polarity reversals throughout the history of accretion. Lateral accretion was not the only means by which Gondwana continental crust grew, and there was considerable postaccretion continentward overthrusting of younger terranes.

New South Wales↗

USGS2017

Magnetotelluric imaging of lower crustal melt and lithospheric hydration in the Rocky Mountain Front transition zone, Colorado, USA

We present an electrical resistivity model of the crust and upper mantle from two‐dimensional (2‐D) anisotropic inversion of magnetotelluric data collected along a 450 km transect of the Rio Grande rift, southern Rocky Mountains, and High Plains in Colorado, USA. Our model provides a window into the modern‐day lithosphere beneath the Rocky Mountain Front to depths in excess of 150 km. Two key features of the 2‐D resistivity model are (1) a broad zone (~200 km wide) of enhanced electrical conductivity (<20 Ωm) in the midcrust to lower crust that is centered beneath the highest elevations of the southern Rocky Mountains and (2) hydrated lithospheric mantle beneath the Great Plains with water content in excess of 100 ppm. We interpret the high conductivity region of the lower crust as a zone of partially molten basalt and associated deep‐crustal fluids that is the result of recent (less than 10 Ma) tectonic activity in the region. The recent supply of volatiles and/or heat to the base of the crust in the late Cenozoic implies that modern‐day tectonic activity in the western United States extends to at least the western margin of the Great Plains. The transition from conductive to resistive upper mantle is caused by a gradient in lithospheric modification, likely including hydration of nominally anhydrous minerals, with maximum hydration occurring beneath the Rocky Mountain Front. This lithospheric “hydration front” has implications for the tectonic evolution of the continental interior and the mechanisms by which water infiltrates the lithosphere.

Colorado↗

USGS1998

Europa: Initial Galileo Geological Observations

Images of Europa from the Galileo spacecraft show a surface with a complex history involving tectonic deformation, impact cratering, and possible emplacement of ice-rich materials and perhaps liquids on the surface. Differences in impact crater distributions suggest that some areas have been resurfaced more recently than others; Europa could experience current cryovolcanic and tectonic activity. Global-scale patterns of tectonic features suggest deformation resulting from non-synchronous rotation of Europa around Jupiter. Some regions of the lithosphere have been fractured, with icy plates separated and rotated into new positions. The dimensions of these plates suggest that the depth to liquid or mobile ice was only a few kilometers at the time of disruption. Some surfaces have also been upwarped, possibly by diapirs, cryomagmatic intrusions, or convective upwelling. In some places, this deformation has led to the development of chaotic terrain in which surface material has collapsed and/or been eroded. ?? 1998 Academic Press.

Icarus↗

USGS1976

Equilibrium-disequilibrium relations in the Monte Rosa Granite, Western Alps: Petrological, Rb-Sr and stable isotope data

