USGS ScienceSearch

SEARCH · USGS Science

Results for “River Research and Applications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 62Linked to original sources

Validating antler- and movement-based estimates of caribou reproduction using video camera collars

Wildlife agencies invest substantial resources in monitoring ungulate reproductive rates given ongoing concerns about population trends and their implications for management. For barren-ground caribou ( Rangifer tarandus ) in the North American Arctic, data on parturition and neonate survival have traditionally been collected using visual observations of antler retention and calf presence from small, fixed-wing aircraft. However, these surveys are weather-dependent, expensive, and dangerous, motivating the development of movement-based approaches that infer reproductive events from global positioning system (GPS) location data. We had the unique opportunity to use video camera collars to validate both antler- and movement-based methods for estimating reproduction in barren-ground caribou, using data from the Porcupine (2018–2023) and Western Arctic (2021, 2023) herds in Alaska, USA, and Yukon, Canada. For the movement-based approaches, we assessed individual-based and population-based methods, which both inferred parturition following a sharp decline in movement and inferred calf loss following a sharp increase in movement. We investigated these approaches using rarified 1-, 2-, 4-, and 8-hour fix intervals. Based on video collar observations, we found that antler retention at the onset of the calving period was highly accurate for predicting parturition (96% accuracy) but became unreliable as calving progressed, as approximately 80% of parturient females shed their antlers during the calving period. In contrast, both movement methods performed marginally for estimating caribou parturition (~70% accuracy), with estimates from the individual-based method exhibiting greater bias than those from the population-based method. The individual-based method also poorly predicted neonate survival (≤49% accuracy for detecting parturition and calf fate for the Porcupine Herd). Video data revealed that inaccuracies with the movement methods often occurred when caribou bedded during storms, rested after traversing mountainous terrain, lost a calf shortly after birth, or increased movement to evade insects. These results have important implications for management agencies using antler- and movement-based methods to estimate caribou reproduction, particularly when informing assessments of population decline or recovery. Our results demonstrate the utility of video collar data for validating reproductive monitoring approaches and provide insights into how these approaches can be improved.

Alaska, Yukon

A cross-site comparison of ecosystem- and plot-scale methane fluxes across multiple sites

Wetland and upland ecosystems play significant but opposing roles in the global methane (CH 4 ) budget, acting as natural sources and sinks, respectively. Two of the most common approaches for measuring CH 4 fluxes (FCH 4 ) are chambers, which measure fluxes at fine spatial scales (ca. 1 m 2 ), and eddy covariance (EC) towers, which integrate fluxes across larger footprints (ca. 100–10 000 m 2 ). Although chamber and EC observations have been combined in various syntheses and databases to estimate CH 4 budgets, a unified cross-site evaluation of FCH 4 estimates at plot and ecosystem scales is lacking. As a first step toward a systematic spatiotemporal scaling of EC tower and chamber footprints, we quantified differences in site-level aggregate FCH 4 between EC and chamber measurements ( Δ FCH 4 ) across ten wetland and upland sites at half-hourly, hourly, daily, weekly, monthly, and annual timescales. We found that ecosystem-scale median FCH 4 was consistently higher than plot-scale FCH 4 at all temporal scales, with the smallest difference at the daily timescale (multi-site median Δ FCH 4 : 1.36 nmol m −2 s −1 ; median ecosystem-scale FCH 4 = 1.56 nmol m −2 s −1 , median plot-scale FCH 4 = 0.06 nmol m −2 s −1 ) and the largest at annual scales (2.58 nmol m −2 s −1 ; median ecosystem-scale FCH 4 = 25.91 nmol m −2 s −1 , median plot-scale FCH 4 = 6.55 nmol m −2 s −1 ). In general, the agreement between ecosystem- and plot-scale FCH 4 decreased with finer temporal resolution (from Spearman ρ = 0.95 at the annual scale to ρ = 0.65 at the half-hourly scale), while Δ FCH 4 variation was greatest at daily-to-annual scales. Key environmental predictors of Δ FCH 4 across the ten sites included plot-scale spatial heterogeneity, dominant vegetation type, vapor pressure deficit, atmospheric pressure, and friction velocity at the daily and monthly scales. Wind direction was a significant predictor only at the monthly scale, suggesting EC footprint effects at these sites. These findings suggest that accounting for variability in EC footprint extent, chamber measurement placement, and measurement artifacts is key to reconciling multi-scale FCH 4 observations across diverse ecosystems and refining CH 4 budgets.

