USGS Science⌕ Search

SEARCH · USGS Science

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources
USGS2026

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv↗
USGS1980

EROS Data Center

The Earth Resources Observation Systems (EROS) Data Center, located in Sioux Falls, SD, is a data management, systems development, and research field center of the U.S. Geological Survey's National Mapping Division. The Center was established in the early 1970's to receive, process, and distribute data from National Aeronautics and Space Administration (NASA) Landsat satellites. The Center holds the world's largest collection of space and aircraft acquired imagery of the Earth. These holdings include over 2 million images acquired from satellites and over 8 million aerial photographs. The Center is also a major focal point for information concerning the holdings of foreign Landsat ground reception stations and data acquired by other countries' Earth observing satellites. The central U.S. location provides the Center with a unique capability to receive real-time electronic signals from Earth orbiting satellites, used for developing data sets of most of the North American continent.

General Information Product↗
USGS1976

Access routes to the U.S. Geological Survey's EROS Data Center, Sioux Falls, South Dakota

The EROS Data Center is a part of the Earth Resources Observation Systems (EROS) Program of the Department of the Interior, managed by the U.S. Geological Survey. It is the national center for the processing anddissemination of spacecraft and aircraft acquired photographic imagery and electronic data of the Earth's resources. The center also trains and assists users in the application of such data. The EROS Data Center provides access to Landsat data, aerial photography acquired by the U.S. Department of the Interior, and photography and other remotely sensed data acquired by the National Aeronautics and Space Administration (NASA) from research aircraft and from Skylab, Apollo, and Gemini spacecraft.

South Dakota↗
USGS1980

Introduction to the U.S. Geological Survey's EROS Data Center Sioux Falls, South Dakota

The EROS Data Center is a part of the Earth Resources Observation Systems (EROS) Office of the Department of the Interior and is managed by the U.S. Geological Survey. It is the national clearinghouse for the processing and dissemination of spacecraft- and aircraft-acquired images and photographs and electronic data on the Earth's resources. The Center also trains and assists users in the application of such data.

South Dakota↗
USGS1992

Planetary maps

An important goal of the USGS planetary mapping program is to systematically map the geology of the Moon, Mars, Venus, and Mercury, and the satellites of the outer planets. These geologic maps are published in the USGS Miscellaneous Investigations (I) Series. Planetary maps on sale at the USGS include shaded-relief maps, topographic maps, geologic maps, and controlled photomosaics. Controlled photomosaics are assembled from two or more photographs or images using a network of points of known latitude and longitude. The images used for most of these planetary maps are electronic images, obtained from orbiting television cameras, various optical-mechanical systems. Photographic film was only used to map Earth's Moon.

General Information Product↗
USGS1963

Preliminary study of first motion from nuclear explosions recorded on seismograms in the first zone

The U.S. Geological Survey has recorded more than 300 seismograms from more than 50 underground nuclear explosions. Most were recorded at distances of less than 1,000 km. These seismograms have been studied to obtain travel times and amplitudes which have been presented in reports on crustal structure and in a new series of nuclear shot reports. This report describes preliminary studies of first motion of seismic waves generated by underground nuclear explosions. Visual inspection of all seismograms was made in an attempt to identify the direction of first motion, and to estimate the probability of recording detectable first motion at various distances for various charge sizes and in different geologic environments. In this study, a characteristic pattern of the first phase became apparent on seismograms where first motion was clearly recorded. When an interpreter became familiar with this pattern, he was frequently able to identify the polarity of the first arrival even though the direction of first motion could not be seen clearly on the seismogram. In addition, it was sometimes possible to recognize this pattern for secondary arrivals of larger amplitude. These qualitative visual observations suggest that it might be possible to define a simple criterion that could be used in a digital computer to identify polarity, not only of the first phase, but of secondary phases as well. A short segment of recordings near the first motion on 56 seismograms was digitized on an optical digitizer. Spectral analyses of these digitized recordings were made to determine the range of frequencies present, and studies were made with various simple digital filters to explore the nature of polarity as a function of frequency. These studies have not yet led to conclusive results, partly because of inaccuracies resulting from optical digitization. The work is continuing, using an electronic digitizer that will allow study of a much larger sample of more accurately digitized data.

