SEARCH · USGS Science

Results for “Science Advances”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources

USGS2025

Temporal and spatial comparison of coal mine ventilation methane emissions and mitigation quantified using PRISMA satellite data and on-site measurements

Emission monitoring at the facility level (bottom-up, BU) is key for accurate reporting of coal mine methane (CMM) emissions. Recent advances in aerial and satellite observations (top-down, TD) indicate that these methods have the potential to support CMM emissions monitoring and reporting of, as well as track the effectiveness of, mitigation actions. That said, studies have shown discrepancies between BU and TD estimations. Performing TD monitoring with concurrent BU measurements at the same mines may help address the observed discrepancies and improve quantification methods to narrow the gap between BU and TD data. This paper presents a comparison of concurrent BU-TD methane emission fluxes monitored from two ventilation shafts at a southwestern Virginia, USA, longwall mine to complement the existing body of studies on satellite-based monitoring of coal mines by incorporating continuous ground-based monitoring with concurrent TD monitoring of methane emission fluxes to address the gap and provide valuable insights into temporal emission patterns. The shafts were monitored on multiple dates between 2020 and 2023. BU monitoring was performed at the exhaust fans, while TD quantifications used PRISMA hyperspectral satellite data and two different wind reanalysis datasets (i.e., GEOS-FP and ERA5). This mine also offered a unique opportunity for BU-TD comparisons before and after ventilation air methane (VAM) oxidizer operation, which was installed at one of the shafts in 2022. The results showed that TD-estimated mean fluxes were generally lower than BU data, which were attributed to quantification difficulties associated with the low albedo caused by heavy vegetation and the terrain of the area. However, despite the discrepancies in mean emissions, both the interquartile range and the data range of the distributions generally overlapped, and the estimates correctly showed the emission trends.

Virginia↗

USGS2020

Methylmercury exposure in wildlife: A review of the ecological and physiological processes affecting contaminant concentrations and their interpretation

Exposure to methylmercury (MeHg) can result in detrimental health effects in wildlife. With advances in ecological indicators and analytical techniques for measurement of MeHg in a variety of tissues, numerous processes have been identified that can influence MeHg concentrations in wildlife. This review presents a synthesis of theoretical principals and applied information for measuring MeHg exposure and interpreting MeHg concentrations in wildlife. Mercury concentrations in wildlife are the net result of ecological processes influencing dietary exposure combined with physiological processes that regulate assimilation, transformation, and elimination. Therefore, consideration of both physiological and ecological processes should be integrated when formulating biomonitoring strategies. Ecological indicators, particularly stable isotopes of carbon, nitrogen, and sulfur, compound-specific stable isotopes, and fatty acids, can be effective tools to evaluate dietary MeHg exposure. Animal species differ in their physiological capacity for MeHg elimination, and animal tissues can be inert or physiologically active, act as sites of storage, transformation, or excretion of MeHg, and vary in the timing of MeHg exposure they represent. Biological influences such as age, sex, maternal transfer, and growth or fasting are also relevant for interpretation of tissue MeHg concentrations. Wildlife tissues that represent current or near-term bioaccumulation and in which MeHg is the predominant mercury species (such as blood and eggs) are most effective for biomonitoring ecosystems and understanding landscape drivers of MeHg exposure. Further research is suggested to critically evaluate the use of keratinized external tissues to measure MeHg bioaccumulation, particularly for less-well studied wildlife such as reptiles and terrestrial mammals. Suggested methods are provided to effectively use wildlife for quantifying patterns and drivers of MeHg bioaccumulation over time and space, as well as for assessing the potential risk and toxicological effects of MeHg on wildlife.

Science of the Total Environment↗

USGS2016

Evaluation of gas production potential from gas hydrate deposits in National Petroleum Reserve Alaska using numerical simulations

An evaluation of the gas production potential of Sunlight Peak gas hydrate accumulation in the eastern portion of the National Petroleum Reserve Alaska (NPRA) of Alaska North Slope (ANS) is conducted using numerical simulations, as part of the U.S. Geological Survey (USGS) gas hydrate Life Cycle Assessment program. A field scale reservoir model for Sunlight Peak is developed using Advanced Processes & Thermal Reservoir Simulator (STARS) that approximates the production design and response of this gas hydrate field. The reservoir characterization is based on available structural maps and the seismic-derived hydrate saturation map of the study region. A 3D reservoir model, with heterogeneous distribution of the reservoir properties (such as porosity, permeability and vertical hydrate saturation), is developed by correlating the data from the Mount Elbert well logs. Production simulations showed that the Sunlight Peak prospect has the potential of producing 1.53 × 10 9 ST m 3 of gas in 30 years by depressurization with a peak production rate of around 19.4 × 10 4 ST m 3 /day through a single horizontal well. To determine the effect of uncertainty in reservoir properties on the gas production, an uncertainty analysis is carried out. It is observed that for the range of data considered, the overall cumulative production from the Sunlight Peak will always be within the range of ±4.6% error from the overall mean value of 1.43 × 10 9 ST m 3 . A sensitivity analysis study showed that the proximity of the reservoir from the base of permafrost and the base of hydrate stability zone (BHSZ) has significant effect on gas production rates. The gas production rates decrease with the increase in the depth of the permafrost and the depth of BHSZ. From the overall analysis of the results it is concluded that Sunlight Peak gas hydrate accumulation behaves differently than other Class III reservoirs (Class III reservoirs are composed of a single layer of hydrate with no underlying zone of mobile fluids) due to its smaller thickness and high angle of dip.

