USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the Air & Waste Management Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 61Linked to original sources
USGS2025

Evidence for fluid pressurization of fault zones and persistent sensitivity to injection rate beneath the Raton Basin

Subsurface wastewater injection has increased the seismicity rate within the Raton Basin over more than two decades, with the basin-wide injection rate peaked between 2009-2015. To understand the evolution of injection-induced earthquakes, we systematically analyzed 2016-2024 broadband recordings with a machine-learning-based phase picker and constructed a catalog with 95,993 earthquakes (-1≤ M L ≤4.3). We then inverted for full centroid moment tensors (CMT) for 90 M L ≥ 2 events, with a special interest in constraining the non-double-couple components via probabilistic metrics. Both relocations and CMT solutions support basement-rooted normal faults, including graben and half-graben structures. Furthermore, we observe the non-double-couple components that imply elevated pore pressure in the fault zones. An earthquake cluster emerged in the north-central basin in 2023, preceded by ~1-yr of increased injection volume from wells within 15km. Despite a basin-wide decrease in the injection volume, we highlights the persistence of seismicity that remains to sensitive to injection rates within the Raton Basin.

Colorado, New Mexico↗
USGS2025

Quantitative mineral resource assessment of lithium pegmatite deposits in the Appalachian Orogen, USA

Lithium is classified as a U.S. critical mineral commodity, and its demand is projected to drastically increase through 2040, driven by electric vehicle production and energy storage applications (IEA 2021).Most global lithium production is not in the United States increasing vulnerability to a supply disruption. The U.S. Geological Survey is actively assessing domestic lithium deposits including lithium-bearing pegmatites in the Appalachian orogen. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical, and mineral occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. Estimates were then integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was used to estimate the amount of potentially recoverable undiscovered resources. Preliminary computations for the northern Appalachians, including application of the economic filter to the median recoverable contained resource, yields 900,000 metric tons of Li 2 O that correspond to enough Li 2 O to replace 127 years of import reliance at the current rate (7,100 t Li 2 O/yr; USGS, 2025). For the southern Appalachians, preliminary computations yielded 1,430,000 metric tons of Li 2 O, which corresponds to 201 years of import reliance.

Alabama, Connecticut, Delaware, Georgia, Maine, Ma↗
USGS2026

Reassessing water availability in the Nile River Basin using satellite-based irrigation water use accounting

Existing estimates of irrigation areas and water use in the Nile River Basin vary widely and are based on inconsistent data and methodologies. This study leverages advances in remote sensing to provide an up-to-date and consistent basin-wide reassessment of water use in the Nile River Basin. Land cover and actual evapotranspiration data from 2013 to 2022 were used to quantify irrigated areas, irrigation water use, and the average naturalized water yield. Across the basin, 7.1 million hectares of irrigated land consume an average of 72.5 ± 2.6 billion cubic meters (BCM) of blue water annually. Egypt and Sudan together account for 92% of the irrigated area and 97% of the irrigation water use. The basin’s average naturalized yield, evaluated at Dongola station, is determined to be between 108 and 114.4 ± 3.2 BCM. Although conservative, this updated analysis indicates the basin’s average naturalized yield is 14%–20% higher than the previous naturalized yield estimate (95 BCM) and 29%–36% higher than the commonly cited observed flow of 84 BCM, which is frequently treated as the total basin-wide available water. Importantly, the study underscores that the 84 BCM represents flow at the Aswan gauging station after upstream consumptive uses, not the total water available in the basin under naturalized conditions. This distinction is critical for accurate water accounting, planning, and governance in this water-scarce basin. This study demonstrates the value of open-source remote sensing resources in data-scarce regions while emphasizing the need for region specific validation and bias correction for improved accuracy.