Crustal Studies Technical Letter↗
USGS1985

Significance of tourmaline-rich rocks in the Grenville Complex of St. Lawrence County, New York

Feldspathic quartzite and metapelite of Middle Proterozic age north of Gouverneur, N.Y., contain abundant dravite-uvite (magnesian tourmaline). These rocks, more than 1,000 feet thick, are regionally metamorphosed to the upper amphibolite facies, are pyritic, and locally contain porphyroblastic scapolite. The rocks are underlain by talctremolite schist and a thick sequence of calcitic and dolomitic marble, and are overlain by quartz, calc-silicate carbonate rock, and a pyroxene scapolite unit. All rocks are part of the metasedimentary Grenville Complex. Individual tourmaline-rich layers in the quartzite are as thick as 3 cm and contain as much as 50 percent finegrained, brownish-green dravite. Subjacent talc schist contains fine-grained amber dravite, and silicated marble locally contains brown porphyroblasts of uvite. Gneissic granite, pegmatite, and migmatitic segregations cutting the tourmaline-bearing quartzite, gneisses, and schists are rich in black schorl. Tourmalines from the tourmaline-rich quartzite and other metasedimentary and metaigneous rocks were analyzed by means of an electron microprobe. The compositions of tourmalines in the North Gouverneur area are clearly a function of the bulk composition of the rock. Tourmaline compositions in the quartzite have a wide range in FeO/(Fe+MgO) ratios, from 0.15 to 0.58, which are distinct from the ratios for tourmalines in granitic and pegmatitic rocks that range from 0.55 to 0.75. Tourmalines in the area have Na2O contents that range from 0.85 to 4.25 weight percent. Aluminum in all tourmalines ranges widely from about 25 to 37 weight percent AI 2O3 . The most heterogeneous tourmaline compositions are in the quartzites, although most compositions cluster in the dravite-uvite solid solution series. Substitutions involving Na, Ca, Mg, Fe, and Al result in the following compositional schemes: Na+Fe = Al+vacancy, and Na = Ca. Such coupled substitutions probably represent valid constraints for tourmalines from North Gouverneur. The abundance of magnesian tourmaline in the metasedimentary rocks of the North Gouverneur area is comparable to that of tourmaline-rich rocks associated with sedimenthosted massive sulfide deposits for example, Sullivan Mine, British Columbia. A recently described large lead-zinc deposit at Dugald River, Australia, is associated with tourmaline- and scapolite-bearing rocks similar in many respects to those north of Gouverneur. Compared with known tourmaline compositions in the Sullivan Mine area, tourmalines from North Gouverneur have comparable FeO and MgO values. We suggest that other tourmaline components such as a low TiO2 content, variable Na/(Na + Ca + K) ratios, and the antipathetic correlation of Na and Ca might also be useful in discriminating tourmalines associated with ore deposits. Ore bodies at the nearby Balmat-Edwards mining district are in marbles associated with rocks of evaporitic origin. The boron- and scapolite-rich rocks under consideration in this study possibly also are related to an evaporite-producing environment. Similar rocks that have an evaporite origin are associated with stratabound sulfide deposits at many places.

Bulletin↗
USGS1992

Separation and identification of the silt-sized heavy-mineral fraction in sediments

The separation of silt-sized minerals by specific gravity is made possible by using a nontoxic, heavy liquid medium of sodium polytungstate and water. Once separated, the silt-sized heavy-mineral fraction is prepared for analysis with a scanning electron microscope equipped with an automatic image analyzer and energy-dispersive spectrometer. Particles within each sample are sized and sorted according to their chemistry, and the data are tabulated in histograms and tables. Where possible, the user can define the chemical categories to simulate distinct mineral groups. Polymorphs and minerals that have overlapping compositions are combined into a group and differentiated by X-ray diffraction. Hundreds of particles can be rapidly sized and classified by chemistry. The technique can be employed on sediments from any environment.

Circular↗
USGS2001

Gold recycling in the United States in 1998

In 1998, 175 metric tons (t) of refined gold was recovered by U.S. refiners from old and new scrap. The overall recycling rate was 29 percent when scrap consumption was compared with apparent domestic supply. Sources of old scrap includes discarded jewelry, dental materials, plating solutions, and electronic equipment. A very high old scrap recycling efficiency of 96 percent was reached in 1998, the supply of old scrap peaked, gold prices were at an 18-year low, and substantial amounts of old scrap were exported. U.S. net exports of old scrap had a gold content of 28 t.