Alaska↗

USGS2015

A tribute to George Plafker

In a long and distinguished career, George Plafker made fundamental advances in understanding of megathrust tectonics, tsunami generation, paleoseismology, crustal neotectonics, an d Alaskan geology, chiefly by means of geological field observations. George discovered that giant earthquakes result from tens of meters of seismic slip on subduction megathrusts, and he did this before the theory of plate tectonics h ad become a paradigm. The discovery was founded on George's comprehensive mapping of land-level changes in the aftermath of the 1964 earthquake in Alaska, and on his follow-up mapping, in 1968, in the region of the 1960 earthquakes in Chile. The mapping showed paired, parallel belts of coseismic uplift largely offshore and coseismic subsidence mo stly onshore – a pattern now familiar as the initial condition assumed in simulations of subduction-zone tsu namis. George recognized, moreover, that splay faulting can play a major role in tsunami generation, and he also distinguished carefully between tectonic and landslide sources for the multiple tsunamis that accounted for nearly all the fatalities associated with the 1964 Alaska earthquake. George's classic monographs on the 1964 earthquake include findings on subduction-zone paleoseismology that he soon extended to include stratigraphic evidence for cyclic vertical deformation at the Copper River Delta, as well as recurrent uplift evidenced by flights of marine terraces at Middleton Island. As a geologist of earthquakes, George also clarified the tectonics and hazards of crustal faulting in Alaska, California, and other areas worldwide. All the while, George was mapping bedrock geol ogy in Alaska, where he contributed importantly to today's understanding of how terranes were accreted and modified. Especially important was his documentation of the origin, movement, subduction, and collision of the Yakutat terrane in southern Alaska.

Quaternary Science Reviews↗

USGS2017

Methods for measuring bird-mediated seed rain: Insights from a Hawaiian mesic forest

Amount and diversity of bird-dispersed seed rain play important roles in determining forest composition, yet neither is easy to quantify. The complex ecological processes that influence seed movement make the best approach highly context specific. Although recent advances in seed rain theory emphasize quantifying source-specific seed shadows, many ecological questions can be addressed u sing a less mechanistic approach that requires fewer assumptions. Using seed rain rates from 0.38 m 2 hoop traps sampled twice monthly over the course of a year, we show that number of traps required to identify changes in seed rain varies across seed species and forest type. Detecting a 50% increase in amount of seed rain required from 65 to >300 traps, while detecting a 200% increase generally required ≤⃒50 traps. Trap size and ecological context dictate the number of seeds found in each trap, but the coefficient of variation (CV) across traps in a given ecological context can help inform future studies about number of traps needed to detect change. To better understand factors influencing variation around estimates of seed rain, we simulated both clustered and evenly distributed patterns of fecal deposition using three different levels of seed aggregation (number of seeds in each fecal deposit). When patterns of fecal deposition were clustered, rather than evenly dispersed across the study area, they required >1.5 times the number of traps to identify a 100% increase in seed rain. Similarly, we found that low seed aggregation required >1.5 times the number of traps to detect a 100% change than when aggregation was medium or high. At low aggregations, fewer seed rain traps contained seeds (low, 33 ± 5%; medium, 23 ± 4%; high, 24 ± 5%), resulting in more variation across traps than medium and high aggregations. We also illustrate the importance of training observers to discern between morphologically similar seeds from different species and provide resources to help identify bird-dispersed seeds commonly found within midelevation mesic Hawaiian forests.

Hawaii↗

USGS2024

Analysis and review of fishery-dependent data for Hawaiian nearshore noncommercial fisheries