Nile River Basin↗
USGS2025

Over, under, and through: Hydrologic connectivity and the future of coastal landscape salinization

Seawater intrusion (SWI) affects coastal landscapes worldwide. Here we describe the hydrologic pathways through which SWI occurs - over land via storm surge or tidal flooding, under land via groundwater transport, and through watersheds via natural and artificial surface water channels—and how human modifications to those pathways alter patterns of SWI. We present an approach to advance understanding of spatiotemporal patterns of salinization that integrates these hydrologic pathways, their interactions, and how humans modify them. We use examples across the East Coast of the United States that exemplify mechanisms of salinization that have been reported around the planet to illustrate how hydrologic connectivity and human modifications alter patterns of SWI. Finally, we suggest a path for advancing SWI science that includes (a) deploying standardized and well-distributed sensor networks at local to global scales that intentionally track SWI fronts, (b) employing remote sensing and geospatial imaging techniques targeted at integrating above and belowground patterns of SWI, and (c) continuing to develop data analysis and model-data fusion techniques to measure the extent, understand the effects, and predict the future of coastal salinization.

Water Resources Research↗
USGS2025

Dynamic baseflow storage estimates and the role of topography, geology and evapotranspiration on streamflow recession characteristics in the Neversink Reservoir Watershed, New York

Estimates of dynamic groundwater volumes supplying baseflow to streams are important for water availability projections during extended periods of drought. The primary goals of this study were to provide dynamic storage volume estimates, inferred from streamflow recession analysis, for baseflow regimes within seven gaged catchments within the Neversink Reservoir Watershed (NRW), a critical municipal water source for New York City. Additionally, geomorphological properties, surficial geology and hydro-meteorological processes were quantified and described in relation to time and spatially variable recession behaviour and storage estimates across the NRW. To explore these relationships, we (1) evaluated seasonal trends in streamflow recession behaviour in relation to modelled potential evapotranspiration (PET) and catchment runoff rates, (2) derived empirical streamflow models for cool-season runoff using both linear and nonlinear reservoir assumptions for baseflow and (3) calculated metrics related to the geology and geomorphology of each catchment and compared these metrics to area normalised baseflow dynamic storage estimates. Results show that baseflow recession behaves as a nonlinear reservoir, and applying linear groundwater reservoir assumptions may underestimate the total dynamic storage volumes compared to what would be predicted for a nonlinear reservoir. Increases in PET caused decreases in storage conditions that resulted in increased recession rates and nonlinearity in streamflow recession during the growing season. Additionally, we found that while no single physical catchment characteristic solely predicted catchment storage dynamics, sediment volume and stream gradients were stronger predictors of normalised storage volumes than catchment surface area or surface topography alone. Within the NRW, catchments with the highest sediment volume exhibited the lowest recession rates and higher dynamic storage volumes, while the smallest catchment, mostly devoid of sediment, had the fastest recession rate and lowest dynamic storage volume.

New York↗
USGS2025

The feasibility of using lidar-derived digital elevation models for gravity data reduction

Gravity data require submeter elevation accuracy for data processing, and differential global navigation satellite system (dGNSS) equipment is commonly used to acquire three-dimensional positional data to achieve such accuracy. However, lidar (light detection and ranging) data are commonly used to develop digital elevation models (DEMs) of Earth’s surface. Therefore, using elevations from lidar-derived DEMs for gravity-data acquisition and reduction may improve field efficiency and reduce cost. This study examines the feasibility of using DEMs for gravity-data reduction by comparing dGNSS elevation data from 435 gravity stations in Michigan, Wyoming, and Colorado with their respective DEM elevations. The results show that the average difference between DEM and dGNSS elevations is 13 centimeters (cm) and that 93 percent of those differences are less than 50 cm, even in areas with steep terrain. Because an elevation discrepancy of 50 cm corresponds to an error of roughly 0.1 milligals (mGal) in the simple Bouguer gravity anomaly, the results suggest that lidar-derived DEMs are a viable source for acquiring the elevation data needed to process gravity data, thus improving both the cost and efficiency of data collection for regional surveys where an accuracy of less than 1.0 mGal is desired.