Nine samples from the Monte Rosa Granite have been investigated by microscopic, X-ray, wet chemical, electron microprobe, stable isotope and Rb-Sr and K-Ar methods. Two mineral assemblages have been distinguished by optical methods and dated as Permian and mid-Tertiary by means of Rb-Sr age determinations. The Permian assemblage comprises quartz, orthoclase, oligoclase, biotite, and muscovite whereas the Alpine assemblage comprises quartz, microcline, albite+epidote or oligoclase, biotite, and phengite. Disequilibrium between the Permian and Alpine mineral assemblages is documented by the following facts: (i) Two texturally distinguishable generations of white K-mica are 2 M muscovite (Si=3.1–3.2) and 2 M or 3 T phengite (Si=3.3–3.4). Five muscovites show Permian Rb-Sr ages and oxygen isotope fractionations indicating temperatures between 520 and 560 ° C; however, K-Ar ages are mixed or rejuvenated. Phengite always shows mid-Tertiary Rb-Sr ages, (ii) Two biotite generations can be recognized, although textural evidence is often ambiguous. Three out of four texturally old biotites show mid-Tertiary Rb-Sr cooling ages while the oxygen isotopic fractionations point to Permian, mixed or Alpine temperatures, (iii) Comparison of radiogenic and stable isotope relations indicates that the radiogenic isotopes in the interlayer positions of the micas were mobilized during Alpine time without recrystallization, that is, without breaking Al-O or Si-O bonds. High Ti contents in young muscovites and biotites also indicate that the octahedral (and tetrahedral) sites remained undisturbed during rejuvenation. (iv) “Isotopic reversals” in the order of O 18 enrichment between K-feldspar and albite exist. Arguments for equilibrium during Permian time are meagre because of Alpine overprinting effects. Texturally old muscovites show high temperatures and Permian Rb-Sr ages in concordancy with Rb-Sr whole rock ages. For the tectonically least affected samples, excellent concordance between quartz-muscovite and quartz-biotite “Permian temperatures” implies oxygen isotope equilibrium in Permian time which was undisturbed during Alpine metamorphism. Arguments for equilibrium during the mid-Tertiary metamorphism are as follows: (i) Mid-Tertiary Rb-Sr mineral isochrons of up to six minerals exist, (ii) Oxygen isotope temperatures of coexisting Alpine phengites and biotites are concordant. The major factor for the adjustment of the Permian assemblages to Alpine conditions was the degree of Alpine tectonic overprinting rather than the maximum temperatures reached during the mid-Tertiary Alpine metamorphism. The lack of exchange with externally introduced fluid phases in the samples least affected by tectonism indicates that the Monte Rosa Granite “stewed in its own juices”. This seems to be the major cause for the persistence of Permian ages and corresponding temperatures.

Contributions to Mineralogy and Petrology↗

USGS1985

Middle Proterozoic uplift events in the Dunbar dome of northeastern Wisconsin, USA

Isotopic ages of granitic and metamorphic rocks exposed in the Dunbar structural dome of northeastern Wisconsin identify a protracted series of tectonic and "hydrothermal" events that culminated in major regional uplift during Middle Proterozoic (Keweenawan; ca 1,100 Ma) continental rifting and volcanism. The major rock-forming events and the structural development of the dome occurred during the interval 1,862+/-4 Ma to 1,836+/-6 Ma. Whole-rock Rb-Sr ages are partly reset in response to a widely recognized but cryptic event in Wisconsin and Michigan at about 1,630 Ma. The scale and systematic character of the whole-rock resetting strongly suggests the presence of a fluid phase derived in situ from water dissolved in the silicates or externally from a subthrust plate of low-grade metamorphic rocks. The regional nature of the 1,630-Ma disturbance possibly indicates that it is related to a major tectonic event such as an active plate margin far to the south. Rb-Sr biotite ages for the Dunbar dome (this study), the southern complex of the Marquette district (Van Schmus and Woolsey 1975) and the Felch trough area (Aldrich and others 1965) provide a remarkably coherent pattern that reflects multiple episodes of differential uplift. Younger events superimposed on a regional 1,630-Ma imprint are recorded at 1,330 Ma and 1,140 Ma. The 1,330 Ma disturbance could reflect stabilization following intrusion of the Wolf River batholith at 1,485 Ma. The 1,140-Ma uplift event occurred during Keweenawan rifting and volcanism as a result of stresses imposed on a mosaic of fault-bounded blocks with possible subcrustal influence. The remarkably small variance in the 1,140-Ma biotite age peak argues for rapid uplift and cooling, and hence rapid erosion. Detritus from the uplift probably was being shed into nearby tectonic basins most of which did not survive subsequent uplift and erosion. ?? 1985 Springer-Verlag.