Noncommercial, shore-based fisheries provide economic, social, and cultural services to communities throughout the Hawaiian Islands. The State of Hawai‘i Department of Land and Natural Resources (DLNR), Division of Aquatic Resources (DAR) routinely conducts surveys to monitor noncommercial fisheries such that estimates of fishing effort and catch by gear type can be generated and used to implement more sustainable management practices. DAR executes both the Hawai‘i Marine Recreational Fishery Survey (HMRFS), a nationally standardized survey that focuses on intercepting fishers at access points (i.e., boat ramps) across the main Hawaiian Islands, and a set of roving creel surveys on O‘ahu, Maui Nui, and Kaua‘i that observe and intercept fishers at locations along the shoreline outside of those targeted by HMRFS. The latter set of creel surveys were designed to complement HMRFS by expanding its geographic coverage and thus providing a more representative picture of noncommercial fishing in Hawai‘i. Sustainable management priorities set by DAR rely on the availability of statewide, fishery- dependent data. Thus, we collate information from island-based roving creel surveys into a cohesive Statewide Creel Survey Database. Further, we provide preliminary analyses and describe ways that surveys could be streamlined to improve future data collection, analysis, and utility. In so doing, we synthesize the most detailed information to-date about noncommercial shore-based fisheries of Hawai‘i. The unprecedented spatial and temporal coverage of DAR’s dataset reveals the value of their survey efforts over the last decade to address fishery management needs. Our primary objectives, results, and conclusions are summarized below: 1) Integrate DAR roving creel survey data from different islands into a single Statewide Creel Survey Dataset (Chapter II). We describe the collation of creel survey data from O‘ahu, Maui Nui, and Kaua‘i into a statewide dataset. We also offer ways in which these surveys could be streamlined to meet the needs of managers and decision makers. Briefly, these are to create a statewide strategic plan, standardize the execution of standard operating procedures, centralize the creel survey database and associated metadata, and consider using technology that improves the data pipeline, including transitioning from paper-based to electronic systems for data entry and processing. 2) Assess whether the new Statewide Creel Survey Dataset can provide inputs for length-based stock assessments (Chapter III). Only on Maui were interviews conducted with associated catch data. There was reasonably high taxonomic coverage (42 species from 186 interviews with 310 fishers), but low sample sizes for nearly all species precluded the development of length-based stock assessments. We provide summary statistics from the existing data and briefly discuss how technologies could be used to automate analysis of images of noncommercial catch. 3) Analyze the Statewide Creel Survey Dataset for spatial and temporal patterns in fishing effort (Chapter IV): a. Visualizing noncommercial fishing pressure . We found that fishing effort (mean number of fishers observed per survey event at a site) on O'ahu was over three times greater than that recorded during similar surveys conducted on Maui or Kaua'i. We create maps that display the distribution of angling and spearfishing effort around each of the three islands. b. Factors that predict fishing “hotspots” around Maui . Fishing effort on Maui was associated with areas with more wave power and less parking availability. There were half as many fishers in areas with parking lots than in areas with parking on the road shoulder only. c. Changes in fishing effort during the COVID-19 pandemic . There was no change in fishing effort on O‘ahu during the first year of the pandemic, but there was a 20% decline in year 2 and a 33% decline in year 3, both in comparison to pre-pandemic levels. Pre-pandemic creel survey data were unavailable for Maui and Kaua‘i, but fishing effort on these islands also declined as the pandemic progressed at similar or greater rates than those observed on O‘ahu. 4) Quantify potential bias in survey methods by experimentally deriving fisher detection probabilities of shore-based and drone-based surveys (Chapter V): a. Shore-based surveys . We conducted roving creel surveys for four months at three locations around Hilo Bay, designed to emulate and estimate the efficacy of DAR standard operating procedures. There was high agreement between paired observers in counting fishers, leading to near-perfect detection probabilities of both anglers (94%) and spearfishers (97%), but relatively low agreement and detection probabilities of other fishers (throw net, ‘opihi picking, etc.) (52%). b. Drone-based surveys . We used an unmanned aerial vehicle (UAV; operated by DAR staff) to collect imagery of fishers along the Hilo Bay shoreline. We used still images and video clips (with known fishing activity) to build an online survey that was distributed to DAR and HCFRU personnel, asking them to count and categorize resource users as a snorkeler, spearfisher, angler, or other fisher. Only 40.0% of the responses correctly counted and categorized resource users in the image. Anglers were correctly identified and enumerated in 90.0% of the responses, but the correct response rates of the other three user categories ranged from 67.8% – 79.4%. Snorkelers and anglers tended to be undercounted while spearfishers and other fishers were overcounted. 5) Review the potential for incorporating emerging technologies that will improve, augment, and evolve creel survey data collection, especially for spearfishing (Chapter VI). Within the context of monitoring shore-based noncommercial fishing, we review the use of electronic data entry/processing systems with geospatial and image capabilities, field cameras, drones, smart buoys, citizen science apps, data mining social media, artificial intelligence and machine learning. We highlight several of the challenges and considerations when implementing these technologies into creel surveys and provide a synthesis of options that could be used to better estimate spearfishing. The general conclusion of this assessment is that the DAR roving creel survey program is collecting valuable data that supplement the existing HMRFS efforts. However, there are a number of areas that could be improved to make these efforts a more effective tool for decision-making processes in resource management and conservation: 1) Establishment of clear statewide and island objectives for the Statewide Creel Survey Dataset. Currently, data collection efforts are focused towards addressing a very broad purpose – supplementing the HMRFS data collection efforts. However, the results of the preliminary analyses conducted as part of this project suggest that the data could be used to address other areas of need if these objectives were clearly defined. Further, the design of the creel survey would benefit from greater standardization of survey protocols between islands and an effort to define a) the acceptable margins of error associated with the estimates generated by these data and b) the minimum level of change that the surveys would need to detect to be useful to managers. 2) Centralization of data entry, data quality assessment, and data accessibility. Currently, each DAR office manages data entry, checks the data for errors, and is responsible for managing and storing the data. Instituting a centralized data entry system, particularly an online database that can receive survey data from tablets or smartphones running a standardized data collection application would improve efficiency, reduce data entry errors, and accelerate the availability of data to managers. A substantial amount of time and effort from the project described in this report was devoted to checking the dataset for errors. The development and application of data quality assurance protocols would ensure that the data are reliable and available in a timely fashion to support management decisions. 3) Address lingering questions regarding the efficacy of current survey protocols to capture and characterize the spearfishing component of the noncommercial fishery. The results presented in the report suggest that the current creel survey protocols do a good job detecting spearfishers when present but are not capturing sufficient data about their catch or total effort. There are also questions remaining as to whether the survey times and sites are sufficiently capturing the behavior of spearfishers in Hawai‘i. A more thorough assessment – whether through additional research, alteration of survey design, or review of data by representatives of the spearfishing community – would provide insight on how to use the Statewide Creel Survey Database to inform management of spearfishing. 4) Investigate the integration of technological advancements into the creel survey methods. As priorities and needs are developed and formalized, it would be valuable to consider how various technological advancements might enhance and streamline data collection or open new avenues of inquiry.

