USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Planets”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources
USGS2024

A semi-mechanistic model for partitioning evapotranspiration reveals transpiration dominates the water flux in drylands

Popular evapotranspiration (ET) partitioning methods make assumptions that might not be well-suited to dryland ecosystems, such as high sensitivity of plant water-use efficiency (WUE) to vapor pressure deficit (VPD). Our objectives were to (a) create an ET partitioning model that can produce fine-scale estimates of transpiration (T) in drylands, and (b) use this approach to evaluate how climate controls T and WUE across ecosystem types and timescales along a dryland aridity gradient. We developed a novel, semi-mechanistic ET partitioning method using a Bayesian approach that constrains abiotic evaporation using process-based models, and loosely constrains time-varying WUE within an autoregressive framework. We used this method to estimate daily T and weekly WUE across seven dryland ecosystem types and found that T dominates ET across the aridity gradient. Then, we applied cross-wavelet coherence analysis to evaluate the temporal coherence between focal response variables (WUE and T/ET) and environmental variables. At yearly scales, we found that WUE at less arid, higher elevation sites was primarily limited by atmospheric moisture demand, and WUE at more arid, lower elevation sites was primarily limited by moisture supply. At sub-yearly timescales, WUE and VPD were sporadically correlated. Hence, ecosystem-scale dryland WUE is not always sensitive to changes in VPD at short timescales, despite this being a common assumption in many ET partitioning models. This new ET partitioning method can be used in dryland ecosystems to better understand how climate influences physically and biologically driven water fluxes.

New Mexico↗
USGS2024

Challenging ring-current models of the Carrington storm

A detailed analysis is made of horizontal-component geomagnetic-disturbance data acquired at the Colaba observatory in India recording the Carrington magnetic storm of September 1859. Prior to attaining its maximum absolute value, disturbance at Colaba increased with an e -folding timescale of 0.46 hr (28 min). Following its maximum, absolute disturbance at Colaba decreased as a trend having an e -folding timescale of 0.31 hr (19 min). Both of these timescales are much shorter than those characterizing the drift period of ring-current ions. Furthermore, over one 28-min interval when absolute disturbance was increasing, the data indicate an absolute rate of change of ≥2,436 nT/hr. If this is representative of disturbance generated by a symmetric magnetospheric ring current, then, assuming a standard and widely used parameterization, an interplanetary electric field of ≥451 mV/m is indicated. An idealized and extreme solar-wind dynamic pressure could, conceivably, reduce this bound on the interplanetary electric field to ≥202 mV/m. If the parameterization for electric-field extrapolation is accurate, but the field strengths obtained are deemed implausible, then it can be concluded that the Colaba disturbance data were significantly affected by partial-ring, field-aligned, or ionospheric currents. The same conclusion is supported by the shortness of the e -folding timescales characterizing the Colaba data. Several prominent studies of the Carrington event need to be reconsidered.

Journal of Geophysical Research Space Physics↗
USGS2024

Limited preservation of strike-slip surface displacement in the geomorphic record

Offset geomorphic markers are commonly used to interpret slip history of strike-slip faults and have played an important role in forming earthquake recurrence models. These data sets are typically analyzed using cumulative probability methods to interpret average amounts of slip in past earthquakes. However, interpretation of the geomorphic record to infer surface slip history is complicated by slip variability, measurement uncertainty, and modification of offset features in the landscape. To investigate how well geomorphic data record surface slip, we use offset measurements from recent strike-slip surface ruptures ( n = 39), faults with geomorphic evidence of multiple strike-slip earthquakes ( n = 29), and synthetic slip distributions with added noise ( n > 10,000) to examine the constraints of the geomorphic record and the underlying assumptions of the cumulative offset probability distribution analysis method. We find that the geomorphic record is unlikely to resolve more than two paleo-slip distributions, except in specific cases with low slip variability, high slip-per-event, and semiarid climate. In cases where site-specific conditions allow for interpretation of more than two earthquakes, lateral extrapolation along a fault is not straightforward because on-fault displacement and distributed deformation may be spatially variable in each earthquake. We also find that average slip in modern earthquakes is adequately recovered by probability methods, but the reported prevalence of strike-slip faults with characteristic slip history is not supported by geomorphic data. We also propose updated methods to interpret slip history and construct uncertainty bounds for paleo-slip distributions.