Contributions to Mineralogy and Petrology↗

USGS1992

ALVIN investigation of an active propagating rift system, Galapagos 95.5° W

ALVIN investigations have defined the fine-scale structural and volcanic patterns produced by active rift and spreading center propagation and failure near 95.5° W on the Galapagos spreading center. Behind the initial lithospheric rifting, which is propagating nearly due west at about 50 km m.y. −1 , a triangular block of preexisting lithosphere is being stretched and fractured, with some recent volcanism along curving fissures. A well-organized seafloor spreading center, an extensively faulted and fissured volcanic ridge, develops ~ 10 km (~ 200,000 years) behind the tectonic rift tip. Regional variations in the chemical compositions of the youngest lavas collected during this program contrast with those encompassing the entire 3 m.y. of propagation history for this region. A maximum in degree of magmatic differentiation occurs about 9 km behind the propagating rift tip, in a region of diffuse rifting. The propagating spreading center shows a gentle gradient in magmatic differentiation culminating at the SW-curving spreading center tip. Except for the doomed rift, which is in a constructional phase, tectonic activity also dominates over volcanic activity along the failing spreading system. In contrast to the propagating rift, failing rift lavas show a highly restricted range of compositions consistent with derivation from a declining upwelling zone accompanying rift failure. The lithosphere transferred from the Cocos to the Nazca plate by this propagator is extensively faulted and characterized by ubiquitous talus in one of the most tectonically disrupted areas of seafloor known. The pseudofault scarps, where the preexisting lithosphere was rifted apart, appear to include both normal and propagator lavas and are thus more lithologically complex than previously thought. Biological communities, probably vestimentiferan tubeworms, occur near the top of the outer pseudofault scarp, although no hydrothermal venting was observed.

Marine Geophysical Research↗

USGS2017

Volcano geodesy in the Cascade arc, USA

Experience during historical time throughout the Cascade arc and the lack of deep-seated deformation prior to the two most recent eruptions of Mount St. Helens might lead one to infer that Cascade volcanoes are generally quiescent and, specifically, show no signs of geodetic change until they are about to erupt. Several decades of geodetic data, however, tell a different story. Ground- and space-based deformation studies have identified surface displacements at five of the 13 major Cascade arc volcanoes that lie in the USA (Mount Baker, Mount St. Helens, South Sister, Medicine Lake, and Lassen volcanic center). No deformation has been detected at five volcanoes (Mount Rainier, Mount Hood, Newberry Volcano, Crater Lake, and Mount Shasta), and there are not sufficient data at the remaining three (Glacier Peak, Mount Adams, and Mount Jefferson) for a rigorous assessment. In addition, gravity change has been measured at two of the three locations where surveys have been repeated (Mount St. Helens and Mount Baker show changes, while South Sister does not). Broad deformation patterns associated with heavily forested and ice-clad Cascade volcanoes are generally characterized by low displacement rates, in the range of millimeters to a few centimeters per year, and are overprinted by larger tectonic motions of several centimeters per year. Continuous GPS is therefore the best means of tracking temporal changes in deformation of Cascade volcanoes and also for characterizing tectonic signals so that they may be distinguished from volcanic sources. Better spatial resolution of volcano deformation can be obtained through the use of campaign GPS, semipermanent GPS, and interferometric synthetic aperture radar observations, which leverage the accumulation of displacements over time to improve signal to noise. Deformation source mechanisms in the Cascades are diverse and include magma accumulation and withdrawal, post-emplacement cooling of recent volcanic deposits, magmatic-tectonic interactions, and loss of volatiles plus densification of magma. The Cascade Range thus offers an outstanding opportunity for investigating a wide range of volcanic processes. Indeed, there may be areas of geodetic change that have yet to be discovered, and there is good potential for addressing a number of important questions about how arc volcanoes work before, during, and after eruptions by continuing geodetic research in the Cascade Range.