Hawaii↗

USGS2022

Implementation of the CCDC algorithm to produce the LCMAP Collection 1.0 annual land surface change product

The increasing availability of high-quality remote sensing data and advanced technologies have spurred land cover mapping to characterize land change from local to global scales. However, most land change datasets either span multiple decades at a local scale or cover limited time over a larger geographic extent. Here, we present a new land cover and land surface change dataset created by the Land Change Monitoring, Assessment, and Projection (LCMAP) program over the conterminous United States (CONUS). The LCMAP land cover change dataset consists of annual land cover and land cover change products over the period 1985-2017 at 30-meter resolution using Landsat and other ancillary data via the Continuous Change Detection and Classification (CCDC) algorithm. In this paper, we describe our novel approach to implement the CCDC algorithm to produce the LCMAP product suite composed of five land cover and five land surface change related products. The LCMAP land cover products were validated using a collection of ~ 25,000 reference samples collected independently across CONUS. The overall agreement for all years of the LCMAP primary land cover product reached 82.5%. The LCMAP products are produced through the LCMAP Information Warehouse and Data Store (IW+DS) and Shared Mesos Cluster systems that can process, store, and deliver all datasets for public access. To our knowledge, this is the first set of published 30m annual land cover and land cover change datasets that span from the 1980s to the present for the United States. The LCMAP product suite provides useful information for land resource management and facilitates studies to improve the understanding of terrestrial ecosystems and the complex dynamics of the Earth system. The LCMAP system could be implemented to produce global land change products in the future.

Earth System Science Data↗

USGS2023

Volcanic earthquake catalog enhancement using integrated detection, matched-filtering, and relocation tools

Volcanic earthquake catalogs are an essential data product used to interpret subsurface volcanic activity and forecast eruptions. Advances in detection techniques (e.g., matched-filtering, machine learning) and relative relocation tools have improved catalog completeness and refined event locations. However, most volcano observatories have yet to incorporate these techniques into their catalog-building workflows. This is due in part to complexities in operationalizing, automating, and calibrating these techniques in a satisfactory way for disparate volcano networks and their varied seismicity. In an effort to streamline the integration of catalog-enhancing tools at the Alaska Volcano Observatory (AVO), we have integrated four popular open-source tools: REDPy, EQcorrscan, HypoDD, and GrowClust. The combination of these tools offers the capability of adding seismic event detections and relocating events in a single workflow. The workflow relies on a combination of standard triggering and cross-correlation clustering (REDPy) to consolidate representative templates used in matched-filtering (EQcorrscan). The templates and their detections are then relocated using the differential time methods provided by HypoDD and/or GrowClust. Our workflow also provides codes to incorporate campaign data at appropriate junctures, and calculate magnitude and frequency index for valid events. We apply this workflow to three datasets: the 2012–2013 seismic swarm sequence at Mammoth Mountain (California), the 2009 eruption of Redoubt Volcano (Alaska), and the 2006 eruption of Augustine Volcano (Alaska); and compare our results with previous studies at each volcano. In general, our workflow provides a significant increase in the number of events and improved locations, and we relate the event clusters and temporal progressions to relevant volcanic activity. We also discuss workflow implementation best practices, particularly in applying these tools to sparse volcano seismic networks. We envision that our workflow and the datasets presented here will be useful for detailed volcano analyses in monitoring and research efforts.

Alaska↗

USGS2009

Ecological Requirements for Pallid Sturgeon Reproduction and Recruitment in the Lower Missouri River: A Research Synthesis 2005-08