Circular↗
USGS2003

Silver recycling in the United States in 2000

In 2000, the global silver supply deficit (the difference between mine and scrap supply and silver demand) was more than 3,000 metric tons. U.S. silver demand for photographic applications alone was nearly equal to annual U.S. silver production. Until 1968, the U.S. silver deficit was filled by withdrawals from the U.S. Treasury reserves. In 2000, the deficit was filled by destocking, imports, and recycling. Photographic wastes, spent catalysts, and electronic scrap are the major sources of materials for silver recycling. Nearly 1,800 metric tons of silver contained in these materials were available for recycling in 2000. Other recyclable silver-bearing materials include dental alloys, jewelry, and silverware. In 2000, an estimated 1,700 tons of silver were recovered from secondary sources in the United States. The U.S. recycling efficiency for old scrap was calculated to have been 97 percent in 2000; the recycling rate was estimated to be 32 percent.

Circular↗
USGS2008

Report of the Federal Advisory Committee on the Bird Banding Laboratory

In the fall of 2005, the Directors of the U.S. Geological Survey (USGS) and the U.S. Fish and Wildlife Service (FWS) determined that to ensure that the Bird Banding Laboratory (BBL) of the USGS maintains and continues its important support of conservation and management of birds, it should be guided by a clear vision for the future. In order to carry out this task, they impaneled a fourteen-member Federal Advisory Committee (FAC) on the Bird Banding Laboratory. It was made up of representatives of the broad bird-banding community, public and private, and was cochaired by a senior representative from each agency. The Committee met four times and a writing subgroup met three times over the course of its work. The Committee identified a new vision and mission for the BBL and identified six goals that it believes should be integral to the development of a strategic plan to achieve them. Those goals are: 1. Facilitate the identification of individual birds through marking. 2. Create automated, electronic systems that efficiently verify, accept, store, and manage data associated with individually marked birds. 3. Facilitate access to and use of data from marked birds for science, conservation, and management. 4. Administer permits in an efficient, timely, and modern manner, and use them to ensure that bird welfare and data quality remain top priorities. 5. Work closely with national and international partners to achieve the mission of the BBL. 6. Manage the BBL in an efficient, cost-effective manner to maximize use of available resources. Most of the report is structured around these goals. The Committee made 2 programmatic recommendations and identified 23 objectives and 58 specific recommendations. The programmatic recommendations are: (1) that the primary role of the BBL is and should continue to be to support the use of banding and banding data by researchers and managers engaged in science, conservation, and management of birds, and not to play a lead role in original research; and (2) that the BBL be managed nationally by USGS headquarters as a research and operational support unit and provided with the resources appropriate to its national and international functions and responsibilities; it should continue to be located physically at the Patuxent Wildlife Research Center (PWRC). In order to achieve its vision and mission, the Committee believes that the BBL must work towards achieving all of the recommendations in this report. Nevertheless, it identified five objectives that stand out as high priority, and they are as follows: *Objective 1.1?to ensure a continuing, adequate supply of high-quality, Federally issued numeric bands of required sizes, materials, and types; *Objective 2.1?to improve mechanisms for verifying, accepting, storing, and managing bird-banding data; *Objective 2.3?to accommodate recapture data; *Objective 4.1?to ensure through the permitting process that banders know how to safely handle birds, collect data accurately, and maintain birds in humane and healthful conditions; and *Objective 5.3?to encourage the development of banding programs in Latin America and the Caribbean. Finally, this Committee believes that the BBL will be well served if it continues to support a Federal Advisory Committee, composed similarly to this one, to continue offering guidance and direction from the broad bird-banding community.