Open-File Report↗
USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗
USGS2025

Wetlands, groundwater and seasonality influence the spatial distribution of stream chemistry in a low-relief catchment

Evaluating stream water chemistry patterns provides insight into catchment ecosystem and hydrologic processes. Spatially distributed patterns and controls of stream solutes are well-established for high-relief catchments where solute flow paths align with surface topography. However, the controls on solute patterns are poorly constrained for low-relief catchments where hydrogeologic heterogeneities and river corridor features, like wetlands, may influence water and solute transport. Here, we provide a data set of solute patterns from 58 synoptic surveys across 28 sites and over 32 months in a low-relief wetland-rich catchment to determine the major surface and subsurface controls along with wetland influence across the catchment. In this low-relief catchment, the expected wetland storage, processing, and transport of solutes is only apparent in solute patterns of the smallest subcatchments. Meanwhile, downstream seasonal and wetland influence on observed chemistry can be masked by large groundwater contributions to the main stream channel. These findings highlight the importance of incorporating variable groundwater contributions into catchment-scale studies for low-relief catchments, and that understanding the overall influence of wetlands on stream chemistry requires sampling across various spatial and temporal scales. Therefore, in low-relief wetland-rich catchments, given the mosaic of above and below ground controls on stream solutes, modeling efforts may need to include both surface and subsurface hydrological data and processes.

Michigan↗
USGS2024

Hydrologic investigations and a preliminary conceptual model of the groundwater system at North Penn Area 1 Superfund Site, Souderton, Montgomery County, Pennsylvania

The U.S. Geological Survey (USGS) conducted hydrogeologic investigations, reviewed existing data, and developed a preliminary conceptual model of the groundwater system as part of technical support of the U.S. Environmental Protection Agency (EPA) at the North Penn Area 1 Superfund Site (hereafter, the NP1 Site) located within the Borough of Souderton in Montgomery County, Pennsylvania. Field work and monitoring took place during 2012–18. The area is underlain by sedimentary formations that form a fractured-rock aquifer used for drinking water and industrial supply. The EPA placed the Site on the National Priorities List in 1989, identifying tetrachloroethylene (PCE) and trichloroethylene (TCE) as contaminants of concern. During 2012–18, the USGS conducted field activities that included drilling an 82-foot (ft)-deep monitoring well (MG 2220) in 2016, reconstructing a 208-ft-deep former industrial production well (MG 668 [Granite Knitting Mill]), and collecting borehole geophysical and video logs and water levels from those and five additional wells, which ranged in depth from about 50 to 200 ft below land surface. Continuous water levels were collected during 2014–17, and a synoptic set of water levels were measured in April 2018 in the seven wells. The borehole geophysical logs (caliper, acoustic televiewer, natural gamma, single-point resistance, vertical flow, and fluid temperature and resistivity) and borehole video logs in the seven wells were evaluated to assess potential for lithologic correlation and to identify and describe water-bearing features, which included both low- and high-angle fractures and other openings oriented along dipping bedding planes, joints, or possible faults. Borehole geophysical logs collected by USGS in 1992 in a 300-ft-deep former production well near the Site were also evaluated. Few to no distinctive features were identified on geophysical logs (natural gamma and single-point resistance) that could be used for correlation, thus limiting this approach to determining local geologic structure. Extensive fracturing in the upper 62 ft of monitoring well MG 2220 indicates that the well was likely drilled through a zone of faulting, and other evidence of faulting is present in the area near the Site. Assessment of continuous water levels showed hydraulic connections among some wells as indicated by rising or falling water levels in response to changes in pumping rates at nearby wells. A map of water levels measured in April 2018 indicates potential for groundwater flow generally toward the stream to the south and southwest of the Site, but the limited water-level data are insufficient to describe vertical groundwater gradients or lateral gradients in any detail. Review of 1999–2022 volatile organic compound (VOC) monitoring data collected by the Pennsylvania Department of Environmental Protection for five monitoring wells indicates that the highest groundwater concentrations of PCE and TCE were found in samples from extraction well MG 2201 (S-1) downgradient from, and nearest to, the previously identified Site contaminant source area, and these concentrations fluctuated through time. PCE concentrations were higher than TCE concentrations in samples from all five monitoring wells and were much higher than TCE concentrations in samples from extraction well MG 2201 (S-1). Temporally variable recharge is a possible factor affecting observed fluctuations in PCE concentrations in groundwater samples from well extraction MG 2201 (S-1), as indicated by a general inverse relation between PCE concentrations and water levels in a nearby long-term observation well. The PCE concentration of 1,830 micrograms per liter (μg/L) in a May 2018 water sample from monitoring well MG 2220 was more than four times the PCE concentration of 444 μg/L in a December 2017 sample from the nearby extraction well MG 2201 (S-1), which is open to fewer fractures. Low concentrations of VOCs were measured in surface water at two stream sites downgradient from wells with the highest groundwater VOC concentrations at the Site, indicating that discharge of contaminated groundwater to the stream is likely. Development of a conceptual model of the groundwater system was constrained by limited data. In areas with no pumping, groundwater-flow directions generally are thought to be controlled by topography and geologic structure (bedding orientation) and likely to the south and southwest of the Site, with local flow directions affected by orientations of fractures, joints, and local faults. Additional investigations that could help improve the conceptual model of the groundwater system and help delineate the extent of groundwater contamination and its transport are discussed.