This report provides a synthesis of results obtained between 2005 and 2008 from the Comprehensive Sturgeon Research Program, an interagency collaboration between the U.S. Geological Survey, Nebraska Game and Parks Commission, U.S. Fish and Wildlife Service, and the U.S. Army Corps of Engineers' Missouri River Recovery - Integrated Science Program. The goal of the Comprehensive Sturgeon Research Program is to improve fundamental understanding of reproductive ecology of the pallid sturgeon with the intent that improved understanding will inform river and species management decisions. Specific objectives include: *Determining movement, habitat-use, and reproductive behavior of pallid sturgeon; *Understanding reproductive physiology of pallid sturgeon and relations to environmental conditions; *Determining origin, transport, and fate of drifting pallid sturgeon larvae, and evaluating bottlenecks for recruitment of early life stages; *Quantifying availability and dynamics of aquatic habitats needed by pallid sturgeon for all life stages; and *Managing databases, integrating understanding, and publishing relevant information into the public domain. Management actions to increase reproductive success and survival of pallid sturgeon in the Lower Missouri River have been focused on flow regime, channel morphology, and propagation. Integration of 2005-08 Comprehensive Sturgeon Research Program research provides insight into linkages among flow regime, re-engineered channel morphology, and pallid sturgeon reproduction and survival. The research approach of the Comprehensive Sturgeon Research Program integrates opportunistic field studies, field-based experiments, and controlled laboratory studies. The field study plan is designed to explore the role of flow regime and associated environmental cues using two complementary approaches. An upstream-downstream approach compares sturgeon reproductive behavior between an upstream section of the Lower Missouri River with highly altered flow regime to a downstream section that maintains much of its pre-regulation flow variability. The upstream section also has the potential for an experimental approach to compare reproductive behavior in years with pulsed flow modifications ('spring rises') to years without. The reproductive cycle of the female sturgeon requires several years to progress through gonadal development, oocyte maturation, and spawning. Converging lines of evidence support the hypothesis that maturation and readiness to spawn in female sturgeon is cued many months before spawning. Information on reproductive readiness of shovelnose sturgeon indicates that sturgeon at different locations along the Lower Missouri River between St. Louis and Gavins Point Dam are all responding to the same early cue. Although not a perfect surrogate, the more abundant shovelnose sturgeon is morphologically, physiologically, and genetically similar to pallid sturgeon, and thereby provides a useful comparative model for the rarer species. Day length is the likely candidate to define a temporal spawning window. Within the spawning window, one or more additional, short-term, and specific cues may serve to signal ovulation and release of gametes. Of three potential spawning cues - water temperature, water discharge, and day of year - water temperature is the most likely proximate cue because of the fundamental physiological role temperature plays in sturgeon embryo development and survival, and the sensitivity of many fish hormones to temperature change. It also is possible that neither temperature nor discharge is cueing spawning; instead, reproductive behavior may result from the biological clock advancing an individual fish's readiness to spawn day after day through the spawning period until the right moment, independent of local environmental conditions. Separation of the individual effects of discharge events, water temperature, and other possible factors, such as proximity to male

Scientific Investigations Report↗

USGS2022

Implementing landscape connectivity with topographic filtering model: A simulation of suspended sediment delivery in an agricultural watershed

The widespread availability of high-fidelity topography combined with advances in geospatial analysis offer the opportunity to reimagine approaches to the difficult problem of predicting sediment delivery from watersheds. Here we present a model that uses high-resolution topography to filter sediment sources to quantify sediment delivery to the watershed outlet. It is a reduced-complexity, top-down model that defines transfer functions—topographic filters—between spatially distributed sediment sources and spatially integrated sediment delivery. The goal of the model is to forecast changes in watershed suspended sediment delivery in response to spatially distributed changes in sediment source magnitude or delivery, whether a result of watershed drivers or intentional management actions. Such an application requires the context of a watershed model that accounts for all sediment sources, enforces sediment mass balance throughout the spatial domain, and accommodates sediment storage and delivery over time. The model is developed for a HUC-8 watershed with a flat upland dominated by corn-soybean agriculture and deeply incised valleys near the watershed outlet with large sediment contributions from near-channel sources. Topofilter computes delivery and storage of field-derived sediment according to its spatial and structural connectivity to the stream channel network; subsequently, delivery of both field- and near-channel-derived sediment along with floodplain storage are computed in the stream channel network to the watershed outlet. The model outputs provide a spatially rich representation of sediment delivery and storage on field and along the stream that is consistent with available independent information on sediment accumulations and fluxes. Rather than a single best-calibrated solution, Topofilter uses the Generalized Likelihood Uncertainty Estimate (GLUE) approach to develop many possible solutions with sediment delivery rates expressed as probability distributions across the watershed. The ensemble of simulation outputs provides a useful basis for estimating uncertainty in sediment delivery and the effectiveness of different landscape management allocation across a watershed.

Minnesota↗

USGS2025

Toward co-designed Earth System Models: Reflecting end-user priorities in local applications from a modeler's perspective

Earth System Models (ESM) are crucial for quantifying climate impacts across Earth's interconnected systems and supporting science-based adaptation and mitigation. However, not including end-users, especially decision-makers representing communities vulnerable to climate change, can limit model utility, increase epistemic risks, and lead to information misuse in decision-making. While the ESM community increasingly values broad community engagement, end-users may not initially perceive models as useful for local planning. Co-designing models with end-users fosters two-way learning: users better understand models and their outputs, while modelers gain insights into fine-scale local processes like monitoring practices and management priorities. Higher-level co-design can lead to more customized, priority-driven, and useful modeling products. Despite these benefits, modelers often struggle to initiate meaningful partnerships with local communities. Therefore, this paper explores model co-design from the perspective of modelers. This study presents two case studies where modelers and social scientists collaborated with Indigenous communities' decision-makers to reflect their priorities in model design and application. In the Arctic Rivers Project, high-resolution climate and hydrology data sets for Alaska were developed with guidance from an Indigenous Advisory Council, using optimized, coupled land-atmosphere models. In the Mid-Klamath Project, we partnered with the Karuk Tribe's Department of Natural Resources to assess climate change and prescribed burning impacts on terrestrial hydrology in the Klamath River Basin. Drawing from these studies, we introduce a four-level framework: (a) Co-design Configuration; (b) Model Tuning; (c) Incorporate Contextual Knowledge; (d) Co-develop New Model Functions. We aim to help researchers consider and compare co-design across diverse modeling projects systematically and coherently.