Journal of Geophysical Research: Solid Earth↗
USGS2024

Controls on the stratigraphic architecture of the US Atlantic margin: Processes forming the accommodation space

Accommodation space governs the spatial and temporal distributions of sediments in continental margins. Mapping the sedimentation patterns, therefore, offers insights into the solid-Earth processes that shape accommodation space. We assembled an unprecedented amount of seismic and borehole data along the Eastern North American Margin and used it to divide the margin's sedimentary package into eight chronostratigraphic intervals, identifying temporal shifts in depocenters under the continental shelf, slope, and rise. The Jurassic depocenters follow the syn-rift structure and its thermal subsidence loci. The Long Island Platform is the only margin segment where the early post-rift sediment thickness matches subsidence predictions from uniform-stretching models, whereas in Georges Bank Basin (GBB) and Baltimore Canyon Trough (BCT), sediment thickness is 1.5–3 times higher than predicted, pointing to other factors at play. A margin-wide Jurassic transient shoulder uplift is inferred from the occurrence of stratigraphic onlaps above thinned crust. Unlike the Jurassic, the Cretaceous and Cenozoic depocenters disregard the inherited subsidence pattern. The accommodation space over the shelf and coastal plain during the Cretaceous was affected by regional isostatic compensation of the sedimentary loads accumulated on the shelf and rise. Accommodation space development in the GBB was interrupted during the Cretaceous after the margin crossed the Great Meteor Hotspot track, resulting in a widespread permanent uplift, erosion, and sediment redistribution. The distribution of anomalous Neogene subsidence in the BCT challenges previous suggestions of mantle dynamic control on the accommodation space and favors flexural downwarping of the shelf by sediment accumulation on the rise.

Journal of Geophysical Research: Solid Earth↗
USGS2024

Earthquake cycle mechanics during caldera collapse: Simulating the 2018 Kīlauea eruption

In multiple observed caldera-forming eruptions, the rock overlying a draining magma reservoir dropped downward along ring faults in sequences of discrete collapse earthquakes. These sequences are analogous to tectonic earthquake cycles and provide opportunities to examine fault mechanics and collapse eruption dynamics over multiple events. Collapse earthquake cycles have been studied with zero-dimensional slider-block models, but these do not account for the complicated interplay between fluid and elastic dynamics or for factors such as the heterogeneous fault properties and non-vertical ring fault geometries often inferred at volcanoes. We present two-dimensional axisymmetric mafic piston-like collapse earthquake cycle models that include rate-and-state friction, fully-dynamic elasticity, and compressible viscous fluid magma flow. We demonstrate that collapse earthquake intervals and magnitudes are highly sensitive to inertial effects, evolving stress fields, fault geometry, and depth-varying fault friction. Given the consistent earthquake cycles observed in most eruptions, this suggests that ring faults can quickly stabilize and often become nearly vertical at depth. We use the well-monitored 2018 collapse sequence at Kı̄lauea as a case study. Our model can produce many features of Kı̄lauea seismic and geodetic observations, except for a significant amount of interseismic slip, which cannot be readily explained with simple rate-and-state friction parameterizations.