Pennsylvania↗
USGS2026

Multiple machine-learning estimation of groundwater levels and trends for the regional Mississippi River Valley alluvial aquifer

The Mississippi River Valley alluvial aquifer provides irrigation, public, and domestic water supplies across the south-central United States. Declining groundwater levels require improved characterization of changing conditions. Traditional potentiometric-surface mapping does not use all available water-level data or quantify uncertainty. To address these limitations, we developed a data-driven multiple machine-learning (MML) framework delivered through two open-source R packages. The covMRVAgen1 software assembles covariates to 155,960 monthly groundwater levels from 57,695 wells; the mmlMRVAgen1 software trains Cubist and Random Forest models, blends them, and makes 1-kilometer gridded predictions of monthly potentiometric surfaces for the period January 1980–December 2022. The MML approach provides a methodological foundation for region-scale spatiotemporal groundwater prediction and uncertainty quantification, generating 90-percent prediction limits with appropriate empirical coverage. Model performance is acceptable, with a root-mean-square error of about 4.2 feet, standard deviation of 24.82 feet, and a normalized Nash–Sutcliffe efficiency of 0.973.

Arkansas, Illinois, Louisiana, Mississippi, Missou↗
USGS2026

Microclimate mediates the strength and direction of avian biotic interactions

Theory predicts that that the strength and direction of species interactions can shift from being competitive in benign environments toward being facilitative in stressful environments. However, the environmental context dependency of species interactions has rarely been tested in animal communities. We capitalized on a 15-year, landscape-scale dataset, collected annually in a relatively stable old-growth forest environment to test the long-held hypothesis that the strength and direction of species interactions might be mediated by climatic conditions. It is generally accepted that competitive and facilitative interactions drive the distributions of many species. Using multi-species dynamic occupancy models applied to long-term data, we tested whether annual settlement by bird species could affect either the persistence or settlement by other phylogenetically related species, and whether these interactions are mediated by microclimate. We found that species interactions were influenced by microclimate for some, but not all avian species pairs. Related species pairs more often showed settlement dynamics that were indicative of attraction rather than repulsion. In some cases, competitive interactions at warmer microclimates flipped to become facilitative in colder ones. However, the reverse was also true: facilitative interactions amplified for some species under warm conditions. Furthermore, species pairs that were closely related were more likely to exhibit competitive relationships along at least part of the microclimatic gradient. Our results highlight the importance of using long-term data to incorporate competitive and facilitative interactions into species distribution models and support the notion that the strength and direction of species interactions can be dependent on microclimatic environmental conditions.