Alaska, California, Oregon↗

USGS2019

Try, try again: Lessons learned from success and failure in participatory modeling

Participatory Modeling (PM) is becoming increasingly common in environmental planning and conservation, due in part to advances in cyberinfrastructure as well as to greater recognition of the importance of engaging a diverse array of stakeholders in decision making. We provide lessons learned, based on over 200 years of the authors’ cumulative and diverse experience, about PM processes. These include successful and, perhaps more importantly, not-so-successful trials. Our collective interdisciplinary background has supported the development, testing, and evaluation of a rich range of collaborative modeling approaches. We share here what we have learned as a community of participatory modelers, within three categories of reflection: a) lessons learned about participatory modelers; b) lessons learned about the context of collaboration; and c) lessons learned about the PM process. First, successful PM teams encompass a variety of skills beyond modeling expertise. Skills include: effective relationship-building, openness to learn from local experts, awareness of personal motivations and biases, and ability to translate discussions into models and to assess success. Second, the context for collaboration necessitates a culturally appropriate process for knowledge generation and use, for involvement of community co-leads, and for understanding group power dynamics that might influence how people from different backgrounds interact. Finally, knowing when to use PM and when not to, managing expectations, and effectively and equitably addressing conflicts is essential. Managing the participation process in PM is as important as managing the model building process. We recommend that PM teams consider what skills are present within a team, while ensuring inclusive creative space for collaborative exploration and learning supported by simple yet relevant models. With a realistic view of what it entails, PM can be a powerful approach that builds collective knowledge and social capital, thus helping communities to take charge of their future and address complex social and environmental problems.

Elementa: Science of the Anthropocene↗

USGS2020

Earthquake early warning in Aotearoa New Zealand: A survey of public perspectives to guide warning system development

Earthquake early warning (EEW) can be used to detect earthquakes and provide advanced notification of strong shaking, allowing pre-emptive actions to be taken that not only benefit infrastructure but reduce injuries and fatalities. Currently Aotearoa New Zealand does not have a nationwide EEW system, so a survey of the public was undertaken to understand whether EEW was considered useful and acceptable by the public, as well as perceptions of how and when such warnings should be communicated, before making an investment in such technology. We surveyed the public’s perspectives ( N = 3084) on the usefulness of EEW, preferred system attributes, and what people anticipated doing on receipt of a warning. We found strong support for EEW, for the purposes of being able to undertake actions to protect oneself and others (e.g. family, friends, and pets), and to mentally prepare for shaking. In terms of system attributes, respondents expressed a desire for being warned at a threshold of shaking intensity MM5–6. They suggested a preference for receiving a warning via mobile phone, supported by other channels. In addition to being warned about impending shaking, respondents wanted to receive messages that alerted them to other attributes of the earthquake (including the possibility of additional hazards such as tsunami), and what actions to take. People’s anticipated actions on receipt of a warning varied depending on the time available from the warning to arrival of shaking. People were more likely to undertake quicker and easier actions for shorter timeframes of <10 s (e.g., stop, mentally prepare, take protective action), and more likely to move to a nearby safe area, help others, look for more information, or take safety actions as timeframes increased. Given the public endorsement for EEW, information from this survey can be used to guide future development in Aotearoa New Zealand and internationally with respect to system attributes, sources, channels and messages, in ways that promote effective action.

Humanities & Social Sciences Communications↗

USGS2005

The Circumpolar Arctic vegetation map

Question: What are the major vegetation units in the Arctic, what is their composition, and how are they distributed among major bioclimate subzones and countries? Location: The Arctic tundra region, north of the tree line. Methods: A photo-interpretive approach was used to delineate the vegetation onto an Advanced Very High Resolution Radiometer (AVHRR) base image. Mapping experts within nine Arctic regions prepared draft maps using geographic information technology (ArcInfo) of their portion of the Arctic, and these were later synthesized to make the final map. Area analysis of the map was done according to bioclimate subzones, and country. The integrated mapping procedures resulted in other maps of vegetation, topography, soils, landscapes, lake cover, substrate pH, and above-ground biomass. Results: The final map was published at 1:7 500 000 scale map. Within the Arctic (total area = 7.11 x 106 km 2), about 5.05 ?? 106 km2 is vegetated. The remainder is ice covered. The map legend generally portrays the zonal vegetation within each map polygon. About 26% of the vegetated area is erect shrublands, 18% peaty graminoid tundras, 13% mountain complexes, 12% barrens, 11% mineral graminoid tundras, 11% prostrate-shrub tundras, and 7% wetlands. Canada has by far the most terrain in the High Arctic mostly associated with abundant barren types and prostrate dwarf-shrub tundra, whereas Russia has the largest area in the Low Arctic, predominantly low-shrub tundra. Conclusions: The CAVM is the first vegetation map of an entire global biome at a comparable resolution. The consistent treatment of the vegetation across the circumpolar Arctic, abundant ancillary material, and digital database should promote the application to numerous land-use, and climate-change applications and will make updating the map relatively easy. ?? IAVS; Opulus Press.