Hawaii↗
USGS2024

Afterslip and creep in the rate-dependent framework: Joint inversion of borehole strain and GNSS displacements for the Mw 7.1 Ridgecrest earthquake

The elusive transition toward afterslip following an earthquake is challenging to capture with typical data resolution limits. A dense geodetic network recorded the Mw 7.1 Ridgecrest earthquake, including 16 Global Navigation Satellite System (GNSS) stations and 3 borehole strainmeters (BSM). The sub-nanostrain precision and sub-second sampling rate of BSMs bridges a gap between conventional seismologic and geodetic methods, exemplified by atypical postseismic shear strain reversals observed at nearfield (<2 km) station B921 that remain unexplained. We jointly invert GNSS displacements and BSM strains for coseismic and postseismic slip spanning hours to months over 7 independent periods. Cosiesmically, our model resolves the largest slip magnitudes of up to 6.6 m on the mainshock rupture plane, with similar patterns to other inferred slip distributions. The foreshock fault appears to slip coincidently with mainshock, revealing potential asperities activated during the preceding Mw 6.4 event. Postseismically, the best-fitting models adhere to mechanical rate-and-state expectations of logarithmically decaying slip adjacent to the coseismic rupture terminus, and where deep rheologic conditions favor creep. Most spatial variation occurs in the early postseismic timeframe (<1–2 weeks), with evidence for regional rheologic control and static stress dependence. Triggered creep on the neighboring Garlock Fault unexpectedly persists for >178 days—further highlighting the importance of fault networks in postseismic stress redistribution, critical to assessing future hazard.

Journal of Geophysics Research↗
USGS2024

Subduction zone geometry modulates the megathrust earthquake cycle: Magnitude, recurrence, and variability

Megathrust geometric properties exhibit some of the strongest correlations with maximum earthquake magnitude in global surveys of large subduction zone earthquakes, but the mechanisms through which fault geometry influences subduction earthquake cycle dynamics remain unresolved. Here, we develop 39 models of sequences of earthquakes and aseismic slip (SEAS) on variably-dipping planar and variably-curved nonplanar megathrusts using the volumetric, high-order accurate code tandem to account for fault curvature. We vary the dip, downdip curvature and width of the seismogenic zone to examine how slab geometry mechanically influences megathrust seismic cycles, including the size, variability, and interevent timing of earthquakes. Dip and curvature control characteristic slip styles primarily through their influence on seismogenic zone width: wider seismogenic zones allow shallowly-dipping megathrusts to host larger earthquakes than steeply-dipping ones. Under elevated pore pressure and less strongly velocity-weakening friction, all modeled fault geometries host uniform periodic ruptures. In contrast, shallowly-dipping and sharply-curved megathrusts host multi-period supercycles of slow-to-fast, small-to-large slip events under higher effective stresses and more strongly velocity-weakening friction. We discuss how subduction zones' maximum earthquake magnitudes may be primarily controlled by the dip and dimensions of the seismogenic zone, while second-order effects from structurally-derived mechanical heterogeneity modulate the recurrence frequency and timing of these events. Our results suggest that enhanced co- and interseismic strength and stress variability along the megathrust, such as induced near areas of high or heterogeneous fault curvature, limits how frequently large ruptures occur and may explain curved faults' tendency to host more frequent, smaller earthquakes than flat faults.

Journal of Geophysical Research: Solid Earth↗
USGS2024

Brittle regime slip partitioned damage and deformation mechanisms along the eastern Denali fault zone in southwestern, Yukon

Rare bedrock exposures of the eastern Denali fault zone in southwestern Yukon allow for the measurement, sampling, and analyses of brittle regime fault slip data and deformation mechanisms to explore relations to far field, oblique plate motions. Host rock lithologies and associated slip surfaces show episodic damage zone‐related deformation and calcite ± hematite ± chlorite related hydrothermal fluid flow. This regional scale network of asymmetric fault damage is spatially and kinematically linked to a discrete and narrow fault core. Fault network observations, orientations, slip data, and strain inversions document a slip partitioned strike‐slip fault system with locally and mutually overprinting strike‐, oblique‐, and dip‐slip components. Microstructural analyses reveal crystal plastic and co‐seismic brittle deformation mechanisms active in a narrow range of upper crustal temperature, pressure, fluid, and chemical conditions. The net damage related slip is not exclusively formed by a single kinematic system, but rather a fully partitioned, time integrated system likely operative for much of the fault's brittle regime evolution temporally constrained by previously published thermochronometric data. Although the fault slip data was collected from outcrop‐scale exposures at sites tens of kilometers apart, results show remarkable correlation between fault kinematics and plate motions along the ∼580 km long eastern Denali fault segment. End member, subhorizontal, northeast directed reverse and north directed dextral strike slip fault strain axes closely reflect relative plate motion interactions over at least the last 30 m.y. and act as a proxy for far‐field stresses compatible with the kinematics of the damage zone network.