Oregon↗
USGS2026

New measurements indicate that natural geologic methane emissions from microseepage in the Michigan Basin are likely negligible

The magnitude of natural geologic methane (CH 4 ) emissions to the atmosphere (including emissions of fossil CH 4 from offshore and onshore gas and oil seeps, diffuse microseepage, mud volcanoes, volcanic vents, and geothermal areas) is highly uncertain. The largest component of geologic emissions is thought to be microseepage, which is the diffuse flux of CH 4 from soils across large areas of productive hydrocarbon basins. The accuracy of existing bottom-up estimates of microseepage is limited by low spatial coverage of published microseepage measurements. We present the first soil—atmosphere CH 4 flux measurements from Michigan Basin, USA. Results from 335 measurements taken during summer and winter seasons across a large portion of the basin suggest microseepage is nonexistent in the sampled region. Even areas with predictive features for microseepage (e.g., underlying mature, organically rich source rocks, proven gas accumulations, faults, and lineaments) yield null or negative fluxes, suggesting that CH 4 emissions from microseepage are negligible throughout our study region. A Monte Carlo method was used to place an upper limit on the regional-mean microseepage flux, in which synthetic patchy microseepage distributions were generated and tested against our observations to assess the impact of possible emission hot spots that were missed by our sampling strategy. Our analysis finds it is very unlikely that regional-mean emissions are as high as assumed in a previous global microseepage study. The observed lack of seepage may be explained by groundwater flow, active methanotrophy, glacial sediments, and bedded salt deposits, which could inhibit vertical gas migration and release to atmosphere.

Michigan↗
USGS2024

Agricultural tile drains increase the susceptibility of streams to longer and more intense streamflow droughts

Streamflow droughts are receiving increased attention worldwide due to their impact on the environment and economy. One region of concern is the Midwestern United States, whose agricultural productivity depends on subsurface pipes known as tile drains to improve trafficability and soil conditions for crop growth. Tile drains accomplish this by rapidly transporting surplus soil moisture and shallow groundwater from fields, resulting in reduced watershed storage. However, no work has previously examined the connection between tile drainage and streamflow drought. Here, we pose the question: does the extent of watershed-level tile drainage lead to an increased susceptibly and magnitude of streamflow droughts? To answer this, we use daily streamflow data for 122 watersheds throughout the Midwestern United States to quantify streamflow drought duration, frequency, and intensity. Using spatial multiple regression models, we find that agricultural tile drainage generates statistically significant ( p < 0.05) increases in streamflow drought duration and intensity while significantly reducing drought frequency. The magnitude of the effect of tile drainage on streamflow drought characteristics is similar to that of water table depth and precipitation seasonality, both of which are known to influence streamflow droughts. Furthermore, projected changes in regional precipitation characteristics will likely drive the installation of additional tile drainage. We find that for each 10% increase in tile-drained watershed area, streamflow drought duration and intensity increase by 0.03 d and 12%, respectively, while frequency decreases by 0.10 events/year. Such increases in tile drainage may lead to more severe streamflow droughts and have a detrimental effect on the socio-environmental usage of streams throughout the Midwest.

Illinois, Indiana, Iowa, Michigan, Minnesota, Ohio↗
USGS2026

In-situ geochronology using LA-ICP-MS/MS: Application of the Lu-Hf system in carbonate, apatite and fluorite

Geochronology is a fundamental tool for reconstructing earth history and constraining the timing of ore deposit formation. Traditionally, U-rich minerals like zircon, titanite, monazite and apatite have been analysed to determine the timing of mineralization and alteration events. However, not all deposits or alteration assemblages contain these minerals, and the U-Pb system can be disturbed due to open system behaviour. We present a methodology for obtaining in-situ Lu-Hf dates from various minerals to demonstrate the potential for dating ore deposits that lack U-rich minerals. Carbonate, apatite and fluorite minerals from different tectonic settings and geological environments were analysed. We acquired Lu-Hf and REE (rare earth element) data from carbonate minerals from a carbonatite orebody and dike samples from the Mountain Pass REE carbonatite deposit in California, USA. We also tested a ‘double-dating’ method, where U-Th-Pb dates and Lu-Hf dates were obtained from the same analysis of apatite from rocks in the Michigan’s Great Lakes Tectonic Zone. Preliminary results for Lu-Hf dating of fluorite from carbonatite rocks in the Lemitar Mountains of New Mexico are also included. The analytical methodology shows promising results in each of these cases where there is sufficient parent Lu and U and measurable daughter Hf and Pb respectively.