Cascade Arc↗

USGS1980

Grooved terrain on Ganymede

The icy crust of Ganymede comprises bright and dark areas. Investigation of Voyager 1 and 2 images has shown that bright terrain is grooved and separates dark polygons of cratered terrain. The grooved terrain contains alternating ridges and grooves in straight and curvilinear sets, which are locally interrupted by smooth patches and swaths. Cratered terrain, where 'it occurs in small wedges and slivers, has a pervasive grain of narrowly spaced furrows, and thus is transitional to grooved terrain. An analysis of the morphology of terrain types, and of superposition and cross-cutting relations, suggests that grooved terrain grew at the expense of cratered terrain, that tracts of cratered terrain were converted into grooved terrain in situ , and that vertical tectonism and shear movements dominated in the restructuring of Ganymede's surface. It is postulated that during a period in the planet's history when the lithosphere was thin, upwelling convection currents caused incipient rifting accompanied by intensive normal faulting; where rifting went to completion, crustal segments separated, locally spread apart, and sheared past one another. In places subduction and compression may have occurred, but the evidence is inconclusive. Thus, the grooved terrain on Ganymede may record an early phase of ice-plate tectonics that caused rifting and drifting of the icy lithosphere, but, unlike silicate plate tectonics on Earth, may have resulted in only minor vertical turnover.

Icarus↗

USGS1993

Neogene folding and faulting in southern Monterey Bay, Central California, USA

The goal of this study was to determine the Neogene structural history of southern Monterey Bay by mapping and correlating the shallow tectonic structures with previously identified deeper occurring structures. Side scan sonographs and Uniboom seismic reflection profiles collected in the region suggest that deformation associated with both compressional and transcurrent movement is occurring. Strike-slip movement between the North American and Pacific plates started as subduction ceased 21 Ma, creating the San Andreas fault system. Clockwise rotation of the Pacific plate occurred between 3.4 and 3.9 Ma causing orthogonal convergence between the two plates. This plate rotation is responsible for compressional Neogene structures along the central California coast. Structures exhibit transpressional tectonic characteristics such as thrust faulting, reverse faulting and asymmetrical folding. Folding and faulting are confined to middle Miocene and younger strata. Shallow Mesozoic granitic basement rocks either crop out or lie near the surface in most of the region and form a possible décollement along which the Miocene Monterey Formation has decoupled and been folded. Over 50% of the shallow faults strike normal (NE-SW) to the previously identified faults. Wrench fault tectonics complicated by compression, gradual uplift of the basement rocks, and a change in plate convergence direction are responsible for the observed structures in southern Monterey Bay.

Marine Geology↗

USGS1969

On the global variations of terrestrial heat-flow

Over 3 500 measurements of surface heat-flux have been catalogued and analyzed to study the large-scale variations of terrestrial heat-flow. It was found that heat-flow values are correlated with major geologic provinces: higher averages and scattered values in active tectonic regions, and lower averages and more uniform values in stable areas. Analyzing the data in the light of new global tectonics shows that the variations of heat-flow are consistent with the hypotheses of sea-floor spreading and plate tectonics. The observed heat-flow across the mid-oceanic ridges can be accounted for by a simple model of a spreading sea floor.

Physics of the Earth and Planetary Interiors↗

USGS1981

Gravitational potential as a source of earthquake energy

Some degree of tectonic stress within the earth originates from gravity acting upon density structures. The work performed by this "gravitational tectonics stress" must have formerly existed as gravitational potential energy contained in the stress-causing density structure. According to the elastic rebound theory (Reid, 1910), the energy of earthquakes comes from an elastic strain field built up by fairly continuous elastic deformation in the period between events. For earthquakes resulting from gravitational tectonic stress, the elastic rebound theory requires the transfer of energy from the gravitational potential of the density structures into an elastic strain field prior to the event. An alternate theory involves partial gravitational collapse of the stress-causing density structures. The earthquake energy comes directly from a net decrease in gravitational potential energy. The gravitational potential energy released at the time of the earthquake is split between the energy released by the earthquake, including work done in the fault zone and an increase in stored elastic strain energy. The stress associated with this elastic strain field should oppose further fault slip.