Alaska↗
USGS2025

3D viscoelastic models of slip-deficit rate along the Cascadia subduction zone

Interseismic deformation in the Pacific Northwest is constrained by the horizontal crustal velocity field derived from the Global Positioning System (GPS) in addition to vertical rates derived from GPS, leveling, and tide gauge measurements. Such measurements were folded in to deformation models of fault slip rates as part of the 2023 National Seismic Hazard Model (NSHM) update. Here I build upon one of the contributing models, the viscoelastic earthquake-cycle model of Pollitz [2022]. This model permits inclusion of effects of time-dependent viscoelastic relaxation within earthquake cycles (i.e., ‘ghost transients’) and laterally variable elastic and/or ductile material properties. I lever-age these capabilities to incorporate the Cascadia megathrust into Western U.S.-wide deformation models in which crustal fault slip rates are estimated simultaneously with slip deficit rates along the interplate boundary between the descending Juan de Fuca plate and North American plate. This effort includes construction of a margin-wide model of viscoelastic structure founded on the Slab 2.0 model and probes different models of the ductile properties of the surrounding oceanic asthenosphere, continental lower crust, and mantle asthenosphere. This results in new estimates of the distribution of slip deficit rate along the ∼ 1000 km long margin, highlights the importance of correcting for glacial-isostatic adjustment effects, and permits assessment of sensitivity of results to assumed ductile properties.

California, Oregon, Washington↗
USGS2025

Timescales of surface faulting preservation in low-strain intraplate regions from landscape evolution modeling and the geomorphic and historical record

Large surface-rupturing intraplate earthquakes in stable continental regions (SCRs) are uncommon globally and have recurrence intervals of thousands to hundreds of thousands of years based on the paleoseismic and geomorphic record, challenging accurate active fault identification in these regions. To constrain the timescales of preservation for scarps created by surface ruptures from dip-slip earthquakes, we use a two-dimensional scarp diffusion model for typical intraplate settings and explore which parameters influence fault scarp preservation. These parameters include the coseismic vertical surface offset, the recurrence interval of similar magnitude earthquakes, diffusivity (as a proxy for mean annual precipitation rate), and the erodibility of the surficial material. We constrain parameter ranges from a compilation of historical surface ruptures in intraplate settings in a variety of climates, including the Central and Eastern United States, Australia, Europe, Central Asia (Mongolia, China), India, and West Africa. The timescales of scarp preservation from landscape evolution modeling agree well with observations of scarp preservation in low-strain SCR and intraplate tectonic settings, with some notable exceptions for Australian scarps. We find that the erodibility of the surficial material and earthquake recurrence interval have a stronger effect on the timescales of scarp preservation than diffusivity or coseismic vertical surface offset. Our model results may aid in identifying and characterizing subtle, slow-moving active faults in low-strain SCR and intraplate tectonic settings for different tectonic, geomorphic, and climatic characteristics. Accurate fault locations and characterization from the landscape record has implications for both probabilistic seismic and fault displacement hazard analyses.