Conference Paper↗
USGS2026

Multiple-well monitoring site adjacent to the Midway- Sunset and Buena Vista Oil Fields, Kern County, California

Groundwater quality in and around oil fields in the Southern San Joaquin Valley is of interest to many California residents that rely heavily on groundwater for domestic, commercial, and agricultural use. To help assess the effects of historical oil-field activities and natural geologic sources on groundwater near the southwest margins of the Kern County Groundwater Subbasin, a multiple-well monitoring site was installed near the administrative boundary between the Midway-Sunset and Buena Vista Oil Fields in Kern County, California. The installation of the Midway-Sunset Buena Vista multiple-well monitoring site (MSBV) supports regional analysis of the relations of oil and gas sources to groundwater quality by providing information about the geology, hydrology, geophysical properties, and water quality of the alluvial and upper Tulare aquifers in areas where groundwater data were limited. Data collected from the site included drill cuttings, whole core samples, sidewall core samples, mud-gas analysis, borehole geophysical logs, depth to water measurements, and water quality samples. Whole cores were scanned using dual energy computed tomography. Subsamples of selected cores were analyzed for density, porosity, specific retention, and bulk minerology. Thin sections of the subsamples were prepared, photographed, and examined. Two samples were analyzed using scanning electron microscope technology to examine the microporosity of diatomite laden sediment. Instrumentation installed in the wells collect hourly depth to water measurements. Analysis of the data show there is 355 feet of alluvium overlying the Tulare Formation at the well site. The contact between the two formations is an aquitard resulting in a perched aquifer in the alluvium and unconfined aquifer in the Tulare Formation. The alluvium is more heterogenous and finer grained than the Tulare Formation resulting in markedly higher porosity in the alluvium compared to the Tulare Formation. Higher specific retention observed in the alluvium is attributed to the finer grained sediment and greater abundance of reworked diatomite (as represented by opal-CT [cristobalite-tridymite]) compared to the Tulare Formation. Total dissolved solids (TDS) approached or exceeded 10,000 milligrams per liter (mg/L) in the alluvium from approximately 176 to 242 feet below land surface and at the top of the Amnicola clay at approximately 670 feet below land surface within the Tulare Formation. Elevated TDS, chloride, and boron concentrations in the alluvium and on top of the Amnicola clay likely reflect groundwater that is mixed with oil-field water. Water chemistry and modern-aged groundwater in the alluvial monitoring well (MSBV #3) are consistent with the oil-field water in the alluvium being derived from documented historical surface disposal of oil-field water upslope (northwest) of the site. Water chemistry and pre-modern groundwater age in the deeper Tulare monitoring well (MSBV #1) on top of the Amnicola clay are consistent with oil-field fluids derived from upslope natural geologic sources or old oil wells that leak in the subsurface. Shallow groundwater in the Tulare (MSBV #2) is not affected by mixing with oil-field sources.