Circular↗
USGS2019

National earthquake information center strategic plan, 2019–23

Executive Summary Damaging earthquakes occur regularly around the world; since the turn of the 20th century, hundreds of earthquakes have caused significant loss of life and (or) millions of dollars or more in economic losses. While most of these did not directly affect the United States and its Territories, by studying worldwide seismicity we can better understand how to mitigate the effects of earthquakes when they do occur within U.S. borders. Within the U.S. Government, this mandate falls on the U.S. Geological Survey (USGS) National Earthquake Information Center (NEIC), which has the statutory responsibility for monitoring and reporting on earthquakes domestically and globally. The NEIC has been operating since 1966, and throughout its history has been recognized as a world leader for earthquake information. For much of this time, NEIC has been cooperating with a number of regional seismic networks (RSNs) which operate in areas of heightened seismicity in the United States. In 2000, the Advanced National Seismic System (ANSS) was founded as a cooperative umbrella for earthquake-related data collection, analysis, and dissemination in the United States, thereby promoting advanced interoperability between the NEIC and RSN partners. The NEIC also cooperates and coordinates with dozens of global seismic networks. At present (2019), NEIC acquires real-time waveform data from more than 2,000 seismic stations worldwide, contributed from more than 130 seismic networks. Since 2006, the NEIC has operated on a 24-hour, 7-days per week (24/7) basis, and reports on about 30,000 earthquakes per year. Soon after the occurrence of a significant global earthquake, notifications are issued to government representatives, aid agencies, the press, and members of the general public by the Earthquake Notification Service (ENS), electronic feeds, and through the USGS Earthquake Hazards Program (EHP) website. Event-specific web pages provide detailed source parameter information outlining the location and magnitude of the earthquake, including more detailed source characteristics like moment magnitude and focal mechanisms and finite fault solutions. Further, NEIC produces a suite of real-time situational awareness products, including ShakeMap, ShakeCast, Did-You-Feel-It? (DYFI?), and Prompt Assessment of Global Earthquakes for Response (PAGER), to characterize the shaking resulting from the earthquake and the impact it is likely to have on nearby populations and infrastructure. All of these products are ultimately archived in the ANSS Comprehensive Catalog (ComCat), hosted and served by the NEIC. The NEIC also pursues an active research program to improve its ability to characterize earthquakes and understand their hazards. These efforts are all aimed at mitigating the risks of earthquakes to humankind. To maintain its prominent position in earthquake monitoring, the NEIC must continue to evolve, concurrently improving its operations and 24/7 robustness, streamlining services and infrastructure, and keeping pace with research and innovation in the field of seismology. This document outlines how the NEIC might best achieve such goals, by describing specific avenues and opportunities for development in the next five years (2019–23). Several key areas of operational and research focus are identified in this plan as being of the highest importance. First, NEIC must finalize improvements to its regional monitoring capabilities, including the implementation of a variety of improved earthquake detection and association algorithms. One of the most exciting avenues of recent research expansion in earthquake monitoring has involved the use of machine learning; NEIC must explore the benefits of machine learning for improved earthquake detection and source characterization. NEIC also needs to address issues related to the timeliness of earthquake information, exploring the benefits of distributing information as it becomes available, rather than when certain quality criteria are met. To that end, the incorporation of real-time Global Positioning System (GPS) data into the NEIC operational workflow will help improve the speed and accuracy of information for moderate-to-large earthquakes. Finally, NEIC should explore how to further expand and improve the quality and content of the products served during earthquake response efforts, including the generation of new earthquake sequence-specific products, adding an evolutionary component to earthquake information, and continued improvements to earthquake impact products.

Circular↗
USGS1954

The Model VI transmission fluorimeter for the determination of uranium

An improved transmission fluorimeter (Model VI) for use in the determination of uranium consists of a line-operated, low-voltage d-c supply, powering a small 3-watt ultraviolet lamp as a source of long wavelength ultraviolet radiation; a Model V phototube housing and. fluorimeter head containing the sample holder, shutter, and primary and secondary filters; an end-window multiplier phototube powered by a stable, commercially available high-voltage supply; and an electronic microammeter for measuring the output current from the photomultiplier tube. The instrument has excellent electrical stability and operates over a wide range of sensitivity. Its versatility makes it useful for both routine and research work.

Circular↗
USGS1985

Bibliography of borehole geophysics as applied to ground-water hydrology

Most of the references on borehole geophysics that are relevant to ground-water hydrology are contained in this bibliography, but it does not include every reference that is available under each subject heading; the literature is much too extensive to compile a complete listing. Some of the references may appear under more than one subject heading because the references commonly relate to more than one main topic. Many articles have been cross-referenced in order to assist the reader in locating an article. For example, the article entitled, 'Application of the acoustic televiewer to the characterization of hydraulic fractures in geothermal wells' is listed under both 'Acoustic televiewer,' and 'Geothermal'. The bibliography is intended to lead the reader to other articles on borehole-geophysical logging and related subjects, because each article cited also will have a list of references, which may be more specialized, covering many subjects with related applications, such as physics, mathematics, chemistry, geology, electronics, acoustics, hydrology, and surface geophysics. However, not all of these related subject headings could be included in this bibliography.