Biogeosciences

Geophysical architecture and geochronology of the Neoarchean Mentor anorthosite intrusive complex, northwestern Minnesota: Largest anorthosite complex of the Superior Province?

The Neoarchean Mentor anorthosite intrusive complex (MAIC) lies within the Wawa subprovince in northwestern Minnesota, in a region where the Wawa, Quetico, and Wabigoon subprovinces are juxtaposed in close proximity. Archean rocks are entirely concealed, and interpretations are developed from aeromagnetic, gravity, and borehole samples. The MAIC includes both anorthosite (dense, weakly magnetized) and oxide-rich gabbro (strongly magnetized) lithologies. Anorthosite is coarse-grained to megacrystic, intensely altered, and locally brecciated. Pervasive epidote alteration enhanced the density of the anorthosite via introduction of higher-density mineral assemblages, explaining why the MAIC produces a significant gravity high. Oxide-rich gabbro forms a border phase of the MAIC and has potential for vanadium, chromium, and titanium mineralization, and produces a strong aeromagnetic high. The MAIC is interpreted to extend over an area of 640 km 2 , making it the largest known anorthosite complex of the Superior Province, as measured by preserved areal extent. Modeling indicates the MAIC extends more than 6 km into the subsurface. A new Pb–Pb zircon age of 2737.2 ± 4.5 Ma is interpretated as the crystallization age of anorthosite within the MAIC, showing that the MAIC formed well before the ca. 2690 Ma Shebandowanian orogeny, and raising new questions about correlations with other parts of the Wawa subprovince. A low-density batholith, here informally called the Fertile batholith, is interpreted to intrude the southern part of the MAIC. A new Pb–Pb zircon age of 2701.1 ± 6 Ma is interpreted as the magmatic age of the Fertile batholith.

Minnesota

Reduction of red bed sedimentary rocks in connection with energy metal ore formation: A case study from the Sinbad seep, Mesa County, Colorado

The Paradox Basin’s Sinbad seep is a modern analog for ancient bleaching of red bed sediments by introduced alkaline, reducing brines. This bleaching, involving reductive alteration of former red beds, is essential ground preparation that enables the altered rocks to trap Cu, U, and V from later oxidized fluids, forming ore deposits. Study of Sinbad thus offers insights into these metallic mineralization processes in the Paradox and other sedimentary basins. The Sinbad seep occurs where shallow groundwater interacts with organic-rich petroleum source rocks, flows up a fault, and discharges into Salt Creek. Ratios of Na/Cl, Na/Br, and Cl/Br, plus high sulfate concentrations, indicate that the salinity of the seep water originated from dissolution of halite and gypsum during topographically driven flow of meteoric water across a diapir of the Pennsylvanian Paradox Formation, rather than from deep basinal brines. In contact with the organic-rich shales of the Paradox, these SO 4 -rich waters become reduced through bacterial reduction, producing H 2 S. The waters react with red beds of the Permian Cutler Formation, causing pervasive bleaching. The bleaching at Sinbad is characterized by iron-conservative reduction of ferric iron in diagenetic hematite and detrital ilmenite and magnetite to Fe sulfides. The ferrous iron is retained in these sulfides likely as sorbed Fe. Associated alteration includes precipitation of quartz and feldspar overgrowths, partial dissolution of detrital quartz and feldspar caused by pressure solution, formation of clay and authigenic rutile, and precipitation of carbonate and gypsum. The Fe sulfides rapidly degenerate to a mixture of jarosite and iron oxides on weathering at the surface. Among the major-oxide elements and most trace elements, there is no statistical difference between unbleached and bleached samples. The exceptions are uranium and sulfur, which are somewhat greater in bleached samples. Fission track radiography illuminates that uranium is preferentially concentrated in iron oxide cements, iron sorbed into detrital clasts, and finely disseminated iron oxide in illite cement in bleached samples. A leaching experiment suggests that uranium may be more easily available for mobilization from rocks that have undergone bleaching alteration, making them potential U sources. In addition, bleached rocks form effective traps for U, V, and some Cu mineralization.