Journal of Geophysical Research Solid Earth↗
USGS2025

Crustal structure along and surrounding the Hawaiian Islands: Volcanic island construction across scarred oceanic crust

The Hawaiian Ridge is a classic example of an intraplate volcanic island chain emplaced on oceanic lithosphere. We seek to constrain both the deformation from island loading around the Hawaiian Ridge and the influence of the oceanic lithosphere, including the Molokaʻi fracture zone (MFZ), on off-axis volcanic emplacement. To examine these processes, we conducted a marine geophysical experiment in 2018 that included the acquisition of eight multichannel seismic reflection lines and used a 6,600 in 3 tuned air gun array and an ultra-long hydrophone streamer cable towed behind R/V Marcus G. Langseth across and around the southern Hawaiian Ridge. We image both the top of igneous oceanic crust and the Moho, and we observe significant variations in regional crustal structure and thickness variations, Moho characteristics, the locations of the buried MFZ, and the flexure of the Pacific oceanic lithosphere under the Hawaiian Ridge. We observe up to ∼4.5 km of deflection of the igneous oceanic crust in response to the volcanic load with sediment thickness increasing to ∼3–3.4 km near the ridge but not correlating with the deflection. A systematic difference in igneous oceanic crustal thickness is found north (average ∼5.2 km) and south (average ∼5.9 km), of the MFZ that also correspond to changes in Moho characteristics. The MFZ itself is associated with the largest crustal thickness variations (∼3.7–7.6 km). Magma ascent through these different crustal regions may account for some variations of magmatic flux to the surface along the Hawaiian Ridge.

Hawaii↗
USGS2025

New paleomagnetic constraints on the eruption timing, stratigraphy, and post-emplacement deformation of the Picture Gorge Basalt within the Columbia River Basalt Group

The Picture Gorge Basalt (PGB) is part of the Miocene Columbia River Basalt Group (CRBG). The PGB, which outcrops in eastern Oregon, is considered coincident in time with the voluminous Grande Ronde Basalt. New radiometric ages have expanded the age‐range of the PGB, suggesting it began erupting prior to the Steens Basalt to its south and continued until after cessation of the Grande Ronde Basalt eruptions, an interval of 1.5 Ma. However, the existing paleomagnetism of the PGB implies this eruption timeline is an overestimate. To reconcile the radiometric and paleomagnetic timescales for the PGB, we conducted a paleomagnetic study on sections of the PGB to construct a detailed, high‐quality magnetostratigraphy. Our data indicate the stratigraphically lowest lava flows in the PGB are of reversed polarity, revealing a new paleomagnetic transition with the PGB and a reversed (R)–normal (N)–reversed (R) sequence. This suggests one of two timeline possibilities for PGB volcanism: (a) eruptions began and during through CRBG polarity chrons R0–N0–R1, penecontemporaneous with Steens Basalt, or (b) eruptions began and persisted during CRBG polarity chrons R1–N1–R2. Our work supports a longer interval of PGB volcanism than was suggested by previous paleomagnetic data but is at odds with the suggestion that PGB eruptions lasted through the entire main CRBG. We favor a scenario wherein PGB eruptions begin with R0 and continue into the R1 paleomagnetic interval. The paleomagnetic results also record a ∼18° vertical‐axis rotation of east‐central Oregon after ∼16 Ma with respect to stable North America.