Alaska↗

USGS1989

Dikes, joints, and faults in the upper mantle

Three different types of macroscopic fractures are recognized in upper-mantle and lower-crustal xenoliths in volcanic rocks from around the world: 1. (1) joints that are tensile fractures not occupied by crystallized magma products 2. (2) dikes that are tensile fractures occupied by mafic magmas crystallized to pyroxenites, gabbros or hydrous-mineral-rich rocks, 3. (3) faults that are unfilled shear fractures with surface markings indicative of shear displacement. In addition to intra-xenolith fractures, xenoliths commonly have polygonal or faceted shapes that represent fractures exploited during incorporation of the xenoliths into the host magma that brought them to the surface. The various types of fractures are considered to have formed in response to the pressures associated with magmatic fluids and to the ambient tectonic stress field. The presence of fracture sets and crosscutting relations indicate that both magma-filled and unfilled fractures can be contemporaneous and that the local stress field can change with time, leading to repeated episodes of fracture. These observations give insight into the nature of deep fracture processes and the importance of fluid-peridotite interactions in the mantle. We suggest that unfilled fractures were opened by volatile fluids exsolved from ascending magmas to the tops of growing dikes. These volatile fluids are important because they are of low viscosity and can rapidly transmit fluid pressure to dike and fault tips and because they lower the energy and tectonic stresses required to extend macroscopic cracks and to allow sliding on pre-existing fractures. Mantle seismicity at depths of 20-65 km beneath active volcanic centers in Hawaii corresponds to the depth interval where CO2-rich fluids are expected to be liberated from ascending basaltic magmas, suggesting that such fluids play an important role in facilitating earthquake instabilities in the presence of tectonic stresses. Other phenomena related to the fractures include permeation of peridotite by fluid inclusions derived by degassing of magmas, partial melting of peridotite and dike rocks, and metasomatic alteration of peridotite host rock by magmas emplaced in fractures. These effects of magmatism generally reduce the bulk density of peridotite and might also reduce seismic velocities. The velocity contrasts between fractured and unfractured peridotite might be detected by seismic-velocity profiling techniques.

Tectonophysics↗

USGS1989

Geology of the Zambales ophiolite, Luzon, Philippines

The Zambales ophiolite of western Luzon, Philippines, exposes a typical succession of basalt flows, diabasic dikes, gabbro and tectonized harzburgite. The age established by limiting strata is late Eocene. Lack of evidence of thrust faulting and the general domal disposition of the lithologie units indicate that the ophiolitic rocks are exposed by uplift. Highly complex internal layered structures within the complex are related to processes developed during formation of the ophiolite and the Zambales ophiolite may be one of the least disturbed (by emplacement) ophiolitic masses known. The exposed mass trends north and the upper surface plunges at low angles (a few degrees) to the north and south. The chemistry and composition of the rocks in the northwest part of the Zambales area (Acoje block) is distinct from that in the southeastern segment (Coto block). The Acoje block, according to Evans (1983) and Hawkins and Evans (1983), resembles (on a chemical basis) arc-tholeiite series rocks from intra-island arcs and the rocks in the Coto block are typical back-arc basin rock series. The present writer believes that the ophiolite composes a single genetic unit and that the changes in composition are the result of changes that took place during the initial formation. The gabbro probably formed below a spreading center in an elongate, in cross section, V-shaped, magma chamber. The gabbro is estimated by the writer to be less than 2 km thick and may be less than 1 km in places. Numerous erosional windows through the gabbro in the northern and eastern side of the Zambales area show that the gabbro remaining in those areas is likely to be only a few hundred meters thick. Harzburgite is exposed to a depth of about 800 m in the Bagsit River area and this may be the deepest part of the ophiolite accessible for study on which there is any control on depth. A transitional zone, about 200 m thick lying between the gabbro and harzburgite, is composed of serpentinized dunite. Commonly the dunite contains disseminated sulfide minerals and at the Acoje Mines, platinum-group elements. A compositional layering within the gabbro is in places cumulate in the lower part of the unit but may have formed by nucleation higher up on the relatively steep sides of the magma chamber. A widespread gneissic banding in the gabbro forms large mappable structures which are many times more complex than is the disposition of the major rock units. These structures are believed to be the result of extensive slumping in the magma chamber. The structure produced by the cumulate layering merges with the gneissic banding, commonly without discernible change in attitude. This tectonic layered structure crosses the gabbro-peridotite boundary at any angle without seeming to disturb the original rock distribution. At greater depths below the boundary (ca. 800 m), the harzburgite contains low dipping banding, which probably reflects the result of differential movement within the mantle. Chromite occurs almost exclusively in a zone that generally lies no more than 200–300 m below the gabbro-peridotite boundary. Refractory-grade chromite is found in this zone below the olivine gabbro in the Goto block and as low-grade metallurgical grade chromite below norite in the Acoje block. At Acoje Mines the chromite is present in layers in dunite, which the writer interprets as being distributed in a zone along the gently dipping (ca. 25°) gabbro-peridotite boundary. The steeply dipping (ca. 60–80 ° ) individual layers lie en echelon along the boundary at an angle (ca. 50 ° ) to the contact. At Coto the chromite forms large discontinuous masses in the lowest dunite and in the uppermost harzburgite. Except for the chromite present as layers at Acoje, the regional tectonic layering crosses the chromite deposits without structural deviation. The chromite deposits and associated peridotite may be cumulate in origin, but have been modified to such an extent that cumulate textures are generally obliterated. The angle of repose of cumulate layers in the Acoje area and in the Coto block dip towards each other raising the possibility that the Zambales area may contain the relics of a spreading center. Initial emplacement of the Zambales ophiolite took place by uplift and the ultramafic portion was exposed to erosion in the earliest Miocene or late Oligocene. Submergence of some of the ophiolite followed the previous uplift and on the west side of the Zambales Range submergence of several kilometers is indicated. Final emergence appears to have taken place in Pliocene or Pleistocene time by block uplift and areas of greatest uplift closely conform to the present topographic surface.