Colorado

The projected exposure and response of a natural barrier island system to climate-driven coastal hazards

Accelerating sea level rise (SLR) and changing storm patterns will increasingly expose barrier islands to coastal hazards, including flooding, erosion, and rising groundwater tables. We assess the exposure of Cape Lookout National Seashore, a barrier island system in North Carolina (USA), to projected SLR and storm hazards over the twenty-first century. We estimate that with 0.5 m of SLR, 47% of current subaerial barrier island area would be flooded daily, and the 1-year return period storm would flood 74%. For 20-year return period storms, over 85% is projected to be flooded for any SLR. The modelled groundwater table is already shallow (< 2 m deep), and while projected to shoal to the land surface with SLR, marine flooding is projected to overtake areas with emergent groundwater. Projected shoreline retreat reaches an average of 178 m with 1 m of SLR and no interventions, which is over 60% of the current island width at narrower locations. Compounding these hazards is subsidence, with one-third of the study area currently lowering at > 2 mm/yr. Our results demonstrate the difficulty of managing natural barrier systems such as those managed by federal park systems tasked with maintaining natural ecosystems and protecting cultural resources.

North Carolina

Integrity of production wells and confining unit at the Naval Weapons Industrial Reserve Plant, Dallas, Texas, 1995

Ground water in the shallow alluvial aquifer is contaminated at the Naval Weapons Industrial Reserve Plant, Dallas, Texas. Five production wells at the site are cased through the alluvial aquifer and underlying units and are screened in either the Paluxy or Twin Mountains aquifers. Three abandoned wells, originally completed in the Twin Mountains aquifer but filled with drilling mud in 1958, also penetrate the alluvial aquifer. The Paluxy and Twin Mountains aquifers are used for drinking-water supplies in and around the Dallas-Fort Worth metroplex. Trichloroethylene and its degradation products, dichloroethylene and vinyl chloride, and the metal chromium previously have been detected in the shallow alluvial aquifer. Current (1995) analyses of water-quality samples taken from the static water column of the five production wells and one of the abandoned wells indicate no trichloroethylene, dichloroethylene, or vinyl chloride in the water column of these wells. Chromium was detected in all samples, but concentrations were less than the practical quantitation limit, which is the regulatory action level for this site. The results of borehole geophysical log analysis indicate that two of the production wells could have vertically connected intervals where cement bonding in the well annulus is poor. The other production wells have overall good bonding. Temperature logs do not indicate flow behind casing except in the screened interval of one well. Geophysical logs show the Eagle Ford Shale ranges from 147 to 185 feet thick at the site. The Eagle Ford Shale has low permeability and a high plasticity index. These physical characteristics make the Eagle Ford Shale an excellent confining unit.

Texas

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California

High‐resolution surface deformation and slip distribution observations for the 2023 Kahramanmaraş, Türkiye, earthquake sequence help constrain the rupture process

Splay, or branch, faults are a common geometric feature of earthquake surface ruptures and may provide constraints on the rupture behavior of an earthquake. The 2023 M w 7.8 Pazarcık and M w 7.5 Elbistan, Türkiye, earthquakes are examples of ruptures with multiple small splays, and the Pazarcık earthquake nucleated on a splay fault, the Narlı fault, before rupturing bilaterally on the East Anatolian fault (EAF). Here, we present 3‐m‐resolution surface displacement from subpixel correlation of Planet Dove optical images for the entirety of both ruptures with corresponding surface slip distributions. For a 30‐km‐long study region spanning the Narlı‐EAF intersection, we compare surface slip derived from five data sets with different resolutions (on‐the‐ground, WorldView, Planet Dove, Sentinel‐2, and Sentinel‐1) to elucidate complementary information. In addition, we integrate information from the surface expression of faulting with published dynamic rupture simulations and rupture process studies to constrain a rupture evolution for the Pazarcık earthquake that is consistent across data sets. This work highlights the complementary nature of disparate surface slip data sets and the role that high‐resolution surface displacement information, including from fault splays, can play in constraining nonunique rupture models and refining understanding of the earthquake rupture process.

Bulletin of the Seismological Society of America

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv

Widespread landslide activity in an extreme wet season and implications for regional sediment management, eastern San Francisco Bay area, California