EarthArXiv↗
USGS2025

Examining the compositional selectivity of hydrocarbon oxidation products using liquid–liquid extraction and solid-phase extraction techniques

The effect of extraction methods on detecting hydrocarbon oxidation products (HOPs) in groundwater remains unclear. HOPs are polar, water-soluble byproducts of petroleum biodegradation. Our previous work showed that liquid–liquid extraction (LLE), a method commonly used in regulatory monitoring, has a significantly lower extraction efficiency for HOPs compared to solid-phase extraction (SPE). In this study, we evaluate the analytical limitations and compositional selectivity of LLE and SPE using groundwater samples from the Bemidji, MN, crude oil spill site. Optical properties were characterized using excitation–emission matrix spectroscopy (EEMs), and a three-component PARAFAC model was validated, showing consistent trends across both extracts and whole water samples. Ultrahigh-resolution mass spectrometry (UHR-MS) revealed that LLE selectively recovered aliphatic-like compounds but underrepresented more polar oxygenated HOPs. In contrast, SPE methods were more effective at isolating highly oxidized compound classes. These differences were consistent across a gradient of contamination. Overall, the LLE was less precise and less representative of polar HOPs, introducing bias in the characterization of HOPs. This study is the first to quantitatively demonstrate the compositional selectivity and analytical bias of LLE versus SPE for HOPs using combined EEM-PARAFAC and UHR-MS techniques, with implications for long-term monitoring and site assessment protocols.

Environmental Science and Technology↗
USGS2026

From model to action: Identifying the gaps in coastal marsh models for decision making

Coastal salt marsh modeling projects are designed to answer questions about where salt marshes may migrate, how they can migrate, and how they will be impacted by changing water levels. While this information is vital for climate-resilient marsh conservation, translating these findings into actionable results remains a challenge. The authors examined the actionability of marsh modeling efforts in the United States by analyzing data collected from semi-structured interviews of marsh model users ( n = 24) across two ongoing projects along the U.S. East Coast and the Gulf of America (Gulf of Mexico). By qualitatively analyzing the interview data, the authors found that the tasks of practitioners who use coastal marsh model outputs fall into three major themes: (1) marsh restoration, (2) planning with uncertainty, and (3) conserving habitat for marsh-reliant species. For each of these themes, the authors identify unmet needs, including high spatial resolution information for local planning, accessible descriptions of uncertainty to increase user confidence, and the incorporation of human dimensions data (e.g., human alterations to the landscape such as impoundments and culverts) for a comprehensive understanding of the coastal salt marsh. Marsh modeling projects should strategize how to fulfil these unmet user needs so that marsh modeling outputs can better support decisions related to marsh conservation and restoration.

Gulf of America, United States East Coast↗
USGS2025

Do Graviquakes exist?

The “Graviquake” model, proposed in 2015 as an alternative to the elastic dislocation model, posits that normal faults are passive features dominated by coseismic gravitational collapse into a dilated crustal wedge, and that normal faulting is fundamentally distinct from strike‐slip and reverse faulting. Developed using finite‐element modeling before the 2016 central Apennines earthquake sequence, the model was revamped based on interpreted Differential Interferometric Synthetic Aperture Radar data from these events and used as evidence for a gravitational collapse episode. However, this interpretation relies on miscalculated elevation changes and is not corroborated by independent geophysical and seismological observations. Our analysis exposes fundamental flaws in the Graviquake model. By assuming that faults are passive players, it underrepresents the dynamic role of strain accumulation and release in rocks adjacent to faults. The hypothesized rapid expulsion of overpressurized fluids appears inconsistent with observed diffusion rates and lacks supporting seismological evidence. Part of the uplifted–subsided volume imbalance is likely an artifact arising from data processing, and in part is a transient effect due to the delayed response of the lower crust. Moment tensor analyses detect no isotropic components indicative of gravitational collapse, and observed ground motion and stress‐drop levels remain fully consistent with elastic dislocation theory. In addition, finite‐element modeling of normal faulting replicates observed surface deformation without invoking a collapsing wedge. The Graviquake model proposes a representation of normal‐faulting mechanics that differs significantly from established models and observations. Gravity does play a role in normal faulting, but the elastic dislocation theory remains the definitive framework of fault mechanics. Reinterpreting the 2016 earthquakes as a cascade of gravitational episodes, based on incorrect data processing and modeling, fails to substantiate the Graviquake hypothesis. Persistence in advocating this model could mislead seismic hazard assessment and undermine our understanding of normal faulting.

Bulletin of the Seismological Society of America↗