Tectonophysics↗

USGS1990

Role of heat and detachment in continental extension as viewed from the eastern basin and range province in Arizona

The Bill Williams River area of west-central Arizona includes not only the Rawhide-Buckskin metamorphic core complex, which is part of the lower Colorado River highly extended terrane (HET), but also the boundary between the extended terranes of the Basin and Range Province and the less deformed Arizona Transition Zone/Colorado Plateau. This provides important constraints on models that address the mechanisms for the mid- to late Tertiary deformation. Three phases of extension are present. The oldest is the extension associated with core-complex tectonism, which characteristically shows a lower plate composed of lineated mylonitic gneiss overlain by a detachment fault that is regionally nearly horizontal but undulates at the local scale. The fault in turn is overlain by an upper plate that includes Precambrian basement rocks, recrystallized Paleozoic sedimentary rocks, Mesozoic(?) metasedimentary and metavolcanic rocks of greenschist facies, and unaltered to hydrothermally altered syntectonic sedimentary and volcanic rocks of Miocene age. The upper plate is cut by closely spaced faults of modest structural relief that strike northwest and strongly rotate intervening blocks to face southwest. Most of these faults do not penetrate below the detachment fault. Fault spacing increases, and rotation decreases, to the northeast, away from the trace of the detachment. The second phase consists of “classic” Basin-Range high-angle normal faults that strike about north and have wide spacing, high structural relief, and modest rotation of blocks. These faults have no consistent direction of displacement and so produced horst and graben that form the ranges and basins visible today. This phase is locally superposed on Phase I, and also extends in more subdued form into the Transition Zone/Colorado Plateau. The third phase consists of tectonic quiescence and is present everywhere except parts of the Transition Zone that are still active seismically. The first phase occurred in the early and middle Miocene and was accompanied by deposition of syntectonic fluviolacustrine rocks (Suite I); the second (middle to late Miocene) was marked by interior-basin deposits (Suite II); the third (latest Miocene through Quaternary) is characterized by deposits related to through-flowing drainage. The phases grade into each other and thus are likely to be genetically related. Tectonic models must take into account not only the geographic distribution of deformation at any one time but also the time-dependent succession of deformation at any one place. A model proposed in this paper attempts to do this. The model is thermotectonic. A heating event in the lower crust, (basaltic intrusion, asthenospheric upwelling) combined with stretching, causes a sharp thermal front to rise within the crust. Embedded within the front is an “isotherm” that marks the brittle-ductile transition. As the front rises, it leaves behind a trail of shear zones, each marking a locus of preferred failure defined by mechanical or physical properties, or combinations thereof. The highest shear zone, now preserved in fossil form as the “detachment”, occurs where the front impinges on the meteoric groundwater, a few km below the topographic surface. The water steepens the thermal gradient at the front, which it stabilizes. A convective hydrothermal circulation system is established, causing alteration and mineralization above the ductile-brittle transition, as well as pore overpressure that results in hydrofracturing (producing monolithologic breccias) and the sliding of gravity-glide sheets. During