Oregon↗
USGS2025

Estuarine exchange flow in the Albemarle-Pamlico estuarine system

Estuarine exchange flow controls the salt balance and regulates biogeochemistry in an estuary. The Albemarle-Pamlico estuarine system (APES) is the largest coastal lagoon in the U.S. and historically susceptible to a series of environmental issues including salt water intrusion and eutrophication, yet its estuarine exchange flow is poorly understood. Here, we investigate the estuarine exchange flow in the APES, its tributary estuaries (Pamlico and Neuse), and sub-basin Albemarle Sound using the total exchange flow analysis framework based on results from a deterministic numerical model. We find the following: (a) Dynamics controlling estuarine exchange flow in the APES vary spatially and depend on timescales considered. At inlets, estuarine exchange flows respond to both tidal prism and residual water levels at weather-to-spring/neap timescales. At a long quasi-steady timescale represented as annual means, estuarine exchange flow is dominated by barotropic flow. Within the tributary estuaries, estuarine exchange flows at timescales of wind periods are controlled by wind-induced straining, whereas the quasi-steady state condition is dominated by gravitational circulation. At Albemarle Sound, exchange flow is dominated by the residual water levels at weather-to-spring/neap timescales, while at quasi-steady state it is controlled by barotropic flow. (b) At the quasi-steady annual timescale, the salt content decreases with river discharge. At the weather-to-spring/neap timescales, salt content is insensitive to variations in estuarine exchange flow, except for within Albemarle Sound. (c) Estuarine exchange flow likely influences the biogeochemistry of the APES by playing a key role in regulating the flushing efficiency and material exchange, a role that has been previously overlooked.

North Carolina↗
USGS2024

Constraining mean landslide occurrence rates for non-temporal landslide inventories using high-resolution elevation data

Constraining landslide occurrence rates can help to generate landslide hazard models that predict the spatial and temporal occurrence of landslides. However, most landslide inventories do not include any temporal data due to the difficulties of dating landslide deposits. Here we introduce a method for estimating the mean landslide occurrence rate of deep-seated rotational and translational slides derived solely from high-resolution (≤3 m) elevation data and globally available estimates of the diffusion coefficient for sediment flux. The method applies a linear diffusion model to the roughest landslide deposits until they reach a representative non-landslide roughness distribution. This estimates the time for a landslide deposit to be unrecognizable in high-resolution digital elevation data, which we term the mean lifetime of the landslide. Using the mean lifetime and number of landslides within an area of interest, we can estimate the mean occurrence rate of landslides over that domain. We validate this approach using a comprehensive temporal inventory of landslides in western Oregon created using age-roughness curves that are calibrated with high-resolution elevation data and radiocarbon data. We find good agreement between our diffusion method and the existing age-roughness-derived estimates, producing mean lifetimes of 4500 and 5200 years (4% difference), respectively. Hazard maps produced using the two methodologies generally agree, with the maximum differences in landslide probability reaching 0.1. Due to the relative abundance of high-resolution elevation data compared with age-dated landslides, our method could help constrain landslide occurrence rates in areas previously considered unfeasible.

Oregon↗
USGS2024

Postfire sediment mobilization and its downstream implications across California, 1984 – 2021

Fire facilitates erosion through changes in vegetation and soil, with major postfire erosion commonly occurring even with moderate rainfall. As climate warms, the western United States (U.S.) is experiencing an intensifying fire regime and increasing frequency of extreme rain. We evaluated whether these hydroclimatic changes are evident in patterns of postfire erosion by modeling hillslope erosion following all wildfires larger than 100 km 2 in California from 1984 to 2021. Our results show that annual statewide postfire hillslope erosion has increased significantly over time. To supplement the hillslope erosion modeling, we compiled modeled and measured postfire debris-flow volumes. We find that, in northern California, more than 50% of fires triggering the top 20 values of sediment mass and sediment yield occurred in the most recent decade (between 2011 and 2021). In southern California, the postfire sediment budget was dominated by debris flows, which showed no temporal trend. Our analysis reveals that 57% of postfire sediment erosion statewide occurred upstream of reservoirs, indicating potential impacts to reservoir storage capacity and thus increased risk to water-resource security with ongoing climate change.