Watershed sediment production is expected to increase in a warmer future with more extreme rain, with cascading effects throughout drainage and sediment-transport networks. This study investigated landscape-scale sediment movement in the eastern San Francisco Bay area, California, USA, during the extreme 2016–2017 wet season that brought major rainfall, landslides, and flooding. Mapping 8,928 landslides across a 1,050-km 2 study area revealed new sediment yield of 510–956 t/km 2 , equivalent to denudation of 193–361 mm/ky. These results correspond closely to long-term denudation rates in the northern and central California Coast Ranges, indicating that mass wasting in very wet years dominates long-term sediment mobilization. However, due to long residence times in drainage networks, the 2017 landslides contributed at most ∼1%–2% of the estimated locally derived fluvial sediment transport to San Francisco Bay. Although the amount of sediment mobilized did not threaten municipal water supplies, small rangeland impoundments in this mixed-use landscape lost storage capacity to new sedimentation. Considering regional sediment supply and demand, even the exceptionally large sediment delivery in an extreme wet year cannot meet the need for sediment to accrete tidal wetlands in the bay. To keep pace with rising sea levels, this abnormally high terrestrial sediment input would need to occur in 50 of the next 75 years, an unlikely occurrence due to the prevalence of recent drought years. Shoreline protection and restoration in the bay would need additional sources of sediment, such as through management of dredged sediment through beneficial-reuse programs.

California

Latitudinal gradients of snow contamination in the Rocky Mountains associated with anthropogenic sources

Seasonal snow is an important source of drinking water and recreation, and for agriculture in the Rocky Mountain region. Monitoring snow-water quality can inform on the effects to the albedo and energy balance of the snowpack, and the sources of natural and anthropogenic aerosol and gases. This study analyzed metals in the seasonal snowpack from water year (WY) 2018 for 49 sites. Calcium, lanthanum, and cerium concentrations support the importance of mineral dust to the southern Rocky Mountains. Mercury (Hg), zinc (Zn), and cadmium (Cd) concentrations showed a similar spatial pattern to mineral dust, whereas antimony (Sb) concentrations were highest in the northern Rocky Mountains. To assess the relative contributions from dust versus anthropogenic contaminant sources, enrichment factors (EF) were calculated, with values above 10 indicating anthropogenic contamination. For Cd, Hg, Sb, and Zn, EF values exceeded 10 at northern sites. These observations were compared to spatial trends of EF values of Hg from WY2009 to WY2018, regional monitoring networks, and back trajectory analyses. The agreement between these datasets revealed temporally consistent contaminant sources and/or transport processes to the northern Rocky Mountains snowpack. Sources include current and historical mining and smelting in the region. Strategies to limit the emissions of these metals to the Northern Rockies could benefit from focusing on remediation of contaminated sites, and continued monitoring and mitigation of active mining and smelting.

Colorado , Idaho, Montana, New Mexico, Utah, Wyomi

Geochemistry and Soils of the Big Smoky Valley Fens, Nevada

Fens are groundwater-fed wetlands that can provide habitat for plants and animals. Due to anthropogenic activities and climate change, many fens around the world are at risk. This paper presents the results of a study of the hydrology and geochemistry of fens in Big Smoky Valley, central Nevada to support the Bureau of Land Management’s activities in the area. A water sample from the largest fen in the study area was analyzed for its water chemistry and compared to a nearby alluvial aquifer and hot spring. The high SiO 2 concentration of the fen sample implies that the fen water may originate from geothermal water. A soil core was taken to analyze radiocarbon age and soil type. A majority of the core was composed of silt and clay interlayered with water-filled voids. Changes in the character of the clay with depth suggest that there may have been changes in the depositional environment over time. Radiocarbon dating of Ruppia seeds showed longevity of the fen, with the minimum 14 C age of the core as 4,375±40 years. This paper provides reconnaissance-level information on the Big Smoky Valley fens, but further information would be needed to better understand the source of water to the fens or how the fen environment has changed over time with climate.

Nevada

Geologic framework and Holocene sand thickness offshore of Seven Mile Island, New Jersey

The U.S. Geological Survey assessed the Quaternary evolution of Seven Mile Island, New Jersey, to quantify coastal sediment availability, which is crucial for establishing sediment budgets, understanding sediment dispersal, and managing coastlines. This report presents preliminary interpretations of seismic profiles, maps of Holocene sand thickness from the shoreline to 2 kilometers offshore, and tables quantifying the volume of available sediment along the coastal margin based on data collected during 2021 and 2022. The results reveal spatial variability in the thickness and cross-shore extent of Holocene sand. The study area was separated into northern, central, and southern zones by using underlying stratigraphy and geomorphic features. The characteristics and spatial extent of the Holocene sand deposit indicate that hydrodynamic processes contribute to its spatial variability. Northern Seven Mile Island contains the thickest deposits of Holocene sand that were formed by sediment bypass around the Townsends Inlet ebb-tidal delta. Specifically, swash bars have welded to the updrift end of Seven Mile Island and have formed thick deposits of Holocene sand that thicken landward and taper seaward. Despite their thickness, these deposits have the smallest cross-shore extent; therefore, northern Seven Mile Island has the smallest volume of Holocene sand of the three geomorphic zones. Central Seven Mile Island has the thinnest Holocene sand deposits because this section of the barrier island is outside the influence of ebb-tidal deltas. Southern Seven Mile Island has the greatest volumes of Holocene sand because of increased accommodation and deposition adjacent to the Hereford Inlet ebb-tidal delta. Even though tidal inlets exert variable influence on the three geomorphic zones, sediment is distributed fairly uniformly within each geomorphic zone; each of the three zones contains 31.05–36.48 percent of the volume of available Holocene sand.