Journal of Vegetation Science↗

USGS2023

Extrusion tectonism of Indochina reassessed: constraints from 40Ar/39Ar geochronology from the Day Nui Con Voi metamorphic massif, Vietnam

The extrusion tectonic model for the southeastern margin of the Himalayan orogeny links the crustal shear activity along the Red River Shear Zone (RRSZ) to the opening of the South China Sea (SCS). The Day Nui Con Voi (DNCV) metamorphic massif in northern Vietnam strikes NW-SE, is bounded by the RRSZ to the south and continues along the strike where it meets the SCS. The DNCV is thus a critical area to document thermotectonic history in order to advance our understanding of the tectonic evolution of Indochina extrusion and its relationship to the opening of the SCS. Our new 40 Ar/ 39 Ar data combined with microstructural and petrological analyses constrained the timing of the left-lateral shearing of the RRSZ and revealed the thermal evolution of the DNCV metamorphic massif. Three ductile deformation events were observed. D 1 formed NNW-SSE striking upright folds under granulite to upper amphibolite facies conditions. D 2 was a horizontal to sub-horizontal folding event that occurred at amphibolite facies conditions. D 3 was a doming event that formed NW-SE striking up-right folds bounded by left-lateral shearing mylonite belts along the two limbs. The S/C fabrics were defined by muscovite fish, quartz + albite + K-feldspar aggregates, and muscovite folia. The D 3 doming event exhumed the DNCV metamorphic massif from amphibolite facies conditions to the lower greenschist facies conditions. The 40 Ar/ 39 Ar ages obtained from amphibole (∼26 Ma), phlogopite (∼25 Ma), muscovites (∼24-23 Ma), biotite (∼25-23 Ma), and K-feldspars (∼25-22 Ma) from different structural domains of the DNCV metamorphic massif indicated a rapid exhumation ∼26–22 Ma. We interpreted this as the time period for the D 3 event, with the onset of left-lateral shearing occurring around 24 Ma based on ages obtained from syn-kinematic muscovites. This age was much younger than the initiation of sea-floor spreading of the SCS (since 32 Ma) but coincided with the age for the ridge jump event in the SCS. Based on these new data, we proposed that extrusion tectonism cannot be the cause for the initial opening of the SCS. Rather, the extrusion of the Indochina block was temporally correlative with the southward ridge jump event of the already opened SCS.

Day Nui Con Voi massif↗

USGS2009

Modeling individual animal histories with multistate capture–recapture models

Many fields of science begin with a phase of exploration and description, followed by investigations of the processes that account for observed patterns. The science of ecology is no exception, and recent decades have seen a focus on understanding key processes underlying the dynamics of ecological systems. In population ecology, emphasis has shifted from the state variable of population size to the demographic processes responsible for changes in this state variable: birth, death, immigration, and emigration. In evolutionary ecology, some of these same demographic processes, rates of birth and death, are also the determinants of fitness. In animal population ecology, the estimation of state variables and their associated vital rates is especially problematic because of the difficulties in sampling such populations and detecting individual animals. Indeed, early capture–recapture models were developed for the purpose of estimating population size, given the reality that all animals are not caught or detected at any sampling occasion. More recently, capture–recapture models for open populations were developed to draw inferences about survival in the face of these same sampling problems. The focus of this paper is on multi‐state mark–recapture models (MSMR), which first appeared in the 1970s but have undergone substantial development in the last 15 years. These models were developed to deal explicitly with biological variation, in that animals in different “states” (classes defined by location, physiology, behavior, reproductive status, etc.) may have different probabilities of survival and detection. Animal transitions between states are also stochastic and themselves of interest. These general models have proven to be extremely useful and provide a way of thinking about a remarkably wide range of important ecological processes. These methods are now at a stage of refinement and sophistication where they can readily be used by biologists to tackle a wide range of important issues in ecology. In this paper, we draw together information on the state of the art in multistate mark–recapture methods, explaining the models and illustrating their use. We provide a modeling philosophy and a series of general principles on how to conduct analyses. We cover key issues and features, and we anticipate the ways in which we expect the models to develop in the years ahead.

Advances in Ecological Research↗

USGS2015

On the reconstruction of palaeo-ice sheets: Recent advances and future challenges

Reconstructing the growth and decay of palaeo-ice sheets is critical to understanding mechanisms of global climate change and associated sea-level fluctuations in the past, present and future. The significance of palaeo-ice sheets is further underlined by the broad range of disciplines concerned with reconstructing their behaviour, many of which have undergone a rapid expansion since the 1980s. In particular, there has been a major increase in the size and qualitative diversity of empirical data used to reconstruct and date ice sheets, and major improvements in our ability to simulate their dynamics in numerical ice sheet models. These developments have made it increasingly necessary to forge interdisciplinary links between sub-disciplines and to link numerical modelling with observations and dating of proxy records. The aim of this paper is to evaluate recent developments in the methods used to reconstruct ice sheets and outline some key challenges that remain, with an emphasis on how future work might integrate terrestrial and marine evidence together with numerical modelling. Our focus is on pan-ice sheet reconstructions of the last deglaciation, but regional case studies are used to illustrate methodological achievements, challenges and opportunities. Whilst various disciplines have made important progress in our understanding of ice-sheet dynamics, it is clear that data-model integration remains under-used, and that uncertainties remain poorly quantified in both empirically-based and numerical ice-sheet reconstructions. The representation of past climate will continue to be the largest source of uncertainty for numerical modelling. As such, palaeo-observations are critical to constrain and validate modelling. State-of-the-art numerical models will continue to improve both in model resolution and in the breadth of inclusion of relevant processes, thereby enabling more accurate and more direct comparison with the increasing range of palaeo-observations. Thus, the capability is developing to use all relevant palaeo-records to more strongly constrain deglacial (and to a lesser extent pre-LGM) ice sheet evolution. In working towards that goal, the accurate representation of uncertainties is required for both constraint data and model outputs. Close cooperation between modelling and data-gathering communities is essential to ensure this capability is realised and continues to progress.