these events, extension is taking place by brittle failure in the upper plate and ductile deformation below the detachment. Simultaneously, the hottest areas (core complexes) are updomed, promoting drainage reversals and the sliding of breccias and glide sheets. All this occurred only in the hottest areas or “blisters”, now marked by the core complexes. Distal areas showed less or no deformation at the surface. With time and the waning of the thermal event, the thermal front, and thus the brittle-ductile transition, smoothed out and sank, again leaving a trail of shear zones. Phase 1 deformation ceased and was replaced by Phase 2 deformation that occurred over a much wider area. Eventually, the front sank so deep that surface deformation ceased. This illustrates how the style of deformation at the surface may be a measure of the depth to the brittle-ductile transition. According to the thermotectonic model, extensional strain does not need to be constant along the detachment, in contrast to models involving simple shear through crustal-scale normal faults. On the contrary, one would expect strain to vary geographically as a function of maximum temperature attained, because of the well known relation between temperature and lithospheric strength. The thermotectonic model is also in good accord with geophysical characteristics of the Basin and Range Province, which suggests that extension was accompanied by intrusion of basalt into the lower crust, with consequent heating and anatexis. Many studies in the U.S. and elsewhere support the model by showing that continental extension commonly is accompanied by near-surface temperatures corresponding to the brittle-ductile transition, by steep thermal gradients, and by hydrothemal convective systems. A possible driving mechanism from the thermotectonic processes described by the model is the rise of asthenospheric domes or welts, which thin the lithosphere by subcrustal transfer while heating and stretching it. An asthenospheric welt that migrates northeastward while dying out might explain the encroachment of relatively subdued extension onto the Colorado Plateau, as well as the juxtaposition of compressive stress on the plateau with extensional stress in the adjacent Transition Zone and Basin and Range Province.

Arizona↗

USGS1989

Hydrocarbon gas seeps of the convergent Hikurangi margin, North Island, New Zealand

Two hydrocarbon gas seeps, located about 13 km apart, have distinctive molecular and isotopic compositions. These seeps occur within separate tectonic melange units of narrow parallel trending and structurally complex zones with incorporated upper Cretaceous and Palaeogene passive continental margin deposits which are now compressively deformed and imbricated along the convergent Hikurangi margin of North Island, New Zealand. At Brookby Station within the Coastal High, the seeping hydrocarbon gas has a methane/ethane ratio of 48 and ??13C and ??D values of methane of -45.7 and -188???, respectively (relative to the PDB and SMOW standards). Within the complex core of the Elsthorpe Anticline at Campbell Station seep, gas has a methane/ethane ratio of about 12000, and the methane has ??13C and ??D values of -37.4 and -170???, respectively. The source of the gases cannot be positively identified, but the gases probably originate from the thermal decomposition of organic matter in tectonically disturbed upper Cretaceous and/or lower Tertiary sedimentary rocks of passive margin affinity and reach the surface by migration along thrust faults associated with tectonic melange. The geochemical differences between the two gases may result from differences in burial depths of similar source sediment. ?? 1989.

Marine and Petroleum Geology↗