New Jersey

World minerals outlook—Cobalt, gallium, helium, lithium, magnesium, palladium, platinum, and titanium through 2029

Given the rapid expansion in the demand for mineral commodities that underpin worldwide economic growth and technological advancement, information regarding expected country-level mine production and production capacity is becoming increasingly important to industry stakeholders, end users, and policymakers. Production capacity can limit future supply, depending on how rapidly that capacity is able to expand. Current capacity can be evaluated on the basis of past production. Decreases to future capacity can be taken into account from announcements of planned shutdowns of mines or processing facilities, which are frequently publicized well in advance of such closures. Likewise, capacity expansions, which usually involve multiple stages—such as permitting, financing, and construction (all of which take time)—can also be estimated. As such, it is possible to evaluate midterm future capacity based on estimates of today’s capacities along with consideration of future investment plans. This World Minerals Outlook provides estimated capacities for cobalt, gallium, helium, lithium, magnesium, palladium, platinum, and titanium for 2025 through 2029. The results of this analysis indicate that two mineral commodities important to the manufacture of lithium-ion batteries—cobalt and lithium—are expected to have large capacity growth in the next few years, likely owing to expectations for increased demand for these batteries. For gallium, helium, palladium, and platinum, capacity is expected to remain stable or exhibit moderate growth. Still, these expected capacity levels are higher than current production, allowing for future production growth. The production capacity outlook is opaque for magnesium and titanium metal, which have a significant fraction of current production in nonmarket economies, such as China and Russia. Ultimately, though, where free market conditions prevail, full utilization of capacity potential for those commodities is likely to depend on supply deficits and prices that are above production costs.

Scientific Investigations Report

Quantitative evaluations of earthquake early warning performance using “Did You Feel It?” and post-alert surveys

We examine responses to the U.S. Geological Survey’s “Did You Feel It?” (DYFI) survey and its companion earthquake early warning (EEW) questionnaire to assess the performance of the U.S. ShakeAlert EEW system directly from the alert recipients’ perspectives. ShakeAlert rapidly detects earthquakes and develops alert information, but as official alert delivery partners issue these alerts, it is thus difficult to determine how many people were alerted and when. We investigate DYFI reports for six California earthquakes that had EEW alerts and substantial responses to the DYFI EEW questionnaire. Comparisons of ShakeAlert predictions to reported intensities demonstrate that magnitude estimation accuracy is not necessarily indicative of ground-motion prediction accuracy. Perceived warning time distributions indicate that estimating maximum-expected warning times using the S-wave arrival is a reasonable assumption when discussing public EEW performance. However, we also find many reports of shorter warning times, late alerts, and missed alerts than expected based on ShakeAlert publication times, suggesting alert delivery latencies are substantial and highly variable. The novelty of our analysis is that we demonstrate that the DYFI EEW survey provides useful EEW efficacy information—independent of the specific alerting pathway—that can be used to inform our choices for conveying EEW performance.

California

Surface-wave relocation and characterization of the 2024–2025 dyking episode along the Fentale–Dofen segment of the Ethiopian rift