Quaternary Science Reviews↗

USGS2012

The Novarupta-Katmai eruption of 1912 - Largest eruption of the twentieth century; centennial perspectives

The explosive outburst at Novarupta (Alaska) in June 1912 was the 20th century's most voluminous volcanic eruption. Marking its centennial, we illustrate and document the complex eruptive sequence, which was long misattributed to nearby Mount Katmai, and how its deposits have provided key insights about volcanic and magmatic processes. It was one of the few historical eruptions to produce a collapsed caldera, voluminous high-silica rhyolite, wide compositional zonation (51-78 percent SiO 2 ), banded pumice, welded tuff, and an aerosol/dust veil that depressed global temperature measurably. It emplaced a series of ash flows that filled what became the Valley of Ten Thousand Smokes, sustaining high-temperature metal-transporting fumaroles for a decade. Three explosive episodes spanned ~60 hours, depositing ~17 km 3 of fallout and 11±2 km 3 of ignimbrite, together representing ~13.5 km 3 of zoned magma. No observers were nearby and no aircraft were in Alaska, and so the eruption narrative was assembled from scattered villages and ship reports. Because volcanology was in its infancy and the early investigations (1915-23) were conducted under arduous expeditionary conditions, many provocative misapprehensions attended reports based on those studies. Fieldwork at Katmai was not resumed until 1953, but, since then, global advances in physical volcanology and chemical petrology have gone hand in hand with studies of the 1912 deposits, clarifying the sequence of events and processes and turning the eruption into one of the best studied in the world. To provide perspective on this century-long evolution, we describe the geologic and geographic setting of the eruption - in a remote, sparsely inhabited wilderness; we review the cultural and scientific contexts at the time of the eruption and early expeditions; and we compile a chronology of the many Katmai investigations since 1912. Products of the eruption are described in detail, including eight layers of regionwide fallout, nine packages of ash flows, and three lava domes that followed the explosive pyroclastic episodes. Changes in the proportions of coerupting rhyolite, dacite, and andesite pumice documented for the fallout and ash-flow successions, which are locally interbedded, permit close correlation of those synchronously emplaced sequences and their varied facies. Petrological correlation of the sequence of deposits near Novarupta with ash layers at Kodiak village, 170 km downwind, where three episodes of ashfall were recorded (to the hour), provides key constraints on timing of the eruptive events. Syneruptive collapse of a kilometer-deep caldera took place atop Mount Katmai, a stratovolcano centered 10 km east of the eruption site at Novarupta, owing to drainage of magma from beneath the Katmai edifice. Correlation of ~50 earthquakes recorded at distant seismic stations (including 14 shocks of magnitude 6.0 to 7.0) to fitful caldera collapse provides further constraints on eruption timing, because layers of nonjuvenile breccia and mud ejected from Mount Katmai during collapse pulses are intercalated with the pumice-fall layers from Novarupta. Structure of the Novarupta vent, a 2-km-wide depression backfilled by welded tuff and inferred to be funnel-shaped at depth, is described in detail, as is the 4-km-wide caldera at Mount Katmai. Discussions are also provided concerning: (1) the impact on global climate of the great mass of sulfur-poor but halogen-rich aerosol ejected into the atmosphere by the rhyolite-dominated eruption; (2) chemical and mineralogical effects of the fumarolic acid gases; and (3) the timing of several syneruptive landslide deposits sandwiched within the pumice-fall sequence. Secondary posteruption phenomena characterized include impounded lakes, ash-rich debris flows, phreatic craters on the ignimbrite sheet, responses of glaciers to the fallout blanket and to beheading by caldera collapse, growth of new glaciers inside the caldera, and gradual filling of the caldera lake. Structure, composition, and ages of the several andesite-dacite stratovolcanoes, closely clustered near Novarupta, all of which remain fumarolically and seismically active, are summarized. But among them only Mount Katmai extends compositionally to include basalt and rhyolite. The petrological affinities of 1912 magmas erupted at Novarupta with pre-1912 Katmai lavas are outlined, and various chemical, mineralogical, isotopic, and experimental data are assembled to construct a model of preeruptive magma storage beneath Mount Katmai. The monograph concludes by comparing the 1912 eruption with several other well-studied large explosive eruptions, 14 of them historical and 9 prehistoric. Finally, we retrospectively review the historical difficulties in understanding what had actually taken place at Katmai in 1912 and the century of progress in volcano science that has allowed most of it to be figured out.

Alaska, British Columbia, Washington, Yukon↗