Circular↗
USGS1990

International strategic minerals inventory summary report; tin

The International Strategic Minerals Inventory tin inventory contains records for 56 major tin deposits and districts in 21 countries. These countries accounted for 98 percent of the 10 million metric tons of tin produced in the period 1934-87. Tin is a good alloying metal and is generally nontoxic, and its chief uses are as tinplate for tin cans and as solder in electronics. The 56 locations consist of 39 lode deposits and 17 placers and contain almost 7.5 million metric tons of tin in identified economic resources (R1E) and another 1.5 million metric tons of tin in other resource categories. Most of these resources are in major deposits that have been known for over a hundred years. Lode deposits account for 44 percent of the R1E and 87 percent of the resources in other categories. Placer deposits make up the remainder. Low-income and middle-income countries, including Bolivia and Brazil and countries along the Southeast Asian Tin Belt such as Malaysia, Thailand, and Indonesia account for 91 percent of the R1E resources of tin and for 61 percent of resources in other categories. The United States has less than 0.05 percent of the world's tin R1E in major deposits. Available data suggest that the Soviet Union may have about 4 percent of resources in this category. The industrial market economy countries of the United States, Japan, Federal Republic of Germany, and the United Kingdom are major consumers of tin, whereas the major tin-producing countries generally consume little tin. The Soviet Union and China are both major producers and consumers of tin. At the end of World War II, the four largest tin-producing countries (Bolivia, the Belgian Congo (Zaire), Nigeria, and Malaysia) produced over 80 percent of the world's tin. In 1986, the portion of production from the four largest producers (Malaysia, Brazil, Soviet Union, Indonesia) declined to about 55 percent, while the price of tin rose from about $1,500 to $18,000 per metric ton. In response to tin shortages during World War II, the United States began stockpiling refined tin metal from approximately 1946 to 1953 to ensure a strategic supply in the event of another war. Since World War II, there have been six International Tin Agreements to maintain price and supply stability between tin producers and consumers. Artificially high prices set by the tin-producing members and a tin glut brought on by independent producers like Brazil caused the collapse of the world tin market in late 1985; the International Tin Council exhausted its credit to support the market price. By the year 2025, Bolivia's underground lode mines will likely have insignificant production, as will those in the United Kingdom. Tin mines in the Southeast Asian Tin Belt will still be active. Brazil, which has risen from the eighth-ranked tin-producing country in 1982 to the largest producer in 1988, will likely be a major influence on world tin production well into the 21st century. The future mining activity of deposits presently inactive in Australia is impossible to predict.

Circular↗
USGS1992

International strategic minerals inventory summary report; zirconium

Zircon, a zirconium silicate, is currently the most important commercial zirconium-bearing mineral. Baddeleyite, a natural form of zirconia, is less important but has some specific end uses. Both zircon and baddeleyite occur in hard-rock and placer deposits, but at present all zircon production is from placer deposits. Most baddeleyite production is from hard-rock deposits, principally as a byproduct of copper and phosphate-rock mining. World zirconium resources in identified, economically exploitable deposits are about 46 times current production rates. Of these resources, some 71 percent are in South Africa, Australia, and the United States. The principal end uses of zirconium minerals are in ceramic applications and as refractories, abrasives, and mold linings in foundries. A minor amount, mainly of zircon, is used for the production of hafnium-free zirconium metal, which is used principally for sheathing fuel elements in nuclear reactors and in the chemical-processing industry, aerospace engineering, and electronics. Australia and South Africa are the largest zircon producers and account for more than 70 percent of world output; the United States and the Soviet Union account for another 20 percent. South Africa accounts for almost all the world's production of baddeleyite, which is about 2 percent of world production of contained zirconia. Australia and South Africa are the largest exporters of zircon. Unless major new deposits are developed in countries that have not traditionally produced zircon, the pattern of world production is unlikely to change by 2020. The proportions, however, of production that come from existing producing countries may change somewhat.