From late-December 2024 to mid-March 2025, a 50-km-long dyke intrusion triggered over 300 earthquakes (magnitude 4 to 5.9) between Fentale and Dofen volcanoes along the Northern Main Ethiopian Rift. Dyke intrusions periodically occur along the Fentale–Dofen magmatic segment and are an expression of ongoing rift extension. Preliminary analyses using interferometric synthetic aperture radar revealed extensive ground deformation (up to 60 cm), which closely matched the temporal and spatial evolution of surface manifestations and earthquake locations from global catalogues. While global catalogues are critical for real-time monitoring, the precision of locations in remote and or sparsely instrumented regions can be low. In this investigation, we present surface-wave relocation results of the dyking episode that began near Fentale volcano in December 2024. We estimate relative locations using differential traveltimes measured from regional-to-teleseismic distance surface-wave observations of earthquakes reported by the U.S. Geological Survey. Relative relocations reduce the initial region of diffuse seismicity to a 50-km-long narrow band bounding the strike of surface manifestations and the zone of maximum surface deformation. We demonstrate the precision of surface-wave relocations over incremental time periods, capturing the progression of dyking from seismic onset through seismic migration and caldera subsidence. Results showcase the utility of surface-wave relocations in the characterization of dyking episodes and provide complementary insights into the current understanding of the Fentale–Dofen volcanic plumbing system.

Geophysical Journal International

Remote sensing evapotranspiration in ensemble-based framework to enhance cascade routing and re-infiltration concept in integrated hydrological model applied to support decision making

Integrated hydrological models (IHMs) help characterize the complexity of surface–groundwater interactions. The cascade routing and re-infiltration (CRR) concept, recently applied to a MODFLOW 6 IHM, improved conceptualization and simulation of overland flow processes. The CRR controls the transfer of rejected infiltration and groundwater exfiltration from upslope areas to adjacent downslope areas where that water can be evaporated, re-infiltrated back to subsurface, or discharged to streams as direct runoff. The partitioning between these three components is controlled by uncertain parameters that must be estimated. Thus, by quantifying and reducing those uncertainties, next to uncertainties of the other model parameters (e.g. hydraulic and storage parameters), the reliability of the CRR is improved and the IHM is better suited for decision support modelling, the two key objectives of this work. To this end, the remotely sensed MODIS-ET product was incorporated into the calibration process for complementing traditional hydraulic head and streamflow observations. A total of approximately 150,000 observations guided the calibration of a 13-year MODFLOW 6 IHM simulation of the Sardon catchment (Spain) with daily stress periods. The model input uncertainty was represented by grid-cell-scale parameterization, yielding approximately 500,000 unknown input parameters to be conditioned. The calibration was carried out through an iterative ensemble smoother. Incorporating the MODIS-ET data improved the CRR implementation, and reduced uncertainties associated with other model parameters. Additionally, it significantly reduced the uncertainty associated with net recharge, a critical flux for water management that cannot be directly measured and rather is commonly estimated by IHM simulations.

Sardon catchment

Regional characterization of coal resources in the Gulf Coast Coal Region—In support of coal as a potential source for critical minerals and rare earth elements

There is increasing interest in extracting critical minerals (CM), including rare earth elements (REE), from coals in the United States to address the overreliance on imported REE. The Gulf Coast and the Fort Union regions are the two major lignite-bearing regions within the United States. Recent REE and CM studies of the lignite in these regions have indicated that the coals may be a viable source material for REE and CM extraction. To evaluate in-place coal as a potential source of REE and CM, the coal resources need to be quantified. This study presents the results of a regional analysis of Gulf Coast Coal Region lignite and bituminous coal resources that might be available as potential sources of REE and CM. The resource analysis used kriging methods to develop isopleth maps of cumulative coal thickness throughout the region using data from drill holes and measured mine and outcrop sections for a total of 31,181 data points. The estimated total remaining coal resource in the Gulf Coast Coal Region is about 83 billion metric tons in the upper 90 meters (approximately 300 feet) of the subsurface. The current estimate of remaining coal resources includes approximately 1.88 billion metric tons of coal that have been extracted in the region since 1983. Texas accounted for 39 percent (32 billion metric tons) of the remaining total resource, followed by Mississippi (24 percent, 20 billion metric tons ), Louisiana (14 percent, 12 billion metric tons), Tennessee (10 percent, 8.5 billion metric tons), and Arkansas (6 percent, 5.1 billion metric tons). Alabama, Georgia, Kentucky, and Missouri each accounted for less than 5 percent of the total resource; Georgia had the smallest resource estimated at 7 million metric tons. Here we report the first known statewide lignite resource estimates for Georgia, Kentucky (820 million metric tons), and Missouri (1,800 million metric tons). A comparison of the results of this study with those of previous Gulf Coast Coal Region and Fort Union Coal Region resource studies is difficult because each study used different data sources, assessment methodologies, overburden depths, and qualifying coal thicknesses.

Alabama, Arkansas, Florida, Georgia, Illinois, Lou