California↗
USGS2024

RegionGrow3D: A deterministic analysis for characterizing discrete three-dimensional landslide source areas on a regional scale

Regional-scale characterization of shallow landslide hazards is important for reducing their destructive impact on society. These hazards are commonly characterized by (a) their location and likelihood using susceptibility maps, (b) landslide size and frequency using geomorphic scaling laws, and (c) the magnitude of disturbance required to cause landslides using initiation thresholds. Typically, this is accomplished through the use of inventories documenting the locations and triggering conditions of previous landslides. In the absence of comprehensive landslide inventories, physics-based slope stability models can be used to estimate landslide initiation potential and provide plausible distributions of landslide characteristics for a range of environmental and forcing conditions. However, these models are sometimes limited in their ability to capture key mechanisms tied to discrete three-dimensional (3D) landslide mechanics while possessing the computational efficiency required for broad-scale application. In this study, the RegionGrow3D (RG3D) model is developed to broadly simulate the area, volume, and location of landslides on a regional scale (≥1,000 km 2 ) using 3D, limit-equilibrium (LE)-based slope stability modeling. Furthermore, RG3D is incorporated into a susceptibility framework that quantifies landsliding uncertainty using a distribution of soil shear strengths and their associated probabilities, back-calculated from inventoried landslides using 3D LE-based landslide forensics. This framework is used to evaluate the influence of uncertainty tied to shear strength, rainfall scenarios, and antecedent soil moisture on potential landsliding and rainfall thresholds over a large region of the Oregon Coast Range, USA.

Journal of Geophysical Research: Earth Surface↗
USGS2025

Uncertainty reduction for subaerial landslide-tsunami hazards

Subaerial rock slopes may generate a tsunami by rapidly moving into the water. Large uncertainty in landslide characteristics propagates into large uncertainty in tsunami hazard, making hazard assessment more difficult for land and emergency managers. Once a potentially tsunamigenic landslide is identified, it may not be clear which landslide characteristics contribute most significantly to uncertainty in the tsunami hazard. Our aim is to document the relative worth of different landslide characteristics (e.g., size, material properties) for reducing uncertainty in landslide-tsunami hazard assessments. Isolating the relative importance of specific landslide characteristics may inform prioritization of data collection and improve efficiency in understanding hazard. To accomplish this, we generated a set of 288 landslide-tsunami simulations in which we systematically varied the size and material properties of possible failure extents at the Barry Arm landslide complex in northwestern Prince William Sound, Alaska, USA. We find that for landslides smaller than the receiving waterbody, the landslide volume has the strongest effect on resulting wave characteristics and thus the highest leverage on reducing uncertainty in tsunami hazard. In contrast, for landslides substantially larger than the waterbody, the duration of rapid movement of the landslide has the highest leverage. Based on our results, we propose a classification scheme for subaerial landslides based on the relative size of the landslide and waterbody. Additionally, our results support the generation of a tsunami height transfer function between existing tide gages and a nearby coastal city. These results have direct implications for the practice of operational early warning.

Alaska↗
USGS2024

Hyperspectral imaging predicts differences in carbon and nitrogen status among representative biocrust functional groups of the Colorado Plateau

Biological soil crusts (biocrusts) are widespread soil photosynthetic communities covering about 12% of Earth's land surface and play crucial roles in terrestrial carbon (C) and nitrogen (N) cycles, yet scalable quantifications of biocrusts and their biogeochemical contributions are notably lacking. While remote sensing has enormous potential to assess, scale, and contextualize biocrusts and their functions, the applicability of hyperspectral data in predicting C- and N-related biocrust traits remains largely unexplored. We address this issue by evaluating the potential of in situ hyperspectral data to predict C and N across a range of biocrust species and different environmental conditions. We found that in situ hyperspectral reflectance measurements can be used to predict biocrust tissue C/N ratios and N concentrations with relatively high accuracy but to a lesser extent for potential biocrust N2 fixation rates. Critical wavelength domains included the visible region of the spectrum from roughly 490–600 nm, which most effectively captured variations in biocrust tissue C, and the shortwave infrared region from 1,150 to 1,350 nm and 1,550–1,650 nm, which most effectively captured biocrust tissue N and N2 fixation potential. Finally, we provide evidence that multi- and hyperspectral missions with targeted band placement, such as the proposed 26-band Landsat Next, could be effective in predicting biocrust traits. This work provides a critical step in understanding how to apply data from new and upcoming satellite missions to the monitoring of biocrusts.

Utah↗