Circular↗
USGS1993

International strategic minerals inventory summary report; niobium (columbium) and tantalum

Major world resources of niobium and tantalum are described in this summary report of information in the International Strategic Minerals Inventory (ISMI). ISMI is a cooperative data-collection effort of earth-science and mineral-resource agencies in Australia, Canada, the Federal Republic of Germany, the Republic of South Africa, the United Kingdom, and the United States of America. Part I of this report presents an overview of the resources and potential supply of niobium and tantalum based on inventory information; Part II contains tables of both geologic and mineral-resource information and includes production data collected by ISMI participants. Niobium is used principally as an alloying element in special steels and superalloys, and tantalum is used mainly in electronics. Minerals in the columbite-tantalite series are principal ore minerals of niobium and tantalum. Pyrochlore is a principal source of niobium. These minerals are found in carbonatite, certain rocks in alkaline igneous complexes, pegmatite, and placer deposits. ISMI estimates show that there are over 7 million metric tons of niobium and almost 0.5 million metric tons of tantalum in known deposits, outside of China and the former Soviet Union, for which reliable estimates have been made. Brazilian deposits, followed by Canadian deposits, contain by far the largest source of niobium. Tantalum production is spread widely among several countries, and Brazil and Canada are the most significant of these producers. Brazil's position is further strengthened by potential byproduct columbite from tin mining. Present economically exploitable resources of niobium appear to be sufficient for the near future, but Brazil will continue to be the predominant world supplier of ferrocolumbium. Tantalum, a byproduct of tin production, has been captive to the fluctuations of that market, but resources in pegmatite in Canada and Australia make it likely that future increases in the present modest demand will be met.

Circular↗
USGS1984

Interlaboratory comparison of mineral constituents in a sample from the Herrin (No. 6) coal bed from Illinois

Approximately 20 kg of the Herrin (No. 6) coal was collected from a strip mine in St. Clair County, Ill. A 10-kg portion was ground to -60 mesh, homogenized, and riffled into 128 splits of 70-80 g each. Homogeneity of these splits was confirmed by moisture, ash, and sulfur analyses of six randomly selected splits. Results of these analyses were within the ASTM (American Society for Testing and Materials) guidelines for interlaboratory precision. Splits of the Herrin (No. 6) coal were then transmitted to more than 30 laboratories for analysis. Low-temperature plasma oxidation was used to isolate inorganic matter for quantitative chemical and mineralogical analysis. Despite a wide variation in ashing conditions, only minor variations in ash yields were obtained; these variations were attributed to differences in operating temperature and moisture content. Mineralogical analyses of low-temperature ash (LTA) concentrates prepared by five different laboratories indicated variations within the limits of analytical error. The mean values, in weight percent, for the major minerals are as follows: calcite, 9; quartz, 20; pyrite, 23; kaolinite, 14; and illite+mixed-layer clays, 31. Normative mineralogical calculations and Fourier transform infrared analysis (FTIR) yielded results similar to those obtained from X-ray diffraction (XRD). Choosing appropriate mineral standards was found to be critical for the proper use of analytical techniques such as XRD and FTIR. Good interlaboratory agreement was obtained for most major, minor, and trace elements despite differences in analytical procedures and in the type of sample analyzed (coal, high-temperature ash, or LTA). Discrepancies between analyses for zinc, strontium, manganese, and iron may be attributed to sampling inhomogeneity problems. Mossbauer spectroscopy showed that approximately 44 percent of the pyritic sulfur was lost through weathering in the first year after preparation of the interlaboratory sample. Szomolnokite and possibly coquimbite and jarosite were also identified. Scanning electron microscopy studies indicated ubiquitous pyrite framboids and, less commonly, euhedral crystals, skeletal grains, irregularly shaped particles, and vein fillings. Minor accessory minerals such as rare-earth phosphates and possibly silicates, zircon, barium sulfate, titanium oxide, and sphalerite were also found. The textural evidence indicates that the minerals in the banded material are detrital whereas the minerals occurring as vein and pore fillings are authigenic. Magnetic measurements indicate that coal crushed in a steel pulverizer is contaminated by small quantities of abrasion fragments from the crusher, which seriously affect the measured magnetic properties of the coal.

Circular↗